eChapters

Family: Aizoaceae

Flowering: July-September

Fruiting: October-December

Botanical description: The plant is a succulent herb with prostrate forked branches, growing up to 20-45 cm long. Stems are prostrate or rising, somewhat succulent, up to 50 cm long or more, smooth or sparsely velvety. Leaves are flat, elliptic to obovate, 1-2 cm long, 0.4-2 cm wide, margins entire, tip blunt with rounded base. Leaf stalks are 0.5-2.5 cm long, expanded into a sheath joined with leaf base to form a cup. Flowers are pinkish or white in colour, borne solitary, stalkless, largely hidden in leaf axils. Capsule with a lower scarious or membranous portion and an upper brown. Seeds are black in colour with muricate concentric lines.

Family: Fabaceae

Flowering: September-October

Fruiting: November-January

Botanical description: Thye plant is a small diffused herb, with erect to creeping habit. Leaflets are 1-4 cm long, 8-35 mm broad, obovate to oblong-wedge-shaped, tip rounded to notched. The flowers of the plant yellow in colour, bloom in 8-20-flowered clusters, with a stalks 3 mm long and sepals nearly equal, shorter than or as long as the tube. The fruit is 1-2 cm long, 2-3 mm broad, linear, sharp tipped, curved and 4-8-seeded.

Family: Fabaceae

Flowering: December-January

Fruiting: February-March

Botanical description: The plant is an erect, annual and strongly smelling herb growing up to 10-50 cm in height. The Leaves are trifoliate with leaflets 1-3 cm long, 5-15 mm broad, obovate to inverted-lanceo shaped. Flowers are cream or yellowish-white, in colour, 1-2 together in leaf axils and 1.2-1.8 cm long. Pods are oblong, straight or falcate with age, 7.5-10 cm long with a long beak and 20 seeded.

Family: Fabaceae

Flowering: December-January

Fruiting: February-March

Botanical description: The plant is a scrambling and climbing herb, with stems almost hairless, up to 3 ft tall. The leaves are compound with 5-6 pairs of opposite leaflets and 1 terminal tendril. Leaflets are narrow, linear, 2.5-3.0 cm long, 2-3 mm wide. Flowers are borne singly or in pairs on short stalks arising at the base of the leaves, blue to purple in colour, large, up to 2 cm long. Seed pods are mainly black, linear, 4-6 mm broad, containing 10-12 round or angulated small seeds. The plant flowers and bears fruits during December-March.

Family : Rhamnaceae

Flowering: July-September

Fruiting: October-January

Botanical Description: Jackal Jujube is a very thorny straggling shrub with rusty-velvety young branches with paired thorns. Thorns are, one straight and the other recurved. Alternately arranged simple leaves are ovate to ovatelancelike, often oblique, with three prominent nerves and numerous transverse nervules. Tiny green flowers are borne in nearly stalkless velvety cymes in leaf axils. Fruits are spherical or obovoid drupes, black, shining, seeds woody.

1. Introduction

The emergence of food borne illness due to contaminated food is one of the most frequently occurring event and challenge for the food processing industry. This has resulted into economy as well as energy requirement to counter the food borne pathogens. Some of the important pathogenic microorganisms of concern are E. coli, Listeria monocytogenes, salmonella, etc. To address the food safety and quality issues, several non-thermal food processing technologies have been developed in the last decades, with an aim of achieving food safety without significantly affecting the quality of the food product. Cold plasma in one of the non-thermal processing technology, which has shown promising results as evidenced by recent scientific investigations.

The plasma is known as fourth state of matter after solid, liquid and gas state. Plasma contains diversity of energetic species including ions, electrons, atoms, excited molecules and charged particles. In a plasma, a significant number of electrons have such a high energy that no nucleus can hold them. When a gas is subjected to heat or an electric field, some of the atoms become ions and the gas is said to be ionized. An ionized gas in its normal condition, can conduct electric current to a limited extent. If the heat or electric current becomes extreme, many of the atoms become ions. The resulting super ionized gas, which can conduct a large and sustained electric charge. Plasmas are used in several materials processing industries like textiles, electronics, paper and glass industries etc.

1. Introduction

Biopolymers nowadays are grabbing a nice place in packaging industries replacing synthetic polymers. The most important advantage of biopolymer over synthetic polymers is that they are biodegradable and can be developed from agricultural or food processing wastes. Among the wide variety of materials currently used in food packaging, polymers have taken a major share because of their versatility and advantageous performance (Valdés et al., 2014). However, most polymers used for food packaging are not biodegradable or compostable and therefore represent an increasingly serious end-of-life disposal problem worldwide. Although food package stability during the shelf-life of the product is an advantage, it turns into a disadvantage when the packages enter the post-use phase.

15.1    Banana Chips/Crisps
    
15.2    Banana Puree/Pulp
    
15.3    Banana Flour
    
15.4    Banana Powder
    
15.5    Banana Flakes
    
15.6    Banana Figs or Dehydrated Banana
    
15.7    Banana Jam
    
15.8    Ready-To-Serve (Rts) Beverage
    
15.9    Banana Beer and Wine
    
15.10    Banana Vinegar
    
15.11    Banana Catsup
    
15.12    Banana Inflorescence Relish
    
15.13    Candied Banana
    
15.14    Other Banana Based Products

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

1    Biological Hazards
    1.1    Bacterial hazards
    
2.     Fungal Hazards
    
3.    Viral Hazards
    3.1     Hepatitis A virus
    3.2       Norwalk virus
    
4.    Parasitic Hazards
    4.1     Parasitic worms
    4.2    Protozoan parasites
    
5.    Aquatic Biotoxins
    5.1    Paralytic shellfish poisoning (PSP)
    5.2    Diarrheic shellfish poisoning (DSP)
    5.3    Amnesic shellfish poisoning (ASP)
    5.4    Ciguatera fish poisoning (CFP)
    5.5     Puffer fish (Tetrodotoxic) poisoning (PFP)
    
6.    Pathogen Survival Through Cooking
    
References

1. Introduction

The term nanotechnology was first coined by Norio Taniguchi in 1974 to describe controlled thin film deposition (Taniguchi, 1974). Nanotechnology is now generally recognized to include materials with a size in at least one dimension in the 1-100 nm range, although this terminology is not strictly enforced (Rao, 2008). In food science, there are many types of naturally occurring particles that fall within this size range and the use of a strict definition is problematic due to the large distribution of sizes (Kruif, 1998). Many natural foods contain nanoscale components and their properties are determined by their structure. These have been eaten safely for generations. In fact, some of food’s most important raw materials (proteins, starches, and fats) undergo structural changes at the nanometre and micrometre scales during normal food processing(Morris and Parker 2008). Food proteins (for example, native beta-lactoglobulin, which is about 3. 6 nm in length) can undergo denaturation (via pressure, heat, pH, etc. ) 

1.    Introduction
    
2.    Resources
    2.1    Crustacea
    2.2    Zooplankton
    2.3     Mollusca
    2.4     Insecta
    2.5     Thallophyta
    
3.    Biosynthesis
    
4.    Structure
    
5.    Detection and Estimation of Chitosan
    
6.    Specification of Chitin and Chitosan
    
7.    Economics of Chitin Recovery and Production
    
8.    Social and Economic Value of Chitosan
    
9.    Production of  Chitosan from Chitin
    
10.    Production of Glucosamine Hydrochloride
    
11.    Recent Advances in Applications of Chitin and Chitosan
    11.1    Applications of chitin, chitosan and glucosamine hydrochloride
    
12.    Advantages of Chitosan
    12.1    Cholesterol and overweight lowering
    12.2    Cholesterol lowering in Human
    12.3    Osteoarthritis prevention and Treatment
    12.4    Carrier for nasal application of drugs
    
13.    Conclusion
    
References and Further Reading

1.    Introduction
    
2.    Edible coatings used in Seafood Products
    2.1    Pre-dust
    2.2    Batter
    2.3    Breading
    
3.    The Coating Process
    3.1    Portioning
    3.2    Pre-dusting
    3.3    Application of batter
    3.4    Application of breading
    3.5    Pre-frying / Flash frying
    3.6    Freezing
    3.7    Packing and storage
    
4.    Coating Process Equipment
    4.1    Forming machine
    4.2    Pre-dusting machine
    4.3    Batter application equipment
    4.4    Breading application equipment
    4.5    Fryers
    4.6    Spiral freezers
    
5.    Coating Process Lines
    5.1     Single line breading system
    5.2     Tandem line breading system
    5.3     Tempura or batter-fry  Line breading system
    5.4     Tempura-Japanese Line breading system
    
6.    Coated Fishery Products
    6.1    Fish fingers
    6.2     Coated fish sillets
    6.3     Fish mince based coated products
    6.4     Coated shrimp products
    6.5     Coated squid products
    6.6     Coated bivalve products
    6.7     Crab claw balls
    
7.    Common Quality Problems Encountered during the Coating of Seafood
    7.1     Voids
    7.2     Blow off
    7.3     Pillowing
    7.4     Tailings
    
8.     Innovative Processes in the Production of Coated Products
    
References

Most banana producers in Africa, Latin America and Asia are small-scale farmers who grow bananas either for home consumption or local markets. Because bananas and plantains produce fruit year-round, they provide an extremely valuable food source during the hunger season (when the food from one annual/semi-annual harvest has been consumed, and the next is still to come). Bananas and plantains are therefore critical to global food security. However, the export trade of banana depends mainly on commercial plantations in Latin America, East Asia and Africa. These plantations are owned by multinational corporations.

1. Introduction

Kiwi fruit (KF) is very much acceptable for preservation by freeze-drying (FD) technique, since it has very much health benefits such as low calorific value, low glycemic index (GI), more vitamins (particularly vitamin C), maximum load of potassium, presence of variety of pigments, few important enzymes, low allergic response (AR) and finally it is rich in natural antioxidants, polyphenols. It is translucent, green pulp and many black seeds arranged nicely with covered by hairy and brown skin. The KF seeds are small sizes and black colored surround inner circularly through the whole pulp. It gives a nice crunch during consumption and provides a number of essential nutrients. Therefore, it will be remembered that seeds cannot be discarded during processing of KF unlike other fruit (jamun etc. ) seeds.

1. Introduction

The culinary banana (Musa ABB) of Assam and North East India (locally known as kachkal) is an important and cheap source of vegetable in the diet of local people. It is considered as one of the potential sources of carbohydrates, starch, polyphenols, micronutrients and functionally important bioactive compounds (Khawas et al., 2016). Native starches have limited use in food application as it has many weakness such as narrow peak viscosity range, poor process tolerance, low shear stress resistance, hydrophilicity, thermal decomposition, high retro gradation, and synersis and cooked starches will formed a weak, cohesive and rubbery paste. These facts motivated the employment of modified starches as important functional ingredients in processed foods in recent years because of their improved functional properties over unmodified starches (Fleche et al., 1985).

To overcome these problems physical. Chemical and enzymatic modification of Starch is done. Chemical modification of starch generally involves esterification, cross linking, etherification or oxidation of the available hydroxyl groups on the β-D-glucopyranosyl units that make up the starch polymer.

1. Introduction

The Refractance Window drying system uses circulating hot water, usually at 90°C and at atmospheric pressure, so that it can carry the thermal energy to the material to be dehydrated. Thermal energy is transferred to the wet product from circulating hot water through a plastic interface which is transparent to the infrared radiation. The actual product temperature is kept below 70°C. The heated water is recycled and reused, which helps in improving the thermal efficiency of the system. The use of hot water as the heat transfer medium and at temperatures just below boiling is a design feature that is unique to this drying method. In RW drying, there are three modes of heat transfer, namely conduction, convection, and radiation. The process water is heated by steam within an insulated tank and then circulated in shallow troughs to transfer thermal energy to the plastic conveyor. As the plastic conveyor is very thin, it reaches the temperature of hot water flowing beneath it almost immediately. By conduction and radiation, the thermal energy from the hot water is transmitted through the plastic conveyor. The use of process water at temperatures just below boiling and a thin plastic conveyor with infrared transmission in the wavelength range that matches the absorption spectrum for water all work together to facilitate rapid drying.

1. Introduction

Purple colour passion fruit (Passifora edulis Sims) is a tropical fruit and is well known for its nutritional content and medicinal properties (Patel, 2009). Various type of vitamin E such as α-tocopherol (5,7,8 trimethyl), β-tocopherol (5,8 dimethyl),g-tocopherol (7, 8-dimethyl),d-tocopherol (8-methyl) and α-tocotrienol, b-tocotrienol,g–tocotrierol and d- tocotrienol were quantified in passion fruit as antioxidant molecules with various health benefits (Ramaiya et al., 2013).

Foam mat drying convert thin pulp into stable foam by whipping. Eventually, the whipping process increases surface area, and speed up the drying rates which yield dried foam mat powder of acceptable quality in reduced time span (Kudra and Ratti, 2006). Rheology plays a vital role in food manufacture and marketing nowadays viz., design of handling systems, quality control and evaluation of sensory stimuli of viscosity (Barnes, 2001). It also concerns with how all food materials respond to applied forces and deformations. Basic concepts of stress (force per area) and strain (deformation per length) are keys to all rheological evaluations. Stress(r) is always a measurement of force per unit of surface area and is expressed in units of Pascals (Pa). The direction of the force with respect to the impacted surface area determines the type of stress. Normal stress occurs when the force is directly perpendicular to a surface and can be achieved during tension or compression. Shear stress occurs when the forces act in parallel to a surface. Various food shows different rheological behavior and categorized into solid and liquids stages. It basically means that food varies their characteristic in viscous and elastic behaviors commonly known as viscoelasticity of food, caused by entanglement of long chain molecules with other molecules (Abang, 2010). The dough rheology of various flour has been investigated by various research. Although, there has not been any published literature about dough rheology with incorporated passion fruit powder. To the best of our knowledge, there are no published reports regarding the shear stress properties of passion fruit powder incorporated rice dough.

1. Introduction

Underutilized fruits and vegetables are commercially neglected but recognized as rich sources of nutrients and non-nutrient bioactive compounds (Ali et al., 2008). These crops are very popular among local communities in many parts of the world and well accepted in their traditional diets and therapeutic medicines (Animesh et al., 2010). Nowadays, these are gaining significance in research and development programs of many organizations. Meghalaya is endowed with rich and unique diversity of indigenous wild edible fruit species of which most of them are less known and underutilized (Haque et al., 2009). There are rich in functional bioactive components such as vitamins and minerals are the much talked dietary nutrient for women and children health. It is being supplied to body through tablets, vegetables, fruits and other food items (Islam et al., 2012).

1. Introduction

Ohmic heating is an emerging method of thermal processing which have the feature of HTST treatment (Halden et al., 1990) with lower energy inputs (Choi et al., 2011; Sastry et al., 2011). During ohmic heating (Fig. 1) the alternating current is passed through the food material, where food acts as a resistor to the flow of electric current and leads to the instant volumetric heat generation by following the Joules first law of heating (Pereira & Vicente 2010; Lima et al., 1999 and 2001; Wang, 2014). Ohmic heat treatment of food material has been found to reduce microbial load of the food material simultaneously with the inactivation of the inherent enzymes (Demirdoven & Baysal 2014; Yildiz & Baysal 2006; Jakob et al., 2010). Despite the problems of electrochemical degradation associated with it, ohmic heating has been successfully studied for its use in preheating, blanching, pasteurization and extraction (Leizerson, & Shimoni, 2005; Lima & Sastry, 1999; Lakkakula et al., 2004). A majority of studies that have explored the effect of ohmic treatment have focused on a number of commercial products from pulp (strawberry), or puree (pea) to juice (grape), etc. (Castro et al, 2004; Icier et al, 2008; Icier et al., 2006). However, the present chapter is confined to put some light on the studies conducted on ohmic heating of various liquid food material and its effects on various parameters of the food material.