eChapters

Any abnormal condition, which affects the normal functioning of cells, tissues, organs and any other system in an individual, is called a disease. In all living organisms, including plants, animals, birds and humans, diseases can be caused due to infectious or non-infectious agents and various other factors. Laboratory tests may identify organisms directly (eg, visually, using a microscope, growing the organism in culture) or indirectly (eg, identifying antibodies to the organism). Some tests (eg, Gram stain, routine aerobic culture) can detect a large variety of pathogens and are commonly done for many suspected infectious illnesses. However, because some pathogens are missed on these tests, clinicians must be aware of the limitations of each test for each suspected pathogen. In such cases, clinicians should request tests specific for the suspected pathogen (eg, special stains or culture media or advise the laboratory of the suspected organism(s) so that it may select more specific tests. The main causative factors of diseases in humans include internal factors, genetic irregularities, allergies, poor immune system, external factors and a lot more.

Several diagnostic techniques are employed to asses the nutrient status of the crop. These are helpful in determining specific or multinutrient stresses and quantity of nutrients needed to eliminate the stress. Some of the techniques commonly used are:

Visual deficiency symptoms

Plant analysis

Rapid tissue testing

True /False

Q.1.    A diagnostic test enables the doctors to reach at a decision whether the patient is suffering from a particular disease or not.
Q.2.    The recent developments in the field by biotechnology have led to the development of many new medical tests.
Q.3.    The general principles in designing and conduct diagnostic test studies are not known well.

X-ray Machines
 
There are many factors to consider when choosing X-ray equipment. The need of an individual practice varies depending on the species majority and case work load.
Types of X-ray machines: 
X-ray machines can be grouped into 3 categories:

I. Portable X-ray Machine

    ·    Is one that can be carried to the animal.
    ·    Portable X-ray machines are widely used in veterinary practice.
    ·    The maximum output is 15 to 35 mAs and kV ranges from 70-110 kVp.
    ·    Cost is less and easy to move around and transport. 
    ·    Suitable for X-raying of thin and small parts (limbs below stifle and elbow of large animals and can be used taking 
X-rays of abdomen an skeletal systems of small animals).

Section-A : Write True / False

Q.1 A better and more beautiful way to present the data in a more visual form can be done by means of diagram.

Q.2 Description of data through diagrams and graphs is better for layman.

Q.3 Diagram does not register a meaningful impression almost before we start to think about it.

Q.4 Diagrams are never used by the business man and government agencies for advertisement and educating people.

Q.5 Diagrams do not give visual presentation of data.

Q.6 The diagrams put a rememberance for a longer time in mind of human being.

Q.7 Diagrams facilitate comparison and reveal pattern of data.

Q.8 Diagrams show approximate values of items in data.

Q.9 Diagrams are more attractive, appealing and impressive than tables.

Q.10 Diagrams can be more easily compared and interpreted than the tables.

Q.11 Tables contain precise figures while diagrams indicate approximate figures.

Diagrams and graphs are the effective and attractive ways of presenting data. Widely used diagrams for data presentation are pi chart and bar diagrams. Bar diagrams are also of various types; (i) Simple bar diagram (ii) Component or sub-divided bar diagram (iii) Multiple bar diagram (iv) Percentage bar diagram. The widely used graphical presentation are histograms, frequency polygon and frequency curve.

There are numerous libraries to create charts and graphs in R programming language.

Pie-chart- A pie-chart is a representation of values of variable as sectors of a circle with different colours/shadings. The colours/shadings used for different sectors are indexed at the side of the graph. pie() function is used to create pie chrt in R.

Let us create an exel file names as ‘exp_sports’ which contains the expenditure made (in Rs.) under various sports in a sports club. The name of the sports are cricket, hockey, tennis and football. The names of sports are placed under the column head ‘sports’. The corresponding expenditure (in Rs.) are 7200, 3600, 1800, 1800 and they are placed under the column head ‘expenditure’.

The basic syntax for creating a pie-chart using the R is.

Diagrammatic Presentation of Data

The quantitative data when classify are converted into averages and if the number of average is large then it is not possible to draw a conclusion from their large numbers of averages. Moreover quantitative data are dull, confusing, boring for many of us. Therefore, a statistical device to make such confusing data more attractive was developed i.e. if such complex data are presented by geometric f igures, pictures, graphs or curves then it will become more attractive and more impressive, is called as diagrammatic representation of data. These diagrams are nothing but the use of geometrical figures to improve the overall presentation and offer visual assistance for the reader.

Types of Diagrams

Generally, diagrams are made for a special series or a time series and they are divided into five different categories:

1) One dimensional diagrams

2) Two dimensional diagrams

3) Three dimensional diagrams

4) Pictograms

5) Cartograms

4.1 Diagrammatic Representation of Data

Diagrams are meant only to give a pictorial representation of the data with a view to make them readily intelligible. Several types of diagrams are used for the presentation of data in biological and agriculture sciences. The following are the important types of diagrams in common use :

1. One-dimensional diagrams
2. Two-dimensional diagrams
3. Three-dimensional diagrams

Introduction
Plant breeding, according to Sansern et al. (2010), is the process of genetically altering plants to meet human demands. Prehistoric humans in various parts of the world domesticated only a small number of the hundreds of thousands of species that were then available. They did this by genetically altering these species’ components, which entailed both conscious and unconscious selection as well as differential reproduction of variants (Allard, 1999). A relatively small number of plant species have evolved over many years of trial and error to become the backbone of agriculture and, consequently, the world’s food supply (Mackay, 2001). This method of domestication includes the identification of specific valuable wild species along with a system of selection that resulted in alterations in the quality and quantity of cultivated crops.The modifications brought about by domestication involved altered organ size and shape, loss of many survival traits, such as bitter or toxic substances, the disintegration of seeds in grains protective structures, such as spines and thorns, seed dormancy, and change in life span increased for crops grown for roots or tubers and decreased for crops grown for seed or fruit. The domestication process followed mostly by mass selection (selection by bulking preferred kinds) is a potent method for facilitating quick changes while preserving genetic variability in the population (Okporie and Obi 2002).
Populations can exist in constantly changing surroundings due to genetic variation. More variation increases the likelihood that certain individuals in a group will have allele variants that are appropriate for the environment. Those individuals have a higher chance of survival to have offspring which carry that allele. Because of their success, the population will endure for additional generations. Selecting the best parents to utilize in artificial crosses is one of the key concerns for plant breeders since it encourages the expression of the largest genetic variability and the production of superior recombinant genotypes. The objective of plant breeding is to simultaneously improve all the desired traits. This task is complicated by correlations between various traits, which may result from pleiotropic genes, physical chromosomal links between genes, or population genetic structure. Choosing one feature will alter associated qualities, sometimes in a positive or in a negative way. As a result, selection may result in unexpected modifications, provided they fall within the typical range of variations seen in the crop and are therefore thought to be useful to consumers or the environment. Breeding practices in the 20th century improved a variety of genetic techniques, including methods for identifying and preserving more genetic diversity, creating variable populations for selection, and testing how to differentiate between the effects of genes and the environment. Naturally self-pollinating plants like soybeans or tomatoes, naturally cross-pollinated plants like maize, and plants whose vegetative propagation (typically cross-pollinated) allowed the direct fixing of improved types, all required different precise steps in the production process (Ubi, 2013).

Dialysis
 
The main purpose of dialysis in biological research is the removal of small molecular weight (M.W.) constituents from biological fluids. This is achieved by dialysing the material in a cellulose tubing with a pore size of 40-80 A0 (4-8mm) diameter which allows the passage of compounds with molecular weight less than 10,000. The following is the procedure followed: cut the length of the dialysis tubing depending upon the volume to be processed. Open the sides of the tubing with a flow of distilled water and transfer it to a boiling water bath. Do not allow the tubing to dry as it will distort the pore size. Make a bag by tying a knot at one end of the tubing. Transfer the solution to be dialysed into the bag. Tie another knot at the top of the bag. The bag is then put in a beaker containing the solution against which dialysis is to be carried out. In general, one volume of the desired solution is dialysed against 50-100 volumes of buffer. The total period of dialysis could range from 8-48hr. The efficiency of dialysis could be increased by stirring and changing the dialysate solution at frequent intervals.

Key Points

• Neonatal diarrhea can be lethal without treatment.

• Administer aggressive fluid and electrolyte therapy to address newborn diarrhea.

• Fecal examination and/or culture findings can help control diarrhea.

• Ringer lactate is the preferred fluid.

• There is a high association between animal age and the presence of the causal factor for diarrhea.

Introduction

Diarrhea is one of the symptoms of a variety of medical problems. Diarrhea is characterized by an increased frequency of defecation and stools of varied consistency, which may have an increased concentration of water or a decrease in dry matter content. Increased peristaltic movement causes an increase in caudal flow of ingesta/GIT content, resulting in a decrease in intestinal transit time and thus diarrhea. Diarrhea is lethal in children; therefore, preventing f luid and electrolyte losses prior to diagnosis is critical to saving lives.

Many non-spore-forming, anaerobic, Gram-negative bacteria cause opportunistic mixed infections, often in association with facultative anaerobes. Synergistic interactions between the organisms in these mixed infections are common. Fusobacterium species and bacteria formerly referred to as Bacteroides species account for more than 50%of the anaerobic organisms isolated from these infections.
Usual Habitat
Nan-spore-forming, Gram-negative anaerobes are often found on muwus membranes, particularly in the digestive tract, of animals and man. They are excreted in the faeces and they can survive for short periods in the environment. Dichelobacter nodosus, a primary pathogen of the epidermal tissues of the hoof region of ruminants, survives for less than 4 days in mud. Diagnostic Procedures
In order to ensure that isolates of anaerobes are aetiologically significant, specimens for isolation procedures should be obtained by direct sampling from discharges or lesions and by supra pubic puncture in urinary infections. Specimens should be processed promptly after collection. Commercial kits and transport media are available for specimens from suspected anaerobic infections. In the core of a tissue specimen over 2-3 cm, an anaerobic microenvironment is usually maintained. Samples of fluid in a syringe remain suitable for anaerobic culture if air is expelled from the syringe and the needle
is plugged.
Anaerobic jars with an atmosphere of hydrogen and 10%CO2 are used for incubating cultures at 37°C for up to 7 days.

8.1 Introduction to Dictionary in Python

A dictionary is a collection which is unordered changeable and index. In python dictionaries are written within curly brackets, and they have keys and values. Means the dictionary contains two things first is the key and the second is the value.

8.1.1 Create and Print a Dictionary

Example

dict1={‘brand’:‘Suzuki’,‘model’:‘dzire’,‘year’:2020}

print(dict1)

Accessing items: you can access the items of a dictionary by referring to its key name, inside square brackets.

Example

Accessing items: there is also a method called get() for the same task.

dict1={‘brand’:‘Suzuki’,‘model’:‘dzire’,‘year’:2020}

print(dict1)

y=dict1.get(?model”)

print(y)

Abstract

The electromagnetic processing instruments such as microwave is very commonly used at house hold level, hence understanding the behavior of food as well as factors affecting its dielectric properties becomes important. Dielectric properties (DEP) play an important in electromagnetic processing of food products and mainly depend upon the moisture content, physical properties, composition, temperature and power applied. Different methods have been used to determine the DEP of food material including parallel plate, coaxial probe, resonance cavity, transmission line and free space method. The selection of these methods is again based on several factors such as type of materials, accuracy of measurement, the scope of the research, frequency range, availability of equipments and resources. Present study thus summarizes the importance of DEP of food, influencing factors and the different measurement techniques.

Diet plays an important role in the management of diseases. It is very much true in the management of dogs with heart failure also. Managing the diet of a dog with heart failure is depending on the severity and stage of heart failure and presence / absence of concurrent diseases as well deficiencies.

Introduction

Fiber is that part of plant food which is not digested when eaten. Since it is not absorbed into the body, dietary fiber is not a nutrient. Nevertheless, fiber is a very important component of a healthy diet. Fiber, also called “roughage” helps prevent constipation, hemorrhoids and diverticular disease. Some types of fiber have a cholesterol-lowering effect, which could lead to reduced risk of heart disease.

Dietary fiber has been defined as plant cell wall material resistant to the intestinal secretions of the host. This definition gives the appearance of precision and allows gravimetric and chemical measurements. However, a proportion of other non-fibre dietary constituents (e.g, retrograded starch, protein, and fat) pass along the gut, without absorption or metabolism, to the caecum. Chemical analysis or quantitative measurements of the fibre content of specific diets do not allow prediction of their biological action. The physiological effects of dietary fibre depend predominantly on physical properties unrelated in any simple or direct way to chemical composition. Quantitative measurement of dietary fibre does not allow for diverse effects on nutrient absorption, sterol metabolism, fermentation in the colon, and stool weight. We still do not know whether to restrict the definition of “dietary fibre” to non-starch polysaccharides or to include related materials such as resistant starch, lignin, and the complex assemblies typical of plant tissues, where polysaccharides occur in close association with other molecules. An alternative to defining fibre in terms of chemical composition would be to develop measurements of physical properties relevant to physiological action in the intestine. This approach could be extended to other polymeric constituents, in particular proteins (ingested and secreted) and mucous glycoproteins.

Polysaccharides are the main constituents of dietary fibre and show a wide spectrum of physical, properties that reflect the nature and extent of intermolecular association. Dietary fibre can be likened to a water-laden hydrated mass passing along the gut. Physical properties that influence function are a combination of the rheological and colligative properties of the water-soluble fibre components, the surface characteristics of the water-insoluble components, and the network properties of the swollen hydrated components. Such features include viscosity, water holding, cation exchange, organic acid adsorption, gel filtration, and particle size distribution.

Introduction

In India, per capita cereal consumption has been declining since the early seventies, despite a significant increase in per capita cereal production (Radhakrishna and Ravi, 1992 and Rao, 2000). Cereal consumption per capita per month fell from 15.35 kgs in 1970-71 to 12.70 kgs in 1999-2000 in rural area and from 11.40 kgs to 10.40 kgs in urban area during same period. It might be due to shifting of consumers’ choice from food to non-food items; from cereals to non-cereals within the food group and from course to fine cereals within the cereal group. The decline in cereal consumption has been higher in the rural area due to development of rural infrastructure and availability of job opportunities which ultimately helped in improving their level of income (Rao, 2000). Despite spectacular growth in food production during last 30 years the problem of malnutrition still persists across different regions in India because increase in food grain supply alone cannot conquer hunger and malnutrition.

The consumption pattern and nutritional status have also experienced a significant change during last two decades in Bihar. Cereal consumption per capita per month has declined from 476 gms in 1983 to 455 gms in 19992000. The situation is more alarming in poor households who constitute about half of rural population in north Bihar. There is lack of research on consumption pattern, nutrient intake and nutritional status based on household data, particularly in context of Bihar. In view of the above observations the present study is undertaken to analyze the consumption pattern and nutritional status of poor households in north Bihar.

Abstract

The concept of functional foods has received significant media attention and, as a result, interest has focused on the need for research into the non- nutrient constituents of food plants. This has enabled market penetration of functional foods containing increased amounts of bioactive food compounds or physiologically active nutrients and non-nutrients within food that impart proven health benefits. Functional foods can take many forms. Some may be conventional foods with bioactive components that can now be identified and linked to positive health outcomes. Some may be fortified or enhanced foods, specifically created to reduce disease risk for a certain group of people. Numerous observational studies have shown that omega-3 fatty acids enriched diets are associated with a reduction of cardiovascular mortality, heart attack and sudden death. In several studies, a higher fish intake has been associated with decreased incidence of coronary artery disease (CAD) and cardiovascular mortality. A trial revealed that fish oil supplementation of 130 mg/kg of body weight each day decreased the number of stiff joints, duration of morning stiffness, pain and global arthritis activity. Many supplements contain active ingredients that have strong biological effects in the body. The bioavailability of nutrients within a given food is governed by the composition and microstructure of the food, commonly referred to as the food matrix. More specifically, numerous studies investigating the development of functional foods have shown that the interactions between nutrients and non-nutrients within the food matrix can be synergistic, additive, or neutralizing in nature. The preventive and curative effects of the functional foods on health concludes it to be integral components of established public health programs to reduce the risk of specific diseases.

7.1 Introduction

In this chapter, process, outcome and impact evaluation of the vegetable integrated pest management programme (IPM) implemented in the subtropical area of the Jammu region of Jammu and Kashmir (J&K) state during 2008-09 and 2009-10 was studied. There are many research designs employed for impact evaluation. These include one group before and after comparison design, one group time-series design, non-equivalent control group design and ex-post facto research design. Social scientists most often used before and after IPM (longitudinal) comparisons, with and without IPM, and control group (latitudinal) comparisons, and a combination of the two (longitudinal and latitudinal). A robust measure of the impact of a programme, however, is the difference-in-differences (Ashenfelter and Card, 1985) quasi-experimental design, a statistical technique used in econometrics and quantitative sociology to determine the difference between the treatment (with) and control group (without) over time. The difference-in-differences quasi-experimental design, also called double difference (DD), used to compare the treatment (with IPM) and control group (without IPM) over time. The objective of our quasi-experimental empirical study was to determine the impact of the vegetable IPM programme on the adoption of non-chemical pest management practices, pesticide use, and field use environmental impact in the sub-tropical region of the J&K state. Difference-in-difference quasi-experimental control group design (with/without, before/after) was used to compare the changes before and after the IPM programme between the IPM trained farmers and the non-IPM farmers. The DD model was employed to identify the impact of the IPM programme on the adoption of non-pesticide IPM practices, pesticide use by weight (a.i.), pesticide use frequency, farmers’ knowledge regarding safe use and handling of the pesticides, and field use environmental impact to address the bias introduced by a non-random sampling procedure as the farmers from FFS were selected intentionally (Table 1). The DD model also eliminated the in-built, systematic or seasonal effects other than the training effect.

Pharmacy and Therapeutics Committee
The Pharmacy and Therapeutics (P&T) Committee is a vital component of healthcare institutions, particularly in hospitals. It serves as a formal body that oversees medication management processes, ensuring that drug therapy is safe, effective, and cost-efficient.
Objectives of the Pharmacy and Therapeutics Committee
1. Formulary Management

• Definition: The formulary is a continually updated list of medications approved for use within a healthcare institution. It serves as a guide for prescribers regarding which medications are available and recommended for various conditions.
• Objective: The primary objective of the P&T Committee in formulary management is to ensure that the formulary reflects the most effective and safest therapeutic options based on clinical evidence. This involves evaluating new drugs for inclusion and removing outdated or less effective medications.
2. Drug Selection
• Rationale: The committee aims to specify preferred drugs and alternatives based on clinical guidelines and evidence-based practices. This helps minimize therapeutic redundancies and ensures that healthcare providers have access to optimal treatment options.
• Process: The selection process involves reviewing clinical studies, safety data, cost-effectiveness analyses, and recommendations from professional organizations to make informed decisions about drug inclusion.
3. Quality Assurance
• Importance: Quality assurance is critical for patient safety. The P&T Committee monitors medication use within the hospital to identify trends in prescribing patterns and potential safety issues.
• Monitoring Activities: This includes reviewing adverse drug reactions (ADRs), medication errors, and compliance with formulary guidelines. The committee implements corrective actions when necessary to improve safety outcomes.