eChapters

ABSTRACT

The rapid growth in population has created the need of industrialization and as a result there has been a significant increase in milk production and processing. Milk is a commodity which is consumed by persons of all age groups due to its nutritive value and health promoting attributes. However, the rapid growth in dairy sector has adversely affected the environment by emitting various greenhouse gases and thereby, resulting in global warming. Apart from it, there has been an increased usage of non- renewable resources like natural gas and coal in dairy sector. As a result, a viable balance has to be maintained between milk production and processing, environmental health and the rapidly growing population. This can only be achieved with the application of green or environment friendly technologies in all the stages of milk production and processing. This chapter will mainly deal with the various sources of greenhouse gases from dairy sector and on application of life cycle assessment and carbon foot printing for computing the impact of greenhouse gases on the environment. Also, this chapter will enclose various green technologies which can be applied in dairy sector to curb the greenhouse gas emissions.

Keywords: Carbon footprint, LCA, Greenhouse gases, Green Technology, Milk production, Milk Processing

4.1 Phases of technology transfer
To translate laboratory research into market ready product, it is important to understand steps or phases involved in this technology transfer process. The process typically includes six main phases, each with a different role (figure 9).
4.1.1 Research
Technology transfer begins with research, the critical stage of exploring and discovering novel knowledge, technologies, or innovations that may have potential commercial applications. The research phase can occur in academic institutions, research organizations, or private sector companies, often funded by public or private sources. Thorough research ensures that the technologies being transitioned are scientifically and technically robust, thereby increasing their potential for market success. Therefore, the research phase involves creating and evaluating new ideas, confirming their feasibility, and identifying IP prospects, all of which are key components of TT success.
4.1.2 Innovation disclosure
Innovation disclosure is the first formal step where the innovation is reported to the appropriate TTO or IP management team. This process ensures that the institution or organization recognizes the innovation and evaluates its potential for protection and commercialization. It includes following information:

Introduction

Chickpea (Cicer arietinum L. ) popularly known as Gram, Bengal gram, Egyptian pea, Chana, or Kabuli chana, Garbanzo bean is one of the first grain legumes to be domesticated by humans in old world (Van der Maesen, 1972). The genus Cicer belongs to the sub-family Papilionaceae of the family Leguminoceae (Bentham and Hooker, 1970) now popularly known as ‘Fabaceae’ and have chromosome number 2n = 2x = 16. The origin of the crop is considered to be Western Asia from where it has been transferred in India and other parts of the world (Rathore and Sharma, 2003). Importance of pulses is relatively more in our country as its contribution in nutrient supply is far more in Indian diet than that in Asia and world as a whole (Ali,2002).

Introduction

Agriculture is the most important sector of Indian Economy. The agriculture sector accounts for 18 per cent of India’s gross domestic product (GDP) and provides employment to 50 per cent of the countries workforce. India has emerged as the second-largest producer of fruits and vegetables in the world. Formerly agriculture was more dependent on nature and all the operations were carried out manually, however new technologies have been developed to increase the production and productivity of crops (Rangbhal, 2018).

Introduction

The drying of fruits and vegetables during the season of abundance in order to preserve them for consumption during season of shortage is an ancient practice. Thus, drying is one of the oldest methods of preservation of the food commodities. It is practiced from ancient times and is a very common method of preservation in the tropical countries like India where conditions are much more favorable for sun drying. All micro-organisms need moisture to grow. So the removal of water in the food is brought down below a certain level at which they are unable to grow. Moisture content from food can be removed by different methods like sun drying (very oldest method and most popular), solar drying, cabinet drying, mechanical drying, tunnel drying, poly tunnel drying, adiabatic drying, spray drying, osmotic drying, fluidized bed drying etc. Grains are mostly dried in the sun. The moisture content of the grains can be reduced to a limit that is safer for their storage by sun drying. Many fruits and vegetables can also be dried by using sun energy. Some coastal areas of the countries fishes are also dried by exposing to the sun. After drying, sometimes the dried products are converted into powder. However, these powders are very hygroscopic and should be packed in airtight. Mango powder is prepared by this technique, but expensive and not popular in India. Nowadays many artificial methods have been developed for removal of the moisture. The relationship between the moisture content and temperature of air during process is referred as Psychrometric relation. An instrument used to measure the humidity (Relative humidity) of the atmosphere is known as Psychrometer (Hygrometer). The residual moisture in vegetable should not be more than 6-8% and in fruits it should be in the range of 10-20%. The dried fruit can be used as such or after soaking while dried vegetable are usually soaked in water overnight and then cooked. Vegetable are considered to be dry when they become brittle. There are generally two drying methods for foods like 1) Natural drying and 2) Artificial drying. The preservation / stability of the dehydrated products is conferred by the abstraction of water, so that the product is unable to support the microbial growth, its chemical forms of deterioration is inhibited and the drastic reduction in the weight / volume facilitate easier handling and marketing. Among dehydrated products, dehydrated onions have largest share of 45%. India is the third largest exporter of the onions in the world next to the Netherland and Spain. Besides this, India exports dehydrated bell pepper, garlic and mushrooms.

The dairy processing industry in India deals mainly with the fluid milk and/or short shelf life products, despite India being the largest producer of milk in the world, with an output bordering the 110 million ton mark. This feature offers immense potential in the area of R&D in dairy processing in terms of value addition. The potential gains are many, including higher returns for producers and advantages in terms of health, therapeutic, nutritional and/or gastronomy for the consumers. However, the Indian Dairy Industry can amass possible benefits by being a global contender in trade only when its products are at par with those available in the rest of the world in terms of price and quality. It is evident from the post-WTO scenario that for sustainability, Indian dairy industry will need to maintain wholehearted commitment to quality management right from the farm to the consumer, shedding its inhibitions and resistance to changes.

9.1. WTO Agreements and Food Industry

The General Agreement on Tariffs and Trade (GATT) was formed in 1947 and lasted until 1994, when it was replaced by the World Trade Organization (WTO) in 1995. The WTO is the only global international organization dealing with the rules of trade between nations. It provides a forum for negotiating agreements aimed at reducing obstacles to international trade and ensuring fair deal for all, thus contributing to economic growth and development. Currently, there are 16 agreements to which all WTO members are parties and two agreements to which only some WTO members are parties. WTO currently has 153 members, of which 117 are developing countries or separate customs territories. The Head Quarters of WTO is at Geneva (Switzerland) and the official languages are English, French and Spanish.

Introduction

Nutrition is the fundamental pillar of life and an essential foundation of human and national development. Rightfrom the earliest stage of human development, the fetal stage, at birth, infancy, childhood, adolescence, adulthood and old age, nutrition forms the basis for survival, performance, mental and physical development & economic and social development.Nutritional deficiencies during pregnancy, fetal and early postnatal life can have a negative impact not only on the subsequent growth and development but can also lead to changes in metabolic regulation and homeostasis.

E numbers : Each food additive used in the food industry has been given a specific number code for their identification. These numbers are called as E numbers. These E numbers are used within the European Union. The word prefix “E” stands for Europe. They are commonly used on the food label through out the European Union. These are not used in Australia and New Zealand. The different food additives are given different E numbers depending upon the type of food additive like E100-E199 (food colours), E200-E299 (preservative), E300-E399 (antioxidants), E400-E499 (thickners, stabilizers, emulsifier), E500-E599 (pH regulator, anticaking agent), E600- E699 (flavour enhancers), E700-E799 (antibiotics), E900-E999 (miscellaneous like waxes, synthetic glazes, packaging gases, sweetners, foaming agents), and E1000-E1099 (additional chemicals).

Cakes are sweet baked products characterized by high level of sugar in the formulation and hence are foods of high calorific value. Among the various ingredient used flour, sugar, shortening and egg are the essential ingredients for cake manufacture. The optional ingredients are baking powder, milk, fruit etc. For cake manufacture the selection of ingredients is of paramount importance.

Introduction

Increased awareness about the food safety and various adulterations or crises reported in food industries, the food quality and its safety has emerged as the most important features of the modern food processing and preservation. The important historical dynamics which raised the concerns of food safety were motivated by accidents related to food borne pathogens and chemical contamination during the food processing and distributions. Many times, the terms food quality and safety are interchanged however, there is a difference in terms of their perception by the consumers and manufactures. In past few years, the food safety has become the characteristic of food quality and has been regulated by various national and international agencies. The increased concerns about the safe, nutritious and high quality food has over the time forced the public authorities to engage the food industries to construct the quality management systems in order to improve the food safety and build the consumers believe and trust towards processed foods. Food quality is a broader concept which includes food health quality attributes along with parameters like sensory characteristics like taste, smell and convenience like food preparation (Röhr et al., 2005). The food qualities like nutritional, convenience and sensory are not requested by the public laws but are desired by the consumers. The management systems for the quality assurance have evolved over the time and now we have systems like HACCP. ISO 9000 and ISO 14000 in place which are well known quality management modules to ensure the elimination of food hazards. On a broader scale of trading food several technical agreements under WTO (world trade organization) have been made which provide equal opportunities to all countries to trade the goods however, it imposes the similar food quality standards across all the participatory members. The responsibility of food safety is directly connected with all the stakeholders of the food chain which include manufactures, processors, farmers, food handlers and finally the consumers. Food contaminations may be a result of poor manufacturing practices and poor storage and handling practices at any stage in the food chain. To ensure the safety compliances, national food regulatory models plays a significant role. The guidelines issued by FAO/WHO, 2003 are focused on the public organizations, as well as food control authority self-assessment to ensure highest food quality and its safety from farm to fork. The base of the assessment includes 6 factors viz. food inspection, food quality management, food safety, official food control laboratories, food legislation food and quality information, education and communication (Shukla et al., 2014).For effective implementation of the food safety and quality module the countries have developed various food laws and legal norms which states the principles to be followed for raw materials, their processing and distribution in order to achieve the consumer expectations as well as the hidden food safety concerns.

Introduction

It is the process of retaining food over a period of time without being contaminated by pathogenic organisms or chemicals and without losing its colour, texture, flavour and nutritious value. It involves preventing the growth of bacteria, fungi and other microorganisms, as well as retarding the oxidation of fats which causes rancidity

Objective

• To increase its shelf life, retaining original nutritional values, colour, texture, and favour.

HACCP : The Hazard Analysis and Critical Control Points (HACCP) is a scientific, rational and systematic approach to identify, assess and control hazards during production, processing, manufacturing and use of food. It ensures safety of the food. HACCP presents a good opportunity for the food industry for upgrading quality and bringing uniformity and consistency in their supplies to international market. or It is a systematic preventive approach to food safety that addresses physical, chemical and biological hazards as a mean of prevention rather than finished product inspection. It involves identification, evaluation and control of hazards which are significant for food safety.

Research methodology gives detailed justification about the research methods and procedures carried out in the present study. The present study focuses on the women’s involvement in the dairy farming and their empowerment. Keeping in view the specific objectives of the study and various aspects relating to these objectives the methodological framework has been formulated. The sub topic under the research methodology is as follow:

3.1 Locale of the study

The present study entitled “Retrospective Multidimensional Study on Magnitude of Participation of Women in Dairy Farming in East district of Sikkim” was carried out in the villages of East district of Sikkim. Sikkim is the second smallest states in India, with an area of 7,096 sq. km in size. The meaning of Sikkim is “The valley of rice”. It lies between 27 º33' 00" N and 88 º30' 00" E. The average annual temperature of the state is 18 ºC (64 ºF) and annual rainfall is 2739 mm. The state is situated in the Eastern Himalayas and it shares its border with countries like Tibet, Nepal and Bhutan. Mt Kanchendzonga (8585m) which is the third highest peak in the world is situated at Sikkim. According to 2011 census, population of state was 610,577 with male population of 323,070 and female population of 287,507. The literacy rate in the state is 81.40 percent. The density of the state is 86 people per km2 (Census,2011). The cattle population in the state was 264,860 in number (BAHS,2019). The state has four district- East, West, North, and South (Registrar General of India, 1989).

Millions of people worldwide suffer from food insecurity and malnutrition, which are exacerbated by issues including pollution, overcrowding, climate change, and economic hardship. These problems highlight the necessity of changing food systems for better immunity and health since they lead to both undernutrition and overnutrition. Essential carbs, fiber, fats, and important micronutrients including iron, calcium, potassium, zinc, and magnesium are all found in nutrient-dense grains such as foxtail, kodo, proso, tiny, and pearl millets. These millets are widely accessible and have several health advantages. For example, pearl millet is high in amylose starch and contains essential minerals like phosphorus and magnesium, whereas proso millet is a good source of iron, calcium, potassium, and B-vitamins. B vitamins, iron, calcium, and zinc are all found in kodo millet, while finger millet is a great provider of calcium, iron and magnesium. The nutritional profile of millets is further improved by processing methods like milling, germination, extrusion, and fermentation. Prominent research organizations, including as ICRISAT, ICAR, and CGIAR, are actively working to conserve millet and create better types to combat chronic illnesses and malnutrition. Targeted improvements in disease resistance and nutrient content are now possible because to biotechnology advancements. For improved worldwide health outcomes, dietary patterns must nonetheless be changed and these nutrient rich grains incorporated into contemporary food systems, notwithstanding current advancements.

India’s bakery market at 49.5 billion tonnes makes it the third largest market in Asia Pacific, only after Japan and Australia. 72 The bakery industry in India comprises of organized and unorganized sectors. The organized sector consists of large, medium and small-scale manufacturers who produce packaged biscuits and bread. The unorganized sector consists of small bakery units, cottage and household type manufacturing their goods without much packaging and distributing their goods in the surrounding areas. Bread market is estimated to be growing at around 7% p.a. in volume terms, whereas the biscuit market has witnessed a higher growth at around 8–10%. Within the biscuit category, cream and specialty biscuits are growing at a faster rate of 20% p.a. The per-capita consumption of biscuits in India is around 900 gm as compared to 15–20 kg. for developed countries. The consumption of biscuits is equally divided between the urban and rural population. Demand for biscuits in 2003–2004 is likely to exceed 1.2 million tonnes.

10.1. Introduction

When it comes to packaging, plastics are still popular because of durability, versatility, economic production, and enhanced mechanical properties. However, with growing concerns about the impact of plastics-based packaging on the environment, edible and biodegradable packaging were introduced. The application of edible and biodegradable packaging promotes renewable resources, which greatly reduces environmental concerns and fulfil the packaging requirements. The sources employed to develop edible and biodegradable packaging are mainly plant-based biopolymers like cellulose, proteins, starch, and lipid. Moreover, the properties of the packaging material are decided by the proportions of these biopolymers. Hence, selecting a food commodity to be package is equally important as selecting suitable resources for the development of edible and biodegradable packaging.

12.1. Introduction

Food Packaging is a means to ensure safety and quality of food product throughout storage, transportation, handling, distribution, retailing, sales and in some cases till the intended use. International trades in food are generally guided by Codex Alimetarius Commission (CAC) (A joint body of World Health Organization and Food & Agricultural Organization). CAC works in harmonization within the context of food standards, food packaging and the applied rules. The mandate of Sanitary and Phytosanitary Measures (SPS Agreement) and Agreement on Technical Barriers to Trade (TBT Agreement) is to facilitate food trades and remove restraints at possible extent. Through these agreements, member countries have provision to apply quality and safety measures to safeguard the consumer. Such measures extend to every aspect of food and its packaging. On the other side, food packaging industries also progressed with sound technological advancement and sophistication in the last three decades. Innovations in food packaging attracted consumers due to convenience, availability, safety, quality and preservation throughout shelf life of the food product. 

Introduction

Carbohydrates constitute nearly 80% of the total dry matter of wheat kernel. Starch is the predominant form, with cellulose, hemicellulose and pentosans present in lesser amount. Starch is present in discrete granules within the cells of the endosperm. Starch content is available in the range of 65% to 75% and generally related negatively to the protein content. Starch structure is a crucial determinant of many end-product uses of wheat. While the amylose /amylopectin ratio is a useful descriptor of starch structure, a more complete analysis of the population of the molecules which constitute a particular starch is considerably more revealing. The molecules range from the high degree of polymerization (10⁷ – 109 glucose units) and heavily branched amylopectin population, to the lower degree of polymerization (103 -106 glucose units), and infrequently branched amylopectin population. Starches with widely differing structures are suited to particular end uses. For example, starches with no amylose, the so called waxy starches are particularly suited to use as thickeners or gel forming agents because they form a clear stable gel with little retrogradation. In contrast, starch with high amylose content form hydrogen bonded insoluble aggregations which are suited to use in adhesives, plastics and as a source of dietary-fibre starch. The size and branching pattern of starch are also important determinants of the suitability of starches for particular end-uses due to the effects these parameters have on gelatinization temperature, starch swelling and viscosity.

Introduction

Functional elements are non-conventional biomolecules in foods that have the ability to modulate one or more body metabolic processes or pathways, leading in health advantages and well-being promotion. Research has demonstrated a connection between food, health and well-being functional elements. Consequently, functional elements have health-promoting roles connected with multiple progressive steps at various phases of disease control, from initiation to growth. They can therefore be implemented efficiently in disease therapy and prevention. Therefore, the borderline between food and medicine is becoming very thin at a moment when the role of a healthy diet in stopping non-communicable diseases is well recognized. Functional elements include plant-derived, non-nutritious and biologically active chemicals that operate in the body to avoid certain non-communicable diseases from occurring.

Food contains over 900 phytochemicals. One fruit or vegetable serving (about 120g) can contain as many as 100 distinct phytochemicals. Previously, functional elements were believed to happen predominantly only as phytochemicals in plant products including whole grains, fruits and vegetables. However, in animal goods such as milk, fermented dairy products and cold water fish, probiotics, conjugated linolenic acid, long-chain omega-3, −6 and −9 polyunsaturated fatty acids and bioactive peptides are also discovered. Usually, functional elements happen in various forms in food such as glycosylated, esterified, thiolated or hydroxylated materials. They also have numerous metabolic operations that enable positive impacts in the body on several illnesses and target tissues (Balic et al. 2020).

Abstract

Enzyme is a highly efficient catalyst that is produced by active cells. When compared to chemical catalysts; enzymes have a number of benefits, including high specificity, high catalytic efficiency and flexible activity, all of which greatly help to promote their use in the pharmaceutical, chemical, and food sectors. The majority of enzymes such as protease, amylase, lipase and cellulase are relatively unstable and industrial uses are frequently restricted by a lack of long-term operational stability as well as the technically challenging recovery process and ruse of the enzyme. Enzyme immobilization provides an excellent base for increasing enzyme availability to the substrate with higher turnover over a long period of time. Enzyme immobilization are done by several methods and their performance are influenced by many factors. Physical and chemical based immobilization are the most commonly used methods. The matrix immobilizes the enzyme by holding it permanently or temporarily for a short stretch of time. The generally used matrixes for immobilizations includes natural, synthetic polymers and inorganic compounds.Currently, synergistic interactions of biotechnology and nanotechnology are useful for the development of immobilized enzymes. Enzyme immobilization is a commonly used technology in a variety of industries including food, pharmaceuticals, bioremediation, detergents, and textiles due to technical and economical advantages. This chapter focuses on most commonly used immobilized techniques in industry with many recent applications of immobilized enzymes.