eChapters

The peach tree (Prunus persica L.) is a species of Prunus native to China that bears an edible juicy fruit called a peach. It is a deciduous tree growing to 4–10 m (13–33 ft) tall, belonging to the subfamily Prunoideae of the family Rosaceae. It is classified with the almond in the subgenus Amygdalus within the genus Prunus, distinguished from the other sub genera by the corrugated seed shell. Among the temperate fruit’s peaches require relatively less chilling temperature. Now peach is a commercial crop in Argentina, Austria, Canada, Chile, Europe, USA, China, India and Japan. In India, it grown in hills of Uttar Pradesh, Jammu & Kashmir, Himachal Pradesh, Uttar Pradesh and Punjab.

Cultivars/Varieties: Sun Red, Red, Nectarine, Kateroo, Flordasun, Florda gold, Sharbati, Maygold, Kanto-5, Stark Early Flame, Summerset, Early White Giant, Redglobe, Alexander, First Gold, Early Gold and Sweet Gold.

Uses

Peachs are grown both for dessert and processing purposes. It is also used for making wine. Peach fruit juice is a common drink. Peach kernel has high protein and its oil is used in food, cosmetics and pharmaceutical products. The cake after extraction of oil can be used for various purposes. Peach flowers and leaves are anthelmintic and purgative.

The pear or naspati (Pyrus spp) is a popular temperature fruit next to apples. It ranks high among sub-acid fruits as it contains less acid than almost any other fruit. Pear belongs to the genus Pyrus under the family Rosaceae and sub- family Pomoideae. The European pear (Pyrus communis) with a persistent calyx, fleshy pedicels and pyriform shape is different from Pyrus pyrifolia or Pyrus serotina (Asiatic pears) and are non-fleshy pedicels with apple shape.

It has been used as a food from time immemorial. The pear is a wholesome fruit and at par in importance with the apple. The flesh of the pear is, however, slightly harder than the apple, but it is juicier than the apple. Like the apple, it has few seeds. It grows on a comparatively large tree. It has generally yellow and brown colour. Sometimes, there is also a tint of red. It has several several varieties across the world.

It originated in mountainous reach of western China. The major pear producing countries are Italy, USA, Japan, Spain, France, Germany, Turkey and Australia. In India, it is mainly grown in Jammu & Kashmir, Himachal Pradesh and hills of Uttar Pradesh.

Cultivars: In India, Bartlett is widely grown in Kashmir. Kieffer, a cross between Pyrus communis and Pyrus pyrifolia, is popular in South India. In Punjab, the popular varieties ar Patharnakh, Le Conte, Smith and Kieffer.

1. Introduction Millets, one of the earliest foods consumed by humans, may have been the first cereal grain utilised in domestic cookery. It belongs to the Graminae grass family. The name “millet” describes a number of little-seeded grasses (annual) that are classified into five genera: Setaria, Panicum, Pennisetum, Paspalum, and Echinocloa in the tribe Paniceae, and one genus: Eleusine in the tribe Chlorideae (Pushpavalli, 2015). India ranks first in the production of millets followed by Niger and China (FAO, 2020). Pearl millet (Pennisetum glaucum) serves as food, fuel, and fodder on a global scale. Since, it contributes up to 75% of all grain output in East Africa and several regions of India; it plays a significant role in indigenous diets. After rice and wheat, pearl millet is the third most significant crop farmed in India. Ninety percent of the country’s land is used for cultivating pearl millet, with Rajasthan, Gujarat, Maharashtra, Uttar Pradesh and Haryana being the main states.

1.1 Introduction Pearl millet [Pennisetum glaucum (L.) R. Br.] is a warm-season, C4 , annual cereal crop mainly grown for food, feed and fodder purpose. It is diploid species having chromosome number 2n = 2x = 14, belongs to genus Pennisetum, tribe Paniceae of Gramineae family. It has several species e.g., americanum, typhoides, and glaucum. Pearl millet originated in northern Africa in the region from western Sudan to Senegal. It is the sixth most important cereal crop in the world and third most important crop in India after wheat and rice.1.2 Area and Production Pearl millet is cultivated in arid and semi-arid regions of the world. India is the largest producer of millet in the world. In India, pearl millet occupies 6.93 million ha with an average production of 8.61 million tones and productivity of 1243 kg/ hac. The major pearl millet growing states are Rajasthan, Maharashtra, Gujarat, Uttar Pradesh and Haryana which account for more than 90% of pearl millet acreage of the country and are commonly grown in kharif season. It is also cultivated during the summer season in parts of Gujarat, Rajasthan and Uttar Pradesh and during the rabi season at a small scale in Maharashtra and Gujarat.

1. Introduction

Pectin is a polysaccharide present in the middle lamella of plant cell walls. The firmness and structure of the plant tissue are attributed to the presence of pectin in the middle lamella. The insoluble form of pectin is called protopectin and the soluble form is called soluble pectin (Kertez, 1951). Protopectin is abundant in green fruits and contributes to hardness of cell, where as soluble pectin is responsible for viscous nature of juice and pulp. Conversion of protopectin to soluble pectin results in loosening of the bonds between the cells and softening of the fruit tissues. Protopectin is reported to be hydrolyzed to pectin by enzyme action during ripening. Protopectin on restricted hydrolysis yields pectin or pectinic acid. Braconnot (1825) discovered pectin as the gelatinous principle of fruits.

A white to light brown powder, is a heteropolysaccharide derived from the cell wall of higher terrestrial plants. It is mainly used in food as a gelling agent in jams and jellies. Today it is also used in fillings, sweets, as a stabiliser in fruit juices and milk drinks and as a source of dietary fiber in foods. Pectin is a heterogeneous grouping of acidic structural polysaccharides, found in fruit and vegetables and mainly prepared from ‘waste’ citrus peel and apple pomace. Pectin has a complex structure. Preparations consist of sub-structural entities that depend on their source and extraction methodology. Commercial extraction causes extensive degradation of the neutral sugar-containing side chains.

Pectin was first isolated and described in 1825 by Henri Braconnot, though the action of pectin to make jams and marmalades was known long before. To obtain well set jams from fruits that had little or only poor quality pectin, pectin-rich fruits or their extracts were mixed into the recipe. During industrialization, the makers of fruit preserves soon turned to producers of apple juice to obtain dried apple pomace that was then cooked to extract pectin. Later, in the 1920s and 1930s, factories were built that commercially extracted pectin from dried apple-pomace and later citrus-peel in regions that produced apple juice in both the USA and in Europe. At first pectin was sold as a liquid extract, but nowadays pectin is often used as dried powder that is easier to store and handle than a liquid

1. Peeling: It is one of the integral parts of a food processing, and most agri-cultural crops need to be peeled to remove at the initial stage of food processing Peeling removes inedible portion (peel, seeds, and stalk) of fruits and vegetables. However, the susceptibility to spoilage increases due to acceleration of physiological process and the exposure of the tissues to microorganisms. The shelf-life and quality of fresh-cu produces could be compromised with the peeling.
The goals of optimum peeling operation are i. Minimizing product losses, ii. Types of products e.g., potato products, iii. Minimizing heat ring formation e.g., apple, potato, iv. Minimizing energy and chemical usage, v. Minimizing the environmental pollution.
Peeling operation can be grouped under following categories: Manual peeling (knife or blade), Mechanical peeling (abrasive devices, devices with drums, rollers, knives or blades and milling cutters), Chemical peeling, Enzymatic peeling, and Thermal peeling (Flame or dry heat peeling, steam or wet heat peeling, thermal blast peeling, and vapour explosion or vacuum peeling.

What is Performance Appraisal?

Performance Appraisal (PA) is the process through which an individual employee’s behaviour and accomplishments for a fixed time period are measured and evaluated. The major purpose of measuring and evaluating is to assess the worth or value of an employee. Performance appraisal is a systematic and objective way of judging the relative worth or ability of an employee in performing his task. Performance appraisal helps to identify those who are performing their assigned tasks well and those who are not and the reasons for such performance.

Introduction

Irrigated agriculture plays a predominant role in the state’s food grain production. Erratic trend of rainfall, it has been realized that the availability of water will become very less in forthcoming days as a result cultivation of crops will face water crisis. Development of new water resources needs excessive money investment with high level of expertise and technical knowhow. The ground water is also falling down to greater and greater depth due to overdraft causing for the restriction of the construction of tube wells. Further the efficiency of traditional irrigation system in India is now varying from 30% to 40% against 62 to 65% during the project plan periodbecause of wastage of this valuable water resource due to mismanagement. To meet the increasing demand for additional food grain production, the demand for water in the irrigation sector will increase substantially. In such a situation conservation of water and its proper management is necessary for developing a sustainable agricultural system avoiding the degradation of the land quality, water and other natural resources in an irrigated area.

Popularly known as Japanese, or Oriental, persimmon, it is also called kaki (in Spanish, caqui), Chinese plum or, Chinese fig when dried, belongs to the family Ebanaceae. The tree is native to Japan, China, Burma and the Himalayas and Khasi Hills of northeastern India.

Uses

Fully ripe Japanese persimmons are usually eaten out-of-hand or cut in half and served with a spoon. The flesh may be added to salads, blended with ice cream mix or yogurt, used in pancakess, cakes, gingerbread, cookies, gelatin desserts, puddings, mousse, or made into jam or marmalade. The pureed pulp can be blended with cream cheese, orange juice, honey and a pinch of salt to make an unusual dressing.

The compliance with hygienic and aesthetic standards in the dairy factory is, in the final analysis, dependent on the human element. Each employee, from top management to the most junior operative, has his role in the factory sanitation programme and carelessness at any stage may cause quality deterioration of products or endanger the health of consumers. Legal action against the dairy may also result from neglect of hygiene. Personnel hygiene refers to the personal cleanliness and related habits of the workers. Milkborne infections frequently originate from food contaminated by workers through their hands, breath, hair, perspiration, pimples, infected wounds, coughs, and sneezes. Transfer of even traces of human and animal excreta by the workers is a potential source of pathogenic microorganisms. Foodborne illness is known to originate from workers who were ill and practiced unsanitary food handling methods or poor personal hygiene. Even the healthy worker, who does not exhibit the symptoms of the disease, may harbour food poisoning bacteria in the respiratory or intestinal tract. It is always desirable, as a matter of practice, to look at different parts of the human body in terms of potential sources of bacterial contamination. Provisions regarding personal hygiene of employees are contained in all legislation dealing with milk treatment.

Introduction

In the era of communication and information, each one of us should have access to information as per our choice, interest, priority, need and requirement. We all are playing different role in different walk of life in different capacity, for different professions, avocations, duties and responsibilities as well. To internalize any concept or idea, a perceptual clarity is very much necessary for interweaving it in our experiential textures. This is possible when more and more number of sensory organs are engaged in a learning situation irrespective of the subject or content to learn. In 21 Century with the advancement of science and technology, more particularly, Information and Communication Technology (ICT), it is possible to establish the connectivity on e-mode and do the things on virtual mode to the possible extent. It is quite possible in urban set up with proper infrastructural facilities both at the source as well as at the receiver end, without any distortion of message on account of electricity failure or wrongful handling of computer or any gadget for that matter.

Pesticides are an undeniable part of modern life, used to protect everything from flower gardens to agricultural crops from specific pests. Pesticides have contributed significantly to improving quality of life and safeguarding the environment. Some 20 to 40 percent of the world’s potential crop production is already lost annually because of the effects of weeds, pests and diseases (according to the FAO reports) (www.CropLifeAmerica.mht). In addition to increasing crop yields, crop protection products used in stored products can also prolong the viable life of products, prevent huge post-harvest losses from pests and diseases and protect food safety for eating.

Introduction

The term pesticide refers to any chemical or mixture of chemicals intended for preventing, attracting, repelling, controlling or regulating a pest, including unwanted species of plants and animals during the production, shipment, transit, storage, processing or distribution of any food or agricultural commodity. The term includes compounds classified as insecticides, fungicides, herbicides, accaricides, rodenticides, plant growth regulators, sprouting inhibitors, chemosterilants, desiccants etc. The term excludes substances like animal drugs and food additives. Pesticides are chemicals used to destroy or control weeds, insects or other pests. The term pesticide residue refers to the remnants of the pesticide after weathering and it consists of the parent molecule and the degradation products which are toxicologically significant. In general, the pesticides, by virtue of their inherent toxic nature are recommended to be used as per Good Agricultural Practices (GAP) only. If GAP is not followed, contamination of the produce with the residues may pose significant health risk to consumers, non target organisms, biota and environment as a whole. When a pesticide is used for pest control purposes, they may reside in the form of metabolites.

Pesticide residues occur as the leftover of any pesticide after its application for pest control and it includes the parent compound and its toxic metabolites. Pesticide residue analysis may be defined as qualitative and quantitative analysis of samples drawn from agricultural field, market and environment for pesticides and toxic metabolites. Pesticide residues are invariably present in micro – quantities and generally estimated at ppm/ ppb levels. After application of the diluted spray solution, they are present at sub microgram levels in the substrate and hence their estimation at ppm or ppb levels is very cumbersome and need to be performed with utmost care. Moreover, the residue data generated should be accurate, reliable and reproducible. The level of residue in any edible commodity has to be below their prescribed maximum residue limits (MRL) value for market acceptance and below maximum permissible intake (MPI) for safety to consumers. Pesticide residue data are mainly utilised by regulatory authorities for estimation of MRLs and for assessing impact on human health and environment, particularly their adverse effect on non-target organisms. The detection of the pesticide residues must be confirmed beyond doubt and confirmation by GC-MS/MS or LC-MS/MS is generally acceptable. Since pesticide residues include parent compounds, isomers and toxic metabolites, appropriate methods of detection should be selected so that all the components are measured separately. Environmental samples/ market usually contain residues of large number of pesticides, for which multi residue methods are required for estimation/screening of such samples.

pH is important as a measure of active acidity which influences the flavour and palatability of the product and affects the processing requirements. This is an indicator of the acidity or alkalinity of the solution. It is also taken as the measure of the sourness or tartness of the given sample. The pH of a solution varies from 0 to 14. Solutions having a value of pH ranging from 0 to 7 on the pH scale are termed as acidic and the value of pH ranging from 7 to 14 on the pH scale are known as basic solutions. While, solutions with a pH value equal to 7 on the pH scale are known as neutral solutions. Samples with a pH value equal to 0 are known to be strongly acidic. Further, the acidity decreases as the value of pH increases from 0 to 7 whereas, solutions with the value of pH equal to 14 are termed as strongly basic solutions.
Most fruits have a pH value ranging between 3-4, with citrus fruits exhibiting a pH of up to 2.0. Vegetables may exhibit a pH of up to 6.0, as such they are classified as non-acid or low-acid foods. Based on pH value, most fruits, vegetables, and their products are classified into four arbitrary groups such as low acid (5.3 and higher); medium acid (5.3-4.5), acidic (4.5-3.7), and high acid (3.7 and lower). pH value of some fruits, vegetables, and their products is given as under:

Phalsa belongs to the family Tiliaceae where only one genus, Grewia, yields edible fruit. The only species of any importance is G. subinaequalis DC. (syns. G. asiatica Mast), long referred to in literature as Grewia asiatica L. Phalsa is the most used vernacular name in India, where there are a number of local names. The plant is called falsa in Pakistan. Phalsa is commercially cultivated in India in states of Punjab, Haryana, Rajasthan, Uttar Pradesh and Madhya Pradesh.

Cultivars/Varieties: Two distinct types, viz. Tall and Dwarf were recognized in Hisar and dwarf type was found to be more productive. Some call them as ‘Local’ and ‘Sharbati’.

Uses

The fruits are eaten fresh as dessert, are made into syrup, and extensively employed in the manufacture of soft drinks. The fruit is used in making juice and squash. The bark is used as a soap substitute in Burma. A mucilaginous extract of the bark is useful in clarifying sugar. Fiber extracted from the bark is made into rope. The wood is yellow-white, fine-grained, strong and flexible. It is used for archers’ bows, spear handles, shingles and poles for carrying loads on the shoulders. Stems that are pruned off serve as garden poles and for basket-making.

4.1 Phases of technology transfer
To translate laboratory research into market ready product, it is important to understand steps or phases involved in this technology transfer process. The process typically includes six main phases, each with a different role (figure 9).
4.1.1 Research
Technology transfer begins with research, the critical stage of exploring and discovering novel knowledge, technologies, or innovations that may have potential commercial applications. The research phase can occur in academic institutions, research organizations, or private sector companies, often funded by public or private sources. Thorough research ensures that the technologies being transitioned are scientifically and technically robust, thereby increasing their potential for market success. Therefore, the research phase involves creating and evaluating new ideas, confirming their feasibility, and identifying IP prospects, all of which are key components of TT success.
4.1.2 Innovation disclosure
Innovation disclosure is the first formal step where the innovation is reported to the appropriate TTO or IP management team. This process ensures that the institution or organization recognizes the innovation and evaluates its potential for protection and commercialization. It includes following information:

Introduction Solid–liquid extraction process, has been extensively used for extraction of bioactive compounds from plant food matrices by using appropriate solvent, which can be used as functional ingredients and additives in food processing, pharmaceutical sectors, and others industries. Usually this extraction/recovery process is based on unsteady diffusion of compounds targeted for extraction, through the matrices followed by the dissolution of the extractable compounds in the bulk of the used solvent (Milic, Rajkovic, Stamenkovic, & Veljkovic, 2013). The concentrations of bioactive compounds in food matrices as well as in the extracts are generally low in percent, so extra energies are required to improve the yield of the extraction process while minimizing the overall cost. From the technological approach, extraction process is mainly associated with the operating variables such as solvent used, extraction technique, operating temperature, concentration of solid in solvent, and extraction time, and by optimizing these parameters extraction yield could be enhanced (Milic et al., 2013; Orphanides, Goulas, & Gekas, 2014).

Milk is a complex colloidal dispersion, the physical and physicochemical properties of which depend on intrinsic compositional and structural factors, extrinsic factors such as temperature, and post-milking treatment.

There is no clear dividing line between physical properties and physicochemical properties. However, physical properties may be thought of as the measure of the bulk behaviour of milk and of how milk interacts with energy, while physicochemical properties are measures of how bulk behaviour and energy interactions depend on the constituent colloidal particles, molecules, atoms and ions in milk.

Knowledge of physical properties is of importance particularly in the technological and engineering design and control of milk processes and processing equipment. Knowledge of physicochemical properties provides the basis for the design of modern methods of milk analysis, determination of milk microstructures and elucidation of the complex chemical reactions that occur in milk.

In the dairy industry measurements of the physical properties of milk and milk products are made to secure data necessary for the design of dairy equipment (e.g., heat conductivity and viscosity) to determine the concentration of a component (e.g., specific gravity to estimate solids-not-fat or freezing point to determine added water), or to assess the extent of a physical or chemical change (e.g., titratable acidity to follow bacterial action or viscosity to assess aggregation of protein micelles or fat globules). The great advantage of physical measurements for such purposes is their speed and simplicity as well as their potentialities for automation.

Use of physical property to measure concentrations or changes in degree of dispersion demands knowledge of the contribution of the several components to that property. Furthermore, the natural range of variation of the property in milks or products is of major interest. The precision and suitability of possible methods of measurement are also of prime importance.

Physical Chemistry of Foods

    1.    Thermodynamics is primarily concerned with energy and entropy. Energy, also called internal energy (U), comprises heat and work; it is measured in joules (J).

    2.    Energy may be recalled that work generally equals force times distance (in N_·m = J) and that force equals mass times acceleration (in kg ·m· s^-2 = N).

    3.    According to the first law of thermodynamics, the quantity of energy, i.e., heat (q) work (p) potential energy, is always preserved.

    4.    Entropy (S)  is a measure of disorder; it is given by   
        S = K_B ln Ω
        Where K_B is the Boltzmann constant (1.38 ×10^-23 J × K^-1) and W is the number of  ways in which the system can be arranged, also called the number of degrees of freedom.

    5.    Colligative solution properties : The lowering of the chemical potential of a solvent by the presence of a solute causes changes in a number of physical properties: vapor pressure, boiling point, freezing point, osmotic pressure, etc. (the magnitudes of these changes all are proportional to the mole fraction of solute).