eChapters

Mensuration is derived from Latin word mensura which means measure. It means measurement of length, mass, time, etc. It is an art and science of locating, measuring and calculating the length of lines, areas of planes, and volumes of solids.

Forest mensuration is one of the most fundamental disciplines within forest and related sciences. It concentrates on trees and forests or potentially forested locations and deals with the measurement of trees and stands and the analysis of the resultant information. Forest mensuration also includes measuring or calculating growth and change in trees and forests. Forest mensuration thus may be defined as the art and science of providing the quantitative information about trees and forest stands necessary for forest management, planning and research. Chaturvedi and Khanna (1986) defined forest mensuration as a branch of forestry which deals with the determination of dimensions (diameter, height, volume, etc.), form, age and increment of single trees, stands or whole woods, either standing or after felling. According to the Society of American Foresters, forest mensuration is the determination of dimensions, form, weight, growth, and age of trees individually or collectively, and of the dimensions of their products (Helms, 1998). It is a tool that provides facts about the forest crops or individual trees to sellers, buyers, planners, managers and researchers.

Forest mensuration provides quantitative information regarding forest resources that will allow making reasonable decisions on its density, use and management. Forest mensuration serves the following objects

1.      Callipers are used to measure_____________. (Diameter)

2.      Biltmore stick is used to measure_____________. (Diameter)

3.      Wedge prism with 5 BAF and tallied 50 numbers of trees/ acre then basal area per acre is_____________ __________. (250)

4.      A ring count is most accurate in aging tree by using increment borer on _____________ of the trunk. (Lower region)

5.      False ring is a/an_____________ ring for a given year. (Second)

6.      A formula to determine diameter quotient for each form class is called_____________. (Hojer’s formula)

7.      The instrument used to determine the age of a tree is_____________. (Pressler’s increment borer)

8.      _____________ ,_____________ and_____________ are the variables required for general volume table preparation. (Diameter, height and form)

9.      The sampling method used in non-random sampling are_____________ ,_____________ and _____________. (Selective, Systematic and Sequential)

10.  _____________ formula is used for determining increment per cent. (Schneider’s)

Forest microclimate is the climate within a forest in contrast to a nearby open area created by a clearing or pasture. A robust observation is that less sunlight reaches the ground in a forest than in open areas, but this depends on the size of the clearing, the height of trees surrounding the clearing, and the location in the clearing (relative to the edge) where measurements are obtained. Daytime temperature is generally lower in forest than in open areas, with greatest differences during the growing season; but this, too, is subject to edge effects and whether the canopy is sparse or dense. Wind near the ground is less than in exposed areas or above the canopy. Another point is that there are various microclimates within a forest canopy. The environment of the forest overstory differs from that of the understory, and this has important consequences for species conservation and protection from climate change. The forest microclimate has important implications for habitat and biodiversity conservation and may act to buffer forest understory organisms from the severity of climate change. Forest microclimates differ not only in contrast with open land, but also vertically with position in the canopy (Fig. 8.1).

1. The process of harvesting, conversion and disposal of standing forest produce is called _____________. (Forest utilization)

2. Palmarosa grass oil is known as_____________. (Geranium Oil)

3. Terminalia chebula fruit tans is commonly called as_____________. (Myrobalans)

4. The gum resin_____________ is obtained from Garcinia morella. (Gamboges)

5. Black dammer is_____________. (Canarium strictum)

6. Rock dammer is_____________. (Hopea odorata)

7. White dammer is_____________. (Vetaria indica)

8. True dammer is_____________. (Agathis loranthifolius)

9. The Indian copal tree is_____________. (Vetaria indica)

10. The Indian gum arabica or babul gum is obtained from_____________ species. (Acacia nilotica)

1. Life history of Indian termite was first published by_____________. (J.G. Koeing)
2. Plant disease written by_____________. (R.S. Singh)
3. J. W. Helfer seems to have the first to collect insects because these were pest of trees during the year_____________. (1810)
4. The largest insect order is_____________. (Coleoptera)
5. Project directorate of biological control is located at_____________. (Bangalore)
6. Main skeletal structure to which most of the muscle attached is_____________. (Thorax)
7. The outmost waxy layer of insect body is called_____________. (Cuticle)
8. Insect body consists of series of segment designated as_____________. (Sclerite)
9. _____________ is the author of the book entitled “The ecology of forest insect”. (CFC Beesom)

The process of replacing the existing mature forest with a new generation of the forest trees is called forest regeneration. It can also be defined as process by which new tree seedlings become established after forest trees have been harvested or have died from fire, insects, or diseases. Forest regeneration is one of the basic tasks of foresters. Regeneration plays such a prominent role in silviculture that most silvicultural systems are named for their method of regeneration.

Abstract

Forests are the second largest land use after agriculture in India covers around 24% of the geographical area. The key tree species like Teak, Sal, Shisham etc are commonly used for timber purposes however the species like Eucalypts, Acacias, Poplar, Melia and Leucaena are mainly used under agroforestry system in India. The most of the genetic material (seed/planting stock material) used in forestry sector in India is obtained from unspecified sources, from stands, natural or planted, which are neither classified nor managed specifically for seed or planting stock material production.

ABSTRACT

The present communication deals with the impact and contribution on livelihood sustainability based on forest resources and sacred places in nine fringe villages of Pangolakha Wild Life Sanctuary (PWLS), located in Sikkim Himalaya. Populations density in villages varies from 23 at Nayabusty and 274 at Padamchen. Populations were categorised under three age groups viz. minor (15-25 yrs), major (26-36 yrs) and elder (over 36 years). Approximate by 27.6% populations had minimal primary education. Agriculture is the main activity in Suvaneydara (86.7%), Agamlok (85.3%) and in Nayabustyy (82.3%). Villagers in Padamchen (12.5%) and in Nathang (12.5%) are either dependent on Government job (38.2%) or seasonal flow of tourist (25%). The educational qualification in these villages is classes 5 to 10 standards. 91.1% of people rely on forest resources. About 70% of the villagers depicts that forest cover of the region is improving. The availability of fodders (70%) and fuel woods (60%) are still in abundance. People depend on tirja (private), khashmal and goucharan areas for grazing and fuel wood collection. Forty nine economical economically by valued plant species belonging to 46 genera and 35 families were documented. Subtropical ecosystems had high number of plant species. Poaceae was the dominant family (17%). Tree life form is abundant (51%). Total 24 species are harvested for edible purpose, 24% are freely sold in the local haats (market) for their livelihood sustenance. Principal Component Analysis (PCA) of nine villages with respect to forest resources indicated the village specific use pattern of plant resources. Indigenous inherent knowledge of local plants is decreasing in Lingtam. PWLS and its adjoining villages have important places with religious importance, heritage sites managed by the people. It was observed that exploitation of plant resources, lack of maintenance and fast changing concept of traditional ethics among youths, plant resources were degraded and in regenerating stage.

6.1 Introduction

The state of India’s forests is important in many ways, whether it be as a source of fuel and fodder for rural citizens, of industrial inputs for a growing economy, as a habitat for thousands of plant and animal species, a sink for carbon dioxide emissions, or as a protective cover for its soils.

The forest resources forms an ecological system consisting of tree dominated vegetative associations. Forests not only provide timber, fuel wood, pulpwood fodder and fiber grasses, and non wood forest produce and support industrial and commercial activities but also maintain the ecological balance and life support systems essential for food production, health, and all round human development. The innate complexity and inherent diversity of forest ecosystems make it difficult to establish clear cause-and effect relationship or to predict the outcomes of a given intervention accurately. Figure 6.1 shows that the percentage of land mass with forest covered and non forest area in India

Abstract

Knowledge of  seed biology is crucial for proper management of  seed sources as well as the handling of seeds. In broadest sense seed technology includes the development of superior crop plant varieties, their evaluation and release, seed production, seed processing, seed storage, seed testing, seed certification, seed quality  control, seed marketing and distribution and research on various aspects. Vegetative propagation has also become popular for the propagation of some tree species, but seed propagation remains the principal mode of propagation in both the temperate and the tropical region. Forest plantations are a powerful tool in the continuing efforts of foresters to increase productivity per unit area apart from mitigating the climate change and global warming issues. Hence to improve the existing stock in terms of yield, quality, disease resistant and desired traits, seed technology can play a major role in providing quality genetic material.

Abstract
Better seed production technology is vital to furnish quality seed of improved varieties. Trees are generally propagated from seeds and the suitability and quality of the seeds have a big effect on the success of the plantations, afforestation and reforestation programmes raised from them. It must be stressed that good seed implies seed which is both of high viability and vigour and is genetically well suited to the site and to the purpose for which it is planted. The use of sound seed from stands of high inherent quality is widely recognized as the best means of ensuring fast-grown and healthy plantations capable of yielding high quality wood. Quantity, as well as quality, of seed production is important. Seed quality depends on factors like source, time and techniques of harvest, processing and storage practices. Unlike agriculture, the forestry seeds have great variation in size, shape, dormancy, viability, moisture content, etc.

This chapter introduces the principles and practices involved in the collection, processing, evaluation, storage, and management of forest seeds. It examines forest seed biology and variability, seed quality and viability assessment, seed dormancy, and methods used to overcome dormancy. The chapter also addresses seed handling, storage, pest management, certification, and the integration of seed technology with genetic improvement programmes. By connecting seed quality with successful regeneration and tree improvement, the chapter provides a foundation for producing healthy and genetically suitable planting material for forestry and conservation programmes.

Abstract

Seed is the most important input component for productive forestry. Large quantities of quality seed are needed every year to raise the nursery stock for propagating the desired plant species.  Commercially important species like Dalbergia sissoo, Eucalyptus tereticornis, Pinus roxburghii and Populus deltoides have become more important. Superior genetic qualities of seed have profound positive impact on growth rates and productivity of plantations and quality of the produce. To save and multiply the entire lot of valuable forest plants it is very essential to preserve and multiply those plants for which special type of nurseries are to be established. There is necessity to have special techniques and methods to meet the demand of seed and only hi-tech nurseries can satisfy this type of demand.

1. Forest soils are_____________ in nature. (Acidic)
2. The term soil originated from latin word ‘Solum’ which means_____________. (Floor)
3. Most commonly used sources of N fertilizer in forestry is_____________. (NH₄)₂SO₄
4. _____________ is considered as the father of pedology. (V. V. Dokuchaev)
5. _____________ is considered as father of soil testing. (Troug)
6. Land capability class was given by_____________ and_____________. (Klingebiel and Montgomery)
7. The law of the minimum was given by_____________ in 1862. (Liebig)
8. Law of restriction was proposed by_____________. (Liebig)
9. The soil structural classification followed in India is according to_____________. (USDA)