eChapters

Introduction

Cocoa beans are extracted from the pod of a tree crop Theobroma cacao. It is mainly cultivated in tropical and subtropical countries. In terms of world production, Ivory Coast and Ghana contribute about 65 percent of world production. Cocoa beans are the main ingredient in chocolate. (Teye, E et al 2014). One of the earliest examples of chocolate consumption comes from the Mayans. The Maya drink was prepared with cocoa and water and often included cinnamon and black pepper. It was also known as the “Food of the Gods” and offered to Emperor Moctezuma II by the Aztecs, (Verna, R. 2013). Christopher Columbus was the first European to encounter cocoa in 1502.

Microbial life abounds on a solid substrate. Water and some nutrients are sufficient to allow the microbial construction called biofilm. Biofilm-associated infections (BAI) can enhance chronic infections in which the bacterial pathogens can persist causing cross-contamination of the food products.

Giaouris et al. (2014) worked on the meat processing and biofilm formation by foodborne bacteria. Work on seafoods has been well worked by Mizan et al. (2015). Habimana et al. (2010) studied them in feed industry on Salmonella versus host resident flora strains. Lin et al. (2017) have studied the characteristics of some food borne pathogens. In a study by Rao et al. (2020) cold atmospheric plasma can be a solution to prevent biofilms.Ferriol-Gonzalez et al. (2020) worked out that bacteriophages can be helpful to remove biofims. According to Przekwas et al. (2020) in early stage of growth of the biofilm use of ascorbic acid can be helpful for the removal of biofilms. Apples can be protected from pathogenic bacteria by protecting them using harmless bacteria. It leads towards the development of alternative foodborne-pathogen-control strategies. Listeria monocytogenes is a big concern in the NE part of India.

1. Introduction

Milk is a source of abundant nutrition has been a vital part of human civilization since prehistoric times. However, because of its perishable nature, it requires immediate processing to improve the shelf life and safe consumption .With the advancement of processing techniques in dairy and food processing, there is a widespread option being utilized to improve the milk shelf life byeither thermal technologies (pasteurization, sterilization, and ultra-high temperature) or nonthermal technologies (high pressure processing, high pressure homogenization, pulse electric field and ultra sonication). Still, pasteurization and sterilization are the two foremost process is used for milk industries. Pasteurization is the thermal inactivation of microorganisms at temperatures below100°C that enhance the safety and quality of milk and milk products and extends the shelf life to an extent. 

Breeding of Heifers

    ·    Regardless of age, puberty is reached when a heifer weighs approximately 40% of her mature body weight.
 
    ·    Breeding however, is recommended when a heifer has reached 60% of her expected mature body weight. This is normally achieved when the heifer is 14 to 16 months old.
 
    ·    Smaller breeds may be bred one or two months earlier than large breeds because they mature faster.
 
    ·    Heifers in good condition and gaining weight at breeding time generally show more definite signs of estrus and have improved conception rates over heifers in poor condition and/or losing weight.
 
    ·    Over-conditioned or fat heifers have been reported to require more services per conception than heifers of normal size and weight.

SYNOPSIS

Animal source foods (ASF) include any food item that comes from an animal source such as meat, milk, fish, eggs, cheese and yogurt. Many individuals do not consume ASF or consume little ASF by either personal choice or necessity as ASF may not be accessible or available to these people. Animals are used as food either directly or indirectly by the products they produce. Animal source foods (ASF) include any food item that comes from an animal source such as meat, milk, fish, eggs, cheese and yogurt.

The Hans Krebs cycle, known by different names like the citric acid or tricarboxylic acid cycle, was named after the scientist Hans Krebs. The citric acid cycle is named after the citrate product formed in the cycle. The name tricarboxylic acid is given as citrate itself, which is a tricarboxylic acid due to the presence of three carboxyl functional groups (-COOH).
The tricarboxylic acid (TCA) cycle occurs in aerobic conditions and within mitochondrial ETC, involving various sequential oxidoreductase reactions. The cycle requires Acetyl-CoA (C2 molecule) and oxaloacetate molecule (C4 molecule) to begin with the formation of a citrate molecule (C6 molecule). Acetyl-CoA is generated from the pyruvate (glycolysis), the fatty acids (lipolysis), or by oxidative deamination of specific amino acids. The complete oxidation of a glucose molecule results in the end products like energy (ATP), CO2 and H2O. A molecule of Acetyl-CoA has two carbons. It is formed from a three-carbon pyruvic acid molecule generated from the glycolysis of a sixcarbon glucose molecule. Acetyl-CoA is the substrate for this cycle and is an energy-rich molecule having a thioester bond between coenzyme A and acetic acid.
8.1 Formation of acetyl-CoA from Pyruvic Acid
Pyruvate is obtained by glycolysis or the oxidation of glucogenic amino acids. The pyruvic acid produced in the cytoplasm crosses the inner membrane of the mitochondrion to enter the mitochondrial matrix, where it undergoes oxidative decarboxylation, forming Acetyl-CoA. Acetyl-CoA carries (carrier molecule) the acetyl group to the citric acid cycle. It also links various metabolic products with the TCA cycle. Such products can be from the EMP cycle, beta-oxidation, and oxidative deamination of amino acids. Oxidative decarboxylation of pyruvic acid needs a complex enzyme system known as pyruvate dehydrogenase

Abstract

Ber is an important fruit of India and South Asia. Its cultivation is gaining popular in recent years. The drupaceous fruits of ber are characterized by climacteric respiration phenomena and produce high amount of ethylene at ripening. It is very high in ascorbic acid content. Maturity and ripening is still judged by colour changes, as reliable maturity indices for particular cultivars are not fully established. Short shelf life is major problem in this fruit. Protocols for postharvest handling is not standardized, however, scattered information are available for postharvest behaviour and handling. Low temperature storage is beneficial and reduces respiration rates but simultaneously chilling injury is again hindrance in commercialization. Postharvest rot is major problem in storage. Therefore, focused research is needed to standardize the storage temperature and alleviation of chilling injury.

Introduction

The tenet “Let food be thy medicine and medicine be thy food,” said by Hippocrates nearly 2,500 years ago, is receiving renewed interest. In particular, there has been an explosion of consumer interest in the health enhancing role of specific foods or physiologically active food components called as functional foods [1]. Clearly, all foods are functional, as they provide taste, aroma, or nutritive value. Within the last decade, however, the term functional as it applies to food has adopted a different meaning - that of providing an additional physiological benefit beyond that of meeting basic nutritional needs.

2.1 Soil and Climate

Pomegranate grows well in sandy-loam and well-drained soils having a pH of 7.5. It can also be grown on light soils. Quality and colour development in light soils is good but poor in heavy soils. It tolerates salinity up to 9.00 EC/mm and sodicity 6.78 ESP. Even it can be grown well in slightly saline soils as it is considered a saline-tolerant plant (Patil and Waghmare 1983; Rao and Khandelwal 2001; Ram Asrey et al., 2002). Accumulation of salts, in excess of 0.5% of the soil mass causes dying off of growing roots. Interestingly, application of Paclobutrazol (250 ppm) was reported to reduce salinity damage (Saeed 2005). The presence of water-soluble salts like sulphates and chlorides and ex- changeable sodium negatively affect root formation.

Abstract

Spray drying is one of the most preferred methods of converting food and pharmaceutical solutions into powder form. Very high product throughput, hygienic and highly automated process and relatively benign thermal and dehydration stress on products associated with this process has made it ubiquitous in powder manufacture. Compared to freeze drying, spray drying is significantly less expensive both in terms of operation and capital costs. In this chapter, key features of spray drying such as underlying operational principle, types of spray nozzles used, the flow pattern of droplets/particles and drying medium within the drying chamber, the particle formation process of individual droplet are discussed in considerable detail. The modelling aspect of a single droplet subjected to spray drying environment has also been included. Finally, the most commonly considered characteristics of spray dried powders including morphology, crystalline/amorphous nature and solubility are highlighted and discussed.  The content presented in this chapter will be very useful for practising engineers, technologists, researchers as well as postgraduate and undergraduate students.

All food legislation is predicated on the food law, which protects public health and consumers’ regarding food. The regulation is applied to stages beginning from producing the food, processing and finally distributing the food and feed, apart from domestic use by consumers.

Abstract

Food dehydration is an oldest method to increase the shelf life of food by reducing the water activity. A dried food product provides advantages of increased shelf life and reduced cost due to decreased weight as well as transportation. However, there is a decrease in product quality due to inadequate control on drying process parameters such as drying temperature and moisture removal together with change in thermo-physical properties of food. Computational modeling and simulations can provide a unique insight on the drying parameters that influences the product quality, and optimize the process conditions which are difficult by experimental analysis. Moreover, the computational techniques are advantageous over experimental optimization methods by minimizing the time and cost. This chapter reviews different computational modeling techniques such as, finite element modeling, finite volume and finite difference methods for modeling of food dehydration process. Also, this chapter describes the application of modeling techniques for determining the influence of shrinkage and porosity during dehydration.

Introduction

Oils and fats are utilized both for their food applications as well as for industrial purpose. As a food product, oils and fats are consumed in a variety of forms such as shortening, ghee, butter, margarine, cooking oil, salad oil, etc. Other uses include their usage in the form of lubricants, greases, soaps, cosmetics, paints as well as animal feed and biofuels. Among the Asian countries, Indonesia leads as the prime producer with more than fifty percent of the total palm oil production in the world. As a second-best producer of oils and fats, China was the major manufacturer of rapeseed as well as soybean oil in year of 2018. In general, Asian countries contributed to more than fifty percent of the total fat and oil manufacturing in the world in 2018 (Kushairi et al., 2018). Even though fats and oils are primarily utilized for food applications, there has been an increased interest in their industrial utility for the manufacture of biofuels. Fats manufactured from various animal sources like tallow or lard also contribute to a considerable quantity and compete with vegetable oils for the production of biofuels.

The resources for producing oils and fats are diverse depending on their end use, yet they are obtained from two major sources: animal sources and plant sources. Oils and fats are used as starting materials for the preparation of shortenings, margarines, and other tailored products that further act as functional ingredients in food products prepared by food processors, restaurants, and in home. They have been used for food and other variety of applications since the prehistoric times, due to their easy availability. For example, fatty tissues from animals liberate free-floating fats on being boiled, whereas oil can be pressed out from oil fruits and oilseeds.

The role of dietary oils and fats in human nutrition is also one of the important areas of interest. Over the time, oil and fat industry has provided significant contributions toward nutritional improvement of various products. With the growing concern linked between cardiovascular diseases and consumption of oil and fat products, low-calorie variants of different foods, free or low in cholesterol are also available now. Excessive fat consumption among the populations of developed countries and consequences of obesity has led to the development of reduced-fat and very-low-fat variants of foods.

1 Analysis of Chemical Composition of Milk

 1.1 Determination of Acidity of Milk

 Introduction

The acidity of milk can be determined by titrating the milk against standard sodium hydroxide solution using an indicator like phenolphthalein and is expressed in the terms of lactic acid. Though natural acidity in milk is due to its constituents such as casein, albumin, citrates, phosphates and carbon dioxide but it is customary to express in terms of lactic acid. As one gram equivalent weight of an alkali neutralizes one gram equivalent weight of an acid, the volume of standard alkali required to neutralize lactic acid of fixed volume of milk gives percent acidity of milk according to the reaction.

1 Analysis of Cream

 Sample Preparation

Warm the cream sample to 40 - 50oC if the sample is very viscous. Then pour from one vessel to another 3 to 4 times to mix well. Sample should be tested daily and always within three days after collection since enzymatic deterioration of the cream will cause low tests.

1.1 Determination of Fat Content in Cream

 1.1.1 Gerber Method

 Introduction

Sulphuric acid is added to cream in order to dissolve the protein and other solids and create heat which liquefy and de-emulsify the fat. Iso-amyl alcohol is added to aid the separation of fat. Upon centrifugation, fat being lighter will be separated on top of solution in the cream butyrometer.

Abstract

By loosely inspiring the actions of neurons in the human brain, artificial neural networks (ANNs) are widely accepted as a powerful nonlinear adaptive approach to tackle complex, dynamic, highly nonlinear, and ill-defined problems in an increasing number of fields of food industry.They have been used extensively in food drying to solve problems of nonlinear function approximation, pattern recognition, data description, optimization, simulation, pattern recognition, control, data sorting, clustering, and noise reduction, due to their massively parallel structure and capability to learn from examples. In this chapter, after providing a brief description of ANN technology and its principles as well as the structure of the most commonly employed ANNs in this context, an example is given to explain how the ANN technique is used for modeling and controlling food drying process. Generally, modeling, prediction, and optimization of heat and mass transfer, thermodynamic performance indicators, and quality parameters as well as physico-chemical attributes of dried foods are the most popular subjects to attract researchers’ attention to apply the ANNs in food drying industry.

1. INTRODUCTION

The growing demand of consumers for fresh, safe, chemical, additive or preservative free and minimally processed foods has compelled the food scientists and technologists to develop many non-thermal food processing technologies which cause minimum nutritional and sensory qualities impairment in the processed foods. In this endeavour, consumers prefer minimally or non-thermally processed foods rather than the thermally processed one. Today, non-thermal technologies like High Pulse Electric Field (HPEF) processing, High Hydrostatic Pressure (HHP) processing or Hight Pressure Processing (HPP) food irradiation, ultraviolet light, ultra sound, arc discharge, oscillating magnetic fields, light pulses, plasma, chemicals (ozone, carbon dioxide, argon), and the combined methods of these technologies are the major areas of research in the process and food engineering in order to find their suitability for processing of various food products.

Probiotic Fermented food products
 
An individual requires adequate nutrients like proteins, carbohydrates, vitamins, and minerals to maintain diet. There has been an explosion of the consumer interest in the role of enhancing the health by some specific foods or physiologically active food components, so called functional foods (Hasler, 1998). The concept of functional foods evolved in the year 1990 in Japan.

Introduction

The entire living organism from the smaller creatures viruses to the advanced human beings are composed of a set up of biochemical reactions which form the metabolism. These set of metabolic reactions are responsible for the life of organism. The rate of these reactions is a major concern for effective working of organism which is governed by biocatalyst. These biocatalysts are known as enzymes, which accelerates rate of biochemical reaction. These are not utilized in reaction. In 1877, Wilhelm Friedrich Kuhne (Kuhne, 1877) proposed the term enzyme which means ‘in yeast’ and is derived from the Greek word; inzume “leavened” or “in yeast”. At the molecular level of study it is observed that enzymes are proteins which are functional as tertiary and quaratanary structures. Enzymes have active site for the binding to substrate. The active site has two positions; binding and catalytic site (Ogeston, 1948). The former help to bind the substrate with the enzyme followed by the catalysis of reaction by the catalytic site.

B.T.U.: It stands for British thermal unit. The heat required to raise the temperature of one pond of the water through 1oF is called BTU (Plate 82).

Baby back ribs: Meaty pork ribs cut from the lower back rib section.

Bacitracin: A polypeptide antibiotic isolated from a bacillus (Bacillus subtilis or B. licheniformis) and usually used against gram-positive bacteria.

Back Bacon / Canadian bacon: Bacon cut from the loin that has little fat and is cut into round or oblong slices.

Backward feed evaporator: In this evaporator, fresh feed enters the last and the coldest effect and continues on until the concentrated product leaves the first effect (Plate 83).