eChapters

1.1. Types of energy

1.1.1. Potential energy

Stored energy and the energy of position (gravitational).

1.1.2. Kinetic energy

Energy in motion - the motion of waves, electrons, atoms, molecules and substances. It exists in various forms.

Energy is defined as the capacity of doing work and is necessary for survival. It is basic input to any society’s development and economic growth. Everything happens in the world is the expression of flow of energy from one form to other. There are different sources of energy, i.e., chemical, mechanical, fossil, nuclear and renewable energy.

The following products are obtained from refining of crude oil

ALL MATTER IS IN MOTION

Everything moves:

In the atom electrons rotate around the nucleus

In gases, liquids and even solids molecules move away from other molecules

An accumulation of matter (i.e., a baseball) can move as a unit

The average velocity of movement is the distance travelled divided by the time

Bodies in motion have energy; the faster the velocity the more energy

2.1 Energy Consumption Pattern and Energy Resources in India

Energy is vital commodity in economic development of the world and any country. India also experienced a greater shift from non-commercial to commercial energy use after independence over the period. Industrialization and increased population has increased the consumption of commercial energy sources. The mechanization in agriculture and access to clean energy for household application also increased the consumption of the energy. however, the per capita energy consumption remains lower compared to the developed countries. In broader view, the energy used can be categorised in Non-commercial and Commercial energy sources that are used in India.

4.1 Introduction

The energy census survey has become the basis for planning & implementation of the village development based on conventional and non conventional sources which are appropriate to the local needs. The continuous and widespread use of non commercial sources of energy in the rural area is resulting in the large scale destruction of the environment. While the rural people get non conventional fuels at almost zero private cost, the social cost for meeting their energy needs has been increasing over the year. Hence the non conventional fuels acquired a special significance in the energy context.

The rural energy problem is multi dimensional & needs to be tackled through a multi dimensional integrated approach which would include augmentation of energy supply resources, technology transfer for optimum & productive use of resources, R & D inputs in particular for developing low cost energy options for the rural poor, education & training for rural users, linkage with various rural development programmes including village & small scale industries programme and adequate institutional & financial support. The multi dimensional approach for making a village self sufficient in energy planning is illustrated in Fig.4.1.

3.1 Introduction 
The continuous rise in CO2 levels is poised to culminate in a profound global warming impact. Projections suggest that by 2030, CO2 levels could nearly triple, driven by the burgeoning population of motor vehicles. This pressing issue underscores the urgency for the current generation to scrutinize its fuel choices and explore alternative options. Biomass emerges as a pivotal contender, offering a trinity of fuel phases. Escalating petroleum prices and growing apprehensions about the role of fossil fuels in contributing to global warming have spurred a quest for biofuels, recognized for their environmentally friendly attributes. The worldwide energy consumption has increased by an astounding 4 to 5% due to the combination of industrialization and the growing human population. Energy insecurity presents a number of puzzles, including rapidly decreasing fossil fuel reserves due to rapid industrialization, skyrocketing gasoline prices, growing dependence on Middle Eastern oil supplies, and the deleterious effect of fossil fuels on greenhouse gas emissions. (Fig 3.1). Figure 1. Air pollution due to fossil fuel smoke from industries & transportation The UN's June 1992 Earth Summit in Rio de Janeiro set the stage for addressing environmental issues such as acid rain and the greenhouse effect caused by greenhouse gas (GHG) emissions. The goal of the Kyoto Protocol, an agreement between Russia, Japan, and Europe, is to reduce CO2 emissions. The ability of first-generation biofuels to lower CO2 emissions has drawn attention. But there is a lot of criticism about how they use land and how it affects the supply of food. A more complex option is provided by secondgeneration biofuels, which are made of leftover animal fat and lignocellulosic biomass. The third generation focuses on algae, namely single-celled organisms (SCO), as a viable substitute in the fuel industry. Within this discourse, "biofuels" refer to chemicals that are enhanced with energy. When burned, biofuels release fewer toxic emissions than fossil fuels, making them renewable resources. Furthermore, no carbon dioxide (CO2) is emitted into the environment by them; instead, any carbon released during combustion is absorbed by plants as they grow.

10.1. Acts, Policies and Schemes that Benefit Farmers
10.1.1. PM-KUSUM

As part of its Intended Nationally Determined Contributions (INDCs), India agreed to increase the installed capacity of electric power from non-fossil fuel sources to 40% by 2030. The Pradhan Mantri Kisan Urja Suraksha Evam Utthaan Mahabhiyan Scheme aims to ensure energy security for Indian farmers while also upholding this commitment. The PM-KUSUM Scheme was launched in 2019 with 3 components:

Introduction

In order to keep pace with the development there is rise in energy use but it has adverse effects on climate due to greenhouse gas emissions from burning of fast depleting fossil fuels. In this context, we need to harness and use more and more renewable forms of energy, especially solar energy that is plentiful on most part of India. Also, at several locations harnessing wind power and utilizing biomass could be effective alternatives. Solar based devices may also work in an integrated manner with small wind turbines as hybrid devices. At present, about 20% of the country’s installed electricity generation capacity is contributed by renewable sources e.g. wind, solar, bioenergy, hydro etc., which is about 71.325 Giga Watt (GW) as on 30^th June, 2018. In agricultural sector, energy is directly used for pumping irrigation water, operating different mechanized farm implements/tools and processing of foods. Share of agricultural sector in total energy consumption is about 7-8% and further increase in energy use from its present value of 1.6 kW ha^-1 to 2.5 kW ha^-1 is expected to meet the production target of next 20 years.

Fishing is the most energy-intensive food production method in the world today and depends almost completely on internal combustion engines based on oil fuels. Energy is spent during the design, construction and operation of vessels. Energy loss can take place during different stages such as design, construction, operation and maintenance of boats and at harbor.

The energy costs for a particular fishery is determined principally by the technology in use, the local economic conditions, including taxes, subsidies, labour cost and operational cost. (O. Gulbrandson, FAO, 2012)

Only about one-third of the energy generated by the engine reaches the propeller and, in the case of a small trawler, only one-third of this is actually spent on useful work such as pulling the net.

The approximate distribution of energy created from the burning of fuel.

2.1. Solar energy

States like Andhra Pradesh, Bihar, Gujarat, Haryana, Madhya Pradesh, Maharashtra, Odisha, Punjab, Rajasthan, and West Bengal have greater potential for tapping solar energy due to their location.

2.1.1. Advantages

Inexhaustible source of energy.

Environment friendly and inexpensive.

Variety of purposes like heating, drying, cooking and electricity.

Dicotyledons
Ranunculaceae
Juss., Gen. 231. 1789. Type: Ranunculus L.
Ranunculus L., Sp. Pl. 548. 1753. Lectotype: R. auricomus L.
R. sceleratus ssp. sceleratus; Tutin in Fl. Eur. 1: 233. 1964. Ranunculus sceleratus L., Sp. Pl. 551. 1753; Fl. Alld. 1: 2.
Vernacular Name: Jaidhania., Kandira
Description: Annual herbs, erect up to 60-70cm tall. Stem, fistuler simple, glabrescent below, branched and pubescent Leaves 3-5-palmately lobed o partite, lower long-petioled, higher ones panicled. Flowers yellow, Sepals reflexed. Petals oblong. Stamens and carpels numerous. panicled. Achenes with an intramarginal rib. Receptacle pilose.
Distribution: North temperate.
Habitat: A Common-herb during winter near river and pond banks: in wet places in gardens.
 

ABSTRACT

Engaging youth in agriculture has been a prominent topic recently and has risen up the development agenda, as there is growing concern worldwide and also in India that young people have become disenchanted with agriculture. Over 60 per cent of the world’s rural population is made of youth, with half of them being young women and girls. Due to their limited access to assets (in particular land), markets, finance and education and skills training, rural youth are often unemployed or work informally – often in unpaid, very low-skilled, insecure and sometimes hazardous jobs. If young people living in rural areas do not find enough incentives, profitable economic opportunities and attractive environments in which to live and work, they will continue to migrate to cities. This trend would not only contribute to the mega urbanization and growing urban unemployment that is already under way, but is expected to affect global food production: who will then feed the global population that is projected to reach 9.2 billion people by 2050. With most young people around 85% living in developing countries, where agriculture is likely to provide the main source of income it is vital that young people are connected with farming. Currently around the world we’re living in an era where rapid urbanisation has led to a decline in rural populations and for the first time ever the majority of the world’s population lives in a city.

2.1. Introduction

The engine is the source that generates power. It transforms chemical energy in fuel into mechanical energy for power. Diesel internal combustion engines are invariably used in all the tractors. In these engines, very high compression of the air ignites the fuel as compared to spark plug that ignites fuel in petrol engines. The air in the diesel engine is compressed with a compression ratio typically between 15 and 22 resulting in a 40 bar (about 600 psi) pressure as compared to 8 to 14 bar (about 200 psi) in the petrol engine. This high compression heats the air to 550°C (1022°F). At about this moment, small droplets of fuel are sprayed in an atomized form directly into the compressed air in the combustion chamber.

2.2. How does it work?

Any engine will work with four strokes, namely suction, compression, power and exhaust (Fig 2.1). It will also complete two revolutions of the crankshaft. In the suction stroke, pure air is drawn into the cylinder through the inlet valve. The exhaust valve gets closed and the crankshaft completes half a revolution. In the compression stroke, the piston moves up while the valves remain closed. The air which is drawn into the cylinder during the suction stroke is compressed. There is a rise in temperature. The hot air ignites the fuel injected into the cylinder. The crankshaft again completes half a revolution. In the power stroke, the hot products of combustion, viz., carbon dioxide and nitrogen expand. The piston is forced down. The valves remain closed and the crankshaft completes half a revolution. In the exhaust stroke, the exhaust valve opens while the piston reaches the lowest point of travel. Then the burnt gases are swept out.

INTRODUCTION
Tractors revolutionized agriculture by replacing animal-powered farming with machine-driven efficiency, significantly boosting productivity for millions of farmers globally. However, regular tractor engine maintenance is crucial to ensure smooth and efficient operation.
An engine overhaul is a thorough process designed to restore the optimal performance of an internal combustion engine. Over time, engines experience wear and tear due to constant use, exposure to different conditions, and aging, which can result in reduced performance, efficiency, and reliability. To mitigate these issues and prolong the engine’s operational life, an overhaul becomes essential.
A tractor engine overhaul involves dismantling the engine to diagnose and replace defective components, followed by reassembly. This process aims to enhance the engine’s performance, power, and overall efficiency, ensuring it meets the demands of agricultural work effectively.
WHAT IS AN ENGINE OVERHAUL?
An overhaul is an extensive procedure that includes disassembling, inspecting, cleaning, and repairing various engine components. This process aims to restore the engine to its original condition or enhance its performance. It is applicable to a wide range of engines, including those found in cars, airplanes, boats, and other machinery, with specific procedures varying based on the engine type and the extent of repair required.
An engine overhaul involves inspecting, cleaning, and either repairing or replacing internal components as necessary. Typically undertaken when an engine shows significant performance decline due to wear and tear, an overhaul can restore functionality and efficiency, offering a more cost-effective alternative to complete engine replacement.

1. Introduction

1.1 Engineered health rice

Rice is one of the leading food crops in the world and sustains two-third of the world’s population providing 20% of the world’s dietary energy supply. It can be polished and marketed as white rice or can be marketed with the bran layer left intact as brown rice. The dry grain can then be steamed or boiled by the consumer to rehydrate and cook it (Kato, 2006). Despite its primary importance as a staple food, rice has several disadvantages. Primarily, rice is low in protein and high in starch. The low protein levels in rice can lead to protein malnutrition in societies where rice is the primary constituent of the diet. Deficiencies in essential amino acids may also result from a diet primarily comprised of rice. For example, lysine is the essential amino acid found in the lowest quantity in rice. The human body needs lysine for proper growth and repair of tissues. It is also important in the production of various enzymes, hormones and disease-fighting antibodies (Kato, 2006). The production of broken rice is nearly 15-20% of total production of rice (Bhullar and Bhullar, 2013). The broken rice is generally used for rice flour production and Indian traditional foods such as Idli, Dosa and weaning foods etc. Ugwu et al., (2012) reported that the rice broken can be utilized for the production of poly (3-hydroxybutyrate). The major value addition of broken rice is possible by reconstructing it into rice-shape and fortifying it with desired nutrients or micronutrients, which is a big challenge in terms of making the product acceptable to the consumers.

One approach to overcome the above mentioned challenges is to prepare artificial rice kernels or rice analogues by extrusion, in which the vitamins are embedded and consequently do not separate from the rice grains. This will utilize mainly the broken rice which is either discarded or sold at subsidized prices as the cattle feed. Furthermore, embedding makes extraction of the vitamin by rinsing or cooking more difficult and may provide a certain protection against oxidation, because the vitamins can be enveloped by a protective matrix (Steiger, 2010). The fortification of commercially produced staple foods allows exposed populations to benefit without making major changes to their eating habits (Kunz, 2009).The rice analogues prepared from extrusion can be used by addition of an appropriate proportion of water at a temperature ranging from 90°C-100°C, whereupon the rice product rehydrates within three minutes to obtain a product having the desired appearance and organoleptic properties to simulate natural rice grains (Harrow and Martin, 1982).

Abstract

With recent advances in molecular biology and rapid developments in new analytical techniques, engineering of microbes for the bioremediation processes has been extensively studied as recombinant microbes can degrade various toxic pollutants effectively. The prospect of microbial engineering has greater potentialities for agriculture and environmental applications and this may provide us deeper insight in understanding the microbial interactions and biotransformation processes. Though much work has been carried out on bioremediation using genetically engineered microorganisms, its application is restricted to environment due to the concerns of health and environment over ecosystem. Nevertheless, evaluation of risk assessment has also been carried out in order to ascertain the potential benefits of transgenic microbes.

Introduction

Growing waste production globally is a serious threat to a sustainable ecosystem. A World Bank analysis estimates that in 2016 alone, cities globally produced over 2.01 billion tonnes of solid waste or 0.74 kg per person each day. The amount of waste generated annually is predicted to rise by 78% from 2019 levels to 3.40 billion tonnes in 2050 due to fast urbanisation and growing populations (Chandra Paul et al., 2019). The wastes include radioactive substances, agricultural wastes, food wastes, industrial wastes, municipal wastes, garbage, paper waste etc. The extensive use of land for commercial, industrial, and residential reasons has resulted in a decline in the amount of open ground available for waste disposal. Proper waste collection, transportation, recycling, and disposal must be done to decrease the amount of waste on earth. To manage waste in developing nations and urban areas sustainably, integrated waste management systems that are effective, economical, efficient, and socially inclusive are crucial.

Progress of any nation is driven by human curiosity and ingenuity. Engineering is one profession that has shown humanity the ways to meet its needs. It made the forces of nature work for the good of mankind. The biggest challenge for engineering profession has been its integration with the human needs. Engineering transforms technical conscience into applied realities. On the one hand, engineers are not limited by technology, and on the other, they are worried about the risks to the environment, health, sustenance and safety.

Engineer is a composite; “He is not a scientist, he is not a mathematician, he is not a sociologist or a writer; but he may use the knowledge and techniques of any or all of these disciplines in solving engineering problems.” Engineering in the broadest sense, relates to the “development, acquisition and application of technical, scientific and mathematical knowledge about the understanding, design, development, invention, innovation and use of materials, machines, structures, systems and processes for specific purposes.” Engineer works under various constraints: nature, cost, safety, environment, ergonomics, reliability, manufacturability and maintainability, among others.

This is how Neil Armstrong described himself, “I am, and ever will be, a white- socks, pocket-protector, nerdy engineer — born under the second law of thermodynamics, steeped in the steam tables, in love with free-body diagrams, transformed by Laplace, and propelled by compressible flow.”

Remote sensing can be a useful tool in engineering geological investigations, particularly in the identification and characterization of geological features and hazards.

Some of the ways that remote sensing can be used in engineering geological investigations include:

Geological mapping: Remote sensing data can be used to create detailed maps of the geological features in an area, including rock formations, faults, and folds. This information can be used to identify potential hazards, such as landslides and rockfalls, and to plan engineering projects accordingly.

Landslide detection and monitoring: Remote sensing data, such as satellite imagery, can be used to detect landslides and monitor their movement over time. This information can help engineers to design and implement appropriate stabilization measures.

Ground deformation monitoring: Remote sensing techniques, such as Interferometric Synthetic Aperture Radar (InSAR), can be used to detect ground deformation caused by geological processes such as subsidence, uplift, and faulting. This information can be used to identify potential hazards and plan engineering projects accordingly.