eChapters

19.1 Introduction
Mulberry silkworm, Bombyx mori, is affected by a number of diseases caused by viruses, bacteria, fungi and protozoa. These illnesses are recognized to occur in practically every region where silkworms are raised in the world seriously harming the harvest of silkworm cocoons. Several actions have been proposed as a means of preventing and managing the illnesses, but none of them had shown signs of foolproof with the outcome that one must consistently be cautious to eradicate the core infection’s source in addition to avoiding crossinfection. Additionally, care has to be taken in order to ensure that they are not exposed to stressful circumstances such as low temperature and inadequate nourishment, poor ventilation, and humidity which could lead them easily susceptible to various diseases.
19.2 Diseases of Mulberry Silkworm and Their Control
19.2.1 Protozoan Diseases
The protozoa that harm silkworms are the parasitic ones from the genera Nosema, Pleistophora, and Thelohania and class Microsporidia. In addition to this, reports of Leptomonas and Trypanosoma infections in the silkworm
Bombyx mori L. have been made. However, the pebrine disease is the main protozoan illness of the silkworm. It is also known as ‘pepper disease’ because of the development of areas of black pepper after infection.

18.1 Introduction
The cocoons are harvested and sold to the reeling agencies. Harvesting has to be done after the sclerotization of the pupal cuticle and before the emergence of adult moth. It has been recommended to harvest at the fifth day of spinning for tropical races and seventh or eighth day for temperate races. Delay in harvesting leads to pierced cocoon by the emerging moth and early harvesting causes injury to the unsclerotized pupa and thereby soiling the cocoon. The cocoons are normally harvested by hand or by simple devices. Faecal pellets if any on them must be removed and cleaned. Healthy cocoons must be separated from the defective ones and sorted out based on their size.
18.2 Harvesting of Cocoon
After completion of spinning of cocoon, the larval skin is cast off and pupation takes place. This generally occurs on the 3rd/4th day of spinning in the case of multivoltines and 4th/5th day of spinning in bivoltines and univoltines in the temperate regions. The pupa when formed has a thin cuticular skin which is soft to touch and may get ruptured easily, if disturbed. Too much delay in harvest is also not desirable, as it reduces the weight of cocoons. Harvesting of cocoons is normally done by hand. Only in the case of revolving mountages simple devices are used. The harvesting process is the best time for sorting cocoons according to the quality as good cocoons are easily distinguishable from double and defective cocoons.

17.1 Introduction
The most important device that helps or supports the silkworms (larvae) for comfortable spinning their cocoon is called cocoonage or mountage. It determines both the quality and quantity of the cocoons. Different types of
cocoonages are used in different parts of India. In general, these are made of wood, bamboo, cardboard, plastic, grass, dry leaves, twigs, etc.
Mounting is an essential step in the rearing of silkworm. Mounting indicates the transition of silkworm from larval stage to pupal stage where it prepares to spin cocoons. Mounting is a process where fully grown (specifically 5th instar) silkworm larvae are picked and mounted in a suitable place (mountage) where it is about to spin. Mounting is a pivotal phase in silkworm rearing.
The following are the objectives of mounting:
1. To provide an ideal space for silkworm larvae to spin,
2. To ensure good quality cocoons,
3. To minimize mortality among silkworm by avoiding overcrowding,
4. To ensure a maximum silk production.

16.1 Process of Ripening of Worms
Closer to the end of the fifth stage, the silkworm stops ingesting and turns into the so-called mature larva and starts spinning the cocoon. Properly reared worms, when ripe, will attempt to spin true cocoons even below incorrect conditions. However, it needs to be remembered that the worm spinning the cocoon is to defend itself from outside disturbances and enemies all through the maximum crucial period of its metamorphosis. The rearer can get the reward for his labour most effective, if he cooperates by making the situations such that, through spinning a commercially good cocoon it also most correctly protects itself. This cooperation is composed in imparting the ripe silkworm with appropriate mountages to facilitate its spinning of suitable cocoons. The eating duration throughout the fifth instar may close for 5 to 7 days in the case of multivoltine and bivoltine races in the tropical regions and 7 to 9 days in the case of bivoltine and univoltine races in sub-tropical areas. The mature worm is effectively distinguishable by its translucent colour. The frame also shrinks with duration; there is also a constriction seen on the 4th and 5th segments. The worm loses appetite and begins to look approximately as although on the lookout for a appropriate area to which to attach itself. Generally, the ripening worms circulate in the direction of the periphery of the rearing trays in search of anchorage to begin spinning of cocoons. This is the time for selecting the ripe worms and putting them on mountages. This process is known as ‘mounting’. It has to be remembered that all the worms in a tray do not ripen simultaneously. It commonly happens that by the time all the worms in a tray are ripe, a number of the early worms can be over-ripe. They could have misplaced a quantity of silk by the point they are picked up, and they are furthermore in a hurry to spin their cocoons that they continue to do it anyways, without ready to select a right location, and as a consequence produce irregularly formed and flattened or sticky cocoons causing loss to the rearer.

15.1 Silkworm Bed Cleaning
Bed cleaning is an important silkworm rearing process to ensure the hygiene in the immediate vicinity of silkworms in order to protect from disease infection and to ensure them good feeding appetite. Hence, timely bed cleaning is critical to maintain the worm
In a study observation on larval mortality, larval period, single cocoon weight, shell weight, length of silk thread and silk ratio were carefully noted for each treatment and replication. Three replications were used for each treatment of different eri silkworm races. Treatments were once bed cleaning frequency per day, twice bed cleaning frequency per day, and three times bed cleaning frequency per instar of Vietnamese eri-silkworm races, Indian eri silkworm races, Kenyan bivoltine silkworm races, Korean bivoltine silkworm races, and Vietnamese multivoltine silkworm races. Long spinning silk thread, robust silk cocoon and shell weight and higher percentage of silk ratio of silkworm races were registered from one time bed cleaning frequency per day and two times bed cleaning frequency per day. The rearing tray of silkworms accumulates some unconsumed leaves after each feeding, exuviae after moulting, excreta, dead or diseased larvae, etc. All these if not cleaned, combine to form a thick and damp litter which promotes the growth of different micro-organisms, generation of heat and injurious gases and depletion of oxygen. Hence, it is very necessary to remove the litter periodically and the process of its removal is called bed cleaning.

In sericulture it is the larval life that is of direct importance to the rearer since he has to take care of the worms very carefully. The larval life may last from 20-24 days in the case of the multivoltine species in tropical areas or 24-28 days in the case of uni- and bi-voltine races in temperate areas, being shorter under warmer summer and autumn conditions, and somewhat longer under cooler spring conditions. During the larval life the worm moults or casts off its skin four times to be able so as to grow. There are also varieties of worms which moult three and five times but they are not of importance economically. In view of the four intervening moults, the larval life is divided into five distinct stages or instars (Fig.14.2) which are referred to popularly as five different ages. The first three instars are referred to as young ages and the fourth and fifth instars as late ages.
14.2 Moulting
Each larval instar can be broadly divided into two phases i.e., the feeding phase and the moulting phase. After feeding voraciously and having attained full growth for the particular instar the worm loses its appetite and the larvaprepares to moult and cast off its old skin. Prior to each moulting, the larva  stops feeding and rests with its head held up. The lustrous body skin gradually becomes translucent, loose and wrinkled and the worm becomes dull in appearance and wanders about in search of a resting place. It emits a silky substance with which it fixes itself to dry leaves. The moulting periods last for 20 hours being shortest in the second moult, followed by the first, third and fourth. This resting for moulting is often referred to as going to sleep and the coming out of the worm from moult as waking up. During the moulting period the worms should not be disturbed so that the process of moulting is not interfered with and uniform moulting is ensured.

13.1 Incubation
The silkworm eggs are to be incubated properly to avoid irregular hatching. An ideal incubation is to maintain a temperature of 25oC and 75-80% humidity continuously. In most of the places incubators are not available. In such cases, the eggs are kept spread in wooden trays provided with paraffin paper for base and the cover and foam pads kept wet all around inside the trays to maintain 70-80% humidity. In each chawki tray of 90 cm × 120 cm about 4 sheets of eggs can be kept for incubation. The room temperature is maintained at 25°C. On 9th day the egg sheets are rearranged. About 25 dfls (disease free layings) are kept in a chawki tray of 90 cm × 120 cm to enable brushing and proper spacing for young worms later. The egg sheets are covered with a sheet of black paper or paraffin paper. On the due date of hatching and when a few larvae have started hatching, black paper and the paraffin paper are removed and the eggs are exposed to dim light for about an hour. This facilitates the uniform hatching of larvae.
13.1.1 Methods of Incubation
There are two methods, i.e., constant temperature incubation and raised temperature incubation

12.1 Introduction
Mulberry silkworm is a domesticated insect which cannot live without sufficient human care. It is also sensitive to high temperature and relative humidity. Besides good feed, a temperature range of 23°C to 28°C and relative
humidity of 75-80% is ideal for silkworm. Though, there are a number of modern gadgets to regulate the temperature and relative humidity, investment on them is uneconomical. Therefore, mulberry sericulture is practiced only
in those areas where the climate is congenial and the crops schedule is so regulated to avoid seasons with extreme climate. Besides, the silkworm rearing house is constructed to provide sufficient ventilation and keep the ambiance sufficiently cool. Due to poverty, many farmers rear silkworms within their dwelling house which cannot be disinfected due to the pungent nature of the chemicals used. However, it will be ideal to have a separate rearing house or at least a separate room for rearing purpose. The present unit deals with different kinds of rearing houses required for silkworm rearing.

11.1 Grainage
Grainages are establishments where disease free and quality seeds are produced on scientific lines.
11.2 Grainage Activities
• Procurement of seed cocoons
Within the cocoon market, the government can buy the necessary number of multivoltine cocoons from the seed cocoon market. The purpose of a grainage is to produce attractive seeds. This method involves unique procedures, such as the manufacture of silkworm seeds for the market. Half of the bivoltine cocoons should also be obtained from bivoltine cocoon marketplaces to guide hybrid seeds.
• The seed cocoons are packed
Loosely in perforated packing containers or bamboo baskets in small portions and are transported all through cooler hours of the day. Initially the seed cocoons arriving on the grainages are subjected to inflexible selection. In selection only sound and uniform cocoons conforming to the characteristics of the race are selected and defective cocoons and so forth., are rejected. Strengthen detection of pebrine disease, if any before the commencement of operation of each batch enables in keeping off excellent loss to the grainages.

10.1 Disinfection
Disinfection is the destruction of disease carrying germs. Proper disinfection is one of the key factors in determining the success of sericulture and also essential in prevention and control of silkworm disease. The disease caused by virus, bacteria, fungi and protozoa are known to occur in almost all the silkworm rearing areas of the world. The disease, together with the damage caused by the pest, accounts for 20 to 25% of crop loss.
10.2 Qualities of an Ideal Disinfectant
• It should be highly effective against wide variety of microorganism and non-toxic for animals and plants.
• It should be non-injurious and non-staining to materials like fabrics, furniture or metal wares and non-offensive to odours and taste.
• It should be specific for specific microorganisms.
• It should have good surface tension. That is good wetting and penetrating properties.
• It should be stable in storage.
• It should be readily available in market and non-expensive.
• It should be easily applied under household or other practical conditions of use.

9.1 Structure of Silk Gland
The silk of silkworms is secreted by a pair of labial glands, known as silk glands. The silk glands lie ventral to the alimentary canal. In full grown larvae, these occupy most of the body cavity. The silk glands are tubular in shape with different diameters in different regions. Each gland has 3 distinct regions (Fig.9.1).
(1) Posterior Region: Blunt, highly folded tubular posterior regions of both glands remain attached to tracheal bushes of silkworm. This part secretes fibroin as fibrinogen which converted to fibroin upon extrusion.
(2) Middle Region: Most prominent and widest part of silk gland. It remains folded in a W-shaped structure and thus has 3 limbs posterior, middle and anterior limbs. The posterior arm secretes sericin-I. It gets
surrounded by sericin-II secreted from the middle limb. This sericin again gets surrounded by sericin- III secreted from the anterior limb. The middle region of silk gland also acts as the reservoir of fibroin where the
later gets mature during the storage period.
(3) Anterior Region: The thin anterior region of silk gland has no secretory role and only transports the assembled silk to the spinneret.

8.1 Life Cycle
As in the case of a typical Lepidopteran insect, the silkworm passes through four distinct stages, i.e., egg, larva, pupa and adult during its life cycle, the duration of which may last for six to eight weeks depending upon racial characteristics and climatic conditions. Multivoltine races found in tropical areas have the shortest life cycle with the egg, larval, pupal and adult stages lasting for 9-12 days, 20-24 days, 10-12 days and 3-6 days respectively. (Fig.8.1)
In uni/bivoltine races, the egg period of the activated egg may last for 11-14 days, the larval period 24-28 days, the pupal period 12-15 days and the adult stage 6-10 days. In nature the univoltine races produce only one generation during the spring, and the second generation egg goes through a period of rest or hibernation till the next spring. In the case of the bivoltine races, however, the second generation egg does not hibernate and hatches within 11-12 days and produces the second generation normally during summer. But it is the third generation egg which undergoes hibernation and hatches only the next spring, thus producing only two generations in a year (bivoltine). In multivoltine races, the life cycle is the shortest because of the warmer ecological conditions where they are reared, and so they may yield as many as seven to eight generations in a year in tropical sericultural areas such as India, Thailand, etc. Silkworm rearing is, therefore, continuous in tropical areas whereas in sub-tropical and temperate zones it is mostly seasonal lasting from spring to early autumn.

7.1 Introduction
The three factors used to categorise silkworm races are: (1) origin, (2) voltinism and (3) moulting. In addition, they are categorised according to their shape and colour. For more than 2,000 years, people have tamed and raised the silkworm Bombyx mori. It is a monophagous insect that exclusively consumes the leaves of mulberries. As a result, mulberry silk is typically meant when the word “silk” is used.
7.2 Classification Based on the Place of Origin
(a) Indian Races: Native to South East Asia and India; these races are indigenous. They have a longer larval stage and can withstand high humidity and temperatures. The larvae and cocoon are modest in size. The cocoon is often spindle-shaped and coloured in shades of green, yellow, or golden yellow. With a lower shell percentage, the cocoon shell is thin and most of them are multivoltine.
(b) Japanese Races: Japan’s indigenous races comprise this group. The larvae are strong. The cocoon resembles a peanut. The majority of cocoons are white, while some are yellow in hue. There are more double cocoons in the ratio. The silk strand is thick and short and of poor quality and are bivoltine or univoltine.

6.1 Introduction
India’s mulberry plants, which are vital to sericulture, are susceptible to a range of pests and diseases that can harm them and reduce their productivity. The Leaf Roller, Mealy Bug, Whitefly, and Stem Borer are important pests that harm leaves and stems and lower plant yield. Plant degradation and leaf discolouration are caused by common diseases such as Powdery Mildew, Leaf Spot, Root Rot, and Bacterial Blight. To preserve healthy mulberry harvests and continue to produce silk, effective management requires the application of Integrated Pest Management (IPM) techniques, which include biological, chemical, and cultural approaches.
Mulberry is also prone to a number of illnesses brought on by bacteria, mycoplasma toxins, and fungi. It is simple for a perennial agricultural plant to become vulnerable to different diseases. Similar to this, pest insects have a
plenty of food available to them all year round to aid in reproduction. Therefore, developing high-yielding types through plant breeding programs is just as vital as preserving mulberries from disease and insect attacks. The diseases listed below are accompanied with control methods. Adopting appropriate management techniques will help prevent pests and diseases while producing high-quality and productive mulberry leaf.

5.1 Pruning
One of the most crucial aspects of mulberry farming is pruning. It involves methodically cutting off some branches in order to give the mulberry plants a manageable size and form as well as to encourage the bud to sprout and develop new branches. The primary goal of pruning is to increase leaf output and quality. In addition, it is used to harvest the shoots for silkworm rearing and to do various inter-cultivation tasks including weeding, ploughing, applying manure and fertilizer and proper timing of the rearing of silkworms. To prune without breaking the bark or stem, use a sharp secateur, pruning saw or sickle. The plants in rainfed environments are only ever trimmed once a year, at a height of 10–20 cm above the ground level in June or July when the monsoon season begins. After that the plants are let to grow into bushes with many branches till the next year. Leaf harvesting is limited to the leaf picking method.
a) Pruning Types: Pruning is categorized according to the height of the stem at which it is cut. Bottom pruning is the practice of cutting the main stem at ground level after each harvest so as not to allow a stump to emerge. When low-cut pruning is used, the main stump of the plant is developed by cutting it 10 to 30 centimetres above the ground. At around 60 and 100 centimetres above the ground, medium and high cut pruning is performed respectively.

4.1 Introduction
The yield of the mulberry crop is a significant component in determining productivity and consequently, profitability in sericulture. The two most crucial goals—increasing cocoon output per hectare and lowering production costs—will be achieved through optimizing mulberry leaf yield per unit area. Therefore, ensuring that he receives the highest leaf yield possible from his mulberry crop ought to be the main goal of every sericulturist. Furthermore,
it should be understood that every action made to increase leaf production also serves to enhance leaf quality, so securing insurance against losses to the cocoon crop later on in the silkworm raising process.
4.2 Soil and Climate
Except for extremely steep terrain, mulberry may be grown practically on any type of terrain. However, when it is grown on either level ground or gently sloping or undulating terrain, good growths are obtained. More sloping or steep terrain calls for careful consideration of appropriate soil conservation techniques including bench teracing, contour planting and contour drainage. Although mulberry thrives in a variety of soil types, loamy to clayey loamsoils are ideal for growth. Mulberry plants can withstand somewhat acidic soil conditions. However, if the pH of the soil is too low, lime or dolomite should be applied as a necessary corrective measure. When it comes to
alkaline soil Gypsum application in the soil is the best option for adjusting the soil’s alkalinity. Given that mulberries have deep roots, the soil should be sufficiently deep—up to two feet, at the very least. Mulberries grow well up to an elevation of around 4,000 feet after which their growth will be slowed by the lower temperatures. 

Non-mulberry plants, sometimes referred to as Vanya plants, are important to the sericulture sector because they give silkworms—which are normally fed mulberry leaves—an alternate source of nutrition. Many species, including castor (Ricinus communis), oak (Quercus spp.) and arjun (Terminalia arjuna), are among these non-mulberry plants. These plants are a food source for a distinct species of silkworm known as Eri, Tasar and Muga silk, which are distinct from the common mulberry silkworm, Bombyx mori. These silks are prized for their unique properties, hues and textures which add to the variety and depth of silk goods on the market.
3.2 Host Plants
3.2.1 Host Plants for Tasar Silkworms
The traditional tasar and the oak tasar are now two separate entities within the Indian tasar culture. Terminalia and Shorea dominate the traditional tasar tract, with Quercus oaks (as the name suggests) dominating the latter.
Although tasar silkworms are actually polyphagous, there is some specificity in terms of their affinity for a given feeding source.
Taxonomy: A. mylitta feeds primarily on Asan (Terminalia tomentosa,
Fig.3.1), Arjun (Terminalia arjuna, Fig.3.2) and Sal (Shorea robusta, Fig.3.3), while A. proylei is mainly reared on Uyung (Quercus serrata, Fig. 3.4), Banj (Quercus incana, Fig. 3.5), Sahi (Quercus dealbata, Fig. 3.6) and Moru
(Quercus himalayana, Fig. 3.7). Being important for tasar industry, these three genera (Terminalia, Shorea and Quercus) the silkworm feeds on Phutuka (Melastoma, Fig. 3.8) and Bogori (Zizyphus jujuba, Fig. 3.9).

2.1 Introduction
Growing as a perennial tree or shrub, the genus Morus (Mulberry) is employed in sericulture and is the only food source for the tamed silkworm Bombyx mori L. It is also a valuable commercial plant. The mulberry attracts silkworms because it contains elements that cause biting and swallowing. People who live in Karnataka, Andhra Pradesh, the northeastern states and other parts of India rely heavily on sericulture, which grows exclusively mulberries and their variants for the purpose of raising silkworms.
2.2 Mulberry Plant
Mulberry is a plant that belongs to the kingdom Plantae, order Rosales, family Moraceae and genus Morus. It grows quickly when young but eventually slows down and rarely reaches a height of 33 to 50 feet. The leaves are alternately arranged, simple often lobed and typically lobed on juvenile shoots rather than on mature trees. The plant can be monoecious or dioecious depending on the species. It produces multiple fruits that are 2-3 cm long and mature fruits that are white or green to pale yellow with pink edges. In most species, the fruits are red when ripened, turning dark purple to black and possessing a sweet flavour.

1.1 Introduction
Sericulture involves raising silkworms to produce silk. It is an agricultural industry that includes growing food plants for silkworms, raising them to produce cocoons, and then processing the cocoons to create yarn for weaving, resulting in value-added benefits.
1.2 Definition of Sericulture
Sericulture (also known as ‘silk production’) involves breeding and caring for silk worms to produce silk on a large scale. This process includes raising the worms on mulberry plants, harvesting and processing their cocoons to extract raw silk fibres, and ultimately creating commercial silk products. The art of silk production is called sericulture that comprises cultivation of mulberry, silkworm rearing and post-cocoon activities leading to production of silk yarn (FAO). While there are many species of silk worms, only a few are commonly used for commercial purposes.
1.3 Silkworm
The silkworm is the larval stage of the domesticated silk moth Bombyx mori, which is in latin also referred to as the “silkworm of the mulberry tree”. Being the main source of silk, it is a significant insect from an economic standpoint. White mulberry leaves are the primary meal of silkworms (monophagous). The generation of domestic silk moths is largely dependent on humans due to millennia of selective breeding. Because wild silk moths
have not undergone selective breeding like their domestic cousins, they are not economically viable to produce silk.

Dairy animals are the backbone of animal husbandry. India is the largest milk producer and ranks first in the world with a share of 25% of global milk production. Haemoprotozoan diseases pose significant limitations to the health and production of cattle. It leads to significant losses in the livestock industry worldwide. However, most protozoan parasites in the blood are known tocause anaemia by inducing erythro-phagocytosis. In terms of  mortality, reduced milk production and reduced immunity power, hemoprotozoan parasites pose a major threat to the livestock population. Theileria, Babesia, Anaplasma and Trypanosoma are the most important hemoprotozoan diseases of veterinary importance. These diseases affect different livestock species, caused by different species of Trypanosoma, Theileria, Babesia and Anaplasma. Tick-borne hemoprotozoan infections have a significant negative impact on the health and productivity of cattle and result in major losses to the global livestock industry. In tropical and subtropical regions, tick-borne hemoprotozoan infections have a significant impact on animal production. In India, these hemoprotozoan parasites have long posed a serious threat to the survival of exotic and crossbred cattle (Ananda et al., 2009). Haemoprotozoan diseases have deleterious impact on health and production of animals causing death in acute cases, production losses in chronically affected animals which decrease economic share of livestock sector (Bharti et al., 2022)

There are number of internal and external factors that affect the production performance of animals, among which parasites and parasitism are major of concern constraints to animal’s productivity especially in tropical countries. Feed intake and nutrient requirements have been recognized for long time as an important parameter for determining the efficiency of animal production. Most of the parasitic infection in domestic animals is caused by gastrointestinal nematode, which may result in depression in appetite, impairment in GI functions, alteration in protein, energy and mineral metabolism and changes in water balance. Nutrition can affect the ability of the host to cope with the consequences of parasitism and to contain and eventually to overcome parasitism. Since it is proposed that the host gives priority to the reversal of the pathophysiological consequences of parasitism over other body functions, it is to be expected that improved nutrition will always lead to improved resilience. On the other hand, it is proposed that the function of growth, pregnancy and lactation are prioritized over the expression of immunity. Improved nutrition may affect the degree of expression of immunity during these phases and can thus influence the resilience and resistance of host to parasite infection.

Livestock has been essential for Indian agriculture since prehistoric times. Livestock is crucial for tripling farmers’ revenue, for bovines—particularly cattle and buffaloes—play a crucial role in the economy. India has the
largest number of livestock owners, with a wide variety of livestock and poultry breeds that are essential to the socioeconomic advancement of rural communities. The production of consumables and maintaining the country’s food security are inextricably related to the livestock and agricultural sectors. Numerous illnesses have a detrimental effect on the health and productivity of livestock and are highly significant economically. Livestock illnesses have negative effects on producers, costing them money in upkeep, resources, and production.
Protozoal infections are a major contributor to the global burden of infectious diseases and have a profound effect on health, society, and the economy. Nearly one-sixth of the world’s population is at risk of dying from serious diseases like malaria (Plasmodium spp.), African sleeping sickness (Trypanosoma brucei), Chagas’ disease (Trypanosoma cruzi) and various forms of cutaneous and visceral leishmaniasis (Leishmania spp.). Although the burden of protozoal diseases primarily affects tropical and subtropical regions, environmental changes and ecological modifications brought about by both natural and manmade factors have had and are likely to continue to have a significant impact on the emergence and spread of these infections in high-income nations.

Haemoprotozoan parasites are responsible for causing severe infections in humans as well as animals across the world. The important hemoprotozoan diseases of livestock are trypanosomosis, theileriosis, babesiosis, and
anaplasmosis, which are caused by several species of Trypanosoma, Theileria, Babesia, and Anaplasma, respectively, in several species of livestock. These diseases caused huge impact on health and productivity of livestock as well as human beings and causes great economic losses to the livestock production n terms of morbidity and mortality worldwide. In India, the annual economic loss has been esteemed in the livestock due to theileriosis, babesiosis and trypanosomosis of Rs 8426 crore, Rs 4000 crore and Rs 4474 core, respectively. The major clinical signs of the haemoprotozoan disease varies from fever, anorexia, anaemia, abortion, and even death in the acute form of infections. The symptomatological treatment is a quite common practice in the field condition to treat the animals suspected with haemoprotozon infection leading to the development of resistance in animals to currently available drugs against haemoprotozoans. The accurate and prompt diagnosis of haemoprotozoan infection is a key to control these diseases. Routine diagnosis of haemoprotozoan infection has been rely on clinical findings and microscopical demonstration of the infective parasitic stages in the blood or tissue fluid smear. Conventional diagnostic techniques such as Microscopical examination techniques and Immunological assay provide the definite clues about parasitic infections in general, but these tests have some limitations.

The reclassification of the order Rickettsiales was predicated upon comprehensive genetic analyses of 16S rRNA, groESL, and surface protein genes. Consequently, organisms within this order were systematically assigned to one of two families: Anaplasmataceae and Rickettsiaceae. Within the Anaplasmataceae family, phylogenetic analyses consistently delineated four genetically distinct clades: (1) Anaplasma, (2) Ehrlichia, (3) Wolbachia, and (4) Neorickettsia. Despite the obligate intracellular nature of rickettsial organisms in both families, those classified under Rickettsiaceae proliferate freely within
the host cell cytoplasm, whereas members of the Anaplasmataceae family are confined exclusively to membrane-bound vacuoles within the cytoplasm of host cells.
The first documented cases of anaplasmosis trace back to the late 19th century in South Africa. However, it wasn’t until 1910 that the causative agent of the disease was conclusively identified morphologically as “marginal points” within red blood cells by Max Theiler, later named it Anaplasma marginale. A year later, he identified another species, A. centrale, which caused a milder form of the disease in cattle. During the 1930s, Sanborn, Stiles, and Moc demonstrated the mechanical transmission of A. marginale by horse flies and stable flies. In the late 1980s, the life cycle of A. marginale was fully elucidated in ticks belonging to the genus Dermacentor.

Bovine babesiosis is a significant febrile disease, primarily affecting cattle and buffalo, transmitted by ticks. The disease is marked by the rapid proliferation of parasites within the bloodstream, leading to the extensive destruction of red blood cells. This results in a cascade of clinical symptoms, including anemia, jaundice, hemoglobinuria, and splenomegaly, with the potential for severe cases to culminate in death. The acute form of bovine babesiosis is particularly severe, often characterized by these pronounced symptoms, which can lead to rapid deterioration in the affected animals. Babesiosis is not merely an acute illness but can also persist as a chronic infection. Chronic bovine babesiosis is typified by ongoing anemia and varying degrees of weight loss, reflecting the enduring impact of the parasite within the host. Economically, this disease poses a formidable challenge, especially in regions where cattle are most susceptible. Since the first description of Babesia bovis by Victor Babes in Romania in 1888, numerous distinct species have been identified, each contributing to the global burden of this disease (Hunfeld et al., 2008). The impact of bovine babesiosis on livestock improvement efforts in endemic regions is profound. The introduction of susceptible, naive animals into these areas often leads to significant losses, as these animals are highly vulnerable to the disease.

Theileriosis is a tick-borne protozoan disease that affects a wide range of domestic and wild animals, particularly cattle. While multiple species of Theileria exist, Theileria parva and Theileria annulata are the most important pathogens in terms of their impact on domestic cattle. This disease is transmitted by ixodid ticks and has a significant impact on cattle populations in tropical and subtropical regions. Theileriosis poses a substantial threat to livestock productivity, affecting economic stability in many countries, especially those that rely heavily on agriculture and cattle farming.
The disease has two primary forms: East Coast fever (ECF), caused by T. parva, which predominantly affects cattle in eastern, central, and southern Africa; and tropical theileriosis, caused by T. annulata, which affects cattle across northern Africa, the Middle East, and parts of Asia. Both diseases are highly pathogenic and, if left untreated, can lead to high morbidity and mortality rates, significantly impacting livestock production.

Kingdom: Protozoa
Phylum: Euglenozoa
Class: Kinetoplasta
Order: Trypanosomatida
Family: Trypanosomatidae
Genus: Trypanosoma
Members of the genus Trypanosoma are responsible for trypanosomosis in animals and human beings and are found in the blood vascular system and tissues all over the world. All the species of trypanosomes are transmitted biologically or mechanically through an arthropod vector except T. equiperdum, which is transmitted through coitus in equines.

Protozoa are considered as unicellular eukaryotic organisms and evolved after bacteria and thousands years early to multi-cellular organisms as well as animals. This unicellular eukaryotic organism contains all the organelles or structures like multi-cellular organisms but in single cells. Similar to multicellular, the genetic information of protozoa is also stored in chromosomes. The protozoa differ from bacteria in different manners. The differentiating features of bacteria and protozoa are given in Table 1.
1. General Structures of Protozoa
Protozoa, like other eukaryotic cells, contain a nucleus, endoplasmic reticulum, mitochondria, Golgi apparatus, and lysosomes. Beyond these common organelles, protozoa feature a range of unique structures with specific functions that enable them to operate independently. Protozoan cells can be categorized into two primary components: the cytoplasm and the nucleus.

It is a systematic method to solving problems through an examination of policy approaches.
It involves evaluating public policies, including their development, implementation and impacts, to determine their effectiveness in achieving desired outcomes. The process includes identifying relevant issues, assessing potential solutions, weighing the costs and benefits and recommending the most appropriate course of action.
Use of Policy Analysis in Decision-Making
Policy analysis combines qualitative and quantitative methods to assess policies’ implications on economic, social and political factors. It often includes stakeholder analysis, forecasting future scenarios and evaluating policy impacts using tools like cost-benefit analysis, risk assessment and statistical modeling

Agricultural extension services are critical for the dissemination of knowledge, technologies and innovations among farmers, leading to improved agricultural productivity, sustainability and livelihoods. Different countries have adopted varied approaches to extension policies, reflecting their unique socioeconomic, political and agro-ecological contexts. Here’s an overview of
extension policies in different regions:
1. United States: In the United States, the Cooperative Extension Service, established under the Smith-Lever Act of 1914, is a nationwide, publicly funded network that connects land-grant universities with local communities. It provides educational programs, resources and advisory services to farmers, ranchers and rural residents. The U.S. model emphasizes partnerships between federal, state and local governments, as well as with the private sector, to deliver extension services.
2. India: India has a diverse and decentralized extension system comprising public, private and Non-Governmental Organizations (NGOs). The National Mission on Agricultural Extension and Technology (NMAET) is the central government’s flagship program that focuses on agricultural extension, including farmer capacity building, technology disseminationand knowledge management. Despite this, challenges such as inadequate funding, limited reach and poor coordination across agencies persist, leading to calls for reform and more innovative approaches like Information and Communication Technology (ICT) integration.

Policy research plays a critical role in influencing policy change by generating robust evidence that can guide decision-making processes. The use of evidence is crucial in ensuring that policies are both effective and appropriate to address specific issues. Evidence-based policy-making relies on credible, relevant and timely research that helps identify problems, evaluate potential solutions and
forecast the impacts of various policy options.
Role of Policy Research in Generating Evidence
1. Identification of issues: Policy research begins with identifying key issues or challenges that require policy intervention. This involves conducting systematic research to understand the scope, scale and
nature of the problem. For example, research on gender disparities in agricultural labor in India may highlight specific barriers women face, such as lack of access to resources or discriminatory practices.
2. Data collection and analysis: Gathering quantitative and qualitative data is essential for building a comprehensive understanding of the issue. For instance, data collection may involve surveys, interviews,
case studies and secondary data analysis to capture diverse perspectives and experiences. This data provides a solid foundation for analyzing the problem’s root causes and identifying the affected population.

The policy development process is a structured approach to creating policies that address specific issues or achieve particular goals. It involves several steps, from identifying the problem to implementing and evaluating the policy
Steps of Policy Development Process
1. Problem identification
• Definition: The process of recognizing and defining an issue that requires government intervention.
• Key actors
• Public: Citizens, interest groups and communities often raise awareness about problems.
• Media: Plays a critical role in highlighting issues and shaping public opinion.
• Policymakers: Government officials, legislators and public administrators who prioritize issues.
• Experts and academics: Provide data, research and analysis that help frame problems.

Definition of advocacy, approaches to policy advocacy-advising, media campaigning, lobbying, Activism, Information Education Communication (IEC) and Behavior Change Communication (BCC), Advocacy for Rural Advisory Services (RAS), Policy advocacy strategy
Introduction
The word “Advocacy” is defined as any action that promotes, urges, justifies defends, or pleads on behalf of another person is referred to as advocacy. In all its manifestations, advocacy works to make sure that people, especially those who are most sure people, especially those who are most at risk in a group or society can:
• Have their opinions taken into account when decisions about their lives are being made
• Speak up for matters that are important to them.
• Defend and protect their rights
• Have their voice heard on key subjects.

Importance of Policies for Extension
Policies play an important role in the field of extension, which involves the transfer of knowledge and technology from researcher to farmers, communities and other stakeholders. Following are some specific reasons why policies are vital for extension:
1. Accountability: Policies may provide basis for monitoring and evaluation of extension activities and for holding extension professionals and other stakeholders accountable for their actions.
2. Innovation: Policies can promote innovation in extension by encouraging the adoption of new technology, approaches and practices, encouraging experimentation, collaboration and continuous improvement. By removing barriers to adoption and offering rewards for testing, policies can also aid in the creation of an atmosphere that fosters innovation.
3. Consistency: Policies aid in ensuring that extension activities are consistent with the goals and objectives of organization or program. It offers a framework for decision-making that enables the uniform
handling of similar circumstances.

Introduction
Environmental Impact Assessment (EIA) is a process of evaluating the likely environmental impacts of a proposed project or development, taking into account inter-related socio-economic, cultural and human-health impacts, both beneficial and adverse.
UNEP defines Environmental Impact Assessment (EIA) as a tool used to identify the environmental, social and economic impacts of a project prior to decision-making. It aims to predict environmental impacts at an early stage in project planning and design, find ways and means to reduce adverse impacts, shape projects to suit the local environment and present the predictions and
options to decision-makers.
Environment Impact Assessment in India is statutorily backed by the Environment Protection Act, 1986 which contains various provisions on EIA methodology and process.
Evolution & History of EIA
EIA is termed as one of the best policy innovations in the 1900s. The main aim of EIA is to conserve the environment and bring out the best combination of economic and environmental costs and benefits. Read the below-mentioned points to understand the Environmental Impact Assessment evolution and history:
• The birth of EIA is dated back to the 1970s.

Impact assessment approaches
Impact assessment approaches can be classified into four broad categories i.e. quantitative, qualitative, participatory and mixed methods.
i. Quantitative impact assessment approaches
• It focuses on assessing the degree and extent of the impacts quantitatively.
• Some degree of quantification may be necessary in all impact assessments, in order to evaluate the success of the Intervention and the extent of any adverse effects.
• Largely depends on micro-economic approaches following econometric models
• Involving baseline studies: The precise identification of baseline conditions, definition of objectives, target setting, rigorous performance evaluation and outcome measurement
• Costly and limited scope: Limited in the types of impacts which can be accurately measured and may pose difficulties for inference of cause and effect.

Indicators for impact assessment
Meaning and concept of Indicator
The term indicator is often used interchangeably with data, targets, standards for evaluation, and even various modes of data collection, which undoubtedly inhibits a productive dialog on the subject. Such confusion is unwarranted, since the term has a precise connotation- in the literature on monitoring and evaluation of development. Simply stated, indicators are variables designed to measure change in a given phenomenon or process. They are analytical tools which facilitate the measurement of change and provide summary data for project design, implementation, and evaluation. Indicators are defined as
“specific (explicit) and objectively verifiable measures of changes or results produced by an activity or intervention” (United Nations: 1985; p. 37). A few observations about indicators can be useful in further clarifying their nature. First, as the above definition implies, indicators provide quantitative data which can be analyzed using statistical techniques to produce estimates of a phenomenon. In cases when only qualitative information is gathered, it should be converted into numerical data for the purposes of analysis and presentation. Second, an indicator can capture one or more dimensions of a phenomenon or process depending upon the purpose of the study. We can, for example, construct an indicator for urbanization based on a wide range of variables such as number of school, higher educational institution, road connectivity, number of financial institution, health infrastructure, income etc. On the other hand, one can use each of the above items as a distinct indicator. Indicators focusing on different dimensions of a subject are difficult and more costly to construct. Third, several indicators can be used to capture the same phenomenon.

Introduction
Impact Assessment (IA) is a systematic process used to evaluate the potential or actual effects of a project, policy, or program on society, the economy, and the environment. It helps decision-makers understand the implications of their actions and ensures that interventions achieve their intended outcomes while minimizing negative consequences.
Meaning of Impact Assessment
Impact Assessment is a structured method of determining the significance of an action or intervention in various sectors. It involves analyzing both the intended and unintended effects of policies, projects, or programs. IA provides insights into the sustainability, feasibility, and effectiveness of an initiative before or after its implementation. By assessing social, economic, and environmental impacts, IA helps stakeholders make informed decisions.
Concept of Impact Assessment
The concept of IA is rooted in sustainable development and evidencebased policy making. It is used in multiple fields, including environmental management, social development, economic planning, and corporate governance. The key principles of IA include:"
i. Comprehensiveness: Evaluating a wide range of impacts, including social, economic, and environmental factors.
ii. Transparency: Ensuring that the assessment process is open and inclusive.

Introduction to LFA – Background and description
The Logical Framework Approach (LFA) is a methodology mainly used for designing, monitoring, and evaluating international development projects. Variations of this tool are known as Goal Oriented Project Planning (GOPP) or Objectives Oriented Project Planning (OOPP). The logical framework Approach is a method to develop the project’s goals and activities and identify key information (such as risks) through a participatory approach. Basically, this means that instead of having a single person who designs the project all on his own, you seek the involvement of all concerned parties – also known as the stakeholders. The most important stakeholders are the potential beneficiaries of the project, or the target group.Getting the involvement of your target group and other stakeholders not only ensures that your project is well designed. It also makes sure that everybody is aware of the project and what it is supposed to change. It allows people to get involved, and develop a feeling of responsibility for the project and its results.This is known as developing ownership for the project’s outcomes, and it is important to make sure that the positive realizations of the project are embedded locally and durable over time. People will care about the project and take care about its results.

An important decision that the management has to take during implementation of the process of evaluation is about which model to choose. The choice of a single model will mainly depend on the nature of the problem or the situation in an organization. However an integrative approach using more than one model may also be used. Before implementation of any of these models and before the actual process of evaluation starts it is important to make suitable preparations and create a conducive environment in the organization for successful conductance of the evaluation. The following points are to be taken
in to consideration before and at the time an evaluation is carried out in an organization:

Networks – Introduction, origin and widely used networks
Network is a technique used for planning and scheduling of large projects in the fields of construction, maintenance, fabrication, purchasing, computer system instantiation, research and development planning etc. There is multitude of operations research situations that can be modelled and solved as network. Some recent surveys reports that as much as 70% of the real-world mathematical programming problems can be represented by network related models. Network analysis is known by many names PERT (Programme Evaluation and Review Technique), CPM (Critical Path Method), PEP (Programme Evaluation Procedure), LCES (Least Cost Estimating and Scheduling), SCANS (Scheduling and Control by Automated Network System), etc.
It is a graphical representation of logical and sequentially connected activities and events of a project. Network is also called arrow diagram. PERT (Programme Evolution Review Technique) and (Critical Path Method) are the two most widely applied techniques.

SWOT Analysis – Concept, origin and evolution
While working on a research project at the Stanford University sometime around 1960s to 1970s, Albert Humphrey developed an analytical tool to evaluate the strategic plans and find out why corporate planning failed. He coined this technique as SOFT analysis where –
• S stood for what things are Satisfactory at present,
• O denoted what Opportunities can be explored in the future,
• F meant the Faults in the present and
• T signified the Threats that could surface in the future.
While the majority agrees that SOFT is the predecessor of SWOT, some people believe that the concept of SWOT analysis emerged separately and has nothing to do with SOFT.
How SWOT evolved from SOFT?
The first mention of the term SWOT can be traced back to the Long Range Planning seminar held in Zurich in 1964. In this seminar Urick and Orr proposed the concept of SWOT analysis which was derived from SOFT by replacing the F for faults with W for Weaknesses. With its initial promotion in the Britain, the concept soon gained recognition among strategic planners and management consultants the world over. The new interpretation of SWOT, the way it is used these days, differs slightly from that of SOFT.

Ten Steps in programme evaluation
i. Identify and describe programme you want to evaluate: The first step of the evaluation process is to identify the object or programme of evaluation. For this purpose, a short written description of the object or programme to be evaluated must be drafted. This description must be formulated in a way that is also comprehensible to outsiders. Relevant items to be included in this description are, for example, the name of the object or programme of evaluation, the expert responsible for it, the employees taking part in it, the goals, scientific references, the contents or topics, the elements, methods, scope, available resources, key figures, past developments, etc.
ii. Identify the phase of the programme
• Design
• Start-up
• Ongoing
• Wrap-up
• Follow-up

Evaluation theories refer to the conceptual frameworks, models, and principles that guide the systematic assessment and analysis of programs, policies, interventions, and other social phenomena. They provide a set of organizing principles and methodologies for evaluating the effectiveness, efficiency, relevance, and sustainability of various interventions and initiatives in different domains, including education, healthcare, social services, environmental protection, and public policy. Evaluation theories draw from various disciplines, such as psychology, sociology, economics, statistics, and management, and they may emphasize different aspects of the evaluation process, such as the role of stakeholders, the criteria for success, the methods for data collection and analysis, and the use of evaluation results.
i. Programme theory
Program theory defines as the mechanisms that mediate between the delivery (and receipt) of the program and the emergence of the outcomes of interest. Programme theory, variously referred to as programme theory, programme logic, theory-based evaluation or theory of change, theory-driven evaluation, theory-of-action, intervention logic, impact pathway analysis, and programme theory-driven evaluation science refers to a variety of ways of developing a causal modal linking programme inputs and activities to a chain of intended or observed outcomes, and then using this model to guide the
evaluation. The term ‘logic model’ is used to refer to the summarized theory of how the intervention works (usually in diagrammatic form) and ‘programme theory evaluation’ is used for the process of developing a logic model and using this in some way in an evaluation. Most approaches to building logic models have focused on simple, linear models, but some have explored how non-linear models might be used to better represent programmes and guide their evaluation. In particular, a number of evaluators have incorporated concepts of complexity in their discussion and use of logic models. 

Concept of Evaluation: Meaning and concept in different contexts
The term “evaluation” originates from the Latin word “Valupure,” which signifies the value attributed to a particular entity, concept, or action. Evaluation is a systematic process that involves the periodic comparison of actual outcomes and impacts against those initially planned or anticipated. It is designed to assess the overall worth of an endeavor, thereby facilitating learning and improvements for future initiatives. This process encompasses the structured and objective assessment of an ongoing or completed project, program, or policy, including its design, execution, and results. The primary objective of
evaluation is to determine the relevance, achievement of objectives, efficiency, effectiveness, impact, and sustainability of a given intervention. Through this approach, evaluation seeks to provide credible and useful information that supports informed decision-making for stakeholders, including beneficiaries and donors. By integrating lessons learned from past experiences, evaluation enhances the strategic planning and implementation of future projects, ensuring continuous improvement and better resource utilization. Evaluation is an essential tool in both public and private sectors, allowing organizations to measure their performance against predefined benchmarks. It serves as a crucial mechanism for accountability, ensuring that resources are utilized effectively to achieve intended goals. Moreover, evaluation fosters transparency by offering objective insights into the successes and shortcomings of initiatives, thereby reinforcing stakeholder trust and engagement. There are several types of evaluation, each serving a distinct purpose.

Abstract
The global shrimp market has experienced steady growth, driven by rising consumer demand and advancements in aquaculture. Valued at US$ 69.0 billion in 2023, the market is projected to reach US$ 100.2 billion by 2032, with a CAGR of 4.1%. Shrimp farming, a major contributor to this growth, offers economic benefits such as foreign exchange earnings, job creation, and increased land value. However, the sector faces significant environmental and socio-economic challenges. These include mangrove deforestation, groundwater depletion, water pollution, and socio-economic disruptions such as land salinity and reduced local employment. Addressing these issues through sustainable practices and inclusive policies is essential for balancing economic gains with environmental and community well-being. Shrimp farming’s future lies in adopting eco-friendly technologies and equitable strategies that ensure long-term viability.
Keywords: Shrimp farming, aquaculture, environmental impact, socio-economic challenges, sustainability.

Abstract
Ornamental fisheries, known as aquariculture, represent a flourishing industry that cultivates and trades vibrant fish species for aesthetic pleasure. Originating from the earliest public aquariums in Europe, this sector has grown into a global market exceeding US$15 billion annually, with significant contributions from developing countries. West Bengal, particularly Kolkata, emerges as a pivotal hub within India, generating 90% of the state’s ornamental fish revenue, primarily driven by local communities across suburban areas. This chapter explores the landscape of ornamental fisheries in Kolkata, detailing its economic significance with insights into market dynamics, from collection to export. Despite its economic contributions, the sector faces market informality, technical deficiencies in breeding practices, and occasional regulatory setbacks impacting sales. For instance, regulatory changes in 2017 temporarily disrupted market stability, highlighting vulnerabilities within the industry. Looking ahead, the chapter discusses strategic pathways for growth and sustainability. Government initiatives, including financial support and technological advancements under schemes like the Pradhan Mantri Matsya Sampada Yojana, offer promising avenues for enhancing production capabilities and market integration. Moreover, stakeholder collaborative efforts to streamline distribution and pricing could bolster profitability and market resilience. In conclusion, while ornamental fisheries in Kolkata confront multifaceted challenges, proactive government interventions and industry collaboration are crucial to unlocking its full potential. The sector can foster sustainable growth by addressing existing barriers and leveraging emerging opportunities, enriching local livelihoods and global aquariculture enthusiasts.
Keywords: Aquariculture, Ornamental Fisheries, Kolkata, Status

Abstract
Infectious diseases pose significant threats to global aquaculture, causing substantial economic losses exacerbated by intensive farming practices. RNA viruses, including birnavirus, nodavirus, rhabdovirus, and others, infect both wild and cultured fish, leading to severe mortalities. This study focused on detecting two RNA viruses, Infectious Hematopoietic Necrosis Virus (IHNV) and Spring Viremia of Carp Virus (SVCV), using the TRIZOL reagent method. Fish samples, including Tilapia, Mrigal, Catla, and Minor carp, were observed for clinical symptoms and dissected to collect organs like kidney and spleen. RNA extraction was performed using TRIZOL, followed by cDNA synthesis and PCR amplification targeting specific viral genes. Gel electrophoresis confirmed the absence of IHNV and SVCV in all samples tested. This comprehensive methodology ensures efficient surveillance and early detection of viral infections in aquaculture, thereby enhancing disease management strategies and economic sustainability. The findings indicate a current absence of IHNV and SVCV in the studied fish populations, emphasizing the importance of ongoing monitoring to safeguard aquatic health.
Keywords: (RNA Viruses, Trizol reagent method, Viral detection)

Abstract
The aquafeed industry is a cornerstone of modern aquaculture, providing essential nutrients to support the growth, health, and productivity of farmed aquatic species. This chapter provides a thorough overview of the industry, focusing on its evolution, current trends, challenges, and future directions. The formulation of aquafeeds has progressed from simple raw ingredients to sophisticated, nutritionally balanced diets tailored to meet the specific requirements of diverse species at different life stages. Critical components, including proteins, lipids, carbohydrates, vitamins, and minerals, are discussed in the context of their roles in promoting optimal growth and physiological functions. The importance of optimum ratio of the digestible protein: digestible energy (DP:DE) is also explained in the section along with the nutritional requirement of commercially important Indian major carps (IMC), Chinese major carp (CMC), trout, catfishes and crustaceans.
Keywords: Aquafeed, Plant-based protein, Feed formulation, Precision feeding, and Protein utilization

Abstract
Ocean acidification, caused by rising atmospheric CO2, is a major environmental issue that threatens marine ecosystems and human livelihoods. This process decreases the pH of seawater, increasing its acidity, through a series of chemical reactions that result in the formation of carbonic acid. These changes negatively impact marine food webs, especially calcifying organisms like corals, molluscs, and plankton, which depend on carbonate ions to build their shells and skeletons. The cascading impacts of acidification jeopardize the biodiversity, productivity, and resilience of marine ecosystems, including fisheries that millions depend on for food and income. Factors such as ocean warming, deforestation, and natural CO2 emissions exacerbate acidification. Mitigation efforts, including reducing CO2 emissions, restoring habitats, and promoting sustainable fishery management, are essential for minimizing future impacts. Addressing and mitigating ocean acidification are critical for conserving marine life, sustaining fisheries, and preserving ecological balance in the face of global climate change.
Keywords: Ocean acidification, Marine food webs, Impact, Calcifying organisms