eChapters

Reproductive Organs of Fowl and Formation of Egg

The reproductive system of a hen is a fascinating and intricate setup designed to produce one of nature’s most perfect foods-the egg. Understanding this system requires a look into its two primary components: the ovary and the oviduct.

The Ovary

The ovary is where the magic begins. A hen typically has two ovaries, but in most cases, only the left ovary develops fully and remains functional. The right ovary, although present, becomes rudimentary and non-functional. The left ovary is responsible for the formation of ova, the initial stage of the egg.

Inside the ovary of a hen are approximately 2000 visible yolk-filled ova. These ova are the potential eggs, each waiting to be developed and released. As a hen matures, these ova progress through various stages of development. The transformation from an immature pullet, which has a small, undeveloped oviduct weighing about 1.1 grams, to a mature pullet ready to lay eggs, involves significant changes. By the time a pullet lays her first egg, her oviduct has grown to weigh around 77.2 grams.

11.1 Introduction

Egg contents may be contaminated via vertical or horizontal paths. In the former, bacteria may colonise the ovaries and/or oviduct, whereas in the latter, pollutants, such as faecal matter or dust, travel through the shell and colonise the membranes and yolk. The surface of a nest-fresh egg provides minimal protection against bacterial pollutants, resulting in the dominance of Gram-positive Micrococci in the shell microflora. Nonetheless, a variety of conditions have been demonstrated to either increase the survival of bacteria in the unfriendly environment of the egg’s shell surface or to impair the egg’s antimicrobial defence mechanism in other ways.

Solanum melongena L. (2n = 2x = 24, family Solanaceae, often cross-pollinated) is known as eggplant in the United States and aubergine in France and England. It is one of the few cultivated solanaceous species originating from the Old World. It is known as brinjal in its home country, India, where it was domesticated long ago and where the greatest diversity exists. Widely grown in temperate and tropical Asian countries, eggplant has been also a common crop in the Middle East and around the Mediterranean basin and is now cultivated worldwide. Although an Old World taxon, S. melongena unexpectedly shares strong genetic similarities with New World Solanum species, namely, tomato and potato. These syntenic features have been discovered and will undoubtedly assist in an unlocking of the genes controlling eggplant key horticultural traits (Daunay, 2008).

As per FAOSTAT website-2018 quoted by Ministry of Agriculture and Farmers Welfare, Government of India, Horticulture Statistics Division (2018), the world production of eggplant was 51.29 million tons from 1.79 million ha with a productivity of 28.65 tons/ha during 2016. Top ten countries in eggplant production during this period were China, India, Egypt, Turkey, Spain, Iran, Indonesia, Italy, Japan, and Philippines. The bulk of eggplant production came from top ranking China (0.78 million ha area, 32.03 million tons production and 41.06 tons/ha productivity) followed by India (0.66 million ha area, 12.60 million tons production and 19.09 tons/ha productivity) occupying the second rank. Productivity-wise, Spain is top rank holder with productivity close to 65 tons. Leading brinjal producing states in India are West Bengal, Odisha, Gujarat, Bihar, Andhra Pradesh, Madhya Pradesh, Maharashtra, Chhattisgarh, Karnataka, Haryana, Jharkhand and Assam.

Aetiology
Classification of the causative agent • Ehrlichia ruminantium (formerly Cowdria ruminantium) Order Rickettsiales, Family Anaplasmataceae
• Small, Gram negative, pleomorphic coccus, and obligate intracellular parasite.
• Strains of E. ruminantium are very diverse and vary in virulence: while some strains are highly virulent, others appear to be less-pathogenic.
• E. ruminantium has a high level of genomic plasticity. Several different genotypes can co-exist in a geographical area, and may recombine to form new strains.
• E. ruminantium multiplies in vascular endothelial cells throughout the body to cause severe vascular compromise.
• It usually occurs in clumps of from less than five to several thousand organisms within the cytoplasm of infected capillary endothelial cells, and can be detected in brain smears by light microscopy.
Resistance to Physical and Chemical Action
Temperature
Heat labile and loses its viability within 12–38 hours at room temperature. Infective stabilities can be cryopreserved in DMSO (dimethyl sulphide) or better yet in sucrosepotassium phosphate-glutamate medium (SPG). Infective half-life of thawed stabilate kept on ice is only 20–30 minutes.
pH: Not applicable.
Disinfectants: Not applicable.
Survival:

The following scientists greatly contributed to the wind driven circulation. Out of all Ekman, Sverdrup, Stommel and Munk are most important and ever remembered for their work. So in the following pages discussion is mostly concentrated on these four scientists theories.

El Nino is the name given to the occasional development of warm ocean surface waters along the coast of Ecuador and Peru. When this warming occurs the usual upwelling of cold, nutrient rich deep ocean water is significantly reduced. El Nino normally occurs around Christmas and lasts usually for a few weeks to a few months. Sometimes an extremely warm event can develop that lasts for much longer time periods. In the 1990s, strong El Ninos developed in 1991 and lasted until 1995, and from fall 1997 to spring 1998.

El Nino means ‘The Little One’ or ‘Christ Child’ in Spanish. It was originally recognized by fisherman of the coast of South America as the appearance of usually warm water in the Pacific Ocean, occurring near the beginning of the year i.e. around Christmas. That is why the name is used. El Nino, the periodic warming of Pacific Ocean waters that affects the weather worldwide. C. Fred and T. Andrus of the University of Georgia studied the ancient fish bones from refuse left about 6000 years ago by ancient peoples in Peru and found that ocean catfish lived in water that averaged 60 to 70 warmer than now and that there was little variation in temperature. He concluded that if El Nino was occurring at the modern rate, once every two to seven years, then the bones from the fish would have reflected the temperature variation.

1. Botanical name : Elaeocarpus serratus

2. Family : Elaeocarpaceae

3. Common Name : Ceylon olive and Wild olive

4. Name in Indian languages: Veralu (Sinhala) and Karai or Ulankarai (Tamil).

5. Description

Elaeocarpus serratus, also called, Ceylon olive is a tropical fruit . The tree is a medium size tree with leaves similar to avocado. The tree usually measures from 8 to 15 metres in height. The fruits are almost similar to the large green olives. This is a sun loving tree grows on Loam soil and requires low maintenance. The delicate, lacy, white flowers usually attract a myriad of insect pollinators, notably flies, wasps and flower beetles.

8.1 Introduction

Cartilaginous fishes have ventrally placed mouths with teeth in several series. They possess rigid dorsal fins and placoid scales. They have five pairs of gill clefts opening individually to the exterior, a lower jaw articulated with the upper jaw and upper jaw not fused to the skull, no swim bladder, an operculum, an endolymphatic duct and a heterocercal or homocercal tail. It shows internal fertilization, meroblastic cleavage and direct development.

Elasmobranchii includes a wide range of cartilaginous fishes. Dogfish sharks are commonly studied all over the world probably because of their suitable size for dissection.

Marshall was the frst to establish the idea of elasticity. According to the law of demand, if the price increases, fewer units will be sought for. But it’s crucial to know how much less will be expected of it. Such inquiries are crucial when formulating public policy. For instance: A price rise for salt might not have much of an effect on demand, but a price increase for TV will have more of an effect. Why? The idea of elasticity provides an answer to such queries. In economics, the concept of “elasticity” is frequently used to describe how responsive one variable is to changes in another.:

Elasticity of demand

Demand elasticity generally refers to demand’s sensitivity to price. However, there are as many levels of elasticity as there are demand determinants. The most important Elasticities are:

Determinants of demand Elasticity

8.1. Meaning
The Law of Demand states that when the price of a good increases, its quantity demanded decreases, assuming all other factors remain constant. However, the law does not specify how much the quantity demanded will decrease in response to a price increase or how sensitive demand is to price changes. This information is crucial for businesses and policymakers. To address this, Alfred Marshall developed the concept of elasticity of demand, which measures the responsiveness of quantity demanded to changes in factors such as price, income, and the price of related goods.
8.2. Type of Elasticity of Demand
There are three types of elasticity of demand viz., 01) Price Elasticity of Demand 02) Income Elasticity of Demand 03) Cross elasticity of Demand
1. Price elasticity of Demand
Price elasticity measures the responsiveness of the quantity demanded of a commodity to changes in its price, while keeping all other factors constant (ceteris paribus).

Definition : It is a technique in which foreiirnb is amputed from elbow joint. Indication : Incurable damage of radius ulna.

Electric Cooking Range is also known as an electric stove or electric range; is a stove with a built-in cooktop and with an integrated electrical heating device to cook and bake. Electric stoves became popular as replacements for solidfuel (wood or coal) stoves which required more labor to operate and maintain. “Cookstoves” (also called “cooking stoves” or “wood stoves”) are heated by burning wood or charcoal; “gas stoves” are heated by gas; and “electric stoves” by electricity. Unlike gas stoves, electric stove tops don’t produce a flame.

• Structure and working of electric organs in- Electric eel, electric catfish, electric ray.

• Mechanism of electric discharge formation and control of electric organs.

Fishes possess a number of adaptive structures which have been evolved to meet special requirements faced by them. The electric organs are highly specialized structures that enable their possessors to produce store of discharge to electric current. Fishes are unique in the animal kingdom in being capable of generating an electric current.

About 250 species of both, the cartilaginous and bony fishes of fresh and marine waters are known to possess the electric organs. Most of these restrict to the tropical fresh water of Africa and South America. Many species of rays, skates, and the eels are known to possess small electric organs that give a weak discharge. These fishes can produce electric field outside the body. Electric fishes have been divided into two types-strongly electric and weakly electric, depending on the strength of the current.

11.1. Determination of Electrical Conductivity of Soil Solution

The conductivity or more precisely the specific conductance of a soil at a given soil-water ratio is the reciprocal of the specific resistance offered by the solution at 25ºC between the electrodes of 1 sq cm cross section kept 1 cm apart. Thus, the electrical conductivity of any solution depends on the amount of soluble salt present in it. Knowledge on the extent of salinity is important for management of saline soil including the choice of the crop suitable for that soil. Soluble salt content in saturation extract is more reliable index of salinity level than in soil: water ratio of 1: 2 or 1: 2.5 because it simulates the extent of salinity experienced by crop in field moisture condition.

Salinity class of soil is based on the electrical conductivity (EC) of saturation extract at 25ºC. However, EC of water extract from 1:2 soil-water suspension can be transformed into the EC of saturation extract following the formula (except for soil containing gypsum).

18.1 Determination of Electrical Conductivity of Soil Solution

The conductivity or more precisely the specific conductance of a soil at a given soil-water ratio is the reciprocal of the specific resistance offered by the solution at 25ºC between the electrodes of 1 sq cm cross section kept 1 cm apart. Thus, the electrical conductivity of any solution depends on the amount of soluble salt present in it. Knowledge on the extent of salinity is important for management of saline soil including the choice of the crop suitable for that soil. Soluble salt content in saturation extract is more reliable index of salinity level than in soil: water ratio of 1: 2 or 1: 2.5, because it simulates the extent of salinity experienced by crop in field moisture condition.

Salinity class of soil is based on the electrical conductivity (EC) of saturation extract at 25ºC. However, EC of water extract from 1:2 soil-water suspension can be transformed into the EC of saturation extract following the formula (except for soil containing gypsum).

Pure water is a poor conductor of electricity. Water may carry electricity fairly well when it contains electrolytes such as Acids, bases and salts. Electrolytes in the solution dissociates with cations and anions and pass on electrical conductivity. Hence, more electrolytes concentration in water, more its electrical conductance. The following ions are crucial for adding conductivity to water.
i) Cations: Mg 2+,Ca2+, Na+ and K+
ii) Anions: Cl-, S4
-, CO3
-, HCO3
-and NO3
-
In the International System of units (SI) the reciprocal of ohm is the Siemens (S) and conductivity is reported as millisiemens per meter (mS/m). 1 mS/m = 10 µS/cm = 10 µmhos/cm and 1 µS/cm = 1 µmhos/cm Principle
The quantity and kind of ions present in a solution affect conductivity, which is a numerical representation of a water sample’s capacity to conduct electricity. Since the majority of dissolved inorganic compounds in water are ionised, they add to conductance. The definition of conductance G is the reciprocal of resistance R.

Pure water is a poor conductor of electricity. Water may carry electricity fairly well when it contains electrolytes such as Acids, bases and salts. Electrolytes in the solution dissociates with cations and anions and pass on electrical conductivity. Hence, more electrolytes concentration in water, more its electrical conductance. The following ions are crucial for adding conductivity to water.
i) Cations: Mg 2+,Ca2+, Na+ and K+
ii) Anions: Cl-, S4
-, CO3
-, HCO3
-and NO3
-
In the International System of units (SI) the reciprocal of ohm is the Siemens (S) and conductivity is reported as millisiemens per meter (mS/m). 1 mS/m = 10 µS/cm = 10 µmhos/cm and 1 µS/cm = 1 µmhos/cm Principle
The quantity and kind of ions present in a solution affect conductivity, which is a numerical representation of a water sample’s capacity to conduct electricity. Since the majority of dissolved inorganic compounds in water are ionised, they add to conductance. The definition of conductance G is the reciprocal of resistance R.

Introduction

Proper electrical wiring and earthing are crucial for laboratory safety and functionality. A laboratory houses several installations/equipment that demand stable/continuous power supply. Inappropriate or faulty wiring and earthing may lead to significant risks, including electrical shocks, damage to equipment, and even incidence of fire. Therefore, understanding the requirements of electrical wiring and earthing is essential for designing, construction, and maintenance of laboratory. This chapter aims to provide a basic knowledge of electrical wiring and earthing necessary for a laboratory. Importance of earthing in mitigating electrical hazards and ensuring integrity of electrical installations are also described.

Basics of Electrical Wiring

Basic understanding of electrical wiring is necessary for laboratory safety and efficient electrical functioning. The potential difference between two electrical points (negative and positive) is known as Voltage, which drives the flow of electric current. This is measured as volt (V). The rate of flow of electricity in a circuit is known as Current (I), which is measured as ampere (A). Current can be either direct (DC) or alternating (AC). Opposition/resistance experienced in the flow of current in circuit is known as Resistance (R) and it is measured in ohms (Ω). Higher the resistance means lesser the current flows at a given voltage. The rate at which electrical energy is transferred/utilized in an electric circuit is known as Power (P), which is measured in watt (W). The Power can be calculated as the product of voltage and current (P = V × I).

13.1. Types

Lamps: Head lamp, plough lamp, indicators

Switches: Safety switch, starter switch, etc

13.2. Components

Battery: A battery provides power to electrical or electronic circuits. The voltage rating of a battery tells how much electrical “pressure” the battery can provide. Battery energy is used to operate starter motor and to provide current to the ignition system during cranking. The electrolyte should always be maintained just below the maximum level, but should not go down below the 1/4^th level.

Alternator: Alternators are electromechanical devices used to convert mechanical energy to alternating current electrical energy. While some of the alternators use rotating magnetic field, some use linear. The functioning of alternators is similar to that of direct current generators. As the magnetic field around a conductor changes, a current is induced in the conductor. The rotating magnet or the rotor turns and cuts the field across the conductors. Thus, an electrical current is produced which causes the rotor to turn. This rotating magnetic field causes an AC voltage in the stator windings. In tractors, alternators are used to charge the battery and to power the electric system when its engine is running. An alternator is superior to a dynamo as it provides more precise output control, requires lesser maintenance, is more compact and requires no cut-out.