eChapters

Cost of Cultivation

The expenditure incurred from sowing to harvest including the field preparation can be worked out and expressed in Rs. ha^-1.

Gross Return

Total income obtained from multiplication of unit cost of main product as well as byproducts and its total yield and expressed in Rs. ha^-1.

Net Return

Net return is obtained by subtracting cost of cultivation from gross return and expressed in Rs. ha^-1.

Net return = Gross return – total cost of cultivation

6.1 Introduction

Urbanization is now a global phenomenon, but in developing countries the implications are more pronounced. Natural growth of population, reclassifications of habitation and migration trends are important in urban population in India. The population of India, which accounts for 27 per cent of the total population, was 285 million according to 2001 census. International experience shows that the pace of urban development accelerates when a country’s urban population crosses close to 25 percent of the total population (like in India).(Kumar and Chakrabarti, 2010). 

Weaning to 210 days: Weight in kg of feed consumed for producing one kg of live weight for the period from weaning to 210 days of age.
10 Mortality percentages (as percentage)
Pre-weaning mortality: No. of piglets died during the period birth to weaning (28/56 days) the number of piglets born alive.
Post weaning mortality: Number of piglets died during the period from 28/56th to 365 day to the total number of piglets available at weaning.
Adult mortality: Number of adult pigs died to the number started at one year (in percentage).
List of registers to be maintained:
• Birth register
• Youngstock register
• Adult stock register
• Disposal register
• Mortality register
• Weighment register
• Farrowing and growth record
• Service register
• Boar performance register
• Sow performance register
• Veterinary register
• Feed efficiency register
• Account register

There are certain inherited traits (characters) in various species of livestock which are economically important. These traits have to be improved for increased production like milk, meat, egg, wool, etc.

Livestock manure is principally composed of organic material. When this organic material decomposes in an anaerobic environment, methanogenic bacteria produce methane. These conditions often occur when large numbers of animals are managed in confined areas (e.g. dairy, swine, and poultry farms, and beef feedlots, where manure is typically stored in large piles or disposed off in storage of lagoons or tanks).

Manure management will always be a part of livestock production. Management practices will have a significant impact on the environment regardless of the size of the operation. Producers who make wise manure management decisions help to maintain a healthy environment now and for generations to come. To reduce the risk of air or water quality damage from manure, understand how manure impacts air and water quality, keep the public in mind when locating, expanding or maintaining a facility, reduce the amount of material entering the waste stream, collect and store manure to preserve nutrients and minimize gas/odour emissions, apply manure to fields in a way that most fully utilizes the available nutrients, follow compositing to increase manure value, establish bio-gas unit as an alternate energy source and for the electricity generation and if possible integrate with fish production to augment income.

Based on the observations a model system of waste management was designed by systematic and scientific integration of a bio-fuel unit, settlement and slurry processing unit, aerobic composting, traditional composting, and preparation of value added products like Panchagavya, Jeevamritham, packed dried dung and fresh cow urine. There were no reports of odour or water pollution from nearby water sources. The overall results of the waste management indicated that this integrated system can be recommended as a model for waste management in dairy enterprises with beneficial effects on economic efficiency, environmental hygiene and quality control.

INTRODUCTION

The terms agro-forestry and farm forestry are used interchangeably in India with respect to the establishment and/or management of trees on farms for productive purposes. It also particularly recognizes the use of trees and shrubs on farms to support agricultural production, protect soil and water resources, enhance biodiversity, sequester carbon, and improve landscape values. Lundgren (1982) defined “Agroforestry as a collective name for land use systems and technologies where woody perennials are deliber-ately used on the same land unit as agricultural crops and/or animals, either in some form of spatial arrangement or temporal sequence. In agroforestry systems there are both economical and ecological interactions between the different components”. It has been proposed that including a tree component within the farming system, either on bunds and boundaries (sequentially with crops) or intercropped in an agroforestry type configuration, can lead to increased land productivity while diversifying the farming enterprise (Atta-Krah et al. 2004; Huxley 1999; Young 1989), and increase economic security for small farmers (Russell and Franzel 2004).

Abstract

Three seepage tests were carried out for an earth canal at Rawakeeb Research Station (RRS)-west of Omdurman and an average seepage rate of 3.4 m/day was obtained. This value suggests that irrigation canal at RRS should be lined. In addition to that preliminary economic evaluation showed that canal lining is imperative in RRS. A concrete slab form was well designed for lining of RRS canal. Precasting technique and construction technique provided the required water tightness. Economic evaluation was done for RRS canal to investigate the extent of occurrence of supposed advantages, and to estimate costs and benefits and rate of return to lining. The capital expenditure (C), net present worth (NPW) and benefit/cost ratio were found to be 2600.4, 1961.9 and 1.3 respectively which offers a good indicator to adopt the technique.

4.1 INTRODUCTION

India enjoys a wide range of climates and agro-meteorological zones which are suitable for growing various kinds of horticultural crops like fruits, vegetables, f lowers, spices and condiments, plantation crops, and medicinal and aromatic plants.

India is the largest producer, consumer and exporter of spices in the world. India stands second both in production of fruits and vegetables next to China. China contributes 21.2% in the world fruit production whereas India produces 12.6%. When we think of vegetables, China produces 49.5% and India produces 14.09%. India is the largest producer of Mango, Banana, Papaya, Coconut, Arecanut, and Cashewnut in the world. In the country, Andhra Pradesh (13.0%) is the leading state in fruit production followed by Maharashtra (11.2%). In case of vegetables, Uttar Pradesh stands first occupying 15.1% share followed by West Bengal and Madhya Pradesh in the range of 14.6% and 10% respectively. In cut flower production West Bengal ranks first.

Total horticultural production for the year 2017–18 was 311.71 million tonnes from cropping area of 25.43 million hectares of land and an estimated production for the crop year 2018-19 is 314.87 million tonnes from an area of 25.6 million hectares.

8.1 Economic Geology and Ore Mineralogy

8.1.1 Economic geology

Economic Geology deals with the comprehensive study of mineral deposits including their processes of formation and uses. By applying the principles of geology, a mining engineer is able to exploit such deposits profitably for the use of Man.

8.1.2 Ore mineral

An ore is a term applied usually to that part of a metalliferous mineral deposit that can be utilized profitably as a source of one-or-more metals, this term now is widely used for the usable part of many non-metallic (non-metalliferous mineral) deposits, like barite, fluorite, sulphur, etc.

8.1.3 Gangue mineral

An ore is usually a mixture of one or more usable minerals (ore minerals) and one or more unusable minerals (gangue minerals). The usual gangue minerals are quartz and other forms of silica, calcite, dolomite, siderite, barite, feldspars, garnet, chlorite, kaolin, fluorite, apatite, pyrite, pyrrhotite, arsenopyrite, and sometimes the gangue material is the country rock or host rock itself in which the ore minerals occur. Sometimes, the gangue minerals may also be utilized as by-products of the ore deposit. The nature and proportion of the gangue influence the economic value of an ore to a great extent.

Introduction

Any project is undertaken and an investment is made with expectation of realizing benefits out of it. This applies to projects both in the private domain as also in the public domain. Hence, it is imperative to assess the benefits derived from the project investment over its entire economically viable. The extent to which project contribute to various aims of development (benefits) and make use of scarce resource (costs) can differ widely. A proper project preparation requires an assessment of the various benefits and costs associated with execution of a project. Methods to determine, analyze and assess the relevant benefits and costs of a project are known as cost-benefit analysis. The cost- benefit analysis ensures that all the relevant factors that contribute to a project’s net benefits are systematically taken into account, whether they relate to an individual, a firm, a social group, the public sector or the country as a whole.

There are many tools or criteria for the financial evaluation of projects. However, the important and commonly used evaluation criteria are simple Rate of Return, Payback Period, Net Present Worth, Benefit- Cost Ratio and Internal Rate of Return.

Economic appraisal and evaluation helps the decision makers who are saddled with the responsibility to prioritize measures in a situation with enormous needs and quite limited resources. Government planners as well as donor agencies are all in need of enough data in order to make rational choice or decision in selection of investment alternatives. Most of the economists believe that economic analysis cannot give the final answers. There will always be lack of data, uncertainty about the future, disagreement on the methods, and similar issues. However, economic analysis, if properly done, can indeed be of much help to decision makers.

9.1 ECONOMIC LOSSES DUE TO ANIMAL DISEASES

Economic considerations are increasingly forcing their way forward in the decision-making processes of animal health management. With the continuing intensification of livestock production systems, the economic implications of livestock diseases have become increasingly important at both farm and national levels, as they represent avoidable waste of scarce resources (McInerney, 1988). From an economic point of view, an animal disease either destroys the basic resources, reduces the attainable output, dwindles the efficiency with which the resources are converted into products, or decreases the economic value of products (McInerney, 1995).

The effects of a disease present in an animal or herd may be manifested by stunted growth, lowered production, delayed maturity, delayed conception, mortality, reduced resource (especially feed) use efficiency, etc. These negative impacts of a disease demand more resource(s) than usual, resulting in higher expenditures for the same output and reduced farm income. Apart from these negative effects at the farm or herd level, animal diseases lead to economic losses at the regional, national, and global levels too by increasing animal mortality, reducing productivity, increasing disease control costs, swelling losses in animal trade, decreasing the market values of livestock and their products, and ultimately ending at food insecurity. These economic impacts of livestock diseases, besides their social impacts, have now been recognized globally, in both developed and developing countries, necessitating quantification of the economic impact of animal diseases as an urgent and important step to support the prevention and control decisions for improved animal health to ensure better rural and global economy.

Fishes are used by human beings in different forms from time immemorial millions of human beings suffer due to hunger and malnutrition and fishes from a rich source of food, which has following importance:

1) Fish is an excellent food for mankind is more easily perishable than cattle, sheep and chicken.

2) Fish flesh is easily digestible by child and man.

3) Fish flesh has very great nutritive and medicinal values.

4) Fish flesh contains proteins, bass, vitamins, waters and minerals.

5) All the essential required amino acids are present in the fish flesh.

6) Fish flesh contains proteins about 13-20 % and it is easily digestible and nutritional.

7) Fish flesh is highly perishable commodity constituted as 60-80 % water.

8) Fish flesh contains about 1-8 % fats or oils and it is more important value of fishes.

47.1 Introduction

Fish are one of the most important groups of vertebrates and have always been a significant species in man’s life, influencing it in a variety of ways. Fish are highly valued in human civilization for their food, cooking, and nutritional value. They have significant economic, nutritional, medicinal, industrial, aesthetic and religious values, and they employ millions of people worldwide. Several species are sought after as luxury foods in high-end restaurants. They help to ensure food security in many parts of the world by serving as a valuable supplement to varied and nutritious diets.

1. Introduction

Horticultural crops have emerged as a cornerstone of India’s agricultural sector, wielding substantial influence over the nation’s economic landscape. Comprising an extensive range of fruits, vegetables, ornamental plants, plantation crops, spices, and medicinal herbs, this sector has witnessed remarkable growth and transformation in recent years. The significance of horticultural crops extends beyond sheer economic value, permeating various facets of Indian agriculture and socio-economic development (Ravichandra & Ravichandra 2014).The unique agro-climatic diversity of India allows for the cultivation of an unparalleled variety of horticultural produce, contributing to its global prominence as a horticultural powerhouse.

Introduction

Salinity is a significant abiotic stress faced by plants, particularly in semi-arid and arid regions of the world, where annual evaporation exceeds precipitation. In addition, approximately half of all the world’s irrigated areas are subjected to secondary salinization, alkalization, and waterlogging. About 8.85 million ha of land in India is degraded due to salinity and alkalinity problems. Besides the naturally occurring salt-affected soils, the extent of man-made salinized soil is also significant. Salt accumulation in the root zone layers of soils becomes a major constraint to agricultural productivity. However, such lands can effectively be utilized for salt-tolerant biological systems.

To survive under high salt concentrations, some plant species evolved well adapted morphological and physiological characteristics, allowing them to proliferate in saline environments. These species are known as halophytes. Halophytes constitute a small fraction of total plant species; they represent a wide diversity of plant forms and habitats and are of immense significance in expanding salinity problems and decreasing freshwater supply for agriculture. These salt-tolerant species possess enormous taxonomical plant forms and habitat diversity. Taxonomically, the species belonging to Poaceae, Cyperaceae, Chenopodiaceae, and Asteraceae families constitute a significant share of salt tolerant species of north-western hot arid regions of India. In the herbaceous plant group, the species of the family Poaceae are most abundant. In the case of woody perennials, Chenopodiaceae, Tamaricaceae, and Salvadoraceae families are essential as true halophyte and facultative halophyte species.

The vegetable crops like knol-khol, Broccoli and kale belong to the genus brassica of the cruciferae family. They are essentially cold weather, hardy crops and thrive best in cool moist season. These crops, if grown under warm conditions, the produce become pungent due to development of glucocide called sinigrin containing sulphur. According to Chowdary (1967), the crops of this group have developed from wild cliff cabbage, also known as cole wrots, from which the name cole has been given. Their taste founds to be more sweat in hills due to low temperature and constitute at top in the list of preference vegetables for people all over India.

This chapter attempts to describe the cultivation of these three cole crops, exclusively grown in hills of India.

Knol-Khol

Knol-khol (Brassica oleracea var. gonylodes) is a well known green–leafy vegetable, which is consumed with leaves and knobs. It is popular among Kashmiri people and the people of hilly areas. Its cultivation is confined to Jammu and Kashmir, Himachal Pardesh, West Bengal, Uttranchal and Punjab. Due to its year round demand and conducive agro-climate available in J&K, it can be cultivated round the year. The crop is of short duration and be grown three to four times a year. Thus it gives very high productivity per unit area.

After assessing the prevalence or incidence of the disease concerned, the next step is to quantify the economic losses due to that disease by classifying and presenting all the information available on the losses, expressing these in monetary values, and identifying and quantifying the indirect losses attributable to a disease, to the extent possible. Usually, most of the negative effects of diseases can be conveniently estimated in terms of reduced output, mortality, reduced weight, delayed maturity, and treatment cost, directly. However, quantifying the indirect effects of the disease will be complex, but it is not impossible.

As we saw earlier, the economic impacts of animal diseases can be measured using statistical / epidemiological methods and economic methods. Economic methods of disease loss estimation include the Gross Margin Analysis, Enterprise Budgeting, Equi-Marginal Principle, Partial Budgeting, Cost Benefit Analysis, and Decision Analysis.

INTRODUCTION

Farming acts as the primary occupation of majority of the population in India. According to National Sample Survey Estimate, about 49% of the Indian population is dependent on agriculture and allied industries (GOI, 2014, CIA, 2012) making it the largest source of employment to the people of India. Although, being a second largest food producing country in the world (Sarkar, 2009), the contribution of agriculture to the GDP has been declining. The contribution of agriculture to Indian GDP has declined from 30% in 1991 to 15% in 2011-2012 to 13.7% in 2013 (Economic Survey. 2013-2014). This decline is also accompanied by a decline in the participation of people in Indian farming sector. In fact between 2001 and 2011 about 9 million people have quit farming, which is about 2 million more than the decline noted in the previous decade (GOI, 2011). This figure equates to about 2035 farmers quitting farming per day. The recent census (GOI, 2011) also highlighted that for the first time in four decades an absolute decline (about 7%) in the cultivators has been noted.

During the last visit of Barak Obama in the year 2011, he pointed out that India is fortunate to have a youth population with a half of the total population being under the age of 30-35 years. Out of 600 million young people, over 60% live in villages and majority of them are educated. Mahatma Gandhi considered that migration of rural youth from villages to town and cities as the most serious form of brain drain affecting adversely rural India’s development. The National Commission on Farmers stressed the need for attracting and retaining rural youth in farming. Recently, National Sample Survey has indicated that over 45% people want to quit farming under these condition there is need to persuade educated youth including farm graduates to stay in villages and take up agriculture as a profession. There are various economic opportunities for farm graduates which are discussed below:

21.1 Cost Principle

 We know that

 TC = VC + FC

 and Net Revenue = TR-TC.

In the short run, gross revenue (G.R.) must cover the V.C. The maximum net revenue is obtained when MC = M.R. If GRs VC, the guiding principle should be to keep increasing production as long as MR > M.C. In the short run, MC = MR point may be at a level of input use that may involve a loss instead of profit. Yet at this point, the loss will be minimised.This situation of operating the farm when MR > AVC but