eChapters

Since time immemorial, spices have played a vital role in world food trade, due to their varied properties and applications. We primarily depend on spices for flavour and fragrance as well as colour, preservative, inherent therapeutic, medicinal and appetizing properties. The spices that India can offer in abundant quantities are pepper, ginger, turmeric, chili, cardamom, celery, fenugreek, fennel, cumin, dill, coriander, cinnamon, ajowan, cloves, nutmeg, mace etc.

Pineapple is a tropical plant with edible multiple fruit consisting of coalesced berries. It is named after pine cone due its resemblance with its structure. It is the most economically important plant in the family of Bromeliaceae. It is widely grown throughout the world for its dual-purpose use in the form of fresh fruit and many processed products. It is a tropical fruit having excellent taste, juiciness, aroma and flavour which is preferred by many people. It is also rich source of fibre, potassium and vitamin C, vitamin B1 and vitamin B6. One of the important constituents in the fruit is proteolytic enzyme bromelein which is known to have significant use in treating conditions like inflammation, sinusitis, arthritis and early recovery from surgery (Joy, 2010). Bromelein is a digestive enzyme also used as meat tenderizer. Pineapple is cultivated in an area of 106.22 thousand ha and total production is 1,527.93 thousand tons (APEDA). Major producing states of pineapple were West Bengal, Assam and Karnataka. Pineapple is highly perishable fruit which transpires heavily and lose moisture thus have high susceptibility to spoilage microorganism (Hossain and Bepary, 2015). There are often several difficulties in production of pineapple with its physiologically active state even after harvest and non climacteric nature. Even though production is more, there are enormous post harvest losses for the fruit. The overall losses being encountered constitute 32.12 percent (6.82% at farm level, 3.09% at wholesale market and transportation, 5.44 % at retail market level, 5.64% during storage, 4.31% in processing unit and 6.82% at consumer level respectively) as reported by Ningobam, (2019).

Introduction

Many post-harvest treatments are applied to horticultural crops, either to maintain the quality (taste, colour, flavour, texture) or improve the visual appeal. Most important of these treatments are temperature management including the cold chain where the temperature of the crop is reduced rapidly and stabilize temperature after harvesting. Exposing the crop to high or low temperature and application of chemicals after harvest helps in managing/ prevent pest and diseases and sprouting occurrence respectively.

Harvested produce must be handled with care at every stage to avoid the mechanical damage and subsequent fungal/bacterial infection. Adopting appropriate post-harvest handling operation will minimize the all ill effects of post-harvest (Fig. 1).

Horticulture sector, comprising fruits, vegetables, floriculture, medicinal and aromatic crops, mushroom, spices and plantation crops, had witnessed phenomenal growth in production and productivity during the last two decades. Resultantly, horticulture in India is recognised as one of the fastest growing sectors in the world. The production has reached to 351.92 million tonnes in 2022-23 as compared to 231 million tonnnes in 2010. Progressive urbanization, increased spendable income and awareness for balanced and nutritious food have contributed towards increasing demand of horticulture produce. The increasing demand coupled with higher income returns per unit area has triggered this growth pattern, which has been largely possible due to policy environment to support horticulture both for research and development.

Fruits and Vegetables are highly perishable in nature due to which huge spoilage (damage) takes place during the period between harvesting and consumption. Fruits and Vegetables after harvesting are often poorly handled and in many cases neither cleaned nor washed. Improper handling may cause physical damage due to tissue breakdown which results mechanical damages and physiological changes in harvested fruits and vegetables. Mechanical losses include bruising, cracking, cuts, microbial spoilage by fungi and bacteria and physiological losses include changes in respiration, transpiration, pigments, organic acids and flavour.

Introdction

Fruits are an important supplement to the human diet, as they provide minerals, vitamins and fiber required for maintaining good health. Fruits are also rich in phytochemicals (7, xanthophylls, polyphenols, flavonoids, phenolic acids, organic acids etc.) which possess good antioxidant properties. India’s diverse climatic conditions ensure availability of almost all the varieties of fresh fruits and vegetables. According to FAO (2021), the country ranks first in the production of bananas (26.45%), mangoes (including mangosteens and guavas) (43.80%) and papayas (39.30%). The scenario of horticulture crops in India has become very encouraging. The percentage share of horticulture output in agriculture has become 33 per cent (Anonymous 2021). India has witnessed increase in horticulture production over the last few years. Significant progress has been made in area expansion resulting in higher production. Over the last decade, the area under horticulture grew by 2.1 per cent per annum and annual production increased by 3.9 per cent. During 2020-21, the production of horticulture crops was 334.60 million tonnes from an area of 27.74 million hectares. The production of fruits has increased from 76.42 million tonnes in 2011-12 to 108.34 million tonnes in 2022-23 (Agricultural Statistics at a Glance 2022). The area under cultivation of fruits stood at 7.05 million hectares. The total production of fruits in the year 2020-21 was highest in case of Andhra Pradesh (17.70 million tonnes) followed by Maharashtra (11.73 million tonnes) and Uttar Pradesh (11.23 million tonnes) (Anonymous 2021). India now is the second largest producer of vegetables and fruits in the world. The country ranks at first position in the production of banana, mango, lime and lemon, papaya and okra. The area and production of fruits in India is presented in Table 1. The fruits namely banana, mango, citrus, papaya, guava, grapes, apple, pineapple and sapota account for more than 85 per cent of the total production of fruits. The other fruits which are produced in India are almond, walnut, jackfruit, bael, ber, custard apple, kiwi, passion fruit, peach, pear, plum, strawberry etc.

Abstract

High moisture paddy can be dried in a trolley drier at farm level/grain market to reduce losses during various post harvest operations. During last two paddy harvesting seasons quality analysis of eight, most popular varieties of fresh paddy arrivals from about 40 grain markets, scattered all over Punjab, was performed. Monitoring of paddy in grain markets showed that maximum number of samples (62.7%) was in the range of 12-18%, moisture content (w.b.). Over-dried paddy samples (<12% m.c., w.b.) were only 9.1%. The samples with more than 18% m.c ,w.b. (high moisture paddy) were 28.2%, which have to be dried to safe moisture levels. Milling characteristics of the analyzed samples indicated that the broken percentage was highest (25.5%) in PR-113 followed by PR-111 (20.6%) and minimum in Pusa-44 (12%). The highest insect- pest infestation (Sitotroga cerealella (olivier) was observed in PR-108, followed by PR-116, PR-113, PR-111, Lal Mundi, Govinda, PR-114 and Sharbati. The Mycoflora isolated and identified were Aspergillus, Penicillium, Mucor, Rhizopus, Alternaria, Curvularia, Helminthosporium and Cladosporium spp. Maximum fungal infestation were associated with samples of PR-108 variety. To avoid further proliferation of mycoflora and inset pests, paddy should be dried to safe moisture levels for further storage and processing. For this, a trolley drier has been developed by converting a conventional farmer’s tractor trolley, into a portable drier, which can reduce 5% moisture of 1 tonne batch of paddy in about 100 minutes, consuming 56 kWh of electrical energy

I. POST HARVEST DISEASES

A. Post-Harvest Diseases of Fruits

Post-mortem (PM) examination
The core objective of post-mortem examination is to identify and eradicate defects and contaminations and thus, confirming that only meat suitable for ingestion are allowed to be passed
Facilities for post-mortem inspection
• Normal infrastructure amenities which delivers comfortable working environment and assist in presenting the carcases and its offals for PM examination
• Every inspection place on the dressing over-head line must have lights of -- 540 lux (50 foot-candle) intensity light which does not alter the normal colours
• Adequate facility for sanitising the hands, equipments and aprons should be provided
• To sterilise the knives, cleavers and saws–a water bath operating at 82 ºC
• Head, viscera and carcase are the three major inspection parts
• On moving rails, viscera from a particular animal should move little ahead of its carcase so that any abnormality in viscera could be conveyed to the carcase examiner well in time
• For precise recognition of carcases and its correlated viscera from an animal, the lines conveying the carcases and viscera should move in synchronized way
• When a carcase is declared unfit for human consumption, all its the related parts such as head, viscera, blood and hide must be collected and disposed off
• Every inspection point must have a easily accessible overhead rail line stop button

Post-mortem glycolysis (anaerobic glycolysis)
• Post-mortem glycolysis is the basic function of muscle
• Irreversible anaerobic glycolysis starts after the animal has died and oxygen supply to the muscles is cut
• The various biochemical steps that occur in living animals for the conversion of glycogen into lactic acid when the oxygen supply is insufficient, are basically similar in slaughtered animal also
• After slaughter, during anaerobic glycolysis in normal animals (not in the animals that are exhausted, excited or excessively exercised just prior to slaughter), the glycogen reserve of the muscle decreases appreciably resulting in the lactic acid production which will proceed to a pH level at which the enzymes involved in glycolysis become inactivated
• In classic mammalian muscles this pH will be near to 5.4–5.5 (called Ultimate pH)
• Muscle having almost 600 mg glycogen/100 g muscle at the time of slaughter will reach this pH
• A protein called glycogenin is responsible for starting the glycogenesis (glycogen synthesis) in muscle and it binds with eight glucose molecules to produce a glycosyl-protein (Fig. 12.1)
• Glycosyl-protein is used as primer by the enzyme proglycogen synthase and thus, proglycogen is formed
• This proglycogen is converted into bigger macromolecule by the macroglycogen synthase and its branching enzyme

1. INTRODUCTION

Fruits and Vegetables are heighly perishable crops and have to be handled carefully after harvest. Postharvest handling of these perishables is essential to prevent the post harvest losses and maintain the quality of the fruits and vegetables. Various treatments (chemical, physical and biological agents) have been standardised and used for retaining the storage quality of different horticultural commodities. All these aspects have been discussed in this chapter.

1. INTRODUCTION

In the changing global scenario, food nutrition, health care and livelihood security are the matter of great concern to human, social and economic development. Fruits and vegetables is one of the most important and fast growing sub-sectors as they form an indispensable part of healthy diet. The current trend shows that dietary habits are changing with increasing income, from cereal based diet to nutritious diet. Resultantly, there is a growing demand for horticultural produce.

World production of vegetables amounts to 1169.45 million tonnes, while that of fruits is 689.39 million tonnes (NHB, 2017). India is the second major producer of fruits and vegetables in the world and ranks next to China. India produces 92.85 million tonnes of fruits from an area of 6.5 million hectares and 175.00 millions tonns of vegetables from an area of 9.2 million hectares annually. The productivity of vegetables in India is 17.6 tonnes per hectare. Potato (28.9%), tomato (11.3%), onion (10.3%) and brinjal (8.1%) are the 4 major vegetables contributing 58.6% of total vegetable production in our country. Other important vegetables are cabbage (5.4%), cauliflower (4.6%), okra (3.9%) and peas (2.4%)

1. INTRODUCTION

India produces a large variety of fruits and vegetable due to varied agro-climatic conditions. These include mango, citrus, banana, apple grapes, strawberry, pineapple, litchi, guava, papaya, plum, peach, pear apricot etc. Astonishingly, it may appear but it is a fact that postharvest losses of fruits and vegetables in India are staggering. Infact the postharvest losses of fruits and vegetables are equivalent to the annual consumption of fruits and vegetables in U.K. In this article, a focus is made on the causes of postharvest losses of fruits, overview of various techniques used to prevent the postharvest losses constrains in postharvest technology and future strategies.

Abstract

Starch is a naturally occurring biodegradable polymer and readily available from agriculture. It is widely used in food and non-food applications and isolated from crops such as maize, potatoes, tapioca, rice and wheat. However, in recent years substantial progress has been made on the molecular structure of cereal and tuber starches and their impact on functionality, the following is a subjective summary that presents status of knowledge on isolation of starch from non-conventional source like Acorus calamus (sweet flag). The focus is on potential application of the source as food and non-food derivatives. Extensive work has been carried out on agronomic and phenotypic properties for most tropical crops, but relatively little study has been carried out on the properties which are of direct technical and economic interest to competitive food and non-food industry. Sweet flag (Acorus calamus L.) is an emergent macrophyte, originating in Asia, commonly found in European wetlands. Rhizome is the most important storage organ in Acorus. It contains considerable amounts of carbohydrates and nitrogen-rich compound. This species is growing to 6 feet, with long lanceolate leaves %-inch wide with pronounced midrib, aromatic, with stout rhizomes. The major proportion of total non-structural carbohydrates in rhizomes is starch (91-93% and 51-64% in rhizomes and roots, respectively). However, amount of starch varies among the organs as well. Rhizomes contain the highest amount of starch followed by branched roots and finally by unbranched roots. Rhizomes comprises single to compound grains, with clusters present in high frequencies. Non-conventional food resources and their value addition have attracted attention in the recent years for their potential use as functional ingredients in food formulations, besides food they have also been used for non-food applications. So there is tremendous potential for the profitable commercial use of these tropical starches and exploring them for further use.

Abstract

The production of natural food colours through bio-processing is preferred now-a-days due to health related issues associated with their synthetic counterparts. Microorganisms are generally preferred sources as these have high production rate, high growth rate, ease of handling under controlled conditions and absence of seasonal variations. Biopigments can be produced from different genera of bacteria, yeast and mold. Different types and colours of pigments have been produced from microorganisms depending upon their origin, media components and process conditions. The biopigments have variety of applications in food industry such as food additives, food preservatives, biological control agents and nutritional supplements. These have also been associated with therapeutic, and antioxidant properties. Lycopene from B. trispora is used as a food ingredient in dietary supplement. Astaxanthin from X. dendrortious has also been reported to have beneficial effect on human health as it possesses strong antioxidant properties. Arpink red P. oxalicum is used as red colorant in meat products, non-alcoholic drinks, milk products and confectionary. 0- carotene is considered as leading food colorant in world and is applied to range of baked, dairy and canned foods to improve their appearance. The antioxidant andprecursory properties of0-carotene increase its applications in pet foods. Zeaxanthin is used as additives in poultry fed to intensify the colour of the egg yolk. Monascus pigments are utilized for coloration of sausages, ham, marine products and tomato ketchup. Monascus extract is also marketed as dietetic supplement in Japan. Thus, the biopigments can serve as a chromophore for colorant production with broad spectrum of colours and wide applications.

Introduction

The purpose of this e-book is to outline the main hazards in food production and processing that could influence the safety of foods and thus the health and wellbeing of consumers. The suggestive actions to restrain the formation of compounds or organisms that may threaten the safety of a food will be discussed along with the legal and regulatory framework.

“Safe Food Now for a Healthy Tomorrow”

Food is the third most basic human need, after air and water. Only when food is safe can it contribute to our food security and health. When food is not safe, people cannot thrive, hunger and poverty cannot be alleviated, and a healthy life is not possible. Food safety has a significant impact on human health, and food, which is essential for human survival, comes from plants and animals. Food safety is a core tenet of One Health.

This chapter gives an overview of the main hazards such as physical hazards, chemical hazards, biological hazards, and adulterants in different types of foods and how the hazards influence the safety of the food along with health and well-being of the consumers. The effective way of management of these hazards and different hazard limits set by the regulators such as FSSAI, USFDA, EU AND CODEX along with labelling requirements for the hazards has been discussed in this chapter.

Introduction

The horticulture sector is contributing over 30 per cent share in agricultural GDP of the country. Presently, India producing about 351.92 million tons of horticultural produce from 28.04 million hectare which has surpassed the food grain production for last five consecutive years (Anonymous, 2023). Horticulture sector has been identified by Government of India also identified horticulture as one of the vital sector for entrepreneurship development, employment generation, livelihood and nutritional security, doubling farmer’s income, achieving SDGs of the United Nations.

Fruits and vegetables have become part of a modern healthy lifestyle as they possess high amounts of minerals, especially electrolytes, dietary fiber, phytochemicals, especially antioxidants, and vitamins (Yahia et al., 2019; Krishnan Kesavan et al., 2023). In consumption, the qualities of products play a critical role in consumers’ choices, which are directly related to health problems (Tian, and Xu, 2022). Bioactive compounds are phytochemical substances present in small quantities in plant materials that can provide biological activity, being generally associated with health benefits, including hepatoprotective, anti-inflammatory, antioxidant, antithrombotic, anticarcinogenic, antidiabetic and prevention of cardiovascular and degenerative diseases (Campoli et al., 2018). Therefore, maintaining high-quality fruits and vegetables is very important for the fruit and vegetable industry. This requires some methods to evaluate the quality of fresh fruits and vegetables during their post-harvest manipulation and storage and before their industrial processing as well (Tian and Xu, 2022).

Poultry meat-50 g for each method
Cook the poultry meat according to the methods given in the table and record the cooking effects

Practical case studies provide a direct connection between technical knowledge and the real-world challenges faced by ice cream manufacturers and managers. This chapter brings together applied situations involving formulation, overrun, texture, freezing, storage, cold-chain management, production losses, changeovers, product launches, market returns, profitability, and operational decision-making. Each case encourages readers to identify symptoms, determine probable causes, evaluate technical and commercial consequences, and develop corrective actions. The cases demonstrate that ice cream performance depends on the interaction of formulation, processing, quality, equipment, distribution, consumer expectations, and business strategy. The chapter is particularly valuable for students, technologists, entrepreneurs, managers, consultants, and industry professionals seeking practical problem-solving skills.

1. EXPERIMENT 1 : INDUSTRIAL USES OF IMPORTANT CHEMICALS