eChapters

Dahi: It is the product obtained from pasteurized or boiled milk by souring, natural or by harmless lactic acid or other bacterial culture. It is also called Curd (Plate 209).

Dairy: It is a room, building, or establishment where milk is kept and butter / cheese is made or it is the department of farming / farm that is concerned with the production of milk, butter, and cheese or an establishment for the sale / and distribution of milk and milk products.

Dairy husbandry: It deals with care, breeding, feeding, milking of the diary cattle and the production and sale of the milk. It is the economical management of a dairy, including looking after the dairy cattle breeding and proper disposal or sale of milk and milk products.

Dairy products: These are the milk preparation, including butter, cream, cheese, ghee, yoghurt, pasteurized milk, tonned milk, butter milk etc processed and prepared in dairy. Ice cream and kulfi or sweets are not included in this.

Damage: Damage is a physical spoilage, often a partial deterioration, are subjectively judge and very difficult to measure and usually reported as per cent damage.

Daminozide: It is a growth regulator which is used for red colour development in apple.

E numbers: Each food additive used in the food industry has been given a specific number code for their identification. These numbers are called as E numbers. These E numbers are used within the European Union. The word prefix “E” stands for Europe. They are commonly used on the food label through out the European Union. These are not used in Australia and New Zealand. The different food additives are given different E numbers depending upon the type of food additive like E100-E199 (food colours), E200-E299 (preservative), E300-E399 (antioxidants), E400-E499 (thickners, stabilizers, emulsifier), E500- E599 (pH regulator, anticaking agent), E600- E699 (flavour enhancers), E700-E799 (antibiotics), E900-E999 (miscellaneous like waxes, synthetic glazes, packaging gases, sweetners, foaming agents), and E1000-E1099 (additional chemicals).

Earling: The young lamb of one to two years’ age is called earling or yearling.

Ebullioscopic constant: The boiling point elevation is expressed by Dtb = Km, where m is molality of the solution and K is ebullioscopic constant. It is also called as molal boiling point elevation constant. The unit of an ebullioscopic constant is K Kg mol-1.

Seafood has grown in consumption as it has become an important part of a diet. Simultaneously their safety is a rising concern for human health. However, seafood may contain harmful chemicals as well as biological agents that could pose health risks to consumers. Fishes are harvested from waters that are contaminated by varying amounts of industrial chemicals, heavy metals, pesticides and antibiotics. These contaminants may accumulate in fish at levels that can cause human health problems (e.g. carcinogenic and mutagenic effects).The seafood may also get contaminated with various pathogenic bacteria due to unhygienic handling practices, cross contamination of raw foods with cooked or ready-to eat foods, and lack of proper temperature control. Pathogenic bacteria can cause illness in human, either by infection or intoxication. Food borne infections are caused by swallowing live pathogens that grow within the body, usually in the intestinal tract. Intoxication is a condition caused by swallowing preformed toxins i.e. toxins produced by microorganisms in the food before it is eaten. Food can become contaminated at any point during production, distribution and preparation. Everyone along the production chain, from producer to consumer, has a role to ensure the safety of seafood.

Galactometer: It is an instrument used for recording the specific gravity of the milk (Plate 306).

Galactose: It is an aldohexose sugar obtained by hydrolysis of lactose. Galactose is a monosaccharide and has the same chemical formula as glucose, i.e., C6 H12 O6 . It is similar to glucose in its structure, differing only in the position of one hydroxyl group. Due to this difference galactose possess different biochemical properties to glucose (Plate 307).

Galactosidase: An enzyme (actase) that hydrolyzes a galactoside. β-Galactosidase, commonly known as lactase, is an enzyme responsible to hydrolyze lactose (Plate 308).

Galactoside: A glycoside that yields galactose on hydrolysis. A galactoside is a glycoside containing galactose. The H of the OH group on carbon-1 of galactose is replaced by an organic moiety (Plate 309).

Galactosyl: A glycosyl radical C6 H11 O5 that is derived from galactose.

1. INTRODUCTION

During fermentation, the fruit wines have to be monitored for different parameters to know the progress of fermentation and to control the quality of the finished products. It is essential to maintain the quality of the products, for which it is necessary to keep a complete record of wine fermentation. One such form is the fermentation control record or fermentation logbook, which is kept to monitor and record fermentation progress. It includes the name of fruit, variety, original characteristics of juice/pulp, amelioration, tank number, inoculum type and quantities, sampling time, date of start of fermentation and completion. It should also have daily record of temperature of fermentation, total soluble solid or ^oBrix reading, titrable acidity and volatile acidity, racking time/date and other comments on the fermentation. Fermentation control records should be completed and all new wines be entered in the bulk wine book inventory, the annual supplemental records can be kept in a file entitled, for example ‘Vintage season 2018’.

INTRODUCTION

The debate on climate change is going on. From the report of the Inter Governmental Panel on climate change (IPCC), a premier organization set up in 1998 by the World Meteorological Organisation and United Nations Environment Programme, it is known that the average surface temperature has increased over the 20th century by about 0. 6ºC. The number may seem insignificant but it is an unprecedented rise. In the past 150 years, the 11 hottest years were witnessed. It says that 1990s was the warmest decade and 1998 the warmest year since 1861. Worse, the Artic is warming twice as rapidly as the rest of the world and there is a distinct possibility of the Greenland Ice Sheet collapsing altogether and pushing up sea levels by several metres. It is predicted that 2035 is the year when Himalayan glaciers may totally disappear causing catastrophic disruptions. Unfortunately, India is among the countries that will suffer the most serious consequences as a result of global warming. Following is the probable effect of global warming.

INTRODUCTION

Of an estimated 142 mha of net cultivated areas in India, about 67 % is rainfed and only 45 mha is irrigated. The NCA (1976) predicted that even when the full irrigation potential of the country is exploited by 2013 AD, over 50% of arable land would continue to remain rainfed in future. It is the rainfed belt where cultivation of 91 % coarse cereals (Sorghum, Pearl millet and Finger millet), 91% pulses (Chickpea and Pigeon pea), 80% oilseeds (Groundnut, Rapeseed, Mustard and Soybean) and 65% cotton have predominated. Even the crop that formed the backbone of green revolution such as rice and wheat, still have 50% and 19% area under rainfed condition, thus emphasing the importance of rainfed agriculture in India. Inadequate resource (soil and rain water) management coupled with traditional farming practices are responsible for subsistence farming. Monocropping, traditional crops and their varieties, low and imbalance nutrients and inadequate crop establishment, in past, had been the major cause for poor development of dryland agriculture in the eastern region.

INTRODUCTION

Integrated Pest Management (IPM) has been defined as a “system that, in the context of the environment and the population dynamics of the pest species, utilizes all suitable techniques and methods in as compatible manner as possible that maintain the pest populations at levels below those causing economic injury” (Glass 1975). The Inter society Consortium for Plant Protection (ICPP) has defined integrated pest management as “the use of multiple tactics in a compatible manner to maintain pest population at levels below those causing economic injury while providing protection against hazards to humans, domestic animals, plants and the environment”. The term ’integrated’ means it is a broad interdisciplinary approach taken using scientific principles of plant protection of variety of management strategies and tactics to fuse into a single system. The terms ‘pest’ means all biotic agents which adversely affect plant production. This includes insects, mites, nematodes, weeds, bacteria, fungi, viruses, parasitic seed plants and vertebrates. The term ‘management’ indicates to keep the pest population below some level based on economic criteria. It does not mean complete eradication of entire pest population.

INTRODUCTION

One of the most important changes in the global environment which affects the existence of all living things , is the climate change. The climate change globally and locally also changes the aquatic habitat which, in turn directly and indirectly affects the environment. Anyway, the changes in climate are certain to occur and may be inevitable. The only possible way is to analyze the situation and find out the reasons for such changes and take immediate steps to minimize the impact of these climate changes. Global warming has eventually become synonymous with climate change because almost all the variables of the ecosystem are influenced directly or indirectly at different levels.

Aquatic environment is extremely diverse and influenced by the climate changes to a large extent both locally and globally. The changes in the ocean and its life are well studied at different levels with all possible details compared to the freshwater habitats. Unlike agriculture and animal husbandry, the vast majority of the fish production still comes from the natural habitat or the wild collections. Agriculture and animal husbandry usually focus on few important species but for fisheries, all the species of fishes including most of the aquatic living organisms are commercially important. The media (water) in which the aquatic organisms dwell, is much more important to all living organisms of the earth and so the influence by climate changes on water becomes very much relevant in the present situation. Freshwater habitats are limited and are much more complex to investigate in respect of climate changes due to the variability and diverse micro and macro level interactions. A holistic approach to deal with all these problems has not got much attention both globally and locally even though , it is the need of the hour to address the issues of impact of climate changes in the aquatic environment.

Conventional fertilizers often exhibit low nutrient-use efficiency, resulting in nutrient losses, soil degradation, water contamination and unnecessary production costs. Nano-fertilizers offer controlled and targeted nutrient delivery through formulations engineered at the nanoscale. Their high surface-area-to-volume ratio can improve nutrient availability, plant uptake, growth, bulb quality and storage performance while reducing conventional fertilizer requirements. This chapter explains the nature, modes of action and potential benefits of nano-fertilizers in onion production. It also considers nano-biofertilizers, smart nutrient-delivery systems and nano-sensors. Particular attention is given to manufacturing cost, nanotoxicity, effects on soil microorganisms, farmer accessibility and the need for standardized safety and regulatory frameworks.

Efficient nutrient and water management is essential for achieving high onion productivity without degrading soil and water resources. Excessive fertilizer use, poor irrigation practices, groundwater depletion, nutrient imbalance and climate variability can reduce input efficiency and environmental sustainability. This chapter presents soil testing, integrated nutrient management, site-specific nutrient application, microbial interventions, residue management, nanotechnology and digital soil mapping. It also covers drip and sprinkler irrigation, scheduling, fertigation, mulching, rainwater harvesting and other water-conservation practices. Technologies such as SPAD meters, GreenSeeker, GPS, GIS, drones, remote sensing, sensors, artificial intelligence and IoT systems facilitate real-time monitoring, need-based application and climate-smart management of agricultural resources.

1.1 Introduction Sorghum [Sorghum bicolor (L.) Moench], a cultivated diploid (2n = 20) tropical cereal C4 grass plant, is currently the fifth most important cereal crop grown in the world and the first important crop in Sudan where drought stress is a major productivity-limiting factor since most of the sorghum is grown under rain-fed conditions. It is a monocotyledon plant of tropical origin, belonging to the Poaceae family. Starch, followed by protein, fat, and fibre, makes up the majority of sorghum’s nutritional makeup, which is similar to maize in terms of its nutritional content. Compared to other cereals, including wheat and maize, the crop exhibits comparatively good water use efficiency. Sorghum is a valuable botanical model crop for other tropical grasses with complex genomes that use C4 photosynthesis due to its vast adaption to severe settings, resistance to stress conditions, diverse germplasm collections, and short (710 Mb) genome size. Sorghum, a historically important source of food and a staple crop, is becoming a crop with a variety of applications, including food, fuel, fodder, and a model for the functional genetics and genomics of tropical grasses.

1.1 Introduction In parallel with the expansion of organically cultivated land and low-input agricultural system, there is an increasing demand for crops that have promising potentials to be grown successfully in these systems. Buckwheat is generally sown in smaller areas, which may be found suitable for low-input agricultural systems. Buckwheat is a fast-growing crop with a variety of utilizations. Buckwheat, one of the pseudo and minor-cereals, has the ability to satisfy the rapidly rising population’s ever-increasing food need in the nation’s hill regions in the context of changing climatic conditions. It is also known as common buckwheat or Fagopyrum esculentum, it is not a cereal grain, but rather a seed that is related to rhubarb and sorrel. It has a unique nutty flavour that makes it an excellent ingredient in a variety of dishes. It is known in India by a variety of names, including ogal, phaphar, bresha, mittahe dyat, dro, and brotitae.

31.1 Introduction
A fundamental element of quality assurance is good manufacturing practice (GMP), which ensures that goods are consistently produced and regulated according to the quality standards suitable for their intended application and as outlined by the marketing license. The primary objective of GMP is to mitigate risks in pharmaceutical manufacture, which may be categorised into two main types: erroneous labelling and cross-contamination/mix-ups. Primarily, manufacturers must guarantee that their goods are safe, effective, and of adequate quality; hence, risk assessment has become a crucial component of WHO quality assurance guidelines.
31.2 Implementation of HACCP
31.2.1 HACCP Preamble and Definitions Preamble
1. The introductory portion of this publication delineates the concepts of the Hazard Analysis and Critical Control Point (HACCP) system as endorsed by the Codex Alimentarius Commission. This section provides broad recommendations for system application, recognising that implementation specifics may differ according to the food operation’s unique conditions.
2. The HACCP system, grounded in scientific principles and methodical methodology, identifies specific dangers and implements control measures to assure food safety. It functions as an instrument for hazard evaluation and the implementation of control systems aimed at prevention rather than predominantly on final product testing. The HACCP system is flexible, allowing for modifications in equipment design, processing methods, or technology innovations.
3. HACCP is relevant across the whole food chain, from initial production to ultimate consumption, and its use must be guided by scientific knowledge on dangers to human health. In addition to improving food safety, the use of HACCP can provide other substantial advantages. Furthermore, the use of HACCP systems can streamline regulatory inspections and enhance international trade by increasing confidence in food safety.

3.1 Introduction

The production of food grains in India is around 200 million tonnes and most of the grains are converted to primary products after primary processing such as threshing, dehulling, de-branning. Some of the grains are converted to secondary products such as flour or grits. The yields of primary and secondary products range between 65-80% indicating a wastage of 20-35%. These wastes lead to unclean surroundings and air pollution due to fine dust. Hence, proper waste management/utilization of food grain processing industries has become a societal need for a clean environment.

The term ‘waste’ has different meanings to different people. It can be retractions from the main process or less utilizable by-products or undesirable waste material depending on the commodity. All food-processing industries generate wastes and create problems for its management. The best way the food processing industry can treat its waste is to avoid producing it. Much of the waste now being produced or generated in some food processing plants can become a managed resource for producing economic credits. In fact, waste utilization is one of the world’s prominent industries and its activities cut across the normal divisions into which industries are placed. Similarly, there will be wastes from agriculture, animal and meat industries, textile, rubber etc. Even the local governmental activities that collect and dispose the household wastes become apparent in terms of the huge size of it.

Bovine milk contains an average of 3.5% protein. The concentration of protein changes significantly during lactation. The first few days of lactation exhibit the main change in protein concentration. The main changes occur in whey protein fraction.

Distribution of Protein in Milk

80% casein and 20% whey protein (β lactoglobulin- 10%, α- lactalbumin- 5%, serum albumin, and immunoglobulin- 5%).

Fractionation of Milk Proteins Fractionation of milk protein is mainly done by acidification at pH 4.6 around 30 °C.

Almost 80% of the bovine milk protein precipitates at pH4.6, and this fraction yielded by precipitation is called casein.

The remaining soluble part of the protein is referred to as whey protein/serum protein/ non- casein protein. Wide variation is observed in the casein- whey protein ratio in different types of milk(protein synthesis is independent of animal diet)

Significant Difference Between Casein and Whey Protein

1. Casein precipitates at pH 4.6 but does not precipitate whey protein at that pH. This property of milk protein is commercially exploited for the preparation of industrial casein and certain varieties of cheese.

2. Chymosin or other proteolytic enzymes produce specific changes in casein resulting in coagulation in the presence of calcium. Whey protein does not undergo this type of coagulation.

3. Casein is very stable to high temperatures. They can withstand heating up to 140 °C for 20 minutes but whey protein is relatively heat labile. They are completely denatured by heating at 90 °C for 10 min.

4. Casein is a phosphoprotein containing an average of 0.85% phosphorous while whey protein does not contain any phosphorous. The phosphate of casein is an important contributor to remarkably high heat stability and calcium- induced coagulation of rennet- altered casein.

5. Casein contains very low sulfur (0.8%) whereas whey protein is relatively rich in sulfur (1%). The principle casein contains only methionine but whey protein contains a significant amount of cystine, cysteine, and methionine. These sulfur- containing amino acids are responsible for many changes in milk on heating.

6. Casein is synthesized only in the mammary gland and no other sources in nature. Some of the whey proteins β lactoglobulin, and α- lactalbumin are synthesized in the mammary gland but bovine serum albumin and immunoglobulin are not synthesized in the mammary gland but derived from blood.

7. The whey protein is dispersed in solution and has a simple quaternary structure. Casein has a complex quaternary structure and exists in milk as large colloidal aggregates.

Post-mortem (PM) examination
The core objective of post-mortem examination is to identify and eradicate defects and contaminations and thus, confirming that only meat suitable for ingestion are allowed to be passed
Facilities for post-mortem inspection
• Normal infrastructure amenities which delivers comfortable working environment and assist in presenting the carcases and its offals for PM examination
• Every inspection place on the dressing over-head line must have lights of -- 540 lux (50 foot-candle) intensity light which does not alter the normal colours
• Adequate facility for sanitising the hands, equipments and aprons should be provided
• To sterilise the knives, cleavers and saws–a water bath operating at 82 ºC
• Head, viscera and carcase are the three major inspection parts
• On moving rails, viscera from a particular animal should move little ahead of its carcase so that any abnormality in viscera could be conveyed to the carcase examiner well in time
• For precise recognition of carcases and its correlated viscera from an animal, the lines conveying the carcases and viscera should move in synchronized way
• When a carcase is declared unfit for human consumption, all its the related parts such as head, viscera, blood and hide must be collected and disposed off
• Every inspection point must have a easily accessible overhead rail line stop button

In today’s global food industry, packaging has evolved into an essential component that extends beyond basic containment. The rapid expansion of food distribution networks and increasing consumer demand for quality, convenience, and safety have transformed packaging into a sophisticated, multi functional system. Food packaging now serves critical roles in preservation, safety, marketing, and sustainability, aligning with both global and regional standards that cater to a wide array of consumer needs. This chapter provides an overview of the importance of food packaging, discusses the current landscape in both global and Indian markets, identifies key trends and challenges, and explores packaging’s role in the modern food supply chain. Each section aims to illustrate how food packaging impacts food quality, longevity, and overall consumer satisfaction, highlighting the industry’s ongoing innovations and adaptations to regulatory and environmental concerns. 1.1 Definition and Significance of Food Packaging Definit

Packaging is not only an integral part of product presentation but also plays a vital role in preserving food quality and extending its shelf life. In a world where food must travel vast distances from producers to consumers, often across varying climates and storage conditions, effective packaging is essential. It serves multiple functions, from protecting food against physical, chemical, and biological hazards to providing a medium for branding, regulatory compliance, and consumer convenience. This chapter explores the fundamental need for packaging in the food industry, emphasizing how packaging contributes to the safety, longevity, and accessibility of food products. By examining the protection, preservation, distribution, and sustainability aspects of packaging, this chapter highlights its significance in modern food production and distribution systems. 2.1. Protection, Preservation

Sugar also acts as preservative at high concentration 70% or more in food products (fruit and vegetable products). High concentration of sugar in food materials create unfavourable conditions for microbial survival and prevent spoilage. Based on this principle of preservation, sugar based products are prepared from fruits and vegetables so that they can be preserved for long time. This method of preservation with high sugar concentration is principally based on the reduction in moisture content to arrest or stop microbial spoilage. Preparation of sugar based products is one of the most important aspects of home scale as well as industrial level processing of fruits and vegetables. Sugar based value added products include.