eChapters

Abstract

Cattle are reared for milk and dry periods are considered loss to the exchequer of livestock farmers. To avoid it, farmers mostly abandon the cattle to become stray animals. Latest research supports that cow dung and urine are endowed with versatile medicinal, biofertilizer and bio-pesticide properties of socioeconomic importance. This has given the concept of dry cattle farming where focus is utilities of cow dung and urine and their value added products. Cow urine is useful for numerous human ailments like, cancer, osteoarthritis, allergies, kidney failures, skin diseases, healing of wounds etc. Cow dung is main source for vermicompost, FYM and biogas. Many products containing cow dung and urine i.e. soap (23% cow dung content and 7% urine), toothpaste (10% cow dung content and 10% urine, 2% Ghee), floor cleaners (Gaunyle: 11% cow urine), hair oil, incense shaving cream, face wash, talcum powders and dark circle removers are available in the market. The term cowpathy has been coined for diverse uses of cow dung and urine and is now focal area of research and innovative products development. Further, the dry cattle farming offers solution to problems of stray animals and helps in empowering the women farming community to exploit dry farming for more profit, product development and economic strengthening.

1.1. Dry farming (Dryland farming)

Cultivation of crops in a region where the annual rainfall is more than 750 mm.

Semi arid crops with growing period of 75-120 days.

Crop failure is less frequent.

Moisture conservation practices are necessary.

3.1 Indian Floriculture Industry

Indian floriculture industry has been shifting from traditional flowers to cut flowers and dry flowers for export purposes. The liberalized economy has given an impetus to the Indian entrepreneurs for establishing export oriented floriculture units under controlled climatic conditions. About 60,000 ha area is under floriculture at present. During nineties, increasing demands for flowers in world market was coupled with production technology available abroad for high quality flowers. This encouraged some entrepreneurs to establish export-oriented units in Hyderabad, especially for the production of long stem rose by importing cultivars and adapting green house technology.

Dry flowers are naturals, dried and preserved with an everlasting value the can be cherished for longer period. According to APEDA investigations, dried flowers accounted for 15% in the total floriculture export during 1988-89 and increased to 64% in 1994-95. Export value of dried plants and planting materials increased from Rs. 109.21 million in 1993-94 to Rs. 364.55 million in 1995-96.
 
India exports dry flowers to U.K., Germany, Italy, The Netherlands, U.S.A., Japan and Singapore. Dry flower production is labour intensive, provides self-employment and job opportunities for a large number of workers and aids in development of subsidiary industries. The industry has many advantages.

Soil is the top layer of the earth surface in which plants can grow, consisting of rock and mineral particles mixed with decayed organic matter and having the capability of retaining water. Soil is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life. Earth’s body of soil, called the pedosphere, has four important functions

The dry matter content of feed samples and other materials is expressed on three aspects as fed, partially dry, and dry.

As fed refers to the feed as it is consumed by the animal, the term as collected is used for materials which are not usually fed to the animal, that is, urine, faeces, etc. If the analysis on a sample is affected by partial drying the analyses are made on the as fed or as collected sample. Similar terms: Air dry, that is hay: as received: fresh; green and wet.

Partially dry, reports to a sample of “as fed” or “as collected” material that has been dried in an oven (usually with forced air) at a temperature usually about 60ºC of freeze-dried and has been equilibrated with the air; the sample after these processes would usually contain more than 88 percent dry matter (12 percent moisture); some materials are prepared in the way so that they may be sampled, chemically analysed and stored. This analysis is referred to as “partial dry matter” percent of “as fed” or “as collected” sample. The partially dry sample must be analysed for dry matter (determined in an oven at 105ºC) to correct subsequent chemical analyses of the samples to a “dry” basis. This analysis is referred to as “dry , percent of partial dry sample similar term - “Air dry” is also used.

Dry matter is generally defined as the constant  weight a sample  attains when heated at 100ºC (occasionally 150ºC). This definition , suitable for inert materials such as sand, has three main lacunae when applied to biological materials.

    1.    In these materials, water is present in various states ranging from extraneous moisture  as rain or dew, through water present in cell sap, water present in various physico-chemical and chemical combinations.

    2.    Biological materials contain active respiratory enzymic systems which continue to function during the early stages of drying; in fact, as the material heats up, activity will be enhanced until it is stopped either  by denaturation of the enzymes or by desiccation. Besides altering the chemical composition of the material, such activity will  lead to loss of dry matter.

    3.    Most biological materials contain organic  compounds which are volatile at 100ºC and which are, therefore, lost on drying. This leads to an under-estimation of dry matter content, for example, in the case of faeces, silage and molasses.

Partitioning of assimilated carbon among sink organs is a critical factor that controls the rate and pattern of plant growth. Environmental stress often restricts resource availability while successful acclimation sets in motion processes that restore the supply. A key mechanism contributing to regulation of carbon partitioning is an expression of genes that control activity of the enzymes which initiate sucrose metabolism at specific sites and stages of ontogeny. Drought stress not only limits the size of the source and sink tissues but the phloem loading, assimilate translocation and dry matter portioning are also impaired. However, the extent of effects varies with the plant species, stage, duration and severity of drought. Crop production faces many challenges, due to changing environmental conditions and evolving needs for new plant-derived materials. 
The extreme temperatures those are consequences of present-day global climate changes are considered as major abiotic stresses for crop plants. Temperatures exceeding the limits of adaptation substantially influence the metabolism, viability, physiology, and yield of many plants. Plants exposed to extreme temperatures often show a common response in the form of oxidative stress. However, the extent of damage caused by extreme temperatures depends greatly on the duration of the adverse temperature, the genotypes of the exposed plants, and their stage of growth. Numerous research findings support the notion that induction and regulation of antioxidant defenses are necessary for obtaining substantial tolerance against environmental stress. Plant adaptation to either high temperature or low temperature is a multigenic response which is very complex in nature. Plant response to continuous light depends on plant tolerance and can be modified by alteration in temperature, light intensity, CO2 level, and other environmental factors.

Introduction

Pulses are a part of healthy and balanced diet and have special importance for vegetarians in fulfilling their daily requirements for body proteins. Low productivity in pulses is due to nutritional deficiency in soil and imbalanced external fertilization (Awomi et al., 2012). Nitrogen (N) is more important as it is essential component of amino acids and proteins. It fixes atmospheric N of about 35 kg ha-1 by the help of symbiotic Rhizobium, a soil bacterium (Movalia et al., 2020). Globally, Rhizobium and Bradyrhizobium can fix approximately 175 x 106tons of N every year which is higher than the annual total chemical N fertilizer production of 30 x 106tons (Hidayatullah et al., 2016). The element molybdenum (Mo) is crucial for functions of nitrogenase and nitrate reductase, the two important enzymes that act as catalyst for N fixation. These two enzymes work properly in presence of Mo as nitrogenase contains Fe-Mo and Fe-Fd proteins, and N fixation cannot take place without these proteins (Hidayatullah et al., 2016).

Introduction
India is the seventh largest having 329.73 million ha of geographical area and second most populous country having more than a billion population in the world. There is no other substitute other than to use every square inch of land and every drop of water effectively and efficiently. Though there was markedly increase in annual food grain production from 51 (1950-51) million tones t0 206 million tones (2000-01), still the death on hunger is visualized.
The demand for food is increasing with ever-increasing population growth rate. So there is no option other than to increase food production. There is very little or no scope of horizontal expansion due to land limitation, the question of vertical expansion is the only way to fit with the situation. Genetically improved crop variety, hybrids, mechanized agriculture, higher rate of fertilizers and chemicals application may give one or two more green revolution, but the question lies how far it can sustain greenness?
Adoption of improved crop cultivars, cropping system, increasing cropping intensities, precision farming can hold good to get out of this situation where whole system is to be considered.
The cropping intensities in the states like Assam, Bihar, MP, Orissa, UP and West Bengal are 137.7, 137.8, 125.6, 154.6, 148.6 and 159.6 percent, respectively (FAI,1994-95). This indicated that a vast majority of lands remain fallow during dry season due to lack of proper technologies, which are under rainfed conditions, neglected. Except West Bengal, more than half of the arable land remains fallow during rainless period. Increasing cropping intensities in rainfed uplands is not easily achievable but there is great potential of intensification of cropping in rainfed lowland by utilizing natural resources and conserved residual moisture. Pulses like black gram, green gram, lentil, lathyrus, chick pea and oilseeds like linseed, groundnut, rapeseed could not only increase the cropping intensities but also come forward to increase national productivity.

12.1. Introduction

Drying refers to the method of removal of moisture content from the food to a level at which the activities of food spoilage and food poisoning micro-organism are inhibited. Drying under open sun is probably the oldest method of food preservation used for agricultural crops including food grains, oilseeds as well as fruits and vegetables. Most of the fruits and vegetables contain enough moisture to permit the activity of enzymes and micro-organisms for spoilage and drying is necessary to reduce the water activity. Therefore, reduction in water activity of the food is the main principle of preservation by drying. Two commonly used terms for dried foods are low moisture foods and intermediate moisture foods (IMF). During drying, a single layer of fruit and vegetables, either whole or sliced after primary pretreatments is spread on trays which are placed inside the dehydrator or in the open sun for drying. In mechanical dehydrator, the initial temperature is generally kept at 43oC which is then gradually increased to 60-66oC for vegetables and 66-71oC for fruits.

Drying/ Dehydration means the process of removal of water.

Drying : Removal of water (moisture) by using non conventional energy sources like Sun or wind.

Dehydration : Process of removal of moisture by the application of artificial heat under controlled conditions of temperature and / or humidity and air flow.

Drying- Removal of water from product by influence of non conventional energy source like sun and wind.

Dehydration- Process of removal of moisture by the application of artificial heat under controlled condition of temperature, humidity and airflow etc.

Advantage of dehydration over sun drying

The process of dehydration is much more rapid than sun drying.

Dehydration requires less floor area.

Dehydration is done under very hygienic condition.

Sun drying is not possible in cloudy weather or during rain while dehydration or mechanical drying is not dependent on weather.

The colour of dehydrated or mechanically dried fruit and vegetable remain uniform due to uniform drying temperature.

6.1 Introduction

In general, the terms drying and dehydration are interpreted as the removal of moisture from a food product. Removal of moisture from a food product offers an excellent protection against most common causes of food spoilage. The drying or dehydration process achieves such protection by reducing the moisture content of the food product to levels which are adequate to limit microbial growth or other adverse chemical reactions. During drying, heat and mass transfer occur simultaneously (Figure 6.1). Heat is transferred from the bulk gas phase (i.e. hot air used for drying) to the solid phase (i.e. food product to be dried), where part of it is utilized for vaporization and the remainder is taken up by the solid phase as sensible heat. Mass (i.e. moisture of food product) is transferred in the form of vapour through various resistances, first from the interior of the solid to the surface, then through vaporization at or near the surface and finally in transport of the vapour into bulk gas phase. Dehydration is the removal of moisture close to bone dry condition.

Abstract

Cocoa and coffee are highly sought after commodity crops in the market owing to the distinct flavor and aroma characteristics. Cocoa beans are mostly used in the manufacturing of chocolates and various types of confectioneries while coffee is mainly consumed in the form of beverages. Both cocoa and coffee need to be dried and roasted in order to produce the flavor precursors which further develop into the desired flavor and aroma in the finished products. This chapter aims to provide an overview of cocoa and coffee processing with particular emphasis on drying and roasting aspects and its impact on product quality.

Drying by Embedding

A desiccant is simply a substance with a high affinity for water which can be used as a drying agent. Embedding the flowers in a granular, desiccating material is probably the most commonly used method and many consider it the best all around method. Several materials are used as drying agents. All the agents used vary in cost and in the results they produce. It is important to use the correct procedure when covering the flowers so that their form is maintained. Most well known is silica gel, but also clean dry sand can be used. Usually an airtight container is used; the flower heads are placed in the drying mixture face up, and very carefully covered with the mixture. The container must be kept closed during the drying process. After 4-14 days, depending on the thickness of the flower, the flower will be dry.

Drying is basically the unit operations which is used in many of the food industry nowadays. It can be desirably known as the process of removing moisture to relent a hard products. It is the transfer of energy source, mostly it derives heat from the outer environment to the dryer in which the food products is placed.

Introduction

While experimenting with chemicals, sometimes we need to dry the chemical/ solution (solid, liquid or gas) using a process like evaporation or distillation, mainly to remove water or different solvents. Drying is the process of evaporation or distillation to remove water/solvent from a solution, solid or even from gas. Generally, a drying agent (usually an anhydrous inorganic salt) is used for this process, which reacts with the water (present in the chemical/ solvent to be dried) to form a hydrate. For example, anhydrous MgSO4 is one of the drying agents. The drying agents are recognized by their capacity (the rate at which they absorb water) and their intensity (the amount of water left behind in the solvent at equilibrium). No chemical reaction or change in phase occurs during the drying process.

Type of Solvents

Apart from water (a universal solvent), there are three families of organic solvents used in laboratories.

1) Oxygenated solvents: Alcohols, Ketones, Glycol ethers, Glycol esters, etc.

2) Hydrocarbon solvents: Aliphatic and Aromatic hydrocarbons.

3) Halogenated solvents: Chlorinated hydrocarbons.

Dried Leaves

Leaves are dried or preserved to capture the beauty of spring and hold it for a long time. Dried leaves are beautiful when used in any decoration. There are several preserving techniques that help to enhance the prized collection of leaves well. Drying leaves is an age old tradition. Leaves were dried to preserve them. The leaves were picked for their medicinal qualities, fragrance, or to be used as spices and for their decorative value. Leaves can be preserved by various ways: 

Dehydration (or drying) is defined as ‘the application of heat under controlled conditions to remove the majority of the water normally present in a food. The main purpose of dehydration is to extend the shelf life of foods by a reduction in water activity. This inhibits microbial growth and enzyme activity, but the processing temperature is usually insufficient to cause their inactivation. Therefore any increase in moisture content during storage, for example due to faulty packaging, will result in rapid spoilage.