eChapters

1. Introduction

Citrus is a common term and genus (Citrus) of flowering plants in the Rue family, Rutaceae. Citrus fruits are non-climacteric and respiration slowly declines and the production and release of ethylene is gradual. India ranks sixth in the production of citrus fruits in the world. Citrus wastes typically are about 45- 50% of the weight of citrus original and the percentage of waste to 30-50% for vegetables and fruits in general. Natural colour plays a significant role in determining the degree of consumer acceptance of the product. In addition, carotenoids (vitamin A precursor) have high nutritional values which are important for human nutrition.Francis and Isaksen (1988) stated that carotenoids play a very important role for extraction as for protection of health against cancer, cardiovascular and eye disease and as anti-oxidant. Carotenoids play important roles in human nutrition through their provitamin A activity, but also by acting as antioxidants, for prevention of age-related macular degeneration or skin protection against UV radiation. The antioxidant capacity of carotenoids was proved for pure compounds as well as for plant extracts and food. The main objective of this research work is extraction, determination and identification of natural colorants from different citrus wastes (citrus peel). Also to study the effects of pH and oxygen on the stability of extracted pigments and determination of the specific carriers for the extracted pigments using solid matrices (starch, dextrin, arabic gum and flour).

1. Introduction

The emergence of food borne illness due to contaminated food is one of the most frequently occurring event and challenge for the food processing industry. This has resulted into economy as well as energy requirement to counter the food borne pathogens. Some of the important pathogenic microorganisms of concern are E. coli, Listeria monocytogenes, salmonella, etc. To address the food safety and quality issues, several non-thermal food processing technologies have been developed in the last decades, with an aim of achieving food safety without significantly affecting the quality of the food product. Cold plasma in one of the non-thermal processing technology, which has shown promising results as evidenced by recent scientific investigations.

The plasma is known as fourth state of matter after solid, liquid and gas state. Plasma contains diversity of energetic species including ions, electrons, atoms, excited molecules and charged particles. In a plasma, a significant number of electrons have such a high energy that no nucleus can hold them. When a gas is subjected to heat or an electric field, some of the atoms become ions and the gas is said to be ionized. An ionized gas in its normal condition, can conduct electric current to a limited extent. If the heat or electric current becomes extreme, many of the atoms become ions. The resulting super ionized gas, which can conduct a large and sustained electric charge. Plasmas are used in several materials processing industries like textiles, electronics, paper and glass industries etc.

    1.    Rice is a
        a)    Edible fruit    b)    Edible Vegetable
        c)    Edible flower    d)    All
    2.    Major components in cereal seeds are 
        a)    Endosperm    b)    Germ or embryo
        c)    a & b    d)    None
    3.    Bran is composed of 
        a)    Pericarp    b)    Testa
        c)    aleuron layer    d)    All
    4.    Oats contains ______________ percent of hull
        a)    50    b)    40
        c)    30    d)    20

Introduction

Canning is the general term applied to the process of packaging a food in a container and subjecting it to a thermal process for the purpose of extending its useful life. An optimal thermal process will destroy pathogenic (disease-causing) Bacteria, kill or control spoilage organism present and have mineral impact on the nutritional and physical quality of the food. Although we thing of canning in term of steel or possible aluminium cans, the principle apply equally well to a variety of food containers such as glass jar, plastic and foil laminated pouches, semi rigid plastic tray or bowls, as well as metal cans of any one of several shapes, including cylindrical, oval, oblong or rectangular. The concept of aseptic packaging (sterilizing the food and the container prior to filling and sealing) also follows the same principles.

Abstract

Being a great nutrient rich fruit, Dragon fruit has fetched a worldwide attention already and started to emerge as an important cash crop in global market. But the fine tuning between the scheduling of supply and market demand is greatly influenced by postharvest management and storage techniques of the fruit as the fruit has a short storage life. In this review, effect of diversified storage and packaging techniques on the different post harvest quality of fruits viz. fruit firmness, skin colour, its nutritional quality and susceptibility to disease pest during storage is investigated. And it was seen that various alternative and innovative modern techniques such as introduction of  plastic film, plastic crate packaging, modified atmospheric storage, different chemical application and application of edible chitosan coating are proven as effective to extent the durability of storage that widen the room for transport and marketing. Finally it can be said that the advantage of growth in dragon fruit consumption and marketing can be more harnessed through understanding the missing links between harvest and post-harvest handlings and integrating the traditional and modern postharvest approaches.

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

Introduction

Packaging is the science, art and technology of enclosing or protecting products for distribution, storage, sale, and use. Packaging also refers to the process of design, evaluation, and production of packages. Packaging may be defined as the art and science which involves preparing the articles for transport, storage display and use. India is a land of large varieties of fruits and vegetables due to its vast soil and climatic diversity. With 38 and 71 million tons of production of fruits and vegetables, India is the second largest producer of fruits and vegetables next to Brazil and China respectively. Apart from the huge value addition and employment involved in these activities, packaging has served the Indian economy by helping preservation of the quality and lengthening the shelf life of innumerable products-ranging from milk and biscuits, to drugs and medicines, processed and semi-processed foods, fruits and vegetables, edible oils, electronic goods etc., besides domestic appliances and industrial machinery and other hardware needing transportation (FAO, 1985).

Introduction

Fresh fruits and vegetables are known for their nutritional and relishing nature. But, their fast perishability and season wise availability make them unavailable for a longer time. To enjoy and get benefited from their unique taste and nutritional value they are further preserved or converted into some value-added products such as jam, jelly, candies, juices, minimally processed fresh-cut fruits and vegetables, pickles etc. There are techniques which are developed to preserve them while in fresh and also when they are made into value-added products. Some require only one technique and other requires more than one in combination so that the product can be preserved for a longer period and available to maximum population even after their period of production/availability is completed.

Ornamental Industry

Floriculture as a multi-billion dollar industry has been undergoing unique revolution in terms of production and marketing of high value ornamentals such as cut flowers, loose flowers, potted and foliage plants there by emerged as fully export oriented activity. Owing to the steady increase in demand of flowers, floriculture has become one of the important commercial businesses in horticulture. Presently, floriculture industry in India has been growing with compound annual growth rate of 25 percent over the past decade (Muthukumaran, 2009). It has been found that commercial floriculture has higher potential per unit area than most of the field crops and therefore, it is a lucrative business. Indian floriculture industry has been shifting from traditional flowers to cut flowers for export purposes.Maharashtra, Karnataka, Andhra Pradesh, Haryana, Tamilnadu, Rajasthan, West Bengal have emerged as major floriculture production areas. The export of floricultural products from India has been on an increase in the past five years due to high demand for floriculture products in importing countries. The estimated total area under floriculture in India is 2,82,000 ha. Tamil Nadu stands first followed by Karnataka and Andhra Pradesh, West Bengal, Maharashtra, Rajasthan, Delhi and Haryana. Approximately 16,57,000 metric tonnes of loose flowers and over 5,20,000 metric tonnes cut flowers are produced in India during 2015-16. Total export of floriculture products is 22,518 MT with value of 479 crores (APEDA, 2015). Major importers of ornamental products from India are USA, Germany, UK, Netherland, and UAE.

Introduction

Horticulture plays a significant role in Indian Agriculture. It contributes 30% GDP from 11.73 % of its arable land area. India is the second largest producer of both fruits and vegetables in the world (52.85 Mt and 108.20 Mt respectively). Being rich source of carbohydrates, minerals, vitamins and dietary fibres these constitute an important part of our daily diet. The dietary fibres have several direct and indirect advantages. Not only this, fruits and vegetables provide a variety in taste, interest and aesthetic appeal. Their significance in human life is being recognised increasingly in societies with the objective of minimizing the occurrence of the diseases related with an affluent life style.

Key facts
        
Agriculture and livestock
    
·    The Intergovernmental Panel on Climate Change (IPCC) defines adaptation as ‘adjustment in natural or human systems in response to actual or expected climatic stimuli or their effects, which moderates harm or exploits beneficial opportunities’. The adaptation can be considered as tackling the effects of climate change, whereas mitigation is tackling the cause of climate change such as reducing the sources or enhancing the sinks of greenhouse gases. There could be different types of adaptation such as autonomous (spontaneous) and planned adaptation (policy decision).
    
·    Autonomous adaptation includes altering varieties and/or species those are more appropriate to the altered thermal regime or with increased resistance to heat shock and drought; altering the timing or location of cropping activities; altering fertilizer rates to maintain grain or fruit quality consistent with the climate and altering amounts and timing of irrigation and other water management practices; diversifying income by integrating other farming activities such as livestock raising, integrated agriculture and aquaculture/fish farming; development and use of varieties and species resistant to pests and diseases, wider use of technologies to ‘harvest’ water, conserve soil moisture (e.g. crop residue retention) and to use water more effectively in areas where rainfall is projected to decrease and using seasonal climate forecasting to reduce production risk.

Key facts
    
·    The Food and Agriculture Organization (FAO) defines food security as a ’situation that exists when all people, at all times, have physical, social and economic access to sufficient, safe and nutritious food that meets their dietary needs and food preferences for an active and healthy life’. There are four dimensions of food security: Food Availability (availability of sufficient food for all people at all times, i.e. production); Food Accessibility (physical and economic access to food at all times, i.e. affordability), Food Utilization (access to food that is nutritious, safe and produced in environmentally sustainable ways, i.e. nutrients in food and food safety); and Food Stability (reliability of adequate food supply).
    
·    Agriculture is important for food security since it provides food for the people and is the primary source of livelihood for 36% of the world’s total workforce. In the heavily populated countries such as Asia and the Pacific, about 40% to 50%, and in sub-Saharan Africa, about two-thirds of the working population make their living from agriculture.
    
·    Agriculture, livestock and fisheries production are all sensitive to climate and are affected by its changes. Climate change will increase hunger and malnutrition, emergence of new pests and diseases and will threaten fishing and aquaculture industries.

Key Facts
        
Agricultural food
    
·    There are multiple pathways through which climate-related factors may impact food contamination and food safety, food quality, foodborne diseases including changes in temperature and precipitation patterns, increased frequency and intensity of extreme weather events, ocean warming and acidification and changes in the transport pathways of complex contaminants.
    
·    All or most foodborne pathogens and their associated diseases are linked to changing environmental conditions, the notable of which are campylobacteriosis, salmonellosis and vibriosis.
    
·    An estimated 30% of reported cases of salmonellosis across much of continental Europe have been attributed to warm temperatures, especially when they exceed a threshold of 6°C above average. Likewise both in Australia and Canada a positive correlation was found between increasing temperature and incidence of salmonellosis.
    
·    Zoonosis such as Rift Valley Fever (RVF), West Nile Fever, tick-borne diseases and non-zoonotic animal diseases such as Blue tongue, African horse sickness, African swine fever are examples of animal diseases whose distribution is expected to be strongly influenced by climate change and variability.
    
·    Mycotoxin is a toxic secondary metabolite produced by filamentous fungi, commonly known as moulds and may contaminate agricultural commodities (food) by growing on them both before and after harvest, whenever the humidity and temperature are permissive. The most prominent mycotoxins are aflatoxins, deoxynivalenol, zearalenone, ochratoxin-A, fumonisin, and patulin.
    
·    The humans ingestion of mycotoxins occur through consumption of the mycotoxin contaminated plant-based foods, such as grains, maize, barley, rice, coffee, nuts and their residues, and metabolites in animal-derived foods, for example aflatoxin M1 (AFM1) in milk and meat products. In addition, mycotoxins may occur in beer and wine.

Key facts

Agriculture
    
·    Agriculture production (plant growth) is highly dependent on climate since crop growth is influenced by solar radiation, temperature and precipitation and sensitive to climate variability and weather extremes (droughts, floods, severe storms).
    
·    Climate change is projected to have an effect on local agriculture and the net result could be harmful (e.g. frequent droughts, salinization of agriculture land due to sea level rise) or beneficial, (e.g. enhance CO₂ and higher yield, longer growing season, increased precipitation) or mixed.
    
·    Climate change or a doubling of GHGs (2 x CO₂) is projected to cause both gains and losses of agriculture land.
    
·    Each crop has a specific temperature range at which vegetative and reproductive growth will proceed at the optimal rate and exposures to extreme temperatures during these phases can impact growth and yield. Higher temperatures during the reproductive stage of development can affect pollen viability, fertilization and grain or fruit formation. 
    
·    Warming generally allow plants to grow faster that are below their optimum temperature, however for cereal crops faster growth means there is less time for the grain itself to grow and mature, reducing yields. 
    
·    Night-time temperatures are rising faster than daytime temperatures and are expected to continue rise in the future. According to International Rice Research Institute (IRRI), Philippines, the rise of night time temperature decreases rice yield by 10% for each 1°C increase in growing-season night time temperature in the dry season.

Key Facts
    
·    The United Nations Framework Convention on Climate Change (UNFCCC) defines ‘climate change’ as a ‘Change of climate which is attributed directly or indirectly to human activity that alters the composition of the global atmosphere and which is in addition to natural climate variability observed over the comparable time periods’.
    
·    The main green house gases (GHGs) that have caused the global climate change or global warming are carbon dioxide (CO₂), methane (CH₄) and nitrous oxide (N₂O).
    
·    CO₂ is the principal anthropogenic GHG that affects the earth’s radiative balance. It is the reference gas against which other GHGs are measured and therefore has a Global Warming Potential (GWP) of 1. CH₄ and N₂O have a GWP of 21 and 310 respectively.
    
·    CO₂ is responsible for most of the enhanced green house effect of more than 50%, CH₄ for about 10-15% and N₂O for about 8%.
    
·    The global atmospheric concentrations of CO₂, CH₄ and N₂O have increased since 1750. While CO₂ increased from a pre-industrial value of 280 ppm to 379 ppm in 2005, CH₄ increased from 715 ppb to 1774 ppb and N₂O increased from 270 ppb to 319 ppb during the same period.

16.1    Banana Alcohol
    
16.2    Banana Pseudostem Fibre and Fibre Reinforced Products
    
16.3    Banana Pseudostem Juice
    
16.4    Banana Starch
    
16.5    Banana Waste for Mushroom Production
    
16.6    Paper and Pulp from Banana Waste
    
16.7    Vermicompost and Vermiwash from Banana Waste
    
16.8    Animal Feed from Banana Waste
    
16.9    Banana Leaf

15.1    Banana Chips/Crisps
    
15.2    Banana Puree/Pulp
    
15.3    Banana Flour
    
15.4    Banana Powder
    
15.5    Banana Flakes
    
15.6    Banana Figs or Dehydrated Banana
    
15.7    Banana Jam
    
15.8    Ready-To-Serve (Rts) Beverage
    
15.9    Banana Beer and Wine
    
15.10    Banana Vinegar
    
15.11    Banana Catsup
    
15.12    Banana Inflorescence Relish
    
15.13    Candied Banana
    
15.14    Other Banana Based Products

By definition, minimal processing would encompass any procedure, short of traditional complete preservation procedures (heat sterilization etc.) that adds value to the fruit or vegetables (Floros, 1993). Other terms used to refer minimally processed products are lightly processed, partially processed, fresh processed, fresh cut and prepared. Minimally processed fruits and vegetables are products those have the attributes of ‘fresh-like’ quality. A number of minimally processed products of fruits and vegetables are now being produced like peeled and sliced potatoes, shredded lettuce and cabbage, washed and trimmed spinach, chilled peach, mango, banana, melon and other fruit slices, vegetable snacks such as carrot and celery stick  and cauliflower and broccoli florets, packaged mixed salads, cleaned and diced onion, peeled and cored pineapple, fresh sauces, peeled citrus fruits and microwaveable fresh vegetable trays. Minimal processing of fruits and vegetables has two purposes. First, it is important to keep the product fresh but convenient without losing its nutritional quality. Second, the product should have a shelf life sufficient enough to facilitate distribution within the region of consumption. The microbiological, sensory and nutritional shelf life of minimally processed fruits and vegetables should be at least 4-7 days but preferably even longer (Ahvenainen, 2000).

13.1    Biochemical Changes During Banana Ripening
    
13.2    Commercial Ripening

12.1    Shelf Life
    
12.2    Pre-Treatments Vs. Shelf Life/Storage (Hot Water, Fungicides, Coatings and other Chemicals)
    
12.3    Surface Coatings
    
12.4    1-MCP Gas Exposure
    
12.5    Use of Botanicals
    
12.6    Other Chemicals/Methods
    
12.7    Evaporative Cool Storage
    
12.8    Modified Atmosphere Storage (MAS)
    
12.9    Controlled Atmosphere Storage (CAS)
    
12.10    Vacuum Packaging
    
12.11    Hypobaric Storage
    
12.12    Irradiation
    
12.13    Chilling Injury (CI)