eChapters

These are the plants that grow mainly for its ornamental or attractive leaves rather than its flowers and grown indoor or around the house. Foliage plants are often cultivated to show a variety of unique or exotic leaf shapes, textures and colours.

There is a tremendous scope in the use of these plants to beautify houses, offices, hotels, hospitals and almost all public buildings. In the modern concept and practice of indoor gardening, the scope of growing plants has been extended too many areas in and around the house including balcony, verandah, terraces and patios. These foliage plants can be displayed in different ways to bring the beauty to the surrounding. Some of the house plants can be suited well for decorating the corners of the rooms like Aglaonema, Acalypha, Croton, Dracaena, Cordyline, Dieffenbachia, etc. whereas, for enhancing window sills and boxes suitable plants are Hedera, Coleus, Euphorbia, Kalanchoe, Pilea, etc. For hanging purposes Monstera, Scindapsus are the first choice.

Foliage plants are grown for attractive branches and leaves. These plants have several benefits such as improving air quality, promoting better mental & physical health and enhancing the aesthetic value of the immediate vicinity. Some of the foliage plants grown in indoor or in the garden are described in this chapter.

Dieffenbachia

Dieffenbachia is a foliage plant with large and showy leaves. This is native to the West Indies. It is a very popular plant grown in the home gardens due to easy maintenance. The beauty of the plant lies in the unique pattern of colour combination of the leaves. The leaves are yellow near the vein, which turns dark green towards the edge. This combination is random and even within the same leaf, different patterns of ribbons and spots of yellow & green are formed. It can be taken up under various light intensity and growing conditions. Dieffenbachia plants grow up to 2.4 meter height with wide leaves of around 50 cm long and 25 cm wide. 

Description of the important foliage trees

Abstract

Medicinal plants growing around us are the biggest gift to mankind from the nature. They grow abundantly and over centuries, humans have learned how to utilise plants for the treatment of illness. The great Himalayan belt is home to many endemic medicinal plant species. These plants are the rich source of traditional medicines and form a basis for livelihood of rural and indigenous populations. The present study is aimed to investigate the medicinal wealth of Bani valley that lies in Kathua district, (J&K) which is a part of Western Himalaya. Due to varying climatic conditions, terrains and forest types, the valley is home to various endangered and endemic medicinal plant species. A total 231 plant species belonging to 69 families ranging from angiosperms, gymnosperms and cryptogams (lycophytes and ferns) were documented by frequent field surveys and reviewed by published literatures and floras. Out of 231 plant species, herb species were 142, shrub species were 43 and tree species were 46. Asteraceae was recorded as dominant family followed by Fabaceae, Lamiaceae, Rosaceae, Polygonaceae, Ranunculaceae, Poaceae, Solanaceae, Acanthaceae and Urticaceae. Ethnobotanical data used for various ailments and diseases were obtained from local tribes.

Abstract

Since pre-historic times plants have tendered their services to mankind in the form of food, shelter and medicine. Due to the advancement of human civilization, various folklore systems of medicines were developed across the globe. Among the various folklore system of medicine, Sowa-Rigpa” is one of the oldest well recognised and widely accepted system of folk-lore medicine in the world. It is one of the commonly used of system of medicine in different parts of Tibet, Bhutan, China, former Soviet Union (some parts), Himalayan ranges, Magnolia and, Nepal. The exact origin of Sowa-Rigpa system of medicine is still not known. In the present scenario due to the awareness among the people about the determental effects of the modern chemical drugs, people preferred to use herbal based system of medicine to treat diseases. So, it is needed to understand the floristic wealth of tradional system of medicine to identify the important plants with potential source of drug candidate molecules. In the present chapter an attempt has been made to study the folklore plants used in Tibetan Mountain based Sowa-Rigpa system of medicine and food. Total 332 plant species presented as the most important in Sowa-Rigpa system of medium.

1. Introduction Fonio (Digitaria exilis), also known as acha, hungry millets, and fundi in various regions, is a minor and underutilized millet with exceptionally small size (H. Sartelet et al., 1996; Bello et al., 2020). This ancient crop native to West Africa is considered one of the oldest cultivated millets for ensuring food security. Figure 1 illustrates the components and structure of fonio millets. In recent times, fonio millet has garnered increased attention due to its remarkable nutritional and functional properties (Zhu, 2020). Being gluten-free, it is rich in nutrients such as carbohydrates, fat, fiber, vitamins, and minerals (Fe, Cl, K, Mg) as well as essential sulphur-containing amino acids like methionine and cysteine, which also possess phenolic properties (Barikmo et al., 2004; Zhu, 2020).

Fonio is an indigenous cereal crop of West Africa. Fonio grain belongs to genus Digitaria Haller that consists of 230 to 325 grass species, both annual and perennial. The fonio species is a part of Poaceae family, sub- family of Panicoideae, and the tribe of Paniceae. Fonio grains have a protective covering (husk) outside the kernel, similar to rice.

1.    Food Additives are

(a) Nutritive substances added to enhance flavour, texture or storage properties

(b) Non-Nutritive substances added to enhance flavour, texture or storage properties

(c) Both (a) and (b)

(d) Chemicals, added for preservation

2.    Which is an acceptable application of a food additive?

(a) As a fat replacer

(b) As an antioxidant

(c) As a food colorant

(d) All of these

Introduction

Since ancient times, addition of chemicals to food and food products has been done in order to to accomplish specific functions. Spices, smoke, vinegar, and alcohol were utilised to preserve foods more than 10,000 years ago. Usage of additives in food increased dramatically in the early 1900s, in tandem with advances in food chemistry and preservation. New, tasty, convenient, and healthy meals continue to be in high demand. As a result, by the early 1960s, over 2500 different types of additives were identified and utilized by developing countries in their diets. Basic foods are additive free, but as we increase the level of processing for conversion into an array of products, variety of additives are incorporated to increase the shelf life; to retain the nutritional value as well as to achieve higher standard of sensorial characteristics.

1. Introduction

Processed foods have become a way of life in the modern world. Manipulation of chemical and physical properties facilitated by modern food technology and followed by addition of food additives has created a plethora of innovative food products that offer consumers greater convenience, variety, safety, satiety and quality.
Food additives have been in use for centuries for preservation, for providing improved appearance or desired texture and flavour. Preservation of foods started with salting and smoking. The Egyptians used colours and flavours, Romans used saltpeter and in India, turmeric is being used. Similarly additives such as baking powder as a raising agent, thickeners for sauces and gravies and colours- synthetic as well as from natural sources are being used.
Today more than 2500 food additives have been in use mainly due to the spurt in the research activities in food science and technology that are aimed at providing different characteristic functions to foods. Out of these, about 1300 are the flavouring additives.

Importance of Food Additives

Food additives are chemicals, biochemical ingredients etc., which are added to food products for their technological benefits. These benefits may be to preserve the quality of food, to maintain and improve its appeal, to ensure its nutritional value and to provide innovations in new products with consumer appeal and satisfaction. Additives are also added to maintain uniform quality and to enhance quality parameters such as flavour, colour, texture etc. in large-scale production. They and their by-products ultimately become part of the food that is consumed and so they must be safe.

Additives may be direct additives, which are added deliberately to improve its sensory quality, nutritive value, stability, ease in processing and retention of quality during handling and retailing. There are also indirect additives, which are not added intentionally but get included into foods incidentally during handling, processing and packaging.

There are some guiding principles for the use of food additives. They should be justified for their technological effectiveness and purpose. They should be safe for use. There should be maximum adequate levels, absolutely necessary levels of usage and ADI (Acceptable Daily Intake) properly evaluated while considering its safety and permitted usage levels in foods. They should not be added with the intention of misleading consumers about quality. They should also not significantly affect adversely the nutritional quality of food products.

Introduction

Food additives are substances of natural or synthetic origin, which are added to foods to serve a certain technological or sensory function. They are utilized in the preparation and processing of almost all types of food in order to give favorable attributes to the food. Additives are the substances which are of little or no nutritive value but are added to food to enhance its flavour, appearance or other favourable quality. They are used in the processing or storage of foods especially in the developed countries includes antioxidants, food preservatives, colouring and flavouring agents etc. Food additives are substances added to food to preserve flavour or enhance its taste and appearance (Latiful Bari and Yeasmin 2018). Some additives have been used for centuries for example, preserving food by pickling with vinegar, salting, as with bacon, or using sulfur dioxide as in some wines. The use of food additives is not a modern-day invention; they have been used for centuries. The practice probably started when man first discovered that fire would cook and thereby preserve his meat. Later he realized that the addition of salt would preserve without cooking. Food preservation began when man first learned to safeguard food from one harvest to the next and by the salting and smoking of meat and fish. The Egyptians used colours and flavourings and the Romans used spices and colours for preservation and improving the appearance of foods. Thus, food additives have been used for centuries to enhance the variety of food products, to preserve, improve its taste and appearance, and provide a better mouth feel. Food additives afford us the convenience and enjoyment of a wide variety of appetizing, nutritious, fresh, and palatable food. Their quantities in food are small, yet their impact is great.

Food additive is any chemical substance that is added to food during preparation or storage. A food additive either becomes a part of the food or affects its characteristics for achieving a particular effect. For instance, substances that are used to enhance the appearance, texture, or to keep qualities of a food are considered food additives.

Food adulteration means anything adding or subtracting with food making it injurious to health. This adulteration may be done intentionally or unintentionally. Intentional adulteration is a criminal act and punishable offense. Or the process of lowering the nutritive value of food either by removing a vital component or by adding substances of inferior quality. Food Safety and Standards Act of India (FSSA) defined “adulterant” as any material which is or could be employed for making the food unsafe or sub-standard or mis-branded or containing extraneous matter”. According to Federal Food, Drug and Cosmetic Act (FFDCA), the primary food safety law administered by the Food and Drug Administration (FDA), food can be declared adulterated if:

1. a substance is added which is injurious to health
2. cheaper or inferior quality item added to food
3. any valuable constituent is extracted from main food article
4. quality of food is below the standards
5. any substance has been added to increase bulk or weight
6. to make it appear more valuable

Food adulteration is an unethical and often criminal malpractice. It is very common in countries of the South-East Asia region. It frequently occurs where informal food production and marketing services are predominant and enforcement of food regulation is weak. The prohibited substances are either added or used to partly or wholly substitute healthy ingredients. This creates the impression of freshness in old food artificially. Adulteration in food is usually done for financial gain. The high target is spices due to the demand and also their high price. Sometimes it can happen due to lack of proper hygienic conditions of processing, storage, transportation and marketing. The consumer is either cheated financially or becomes a victim of illness or disease. In case, the consumers take a lot of precautions at the time of purchase of such products it would help them in avoiding the purchase of such adulterated food. The whole spices: Dirt, dust, other seeds; chili powder: brick powder, salt powder or talc, powder. In ghee/butter: vegetable ghee, animal fat, mashed potato, sweet potato, etc. ; ice cream and beverages:saccharin; honey: jaggery, sugar syrup. Food contaminants are not added to the foods. They are present in foods as a result of the production (crop farming, animal husbandry and aquaculture), manufacture, processing, preparation, treatment, packing, packaging, transport or holding of such food or as a result of environmental contamination. Usually it includes the presence of harmful chemicals or microorganisms in food, which if consumed can cause several debilitating illnesses. Many times, unknowingly, the contamination may occur during the production, processing, storage and marketing.

Introduction

In the ancient era, adulteration was practiced as economical fraud like the addition of water to milk and stone to grains and pulses but nowadays it has become a global concern due to adverse health effects of adulterants on a human being. Words like substitution and admixture can help define adulteration. In general, adulteration is defined as either removal of valuable constituents from food or intentionally/ unintentionally addition of substandard quality material to degrade food quality. Food adulteration not only negatively affects the quality of food products but also results in numerous adverse health effects along with significant economic problems (Cheng et al., 2015).

Abstract

We are very fortunate to be born in a nation which is blessed with awesome decent variety of natural products, fruits, vegetables, cereals, pulses and so forth. The population of India expanded consistentlythat cause a genuine sustenance and shelter problem. The supply of food is not adequate to fulfill the demand of the consumers. This shortage of food is the root for adulteration of foodstuffs by the traders. Food adulteration is a procedure in which the nature of sustenance is brought down either by the addition of inferior quality material or by extraction of valuable ingredient. An adulterant is a chemical substance which should not be contained within other substances (food, beverages) for legal or other reasons. The addition of adulterants is called adulteration. Food is adulterated to increase the quantity and make more profit. The food is sucked of its nutrients and the place where the food is grown is often contaminated. For instance: milkis mixed with water. Vanaspati is utilized as an adulterant for ghee. Adulteration of food is unsafe as it may be toxic and causes serious health hazards to the consumer. To evade this issue government has passed an act which is known as preservation of Food Adulteration Act. It covers security from risks involved due to contamination of poisonous elements. Instead of government efforts the informed and aware consumers will have the capacity to dispense with this issue. So, here in the chapter adulterants their types, effect on human health, laws and control measurement were reviewed and discussed.

INTRODUCTION

Adulteration of food consists of substituting it wholly or in part by any cheaper or inferior substance or of removing any of its constituents, wholly or in part, which affects adversely the nature, substance or quality of the food. According to the Indian Prevention of Food Adulteration Act (PFA) 1954, any ingredient which, when present in food, is injurious to health is an adulterant. Thus, according to the PFA definition, many of the food contaminants discussed in the previous section are adulterants and come under the purview of food adulteration.

Adulteration of foods was practised even in ancient times. It was not a serious problem then because business was on a small scale and the transactions involved a large measure of personal accountability. Later, with the increased centralization of food processing and distribution, and corresponding decline in personal accountability, intentional adulteration of food increased. Even in the early nineteenth century, many adulterants were used in articles like pepper, essential oils, vinegar, beverages (coffee, tea, beer, wines), butter, bread, etc. In recent years adulteration of foods has become a serious problem the world over. In western countries there is a rising concern over the safety of the food supply and many remedial actions, both voluntary and enforced, have been taken.

1. Guidelines on Analytical Terminology

    1.    Accuracy : The closeness of agreement between a test result or measurement result and a reference value.

    2.    Analyte : The chemical substance sought or determined in a sample. This definition does not apply to molecular biological analytical methods.

    3.    Applicability : The analytes, matrices, and concentrations for which a method of analysis may be used satisfactorily.

    4.    Bias : The difference between the expectation of the test result or measurement result and the true value. In practice conventional quantity value can be substituted for true value.

    5.    The bias of a measuring instrument is normally estimated by averaging the error of indication over the appropriate number of repeated measurements. The error of indication is the: “indication of a measuring instrument minus a true value of the corresponding input quantity”.

    6.    Calibration : Operation that, under specified conditions, in a first step, establishes a relation between the values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties and in a second step uses this information to establish a relation for obtaining a measurement result from an indication.

    7.    Certified reference material (CRM) : Reference material accompanied by documentation issued by an authoritative body and providing one or more specified property values with associated uncertainties and traceability, using valid procedures.

Wetland birds serve an important ecosystem function of accelerating the nutrient cycling in the feeding grounds (Morales and Pacheco, 1986) and regulating fish populations (Miranda, 1995). According to Drent and Dann (1980), the availability of food is of primary importance to the birds during migration when, they store energy for winter survival and successful completion of migration. Many migrant shorebirds relay on a few key stopover sites to complete their annual migratory cycle (Myers et al., 1987), which provide a unique combination of food resources and habitat necessary to support these large numbers of birds (Myers, 1984).

When animal species assemble at a particular area, they utilise individual but overlapping segments of the habitat (MacArthur, 1958). Karr (1980) stated that resource utilization pattern and the community organization are determined by a combination of variables. The availability and preference of the food organisms, feeding behaviour and utilization of the habitat for feeding and reproduction differ in co-existing animal species. Periods of rapid change in prey populations offer important opportunities to study the relationship between predators and their prey. In particular, such studies can yield information on the functional response of predators to a changing prey environment and the role of prey dynamics in the regulation of predator population size.

Introduction

The concept of feeding system of different aquatic components of the aquaculture is not simple like that of domestic animals where feed, feeding and the animals can be observed closely and manipulated at once. In case of aquaculture both biotic and abiotic factors play an important role in feeding as well as the growth of the animal. Factors like water temperature, dissolved oxygen, light intensity, etc. regulate the intake of feeding, its digestion and assimilation. Conditioning factor, feed conversion rate, survival rate, percent weight gain, daily weight gain, specific growth rate are some of the parameters used routinely to monitor the effects of feeding on growth performance of the fish.

In aquaculture, supplementary feed is provided in conjunction with the available natural food such as plankton, periphyton, benthic organisms, aquatic plants etc. Aquaculture is a feed-based industry, with artificial feed accounting for major expenditure exceeding 60% of total operational cost. In India, freshwater aquaculture is mainly carp-based, which accounts for about 89% of total aquaculture production (Ayyappan and Jena, 1998). Successful and sustainable aquaculture depends upon the provision of nutritionally adequate, eco-friendly and economically viable artificial feeds. Effective utilization of feed depends upon many factors such as acceptability of the feed, its digestion, assimilation etc. apart from other rearing management protocols.

Food and Industrial Microbiology

    1.    Microbiology often has been defined as the study of organisms and agents too small to be seen clearly by the unaided eye—that is, the study of microorganisms

    2.    Two bacteria that are visible without a microscope, Thiomargarita and Epulopiscium.

    3.    Procaryotic cells [Greek pro, before, and karyon, nut or kernel; organism with a primordial nucleus] have a much simpler morphology than eucaryotic cells and lack a true membrane-delimited nucleus. All bacteria are procaryotic.

    4.    Eukaryotic cells [Greek eu, true, and karyon, nut or kernel] have a membrane- enclosed nucleus; they are more complex morphologically and are usually larger than procaryotes. Algae, fungi, protozoa, higher plants, and animals are eucaryotic.

    5.    The ordinary microscope is called a bright-field microscope because it forms a dark image against a brighter background

    1.    Laminar flow hood works on the principle of 
        a)    High-efficiency particulate air filter
        b)    High-energy particulate air filter
        c)     High-efficiency pressure air filter
        d)     None
    2.    Most of the organisms are killed
        a)    121°C for 5 min.    b)    15lb/in²
        c)     a & b    d)     None
    3.    Autoclaving is not recommended for
        a)    Oils    b)    Powders
        c)     Sensitive fluids    d)     All

1.    Evolutionary relationships between groups of organisms are determined using comparisons of

(a) Biochemical pathways

(b) Nucleotide sequences

(c) Structural features

(d) All of these

2.    The different bacterial species can be subdivided into

(a) Serovarieties

(b) Biovarietites

(c) Subspecies

(d) All of these

3.    Kingdom Prokaryotae include

(a) Bacteria

(b) Protozoa

(c) Fungi

(d) None of these

Introduction

India is one among the progressive countries in the world in maintaining food and nutrition database efficiently. The country has been in the fore front in signing the resolution on ‘Transforming the World: the agenda for Sustainable Development-2030’. India outstood among the developing countries in food self-sufficiency since seventies with low household hunger rates and low infant mortality rate. In the meanwhile, the country faced double burden of food and nutrition with inadequate dietary intake and under nutrition in one hand and overweight due to low physical activities on the other hand. Rapid increase in population with diminishing food production led to food insufficiency and malnutrition whereas, rapid economic growth and increasing mechanization led to the increasing prevalence of overweight and obesity. Both the under- and over nutrition are associated with health hazards, hence, use of normal body mass index (BMI)would be considered as an indicator for food security (FAO, 2013)

1. INTRODUCTION

It is hard to conceive which came first on earth, human being or food. If the human was born first, he or she needed food immediately to survive. Thereafter, the human beings continued to need food and continued to eat food throughout his or her life. Hence, the relationship between human being and food is permanent and the requirement of food for the human being to be alive is everlasting. Further, sources of food may survive in nature without human intervention but human being can not remain alive without food. This clearly signifies the permanent bondage of human being and food which is inseparable under any circumstances. ‘Thus, should we state that every human being necessarily needs food and should have right to food as soon as born.

In order to further strengthen this view, the governance which rules human beings should also be protective and enact laws to ensure food to each human being born in respective countries.

2. BACKGROUND

•   “Hunger is exclusion”, wrote de Castro (1963) a Brazilian anti-hunger advocate. “Exclusion from the land, from jobs, wages, income, life and citizenship. When a person gets to the point of not having anything to eat, it is because all the rest has been denied. This is a modern form of exile. It is death in life”.

•   Simply by being born, everyone has the right to food. A person doesn’t have to do anything to “deserve” it; the right to food is a birthright. But this does not entitle a person to sit back and ask for free food. People are responsible for doing all they can to realize their own right to food. Governments that are parties to the International Covenant on Economic, Social and Cultural Rights are responsible for ensuring that all those living within their borders have the means to do so, (FAO, 2007).

•   Broadly speaking, governments should create peaceful, stable, free and prosperous environments in which people can feed themselves in dignity. Even without a legal obligation to do so, countries have a moral obligation to ensure freedom from hunger (FAO, 2007).

Set 1

1. Match the followings:

1. (a & i), (b & ii), (c & iii), (d & vi)
2. (a & ii), (b & i), (c & iv), (d & iii)
3. (a & iii), (b & i), (c & iv), (d & ii)
4. (a & iv), (b & ii), (c & i), (d & iii)

Introduction

Hunger and all forms of malnutrition continue to cause widespread suffering throughout the world. Malnutrition in children commonly leads to poor growth and poor physical and mental development, increased morbidity and, all too often, death. Among adults, malnutrition leads to lethargy, frequent illness and poor health, reduced physical capacity to do work, poor pregnancy outcomes among women, decreased cognitive function and a loss of learning potential and productivity. Widespread hunger and malnutrition also serve as severe impediments to social and economic development at both community and national levels. After years of steady progress, recent setbacks in the fight against hunger and malnutrition arising from the combined effects of high food prices and the global economic downturn coupled with the continuing problems of underdevelopment, civil strife, inadequate food supplies, social discrimination and environmental stress, jeopardize the earlier hopes for achieving the poverty, hunger and nutrition-related Millennium Development Goals (MDGs).

According to FAO, there were 105 million more hungry people in 2009 than in the previous year and the number of malnourished people now stands at 1.02 billion. In the worst-affected countries, individual productivity losses due to malnutrition are equivalent to 10% of lifetime earnings, resulting in gross domestic product (GDP) losses of up to 3%. Around the world close to 10 million children die before their fifth birthday every year, over one-third of which are associated with under nutrition. One in three developing-country children under the age of five - 178 million children – are stunted due to chronic under nutrition and poor health, and some 148 million children are underweight. Micronutrient deficiencies or “hidden hunger” affects around 2 billion people worldwide or about one third of the world’s population. These vitamin and mineral deficiencies, especially of iron, iodine, zinc and vitamin A, lead to poor physical growth and development, lowered mental capacities, reduced productivity, impaired immune systems, blindness and death - all of which are preventable.

Introduction

Fish symbolizes as prosperity and fertility of the region rather than for its food and nutritional security in many parts of the world. The abundant inland waters resources such as reservoirs, rivers and wetlands contribute to meet the food and nutritional security of a nation. The rich diversity of freshwater fish fauna supplements as a quality animal source protein, macro and micro nutrients for the health benefits of all age group of human population. Hence, the fishery activities such as fish catch and production enhancement from inland water resources are emphasized to scale up to meet the growing demand. The world fish production through inland capture fisheries has increased from 10.5 million tons in 2009 to 11.9 tons in 2014. The utilization of the existing vast inland resources through technical interventions would impact on food and nutritional security and livelihood of the fishers and rural masses of the developing countries.

Ice cream is not only an indulgent frozen dessert but also a food containing several nutrients derived from milk, cream, sugars, and other ingredients. This chapter examines ice cream from a nutritional and food-science perspective, focusing on its major nutritional components and energy contribution. It discusses milk fat, proteins, lactose, carbohydrates, minerals, vitamins, and the nutritional effects of formulation. The chapter also considers energy value, portion size, digestibility, and palatability. Understanding these factors helps explain why ice cream provides both nutritional and sensory value. The discussion provides a balanced foundation for evaluating ice cream as part of varied diets and developing products for different consumer requirements.

The major components of foods are the protein, carbohydrates and fat. The spoilage of foods containing fats includes the deterioration of the fatty components; the principal difficulties found in their preservation are in the development of rancidity. The spoilage of fats and oils has received much attention and substantial progress has been made in their preservation. One of the major causes of food deterioration is the chemical oxidation of unsaturated fatty acids in the lipids present in all foods. These fats are present in fat deposits and in cell membranes. End products of lipids oxidation, mainly aldehydes and ketones, contribute to the rancid off flavour and odours in the foods.

Fatty acids in food occur in the form of esters with the alcohol. The predominant esters are triacylglycerols accompanied by minor amounts of mono- and diacylglycerols and free fatty acids. The unsaturated bonds present in all fats and oils represent active sites that can react with oxygen. This reaction leads to formation of primary, secondary, and tertiary oxidation products that may make the fat or fat containing food unsuitable for consumption. Other consequences of oxidation include discolouration; changes in the texture, flavour and taste; and loss of nutritional value due to the destruction of essential fatty acids as well vitamins. Unsaturated fatty acids are subject to oxidation at their double bonds. In the presence of suitable catalysts, or in contact with lipooxidase enzymes, long chained unsaturated fatty acids may be fragmented to short chained fatty acids. The cleavage usually involves an intermediate peroxide formation. Many chemicals compounds aid in food preservation to protect the nutrients, flavour and texture, and storage stability of food stuff for longer period.

1. Introduction

Bamboo has historically been an integral part of human culture. Bamboo is a mystical plant representing symbol of strength, flexibility, tenacity, endurance and compromise. Throughout Asia, bamboo has for centuries been integral to religions, ceremonies, art, music and daily life. Bamboo provides numerous environmental benefits such as playing a critical role in the balance of oxygen/carbon dioxide in the atmosphere. Bamboo is the fastest growing canopy for the regreening of degraded areas and generates more oxygen than equivalent ultraviolet rays. It is an atmospheric and soil purifier. Its soil conservation properties create an effective watershed, stitching the soil together along fragile river banks, deforested areas, and in places prone to earthquakes and land slides. Its fast growing and high yield nature makes it a highly valued renewable resource. Its low cost and abundance call for its utilization to a full extent. 

SYNOPSIS

Food is an essential element without which human being cannot survive. We need it for our maintenance and growth everyday and through the longevity of our life. As we understand food, it is a bunch of essential elements which is essentially needed for the engine of human body to run non-stop. The understanding of food is much required by masses who consume it every day. The present paper attempts to describe the knowledge on food, feeling on food by consumers, prevailing food, hunger and malnutrition, healthy food and studies required on consumable foods.

Previous Year Questions

1. Differentiate between protective foods and energy foods. (10M, IFoS 2015)

2. What do you mean by ‘hunger’ and ‘hidden hunger’? Comment on various strategies in combating hunger. (15M, CSE 2021)

3. Classify foods on the basis of their function (5M, 2023)

Introduction

Terrorism has been experienced throughout human history by unlawful violence against innocent population to achieve financial or religious or political objective (Rakesh Gupta, 1998). Terrorism has no geographic or geopolitical boundaries and is adapting to changes in the socio-political environment. Progress in the area of science and technology have the potential to be used for both beneficial and harmful purposes leading to dual-use dilemma. Of late, more scenarios are witnessed where the applications of well-intentioned scientific research are being used for vicious purposes. Earlier, terrorism has been associated primarily with physical acts of violence and crime. Eventually the global militant and terrorism strategies evolved to chemical, nuclear, radioactive explosive agents to biological terrorism. Recently, cyber terrorism controlled by computers has seen a new form of criminal activities (www.hannover-re. com).

Introduction

A food safety system revolves around different aspects, beginning right from the farm, where the food is created and transported to where the customers purchase, eat and dispose. This includes production, processing, distribution, preparation, marketing, access, consumption, and disposal. These processes need to have numerous resources like people, business, farms, communities, interventions, policies, and politics. All steps ought to be coordinated for an organisation to make progress. In today’s world of processed foods and industrial farming practices, ingredients and preparation procedures are typically uncertain. In order to reduce the confusion of consumers and to provide quick, straightforward identification of the commodities they’re searching for, many items are now “certified” by revered organizations.

Food safety certification is a third-party verification, to ensure that commodities, processes or systems in the food supply chain meet accepted food safety standards. It is distinct from different systems like supplier declarations, laboratory test reports or inspection body reports. Food certification is predicated on the results of tests, inspections and audits and provides confidence to the buyer as a result of an organization’s commodities or system are being completely evaluated against accepted national and international business standards by a competent third body.

Introduction
Food Chains
Food chains are made up of organisms that eat and are devoured by one another as a means of transferring energy from the source in plants. “The transfer of energy from plants through a series of organisms with repeated eating and being eaten” is one definition of it.
A food chain is the movement of energy from producers at one trophic level to consumers at the next. In a food chain, energy moves only in one direction. An understanding of food chains can provide important insights into how ecosystems work.
• Grazing food chain
Grazing food chains and detritus food chains are the two main categories of food chains.
The food chain known as grazing begins with living green plants, moves through grazing herbivores, and ends with carnivores. Such a food chain places an immediate demand on ecosystems for solar radiation. From an energy perspective, these chains are very significant.

    1.    What is the percentage of water in an adult’s body weight
        a)    50%    b)    60%
        c)    90%    d)    70%
    2.    __________ is a direct reactant in hydrolytic processes of many foods
        a)    Water    b)    Moisture content
        c)    Both a&b    d)    None
    3.    The bond angle of the isolated water molecule (vapor state) is
        a)    109°    b)    104.5°
        c)    109°28'    d)     103.6°

• Food science deals with the physical, chemical, and biological properties of foods as they relate to stability, cost, quality, processing, safety, nutritive value, wholesomeness, and convenience.
• Food science is a branch of biological science and an interdisciplinary subject involving primarily microbiology, chemistry, biology, and engineering.
• Food chemistry, a major aspect of food science, deals with the composition and properties of food and the chemical changes it undergoes during handling, processing, and storage.
• Food chemistry is intimately related to chemistry, biochemistry, physiological chemistry, botany, zoology, and molecular biology.
• Nonenzymic browning involves reaction of carbonyl compounds, which can arise from existing reducing sugars or from diverse reactions, such as oxidation of ascorbic acid, hydrolysis of starch, or oxidation of lipids.

Some chemical and biochemical reactions that can lead to alteration of food quality or safety

1. Food is an essential part in everyday life.

2. The major biomolecules of the food which perform these functions called nutrients.

3. The study of various nutrients in relation to their effect upon the human body is called as nutrition.

4. Major nutrients: Carbohydrates, Lipids, Proteins, Minerals, Vitamins and water.

5. Insufficient food intake of necessary minimum amount of any nutrient leads tot state of malnutrition.

6. No food intake leads to starvation.

7. Water is not always included as nutrients, but it is essential that the diet provides sufficient water required for many functions of the body.

8. Lipids provide calories and essential fatty acids,

9. Lipids 98% of triglycerides + 2% phospholipids.

10. Lipids carry fat soluble vitamins.

Introduction

The process of concentrating a fruit juice / pulp, vegetable juice, medicinal plant extracts or milk to a reasonably thick consistency is called concentration. Thus, concentration is a water removal process from the liquid food materials. The basic principle of concentration is boiling the liquid under partial vacuum at low temperature till desired concentration is reached. With respect to water removal, the concentration process is similar to dehydration. The food concentration is distinguished from drying on the basis of the finished product where the final product called concentrate is still liquid. In concentration process, only liquid food is used while in drying both liquid as well as solid food can be used. Fruit juice concentrates, milk concentrate are valuable semi-processed products for use in the production of value added products like fruit juice beverages and fruit juice powders. Since the water content of single strength fruit juices is very high (about 75-90%), concentration of fruit juices not only provides microbiological stability but also permits economy in packaging transportation, and distribution of the finished product due to reduction in bulk by weight and volume.

1. The non-protein component in enzymes which is necessary for its biological activity is called
   1. Nucleic acid
   2. Lipids
   3. Phosphoric acid
   4. Coenzyme
2. The coenzymes are derived from
   1. Hormones
   2. Vitamins
   3. Lipids
   4. Carbohydrates

Introduction

Complex mixtures of synthetic and/ or natural ingredients are used to create f lavors through flavors and aromas. These ingredients can either be mixtures, like vanilla bean extract, or single substances, like benzyl acetate, depending on the application to enhance the flavor of (processed) food products. The introduction of the first synthetic flavor and scent chemicals, Vannillin and Coumarin, in 1868 marked a significant milestone in the food industry's ability to create flavors artificially.

Introduction Flavour has a significant impact on consumer pleasure and subsequent food intake. Chemical synthesis or extraction are used to create the majority of accessible fragrance molecules. Synthetic flavourings are frequently shunned by customers who believe that hese compounds are harmful or pose a health risk to them. (Teixeira et al., 2004). The association between flavour stability and food quality and acceptance has piqued researchers' interest, yet it's tough to control. Food manufacturing and storage procedures, packaging materials, and ingredients frequently alter overall flavour by lowering the intensity of aroma compounds or introducing off-flavor components (Lubbers et al.,1998). Because there are so many variables in flavours, they constitute extremely complicated systems. Some are more stable in water soluble carbohydrates, whereas others are more stable in lipid-based coatings. Physico-chemical characteristics, concentration, and interactions of volatile aroma molecules with food components are just a few of the aspects that determine the overall quality of the food. It's a good idea to encapsulate volatile components before using them in foods or beverages to prevent fragrance degradation or loss during processing and storage. Encapsulation is the process of coating or encasing one material or a mixture of components into another material or system. The coating substance is known as shell, wall material, carrier, or encapsulant, and the coated material is known as active or core material.

8.1. Introduction
Micronutrients are vitamins, minerals, and nutraceuticals that do not provide energy and do not raise any sensation of hunger known as “hidden hunger” or “insensible hunger”. Hidden hunger that causes micronutrient deficiency affects 2 billion people globally. Due to the deficiency of micronutrients, different diseases are noted among public health professionals that reflect poor community nutrition. To overcome these deficiency-related diseases, one of the important approaches is food fortification. Food fortification is a public health policy to reduce the number of individuals, who suffer from micronutrient deficiencies within a population. Common examples include iodine-tagged common salt, vitamin A-containing oil, and iron-enriched rice all of which are examples of food fortification. In the agricultural field, food fortification (FF) and/or food enrichment (FE) is the most efficient strategy to overcome various micronutrient deficiencies by the addition of essential micronutrients (vitamins and minerals) to enhance the nutritional value of cultivated crops. According to World Health Organization (WHO) and Food and Agricultural Organization (FAO) of the United Nations (UN), “Food fortification” is defined as “the practice of deliberately increasing the content of an essential micronutrient, i.e., vitamins and minerals (including trace elements) in a food irrespective of whether the nutrients were originally in the food before processing or not, so as to improve the nutritional quality of the food supply and to provide a public health benefit with minimum risk to health” (Pant and Chinwan, 2014). “Fortificant” refers to the incorporation of substances in the food to provide micronutrients. “Micronutrients” refers to the important dietary components, including vitamins and minerals, that are required in very small amounts but are engaged in very critical roles in various body functions and disease prevention.

Previous Year Questions

1. What is food security? Why is it essential? Describe the current food security system in India. (10M, CSE 2022)

2. What is food security? Indicate the major constraints in food procurement and distribution. (10M, CSE 2017)

Difference Between Production and Productivity

• Production is total quantity produced in an area.

• Productivity is the quantity produced in one unit area.

• For example, total area is 10 hectares and the quantity produced is 15000 kg.

A series of efforts have been made to initiate the work on post harvest grain technology in India. The history of post harvest grain technology in India goes back as early as 1888 when COATS published several papers from Calcutta related to biology of stored grain pests. The first professional was appointed in the year 1905, known as Imperial Entomologist, Harold Maxwell Lefroy adorned with this post. Lefroy (1906) for the first time gave a tentative list of storage insects, which was further supplemented by Fletcher (1914). The problems of grain storage were discussed at the entomological meetings held at Pusa, Bihar in the years 1917, 1919 and 1923. The first step towards establishing an Institute in India was in the year 1950 when Central Food Technology Research Institute (CFTRI) was established at Mysore (Karnataka) with a mandate to train personnel and evolve technology related to food processing and preservation. The Central Warehousing Corporation was set up on 2^nd March 1957 under the Agricultural Produce (Warehousing and Development) Act 1956. The Food Corporation of India was established on 1^st January 1965.

In India, the farmers in traditional bulk and bag storage for food, feed and seed stored about 65-70 per cent of the total food grains and seed purposes till next harvest. Rest 30-35 per cent are procured and stored by food grain organizations, like Food Corporation of India (FCI), Central Warehousing Corporation (CWC), State Warehousing Corporations (SWCs), cooperatives, rural godowns and other state government agencies. In 1958, the Department of Food established a centre at Hapur known as Grain Storage Research and Training Centre (GSRTC) with the main objective to train the personnel of state government engaged in food procurement, storage and distribution. This centre was upgraded during 1968-1973 with the technical and financial assistance of UNDP and GSRTC and redesigned as Indian Grain Storage Institute (IGSI). The field stations at Ludhiana and Bapatla (later shifted to Hyderabad in March, 1979) were established in 1968-69. Subsequently, three stations were also established at Jabalpur (1980), Udaipur (1981) and Jorhat (1981).

Food Hygiene is a scientific discipline describing handling, preparation, and storage of food in ways that prevent foodborne illness. This includes a number of routines that should be followed to avoid potentially severe health hazards. Food can transmit disease from person to person as well as serve as a growth medium for bacteria that can cause food poisoning. Since food hygiene has a direct effect on the health of individuals patronizing the catering facility, it is obligatory on the part of the management to lay down definite guidelines for maintaining hygienic conditions and ensuring their proper implementation. Cleanliness should be the basis of all food hygiene programmes and should be aimed at food protection as well as improving and maintaining the quality of food.