eChapters

Introduction

Fruits, vegetables and some non food crops are rich source of natural antioxidants, food colorants and other bioactive natural products. Nutraceuticals and natural food colorants exhibit anti-oxidant, anti-carcinogenic, anti-inflammatory, anti-bacterial and anti-proliferative properties. They tend to enhance ability of the body to fight, cure and prevent diseases. Natural anti-oxidants are particularly important because they scavenge harmful superoxide, hydroxy, and/or peroxide free radicals, and protect the body against a variety of cancers, heart and other life style related diseases. Vegetable like orange carrot, red carrot, black carrot, beet root, tomato, chilli, and fruits like pomegranate, cherries, berries, watermelon and jamun are rich source of natural antioxidants and food colorants. While tomato and red carrot are rich in lycopenes, and carotenes; black carrot is a major source of stable acylated anthocyanins. The dark red colour of beet root is associated with anthocyanin, betacyanin and betaxanthins. Similarly, the red colour of chilli is attributed to the carotenoid pigment capsanthin. Capsaicinoids in chilli are responsible for the hot flavour and anti-inflammatory properties. Antioxidant and other beneficial health effects of pomegranate, cherries, berries, etc. have been attributed to anthocyanins and related polyphenols. Jamun, an under-utilized tropical fruits is rich in anthocyanins and flavonoides. Like anthocyanins, flavonoides and carotenes, lycopene helps to prevent various types of cancer particularly the prostate cancer.

Microalgae represent a promising alternative to renewable source of feedstock for natural food colorants and nutraceuticals and functional food production. With over 40,000 identified species, microalgae are one of the most diverse groups of organisms on earth. They naturally produce large quantities of many biomaterials. Out of the diverse compounds produced by microalgae, the algal pigments such as phycobillins, carotenoids and xanthophylls have gained commercial importance owing to their unique and multiple applications as food and cosmetic colourants, antioxidants and several beneficial effects of nutraceutical and pharmaceutical value. Microalgal research over the years has geared up significantly from outdoor mass culture in algal ponds, refinement of the cultivation process and life cycle assessment, downstream processing of biomass (i.e., harvesting, dewatering, and drying), to extraction, to systems/process scale-up analysis and development of an economic feasibility model for commercialization of algal biomaterials with nutraceutical properties. Among the various microalgae, Spirulina and Haematococcus are the major source of naturally occurring biopigments which are gaining importance as natural pigments in food, drug and cosmetic industries as an alternative to currently used synthetic colour. Improvement in the cultivation methodologies and use of closed photobioreactors of different configurations, fermentation reactors, open reactors and tubular reactors have opened up new vistas for the development of microalgal biotechnology and bioprospecting. The main constraints in non-exploitation for mass cultivation of microalgae are their slow growth rate, low biomass yield and inadequate culture methodologies and these issues remain to be addressed.

1. Algal Biomass

Algae is defined as heterogeneous assemblage of organisms that range in size from tiny cells to giant seaweeds, thus algae mostly are photosynthetic species which include eukaryotes and prokaryotic Cyanobacteria (blue-green algae) and live in aquatic habitats. They are ubiquitous in nature and are found in variety of environments ranging from soil, sand, marshes, brackish water, sea and fresh water. Most of them are capable of manufacturing their own food.

Microalgal research is offering wide potential in food biotechnology and is gaining more attention because of presence of wide range of bioactive and nutraceutical properties and added health benefits.The increasing population is one of the major growing concerns of today’s world. To meet the nutritional requirement of the rising population, researchers are looking for optional sources for food which are easy to cultivate, cost effective and produce large amount of bioactive compounds useful to prevent major diseases. Chlorella is unicellular green alga that is a potential source of nutrients like carotenoids, minerals, vitamins, and polyunsaturated fatty acids. Especially, omega-3 fatty acid and carotenoids have received considerable interests due to their roles in the prevention of chronic diseases. Lutein and zeaxanthin from Chlorella have been shown to be associated with eye health and function. Beta-carotene is known to reduce the risk of CVDs and certain cancers. Animal studies also demonstrated that Chlorella supplementation reduced the serum cholesterol levels.

Similarly, the blue green microalgae Spirulina, possesses diverse biological activities and nutritional significance. Regular consumption of Spirulina fortified food improves immune system by increasing phagocytic activity of macrophages, stimulating the production of antibodies and cytokines, increase accumulation of NK cells into tissue and activation and mobilization of T and B cells. Spirulina have also shown to perform regulatory role on lipid and carbohydrate metabolism by exhibiting glucose and lipid profile correcting activity in experimental animals and in diabetic patients. They were also found to be active against several enveloped viruses including herpes virus, cytomegalovirus, influenza virus and HIV. They are capable to inhibit carcinogenesis due to antioxidant properties.

The intricate balance between the Earth’s atmosphere and its ecosystems has always been a subject of fascination and concern, particularly when it comes to the impact of extreme weather events on agriculture. The delicate balance that sustains life on our planet is often disrupted by the very forces that make our environment dynamic and diverse. Extreme weather events, such as hurricanes, droughts, floods, and heatwaves, have become a recurring theme in the narrative of global agriculture, leaving in their wake trails of devastation, economic loss, and food insecurity. Agriculture, the backbone of many economies around the world, is inherently sensitive to weather patterns. The cycle of planting, growth, and harvesting is deeply intertwined with the climate and weather conditions of a region. Any significant deviation from the expected weather patterns can have far-reaching consequences for crop yields, livestock health, and ultimately, the livelihoods of those dependent on farming and related activities. The relationship between weather and agriculture is not just about the immediate impacts of extreme events but also about the long-term changes in climate that alter the very fabric of agricultural practices and productivity. Weather hazards and disasters, by their nature, are becoming more frequent and intense due to climate change, posing unprecedented challenges to agricultural systems worldwide. These events not only affect the quantity and quality of agricultural produce but also have profound implications for the environment, economy, and society at large. For instance, a severe drought can lead to crop failure, affecting food availability and prices, while also depleting water resources, which in turn can exacerbate land degradation and loss of biodiversity. The global interconnectedness of food systems means that the impacts of extreme weather events on agriculture in one part of the world can have ripple effects on food security and economies elsewhere. This interconnectedness underscores the need for a comprehensive understanding of the complex relationships between weather patterns, agricultural productivity, and the resilience of food systems. By examining the causes, consequences, and responses to extreme weather events and their impacts on agriculture, we can begin to unravel the intricacies of these interactions and explore strategies for mitigating the adverse effects and enhancing the resilience of agricultural systems in the face of an increasingly unpredictable climate.

Abstract

The ability of life to dwell in extreme environments on our mother planet earth right from a thirsty desert environment to highly water saturated oceans, gave the scientists a new area to work in during the 1990’s. The discovery of microbial life which had the ability to survive in conditions which were highly inhospitable for the normal life gave rise to a revolution in the field of science and technology. Extremophiles are one of the most primitive forms of life on earth since they have accustomed themselves to the present day harsh conditions compared to the normal environment. The last few years have seen a massive increase in their discovery, since the areas which once were thought barren by the scientists are now found inhabited by the microbial life. The extremophiles endure conditions right from extreme temperatures, pressure, salt concentration to radiations, metal tolerance, pH etc. During the past few years the industrial applications associated with the extremophiles and their products have led to their intensive exploration. Keeping in view the present and the future scenario, extensive efforts are still required in order to exploit the extreme environments for extremophiles and their products.

Food extrusion technology is a popular means of preparing snacks and ready-to-prepare food items. It is a method of size enlargement in which tiny granular food or powdered particles are strengthened into bigger parts with various forms, texture, color, etc. Extrusion cooking or thermoplastic extrusion is a common extrusion technology considered to be a process of HTST (high temperature, short time). It allows the manufacturing of a wide range of food products with little or no alteration of the fundamental equipment and adequate process control. Extrusion cooking is used for starchy and protein substances to make nutritious foods. Generally, such products are rich in calories and incorporation of protein rich fish improves its nutritional value. Most of the cereal-based extruded snacks were primarily made from maize, wheat and rice. However, these cereals (e.g. rice) have comparatively low protein content (6 - 8 g/100 g db) and an elevated amino acid profile in glutamic and aspartic acid, whereas lysine is the restricting amino acid. Therefore, it is recommended that protein food ingredient (e.g. fish) be added to the extruded snack products to develop nutrient rich diets.

Fish is considered to be great sources of protein of high dietary importance with a balanced profile of essential amino acids and lipids containing omega-3 fatty acids, in particular essential fatty acids such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), respectively. EPA and DHA are very essential to normal growth and development. To avoid or moderate coronary artery disease, hypertension, diabetes, arthritis, other inflammatory and autoimmune illnesses, these vital fatty acids are discovered. The benefits of fish-based extruded products will assist in providing a big population in the nation like India with nutritious and balanced diets.

Extrusion cooking is an emerging technology having advantages of low production cost, capable of producing end products in various shapes and sizes, from a variety of food materials with easy digestibility, maintaining hygiene and high product quality and leaving no effluents or hazardous materials. Minimal energy consumption and processing costs and possibility of flavour addition are the added advantages of technology. The process/technique has the versality and ability to constituently produce a given product in continuity at a given set of pre – determined specifications. It destroys fat splitting enzymes to avoid rancidity and thus extends the shelf life of products considerably. Microorganisms present in food materials are destroyed. It can be effectively utilized to develop functional and designer foods by using several locally available under-utilized food materials. However, it leads to increased package cost as puffed or expanded food products have low bulk density. R & D studies are further needed for co – extrusion of variety of cereals with high fibre content foods and micronutrients.

1.1 Introduction and Background

In present scenario, the word “extrusion” refers to a process by which dry or semi-moist ingredients with varying in-barrel moisture are forced through varying barrel temperature, screw speed and screw configuration through a die opening of the desired cross section. In other words, extrusion is predominantly a thermo-mechanical processing operation that combines several unit operations, including mixing, coating, kneading, venting, shearing, heating, forming, partial drying or puffing, depending on the material and equipment used.

The origins of extrusion are in the metallurgical industry, where in 1797 Joseph Bramah patented the first extrusion process, wherein a piston driven device was used for making seamless lead pipes. The present understanding of extrusion technology and the developments or improvements in machine design are largely due to research carried out by the plastics industry. In food industry, this technology is in use since 1930 and its popularity is increasing continuously due to its efficiency, continuity and sustainability. In beginning, sausage extruders were developed in the nineteenth century as simple forming machines. One of the original developments which laid the foundation of the food extrusion was the use of pasta press termed as “cold extruder” in mid 1930s. Furthermore, in the late 1930s, General Mills, Incorporation., Minneapolis, MN, USA, first used a single screw extruder in the manufacture of ready-to-eat (RTE) cereals. Later in 1970s, twin screw extruders were used for the manufacture of moist pet-foods. Twin screw extruders were also adapted from polymer industry, as rising food quality and limitations of single screw extruders were demanding a more versatile process for the newer and higher quality products. After 1970s, the extrusion processing with simultaneous use of heat was popularized as a versatile and highly energy efficient with negligible wastage process. In all these years, number of changes has been noted in the extruder design such as changes in screw design, barrel design and also material used for the manufacture of these materials. Barrel liners availability along with already available segmented screws could further add more economics to the process and increased equipment lifetime. For better wearing characteristics, a number of screw elements of different materials are being used in addition to standard nitrided steel for customized processing needs, such as corrosion and wear resistant surface coated steels, stainless steel, satellite welded and bimetallic HIP (Hot Isostatic Press). JBL Feedscrews Limited, a UK based company recently introduced tungsten carbide coated screw in conjunction with a compatible bimetallic barrel. Likewise, a number of options for barrel metallurgy are available to withstand the higher internal pressure and temperature. Barrels lined with hard cobalt based alloy, typically Xaloy, to give abrasion and chemical resistance are also in use, although, the most common material is carbon steel with a nitride interior. Similarly, steam heated or jacketed barrels were used earlier for cooking purpose which gradually replaced by the electric induction heating elements. These HTST cooking extruders are versatile, highly productive and energy efficient processing machines. They can use a wide variety of raw materials and formulations to produce products with increased shelf-life and convenience.

The diagnosis of blindness is as follows: an animal that is blind is apprehensive, easily agitated, has an uptight head position with a feeling gait, stumbles forward, steps up high, collides with obstacles in its path, and lacks the cross reflex, photomotor pupillary reflex, and palpebral reflex. Clinical examination of the eye:

• By necked eye

• By magnifying lenses

• By catoptric test: use to detect opacities of the cornea and lens

• By ophthalmoscope

• By tonometry: use to measure intraocular pressure.

Abstract

It has been established beyond doubt that the drainage architecture and the fluvial histories of river systems give excellent indications not only on the surficial lithology but also on the ongoing morphotectonic processes of the planet earth. Among the various drainage patterns, the ‘eyed drainage’ pattern is considered to be one of the most significant anomalies and such ‘mega eyed’ drainages interpreted from IRS-IA imagery in some of the major river systems in Tamil Nadu, Indian Peninsula, are found to signify ongoing tectonic movements in an otherwise seismically inert shield area.

12.1 Introduction

The name was coined by George W. Snedecor, in honour of Sir Ronald A. Fisher. The object of the F-test is to find out whether the two independent estimates of population variance differ significantly or whether the two samples may be regarded as drawn from the normal populations having the same variance.

The F-test for the equality of two variances

Rationale

The two-sample t-test and the analysis of variance make the assumption of homoscedasticity, i.e. of equal variances in groups of data. The F-test, often called the variance ratio test, may be used to investigate the homoscedasticity of two data sets.

We have to make a decision whether or not the population variances are likely to be different. This means that we need a cut-off for the variance ratio; if the variance ratio exceeds this cut-off value, we will conclude that the variances are unequal.

We determine this cut-off value formally, under the null hypothesis that the two population variances are equal, by referring the ratio to the table of the F-distribution. The degrees of freedom are (n1 – 1) in the numerator (the larger variance) and (n2 – 1) in the denominator (the smaller variance), where n1 and n2 represent the two sample sizes.

For the required significance level in a two-tailed test, therefore, we must halve this tail area. So, for a two-tailed test at the 5% level of significance, we have to relate the test statistic to P = 0.025. For convenience, we give the upper percentage points corresponding to P = 0.025 and P = 0.005 (relating to two tailed P-values of 0.05 and 0.01, respectively) in separate tables.

Factor analysis: Factor analysis is the most commonly employed multivariate procedure in the research studies when there is a systematic interdependence among a set of observed or manifest variables and the research worker is interested in finding out something more fundamental or latent which creates this commonality.

Fagopyrum acutatum (Lehm.) Mansf. ex Hammer (syn. Fagopyrum cymosum (Trev.) Meissn (Polygonaceae): Eng.- Medicinal Buckwheat / Perennial Buckwheat; Hindi – Kutu; Kash.- Tsok Hakh [RC]. A tall branched, puberulous annual growing wild in Drasss, Kargil, Gurez areas at 2800 to 3300 m amsl. Leaves tri-angular; perianth white. Grains acutely 3- cornered.

F0 value: It is used to express F-value when z =10oC / 18oF and the temperature is 121.1oC. It is the number of minutes at a specific temperature (250oC) required to destroy or kill a stated number of microorganisms and has specific z-value. It is also called reference value.

Facing or lining board: The layer of the paper on which the flute is embedded is called facing or lining board (Plate 258).

Facultative anaerobic: Organisms that grow either with or without oxygen.

Facultative parasites: Facultative parasites can adapt to live on dead organic matter and often have a wide host range and can easily be cultured on artificial media. These organisms may be aerobic or anaerobic but under changed conditions, they changes to anaerobic or aerobic.

Falling rate period: It is that part of the drying process during which the drying rate varies with time and the instantaneous drying rate per unit surface or weight of dry material continuously decreases. Falling rate takes place when most of the moisture has been evaporated during constant rate period. The falling rate period during dehydration take place in the final stage of dehydration when the food commodities have large amount of free water available for evaporation. Here, rate of removal of the moisture from the food to the surrounding is continuously decreasing / falling per unit time.

Facilitated diffusion: Facilitated diffusion is a movement in the direction of a concentration gradient; but it involves moving through a channel protein or a carrier protein. A channel protein is merely a pore in the membrane, and is often gated to control movement. A carrier protein has a binding site where the substance attaches and moved through the membrane.

Facultative CAM: Plants which behave as C₃ under conditions of normal water supply. However, switch over to CAM mode under conditions of water deficit.

FAD (Flavin adenine dinucleotide): A riboflavin containing co-enzyme of some oxidation reduction reactions.

Facultative long day plant: Facultative photoperiodic plants are more likely to flower under appropriate light conditions, but will eventually flower regardless of length of night.

FADH: In biochemistry, flavin adenine dinucleotide (FAD) is a redox cofactor, more specifically a prosthetic group, involved in several important reactions in metabolism. FAD can exist in three different redox states, which are quinone, semiquinone and hydroquinone. FAD is converted between these states by accepting or donating electrons. FAD, in its full oxidised form or quinone form, accepts two electrons and two protons to become FADH₂ (hydroquinone form). The semiquinone (FADH) can be formed by either reduction of FAD or oxidation of FADH₂ by accepting or donating one electron and one proton, respectively.

INTRODUCTION

Hybrid crops are derived from an established and well-proven breeding method used in ornamental sectors. The development of hybrid crops has been one of the major factors behind a dramatic increase in global crop yields. Hybrid is produced by crossing between two genetically dissimilar parents. Pollen from male parent called pollen parent will pollinate, fertilize and set seeds in female called seed parent to produce F1 hybrid seeds. For production of a hybrid, crossing between two parents is important, the crossing process will results in heterosis or hybrid vigour. Heterosis is defined as the increase in size or vigour of a hybrid over its parent. This boost in performance, combining the best yield, quality and agronomic characters from each parent, is the result of hybrid breeding.

INTRODUCTION

Hybrid crops are derived from an established and well-proven breeding method used in ornamental sectors. The development of hybrid crops has been one of the major factors behind a dramatic increase in global crop yields. Hybrid is produced by crossing between two genetically dissimilar parents. Pollen from male parent called pollen parent will pollinate, fertilize and set seeds in female called seed parent to produce F₁ hybrid seeds. For production of a hybrid, crossing between two parents is important, the crossing process will results in heterosis or hybrid vigour. Heterosis is defined as the increase in size or vigour of a hybrid over its parent. This boost in performance, combining the best yield, quality and agronomic characters from each parent, is the result of hybrid breeding.

F₁ hybrid seed offers to the growers a significant benefits in terms of yield improvement, agronomic performance and consistency of end-use quality. But attempting to farm-save hybrid varieties will result in segregating populations producing highly variable offspring, which can lead to reduced yield, disease resistance and quality. As this factsheet explains, it doesn’t make economic or agronomic sense to save seed of an F₁ hybrid. In self pollinated crops it is difficult to cross but in cross pollinated crops it is easier. In nature to create genetic variability and for its wider adaptation in different environmental conditions, flowering plants has adopted many mechanisms for cross pollination. Cross pollination results in genetic heterogeneity and show wider adaptations. F₁ hybrids are in immense usage throughout the world with the rapid increasing interest in flowers, however the total number of the hybrids developed in flowers is still less. In India hybrid seed production is taken up in Bengaluru, Pune, Delhi, Punjab, Haryana, Jammu and Kashmir and Himachal Pradesh for export.

F₁ hybrids in ornamental crops were known even before Shull 1911 when he propounded the classical theory of hybrid vigour in plant breeding for the first time. In 1909 F₁ hybrid variety Prima Donna in begonia was released by Benary Seed Company in Germany. The first commercial F₁ hybrid in petunia was produced by Japan during World War II, in 1942. From 1950 onwards, F₁ hybrids were available in ornamental flowers from The Netherlands, Denmark, Germany, USA and UK besides Japan and produced in flower crops like ageratum, anemone, gerbera, primula, petunia, cyclamen, marigold, pansies, begonia, geranium, portulaca, dianthus, balsam, stock, wall flower, ornamental sunflower, gazania, hollyhock, calceolaria and zinnia. Flower breeders became familiar with the F₁ hybrid production of those crops also which were formerly propagated by vegetative parts such as pelargonium and gerbera. A few important hybrids were first released in petunia in 1940-50, geranium single in 1960, antirrhinum, marigold, pansy and zinnia in 1965, ageratum in 1966, geranium double in 1970, dianthus, impatiens, portulaca in 1976-77, gerbera in 1980 and carnation in 1981.

Fabric defects are imperfections or irregularities that diminish the appearance, structural integrity, functionality or performance of textile materials and finished products. They may develop during fibre preparation, yarn production, weaving, knitting, dyeing, printing, finishing, handling or storage. Their early detection and prevention are necessary for maintaining quality, minimizing material waste and protecting customer satisfaction. Quality-control personnel use inspection systems and analytical tools to record the frequency and seriousness of defects. Check sheets, histograms, control charts and Pareto analysis help classify faults and identify the most important problems. Understanding defect types and their underlying causes allows manufacturers to implement suitable remedies and prevent their recurrence.

Aim

Purpose: As there is no institution for preparation ofthomassplintfor large animal till date for which physician are preparing thomas splint hear the patient at the time of need.

These thomas splint are generally prepared with useof bamboo, Gl wire, jute of cottonbandages. These thomas splint are generally weak. These thomas splint work for (2-3) month.

For this reason there is necessity of fabrication of large animal thomas splint with us e of other strong and lightest material for long time stonage and use.

It consists of 2 parts-A) fabrication of fixed supporting frame B) fabrication of animal swing frame.

Fabrication of fixed supporting frame -

Materials required - Bamboo pole and rope

Fabrication Technique - Size a frame 3m for large animals, 2.5m for medium sized and 2 ml for small sized animals.

Fabrication of animal swing frame-

Materials required - Strong fixed rectangular iron frame

Fabrication technique - The required no. of bicycle tyres are fastened upon the frame. All individual tyres are tied with jute threads at 3-4 places.