eChapters

Heart failure is not a disease but it is the end stage of heart diseases. Heart failure in horses is not very common as in dogs and cats. In horses it is characterized by the signs of forward failure, backward failure and fall in blood pressure.

Heart diseases in feline are silent killer as cats are able to hide their symptoms in early stage. Cats are brought to clinics only when disease is more advanced. Heart diseases are different from heart failure. Heart failure is the end stage of heart diseases.

The ferret is a domestic species of small mustelid. Congestive heart failure is most common form of heart disease seen in aged ferrets. Heart failure in ferrets is due to heart diseases and clinical presentation varies from no clinical signs in initial stage to many signs of fulminant heart failure.

With an increase in domestication of rabbits, a leporine, as pet in urban dwellings and their increased life span, risk of cardiac diseases has also increased. Heart diseases are being diagnosed in rabbits with an increasing frequency. The development of clinical signs of heart failure is gradual in rabbits causing late recognition of the heart disease.

Heart failure is a common progressive and complex clinical syndrome with high morbidity and mortality in humans. It is mostly due to cardiac involvement. Clinical signs and symptoms developed in heart failure cases are the manifestations of body’s compensatory efforts to meet chronic inadequate cardiac output as seen in other species of animals also.

Heart failure is the end stage of cardiac diseases. It occurs in pet birds when cardiac output is insufficient and unable to maintain arterial blood pressure. In birds right side heart failure is more common as compared to left heart failure.

Heart failure is the terminal outcome of heart diseases. It is defined as ventricular dysfunction (pump failure) leading to cardiac inability to maintain an adequate cardiac output. Heart failure is the outcome of filling defect, cardiac muscle abnormality, conduction defect, an excessive work load or a combination of these abnormalities.

Cardiomyopathies in acts can be classified broadly as Hypertrophic cardiomyopathy and non-hypertrophic cardiomyopathies. Usually, no alarming clinical signs are detected during routine examination in the preclinical stage except cardiac murmurs in some cats with HCM. This is because, that the cats are sedentary and excellent in hiding the signs of illness from the pet parents. Hence the onset is often acute with the sudden appearance of the clinical signs linked to congestive heart failure like severe dyspnoea, cardiogenic shock, aortic thromboembolism, arrhythmias and even syncope and death

Cats with CHF will be presented with severe dyspnoea, due to fulminant pulmonary oedema and or pleural effusion. The pleural effusion associated with CHF is usually a modified transudate, some cases it may be chylous .In echocardiography ,the size of the left atrium should be determined .If the LA size is normal ,then the dyspnoea may not be of cardiac origin .The presence of B-lines in the lung area in association with LA enlargement confirms cardiogenic pulmonary oedema. Stress, anaesthesia, I/V fluids and steroids leads to decompensation and fulminant pulmonary oedema. Thoracocentesis is will be helpful if there is dyspnoea due to significant pleural effusion. At least 300ml of effusion can be usually removed. The dyspnoeic cat is very fragile and should be handled carefully. Butorphanol may be given for anxiolytic effect. Oxygen administration is beneficial. Furosemide when given intravenously has an initial venodilator effect and should be repeated as required monitoring the sleeping respiratory rate (SRR). Addition of nitro-glycerine (vasodilator) reduces preload, decreases left atrial pressure and help in reducing pulmonary oedema. If the clinical signs are suggestive of cardiogenic shock or myocardial failure, Pimobendan I/V or Dobutamine CRI should be considered.

The heart, composed primarily of specialized muscle tissue known as cardiac muscle, is responsible for maintaining the circulatory system’s function by pumping blood throughout the body. The unique characteristics of heart muscle allow it to respond dynamically to various physiological demands. Among these adaptive responses, hypertrophy, atrophy, and the process of pacemaking are fundamental to heart function and health. Understanding these processes is crucial for comprehending how the heart responds to different stressors, such as physical activity, disease, or aging, and how its electrical and mechanical functions are integrated.
Nature of cardiac muscle
Cardiac muscle is a specialized type of muscle tissue found only in the heart. It is unique because it combines features of both skeletal and smooth muscle, providing both strength and rhythm in its contractions. Cardiac muscle fibres are striated and connected by intercalated discs, which allow rapid transmission of electrical impulses between cells, ensuring synchronized contraction. Unlike skeletal muscle, cardiac muscle has a relatively high density of mitochondria, providing the energy necessary for continuous activity.

The heart is a muscular structure that contracts in a rhythmic pattern to pump blood. The heart functions as a pump to provide a continuous circulation of blood throughout the body.The blood vessels that take blood from the heart to the various tissues are called arteries.Arterioles open into a network of capillaries which constitute the microcirculation. Circulation of blood in the body is important for the transport of nutrients to all parts of the body and for the transport of gases and waste products. The primary function of the heart is to transfer sufficient blood from the venous system to the arterial side of the circulation under sufficient pressure to maintain the circulatory needs of the body.

Heat desiccated products represent khoa and khoa-based sweets, rabri, basundi, etc. These are important traditional dairy products. Traditional dairy products and a great assortment of sweets is an integral part of Indian heritage. These products are endowed with enormous value and enjoy tremendous mass appeal. Of great social, religious, cultural and economic importance these products have been developed over a long period of culinary skills and carry with them, the age-old wisdom and experience. Traditional dairy products have always played a pivotal role in preservation of precious milk nutrients and promotion of its consumption among masses. The increased availability of milk during the flush season coupled with lack of facilities to keep liquid milk fresh during transit from rural production areas to urban market has led to the conversion of milk into variety of traditional products. In addition to preservation of milk solids for longer duration, manufacture of traditional dairy products adds value to milk and also provides tremendous employment opportunity. It is estimated that about 50% of milk produced in India is converted into a variety of traditional products.

Traditional dairy products represent the most prolific segment of Indian dairy industry. These products not only have an established market in India but also have a great export potential because of strong presence of Indian diaspora in many parts of the world. In view of the growing awareness towards the safety aspects of milk-based sweets in India, the consumer shall prefer to buy these products from the organized sector. Despite the widespread popularity and acceptability of traditional milk products in the Indian market, the organized sector has so far not been able to tap into this market potential for many reasons such as lack of published literature on their technology, inadequacy of appropriate technologies for their commercial exploitation, inadequacy of appropriate packaging materials and labeling to take care of new pattern in consumer demand, low keeping quality and a lack of quality assurance systems.

Abstract

The objective of this chapter is to provide an overview of heat pump dryer (HPD) and recent developments in its applications for drying of agricultural and food products. The basics of heat pump dryer, classification, operating principle, configuration and control system have been presented for better understanding. Many researchers have concluded that HPDs use energy more efficiently than electrical dryers. The heat pump dryer is best suited for drying high value commodities such as fruits, vegetables, spices, condiments, herbs, medicinal and aromatic plants at near ambient temperature for producing better quality dehydrated product.

Introduction

Stress represents the reaction of body to stimuli that disturb normal physiological equilibrium or homeostasis, often with detrimental effects (Khansari et al., 1990). Domestic animals undergo various kinds of stress such as physical, nutritional, chemical, psychological and thermal stress (Marai et al., 2007; Nardone et al., 2010). Figure 1 summarises the different types of stressors and their effects on animals.

Introduction

A huge increase in the demand of animal production is expected in the next decades. Food and water security will be one of the other priorities for humankind in the 21st century. Over the same period the World will experience a change in the global climate that will cause shifts in local climate that will impact on local and global agriculture (Nardone et al. 2010). Global climate change is expected to alter temperature, precipitation, atmospheric carbon dioxide levels and water availability in ways that will affect the productivity of crop and livestock systems (Hatfield et al. 2008). For livestock systems, climate change could affect the costs and returns of production by altering the thermal environment of animals thereby affecting animal health, reproduction, and the efficiency by which livestock convert feed into retained products (especially meat and milk).

Stress is described as the cumulative detrimental effect of a variety of factors on the health and performance of living beings (Rosales, 1994). Heat stress arises when there is an imbalance between heat production within the body and its dissipation. Homeotherms can maintain their body temperature within a relatively narrow range and both physiological and behavioural responses help in thermoregulation. Stress occurs when an animal suddenly faces a change in its environment. Heat stress during summer and post summer months in tropical countries is a problem of great concern among farmers and livestock producers as it costs both production and reproduction of animals.

Rearing poultry industrially is a necessity in the present condition where the demand is high and the land holdings for extensive rearing is diminishing. All over the world the poultry industry is growing rapidly. The poultry industry in India is growing at around 8 per cent per annum. The poultry population of the country mainly consists of chicken, ducks, quails, ornamental birds and ratites. Chicken form is the major component of the industry. They are mainly reared as broilers for meat purpose and as layers for eggs. The climatic variations and their effects on profitable poultry rearing are an important topic of study in the current situation, where intensive rearing and global warming are being discussed with equal importance. The welfare aspects of the birds are also a matter of concern all over the world. Thus the knowledge of normal physiology of poultry, the effects of the tropical climate on them and the measures to alleviate detrimental effects produced by adverse climatic conditions have been discussed in detail here.

5.1. INTRODUCTION

Temperature is the one of the most important environmental element influencing the plant growth and development limiting the productivity and adaptation of crops, especially when it coincides with critical ranges (Chen et al., 1982; Paulsen, 1994). Nearly all commercial crops in the arid and semi-arid tropics often suffer from heat stress. Every plant has an optimal temperature for its normal growth, deviation from this may cause stress to plants. The adverse effects on plant of temperatures higher than the optimal considered as heat stress. Crops are exposed to periods of heat stress during their life-cycle. The optimum temperature for the most species ranges from 25 to 35 0C. Above this value, a decline in the photosynthesis rate is observed (Berry and Bjorkman, 1980; Pimentel, 1998). Even brief periods of heat-shock between temperature ranges of 45-50 0C induce marked change in plant growth processes.

3.1 Introduction

The subject of heat transfer is firmly grounded in the sciences of thermodynamics and fluid mechanics. It has become exceedingly important for engineers to possess a clear understanding of the principles of heat transfer and its application to a large number of problems. In view of process engineering, the knowledge of heat transfer and its application is most important, because heat transfer is one of the basic unit operations in the agricultural processing activities. The design of process equipments, refrigerators, boilers or type of heat exchangers, thermal treatment of food grains, cooling of perishables, pasteurizations, sterilizations, freezing of milk and fruit juices and a large number of similar applications involve consideration of heat transfer rates. There may be other situations where heat is being generated during a certain operation, and may be detrimental to the equipment and the food product. In such cases we are often faced with the task of removing the undesirable amount of heat as far as possible.

Q. 1 Psychrometric chart is a graphical representation of which properties
of air
(A) Chemical        (B) Aerodynamic
(C) Hygroscopic   (D) Thermodynamic