eChapters

Introduction

Agriculture and allied sectors have always been the backbone of the Indian economy and despite concerted industrialization in the last six decades agriculture still occupies a place of pride. The significance of agriculture in the national economy arises from the role it plays in India’s national income, employment generation and export earnings; this can be seen from the provisional estimate on contribution of various sectors to the GDP in the f irst quarter of 2020-21, particularly during COVID-19 pandemic, positive percentage change (+3.4) over previous year when all other sectors have negative change.

Introduction

The impacts on the various facets of life – agriculture and food processing – need no longer be addressed in a way that is well established. Nearly every aspect of the planet has shown its effect at different rates, both positively and negatively. As a subtropical region, India is also witnessing different variations in weather and an increase in temperature that affect farming. Only in recent years has the potential to reduce transpiration from plants by the use of chemicals been further explored. These antitranspirants can either control perspiration by filming the leaf surface or by manipulating the aperture of the stomach. Antitranspirants are the materials or chemicals that reduce the water loss from plant leaves by reducing stomata size and number. During transpiration, almost 99 per cent of the water consumed by the plant is lost.

K ration: It is a lightweight packaged ration of emergency foods developed for the U.S. armed forces in World War II (Plate 215).

Kairomone: A chemical substance emitted by one species and especially an insect / plant that possess an adaptive benefit (stimulus for oviposition) to another species.

Kaiser rolls: A round crusty roll often used for sandwiches (Plate 216).

Kalamata/calamata: It is brine cured black olive grown in Greece.

Kallikrein: A hypotensive protease that liberates kinins from blood plasma proteins and is used therapeutically for vasodilation.

Kanji: Clean, black coloured, crisp and sound product of characteristic flavor prepared by full fermentation (chiefly lactic acid fermentation) of black carrot with 2.5% salt, 1% powder mustard and some amount of water.

Kaposi’s sarcoma: It is a neoplastic disease that occurs in individuals coinfected with HIV and a specific herpes virus (species Human herpesvirus 8 of the genus Rhadinovirus), that affects skin and mucous membranes, and is marked by pink to reddish-brown or bluish plaques, macules, papules, or nodules.

Z -distribution: It is a probability density function and a normal distribution that has a mean equal to zero and a standard deviation equal to one and that is used in testing hypotheses about means or proportions of samples drawn from populations whose population standard deviations are known.

Zeatin: Zeatin is a cytokinin C10 H13 N5 O first isolated from the endosperm of Indian corn.

Zeaxanthin: Zeaxanthin is an isomer of lutein occurring in fruits and vegetables (spinach and corn) (Plate 343, 344 and 345).

Zein: Zein is a protein from Indian corn that lacks lysine and tryptophan and is used in making textile fibers, plastics, printing inks, edible coatings, and adhesives and sizes.

Jaggery: Raw brown / unrefined brown sugar in lump made from palm sap (Plate 365).

Jam: A preserved product prepared on boiling pectin contained in fruit pulp with required amount of sugar, water and acid to a reasonably thick consistency, firm enough to hold the fruit tissues in position (Plate 366).

Jam pack: The packing of the commodity tightly or in excess is called Jam pack.

Jamaica rum: Heavy bodied rum made by slow fermentation and marked by a pungent bouquet.

Jamboline: A type of glucose found in the jamun fruit help in cure of the diabetes in the patients.

Jelly: A product prepared by boiling clear extract of fruits with sugar. It should be transparent, well set, and tender enough to quiver but not flower and when cut; it should retain its shape and show a clean cut surface (Plate 367).

Q10 value: The number of times a reaction rate change with a 10oC change in temperature is called Q10 value. If reaction rate doubles with 10oC change in temperature, Q10 = 2. It is also called temperature quotient.

Q-enzyme: It is a branching enzyme responsible for formation of 1-6 bonds in amylopectin.

QHV process: It stands for Quality Has Value Process.

QO2 : It is a unit for measurement of respiration. Or It is the oxygen uptake in microlitres per milligram on dry weight per hour.

Quailing: In this practice the oranges are kept in the baskets in which they are harvested to allow the fruit to loose little moisture. It is done for a couple of hours before transport to packhouse. This practice would allow the fruit to lose a little moisture which is called quailing. This operation is done for oranges to prevent Oleocellosis.

Qualitative measurement: It is a subjective / objective measurement of the quality of the product for presence of certain compound. It gives the idea of the presence or absence of the particular compound. It deals with the nature of the substance and not its amount or quantity.

Zeatin: Zeatin is a cytokinin C10 H13 N5 O first isolated from the endosperm of Indian corn.

Zeaxanthin: Zeaxanthin is an isomer of lutein occurring in fruits and vegetables (spinach and corn) (Plate 682, 683 and 684).

Zein: Zein is a protein from Indian corn that lacks lysine and tryptophan and is used in making textile fibers, plastics, printing inks, edible coatings, adhesives and sizes.

Zeolite: It is clay embedded in the plastic film to adsorb ethylene. It is used in Japan. Zeolite is anhydrous silicates that is analogous in composition to the feldspars and used in water softening, adsorbents and catalysts. Or Zeolite is one of various hydrous silicates that are analogous in composition to the feldspars, occur as secondary minerals in cavities of lavas, and can act as ion-exchangers. These are used especially in water softening and as adsorbents and catalysts (Plate 685).

Zero 2: It is Australian oxygen scavenging plastic packaging materials.

Previous Year Questions

1. CS 2015: Discuss the impact of rapid increase in population on food and agriculture (12.5 marks)

What is Food security?

The Food and Agricultural Organization (FAO) – “when all people at all times have physical and economic access to sufficient, safe and nutritious food to meet their dietary needs and food preferences for an active and healthy life”.

It has Following Dimensions

• Availability: It means food production within the country, food imports and the stock stored in government granaries.

Previous Year Questions

1. Discuss the reasons for food grain surplus (7.5 marks, CSE 2019)

2. What are the reasons for good grain surplus in India? Write the steps taken by the government to save the food grains. (12.5M, CSE 2015)

Reason for Grain Surplus

Green Revolution

• Introduction of high yielding varieties of Rice and Wheat

• Green Revolution was made possible through the use of

Previous Year Questions

1. No questions were asked in past 10 years

Availability of Foodgrains

• Net availability of foodgrains = Gross Production (-) seed, feed & wastage, (-) exports imports (+/-) change in stocks.

Concept: Seed blending is the process of merging two or more types of the same species, for as Kentucky bluegrass cultivars Merion, Baron, and Park. Contrarily, seed mixing refers to the blending of two or more species, however every species may have more than one variation represented, such as Jamestown and Cascade chewing fescue combined with Merion and Fylking Kentucky bluegrass. Seed is typically distributed in blends, primarily Kentucky bluegrass blends, for sod growing purposes. For home lawns, parks, and other utility areas where upkeep levels would not be adequate to maintain pure Kentucky bluegrass turf, mixes of different grasses are typically employed. Naturally, when it comes to pure seed quality, no blend of grass seeds is superior to the individual ingredients. Every time a new blend needs to be made; extreme caution must be taken to ensure that the mixing equipment can be completely cleaned to prevent any contamination from unwanted species—bent grasses are perhaps the most challenging to deal with.

India is known as the food basket of the world. It is the second largest producer of fruit till now after China, but its contribution to the Global market of fruit processing is just 1per cent. This is due to the fact that there is deficiency of skilled manpower, poor cold storage facilities, inefficient post-harvest management and minimal technological interventions.
Deficiency of the skilled manpower: In-spite of market size of US dollar 181 billion, expenditure on food and food products being 21per cent of India’s GDP and more than 31per cent share of wallet by consumers, there is resultant apprehension about the emergency emerging skill shortages due to mismatch between the demand for specific skills and available supply. Shortage of skilled, Semi- skilled and unskilled workers has emerged as a critical factor impacting the competitiveness of Indian food industry. Efficient man-power is one such critical element to improve to foster the growth. As the food industry advances and adopts various levels of automation the demand of skilled manpower will increase phenomenally. Hence if, the Indian food industry must achieve projected growth target set and become globally competitive, the need to develop and train the human resource efficiently would be essential.

1. Peeling: It is one of the integral parts of a food processing, and most agri-cultural crops need to be peeled to remove at the initial stage of food processing Peeling removes inedible portion (peel, seeds, and stalk) of fruits and vegetables. However, the susceptibility to spoilage increases due to acceleration of physiological process and the exposure of the tissues to microorganisms. The shelf-life and quality of fresh-cu produces could be compromised with the peeling.
The goals of optimum peeling operation are i. Minimizing product losses, ii. Types of products e.g., potato products, iii. Minimizing heat ring formation e.g., apple, potato, iv. Minimizing energy and chemical usage, v. Minimizing the environmental pollution.
Peeling operation can be grouped under following categories: Manual peeling (knife or blade), Mechanical peeling (abrasive devices, devices with drums, rollers, knives or blades and milling cutters), Chemical peeling, Enzymatic peeling, and Thermal peeling (Flame or dry heat peeling, steam or wet heat peeling, thermal blast peeling, and vapour explosion or vacuum peeling.

Introduction
Sterilization of culture media, containers, and instruments is crucial in bacteriological work to ensure the isolation and maintenance of pure cultures. Sterilization and sanitization are essential processes in a microbiology lab to prevent contamination and ensure accurate results. Sterilization refers to the complete elimination of all microorganisms, including bacteria, fungi, viruses, and spores, using methods like autoclaving, dry heat, filtration, and chemical agents. Sanitization, on the other hand, reduces microbial load to a safe level through cleaning and disinfection using alcohols, detergents, and UV light. These practices maintain aseptic conditions, protect lab personnel, and preserve sample integrity. Proper sterilization and sanitization are fundamental to microbiological research, clinical diagnostics, and industrial applications, ensuring reliable and reproducible experimental outcomes.
Preparations for Sterilization Before sterilization, cleaned and dried test tubes and flasks should be carefully plugged with clean, non-absorbent cotton. Pipettes should also be plugged at
the mouth end, and the plugs should remain in place during use to minimize oral contamination. Cotton plugs provide sufficient ventilation for bacterial growth while preventing external contamination.

Introduction
This method is used to determine the ‘total bacterial count’ (living and dead  organisms) by direct microscopic examination in samples of broth culture, cell suspension and milk. Simple and Gram’s staining techniques are used to stain the cells. This method is simple and a rapid. A known volume (0.01 ml) of the sample is spread over a known area (1cm2) on a glass slide. The sample is allowed to dry; then stained and examined microscopically. The average number of cells per field is determined and is then calculated by applying microscopic factor.
Materials
1. Microscopic slide with one sq. cm. area marked
2. Breed’s pipette (0.01 ml)
3. Methylene blue or Newman’s stain
4. Culture of E.coli or Bacillus subtilis
Procedure
1. Measure the diameter of microscopic field with a stage micrometer using oil immersion objective and 10X eye piece.
2. Area of field πr2.
Determination of microscopic factor (MF)

Introduction
Some species of rod shaped bacteria e.g. E.coli, Ps. fluorescence, Bacillus subtilis are known to be motile. Bacterial motility is generally associated with the presence of hair-like appendages called “Flagella”. There are several ways for determining the motility of a culture such as the wet mount method, hanging drop method and a culture method (on semisolid medium). Bacterial cells in suspension also exhibit a vibratory or oscillatory movement without changing their relative position. This is termed ’Brownian Movement’ and it should not be confused for true motility of bacteria. In motility the cells change their relative position and move across the microscopic field in different directions.
1. The Wet Mount Technique
This is the simplest and quickest way to determine the motility of bacteria.
Materials
1. Clean glass slide
2. Broth culture of bacteria (E.coli, Ps.fluroscenes)
3. Cover glass
Procedure
1. Place a drop of organisms on clean glass slide and cover with a cover glass.
2. Examine the slide with phase contrast microscope or bright field microscope with reduced light under oil-immersion.

Introduction
The characteristics of bacteria used in the study and identification of bacteria depend upon the behavior of populations or cultures rather than of individual organisms. Nutrient materials provided in a form, suitable for growth, are known as culture media. A Growth Media or culture medium is a liquid or gel designed to support the growth of microorganisms or cells.
I. Types of Culture Media
Different types of culture media may be used for cultivation of microorganisms such as liquid, solid and semi-solid.
i) Liquid Culture Media: Includes nutrient broth, Glucose broth, litmus milk etc. these media are used for the preparation of large number of microorganisms, fermentation studies and various other tests.
ii) Solid Media: A little agar, gelatin or silica gel; is added to a liquid medium to impart a degree of firmness to it. Nutrient agar, Blood agar, etc. are examples of solid media that are used for developing surface colony growth of bacteria and mold.
iii) Agar Slant Media: Test tubes or small bottles containing about 5ml. of solid medium, e.g. nutrient agar, dissolved and allowed to cool in a sloping position.
iv) Stab Media: Tubes or bottles containing agar medium are allowed to solidify in the upright position.
v) Semi solid Media: These are more jelly like due to lower percentage of the solidifiers. These media are particularly used for determining motility of bacteria.

Introduction
In order to study the cultural, morphological and physiological characteristics of an individual species, a pure culture of the microorganisms is required. Several different methods of separating the microorganisms from a mixed culture are available. The two most frequently used methods involve making a pour plate and/or streak plate. Isolated colonies are obtained from individual organisms after incubation.
Streak Plate Method
Plating is generally applied to the inoculation of a medium in petridish. Streak plate method is best for the separation of organisms from a mixed culture. In this method, agar medium is allowed to solidify as a thin layer in a petri dish and culture is streaked on the surface of agar medium and allowed to incubate to get isolated colonies.
Materials
1. Sterile petri plate
2. Wire loop
3. Nutrient agar medium
4. Bunsen burner
5. Mixed culture of E.coli and Micrococcus leutus

Introduction
A) Cultivation of Fungi
A fungus is any member of the group of eukaryotic organisms that includes microorganisms such as yeasts and molds, as well as the more familiar mushrooms. These organisms are classified as a kingdom, Fungi, which is separate from the other eukaryotic life kingdoms of plants and animals. A characteristic that places fungi in a different kingdom from plants, bacteria, and some protests is chitin in their cell walls. Similar to animals, fungi are heterotrophy; they acquire their food by absorbing dissolved molecules, typically by secreting digestive enzymes into their environment. Fungi do not photosynthesize. Growth is their means of mobility, except for spores (a few of which are flagellated), which may travel through the air or water. Fungi are the principal decomposers in ecological systems. These and other differences place fungi in a single group of related organisms, named the Eumycota (true fungi or Eumycetes), which share a common ancestor (form a monophyleticgroup), an interpretation that is also strongly supported by molecular phylogenetics. This fungal group is distinct from the structurally similar myxomycetes (slime molds) and oomycetes (water molds). The discipline of biology devoted to the study of fungi is known as mycology. In the past, mycology was regarded as a branch of botany, although now known fungi are genetically more closely related to animals than to plants.

The estimation of moisture in foods is one of the most important and most widely used measurements in the processing and testing of food products. It is used to determine the nutritive value of food, to express results of analytical determinations on a uniform basis, and to meet compositional standards or food laws. The level of moisture in different fruits and vegetables varies widely. Most fresh fruits contain more than 85-90% moisture in edible portions. Broad range of moisture content in common fruit, vegetables and their products as general guideline are given in Table 3.1.
Estimation of Moisture content in food products: Moisture content in foods can be estimated by following methods.
i. By Drying in an oven
ii. By distillation with an immiscible solvent
iii. By Chemical and physical methods (Infra-red heating method)

Most of the fruit, vegetables, and their products contain acid or a mixture of acids. These acids are mainly responsible for the tartness or sour taste. The level of acidity is estimated to measure the degree of tartness/sourness in the product.
Principle
Acidity in the sample is measured by titrating a known volume of sample against a standard alkali solution of known concentration using phenolphthalein as an indicator. The appearance of a light pink color indicates the endpoint of titration. However, for highly colored products like tomato sauce/ketchup, jamun juice, Rhododendron juice, mixed fruit jam, etc., accurate determination of endpoint may be difficult by using an indicator. Therefore, for such samples, acidity is measured by using electrometric methods i.e. titration to a predetermined pH value, or the sample is further diluted with distilled water to mask the interfering color. The level of titratable acidity is expressed in terms of the predominant acid. Different fruits, vegetables, and their products have different predominant acids. A list of some products having predominant acid is shown as under:

pH is important as a measure of active acidity which influences the flavour and palatability of the product and affects the processing requirements. This is an indicator of the acidity or alkalinity of the solution. It is also taken as the measure of the sourness or tartness of the given sample. The pH of a solution varies from 0 to 14. Solutions having a value of pH ranging from 0 to 7 on the pH scale are termed as acidic and the value of pH ranging from 7 to 14 on the pH scale are known as basic solutions. While, solutions with a pH value equal to 7 on the pH scale are known as neutral solutions. Samples with a pH value equal to 0 are known to be strongly acidic. Further, the acidity decreases as the value of pH increases from 0 to 7 whereas, solutions with the value of pH equal to 14 are termed as strongly basic solutions.
Most fruits have a pH value ranging between 3-4, with citrus fruits exhibiting a pH of up to 2.0. Vegetables may exhibit a pH of up to 6.0, as such they are classified as non-acid or low-acid foods. Based on pH value, most fruits, vegetables, and their products are classified into four arbitrary groups such as low acid (5.3 and higher); medium acid (5.3-4.5), acidic (4.5-3.7), and high acid (3.7 and lower). pH value of some fruits, vegetables, and their products is given as under:

Fruit, vegetables and their products are important sources of ascorbic acid. Aonla, guava and citrus fruits are good sources of Vitamin C (Ascorbic acid).Ascorbic acid is sensitive to heat, light and oxygen but is stable in acidic
 media. The methods for estimation of Ascorbic acid are based on the reduction of 2,6 -dichlorophenol - indophenol dye by ascorbic acid and those based on the reaction of dehydroascorbic acid with 2,4- dinitrophenylhydrazine. However,the 2,6 -dichlorophenol - indophenol dye reduction method is most commonly used in the estimation of ascorbic acid in fresh fruit and vegetables and their processed products.
2,6 dichlorophenol - indophenol visual titration method
The dye, which is blue in an alkaline solution and red in an acid solution, isreduced by ascorbic acid to a colorless form. The reduction is quantitative and specific for ascorbic acid in solutions in the pH range of 1-3.5.
Reagents
i. 3% Metaphosphoric acid (HPO3) solution:Dissolve 3g sticks/ pelletsofMetaphosphoric acidin a volumetric flask and make volume to 1oo ml with glassdistilled water.

Sodium benzoate is added to many fruit products to act as a preservative for the extension of the shelf life. Food Safety and Standards Regulations have specified the maximum level of sodium benzoate (Benzoic acid) in different products like sauce, ketchup, pickles, squash, etc. Therefore, the estimation of sodium benzoate (benzoic acid) in such products is considered a routine quality control procedure.
Principle
Benzoic acid which is sparingly soluble in water is converted into watersoluble sodium benzoate by the addition of NaOH in a sample containing sodium chloride solution. When the Sodium Benzoate solution is acidified with excess HCl, water-in-soluble benzoic acid is formed which is extracted with chloroform. The chloroform is removed by evaporation and the residue containing benzoic acid is dissolved in alcohol and then titrated with standard NaOH.

Sulphur dioxide is used as a preservative in many fruit and vegetable products. It can be added either in the form of potassium metabisulphite or by exposingthe product to sulphur fumigation by burning sulphur powder. Food safety and standards regulations have specified the maximum limit of sulphur dioxide in the finished products. Products having sulphur dioxide content exceeding the limit are considered not conforming to Indian Food Laws. Therefore, the estimation of sulphur dioxide in food products is considered an important attribute for quality evaluation.
Principle
Sulphur dioxide added to the food products may exist as undissociated sulphurous acid, as free bisulphite ions, as free sulphite ions and/or as combined SO2 in the form of hydroxy sulphonates. Sulphur dioxide is measured as free or total SO2.
Free SO2 is measured by direct titration with iodine. In the estimation of total SO2, the combined SO2 is liberated by treatment with excess alkali at room temperature, followed by subsequent acidification to prevent recombination and titration with iodine. The method used is known as the Modified Ripper Titration Method.

The term canning refers to a process that involves heating foodstuff in hermetically sealed containers for a specific time at a specific temperature to eliminate microbial pathogens that endanger public health; and microorganisms and enzymes that deteriorate food during storage.
Principle of canning: Destruction of micro-organisms causing spoilage, within the sealed containers using heat.
Canning Process
Preparation of food commodities for canning consists of selection of commodities, washing, sorting, grading, peeling, halving, blanching, filling into cans, filling hot syrup or brine, exhausting, double seaming, Sterilization/ processing, cooling, storage, etc.
Raw material selection
Fruits should be ripe but firm, evenly matured, and free from blemishes, insect damage, and malformation. Apple, pear, peach, and banana harvested at the mature stage are preferred for canning.

Squash is a type of fruit beverage containing at least 25% fruit juice/pulp, not less than 40% total soluble solids (TSS), about 1-1.5% acid and not exceeding 350ppm sulphur dioxide or 600ppm sodium benzoate. Squash is diluted by adding cold/chilled water before serving (1:3).
Mango, orange, lemon, lime, litchi, guava, pineapple, jamun, plum, apricot, rhododendron petals etc., are used for making squash. Potassium metabisulphite (KMS) is generally used as a preservative, whereas sodium benzoate is used as a preservative in squash made from coloured fruits like plum, jamun, phalsa and rhododendron petals.
Recipe: A generalized recipe for the preparation of squashes from different
fruits as a general guideline is as under:

Ready -to -Serve (RTS) drink is a type of fruit beverage that contains at least 10% fruit juice/pulp and 10o Brix total soluble solids with acidity ranging between 0.3-0.5%. The product is not diluted before serving like squash; hence it is called a ready-to-serve beverage. The product can be preserved by using 70 ppm SO2  or 120 ppm benzoic acid. Mango, orange, guava, lemon, lime, litchi, kiwi fruit, apricot, pineapple, etc., fruits are used for making RTS beverages. For lime & lemon drinks minimum level of juice content is 5% as per Indian Food Laws.
Recipe: As a general guideline, the following recipe is used for the preparation of ready-to-serve drinks:
Procedure
i. Select fully mature and ripe fruit like mango, guava, apricot, kiwi, etc., and wash thoroughly.
ii. Some fruits like mango, kiwi, pineapple, and litchi are peeled before heating. Apricots, guava, plums etc are not peeled. Place fruit after peeling in a pan/pressure cooker and boil till softening

Fruit nectar is a type of fruit beverage that contains not less than 20% fruit juice or pulp, not less than 15o B total soluble solids and acidity ranging between
0.3-0.5 % but not exceeding 1.5%/. For orange and pineapple nectar, the fruit juice shall not be less than 40%. The product is preserved by heat processing/ thermal processing, as such no chemical preservative is permitted in nectars. Unlike squashes, fruit nectar is served chilled as such without any dilution.
Mango, guava, pineapple, papaya, jamun etc., are the most suitable fruits for making nectar.
Recipe: As a general guideline, the following recipe is used for the preparation of fruit nectar:
Procedure
i. Select fully mature and ripe fruit and extract pulp as discussed under fruit pulp making but do not add any chemical preservative.

Jam is prepared by boiling the fruit pulp with a sufficient quantity of sugar to a thick consistency, firm enough to hold fruit tissues in position. For the preparation of jam, not less than 45 parts of fruits are used for every 55 parts of sugar. The jam prepared by using two or more fruit pulps is called mixed fruit jam. Apple jam, apricot jam, mango jam, guava jam, pineapple jam, and mixed fruit jam prepared by using the pulp of two or more fruits are quite common. According to Food Safety & Standards Regulations,2011 the minimum TSS in the Jam shall not be less than 65%(w/w). Earlier the minimum limit was 68% (w/w)
Raw material, ingredients and utensils required
1. Fruits like mangoes, guava, apples, apricots, plum, peaches and kiwi etc singly or in combination
2. Stainless steel knives, de-corers, ladle, utensils for cooking and mixing, glass bottles (Jars), LPG or Diesel Bhatti, bucket/tub for washing, Stainless steel sieve, Steam Jacketted Kettle, Boiler (for the commercial unit) etc. 

Jelly is prepared by boiling the fruit with or without the addition of water, straining the extract, and mixing the clear extract with sugar followed by cooking the mixture to a stage at which it will set to a clear gel. The jelly should be transparent, well set, but not too stiff, and have an original flavour of the fruit. It should be attractive in colour and should keep its shape when removed from the mould. As per FSSAI specification, the quantity of fruit and soluble solids in the final product (jelly and marmalade) shall not be less than 45 and 65 per cent (w/w) respectively. Jelly is made from fruit extract while jam is made from fruit pulp, therefore, jelly in contrast to jam is considered to be transparent and clear in appearance. Guava jelly is the most common commercial product.
Jellies: In the preparation of jellies, pectin is the most essential constituent which help in making the gel. Since, pectin is present in the cell walls of fruits as such fruit peel, whole or fruit slices along with a small quantity of water are gently boiled to extract the maximum proportion of pectin solution in the water extract. This water extract is used for the preparation of jelly.

Marmalade is a fruit jelly in which the slices of peel are suspended. The marmalades are prepared generally from citrus fruits like orange and lemon. The pectin and acid contents of the marmalades should be kept slightly higher  than that for jellies. Citrus marmalades are of two types: i) Sweet marmalade and ii) Bitter marmalade.
Procedure
Preparation of fruit extract: After washing the fruit, remove the outer yellow flavedo portion of the peel of citrus fruits thinly which contains colouring matter and volatile oils, whereas the inner white albedo portion contains pectin. The thin yellow peel is cut into fine shreds with a knife, or on a shredding machine, and the shreds are boiled and drained to remove the bitterness. The sliced or crushed fruit is boiled gently by simmering with 2 or 3 times its weight of water to extract the pectin. While it is being boiled, a teaspoonful of the clear extract is taken from the pan and tested with alcohol for its pectin content. The process usually takes 30 to 45 minutes.

Fruit chutney is a product made in the same way as jam except that spices, salt, and acid (vinegar) in addition are added. The total soluble solids in chutney are] also less than that of jam. The product shall be of good quality with a palatable and appetizing taste. As per Food Safety and Standards Regulations, chutney\ shall contain a minimum of 40% fruit (w/w) in the final product with total soluble solids not less than 50%. The acidity in the final product shall not be more than 2% with ash content not exceeding 5%. However, for vegetablebased chutney as well as hot & sour (spicy) chutney, the TSS shall not be less than 25%.
Recipe: The generalized recipe for the preparation of chutney from different fruits is as under:

Fruit syrup is a beverage that contains at least 25% fruit juice/pulp, 65% total  soluble solids and acidity ranging between 1.2 -1.5%. It is preserved by using
350 ppm SO2 or 600 ppm benzoic acid. Fruit syrup is diluted before serving. Syrup can be made from the juice/pulp of jamun, ginger, lemon, phalsa, rose extract, bael, pomegranate, and brahmi (Bacopa monnieri) leaves/root extract, etc. Besides, a syrup/sharbat containing a minimum of 10 per cent of dry fruits is also regarded as fruit syrup.
Recipe: The generalized recipe for the preparation of syrups from different fruits is as under:

Preserve (Murabba) is made by cooking the fruit either whole or in slices/ pieces in sugar syrup of heavy concentration (65-70oBrix). Usually for 1 kg fruit around 1.75 kg sugar is used and the cooking is continued till the TSS reaches 68oB. Fruits like petha (ash gourd), aonla, bael, apple, pear, karonda, pineapple and papaya etc., are used for making preserve/murabba.
Candies are also prepared similarly but the TSS is maintained up to 75-80%. For candy preparation, the fruit pieces are dipped initially in 55-60% sugar solution and the TSS of the syrup is increased by 5% everyday up to 4-5 days and then the fruit slices are drained free of syrup and dried in driers. Fruits like aonla, karonda, cherry, apple, ginger peels of orange, lemon, and grapefruit etc., and petha (ash gourd), are used for candy preparation.
Selection and preparation of fruits: Wash the fruits in water to remove dirt and residues. Peel, core and cut the fruits into pieces. Pricking should be done with stainless steel forks. In case of petha (ash gourd), after pricking place them in lime water

Tomato, apple, plum, mushroom, etc., are used successfully for the preparation of sauces. Sauces are of two kinds 1) thin sauces consisting of vinegar extracts of flavoring material like herbs or spices and 2) thick sauces which are highly viscous.
Sauces are prepared by maceration of spices, herbs, fruits, and vegetables in cold vinegar or by boiling. Thickening agents like pectin, carboxymethylcellulose,n etc., are also added to sauces to prevent the sedimentation of solid particles. The sauce is generally cooked to such a consistency that it can be freely poured without fruit tissues.
Procedure
Tomato fruits are washed, cut into pieces, and heated/boiled for about 10 minutes in their own juice in SS pan to soften the tissue. The heated fruit mass is passed through a pulper to separate skin and seeds. Half of the sugar and spices are placed in a muslin cloth bag which is then immersed in the pulp during cooking. Cooking is continued till the pulp is reduced to half of the original volume.

Drying and dehydration are interrelated terms. Drying generally refers to the method of removal of moisture from the food under natural conditions such as sunlight and wind for example open sun drying, shade drying etc. Whereas, dehydration refers to a process of removal of moisture by application of artificial heat under controlled conditions of temperature and airflow. In this case single layer of fruit and vegetables, either whole or sliced after primary pretreatments is spread on trays which are placed inside the dehydrator or in the open sun for drying. In the dehydrator, the initial temperature is generally kept at 43oC which is then gradually increased to 66-71oC for fruits and 60- 66oC for vegetables. Dried grapes (raisins and monucca), apricots, dates, apple rings/cubes, Morchella (Guchhi), bael, aonla, fig, green peas, cauliflower, cabbage, onion, garlic etc are commercial products prepared by using drying.
Procedure for drying: Drying generally involves three stages: pre-drying treatments or pre-treatments, drying of commodity and post-drying operations such as handling, packaging and storage. The flow sheet for drying of fruit and vegetables is shown in Figure 1 and details of pretreatments for drying fruits and vegetables are shown in Table 1&2 respectively.

3.1 Malted Milk
Malted milk, originating from the ideas of British pharmacist James Horlick in the 19th century, was initially marketed under the name “Diastoid” before being trademarked as “malted milk” in 1887. Although initially targeted
for infants and invalids, its appeal expanded due to its nutritional value, convenience, digestibility, and palatability. Recognized globally for its lightweight, non-perishable nature, and high-calorie content, malted milk is
created by evaporating a mixture of malted barley, wheat flour, and whole milk until it forms a powder.
There aremainly two types of malt powder: diastatic and non-diastatic. Diastatic malt containing enzymes breaking down starch into sugar, aiding in dough rise and crust formation, particularly in bread making. Non-diastatic
malt lacks active enzymes and is primarily utilized for flavor enhancement, commonly in beverages. It may also include sugar, coloring agents, and other additives to improve taste and appearance.
3.2 Malting
Malting is a crucial process employed in treating cereal grains, such as barley, by inducing germination through soaking in water followed by halting the process through drying or heating with hot air. This technique encompasses two main stages: sprouting and kiln-drying. The term “malt” encompasses several products of this process:
1. Malted grains: These are grains, like barley, that have undergone the malting process.
2. Malt sugars: These are sugars, predominantly maltose-rich, derived from malted grains, often utilized in baking, such as baker’s malt.
3. Malted milk products: These include beverages like malted milkshakes, made using malted milk.

Objective: Development of Potato chips
Potato is a perishable commodity and cannot be preserved longer in fresh form. Although for some time potatoes can be preserved by low temperature storage but this low temperature storage results in many undesirable biochemical changes in the quality of the potatoes. Another alternative for the preservation of potatoes is to conversion in the shelf stable value-added processed products. Further, value-addition and processing of potato will also ensure the availability of wholesome, safe, nutritious, and acceptable food to consumers throughout the year along with simultaneous reduction in post-harvest losses and profit to the farmers for their produce. Potatoes are processed into a great variety of products, including cooked potatoes, par-fried potato strips, French fries, potato chips, potato starch, potato granules, potato flakes and dehydrated diced potatoes and others. Globally, only two potato-based snack foods i.e., chips/ wafers and French-fried potato are the main value-added products of potato, accounting for more than 42% of the potato based processed products. Such type of fried products is loved for convenience and their premium taste, flavour, and texture. With the technological advancements, now potato processing is highly industrialized and market driven. Like other processed products, the finished product quality of potato based value-added products severely depends upon the quality of raw potatoes used. Therefore, the major challenge in potato processing is to fulfil the tuber quality requirements specifically, tuber morphology, reducing sugar (=0.1%) and dry matter content (=20%). Alternatively, we can infer that all type of potato is not suitable for processing. The crispy texture of potato chips is one of the most important quality indicators of the finished product, apart from colour, odour and flavour. Potato chips texture is often described in terms of crispness, hardness and crunchiness. This crispy/crunchy character is an important sensory characteristic on which consumers base their appreciation.

Objective: Production of Chocolate.
The major ingredient of chocolate is cocoa mass, which is mixed with sugar, and in case of milk chocolate, also with milk powder. The conching process then follows, which is important for the development of full chocolate flavour. Melted cocoa butter is added, the chocolate mass becomes liquid and is cooled, tempered and poured into moulds to form chocolate products.
Mixing of ingredients
Sugar, cocoa mass and milk powder are intensively mixed forming a dry powder. This powder is pre-ground in various types of mills and then finely ground in a 5-roll refiner. The size of particles in chocolate is between 15- 70 mm (average 25 mm). Small operators use vertical ball mills. Optimum flow properties are required for further processing. The yield value required differs according to the potential use (e.g. hollow moulding or enrobing). The particle size affects both the yield value and the plastic viscosity. In order to reduce recipe costs, the most expensive major constituent (i.e. fat) should be used in the smallest possible proportion which will give correct flow characteristics.

Rice milling machines are crucial in the rice production industry, as they are used to remove the husk and bran layers from paddy, resulting in polished white rice. Various types of rice milling machines, such as hullers, whitening machines, polishers, and graders, are available, each designed for a specific function in the milling process. When selecting a rice milling machine, it's essential to consider factors such as capacity, efficiency, power consumption, and maintenance requirements. Additionally, the machine’s size should be aligned with the scale of rice production operations. By investing in the right machinery, producers can enhance overall efficiency and product quality, while reducing manual labor and processing time.
OVERVIEW OF RICE MILL MACHINERY
Rice mills are food-processing facilities where raw paddy is converted into rice. These mills use modern machinery to process the paddy harvested from fields, transforming it into the final product, rice. Various types of rice mill machines are utilized throughout the milling process to ensure efficient and effective production.
Applications of Rice Mill Machinery
Milling is one of the key steps in the production of rice. It is generally performed post the production of rice. The paddy produced industrially cannot be consumed in its natural forms. This is why paddy is processed post its production, by the process of milling. It removed in order to make it fit for human consumption.
Variants of Rice Mills
There are many types of rice mills, each tailored to specific processing needs and production capacities. Below is a list of machines used in rice mills:
• Single-Pass Rice Mills: These machines are designed for simpler rice milling operations. They typically perform the essential tasks of husking and whitening in a single pass.
• Multi-Pass Rice Mills: Ideal for large-scale operations, multi-pass mills carry out multiple milling stages. These stages include cleaning, husking,

2.1 Introduction
Typically, milk is obtained from domesticated animals (water buffalo, sheep, or goats) under farm-level circumstances. In smaller amounts, it can be utilized directly after boiling; but, in larger quantities, processing and storage are crucial. Farms provide their milk to milk vendors, who collect it in cans and deliver it to chilling centers or dairy processing plants. After milking, the milk is quickly chilled to 4°C, or it should be pasteurized and packaged within two hours. Before being marketed, milk must be pasteurized, with the exception of products that initially require raw milk or those that require direct application of heat, such as desiccation or another heating process. The market for novel goods and procedures is steadily growing. The main causes include rising disposable incomes, shifting consumer attitudes and concerns about safety, hygiene, and nutrition, and the entry of foreign companies.

2.2 Dairy plant requirements
The plant should be situated in an area free from waterlogging, well- protected, easily accessible by car, and equipped with a plentiful supply of drinkable water, a facility for disposing of waste, and energy.

2.2.1 Infrastructure requirements
For the receiving of milk, chilling, storing, separating, pasteurizing, homogenizing, packaging, and product manufacturing, civil works with appropriate space and machinery are needed. provisions for utility units such steam generation and refrigeration control, storage, and quality control. When choosing metals for equipment in dairy plants, look for materials that are nontoxic, tainting, corrosion-resistant, easy to clean, affordable, and long-lasting. Generally, alloys made of aluminum or 18:8 stainless steel are recommended.

4.1 Introduction
At the moment of secretion in the udder, milk is sterile; however, it is contaminated by bacteria before it is extracted from the udder. With the exception of mastitis, the bacteria are generally innocuous and restricted at this juncture. Microorganisms may contaminate the milk further during milking, handling, storage, and other pre-processing activities. The bacteria have the potential to either enhance the quality of milk or cause it to deteriorate. Some of the beneficial bacteria, particularly the lactic acid bacteria, are referred to as probiotics. These probiotics are gaining a more prominent position in nutraceutical dairy and other food products, which provide consumers with health benefits such as the control of diarrhoea, antihypertensive, hypocholesterolemia, immunostimulatory, and anticarcinogenic properties.

4.2 Lactic acid bacteria
This particular group of bacteria is capable of homofermentation, which is the process of fermenting lactose to lactic acid, and heterofermentation, which is the process of generating a high number of end products. They are commonly present in milk and are also used as starter cultures in the production of cultured dairy products, such as yoghurt.

5.1 Introduction
The process of milk processing entails the transformation of liquid milk into dairy products, including pasteurised liquid milk, yoghurt, butter, cheese, and ghee. The following are the rationales for processing: There are numerous benefits to processing milk, including the ability to access distant markets, the extension of the product’s storage life, and the attraction of higher prices because of its enhanced transportability. Furthermore, processed products are less cumbersome and lighter, which facilitates transportation. The refining of milk improves its quality and hygienic safety, enabling the production of a variety of milk products, including cheese and liquid milk, to satisfy the diverse needs of consumers. Additionally, the processing industry contributes to economic development by creating employment. Small-scale processors are capable of producing a wide range of dairy products. Before determining which dairy products the group will produce, it is recommended that a comprehensive market/feasibility study be conducted. Milk products can be processed in the manner depicted in the image.