eChapters

1. INTRODUCTION

Integrated Nutrient Management (INM) has become a widely practiced Hi-tech horticulture practice. It refers to maintenance of soil fertility and plant nutrient supply to an optimum level for sustaining the desired crop productivity through optimization of the benefits from all possible sources of plant nutrients in an integrated manner. Another important aspect of INM is for enhancing of the fertilizer use efficiency (FUE) by proper placement of fertilizer in close proximity to the rhizosphere of the highest root activity. Today, Integrated Nutrient Management has become one of the common practices among progressive horticulture producers.

INM involves proper combination of chemical fertilizers, organic manures, crop residues, nitrogen fixing crops and bio-fertilizers suitable to the system of land use under ecological, social and economic conditions. INM involves maintenance or adjustment of plant nutrient supply to an optimum level for sustaining the desired crop productivity.

Abstract

Tremendous changes in lifestyle, eating habits and shifting rural habitations are causing an irreversible change that is leading to manifold multiplication of health problems and these health issues have attracted the attention of every segment of the society in the recent past. Today foods are not intended to only satisfy hunger and to provide necessary nutrients for humans but also to prevent nutrition-related diseases and improve physical and mental well-being of the consumers. Due to increasing control over nutrition and health, consumers are becoming more proactive towards their health. In this regard, functional foods play an outstanding role and they are gaining public acceptance and there is great scope for value-added as well as health promoting food products in developing countries. Various terms have used for functional foods throughout the world such as designer foods, medicinal foods, nutraceuticals, therapeutic foods, superfoods, foodiceuticals, and medifoods. People are interested in foods which boost immune system, reduce the risk of diseases and improve health. The increasing demand of such foods can be explained by the increasing cost of healthcare, the steady increase in life expectancy, and the desire of older people for improved quality of their later years. Typically, a food marketed as functional contains added, technologically developed ingredients with a specific health benefit. These range of products cannot be truly classified as ‘food’ and a new hybrid term between nutrients and pharmaceuticals, ‘nutraceuticals’, has been coined to designate them. The development of functional foods involves the application of various food processing techniques such as microencapsulation of functional ingredients for controlled release, nanotechnology for the development of nanostructured (or nanotextured) food ingredients and delivery systems for nutrients and supplements etc. Inclusion of probiotic bacteria and probiotic supplements in various food systems has also become very popular and this is becoming a very vital sector in functional food market. Systematic RandD efforts are, therefore, required to develop health promoting foods for all segments of the society at affordable cost. Prior to promoting the developed health foods, it is of utmost importance to conduct clinical trials to ascertain safety and efficacy, and also establish appropriate regulatory framework for their distribution to masses. All these issues have been discussed in this paper and recommendations were drawn to formulate future research.

Pineapple [Ananas comosus (L.) Merr.] is an important commercial tropical fruit crop under the family Bromeliaceae. Centre of origin of this fruit can be traced back to Brazil, South America. It is eulogized as “Queen of Fruit” or “Friendship Fruit” or “Haven Fruit” or “Golden Queen”. The word ‘Pineapple’ came from the Spanish word “Pina” based on appearance of fruit which resembles a pine cone. Now, pineapple is termed as “Boon for dry land agriculture”. Pineapple is an introduced crop in India and was first introduced in Goa by Portuguese. The largest producer of pineapple is Thailand and India ranks 6th in the world pineapple production. In India, Tripura, Assam, West Bengal, Kerala are the leading pineapple producers. Pineapple is a CAM (Crassulacean Acid Metabolism), monocarpic (each stem flowers only once and dies after fruiting), herbaceous perennial plant (Baruwa, 2013) and is suitable for cultivation in xerophytic conditions (Baraily and Deb, 2018).

The earliest written references to pineapple are found in the reference of Christopher Columbus, Gonzalo Fernández de Oviedo y Valdés, and Sir Walter Raleigh. They found pineapple growing in the West Indies mainly for for food and wine making. The Portuguese sailors were responsible for early dissemination of the pineapple and introduced it to Saint Helena in 1502. They also carried it to Africa and India by about 1550. Cultivation of pineapple had spread over most of the tropical countries including some of the islands of the South Pacific before the end of the 16th century. Costa Rica, Brazil, China, India, and Thailand are now major growers of pineapple.

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

INTRODUCTION

Vegetables and fruits have many similarities with respect to their composition, methods of cultivation and harvesting, storage properties and processing. In fact many vegetables are considered fruits in the true botanical sense. But the difference between the two is that vegetables are derived from various parts of plants e.g. roots, leaves, stems, buds and so on whereas, fruits are the mature ovaries of plants with their seeds. The edible position of most fruits is the freshly part of the pericap or vessel surrounding the seeds. The other difference between the two is that those plant items that are generally eaten with the main course of a meal are often considered to be vegetables, whereas those that are eaten alone or as a dessert are considered as fruits. This is the distinction made by food processors, certain marketing laws, and the consuming publics.

Introduction

Quality of fish is affected by various factors, which are classified into two categories: intrinsic factors and extrinsic factors. Intrinsic factors are the chemical and physical properties inherent to fish. Extrinsic factors are treatments given to fish before and after catch until it reaches the consumer, which includes the method of catch, cross contamination, processing, preservation, and product storage environment (temperature, humidity, packaging). The processing methods such as drying, smoking, chilling, and salting greatly help to minimize the spoilage. The quality of fish is also dependent on cold chain, in which the temperature is managed and monitored at every stage of production, transport, storage and sale.

2.1. Pre-Harvest Factors

Pre-harvest factors relates to the intrinsic factors affecting the quality of fish, as they are beyond the direct control of human. Various intrinsic factors affecting quality are fish species, size, sex, physiological state, parasites, naturally toxic fish, pollutants, and occasional peculiarities. Additionally, some of the extrinsic factors like method of catch and feeding interruption for starvation are also considered as pre-harvest factors affecting the quality of fish.

2.1.1. Species Characteristics

The quality of fish is related to species. For instance, flat fish keep better than round fish. Post-mortem pH varies between species. For example, long rigor period and low pH (5.4-5.6) of very large flatfish and halibut give relatively long iced storage life of 21 days, while mackerel with low post-mortem pH has no effect on shelf life. Some fish are rated as good quality as they are expensive, example, seer fish and pomfret. Fatty fish are rejected sensorial before lean fish due to the appearance of oxidative rancidity. So, lean fish keep longer than fatty fish under aerobic storage. Bony fish are edible longer than cartilaginous fish. Skin of fatty pelagic fish is very thin and contribute to faster

spoilage rate, as it allows enzymes and bacteria to penetrate more rapidly. Thick skin and slime of flatfish contribute for better keepability, as slime contains bacteriolytic enzymes, antibodies and other antibacterial substances.

Introduction

The risk assessment is gaining importance as the scientifically-based approach for the development of food safety and quality standards. It is a logical extension of HACCP revolution. In hazard analysis, first the hazards likely to occur in foods are identified, then an assessment is made of the severity of each hazard, and an evaluation is done of its likelihood to occur. Severity and likelihood are the two factors involved in risk assessment. Second, the increase in international trade has raised new safety and quality challenges. New approaches address the risk of cross-border transmission of infectious and hazardous agents with emerging food-borne diseases and quality problems. This has led to the development of a new safety and quality regulatory framework in 1995, the Sanitary and Phytosanitary (SPS) and the Technical Barriers to Trade (TBT) Agreements of the World Trade Organization (WTO). In these two Agreements, two provisions are of importance to fish safety and quality:

• National SPS and quality requirements should reflect standards agreed on in the international standards setting bodies i.e. Codex Alimentarius for food quality and safety.

• Domestic standards can be developed based on scientific risk assessment.

Risk assessment of microbiological hazards is identified as a priority area by the Codex Alimentarius Commission (CAC). In 1999, the Codex Committee on Food Hygiene (CCFH) in the 32nd session, identified a list of 21 pathogen commodity combinations that require expert risk assessment advice. FAO and WHO jointly launched a programme with the objective to provide an expert advice on risk assessment of microbiological hazards in foods to their member countries and to the CAC. Under which, expert groups are established to examine four priority pathogens: product pairings, e.g. Listeria monocytogenes in ready-to-eat food; Salmonella in eggs and broiler chickens; Campylobacter spp. in broiler chickens; and Vibrio spp. in seafoods. Risk assessment is therefore important throughout all aspects of the seafood industry - for companies, national governments and for international regulators.

1. Introduction Millet is a heterogeneous group of small-seeded cereal crops classified based on their morphology as major millet and minor millet. Little millet (Panicum sumatrense) are small millets generally categorized as minor millet cereal crops. It is a self-pollinated crop that belongs to the family Poaceae and subfamily Panicoideae with a chromosome number of 2n=36 (Nandini and Bhat, 2019). It is a traditional cereal grain crop widely produced in India, Pakistan, Sri Lanka and Western Myanmar. Little millet is widely cultivated in the tribal belt of Madhya Pradesh, Bihar, Chhattisgarh, Andhra Pradesh, and Tamil Nadu in India for food and feed (Ganapathy, 2017). Indigenously, it is commonly known as samai (Tamil), kutki (Hindi), savior same (Kannada), chama (Malayalam) (Table 1).

Abstract

The increasing interest in polyphenolic compounds in industries has led to the exploration and exploitation of rich bio-compounds from natural sources, essentially plants and their by-products. Solid-liquid extraction is mostly applied for the recovery of these valuable compounds from plants. Since the extraction process is often difficult in a fresh matrix, a drying operation is needed to reduce the moisture content, and preserve the targeted valuable compounds. An uncontrolled drying operation will lead to product damage and hence, loss in quality, reason why, several studies have been carried out to understand and control the drying process. The present chapter aims to present some data on drying for bioactive compound recovery from plants and their by-products, mainly polyphenolic compounds. Our main interest is the mathematical tools used to model the drying process.

Introduction

Over centuries, spices have been used as an important addendum for colour, flavour and preservation of foods. In addition, their medicinal and cosmetic utilities have been widely recognized (Purseglove et al., 1981; Srinivasan, 2005). All these benefits made them extremely desirable with an ever growing demand in the international market. India holds the title of the largest producer and exporter of spices with major share for pepper, capsicum, turmeric, ginger cardamom, seed spices, curry powders, spice oils and oleoresins. The other primary producers of spices includes China, Indonesia, Malaysia, Egypt, Turkey Brazil and Mexico while USA, Europe, Japan, East Asian and Middle East countries are their major importers.

Spices are made from diverse plant parts viz. rhizomes, barks, leaves, fruits and seeds and hence its processing methods vary depending on the raw material. However, the basic unit operations namely harvest, pre-treatment, drying, cleaning, particle size reduction, packaging and microbial decontamination in sequence remains common for the production of most of the spices. Inappropriate conduct of basic unit operations often lead to high microbial load, aflatoxin contamination, losses of valuable compounds, change in sensory characteristics, physical damages and incorporation of contaminants in spice products (Table 1). Moreover, spices being natural products, they may be fraught with a large number of microorganisms including several pathogenic species of bacteria and fungus depending on the prevailing conditions in their cultivation areas. In addition, poor food sanitation awareness and practices in spice producing countries may worsen their microbiological safety. Although spices are nonperishable in nature due to their low moisture contents after drying, they may act as a source of microbial populations upon contact with moist food products with no further thermal treatment. The outbreak of ‘salmonellosis’ in Germany (1993) due to contaminated paprika and paprika-powdered potato chips is an example. The aforesaid disadvantages related to conventional spice production may confound their international trade unless desired objectives of food safety management schemes such as International Commission on Microbiological Specifications for Foods (ICMSF) are met. Moreover, international agencies have set standard to guarantee safe spices and augment business interests of their adherents. For example, both the European Spice Association (ESA, 2015) and American Spice Trade Association have set a maximum level of 1% w/w extraneous matter in spices (ASTA, 2017). These challenges associated with the conventional production system may be effectively addressed by preventive risk management strategy by which suitable control measures are enforced at earlier phases of food chain prior to consumption. The control measures must guarantee that the level of contamination has not exceeded the maximum permissible limit at every phase of spice production from farm to table.

1. Introduction Millets are the oldest crops known to mankind. They are mostly cultivated for human consumption however; some are also used as animal fodder. Barnyard millet Echinochloa frumentacea is a multi-purpose crop belonging to the kingdom plantae, order-poales, family-poaceae, subfamily-panicoideae, genus-Echinochloa & species-E. frumentacea. It was domesticated about 4,000 years ago with two main species: Echinochloa esculenta (Japanese barnyard millet) and Echinochloa frumentacea (Indian barnyard millet). The former species is mainly grown in Japan, Korea, and northeastern China, while the latter is grown in Pakistan, India, and Nepal. In India, barnyard millet is grown in the Himalayan region from the north to the Deccan plateau in the south and is popularly known as jhangora or sawan millet.

Introduction

The international fish trade increases day by day reaching to a tune of USD 151 billion in 2020 (FAO, 2022). Many developing countries like India gain benefits from this trade as income through net foreign exchange reached to a level of 8.09 billion USD in 2019-20. Seafood supplied by developing countries contribute to 77% of fish consumption worldwide. The European Union (EU) is the single largest market for fish and fishery products to a tune of 91.74 billion USD in 2022 as a consequence of an increased per capita consumption among its Member States. Spain, Italy, Germany and the United Kingdom are the largest importer of fish and fishery products.

To protect consumer health and to protect the territory from the introduction of animal and plant diseases, the European Community (EC) has laid down joint conditions for imports of foodstuffs. The Directorate General for Health and Consumer Protection (DG SANCO) is responsible for food safety in the EU. The import rules for fishery products are framed of high standards with respect to hygiene, consumer safety and animal health status. It is important that importing countries and food business operators (FBOs) must understand the fundamental principles and requirements of the European Food Law to ensure efficient and smooth imports. The EU system relies on Government to Government assurances without any intervention of any private type certification or standards. The Competent Authority (CA) in the country of origin is responsible for giving the official guarantees to the EU regarding compliance and conformity to all requirements of its legislation. The Export Inspection Agency (EIA) is the Competent Authority in India for issuing the required official guarantees for export of fish and fishery products. The EIA maintains a complete list of all establishments under its control.

Abstract

Microencapsulation has found great applications in food business. However, the technology remains aloof from being fully exploited. Microcapsules offer food processors a way to shield sensitive food ingredients, mask or preserve flavours and aromas and conversion of volatile food components into easy-handled solid ingredients (like powders, capsules etc). A number of naturally occurring and synthetic polymeric materials have been identified so far that possess the entrapping property and are categorised as GRAS materials. Numerous techniques have been developed for using these entrapping materials to encapsulate the sensitive food ingredients. Controlled release of the food ingredients at proper place and right time could be therefore a key practicality that may be provided by microencapsulation. With strictly fine-tuned and stabilized release characteristic, this method adds worth to the merchandise. The areas of interest in this field include the development of alternative and inexpensive polymers that may be considered natural or mimic the properties of natural polymeric materials, like Gum Arabic, Gellan Gum, Gum Karaya, Gaur Gum and Gum Acacia. Limitations in many of the encapsulation techniques have occurred due to high value of raw materials and production. This review is effectively committed to the, properties of encapsulating agents along with the emphasis on different techniques used for encapsulation in the varied fields like food technology, pharmaceutical, commercial engineering and biotechnology.

ABSTRACT

Green technologies are required in the field of food processing and production in order to achieve food security and to reduce adverse environmental impact. Application of nano technology in food processing and production can advance the food safety and quality, increase the bioavailability of nutrients and thereby improving human health. Nanotechnology can be applied to achieve green perspective like development of biodegradable packaging materials thereby reducing adverse environmental effect. Use of naturally occurring nanoparticles as additives can reduce the use of chemicals in food products. This chapter deals with the potential of nanotechnology to achieve green aspects in food processing and production.Main focusses are on achieving food security and environmental sustainability. Chapter also describes about the principles of nanotechnology and methods to achieve green aspectin food sector with the application of nanotechnology. Application of nanotechnology in food processing and production along with safety, regulations and accompanying laws are discussed in this chapter.

Introduction

Nutrition is the study of how food and nutrients affect the body’s health and well-being. It encompasses all aspects of food, from the food production, processing, consumption and digestion by the body. A balanced diet included all the essential nutrients such as carbohydrates, protein, fat, vitamins and minerals for maintaining good health. The recommended daily intake of nutrients varies depending on the age, gender and physical activity of a person. The nutritional need also varies depending on the lifestyle and medical condition of a person. The nutrition facts are based on recommended daily intakes for various nutrients, which vary based on factors such as age, sex, and physical activity. These facts are given on food packaging or label, providing important information on the serving size, calories, macronutrients and micronutrients, and other ingredients.

Nutrition labels are mainly intended to guide the consumer in food selection. Nutrition information provided on labels must be true and should not mislead consumers. Nutrition labelling regulations are provided by countries to help manufacturers. The Codex guidelines on Nutrition Labelling provide guidance to member countries to develop or update their national regulations and to encourage harmonization of national standards with international standards. According to it, no food should be described or presented in false, misleading or deceptive way. Nutrition labelling cannot solve nutrition problems, instead it is one of the elements of nutrition policy.

11.1. Nutrition Facts

Nutrition Facts means the nutritional information required for most of the packaged food in many countries giving the energy value and nutrients contained in the food. Nutrition facts labels are required by regulation similar to other types of food labels. It provides detailed information on the nutrient content of the food such as the amount of fat, sugar, sodium and dietary fiber.

INTRODUCTION

Food is the basic need of human beings. It gets spoiled primarily due to microorganisms and enzymes. Energy is required for microbial growth and enzymatic reactions. At low temperature, the rate of biochemical reactions is slow resulting in prolonged storage life of food. It must have been observed long back that food could be stored for longer period without deterioration during the winter months. Since then this principle is being used to extend the storage life of foods. A sea change can be observed in development of low temperature preservation technology. It has travelled a long journey to reach this stage; however, a major break through took place in twentieth century. Low temperature technology is of two types; refrigeration and freezing. In refrigeration storage, water is in liquid phase and temperature is maintained above freezing point. In freezing technology, the food is stored below freezing point and water gets converted into ice. The former is short term preservation due to slow growth of microbes and lower enzymatic activity while the later is long time preservation due to inactivation of enzymes during blanching and inhibition of microbial activity due to unavailability of free water and much lower temperature. Low temperature preservation is widely accepted and is of commercially important in food supply chain.

The history of plant growth regulation was knownfor many years before the time of Christ, when it was common practice in the Middle East to place a drop of olive oil on figs to promote development. The use of plant growth regulators (PGRs) to modify growth and flowering of pineapple began in 1930s. In eighteenth century when a carpenter was working in a greenhouse in the Azores Islandaccidently set fire to a pile of shavings. To the surprise of the grower who had thought his plants were ruined, they burst into flower instead of being damaged (Collins, 1960). In Hawaii, Rodriguez (1932) noticed in the pineapple fields that smoke from brush fires adjacent to the field caused premature flowering. The ingredients of smoke were subsequently found to be ethylene and acetylene, the unsaturated hydrocarbons. During the 1940’s, auxins were also shown to produce this effect,α-Naphthalene acetic acid (NAA), β-Naphthalene acetic acid (BNA), Fruitone and naphthaleneacetamide were the next forcing agent to become commercially used in pineapple. Since that time many works have been carried out with improving results like natural and synthetic compounds that alter function, shape and size of crop plants have been discovered. Today, specific PGRs are used to modify crop growth rate and growth pattern during the various stages of development from germination through harvest and post-harvest preservation. The use of regulating chemicals has become an important component of agro-technical procedures for most of the cultivated plants and especially for fruit plants.

ABSTRACT

The commencement of the 21^st century has endorsed an extended requirement for safe and wholesome food. The fact is that consumer preferences, awareness and their concern towards food safety have been tremendously increased. Therefore, inactivation of pathogenic microorganisms through any treatment becomes essential for food processors to ensure that food is free from disease causing microorganisms and parallelly unaltered with respect to its organoleptic, functional and nourishing characteristic. Food industries predominantly adopt thermal inputs for the preservation of food. Thermal methods, however, lead to unfavourable changes in organoleptic and nutritional attributes, more particularly proteins and vitamins. Hence, there has been continuous development and advances in finding alternatives to conventional processing. Cold plasma technology is one such technique. Plasma can be defined as a quasi-neutral ionised gas and is more commonly termed as 4^th state of matter. Advances in plasma engineering have made it possible to generate plasma at atmospheric pressure which ultimately resulted in broadening the spectra of research on cold plasma at various interfaces of biological sciences. This chapter summarises the overview of cold plasma technology processing, numerous findings related to its application in the area of food decontamination, food fortification, seed germination, milk and milk products and modification of starches.

Keywords: cold plasma, non-thermal, plasma chemistry, fortification, modification, germination, plasma generation, novel

Pineapple is an important tropical fruit crop of India introduced by Portuguese from Southern Brazil early in the 16th century. It is a versatile fruit acting as a rich source of nutrients in many favourite recipes. In addition, it is an excellent source of vitamins, minerals, and antioxidants,highlighting its role as anti-inflammatory, digestion, and immunity support.It resembles epiphytes where roots are sensitive to poor soil aeration (Joy and Sindhu, 2012). In the present day, the demand for pineapple is increasing gradually in different parts of the country. However, insect-pests infestation turns out to be one of the major impediments in its quantum of production.

Pineapple is infested by several insect pests like mealy bug, scale insect, thrips, fruit borer, white grubs, bud moths, midges, fruit flies, termites etc. during its entire crop duration. However, Mealy bugs appeared as the key pest of pineapple while otherslike scale insects, thrips and fruit borer could cause economic damage to the crop only under favourable environment. Therefore, emphasis must be given for development of suitableecofriendly management techniques by proper prophylactic (cultural, mechanical, biological etc.) and protective measures to reduce the insect-pest population below the economic damage through proper monitoring and regular survey of the crop field.Thus, this chapter emphasizes on the important insect-pests infesting Pineapple along with their appropriate management options.

1. Introduction According to the United Nations Food and Agriculture Organization, 780 million of the estimated 792.5 million malnourished people globally are in countries that are developing. Despite expanded agricultural production, “hidden hunger,” which is often caused by a shortage of vital micronutrients in daily meals, affects around 2 billion people worldwide. Majority of the population is relying on plant-based diets which are critical for sustaining nutritional security and are the primary source of nutrients required for optimal growth and development. Most of these diets are found deficit in major nutrients such as proteins, iron, calcium and Vitamin B12.However, a considerable number of Asian and African populations suffer from nutritional inadequacies as a result of consuming plant-based diets (Tripathi et al., 2019). Earlier, the main concern of farming systems was crop productivity and yield. However, there has been a shift in emphasis toward human health and well-being.