eChapters

ABSTRACT

Myriophyllum aquaticum (Velloso) Verdcourt, commonly known as ‘parrot feather milfoil’ is the aquatic plant belonging to the family Haloragaceae. The plant gets the name ‘parrot feather’ from its feather-like leaves arranged around the stem in whorls of 4 to 6 giving it the value of a beautiful aquarium plant. It is a commercially valuable imported aquatic plant used in aquarium plant trade. These plants are exclusively females and as such no seeds are produced. Moreover, current macropropagation techniques are insufficient to produce sufficient propagules for the domestic and export market. Tissue culture techniques offer great opportunities in this regard and attempts were made for micropropagation of this valuable species. A viable protocol has been outlined for the in vitro mass multiplication of Myriophyllum aquaticum. Shoot regeneration was induced from nodal segments and leaves in half strength Murashige and Skoog (1962) medium supplemented with 1.0 mg l^-1 benzyl adenine. Incorporation of 0.2 mg l^-1 kinetin along with benzyl adenine in the culture medium resulted in a marked increase in the frequency (1:20) of multiple shoot formation. The in vitro raised plantlets were successfully rooted, hardened and planted out. The protocol is ready for commercialization.

ABSTRACT

Cultivated turmeric consists of fertile short duration types with a chromosome number of 2n=84. In vivo crossing was done between two short duration types VK 70 and VK76 to develop a high yielding variety with high curcumin and curing percentage. Seed set and seed development was obtained by in vivo stigmatic pollination. Hybrid seed germination was obtained under in vitro in dark on moist filter paper and the seedlings were micropropagated to establish a population of six plantlets /seedling with in a period of 10 months. The multiple shoots were obtained in the medium of half strength MS + 3 per cent sucrose+ BA 2.5 mg l^-1+ NAA 0.5 mgl^-1. Coupling conventional breeding with tissue culture reduces the breeding time.

Micropropagation /Clonal propagation

Micropropagation or clonal propagation is the growing of plants from meristematic tissue or somatic cells of superior plants on nutrient suitable media under controlled aseptic physical conditions. Sexually propagated plants (through generation of seeds) demonstrate a high amount of heterogeneity since their seed progenies are not true to type whereas asexual reproduction (by multiplication of vegetative parts) gives rise to genetically identical copies of parent plant. Thus, it permits perpetuation of the parental characters of the cultivars among the plants resulting from micropropagation. Micropropagation proves useful for propagation of: 

I. FILL UPS

1. _____ is the growing of plants from meristematic tissue (or) somatic cells of superior plants on nutrient media under controlled conditions.
2. _____ is a group of undifferentiated palnt cells.
3. Explants used is _____ in shape.
4. Meristem forms _____ at its cut end on which a large number of shoot primordia develop.

1. DEFINITION

Micropropagation is the growing of plants from meristematic tissue or somatic cells of superior plants on nutrient suitable media under controlled aseptic physical conditions.

The term micropropagtion is also known as tissue culture. Micropropagation refers to aseptic culture of various plant parts in artificial growth medium to produce new plant. This means is recently applied in propagation of horticultural crops e.g. Orchid, banana, strawberry, papaya, grape and many other plants.

Requirements for tissue culture: It includes basic facilities including equipment, asepsis, culture medium and culture environment.

• Basic facilities including equipment: Provision of working space, large sinks, washing machine to wash glassware, oven, dryers, dust free storage, space for glass house and chemicals, autoclave for sterilizing media, solutions, water culture and instruments, supply of distilled or deionized water and various essential instruments and appliances.

Basically we need to mount and prepare the slide for observation of various stages of EPN as detailed below in Table.1

The microscopic features reveals that wood is composed of minute units called cells. The fundamental differences between different kinds of woods are founded on the types, sizes, proportions, pits and arrangements of different cells that compose the wood. Softwoods have a simpler basic structure than do hardwoods due to the presence of only two cell types, and relatively little variation in structure within these cell types. Hardwoods have greater structural complexity because they have both a greater number of basic cell types and a far greater degree of variability within the cell types. In each case, however, there are fine details of structure that could affect the use of a wood.

The structure of a typical softwood is relatively simple. The axial or vertical system is composed mostly of axial tracheids, the radial or horizontal system and the rays, are composed mostly of ray parenchyma cells. According to estimates, 1 cubic metre (about 35 cubic feet) of Spruce wood contains 350 billion to 500 billion cells. The basic cell types are called tracheids, vessel members, fibres, and parenchyma

The structure of a typical hardwood is much more complicated than that of a softwood. The axial or vertical system is composed of fibrous elements of various kinds of vessel elements in various sizes and arrangements, and axial parenchyma cells in various patterns and abundance. Like softwoods, the radial or horizontal system are the rays, which are composed of ray parenchyma cells, but unlike softwoods, hardwood rays are much more diverse in size and shape.

The following tests are used for microscopic evaluation of semen: 
    
12.1    Sperm motility
12.2     Per cent Live sperm
12.3     Sperm concentration

12.1 Sperm Motility

The following two methods of estimation of sperm motility are followed in routine practice:
 
12.1.1    Mass activity
12.1.2    Progressive sperm motility
12.1.1 Mass Activity

Mass activity can be defined as ‘en-mass activity of the spermatozoa in the semen, immediately after collection’. Mass activity is generally assessed by vigour of swirls and waves motion in undiluted semen under 20 X magnification and expressed on 0 to 5 scale.

Microscope is the primary instrument of a microbiology laboratory and it produces enlarged images of small objects which are invisible by naked eye. With a microscope the operator can get a close view of minute structures which helps in examination and analysis. Examination of minute objects with a microscope is called ‘microscopy’. In microbiology, measurement of the microbial dimension observed under microscope is known as ‘micrometry’.

Types of microscopes

There are two types of microscopes i.e. light / optical and electron microscope depending on the sources of energy to create the image. The optical microscopes use the lenses and light (artificial or sunlight) to make an image. Following types of optical microscopes are available.

For visualization and identification of fungal specimens into their genus and species, the staining of the fungal specimens and their microscopy are necessary. The simple binocular microscope can be used for microscopy of the fungal specimens.

2.1. Stains to be Used in Microscopy

1. Methylene blue stain

2. Lacto phenol cotton blue stain

3. Crystal violet stain

4. Safranin

One of the major discoveries that gave birth to the field of microbiology was the development of instruments that could magnify, so that objects too small to be seen with the naked eye could be visualized. Robert Hooke in 1665, using an instrument with two sets of lenses (a crude compound microscope), was the first person to describe cells as life’s smallest structural units. In the early 1670s Anton van Leeuwenhoek used a simple magnifying lens to observe microbes he called ‘animalcules’ in rainwater, and was possibly the first person to observe microorganisms. The development of electron microscopes in the 1930s enabled magnifications of a further hundred times greater to be achieved.

A microscope can be defined as an optical instrument consisting of a lens or a combination of lenses for getting magnified images of minute objects. A simple microscope is essentially an ordinary magnifying lens held on an adjustable stand. It can give magnification up to 20 times the size of the object.

5.1 Introduction

According to Croxton and Cowden, “Either for one’s own use or for the use of other, the data must be presented in some suitable form”.

Now – a – days everybody uses tables in one form or another, and accountants use them quite often. The work become tedious, especially if you had to do for 12 columns for the 12 months of the year, and more so if there were some modification to be done after having set up the entire table. The Americans have a special name for such tables- spreadsheet which makes life easy.

Steve Jobs and Steve Wozniak two young Americans in 1976 AD developed the first desktop computer – The Apple which was not user friendly and needed programming for useful work. Dan Bricklin, Robert Frankston and Dan Fylstra proposed a program to turn the computer’s memory into a giant virtual spreadsheet where necessary corrections and modifications could be done fairly, quickly and easily and marketed the program in 1978 under the trade name VisiCalc. VisiCalc was soon succeeded by Sugercal and other computer programs which were more user friendly. The Lotus 1-2-3 designed and developed by Larry Kaplan put further step, which set the standard for many applications under the IBM, Now a days Microsoft under the leadership of Bill Gates had been working on the sidelines perfecting graphical user Interface (GUI) packages for the PC range of computers that would widen its reach. Now Microsoft office program Suite the integrated word processing, spreadsheet, presentation and data base management.

The spreadsheet package in Microsoft office is called Excel – our basic software, or program for this manual.

Abstract

In recent years microwave processing have attained increasing recognition in food industries particularly in drying and dehydration. During microwave processing, electromagnetic energy is supplied directly to the food material for volumetric heating. This provides rapid temperature rise throughout the material with reduced thermal gradients. This unique heating mechanism reduces processing time and saves energy. In-spite of advantages of microwave heating it leads to overheating in food material and formation of cold and hot spots if applied improperly during drying. To overcome these challenges different microwave assisted hybrid drying technologies have been developed by many researchers. These techniques are microwave assisted hot air drying, microwave assisted osmotic dehydration, microwave assisted vacuum drying, microwave- infrared assisted hot air drying, microwave assisted rotary drying. This chapter comprises the fundamentals of microwave and provides comprehensive update of microwave assisted hybrid drying processes for food and agricultural materials.

1. Introduction

Thermal processing used extensively in the food industry for preservation and shelf life extension of the products (Arnoldi 2001). Heat treatments remain most important in food processing unit operations, not only to achieve desirable changes in eating quality but also for preservative effect by inactivation of microorganisms, destruction of enzymes and insects.Heat is applied in various unit operations through adifferent mode of heat transfer such as conduction, convection, and radiations. 

Abstract

Hot air circulation is the most common industrial method of drying foods which has its own inherited disadvantages. Microwave drying can be an alternative method for removing moisture from foods and there has been a surge of interest in the application of microwave to process the foods, in past few years. The reason being that there is worldwide energy crisis and the growing acceptance and familiarity with domestic microwave ovens. It is well known that conventional means of heat processing irreversibly alter the flavor, colour, and texture of many foods. From the point of flavor alone, it is desirable to improve our present methods of processing foods. Some improvements have been made in this direction with a number of food products by use of high-temperature short- time processing.

A microwave oven, commonly referred to as a microwave, is a kitchen appliance that heats and cooks food by exposing it to electromagnetic radiation in the microwave spectrum.

1. Introduction
The amount of water present in the soil is called as soil moisture. The soil moisture availability is an important topic to study as it affects plant growth, agricultural outputs and the water resource management as well. The amount of soil moisture present in a place and in a time depends on the factors like soil type, Land use, vegetation cover of the place and evaporation taking place in that area at that time. The amount of water hold by the pores in the soil determines the soil moisture. This water holding by the soil depends on various factors like temperature, moisture levels, organic matters and the soil living organisms (Rasheed et al., 2022). Essential Climate variable (ECV) is very important to our planet which can be recognized by GCOS (Global Climate Observing System). Important sustainable development issues say drought, flood management, food security, ecological health and water resources are being impacted by the soil moisture. Soil moisture changes have also a role in evapotranspiration, rainfall, and the runoff distribution and intensities. (Zeng et al., 2023).
Soil moisture content (SMC) have a huge impact in shaping the water, carbon cycles of earth and energy balance in different scales of time and space. It is an important factor for the effective water management due to its influence on the precipitation, surface temperature and evaporation which will be affecting the processes say river runoff, vegetation health, and irrigation practices. The highcost traditional methods make to overlook for SMC in environmental modelling (Edokossi et al., 2020). The atmospheric and the land surface process are blinked by the key facto of SMC as said by Robinson et al. (2008). For gaining the knowledge on water, carbon cycles and energy as well as for studying extreme weather conditions, understanding soil moisture is very much needed. (Vereecken et al., 2014; Li et al., 2007; Seneviratne et al., 2010; Robock & Li, 2006).
Due to the soil moisture’s impact on the factors say when to plant, when to blossom and when to harvest the crop, soil moisture should be considered as the important factor as it is in improving the water resources and boost the agricultural output. Remote sensing methods like microwave remote sensing plays vital role in creating maps depicting the distribution of soil moisture spatially and temporally high resolutions. These maps help in effective crop planning, in-season drought assessment, irrigation and soil managements. The traditional methods like TDR probe, Soil moisture utilizing neutron probe and gravimetric methods are inefficient in studying the soil moisture with high spatial and temporal resolutions due to factors like Variations in terrain, soil type and land use pattern. We can overcome these and enhance our ability to map soil moisture in different scales through the recent advancements of microwave remote sensing (active and passive microwave remote sensing) which are having advantages like clear, accurate and timely measurements of soil moisture content.
Irrigation water sources are controlled through the soil moisture studies by executing the sustainable water management plans and by monitoring high yields despite the environmental changes, increasing water demands and climate changes. To predict the agricultural output, irrigation management, drought early warning, creating vegetation indices, soil moisture study with high temporal and spatial resolutions will be a key factor as it improves the crop stress reduction also which are the major driving forces of yield reduction (Doraiswamy et al., 2004). So, the soil moisture has a direct impact on the crop yield which are studied using variable rate technology say selective application of pesticides which can improve farmers financially as well as environmentally (Harris et al.,1964).

I. FILL UPS

1. _____ are capable of reducing the age induced damages and restoring the seed vigour by controlling free radical reactions.
2. _____ is the process of soaking the low and medium vigour seeds in water with or without adding chemicals to raise seed moisture and drying back for safe storage of seeds.
3. _____ treatment is similar to the moisture equilibration treatment.

Definition

Fracture of radius-ulna & tibia-fibula comes under middle level fracture.

Methods of Fracture Repair

External coagtation bandage along with thomas splint application.

Technique for Fracture Repair

Animal controlled with lateral recumbency with fractured limb upward.

Fracture of radius-ulna & tibia-fibula comes under middle level fracture. Pop caste application or bandage along with Thomas splint has been considered as standard method of repair.

The fracture site is immobilized extending between joint below and joint above level with either gum bandage or pop caste bandage (Fig.1).

Pop caste bandage is generally applied after 7 days. Hence gum bandage is preferred than pop caste bandage because of immediate application after occurrence of fracture (Fig.2).

For gum bandage application, a 8-16 layer thick cloth is wrapped over the fracture region covering the joint above & joint below of the site after liberal application of fevicol gum. The cotton cloth Is placed in position with few cotton thread knots (Fig.3).

4 bamboo splints are kept on the 4 sites of the limb over cotton padding. The end of bamboo splints kept padded to avoid skin damage. Splints are retained in position by thread with knots (Fig.4).

A 2^nd layer fevicol gum is applied over entire bandage & finally the entire bandage cloth is covered with bandage roll (Fig.5).

At the end the immobilized limb is over strengthened with Thomas splint (Fig. 6).

This chapter introduces the Mission for Integrated Development of Horticulture (MIDH) and its relevance to protected cultivation infrastructure. It explains the objectives, funding pattern, eligible components, cost norms and assistance available for nurseries, protected structures, flower cultivation, fertigation automation and postharvest facilities. The chapter also discusses the need for standardized greenhouse construction and relevant BIS technical standards. It provides practical reference information for growers, institutions and entrepreneurs planning protected cultivation projects with government assistance.

A neurotic headache, usually reflex in origin and paroxysmal in character.

The causes are many and varying in kind, making both the diagnosis and treatment the most difficult the general practioner encounters,

Migraine is clearly a hereditary condition, and the inheritance is passed down through the females rather than the males. Nervous abnormalities of the female generative organs are the most frequent of the exciting causes. Eye strain; shock; grief; worry; gastro-intestinal irregularities; mental emotions, i.e., anger, fear, love, jealously and remorse may cause migraine at one time and hysteria at another.

Many patients have lived, to suffer from the disease, for fifty years. On the other hand, many are permanently cured. The time needed to complete the cure will depend upon your ability to determine the tissue or organ, which is the cause of the disease, and the faithfulness with which the patient will follow directions.

Next to epilepsy, no disease so frequently presents premonitory symptoms as Hemicrania. These may be blurring of visions, flashes of light, balls of fire, etc.; chilliness; flashes of heat; dizziness; depression or excitation; confusion of ideas; numbness, etc. then comes the pain which is usually one sided, and may be any or all sensations, sharp or dull, continuous or intermittent, etc. There may or may not be tenderness of the affected part.

INTRODUCTION

The trend of rising unemployment is compounded by the existences of regional imbalances in development, within the country, which have collectively accelerated the phenomenon of migration. The history of migration is the history of people’s struggle to survive and to prosper, to escape insecurity and poverty, and to move in response to opportunity. In developing countries like India, migration mostly takes place not due to the so called the full forces of the destination place, as usually happens in case of developed countries, but because of poverty, unemployment, natural calamities and under development of the origin place. Migration in developing countries like India is still viewed as a survival strategy. In India internal mobility is critical to the livelihoods of many peoples, especially for people from rural areas. In the Dindigul District of Tamil Nadu, NREGA works have stemmed migration from many villages. Ministry of Rural Development (2006). It has been conceptualized that, creating job out of NREGA programme will check the migration of the people from one place to another. In Pusa block, of Samastipur district the NREGA is in operation for about two and half years. It is with this background the present article has been presented with the specific objectives toexplore the extent ofmigration check among NREGA beneficiaries, running in this block.

Introduction

Pastoralism involving rearing of different livestock species makes significant contributions to the economy of developing countries, both in terms of providing employment and income opportunities and in supplying nutrition to rural poor. Pastoralism generally has a mobile aspect, and movement of animal herds in search of fresh pastures and water is a key feature qualifying pastoralism. The term nomadic is used when mobility is high and in irregular patterns; transhumant when there are regular back-and-forth movements between relatively fixed locations; and sedentary for the rest. Pastoralists inhabit zones where the potential for crop cultivation is limited due to steep terrain, extreme temperatures and low and highly variable rainfall. Within this unpredictable, vulnerable and dynamic environment, they have developed successful mechanisms of adaptation to maintain an ecological balance between themselves and the natural environment. Thus, pastoralism is a successful strategy to support a population on less productive land that adapts well to the environment. Transhumance is the seasonal migration of livestock and pastoralists between higher and lower pastures.

BC

1750 The Sumerians brew beer.

500 The Chinese use moldy soybean curds as an antibiotic to treat boils.

250 The Greeks practice crop rotation to maximize soil fertility.

100 Powdered chrysanthemum is used in China as an insecticide.

AD: Before the 20^th Century

1590 The microscope is invented by Janssen.

1663 Cells are first described by Robert Hooke.

1675 Leeuwenhoek discovers protozoa and bacteria.

1745 Maupertuis proposes an adaptationist account of organic design

1797 Jenner inoculates a child with a viral vaccine to protect him from smallpox.

1802 The word “biology” first appears.

Year                    Milestones
1951    :    First amino acid was sequenced by F. Sanger and H. Tuppy.

1953    :    J.D. Watson and F.H.C. Crick proposed that DNA is a double helix.

1958    :    Discovery of DNA polymerase by Kornberg’s group and DNA replication studies began.

1959    :    Isolation of RNA polymerase.

Year         Milestones

1951       :    First amino acid was sequenced by F. Sanger and H. Tuppy.

1953    :    J.D. Watson and F.H.C. Crick proposed that DNA is a double helix.

1958    :    Discovery of DNA polymerase by Kornberg’s group and DNA replication studies began.

1959    :    Isolation of RNA polymerase.

1970    :    Discovery of reverse transcriptase showed that RNA can act as the template for the transcription of DNA and opened the way for cloning using cDNA libraries.

1970    :    General method was developed by M. Mandel and A. Higa for introducing DNA into cells by calcium dependent method.

1970    :    G.H. Khorana synthesized an artificial gene from DNA nucleotides.

1971    :    Restriction endonucleases for mapping DNA was first used by K. Danna and D. Nathans.

1972    :    The recombinant DNA Era begins. J. Mertz and R.W. Davis used T4 ligase to join DNA molecules.

Food adulteration is a global issue, and because there are insufficient regulations and oversight, developing nations are more vulnerable to it. But in many nations, food adulteration has gone unnoticed. Contrary to popular assumption, milk adulterants can, regrettably, present major health risks that result in fatal diseases. Modern milk adulteration involves increasingly complex techniques, necessitating state- of- the- art research to identify the adulterants. Because milk contains so many nutrients that are needed by both adults and infants, it is referred to as the ideal food. In terms of protein, fat, carbohydrates, vitamins, and minerals, it is among the best sources. Regretfully, milk adulteration is a very common problem worldwide. Potential causes could be the gap between supply and demand, the perishable nature of milk, the low purchasing power of the consumer, and the absence of appropriate detection tests. Because there is insufficient oversight and inadequate law enforcement, the situation is substantially worse in developing and underdeveloped nations. While quantitative detections of adulterants in milk are varied and complex, qualitative detections can be carried out simply using chemical reactions. The type of quantitative detection methods used depends on the milk’s adulterants.

Typical Adulterants in Milk

The addition of vegetable protein, milk from different species, whey addition, and watering are the main adulterants in milk that are known to be economically motivated. There is no serious health risk associated with these adulterations. Some adulterants, though, are too dangerous to ignore. Urea, formalin, detergents, ammonium sulfate, boric acid, caustic soda, benzoic acid, salicylic acid, hydrogen peroxide, sugars, and melamine are a few of the main adulterants in milk that have been shown to have serious negative health effects.

Liquid milk is the cheapest form of milk whereas value added products like yoghurt and paneer, already popular in India are ways to earn a higher income with some raw materials. Farms should focus on dairy herd improvement, herd management etc. Milk and dairy products are always very helpful to farmers for a constant source of income besides their regular farm products. They do not required to expend extra for their feeding if the number of cattle are less. With slight extra care they can earn enough to meet their daily expenses. Cows, buffalo, all the milk giving animals are easy to care.

5.1 Introduction

Waste from the dairy processing industry is generated through production of milk products at different stages. With diversification of dairy products, by-products have also gained some importance. Utilization of dairy by- products improves economical and nutritional aspects of milk production and reduces environmental pollution originating from dairy waste. Important dairy by-products include butter milk, ghee residues and whey, the major waste arising from production of cheese, casein, paneer and chhana. Whey arises as a result of protein coagulation/precipitation in the preparation of these products. It is used for manufacture of whey powder, whey drinks and lactose (milk sugar). Whey protein concentrates can be prepared by modern technological methods like ultra-filtration and reverse osmosis. Desi buttermilk is an important domestic beverage since olden days. Ghee residue can be utilized for manufacture of chocolate burfi, samosa filling etc. Hence, utilization of dairy waste particularly whey, butter milk and ghee residues obtained during manufacturing of various main products, has not only increased the availability of nutritional milk foods but has also indicated the profitable method of by products utilization and helped in minimizing the problems of pollution. This chapter focuses on utilization of these dairy industry wastes.

    1.    As per FSSAI, 2011 regulations, what is the fat and SNF content in buffalo milk
        a)    5 & 9    b)    6 & 8
        c)    6 & 9    d)    None
    2.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  cow milk
        a)    4 & 9    b)    4 & 8.5
        c)    6 & 9    d)    None
    3.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  standardized milk
        a)    4 & 9    b)    4.5 & 8.5
        c)    6 & 9    d)    None

Importance

The dairy products, which have originated in India, are called indigenous dairy products. The products can be broadly classified in to khoa based and channa based. The importance of the dairy products were known to Indians since time immemorial or it could be roughly estimated to be around five thousand years ago and the development could be considered as an art.

Introduction

There has been a considerable progress in the overall production in the dairy sector. Without a proper marketing, the country would not attain the expected rate of growth in dairy farming. Marketing is a flow of goods and services from producer to consumer and users. In this process the activities include moving the goods from the point of production to the point of consumption. The activities like creation of time, place, form and utility are involved. According to Philip Kotler, marketing as a human activity directed at satisfying the needs and wants through exchange process. The performance of the trade activities involved in the f low of goods and services affect the marketing efficiency and producers share in the consumer rupee. A marketing system consists of different milk marketing channels. That marketing channel is considered good in which producer get the highest share in consumer rupee and consumer share is highest in producers rupee. The interest of the Producer is to get the highest possible returns from their milk. Between them, there are marketing intermediaries or middlemen who perform various marketing functions like transporting and retailing. All the intermediaries/ middlemen are also interested to make highest profit from the milk business. The present lesson provides information on the economic aspect of marketing of milk and milk products through a empirical study conducted in Rajasthan state.

1. Ethyl alcohol content in alcoholic beverages is determined by Pyknometer Method or SG (Hydrometer) Method (after distillation). %Alcohol (v/v) = 8610.6 – (16584 x SG) + (7973.3 x SG 2)
2. 1 ml of 0.05N NaOH is equivalent to 0.00375 g of tartaric acid.
3. Volatile acidity of alcohol drinks is measured in terms of as acetic acid. 1 ml. of 0.05N NaOH is equivalent to 0.003g of acetic acid.
4. Esters in alcohol drinks is expressed as ethyl acetate gms. per 100 liters of abs. alcohol. 1 ml. of 0.1N NaOH is equivalent to 0.0088g of Ethyl acetate.
5. Esters in Higher alcohol drinks is expressed as Amyl alcohol gms. per 100 liters of abs. alcohol.1 ml of 0.1N NaOH is equivalent to 0.0088g of Amyl alcohol.
6. The concentration of Higher alcohol g/100L is determined by spectrophotometer method using p-dimethylaminobenzaldehyde solution by reading the % T or Absorbance (OD) of developed colour of samples and series of standards in spectrophotometer at 530/535 nm against reagent blank as reference.

The significance of milk in human nutrition is now well established as it is considered as the best, ideal and complete food for all age groups. However, in spite of being so, milk can also serve as a potential vehicle for transmission of some diseases under certain circumstances. Moreover, by virtue of possessing almost all the essential nutritional factors, milk can also serve as an excellent culture and protective medium for certain microorganisms, which may include potential pathogens capable of causing serious health problems to the consumers. In this way, milk may serve not only as a vehicle of transmission of disease causing organisms, but it can also allow these pathogens to grow, multiply and produce certain toxic metabolites, thereby making itself an extremely vulnerable commodity from public health point of view.

24.1 Introduction
A dairy by-product can be described as a valuable commercial product generated during the production of a primary dairy item. Examples include skim milk, buttermilk, residual ghee, and whey, as depicted in the diagram below. Utilizing these by-products not only enhances plant profitability but also makes essential nutrients accessible to humans while reducing environmental pollution from dairy waste. However, converting these edible substances into non-food items is often unjustifiable, particularly in regions facing milk shortages. Effective management of by-products is crucial for ensuring profitable dairy operations, as every component of milk offers significant nutritional value that should be preserved. Consequently, there is growing global interest among researchers in maximizing the utilization of these by-products. Nonetheless, it’s important to note that while many dairy by-products can technically be processed into useful commodities, feasibility alone does not justify their widespread utilization. If capital and resources are to be assigned to a plan to utilise by-products, their processing must be economically viable. Therefore, it is essential to prioritise the research and development of cost-effective technologies for the improving and utilisation of dairy by-products. A dairy by-product can be described as a commercially valuable product generated during the production of a primary dairy product. Examples include skim milk, buttermilk, ghee residue, and whey, as illustrated in the diagram below. Utilizing these by-products enhances operational efficiency, provides essential nutrients for human consumption, and mitigates environmental pollution from dairy waste. However, converting edible materials into nonfood items may not be justifiable, particularly in regions facing milk shortages. Profitable dairy operations depend significantly on effectively managing by-product disposal. Every component of milk should be processed wisely to preserve its nutritional value. Consequently, there is growing global interest among researchers in optimizing the utilization of these by-products. Nonetheless, while it may be technically feasible to process any dairy byproduct into useful goods, it doesn’t necessarily mean it should be done.

Carbohydrates are polyhydroxy derivatives of aldehydes or ketones and undergo all the organic reactions common to the carbonyl groups and hydroxyl groups. The principal milk carbohydrate is lactose. It is a disaccharide. Hydrolysis of lactose with enzyme β-galactosidase yields glucose and galactose.

Lactose is the major carbohydrate present in all types of milk. The first record of isolation of lactose was in 1663, by Bartolettus by evaporation of whey. Milk contains only trace amounts of other sugars, including glucose, fructose, glucosamine, galactosamine, neuraminic acid, and neutral and acidic oligosaccharides.

Lactose plays a significant role in milk and milk products that are

• It plays a major role in the production of fermented dairy products.

• It contributes to the nutritive value of milk and milk products

• It affects the texture of certain concentrated and frozen products;

• It is involved in heat-induced changes in the color and flavor of highly heated milk products.

Status of Lactose

Lactose content varies extensively in the milk of different species. Breed of animal, individuality factors, udder infection, and especially the stage of lactation regulates the lactose content in milk. The lactose concentration in milk decreases gradually and significantly during lactation; this behavior contrasts with the lactational trends for lipids and proteins, which, after a decrease during early lactation, increase significantly during the second half of lactation. Lactose synthesis is hampered during mastitis. Lactose, along with sodium, potassium, and chloride ions, plays the principal role in controlling the osmotic pressure of the mammary system. Thus, any change in lactose content is compensated by a change in the soluble salt constituents. The osmotic relationship between lactose and soluble salts during the secretion of milk partly explains the presence of high lactose in milk with a reduced ash content and vice versa (Table 1).

Background
Milk is known as a whole food for human consumption. It is the first food of the newly born human mammals. Milk contains almost all the nutrients required for the patients, the elderly, pregnant mother and new born baby. There is no doubt that milk plays a significant role in human development. We can prepare many physical forms of milk like cheese, yogurt, ghee, and milk powder. The calcium content is higher in buffalo than in cows. Buffaloes are the second largest source of milk and produce 15 % milk. Higher biological value proteins, fat, soluble vitamins, fatty acids, amino acids, water-soluble vitamins, and calcium are all present in milk. The main antioxidant components of milk and milk products are sulfur, phosphate, zinc, and amino acids like cysteine (necessary to produce collagen).
Milk somatic cells are normal cells found in milk in small amounts (epithelial cells), some of which are leukocytes (white blood cells). When mastitis is infected or injured, leukocyte production rises. Milk with a low SC level produces superior milk products that last longer. Better milk management, better cleanliness, and correct nutrition all contribute to a decrease in milk SC, which indicates poor milk production hygiene and a cause of mastitis. Milk somatic cells are made up of both immunological and milk-producing cells. In terms of defense, somatic cells are the second line. During the routine process of milking, these cells are secreted in milk. Somatic cell count is a good tool for evaluating farm cleanliness in bulk milk and is utilized worldwide as an indication of udder health in individual milk. The most prevalent condition affecting dairy buffalo production and their health and well-being is mastitis. The somatic cell count consists of immune cells (75%), such as neutrophils, macrophages, lymphocytes, erythrocytes, and epithelial cells (25%). Investigators have made different attempts to exploit milk somatic cells as a potential non-invasive sample to diagnose early pregnancy udder health in bovines.

Milk is the one food for which there seems to be no adequate substitute. It constitutes almost the entire diet for the young of all mammals. Each species produces milk that is especially adapted to the growth of its own young, but milk from one species may be used as food for others. Since animals were domesticated centuries ago, the milk from various species such as cow, buffalo, goat and camel, has been used in the diets of people throughout the world. Only cows milk is of commercial importance in the United States, although small amounts of goat’s milk are sold.

Whole cow’s milk is approximately 88 percent water, 5 percent carbohydrate, 3.5 percent protein and 3.3 percent fat. Its nutrient content varies from species to species, from breed to breed, seasonally and even from the beginning of the milking to the end of the process. In the United States it is cow’s milk that is used commonly as a beverage and in food preparation. Therefore the milk discussed throughout this chapter is cow’s milk.

Physical Properties of milk
Procedure: Collect different types of market milk samples and study the  properties of milk. Boil the milk and note down the properties given in table 1 and record the observations

Types of Enazymes in milk

1. Endogenous and 2. Exogenous.

Three sources of enzyme in milk:

1. The blood via defective mammary cells.

2. Secretory cell cytoplasm. Some of which are occasionally entrapped with fat globules by the encircling MFGM.

3. The outer layer of MFGM is probably the principal source of endogenous enzymes in milk. The outer layer of MFGM is derived from the apical membrane of the secretory cell which in turn originates from the Golgi membrane and acts as the principal source of enzyme in milk.

General Characteristics of Milk Enzymes

1. Deteriorative character e.g. lipase (commercially most important enzyme in milk), proteinase, acid phosphatase, xanthine oxidase.

2. Preservative enzymes. e.g. superoxide dismutase, sulfhydryl oxidase.

3. As an indicator of the thermal treatment history of milk. Related enzymes are alkaline phosphatase, ϒ glutamyl transpeptidase, and lactoperoxidase.

4. Mastitis infection indicator. Related enzymes are catalase, n-Acetyl-β D-glucosaminidase, and acid phosphatase.

5. Antimicrobial activity.

6. Commercial source of ribonuclease and lactoperoxidase

Common Milk Enzymes and their Role in Dairy Industry

Abstract

Vitamin D or “sunshine vitamin” is an essential fat soluble vitamin required for healthy bones. It is responsible for enhancing intestinal absorption of calcium and phosphate. Its deficiency leads to osteoporosis and osteomalacia in adults and rickets and other bone deformities in children. Vitamin D deficiency is being reported to be quite common these days due to modernization accompanied with changes in lifestyle and environmental pollution which limit sun exposure for several individuals. Inadequate sun exposure results in reduced vitamin D synthesis and ultimately poor vitamin D status necessitating compensation through dietary intake. Dietary vitamin D intake is very low in India because of low consumption of vitamin D rich foods, absence of fortification and little use of supplements. It is becoming a major public health problem, needing immediate attention. Fortification of milk and milk products is the safe and effective approach to deal with widespread vitamin D deficiency as milk is consumed and liked equally by all age groups. This paper highlights the importance, sources, recommended allowances and other relevant issues related to vitamin D fortification and its health effects.

Homogenization is now a widely used industrial process in dairy production, essential for stabilizing milk and other liquid dairy products. Its main purpose is to prevent fat from separating out of the milk, ensuring a smooth, consistent, and uniform product. Milk is a complex emulsion comprising water, fat, proteins, carbohydrates, minerals, and vitamins. Among these constituents, fat plays a critical role in determining the texture, flavor, and overall sensory quality of milk and dairy products. In its natural state, milk fat exists in the form of globules of varying sizes, surrounded by a thin membrane that stabilizes them in the aqueous phase. These fat globules typically range in size from 2 to 10 μm and have a lower density than the surrounding water-based phase of milk. This difference in density causes the fat globules to rise and form a cream layer when milk is left undisturbed, leading to an uneven texture and separation during storage.
Homogenization is a mechanical process applied to milk to modify fat globules by forcing the milk under high pressure through a tiny orifice. This reduces the average size of the fat globules while increasing their number and surface area. Practically, this greatly minimizes the tendency of fat globules to rise and form a cream layer. The enhanced stability of homogenized milk is due to three key factors: the reduction in the average diameter of fat globules, as described by Stokes’ Law, which slows their upward movement; the uniformity in size distribution, which ensures globules rise at similar speeds, preventing clustering; and the increased density of fat globules caused by the adsorption of a protein membrane, bringing their density closer to that of the surrounding liquid. Additionally, heat pasteurization complements homogenization by breaking down the cryo-globulin complex, which otherwise promotes clustering and cream formation.
The smaller and uniformly dispersed fat globules create a smoother, creamier texture and enhance the mouthfeel. This process also contributes to the visual appeal of milk, making it appear whiter and more uniform. Homogenization is, therefore, an essential step in modern dairy processing, ensuring the stability, quality, and consistency of milk and other dairy products, while addressing the challenges posed by the inherent properties of milk fat and its lower density.

Milk impaction in neonatal calves is a condition characterized by the improper digestion or accumulation of milk in the abomasum, leading to digestive disturbances, discomfort, and potential health complications for the calf. This condition is most commonly seen in newborn or very young calves; typically within the first few days to weeks of life, as their digestive systems are still developing and may be more susceptible to dysfunctions. Causes of milk impaction
Several factors can contribute to milk impaction in neonatal calves. Understanding these causes is essential for prevention and treatment. The primary causes are:
1. Overfeeding or undigested milk: One of the most common causes of milk impaction is overfeeding, where the calf is fed more milk than it can digest properly. Overfeeding can overwhelm the capacity of the
abomasum, leading to a backup of undigested milk. Undigested milk in the stomach can ferment, creating an acidic environment that may disrupt normal digestion and lead to impaction.
2. Inappropriate milk temperature: Milk fed to calves should be at the proper temperature, usually between 38-39°C (100-102°F). Milk that is too cold can cause a delay in the digestive process and lead to impaction, as it may not be digested as quickly as milk at the ideal temperature. Similarly, milk that is too hot can cause digestive stress or irritation.

The first use of milk in a solid chocolate product is commonly attributed to Daniel Peter in 1875. Milk chocolate is the most popular type of chocolate, and milk ingredients are critical in delivering the highly desired properties and taste profile to consumers. Milk ingredients also have a significant effect on chocolate processing.

Milk is one of the most complex raw materials used by the food industry. A typical bovine whole milk has a solids content of about 13.5%, comprising about 3.4% protein, 4.6% fat, 4.7% lactose and 0.7% minerals.

Milk proteins can be classified as either caseins or whey proteins - typically found in milk

Introduction

There are manypeople all over the world who have a certain level of sensitivity or intolerance towards milk and milk products. The reactions to milk which involve the immune systemare termed as milkallergy, whereas, difficulty in the digestion of the milk and milk products is known as milk intolerance. Milk intolerance occurs due to malabsorption of milk sugar (lactose) in intestine, a condition in which lactose is not digested into its monomers (galactose and glucose) due to lower activity or insufficiency of lactase enzyme. Inability to digest lactose, which is a disaccharide present only in milk, is specifically known as lactose intolerance. However, hypersensitivity involves the adverse immune reaction(allergic reaction) inthe body causeddue to the ingestion of milk proteins. Milk and milk products are major source of basic as well as essential nutrients and cannot be skipped from the diet of the individual. It is a rich source of calcium,which is essential for the growth and reformationof bones. The decline in calcium may lead to thin, fragile bones that break easily, a condition called osteomalacia or osteoporosis in women. Thus, it is a matter of concern for both children andadults whoare allergic or intolerant towards milk and milk products and not getting enough calcium and other nutrients in diet. This chapter would provide more insight about milk intolerance and milk allergy/hypersensitivity and how to deal with it.

India

Milk legislation and regulations are designed to prevent fraud and adulteration. But they now cover many factors that affect sanitation and public health. Milk generally is classified into grades according to the care with which it is produced.