eChapters

Key words : NRSA, Natural Resource and Disaster Management, Agricultural Drought, Ecosystems, Biodiversity Information System, Water Resources, Sea Surface Temperature.

Introduction

A few decades ago, paper maps were the principal means to synthesize and represent geographic information. Manipulating this information was limited to a manual, non-interactive process. Since then the rapid development of new technologies to collect and digitize geographic data, together with an increasing demand for both interactive manipulation and analysis of this data, has generated a need for dedicated software’s namely geographic information systems (GISs).

A GIS is more than a cartographic tool to produce maps. It stores geographic data, retrieves and combines this data to create new representations of geographic space, provides tools for spatial analysis, and performs simulations to help expert users to organize their work in many areas like public administration, transportation networks, military applications and environmental information systems. These above mentioned are few among many others where we are concerned with geographical locations, their present status, its potential for developmental activities, patterns of change over the years and the processes on the surface of the earth.

Geographic information technology is used to manipulate objects in geographic space, and to acquire knowledge from spatial facts. Spatial information theory provides a basis for GIS by bringing together fields that deal with spatial reasoning, the representation of space, and human understanding of space.

Key words : Flood Plains Agro-ecosystem, GIS, RS, Spatial Cropping Pattern, Radiometric Normalization, NDVI, Agricultural Systems.

Introduction

Of late, evidence is accumulating to suggest that high productivity and growth rates achieved during the Green Revolution era in the well-endowed regions of the country (i.e North West India) are no longer being sustained to meet the needs of still increasing population in the country. Past growth sources have nearly exhausted and there is also no scope for expansion of crop land. Indeed pressure for competing land uses will likely reduce area under food grain crops. Shrinking natural resource base (per capita availability of land and water devoted to agriculture), declining quality of resources and environmental degradation issues will imply increasing threat to our ability to meet the basic needs of the growing population of the region unless we shift our effort to potential regions like flood plains of the country for improving productivity.

The flood plain riverine lands of India covering approximately 42 m.ha though most endowed with natural resources and has all the potential of becoming rich, is still economically backward. The reason behind this paradox of extent of poverty in the midst of richness of resources is that the natural resources of the region are not being productively harnessed into the process of the economic development and thus are not delivering their potential and commensurate benefits to the people. The Green Revolution technologies evolved during of 60’s and 70’s had little or no impact in this region of the country. Undesirable spatio-temporal distribution of flood in these areas keeps agriculture under uncertainty and risks. These are also the areas where the poorest are concentrated and agriculture largely continues to be more of subsistence. The nature of agricultural problems are highly variable due to great diversity in the production system as also in the socio-economic conditions of the communities requiring location specific approaches to address the problems and enhance the productivity.

Key words : Glaciers, Glacial Lakes, Glacial Lake Outburst Floods (GLOF), Himachal Pradesh, Glacial Inventory, Glacier Recession.

Introduction

Glaciers are large masses of snow, re-crystallized ice and rock debris that accumulate in great quantities and begin to flow outwards and downwards under the pressure of their own weight. Glaciers form when yearly snowfall in a region far exceeds the amount of snow and ice that melts in a given summer. In this way, massive quantities of glacial material accumulate in relatively small periods of geologic time. The glaciers exist in environments of high and low precipitation and in many temperature regimes; they are found on all the continents except Australia and they span the globe from high altitudes in equatorial regions to the polar ice caps. Presently, 10% of the Earth’s land area (5.8 million square miles) is covered with glaciers storing about 75% of the world’s freshwater. However, during the last Ice Age, glaciers covered 32% of the total land area of the planet.

Introduction

Precision Farming (PF) revolves around the idea that any agricultural land contains wide spatial variations in soil types, nutrient availability, and other important factors. If these variations are not taken into account, then there may be a loss in productivity. Precision farming is one of the most scientific and modern approaches to sustainable agriculture that has gained momentum in 21^st century. Consider the situation: ‘A farmer goes to his/her field with his/her Global Positioning System (GPS) guided tractor. The GPS senses the exact location of the tractor within the field. It sends the signal to a computer on the tractor that has a Geographical Information System (GIS), storing the soil nutrient requirements map in it. GIS, in consultation with a Decision Support System, decides what is the exact requirement of the fertilizer for a given location and then commands a variable rate fertilizer applicator, attached with the tractor, to apply the exact dose at that precise location. All this is done within a second, before the tractor moves further.’ This may sound like an excerpt from a scientific fiction, but this is what precision farming means to the large growers of the United States or European countries and day is not far off when it will be feasible for large Indian farmers as well.

PF refers to a developing agricultural management system that promotes variable management practices within a field according to site or soil conditions. Within a short span of time, this concept has been described with various names viz. farming by soil; farming soil, not fields; farming by the foot; spatially prescriptive farming; computer aided farming; farming by computer; farming by satellite; high-tech sustainable agriculture; soil-specific crop management; site-specific farming; and site-specific crop management.

Key words : Wasteland Reclamation, Poverty Indicators, Food Insecurity, Alternate Livelihood Systems, Rural Infrastructure Index.

Introduction

The countries of Asia and the Pacific region accounts for nearly two-thirds of the chronically poor and undernourished in the world. FAO estimates indicate that, by 2010, Asia will still account for about one-half of the world’s malnourished population (FAO 2000). In Asia, poverty has mainly been rural phenomenon and nearly three-fourth of the poor live in rural areas, with large majority of them dependent on natural resources for employment and income. South Asia, which had a poverty incidence of 43 percent (or about 520 million people), contributed about 40 percent of the world’s poor. Development of natural resources thus offers a potentially enormous means of poverty reduction.

In developing countries poverty and environmental deterioration are often viable in proximity to each other, and have led many to infer that a two-way causality exists between human and environmental degradation. Environmental degradation usually occurs when production and consumption activities of growing population irreversibly weaken nature’s recycling capabilities. These economic activities are also attributed to the development of markets, the advent of modern technology, and the spatial integration of inaccessible areas to market systems. In many developing countries, however, environmental degradation such as soil erosion, deforestation and pollution are most visible around poor settlements, leading some policy makers to highlight the direct links between poverty and the environment.

One has to recognize that both poverty and the environment are descriptions of states of human and natural resource attributes and cannot be reduced to simple one-dimensional cause-effect relationships. Apart from conceptual difficulties in modeling linkages, another handicap has been the absence of adequate or reliable data sets on poverty and environment characteristics. The challenge for operational research is exploring how circumstantial evidence and inductive logic can be used to explain the nature of interactions between the two states. Based on nationwide wasteland statistics vis-à-vis state and district wise poverty estimates available with the concerned agencies, this study is one such attempt, and evaluates the incidence of poverty with the backdrop of natural resources degradation and role of institutional interventions with illustrations from India.

ABSTRACT

The geological and geomorphological features could be clearly demarcated in and around Salem area using IRS -IB LISS II satellite data. Geologically,the study area is classified into four major rock types fissile hornblende biotite gneiss, banded magnetite quartzites, peninsular gneiss, charnockites and quartzites. The geomorphological study reveals the buried pediments medium, buried pediments deep, bazada zone, along with lineaments. Intersections of the lineaments are the most prospective zones for further groundwater targeting. Shallow pediments and pediments are the less groundwater prospective zones. But detailed geophysical survey as required to sink new bore well, dug well, dug cum bore wells.

India is a geologically diverse country with a wide variety of rock types. The major rock types found in India can be broadly classified into the following categories:

Igneous Rocks: These rocks are formed from the solidification of molten magma. They can be further divided into two types:

1. Plutonic (Intrusive) Igneous Rocks: Examples include granite, diorite, and gabbro. These rocks are formed deep within the Earth's crust and have a coarse-grained texture.
2. Volcanic (Extrusive) Igneous Rocks: Examples include basalt, andesite, and rhyolite. These rocks are formed on the Earth's surface from volcanic eruptions and have a fine-grained texture.

Sedimentary Rocks: These rocks are formed by the deposition and consolidation of sediments over time. They can be further divided into various types based on their composition and mode of formation:

1. Clastic Sedimentary Rocks: Examples include sandstone, shale, and conglomerate. These rocks are formed from the accumulation and lithification of fragments of pre-existing rocks.
2. Chemical Sedimentary Rocks: Examples include limestone, dolomite, and rock salt. These rocks are formed from the precipitation of minerals from water bodies.

Abstract

Landslides have become a recurring phenomenon in most of the mountainous regions of the world. In Indian peninsular, the landslides which were mostly confined to the tectonically active Himalayan Mountains once, have started spreading over to the other mountain belts of the Peninsula. The Tirumala – Tirupati hills, which is drawing millions of pilgrims from all over the world is facing landslides especially along the newly built southern uphill Ghat Road. The geology of the area, studied using geomatics tools like Remote Sensing, SRTM based Digital Elevation Models, GPS Survey, etc., showed that Tirumala hills is under the grip of upward tectonic movement as evidenced from the N-S and E–W oriented Pleistocene faults, intensely dissected Plateau top Cuddapah Quartzites, retreating escarpments, exhaustive debris slopes, extensive valley fills along the slopes, colluvial fills in lower slopes, palaeo debris flows along the southern and western obsequent slopes of the Tirumala hills etc. All these indicate the inherent landslide vulnerability of the slopes. The E-W trending dykes which are piercing the slopes and standing as ridges add further landslide vulnerability to such fragile slopes. So, the new ghat road laid along such southern slope is obviously facing landslides. However, the detailed geomatics based studies show that the dykes, valley fills and steep slopes are particularly more vulnerable to landslides. Though remedial measures have been broadly evolved, abandoning the southern uphill new ghat road and widening the older northern downhill ghat road seems to be the better and long term feasible alternative to prevent Landslides.

Abstract

Landslides have become a recurring phenomenon in most of the mountainous regions of the world. In Indian peninsular, the landslides which were mostly confined to the tectonically active Himalayan Mountains once, have started spreading over to the other mountain belts of the Peninsula. The Tirumala – Tirupati hills, which is drawing millions of pilgrims from all over the world is facing landslides especially along the newly built southern uphill ghat road. The geology of the area, studied using Geomatics tools like Remote Sensing, SRTM based Digital Elevation Models, GPS Survey, etc., showed that Tirumala hills is under the grip of upward tectonic movements as evidenced from the N-S and E-W oriented Pleistocene faults, intensely dissected Plateau top Cuddapah Quartzites, retreating escarpments, exhaustive debris slope, extensive valley fills along the slopes, colluvial fills in lower slopes, palaeo debris flows along the southern and western obsequent slopes of the Tirumala hills etc. All these indicate the inherent landslide vulnerability of the slopes. The E-W trending dykes which are piercing the slopes and protruding as ridges add further landslide vulnerability to such fragile slopes. So, the new ghat road laid along such southern slope is obviously facing landslides. However, the detailed Geomatics based studies show that the dykes, valley fills and steep slopes are particularly more vulnerable to landslides. Though remedial measures have been broadly evolved, abandoning the southern uphill new ghat road and widening the older northern downhill ghat road seems to be the better and long term feasible alternative to prevent Landslides in the area.

2.1 Introduction

Topographic expression is the replica of geological structures present within the earths surface. When various types of rocks of an area are displayed on a map (sheet of paper), it is known as Geological Map. Normally geological maps prepared on topographic maps. Surface topography is best presented by contour lines on a plain paper.

The importance of geological maps is to understand the nature of structure and distribution of surface outcrops with their relation to contour lines. Horizontal and dipping beds are easily identified on map because, horizontal beds runs parallel to contour lines while inclined beds cut through different contours. The angle and direction of dip can be calculated from geological maps. Geological maps are of great importance to civil engineers, after studying geological maps and consultation with geologists, civil engineers can advice for construction of engineering structures like excavation of road cuttings and construction of canal, bridges, dams and tunnels etc. Geologists get vital clues about the geological history of an area, and can draw a cross section of an area and know the structure present underground.

ABSTRACT

The Cretaceous formation of Ariyalur area is well known for its lithological and faunal variation. It contains rich assemblages of fossils as well as the occurrence of economic deposits of limestone, gypsum, phosphatic nodules and clays. Representative Uttatur clay samples have been collected and analysed for physical and chemical properties. The physical properties such as fired colour, plasticity, fusing temperature, slaging nature, shrinkage test, bulk density, liquid limit, and plastic limit and Atterberg number etc. of uttatur clays have been determined. The chemical properties of the clays show low in silica and alumina and high iron and lime which make them suitable for low duty refractories and stoneware works.

Introduction

Earth’s magnetic field (MF) is a natural component of environment and is an inescapable factor for all living organisms including plants. Earth has an inner core made of molten iron which rotates at a fairly high speed creating a magnetic field just like a dynamo. This Geo Magnetic Field (GMF) extends from the earth’s interior into outer space. It interacts with the solar wind, which is actually a stream of charged particles emanating from the sun. As earth is engulfed in a GMF, all living organisms, both plants, animals and all biological processes are under its influence. However, local differences in strength and direction of the geomagnetic field have been detected. The vertical component of GMF is maximum at the magnetic poles, which is around 67 μT, and the horizontal component is zero there. Conversely, at the magnetic equator the vertical component is zero and the horizontal component is maximum, about 33 μT (Kobayashi et al., 2004).

Turbulent flows of the fluid metallic inner core of earth mainly contribute to GMF and the effect of external MFs located in the ionosphere and the magnetosphere is very meagre (Qamili et al., 2013). As GMF extends beyond the earth’s surface it is this force along with magnetosphere that protects the earth and its biosphere, from the solar wind by deflecting most of its charged particles (Occhipinti et al., 2014).

Abstract

The Pudukkottai district located in the southeastern tip of Tamil Nadu, India provides a complex geological setting with three litho-tectonic blocks membered by the hard Crystalline rocks of Archaeozoic-Proterozoic Era in the west,Mio-Pliocene Sandstone/Cuddalore Sandstone in the centre and Quaternary sediments in the east. While the western and central blocks are separated by a well-defined NNE-SSW trending fault, the central Mio-Pliocene Sandstone block is cut into two parts by a N-S fault with western static block and the eastern uplifted counterpart. Besides the above, the various drainage anomalies viz; Annular, Deflected and Eyed drainages and compressed meanders interpreted using the raw and digitally enhanced satellite multispectral data show that the N-S oriented faults with oscillations from NNW-SSE to NNE-SSW, NE-SW and E-W orientations are tectonically active in the area. The integration of these active faults with known geothermal springs and the maxima axes drawn from the contours deducted from the temperature of groundwater measured during the predawn hours from the wells revealed that the N-S and NE-SW faults are the probable locales for geothermal resources in the study area. Thus the study demonstrates a newer methodology for locating the geothermal prospects.

Abstract

Geomorphology not only provides the panorama on the external architecture of the Earth surface, but also it is the record of the past geological events including the climate, especially of the Quaternary period. Detailed geomorphology map was prepared using the IRS LISS IV FCC and SRTM data showing the tectonic, denudational and fluvial landforms of Kollai hill, Eastern Ghats, Tamil Nadu. The geomorphic features showed that the Kollai hill can be divided into two as northern and southern blocks separated by a NE-SW active sinistral fault in the overall N-S rectangular hill. The integration all the geological , structural and geomorphic features show that the Kolli hill is under the grip of uplift in the south west with hinge towards north easterly. Because of this, the northern block/rim of the hill is fragmented into a series of East-West trending fracture/ fault swarms which are sympathetic tectonic grains to the Attur graben rimming the Kollai hill to its north. This phenomenon seems to control the overall resources and environment of the hill.

Introduction

The mountains are not only the store houses of natural resources like minerals, water, geothermal springs, forest & biomass etc., but also possesses unique & self-styled ecosystems drafting the mankind from the plains for comfort and livelihood. Further, the tourists are highly attracted by the mountain regions due to the ecosystems, climate and scenic beauty. Due to all these, the resources of the mountains are exponentially exploited during the recent 6–7 decades thus causing phenomenal depletion of natural resources and initiation of chains of environmental disorders, viz., deforestation triggered soil erosion, landslides, debris dumping along the slopes and foot hills, sedimentation of the downhill reservoirs & drainages, all of which in turn induce haphazard flooding. Hence, the Union and various Federal Governments have started working on the restoration of the ecosystems of their respective mountain regions in several nations. In the Indian sub- continent too, both under the Centrally sponsored schemes and the State funding, number of Hill Area Development Programmes have been initiated and going on especially in Himalayas, Easternghats and Westernghats. The state of Tamil Nadu possesses both Easternghats and Westernghats. While the Westernghats are found along the western part of the state with NNW-SSE orientation, the Easternghats represented by the Kollai- Pachhamalai hills, Shevroy - Chitteri – Kalrayan hills and Javadi hills, aligned in N-S direction, are traversing the Central part of Tamil Nadu. To comprehensively understand the resources, hazards potential, the ecosystems and also the modern geological processes which only control and tutor them, a geomatics based study was carried out in Kollai hills so that it can be used as a reference study to all those who are engaged in eco-restoration and hill area development programmes in India.

Abstract

Geomatics (Remote Sensing and GIS) based tsunami damage assessment was carried out for Nagapattinam coast as a part of All India Coordinated Programme of NRDMS, Department of Science and Technology, New Delhi. The paper discusses the methodology and the inferences made for Nagapattinam region, Sirkali block and north Poigainallur panchayat village, holistically for the former and as case studies for the latter two. The regional studies show that the coastal geomorphology has played a significant role in tutoring the tsunami inundation and the damages with beach, dunes, tidal flats, backwaters and rivers / streams facilitating the inundation of tsunami. The studies in Sirkali block show the similar role of geomorphology, but the damage assessment carried out for Water bodies, soil and ground water show appreciable damage to Aquifer in the form of saltwater mixing / intrusion due to tsunami. Detailed geospatial data bases were generated village wise too. On the basis of the studies, possible remedial strategies were also suggested.

Keywords: Remote Sensing, GIS, Tsunami 2004, Damage Assessment, Tsunami mitigation, Nagapattinam.

Abstract

The Tamil Nadu is one of the leading states in groundwater development. Since the surface water resources have been fully exploited for irrigation, the groundwater is massively mined for agriculture, domestic and industrial purposes. The paper provides a synthesis of whole groundwater related issues including basin wise groundwater conditions, the aquifer types, geogenic water quality and quality deterioration due to anthropogenic activities, need for recharge, the utility of Remote Sensing & GIS etc. The paper has come out with set of recommendations as the concluding remarks.

Abstract

Landslides have become a fast spreading epidemic in the mountain belts around the world. As both the natural geosystem and the triggering parameters this phenomenon, the scientists & technocrats from all over the world have started studying it using varying parameters and multivariate advanced scientific tools. In this connection the present study lays an emphasis on the need for giving deserving importance to one of the important geosystem parameters, namely the geomorphology in Landslide Vulnerability Mapping. The same has been accomplished by taking the Nilgiri Mountains of Western Ghats, South India as the test site.

Introduction

Landslides are the most commonly witnessed geohazards in mountainous systems of all over the world causing greater and recurring loss to Man, his properties and to his various developmental programmes. As these landslides mostly occur after heavy rainfalls, it was considered as the most important triggering parameter for the landslides. In indian subcontinent, the landslides of Himalayan region while were inferred to be predominately due to Active tectonics (1,2,3,4,5,6,7,8,9,10) landslides of Westernghats of Maharastra were explained to be the effect of extensive weathering and the rock falls from the cliff and the summit zone (11,12) but in contrast, the landslides of Nilgiri mountains have been attributed to deforestation, direct entry of rain water into the soil system and the resultant pore pressure increase (13,14,15,16,17,18,19,20,21) but the studies carried out (22) in the Nilgiri Mountains indicated that various geosystem parameters viz: Lithology, Structure, Geomorphology, Slope etc., occur in various permutations and combinations and assign different landslide vulnerability grades to the land systems and when such vulnerable zones are interfered by the triggering parameters, the landslides occur.

Geomorphological mapping is the process of creating detailed maps that illustrate the physical features of the Earth's surface, including landforms, soil types, vegetation, and water resources. These maps can be used to better understand the underlying geology and topography of a region, and can be used for a variety of purposes, such as land-use planning, environmental management, and geological hazard assessment.

Geomorphological maps are typically created using a combination of field observations, aerial photography, and remote sensing data. Field observations involve physically visiting a site and making detailed observations of the landforms, soil types, and vegetation. Aerial photography involves taking high-resolution photographs of the Earth's surface from an airplane or satellite, which can be used to create detailed maps of the area. Remote sensing data can also be used to create geomorphological maps, including data from satellites, radar, and LiDAR (Light Detection and Ranging) systems. These technologies allow scientists to gather data about the Earth's surface without physically visiting the site, and can provide highly accurate information about the topography, geology, and vegetation of an area. The resulting maps can be used for a variety of purposes, including land-use planning, natural resource management, and hazard assessment. For example, geomorphological maps can be used to identify areas of high risk for landslides, floods, or earthquakes, and can be used to develop strategies for managing these hazards.

Introduction

Geomorphology is the study of earth’s landscapes over time and space, and involves an analysis of both its surface features as well as the processes responsible. Historically, the subject evolved through monumental studies on supposed evolution of the landscape, based on intuitive knowledge of the researchers on landscape response to endogenic and exogenic forces, as well as visions of possible changes over a time scale of centuries to millennia or more. Too much emphasis on the study of possible landscape evolution in an era of little technological back-up facilities meant that the discourses were largely philosophical in nature, with fewer measurable parameters to substantiate the concepts or the reasoning, although reflecting deep understanding of the researchers involved. As older concepts began to be confronted with newer ones, and applied aspects started receiving greater attention, a need was felt for quantification of the features and processes. This was more so for an understanding of the fluvial landscape, although aeolian and other process-based studies also gradually incorporated quantitative analysis as a means of understanding the landscape. Despite the awareness, lack of adequate equipment hindered the progress of quantification in the pre-World War II period.

1.1 Geomorphology

Geomorphology is the scientific study of the origin and evolution of topographic and bathymetric features created by physical or chemical processes operating at or near the earth's surface.

The surface of the earth is unstable and affected by a combination of surface and geologic processes that cause tectonic uplift and subsidence. Surface processes are mainly physical and chemical action of water, wind, ice, igneous activity and activities of living organisms on the surface of the earth. Upliftment of mountain ranges, the growth of volcanoes, isostatic changes in surface elevation and formation of deep sedimentary basins are categorized under Geological processes.

Main geomorphological processes occurring in nature are as follows:

1.1.1 Aeolian processes

Aeolian processes include activities of the winds, its ability to shape the surface of the earth. Wind acts as an effective agent of erosion, transportation and deposition materials, and large supply of fine, unconsolidated sediments. Aeolian processes are important in desert (arid) environments.

1.1.2 Fluvial processes

Moving water in a river channel, is able to mobilize sediment and transport it downstream. The rate of sediment transport depends on the availability of sediment itself and the discharge by river.

River originates from mountain with V shaped valley, which later increases in size, merging with other rivers. The network of rivers thus formed is known as drainage system. These systems show four general patterns viz. dendritic, radial, rectangular, and trellis etc. In the mature stage, the river form alluvial flood plains, meanders and ox-bow lakes. Finally when it merges to ocean, forms delta.