eChapters

Introduction

India is the second most populous country in the world. The per capita cultivable land resource is shrinking day by day. To meet the food, fibre, fuel, fodder, and other needs of the growing population, the productivity of agricultural land has necessarily to be increased. It requires increased use of agricultural inputs like quality seeds, fertilizers, water, agro-chemicals, etc. in such a manner that do not create any environmental problems.

Plant needs different chemical elements to grow and thrive. The most important chemical elements include (i) carbon, hydrogen and oxygen, which are basic life building blocks and are available in plenty from air and water (ii) nitrogen, phosphorus and potassium which are the macro nutrients and affect the plant growth significantly (iii) sulfur, calcium, and magnesium as secondary nutrients and (iv) boron, chloride, copper, iron, manganese, molybdenum and zinc as micronutrients in very small quantities.

SUMMARY

Fertigation is the injection of concentrated soluble nutrients into irrigation water to enhance crop production. It is used extensively in commercial agriculture and horticulture. In combination with micro-irrigation (drip irrigation), this technique forms an efficient method for precisely applying nutrients close to the crop root zone, especially when a polyethylene mulch is used. Fertigation is used to spoon feed additional nutrients or correct nutrient deficiencies detected in plant tissue analysis and usually practiced with high value crops such as vegetables, turf, fruit trees, and ornamentals. Water supply for fertigation kept separate from domestic water supply to avoid contamination. Fertilizing fruit and vegetable crops requires a delicate balance between yield, quality, and environmental impact. Fertigation increases response to nitrogen (N) and provides greater opportunity to control rates to optimum levels to the root zone. Providing nutrients through the irrigation system enables more flexibility in a fertilizer program. Several types of irrigation systems are available for use in crop production. For any system used, approved backflow control valves and interlock devices are necessary to prevent accidental contamination of the water source due to irrigation system failure or shutdown.

The Fertilizer (Control) Order

The Fertilizer (Control) Order (FCO) is a set of legally enforceable executive orders issued by the Govt. of India under the Essential Commodities Act, 1955 passed by the Parliament. This order came into force in 1957, essentially to regulate the sale, price and quality of fertilizers in India. Amendments are made from time to time as per the exigencies and need of the hour and therefore a large number of amendments were made over a period of time. Consequently, after an overall review of the various provisions of the order, a revised Fertilizer (Control) Order 1985, was issued, which came into effect on September 25, 1985. The FCO consists of five Schedules comprising of different activities as mentioned in Figure 8.1, besides forms of registrations and appendices.

Schedule I comprises Part A and B. While Part A contains the specifications of different fertilizers (e.g. minimum nutrient content, maximum moisture content, range of physical parameters, maximum levels of impurities/ contaminants, etc.), that can be marketed in India (no material not performs the specifications as in the FCO cannot be sold as fertilizer), Part B lists the tolerance limits in plant nutrients and physical parameters for various fertilizers. Schedule II encompasses again two parts, with Part A describing the procedures for drawal of samples of fertilizers, and Part B describing detailed methods of analysis of fertilizers.

Schedule III encompasses four parts namely, Part-A, Part-B, Part-C and Part-D. While Part-A contains specifications of different biofertilizers, Part-B contains tolerance limits of biofertilizers, Part-C describes the procedures for drawal of sample of biofertilizers, Part-D describes the methods of analysis of biofertilizers. Schedule IV also encompasses four parts. Part-A contains specifications of organic fertilizers, Part-B contains tolerance limits of organic fertilizers, Part-C describes the procedures for drawal of sample of organic fertilizers, and Part-D describes the methods of analysis of organic fertilizers. Schedule V also contains of four parts. Part-A contains specifications of non-edible de-oiled cake fertilizers, Part-B contains tolerance limits of non-edible de-oiled cake fertilizers, Part-C describes the procedures for drawal of sample of non-edible de-oiled cake fertilizers, and Part-D describes the methods of analysis of non-edible de-oiled cake fertilizers.

14.1 INTRODUCTION

India is conferred with a varied agro-climatic condition which are highly favourable for growing a large number of horticultural crops such as fruits, vegetables, root tubers, ornamental, aromatic plants, medicinal herbs, spices and plantation crops like coconut, areca nut, cashew and cocoa (Ministry of Information and Broadcasting, GOI, 2008). India is next only to China in area and production of vegetables and occupies prime position in the production of caulif lower, second in onion and third in cabbage in the world. After achieving food security, it is being increasingly felt that India needs to achieve nutritional security for betterment of its population. In achieving nutritional security fruits and vegetables play an important role (Ganeshmurthy et al.2011). Although we have achieved good production levels of fruits and vegetables, the present production of fruits and vegetables may not be enough to meet out the demand. To feed the ever-increasing population in a sustainable way a tremendous effort will have to be made to increase the production of fruits and vegetables both horizontally and vertically through a rational and balanced use of production inputs, specially the mineral fertilizers. Soil fertility is a key factor for successful crop production, and it is a measure of capacity of soil to supply plant nutrients. The importance of soil fertility and fertilizer management is being increasingly recognized in all countries recently to meet the demand for food and other agricultural raw materials. Intensive use of fertilizer, intensive cropping with high yielding cultivars have increased the food production and reduced the food shortage, but it has also brought in numerous problems of soil fertility, soil and water pollution. On the other hand, fast depletion of nutrients due to over exploitation, a wide-spread deficiency of N, P, K and S coupled with micro-nutrients deficiencies especially Zn and boron has been noticed in many soils. Further deforestation, shifting cultivation, burning of trees, bushes, grasses and cow dung, soil erosion, soil degradation, nutrient losses, excessive fertilizer application, leaching losses etc., have aggravated the depletion of soil fertility status. It is being realized that the future of Indian agriculture is closely related to scientific management of soil fertility along with judicious and efficient use of fertilizers. Soil fertility and nutrient management is one of the important factors that have a direct impact on crop yield and quality. Soil test reports help in determining soil organic matter, pH, electrical conductivity, cation exchange capacity, and levels of important macronutrients (phosphorus, potassium, calcium, magnesium) and micronutrients (boron, zinc, etc.). These reports also help estimating lime or sulphur application rates to increase or reduce soil pH, respectively. Maintaining a soil pH between 6.0 and 7.0 is recommended for most crop rotations that include vegetable crops.

Introduction

Fertilization is the application of fertilizer for the benefit of the crops. It may be traditional broadcasting or fertigation. In broadcasting method the fertilizer is applied in concentrated granular form. The size of the granules ranges from granular dust to pellet size. These solid fertilizers get dissolved by the rain or irrigated water to leach down the plat root zone. This method results uneven nutrient delivery due to uneven dissolving the fertilizer granules. It may cause burning of plant leaves and root system due to uneven and uncontrolled release of nutrients. Dry fertilizers can volatilize and release gases which may damage or burn the nearby foliage. Availability of fertilizer to the plant root zone largely depends on the temperature and availability of water to dissolve the fertilizers.

In fertigation liquid or water-soluble fertilizer, soil amendments or other products required by the plants is either sprayed on to the plant material or applied to the plant bottom with irrigation water. Foliar application provides high rate of absorption of fertilizer through the leaf/stalk/branch structures of plants. Ground application also provides good consistency in making its way to root zone and plant absorption. Thus, the fertigation provides benefit of increased nutrient absorption; decrease water needs, and reduce the fertilizer and chemical use (Anonyms, 2005).

Introduction
Fertilization is sequence of events that begins with contact between a sperm and an oocyte, resulting in fusion of two gametes and formation of a zygote (unicellular embryo). Site of fertilization is distal end of ampulla of fallopian tube (ampulla-isthmus junction) in mammals and in birds, is infundibulum. Only 1% of sperms deposited in vagina enter cervix. Movement of sperm from cervix to uterine tube occurs by muscular contractions of uterus & uterine tube and by their own propulsion. Immediately after ovulation, ovum is caught by the fimbriae of the infundibular part of oviduct and is brought to the ampulla.Cilia along epithelium of oviduct moves OCc. In farm animals (except swine) corona radiata cells drop off in ampulla. In swine, they persist and help in attachment of ova to each other in forming egg-clumps. The optimum fertilizable life of egg in most mammals is 12-24 hours after ovulation, but in dog it may extend up to 4 days.
Site of ejaculation is
Cow, primates, sheep, goat: Anterior vagina
Horse, pig: Body of uterus
Capacitation
Spermatozoa are not able to fertilize the oocyte immediately after arrival in female genital tract. To acquire fertility, they must reside there for a certain period of time. The changes that occur during this period constitute capacitation. Ejaculated spermatozoa must be exposed to secretions of female reproductive tract for a variable period of time before they attain capacity to fertilize oocyte. The secretions of uterus & oviduct participate in capacitation. Important processes during capacitation are: 1. Surface of spermatozoa in region of epididymis acquires certain molecules (proteins & carbohydrates in nature) and in seminal plasma, these molecules are masked by surface proteins. In female reproductive tract, these molecules along with surface proteins are removed. Removal of cholesterol and GAGs sperm cell surface.

Fertilizer (Control) Order, 1985 which is administered by Deptt.of Agriculture Cooperation, Govt. of India has been issued under the Essential Commodities Act, 1955. The FCO lays, down as to what substances qualify for use as fertilizers in the soil, product-wise specifications, methods for sampling and analysis of fertilizers, procedure for obtaining license/registration as manufacture/dealer in fertilizers and conditions to be fulfilled for trading thereof, etc.

Fertilizers are required where soils are deficient in plant food elements. When land is planted to crops over a long period of time, the plant food elements slowly get reduced and productivity of crop goes down. Sandy soil looses plant food elements rapidly because heavy rainfall or application of irrigation water leaches these elements out from the soil. Adding chemical fertilizer increases fertility of soil. Principally nitrogen, phosphorous and potassium are added to the soil to promote greater yields. Uniform distribution and proper placement of fertilizer in the soil have become increasingly important factor in providing maximum crop response at minimum cost. Placing the fertilizer near the seeds at the time of sowing results in more effective utilization of nutrients. In the row crops side dressing of fertilizer is done which has immediate benefit when placed in the moist soil within the root zone.

Fertilizer is a substance of natural or synthetic origin, applied to soils or to plant tissues (usually leaves) for the supply of one or more nutrients essential to the plant. It is classified in two types, inorganic fertilizers and organic fertilizers. Both the fertilizers play major role to the crops if they are properly and appropriately applied. To obtain maximum benefits, it is important to apply fertilizers at an appropriate time, amount and in a precise manner. The method of fertilizer application should be selected appropriately taking into consideration the age and stage of crop plants, their root extensibility, type of orchard management, kind and amount of fertilizers to be applied. The fertilizers should be given over the area of crop plants, where their active roots are spread. In fruit trees, fertilizer should be given in restricted area i.e. in the surrounding area of about 1 to 1.5 m away from the trunk of the trees in active root zone.

When to apply the fertilizers?

Majority of the crops require nutrients at different stages like growth & development, flowering and fruit setting time. In fruit crops, stages like new flushes emergence, floral buds differentiation and fruit development require more nutrients. Time of application of fertilizers may also vary depending on types of fertilizers, need of the crops, soil and climate.

Q. 1 Operating speed of power sprayer varies from
(A) 2 - 5 km /hr          (B) 4.8 - 8 km /hr
(C) 10 - 20 km /hr      (D) 20 - 35 km /hr

Introduction

Fertilizer efficiency is a critical factor in floriculture, the specialized branch of horticulture focused on the cultivation of flowers and ornamental plants. Floriculture is a highly intensive agricultural practice that requires precise nutrient management to ensure optimal plant growth, vibrant blooms and high yields. The efficiency of fertilizer use in this sector not only influences the quality and quantity of floral products but also has significant implications for economic viability and environmental sustainability.The global floriculture industry is expanding rapidly, driven by increasing consumer demand for f lowers and ornamental plants in both domestic and international markets. This growth necessitates enhanced agricultural practices to meet market needs while maintaining sustainable production systems. Efficient fertilizer use is paramount in this context as it directly affects the productivity, profitability and environmental impact of floriculture operations. Fertilizer efficiency refers to the ability to maximize plant nutrient uptake while minimizing waste and environmental degradation. Achieving this balance is crucial for sustainable f loriculture, as it helps reduce input costs, enhances plant health and mitigates adverse environmental effects such as nutrient runoff and soil degradation.

Knowledge of fertilizer dose, selection of fertilizer sources, time and method of application is essential for achieving efficient use of fertilizers and profitable yield.

A. Fertilizer Dose

Fertilizer dose for crops is determined based on the field experimentation. It varies with the crops and varieties, initial fertility of the soil, soil properties, cropping system, climate, season, rainfed or irrigated crop, expected yield etc. Fertilizer dose for rainfedcrops (Kg/ha)

Fertilizer N has been the key input in increasing cereal production throughout the world. In India, it made possible to achieve the yield potential of high-yielding dwarf varieties of wheat that led to ‘Green Revolution in 1968’. Nitrogen fertilization also increases protein content in wheat grains (Rajeswara Rao and Prasad, 1987) and leads to increased production of proteins in cereals (Prasad and Shivay, 2015). Cereal production in India increased from 42.4 million tonnes (Mt) in 1950–51 to 259.6 Mt in 2017–18, while fertilizer N application increased from 0.05 Mt to 16.96 Mt. However, the average agronomic ef?ciency of N (AEn) in India for cereals is only 9.5 kg grain kg–1 N (Sharma and Batra, 2011) as compared to global average of 24 kg grain kg–1 N for maize, 22 kg grain kg–1 N for rice and 18 kg grain kg–1 N for wheat (Ladha et al., 2005). Besides this, more disturbing is the fact that in irrigated areas the AEn declined from 13.4 to 3.4 kg grain kg–1 N during 1970–2005 (Biswas and Sharma, 2006). This is due to poor N management. Bulk of fertilizer N is applied broadcast on surface in most crops.

Fertilizers are applied to supplement nutrient requirement of the crop. It should not be looked as a substitute to organic sources. After determination of nutrient requirement of a crop fora given yield and contribution of nutrients from different sources, articularly, from the soil source, it is necessary to supplement the balance from the inorganic sources. These are determined by field experimentation supplemented by pot-culture, laboratory and green housestudies, if necessary. When a fertilizer is applied all of its nutrient (s) are not absorbed by the crop. The interactions between soil-crop-season and other factors are quite significant. Only a fraction of the nutrient(s) is utilized by the crop.

India’s economic prosperity is reliant on the agriclimate. The nation confronts particular challenges in guaranteeing food security and optimising agricultural yield because of its large and varied landscape. Using fertilisers strategically and sensibly is one of the main reasons Indian agriculture is so successful. Fertilisers are essential for preserving the fertility of the soil, improving crop health, and satisfying the nation’s growing need for food security.

Ensuring Soil Fertility

India’s economy is mostly based on agriculture, with a sizable section of the populace working in the field.However, there are significant regional differences in India’s soil fertility, with certain parts missing essential nutrients for crop growth.

Plant requires food or nutrients or elements for its growth and development which are absorbed through soil. Adequate supply of plant nutrients is important to ensure efficient crop production. Plant nutrients are essentially applied through manures and fertilizers. Application of manures and fertilizers to the soil is one of the important factors which help in increasing the crop yield and to maintain the soil fertility. 
Manures
Manures are plant and animal wastes that are used as source of plant nutrients. They release nutrient after their decomposition. These are relatively bulky materials, such as animal or green manures, which are added mainly to improve the physical condition of the soil, to replenish and keep up its humus status, to maintain the optimum conditions for the activities of soil micro-organisms and make good a small part of the plant nutrients removed by crops or otherwise lost through leaching and soil erosion.

Many materials can be applied to the soil as source of plant nutrients but the term fertilizer is often used to refer to relatively soluble nutrient sources with a high analysis or concentration. Commercially available fertilizers supply essential elements in a variety of chemical forms but many are relatively simple inorganic salts. Advantages of commercial fertilizers are their high water solubility, immediate availability to the plants, high concentration and low price per unit of nutrient, and the uniformity and accuracy with which specific amounts of available nutrients can be applied. Since they are relatively homogeneous compounds of fixed and known composition, it is fairly easy to calculate precise application rates and attain relatively consistent performance. This is in contrast to organic nutrient sources, which are a much greater challenge to manage because of their variable composition, variable nutrient availability and patterns of nutrient release that are greatly affected by temperature, moisture and other conditions that alter biological activity.

The solubility of commercial fertilizers can sometimes be a problem since soluble nutrients may move out of farm fields when applied in excess or large rains occur soon after fertilizer application. Soluble nutrients can be lost by leaching on well-drained soils and through tile outlets or in runoff on poorly drained soils. Denitrification can cause large losses of nitrate-N from water-saturated soils in wet springs.

Increasing soil cation exchange capacity by increasing organic matter reduces the movement and loss of some nutrients, although not nitrate-N (an anion). Management practices that synchronize nutrient availability with crop demand and uptake also minimize losses. Both application timing and the amount of fertilizer applied are important. Splitting fertilizer application into several small applications rather than a single large one is especially important to limit nitrogen leaching on well-drained sandy soils. Split nitrogen applications can also reduce nitrogen losses in runoff or from denitrification on poorly drained soils. Excess nutrient applications can be eliminated or at least significantly reduced by soil testing on a regular basis, setting realistic yield goals and fertilizing accordingly, accounting for all nutrient sources such as legumes, manure and other amendments and using plant analysis as a monitoring tool for the fertilizer program.

Potato plays a vital role in food security for ever increasing world population (Thiele et al., 2010; Scott and Sourez, 2011; Scott and Sourez, 2012). It is highly capital and labour intensive crop (Kushwah and Singh, 2011). Presently, India is the second largest potato producer in the world. India is producing about 45-48 million tonnes of potato annually from about 2 million hectare of area. However, India would require 125 million metric tonnes of potato from 3.6 million hectare area in 2050 (Vision, 2050). The stagnating growth rates of cereals’ productivity, large scale diversion of food grains to feed & bio-fuel and expected steep rise in per capita consumption of pulses, edible oil, fruits, vegetables, milk, sugar and non-vegetarian food in the regime of steadily rising population is bound to put pressure on existing cultivable land. Since, cultivable land is expected to remain more or less constant in the next 40 years, the role of crops like potato having higher production potential per unit land and time will become imperative. In this context potato crop has very high probability of making crucial contribution to the future national food security agenda. The perceived changes in Indian socio-economics in the medium and long term are expected to enhance per capita food consumption of fresh potatoes.

Fertilizer and nutrient recommendations for different crops are mostly region specific and very general in nature which results into a blanket application of fertilizer leading to its poor efficacy and wastage of costly resources as well as of environmental pollution. In addition, this has caused severe imbalance of nutrients in soil. The spatial variability of available nutrients properly mapped along with other relevant parameters will help to develop site specific nutrient management practices with increased productivity and profitability apart from checking nutrient imbalance and environmental pollution.