eChapters

Milk, as secreted in the udder of a healthy animal is practically sterile, but during its transit to the processing plant, becomes heavily contaminated with a variety of micro-organisms. These may be responsible for spoilage of milk or for causing diseases in animals and human beings. It thus becomes imperative that adequate heat treatment is given to milk to destroy these micro-organisms, thus increasing the shelf-life of milk as well as making it safe. Varied heat treatments offer the potential of producing different kinds of processed milk to satisfy the needs of the consumer. To cater to the ever-increasing demand of consumers, several varieties of processed milk are available in the market, some of which are discussed below.

5.1. Pasteurised Milk

Pasteurisation was named after the renowned French scientist Louis Pasteur, who discovered that spoilage organisms could be inactivated in wine by applying heat at temperatures below its boiling point. The process was later applied to milk and remains the most important operation in the processing of milk.

It is the process by which every particle of milk is heated to such temperature-time combinations (usually to 63°C for not less than 30 minutes or to 72°C for not less than 15 seconds) and promptly cooled to 4°C or below so as to destroy any harmful bacteria that may be present without affecting flavour and food value. Pasteurisation does not involve the use of any additives. Apart from making milk safe to drink, pasteurisation increases the length of time it can be kept before it spoils. The nutrient losses due to pasteurisation are so small, that they are considered insignificant.

1. INTRODUCTION

Proteins are polymers of amino acids. Twenty different types of amino acids occur naturally in proteins. Proteins differ from each other according to the type, number and sequence of amino acids that make up the polypeptide backbone. Proteins are the important constituents of foods for a number of reasons. They are a major source of energy, as well as containing essential amino-acids, like lysine, tryptophan, methionine, leucine, isoleucine and valine which are essential to human health, but which the body cannot synthesize. Proteins are also the major structural components of many natural foods, often determining their overall texture, e.g., tenderness of meat or fish products. Isolated proteins are often used in foods as ingredients because of their unique functional properties, i.e., their ability to provide desirable appearance, texture or stability.

Proteins are complex organic molecules made up of carbon, hydrogen, oxygen, and nitrogen. Most proteins also contain sulphur and phosphorus and also play an important role in food preparation. The final quality of many food products are influenced by how the proteins are treated while food is being prepared.

F- distribution : A probability density function that is used in analysis of variance and is a function of the ratio of two independent random variables each of which has a chi-square distribution and is divided by its number of degrees of freedom.

F₀ value : It is used to express F-value when z =10^ºC/18^ºF and the temperature is 121.1^ºC. It is the number of minutes at a specific temperature (250^ºC) required to destroy or kill a stated number of microorganisms and has specific z-value. It is also called reference value. 

All bread is made by baking a dough that has two basic ingredients, flour or meal and a liquid. Bakers can use a wide variety of both components. The most common type of flour used for bread and most other baked goods is made from wheat. Wheat flour has a pleasant taste and contains a large amount of an elastic protein substance called gluten. Gluten aids in baking uniformly light bread that rises (swells) properly. Other baking flours are made from barley, rye, corn, rice, oats, soybeans, and potatoes. These flours, particularly soybean flour, may equal wheat nutritionally, but none can match wheat for creating light, even-textured bread. Hard wheat flour makes lighter bread than does soft wheat flour because it is richer in gluten. Rye and whole wheat breads are made lighter by adding white flour. The liquids used in baking include water, sweet or sour milk, yogurt, wine, and beer.

Bread is either leavened or unleavened. Leavened breads contain some substance that produces bubbles of carbon-dioxide gas. These gas bubbles inflate the dough, causing it to rise and become light and porous. Most kinds of basic breads are leavened with a fungus called yeast. Biscuits, muffins, and cakes and other pastries are leavened with either baking powder or baking soda. Unleavened bread is dry and hard. Familiar kinds of unleavened breads include water crackers, the rye crisp of Sweden, and Jewish matzoth. Whether leavened or unleavened, most breads contain other ingredients in addition to flour and a liquid. An almost limitless variety of breads can be made by adding a sweetener, shortening, cheese, eggs, meat, fruit, vegetables, seeds, or nuts. A sweetener, either sugar or syrup, is used in almost all bread for its taste or as an aid to yeast growth. Bread may also have an external sweetener in the form of a decorative glaze. The high fat content of shortening and cheese increase tenderness and flakiness in bread. Perhaps the best example is the French croissant. Eggs help leaven bread dough by adding to the bread’s lightness. They can be brushed on top of the dough before baking to create a shiny crust, as in the Jewish hallah. Some breads from many nations contain fruit, a vegetable, meat, seeds, or nuts. Examples include the fruit scone of Great Britain, the spinach paratha of India, the Southern sausage bread of the United States, the Easter sesame bread of Greece, and the almond sweet bread of Finland.

Introduction

Food is a culture, emotion, hospitality and prestige which is closely knitted with tradition. Traditional knowledge is a community based functional knowledge system which is developed, preserved and refined by generations through continuous interaction, observation and experimentation with their surrounding environment. It includes beliefs, values, and practices gathered from the practical experience of older generation, and its whole function is survival and development of culture of people. Traditional foods, originated from ancestral kitchens are developed through ages, invented, modified, utilised and evolved to improve nutritional and social wellbeing of the people around the world. Most of them are culture specific, region specific, environment specific, community specific and season specific. These foods are socially, culturally and economically important and provide food security, enhance livelihood and improve nutritional and social wellbeing of people. Food culture arises out of the place of a people’s origin and so traditional local foods hold the potential to bind and stabilise communities and enable a cultural continuity through conserving their histories. Indian cuisine is represented as a wide spectrum of food cultures with distinctive regional differences and preferences (Achaya, 1998).

6.1. Introduction

Food packaging has a significant contribution in preserving the quality of the food throughout the processing and storage. The package containing food should maintain the quality of the product for the longest time under particular environmental conditions. The quality of various food and beverages decline with the passage of time and food become unacceptable to consume. The time in which food deteriorates and become unacceptable is termed as shelf-life. The degradation of quality with time under storage conditions depends upon intrinsic as well as extrinsic factors. The shelf-life study of a product provides important information to manufacturer and consumer regarding the quality of the food product throughout the storage time.

11.1. Introduction

Food packaging is the integral part of the food industry. Packaging may be defined as the enclosure of products, items or packages in a wrapped pouch, bag, box, cup, tray, can, tube, bottle or other container form to perform one or more of the following functions: containment, protection, preservation, communication, utility and performance. If the device or container performs one or more of these functions, it is considered a package. The major roles of the packaging of food are the containment and preservation of foods by protecting the food from physical, chemical and microbial spoilage. Besides, packaging performs some other functions like communication which means giving the information about the product, transportation of the food production and so on. Food products are classified as perishable, semi- perishable and non-perishable food based on the spoilage. Selecting appropriate packaging material and packaging technique for various food products like meat and poultry, fruits and vegetables, milk and milk products, bakery and confectionery and beverages is essential to maintain the quality of food product. Selection of the ideal packaging material for specific food requires prior knowledge about the packaging materials and its properties, type of the food products and specific spoilage mechanism of the particular food. Above all, from economical point of view, packaging material cost and capital for the establishment of the packaging technique also plays crucial role in selection of a particular packaging material or technique. 

Millets categorized as cereal crops are rich sources of nutrients, mostly cultivated across arid and semiarid areas of the world, specifically in southeast Asia and Africa. Millets are easy to cultivate, demands minimal field input and have appreciable market values. Despite of great value of millets, their production is limited mainly because of climate change which triggers multiple abiotic stresses like drought, high temperature, salinity, etc. Even though millets can withstand the majority of abiotic stresses, it necessitates their further improvement to develop more resilience against unprecedented effects of climate change by incorporating or enhancing stress tolerance characteristics. It is currently not attainable to create stress tolerant and high yielding varieties through conventional breeding techniques and thus modern approaches like genome editing become inevitable to achieve this goal. Also, available data for genome sequences of millets in these years promotes genome editing. The technique has drawn tremendous attention recently due to its potential in precise modification of alleles and is considerable to speed-up crop breeding by targeting important traits with precision. Additionally, many stress-resistant genes are identified in related monocots and are reported to be orthologs of millets which could assist genome editing for developing stress resilience and productivity in millets. Above all, the technique has also gained legal acceptance and has potential to revolutionary counter climatic challenges.

Introduction

The COVID 19 pandemic is threatening food systems and international food security. According to the World Food Programme (WFP), that says the amount of individuals facing crisis hunger is anticipated to virtually double this year to 265 million. Already, quite 820 million individuals don’t get enough food to eat, and another a hundred thirty five million individuals face acute hunger or starvation. Increase that, the economic destabilization caused by COVID-19, and another a hundred thirty million people are in danger of starvation by the top of 2020, says WFP. The quickness with that a health crisis transforms in an exceedingly hunger crisis shows however fragile is our food systems to shocks of any nature.

Millets are the staple food cropsacross the globe. The ability to thrive in harsh conditions established them as most suitable for current climate adversaries. The nutritional richness of millet reminded the need for adding them to our food basket.Despite possessing several desirable traits their cultivation is limited to a few pockets across the globe.Though significant progress has been achieved by conventional and transgenic breeding programs inmillets, there is a need for rapid improvement to meet the current needs.In order to accelerate the pace of breeding efforts, several molecular biology and biotechnology tools are being deployed by plant breeders. In the meantime, genome editing techniques like CRISPR, TALENS, ZFNs, Base and Prime editing have revolutionized the methods of genome engineering among which CRISPR has emerged as the most rapid, convenient and effective mechanism. The availability ofwhole genome sequence information, identified candidate genesfor various traits and successful transformation methods of millets promoted the application of CRISPR and resulted in the improvement of several traits. Initially, its application has been limited due to the restricted policies across the globe but the gradual change in the policies promoted genome editing across several parts of the globe. Thus, the application of genome editing for millet crop improvement can bring back those ancient grains to our food basket.

Introduction

Nutritional value of food stuff is defined by its ability to provide nutrients required by the body. Proteins, carbohydrates, fats, minerals and vitamins are main ingredients in food stuffs. Wheat is an important source of these nutrients. The distribution of nutrients within wheat kernel is typical of many cereals. Nutrients are generally found in the highest concentrations in the germ or embryo and in the aleurone cells surrounding the starchy endosperm followed by bran, whole wheat flour and white flour in decreasing order. Of special importance is that it contains the entire B complex, except for vitamin B12. B vitamins function as cofactors in many metabolic reactions involved in the release of energy. The germ, which includes the scutellum, is especially rich in vitamins B and E, high quality protein, unsaturated fats, minerals, and carbohydrates. The bran consists mostly of the insoluble carbohydrate cellulose, and contains incomplete protein, traces of B vitamins, and minerals including zinc and iron. The endosperm is the largest part of the grain, and consists mostly of the carbohydrate starch, incomplete protein, and trace amounts of vitamins and minerals. Significant variations in the content of grains occur because of variety, crop year, area, fertilizer, and soil type.

Abstract

Food lost during the production chain is referred to as postharvest loss. Reducing postharvest loss can effectively feed starving mouths while conserving resources and decreasing the pressure to produce more. There are five main areas where postharvest loss can be reduced – harvest, storage, transportation, processing, and retail. New approaches and technologies in each of these areas will increase the amount of food available for human consumption. The total loss due to poor post- harvest processing of agricultural products in India when valued in terms of monetary reflects a tremendous loss in the economy. Annual value of harvest and post-harvest losses of major agricultural produces at national level to be of the order of Rs. 92,651 Crore calculated using production data of 2012-13 at 2014 wholesale prices. Deficits in food items or financial loss should not have occurred if postharvest losses were reduced through proper processing and preservation from harvest to consumption. Both the government and private sector need to invest in research so as to improve and modernize post-harvest facilities for attaining more efficient market infrastructure and distribution channels. Research and extension activities have to be closely coordinated particularly in the public sector for the benefit of farmers, traders and consumers.

Abstract

Micronutrient (vitamin and mineral) deficiencies affect more than 2 billion people worldwide and are especially prevalent in developing countries including India. Conditions due to vitamin mineral deficiencies account for 7.3 percent of the global disease burden.Iron deficiency (anemia), vitamin A and iodine deficiency disorders continue to be a grim public health problem. Thus, elimination of vitamin and mineral deficiencies is essential to improve the overall health of the masses as well as to sustain economic growth and national development. Food fortification is an effective intervention to deliver vitamin and mineral rich foods to large populations. In addition to the prevention of vitamin and mineral deficiencies, food fortification is an effective measure to raise vitamin and mineral levels by moving the population towards consuming recommended dietary allowances for most micronutrients-making it a long–term and a sustainable strategy. India is the largest producer of milk in the world with 146.3 million tonnes and the consumption rate of milk and milk products by all age groups of people are high.Therefore, fortification of milk with mineral and vitamins could be a safe and effective strategy to fight these micronutrient deficiencies.

An ice cream plant is a highly interconnected operation in which quality, food safety, productivity, maintenance, cost, cold-chain performance, and business results influence one another. This chapter presents plant audits as management tools rather than simple compliance exercises. It provides a structured monthly audit system covering raw materials, production, quality assurance, hygiene, maintenance, productivity, cost control, warehouse operations, cold chain, documentation, and KPI performance. Department-wise scoring enables management to compare performance, identify weaknesses, prioritize corrective actions, and track improvement. The chapter also discusses common audit mistakes and best practices. A disciplined audit system strengthens accountability, reduces losses, improves operational control, and supports continuous improvement.

Shelf life is a critical measure of ice cream quality and depends on formulation, processing, hardening, packaging, storage, and distribution conditions. This chapter explains the concept of shelf life and follows the movement of ice cream through the storage and distribution chain. It identifies temperature fluctuation and thermal abuse as major causes of quality deterioration, particularly through ice recrystallization and structural damage. The chapter examines hardening, formulation stability, cold-chain controls, shelf-life KPIs, and formal shelf-life studies. Common defects and their causes are also discussed. By understanding how temperature and handling influence product stability over time, manufacturers can establish better controls and protect texture, flavour, appearance, packaging integrity, and consumer acceptance.

Twenty first century is the century of entrepreneurship and every individual can be an agent for innovation and change. Entrepreneurship is regarded as one of the most crucial factors in the economic development of every region of the country. It widens the horizons of economic development even in the socially and industrially backward regions. Dynamic entrepreneurs are considered to be the agent of change in a society. Entrepreneurs play a very important role in generating new employment and setting up new business. The problem of poverty, inequality and regional imbalances can be tackled with the development of entrepreneurship. However, in all economic development activities more and more focus is being centered on entrepreneurship of the people. Entrepreneur has been now recognized as a concept, not only for starting industries but also in the development of dairy enterprise. In India, it is believed that tremendous latent entrepreneurial talent exists which, if properly harnessed, could help in solving many of the serious problems facing the country.

Introduction
Fruits and vegetables are an important part of the human diet as they provide the necessary nutrition, essential minerals, vitamins, antioxidants, dietary fiber, etc., required for maintaining proper health. India is the second largest producer of fruits and vegetables in the world after China. Comparison of area under horticultural crops during 2011-12 and 2021-22 indicate substantial improvement from 18.5 million ha to 27.6 million ha with a simultaneous increase in production from 215.04 million MT to about 333.25 million MT respectively in the country within a span of just one decade (Table 1.1). The credit for this spectacular growth in area and production goes to the sustained efforts of the central and state governments for the launch of several farmers’/ growers’ welfare schemes viz., National Horticulture Mission (NHM), Horticulture Mission for Northeast and Himalayan states (HMNEH), Mission for Integrated Development of Horticulture (MIDH); R&D support by the ICAR and State Agriculture & Horticulture Universities, extension agencies/Krishi Vigyan Kendra and proactive farmers and orchardists. However, the increase in production has still not kept pace with the improvement in infrastructure for post-harvest handling, management, processing, and value addition. Various studies still indicate that under normal conditions more than 15-20% of the produce goes to waste from production to consumption which in monetar terms accounts for huge economic losses. A recent study sponsored by the Ministry of Food Processing Industries Government of India and conducted by NABARD Consultancy Services has indicated that about 19.33 million MT worth Rs 58013.71 Crores of fruit & vegetables goes to waste annually as postharvest loss (4.87-15.05%) in various channels from harvesting to consumption (NABCONS,2022). The condition becomes even worse when there is a glut in the market, road blockades, or seasonal vagaries, and farmers are forced to leave their produce in the field itself without harvesting or dispose it at throwaway prices. Such a situation can, however, be controlled by diverting thisproduce to processing for conversion into a number of value-added products for its later use in human consumption. Thus, processing and preservation of horticultural crops have now become a necessity rather than a luxury.

Digitalization is transforming ice cream operations by connecting procurement, production, quality, cold chain, sales, distribution, finance, and management through integrated information systems. This chapter examines the transition from traditional manual operations to ERP-, AI-, IoT-, and data-driven management. It explains the costs of limited digitalization and the department-wise benefits of integrated systems, including better traceability, demand forecasting, inventory management, energy monitoring, cold-chain control, predictive maintenance, and profitability analysis. The chapter also explores artificial intelligence, business intelligence, IoT monitoring, and evidence from industry research. It emphasizes that technology alone is insufficient: standardized processes, accurate master data, user training, governance, and management discipline are essential for achieving measurable digital transformation.

1.1 Introduction
Concentrated milks, like evaporated milk and sweetened condensed milk, serve as practical substitutes for fresh milk in regions where access to it is limited or where transportation and storage are challenging. These products go through specific processing techniques to reduce their water content, thereby improving their shelf life and transportability. Evaporated milk is created by removing water through evaporation and then
sterilizing it to prevent microbial growth. This process results in a thicker consistency and a slightly caramelized flavor due to the heat treatment. On the other hand, sweetened condensed milk is made by adding a significant amount of sucrose to the milk and excluding oxygen, which inhibits microbial growth. This results in a thick, sweet product suitable for various culinary uses. These concentrated milk products are usually packaged in small cans, making them convenient for storage and transportation. However, they are sometimes diluted before consumption with water to resemble the taste and consistency of fresh milk. In regions where even concentrated milks are not easily accessible, alternatives like whole milk powder or recombined milk are used. These alternatives involve dehydrating milk into powder form or reconstituting milk components to create a liquid similar to fresh milk. Innovations in processing and packaging have led to the development of alternative uses for concentrated milks, expanding their versatility beyond traditional applications. These products continue to provide essential dairy
nutrition in areas where fresh milk is scarce or hard to obtain, offering a shelfstable solution to meet dietary needs.

Introduction
Freezing is one of the oldest and most widely used methods of food preservation, which allows the preservation of taste, texture, and nutritional quality in foods better than any other methods. The freezing process is a combination of the beneficial effects of low temperatures at which micro-organisms cannot grow, chemical reactions are reduced, and cellular metabolic reactions are delayed. Freezing is generally referred to as a unit operation in which the temperature of food is reduced below the freezing point and a proportion of water undergoes a change in state to form ice crystals. Immobilization of water to ice and the resulting concentration of dissolved solutes in unfrozen water cause a lowering of water activity of the food. Thus, reduction in water activity and use of low temperatures coupled with some pre-treatments like blanching is the basis for food preservation by freezing. Fruits such as strawberries, oranges, raspberries, black currants, and vegetables like green peas, green beans, sweet corn, spinach, carrots, sprouts, and potatoes are examples of commercially frozen fruits and vegetables.
The frozen food market is one of the largest and most dynamic sectors o the food industry. Despite considerable competition between the frozen food industry and other sectors, large quantities of frozen foods are being consumed all over the world. The frozen vegetable industry mostly grew after the development of scientific methods for blanching and processing in the 1940s. The commercialization history of frozen fruits is older than frozen vegetables. The commercial freezing of small fruits and berries began in the eastern part ofthe United States in about 1905.