eChapters

Introduction

Ammonia, nitrite and nitrate are considerable in the water quality management because they can be produced a toxic depending to their form and concentration. The solubilities of nitrogen contain in water at different temperatures and pressures. Nitrogen is a basic growth substance and an important element in aquatic ecosystems as well as in the pond water. It exists variously forms in water and manly classified in organic and inorganic.

INTRODUCTION

Several biophysical factors govern the agricultural productivity of a region. Among the key biophysical factors, weather and more particularly rainfall has the over riding impact on agricultural productivity since rainfall is a primary source of water and the first requirement for raising any crop. This element influences various dynamics of crop growth and development and accounts from nearly two thirds of variation in agricultural productivity. The amount of rainfall at a particular place is important; an equal important factor is its temporal distribution, which is uneven, uncertain and erratic in most part of the country. Breaks in monsoon are common phenomenon during the monsoon period. The analysis of rainfall characteristics such as occurrence and distribution of dry or wet spell is essentially required for successful crop planning, development of befitting agro techniques, recommendation of suitable crop variety, designing of water harvesting ponds, earthen dams and other soil conservation structures. It is also an established fact that the crop development will be affected if the dry spell coincides with sensitive phonological stage of the crop and sometimes beneficial if it coincides with the ripening stage. Hence for the purpose of crop planning and to carry out the agricultural practices, it is important to know the sequence of dry and wet periods. An attempt has been made in this paper to analyse the rainfall in standard meteorological week as well as monthly basis at different probability levels for Lembucherra by using computer based forecasting technique.

1 Analysis of Chemical Composition of Milk

 1.1 Determination of Acidity of Milk

 Introduction

The acidity of milk can be determined by titrating the milk against standard sodium hydroxide solution using an indicator like phenolphthalein and is expressed in the terms of lactic acid. Though natural acidity in milk is due to its constituents such as casein, albumin, citrates, phosphates and carbon dioxide but it is customary to express in terms of lactic acid. As one gram equivalent weight of an alkali neutralizes one gram equivalent weight of an acid, the volume of standard alkali required to neutralize lactic acid of fixed volume of milk gives percent acidity of milk according to the reaction.

Abstract
The assistance/credit provided by banks is classified as priority sector lending and non-priority sector lending. Priority Sector Lending (PSL) is one which has got the order of preference over other sectors by the target groups in availing bank credit as per the directives of RBI. It is one of the important steps taken by the government for the cause of rural development. It involves rising the socio-economic status of the rural population on sustainable  basis through the optimum utilization of local resources. In the words of Planning Commission1 rural development could be achieved through strategies, policies and programs  for the development of rural areas and the promotion of activities carried out in such spheres as agriculture, forestry, fishing, rural crafts and industries, the building up of social and economic infrastructure, with the ultimate aim of achieving a fuller utilization of available physical and human resources and earns higher income and better living conditions for the population. According to Desai2, the preamble to the Bank Nationalization Act, 1970 clearly lays down that the banking system has to function in alignment with priorities and objectives. According to Srinivasan3  during 1969-89, the PSL has considerably increased and radical transformation has taken place in the allocation of pattern of credit. The trend analysis in between 1969-89 indicated that banking system has achieved a good blend of social and commercial banking.

Introduction

In recent past vegetable cultivation took enormous turn over because of increased population, inflow of tourists and increased per capita income in the Bay Islands as well as India. Population in these islands is increasing due to immigration of people from main land and the land area is limited.

Where Y is the average yield of a crop in a sequence over a period of years “n” and S is the standard deviation of yield over a period of years, Y max is the maximum yield of a crop in a certain year.

Example 1. Six crop sequences were evaluated in simple randomized block design replicated four times at Durgapura. The sequences tried are pearl millet-wheat, cluster bean-wheat, pearl milletmustard, cluster beanbarley, cowpea-mustard and pearl millet-Chickpea under irrigated conditions.

Introduction

India has shaped its economic growth and transformed through information technology and digitalisation/ The Digital India initiative has tremendously improved its economic development. India’s efforts to revolutionize its information technology have taken the road ahead among the developed countries/ The contribution in the digital payment system has shifted in the banking and financial services sector. The emergence of technology upgradation through the internet has gained momentum in shifting towards internet and mobile banking technologies. The advent of technology has revolutionized the banking system through the evolution of financial technology with sustainable technological architecture through artificial intelligence which has enhanced ease of access for customers in the banking and financial sector. Artificial intelligence revolutionized various industries especially in the banking sector which has enhanced the way for interact the customers. The AI technology helps in reducing the cost for the Financial Sector. The Banks are welcoming the new age technology to serve betterment of the modern banking services.

True/False

Q.1.    According to Prof. RA Fisher “ANOVA” is the separation of variance assignable to one group of causes from the variance assignable to other group of causes.
Q.2.    The basic purpose of ANOVA technique is to test the equality (homogeneity) of several population means from the same 
experiment.

11.1 Introduction

The analysis of variance is a powerful statistical tool for tests of significance.  The test of significance based on t-distribution is an adequate procedure only for testing the significance of the difference between two sample means. In a situation when we have three or more samples to consider at a time an alternative procedure is needed for testing the hypothesis that all the samples are drawn from the same population, i.e., they have the same mean. For example five fertilizers are applied of four plots each of wheat and yield of wheat on each of the plot is given we may be interested in finding out whether the effect of these fertilizers on the yields is significantly different or in other words, whether the samples have come from the same normal population. The answer to this problem is provided by the technique of analysis of variance. Thus basic purpose of the analysis of variance is to test the homogeneity of several means.

Analysis of Variance (ANOVA) is an important statistical technique for separating variation attributable to different sources in an experiment. The chapter explains how total variation can be partitioned into controlled and uncontrolled components and how experimental error is used to assess treatment differences. The F-test provides the basis for testing the homogeneity of several treatment means simultaneously. The chapter discusses the assumptions underlying ANOVA, including independence, normality, additivity, and homogeneity of variance. It also introduces fixed- and random-effects models and explains their relevance to experimental analysis. Forestry and agricultural examples demonstrate the application of ANOVA for interpreting treatment and experimental effects.

The effectiveness of community mobilization efforts depends significantly on the quality of analysis and understanding that guides strategic planning and decision-making processes, requiring sophisticated tools and frameworks that can capture the complexity of community circumstances while providing actionable insights for collective action. The integration of systematic analysis tools with deep understanding of value systems creates powerful foundations for community mobilization that can navigate both technical challenges and cultural dynamics that influence success and sustainability of development initiatives. Analysis tools provide structured approaches to understanding community conditions, opportunities, and constraints while helping communities develop strategic perspectives that can inform effective action planning and resource allocation decisions. These tools transform complex information into accessible formats that can facilitate community dialogue and consensus-building while building local capacity

What is AHP

Analytic Hierarchy Process (AHP) is a decision-making methodology that helps individuals and groups systematically analyze and prioritize complex decisions.

Developed by Thomas L. Saaty (1987), AHP breaks down a decision problem into a hierarchical structure and uses pairwise comparisons to assess the relative importance of different criteria and alternatives.

Introduction
Liposomal formulations constitute a distinctive category of nanomedicine platforms, showcasing potential applications in pharmaceuticals, nutraceuticals, and cosmetics (Salave et al., 2024). Since their discovery, liposomes have attracted considerable interest because of their biocompatibility, ability to encapsulate both hydrophilic and hydrophobic drugs, and potential to improve drug bioavailability while minimizing toxicity (Bangham, 1992; Dhayalan et al., 2024). The pharmaceutical industry is rapidly recognizing liposomes as effective drug delivery vehicles capable of changing pharmacokinetics, targeting particular tissues, and managing drug release. The unique properties of these vesicles, mainly made up of phospholipids and cholesterol, have created new opportunities for developing drugs that present difficult therapeutic indices (Wang et al., 2023). Nonetheless, the intricate architecture and functional diversity require comprehensive and advanced analytical evaluation, essential for maintaining quality, efficacy, and stability during the formulation’s lifecycle (Fan et al., 2021 a). The swift progress in liposomal drug development has resulted in a heightened need for strong analytical techniques. Establishing reliable, reproducible, and precise analytical methods is a crucial step in the formulation and commercialization of liposomal drugs (Khan et al., 2024). These methods must consider not only the physical and chemical stability but also the entrapment efficiency, particle size distribution, surface charge, and drug release kinetics, along with other essential characteristics. Considering that liposomal formulations consist of multiple components that interact dynamically, a thorough analytical approach is crucial. The complexity of ensuring quality and performance in liposomal products arises from the diverse physicochemical characteristics of liposomes, which can be affected by formulation composition, the encapsulated drug, and external environmental factors (Giordani et al., 2023).
The primary focus of liposomal characterization is the assessment of particle size and size distribution, as these factors have a direct impact on pharmacokinetics, biodistribution, and cellular uptake. Dynamic Light Scattering (DLS) and nanoparticle tracking analysis (NTA) are widely used methods for assessing liposome size and distribution, offering important information regarding batch-to-batch consistency and formulation stability (Nadkarni et al., 2024). Furthermore, the size of the particles influences their circulation duration in living organisms, as smaller vesicles typically attain extended circulation and enhanced tissue infiltration. A key parameter, zeta potential, or surface charge, offers insights into the electrostatic stability of liposomal suspensions, which is essential for predicting aggregation behavior and shelf-life (Biscaia-Caleiras et al., 2024; Paramshetti et al., 2024).
Encapsulation efficiency is a crucial metric for therapeutic effectiveness, indicating the ratio of the drug contained within the liposome to the overall quantity utilized in the formulation. This aspect is essential, particularly for powerful medications where precise dosing is required. Measuring encapsulation efficiency typically requires the use of separation methods such as ultracentrifugation,

Practice to calculate the weight / volume of reagents required to prepare the following standard solutions.

Preparation of Standard Solution - (1 M, 0.1 M, 1 N, 0.1 N, 0.5 N, 5%, 10%, 20%, 10 ppm, 20 ppm, 100 ppm)

Analytical chemistry is a branch of chemistry dealing with the determination of constituents of a substance or mixture of substances.

1.1 Qualitative Analysis

Qualitative analysis deals with the identification of the constituents of a substance, mixture of substances, or solutions and the way in which component element or a group of elements are constituted.

1.2 Quantitative Analysis

Quantitative analysis is concerned with the determination of quantitative contents of individual element or group of elements or compound present in the substances. This branch of analytical chemistry is of enormous scope and importance in science, industry and agriculture. The quantitative analysis can be divided into several categories based on the different methods employed for their quantitative measurements such as:

5.1 Volumetric Techniques or Titrimetric Analysis

Acid Base Neutralization Reactions-Acidimetry & Alkalimetry

Oxidation –Reduction Reactions-Oxidometry (Permanganometry) & Dichrometry

Manychemicalreactions innature,particularlyinlivingsystems,occur inaqueous solutions. Reactions are often carried out in the laboratory in aqueoussolution becausethese aregenerallymore rapid in solutionthanwhen puresolid reactions are mixed. Analysisof substancesmaybe qualitative or quantitative in nature. A quantitative analysisis one inwhich the amountor concentrationof a particular species in a sample is determined accurately and precisely.

1.1 Volumetric Analysis

Volumetric analysis is a quantitative analysis. It involves the measurement of the volume of a known solution required to bring about the completion of the reaction witha measuredvolume of the unknown solution.

The reaction used in volumetric analysis must fulfil the followingconditions;

Atomic weight of an element is defined as the relative average weight of its atom as compared to the weight of an atom of C12 (stable isotope) taken as 12 on the a.m.u. (atomic mass unit) scale.

Analytical methods development and validation play important roles in the discovery, development, and manufacture of pharmaceuticals.

Pharmaceutical products formulated with more than one drug, typically referred to as combination products, are intended to meet previously unmet patients need by combining the therapeutic effects of two or more drugs in one product. These combination products can present daunting challenges to the analytical chemist responsible for the development and validation of analytical methods. This presentation will discuss the development and validation of analytical method (Spectrophotometric, High performance liquid chromatography (HPLC), & High performance thin layer chromatography (HPTLC)) for drug products containing more than one active ingredient. The official test methods that result from these processes are used by quality control laboratories to ensure the identity, purity, potency, and performance of drug products.

In chemistry, and especially in biochemistry, a fatty acid is a carboxylic acid with a long aliphatic tail (chain), which is either saturated or unsaturated. Most naturally occurring fatty acids have a chain of an even number of carbon atoms, from 4 to 28. Fatty acids are usually derived from triglycerides or phospholipids. When they are not attached to other molecules, they are known as “free” fatty acids. Fatty acids are important sources of fuel because, when metabolized, they yield large quantities of ATP. Many cell types can use either glucose or fatty acids for this purpose.

Statistics is a branch of science which deals with the collection, classification, description and interpretation of data obtained by conducting surveys and experiments. The essential purpose of it is to describe and draw valid inferences about numerical properties of populations” (Ferguson 1966). The experience in statistics application indicates that a single statistical method can be used in different research areas for dealing with different types of problems. Various possibilities which application of a statistical method provides in certain research areas should be considered as an adequate way of dealing with a problem of the research. However, it should be noted that statistics is not a method by which it is possible to solve all the problems in a research. Nachmias and Nachmias (2009) stated that there are basically two types of statistics which include descriptive and inferential statistics. Descriptive statistics enable the researcher to summarize and organize data in an effective and meaningful way. It involves the use of tables, charts, graphs, mean, modes, median, standard scores and correlation to treat collected data. Inferential statistics is concerned with making inferences from a unit of a population. Inferential statistics is concerned with making inferences from a unit of a population. Inferential statistics allow the researcher to make decisions or inferences by interpreting data patterns. Researchers use inferential statistics to determine whether an expected pattern designated by the theory and hypotheses is actually found in the observations. To decide whether this hypothesis is true, researchers might survey the respondents and then use descriptive statistics to make comparison between these groups and would employ inferential statistics to determine whether the differences between the groups are significant or not.

1. Introduction

The chemical composition of a food is of utmost importance from many standpoints, including nutrition, safety, and stability to microbiological, chemical or physical changes. Analysis of these food components is required to provide nutrition labelling for informing the health-conscious consumer, for quality assurance during processing and storage, and for regulatory purposes. The methodology used in analysis will depend on the particular component and the nature of product being analyzed, the purpose of the analysis, and the availability of resources. The emphasis of this chapter is on understanding the principles, procedures and calculations involved in estimating a particular component in fruits, vegetables and their products.

1. Introduction
Pharmacognosy, formerly known as materia medica, is the study of unrefined medications derived from minerals, plants, and animals. Although C. A. Seydler coined the phrase in 1815, J. A. Schmidt used it in 1811 to refer to the study of medicinal plants and their characteristics. The word refers to the study or knowledge of medicines and is derived from the Latin terms gignoso, which means “to acquire knowledge of,” and pharmakon, which means “a drug.” Plants, animals, or their parts that have just been dried, sliced longitudinally or transversely, or infrequently peeled after collecting are considered crude pharmaceuticals. The majority of the basic drugs used in medicine are derived from plants, with only a minor portion coming from the animal and mineral kingdoms. Drugs made from plants are full plants, however cinchona bark, ginger rhizome, nux vomica seeds, and senna leaves and pods are plant components. Some medications, such as orange and lemon peels and colchicum corm, are used fresh, but the majority are dried after harvesting. Crude pharmaceuticals can also be obtained by straightforward physical processes like drying or water extraction. Aloe is the dried juice of Aloe species’ leaves, opium is the dried latex from poppy capsules, and black catechu is the dried aqueous extract from Acacia catechu’s wood. Plant exudates such as gums, resins, balsams, volatile oils, and fixed oils are also considered crude medicines. Additional drugs that physicians, surgeons, or pharmacists use directly or indirectly include diatomite for filtering gums or turbid liquids; cotton, silk, jute, and nylon for surgical dressings or kaolin; wax, gelatin, and agar for use as pharmaceutical auxiliaries of flavoring or sweetening agents; and drugs used as insecticides or vehicles. Animal medications can be extracts, like liver extracts, glandular products, such thyroid organs, or whole animals, like can-tharides. Similarly, goods that come from animals include fish liver oils, bee wax, musk, certain hormones, enzymes, and antitoxins. Drugs can be classified as either organized or disorganized. Organized medications come directly from plants and are composed of biological tissues. Unorganized pharmaceuticals are generated by physical intermediary procedures such as cutting, drying, or extraction with water, and although being derived from plants, they do not contain cellular tissue. Thus, unstructured medications include gums, resins, aloe, catechu, opium, and other plant exudates. Kaolin, chalk, diatomite, and other Ayurvedic bhasmas are examples of mineralbased medicines.

Methods and procedures for the qualitative characterization and quantitative analysis of different constituents of soil organic matter are presented in this Chapter.

20.1. Moisture

The soil sample should be in an air-dry condition after mixing, sieving and grinding. When stored in a moisture-tight container, the free H₂O content should not vary appreciably during storage. While most determinations can be done on air-dry samples, for certain purposes such as obtaining summation values, a moisture content value is required.

Introduction 
Inclusive education means including all children in the same classrooms, in the same schools. It means real learning opportunities for groups who have traditionally been excluded – not only children with disabilities, but speakers of minority languages too. The school and classroom operate on the premise that students with disabilities are as fundamentally competent as students without disabilities. Therefore, all students can be full participants in their classrooms, in the local school community and in the societies they live in. Much of the movement is related to legislation that students receive their education in the least restrictive environment (LRE). This means they are with their peers without disabilities to the maximum degree possible, with general education the placement of first choice for all students (Alquraini & Gut, 2012). Inclusive education in India has evolved significantly over time. Initially, education for children with disabilities was largely segregated, with specialized institutions being the primary option. The shift towards inclusion began gaining momentum in the late 20th century, influenced by global movements and national policies. Key milestones include the 1992 National Policy on Education, which emphasized inclusive practices, and the 2009 Right to Education Act, which mandated free and compulsory education for all children, including those with disabilities. Recent initiatives have focused on improving accessibility, teacher training and integrating students with diverse needs into mainstream classrooms, reflecting a growing commitment to equitable educational opportunities for all. Contemporary inclusive education in India is characterized by a growing commitment to integrating students with diverse needs into mainstream schools, supported by various policies and initiatives. The 2016 Rights of Persons with Disabilities Act and the 2020 National Education Policy underscore the importance of inclusive practices, advocating for accessible infrastructure, specialized training for educators, and individualized support for students. Despite these advancements, challenges remain, including inadequate resources, a shortage of trained teachers, and varying levels of implementation across different regions. Efforts are ongoing to address these issues, aiming to create an educational environment where all students, regardless of their abilities, have the opportunity to succeed and thrive. The emerging importance of an inclusive education system in India reflects a growing recognition of diversity and equality in the educational landscape. This shift is driven by the realization that inclusive education not only promotes social justice but also enhances academic and social outcomes for all students. As India progresses towards a more inclusive society, there is increasing emphasis on

Analyzing feeds for nutrient content is essential for proper balancing of livestock rations. This is especially essential for those feeds that have undergone the fermentation process. Silage samples should be analysed for dry matter, protein fractions (degradable and undegradable protein, soluble protein, and heat damaged protein), ADF, NDF, mineral content and energy. In addition to these components, lactic, acetic, and butyric and propionic acids, pH, ammonia nitrogen, ethanol, and yeast and mold counts are also quantified.

Fertility of a soil can be assessed by analyzing various available nutrients present in the soil. Fertilizer recommendations for various crops and cropping sequences can be made on the basis of fertility status of a soil. Besides this, problematic soil can be ameliorated on the basis of soil test values. Among the various steps of soil testing programmes, soil sampling is the most vital step.

The safety of the food supply suitably remains a high main concern for industry stakeholders, regulatory agencies and patrons. With the surfacing of new safety challenges and issues, companies are establishing and upgrading programs to reduce risk factors. These programs are constantly monitored for reliability, repeatability, reproducibility and effectiveness. Due to the health and safety risks posed by chemical, microbiological and environmental contaminants, analytical methods are progressively more becoming a pride and joy of food safety programs. Innovative analytical approaches are being developed in response to budding food safety issues. To monitor for known issues only the established and officially approved methods are used often. Oftentimes, new analytical methods are developed, improved or modified quickly in response to issues, such as melamine contamination, which are unforeseen. In such instances, accurate data derived from sound, validated analytical methods are required to facilitate industry stakeholders and regulators to make sound methodical decisions.

Through research, industry has improved a host of analytical methods in recent years, resulting in higher sensitivity and accuracy for difficult-to-detect contaminants, detection of contaminants in new matrix classes for grades. These advances have been made in the face of changing set of laws, more painstaking method-validation standards and end user demands for safe, quality products. Further to this, this spirit of innovation will continue to be fundamental in industry’s efforts to ensure the safety of the comprehensive food chain.

Bacteria from the genus Anaplasma belong to the Procaryota kingdom, the family Anaplasmataceae. Anaplasma belong to obligate intracellular microorganisms, Gram-negative bacteria, living in the blood cells of mammals. Vertebrates can be their reservoir, i.e. an environment where the pathogen can live and proliferate for many years. However, in many cases bacteria from the genus Anaplasma cause diseases in domestic animals and people.
Taxonomical Position of Bacteria from the Genus Anaplasma
The genera Anaplasma, Ehrlichia, Neorickettsia and Wolbachia include obligate intracellular bacteria, parasitizing in the vacuoles of cells in eukarytic hosts. Animal pathogens were attributed to the genus Anaplasma, such as A. centrale, A. marginale, A. platys, A. ovis and A. bovis, and also the aetiological factor of human anaplasmosis, A. phagocytophilum.
Anaplasma marginale
A. marginale are obligate intracellular bacteria parasitizing in erythrocytes of higher vertebrates, mostly ruminants.
Anaplasma Centrale
A. centrale is a parasite in the erythrocytes of ruminants, mainly cattle. As opposed to A. marginale, it creates concentrations in the central part of the cell. A. centrale is less pathogenic to cattle than A. marginale but, most importantly, occasionally gives resistance against the latter. Hence it is used for the preparation of live vaccine strains, assuring immunological protection against bovine anaplasmosis.
Anaplasma Bovis
A. bovis is a bacterium detected mainly in cattle, but also observed in small mammals which are probably a reservoir of this bacterium. It occurs in monocytes, and the disease it causes is called monocytic anaplasmosis. The symptoms of the disease are most visible in calves, but also in adult animals; symptoms include weakening of the body, marked reduction in weight, elevated temperature, enlargement of prescapular lymph nodes, paling of the mucous membranes, and in many cases an elevated amount of secreted mucus.

Ring Porous

• having vessels more numerous and usually larger in cross section in the springwood with a resulting more or less distinct line between the springwood and the last season’s wood— compare diffuse-porous.

• In some species (e.g. Oak (Red Oak, White Oak) Teak and ash elm, hickory), the largest pores are in the earlywood while those in the latewood are more evenly distributed and uniform in size.

• These woods typically have distinct figures and patterns, and the uneven uptake of stain (the large pores soak up more colour) make the figure more pronounced.

• These are also known as open-grain woods

Semi-ring porous or Semi-diffuse porous

• In some species (e.g. Butternut, Black Cherry, Black Walnut, Pecan, Tanoak), pores are large in the earlywood and smaller toward the latewood, but without the distinct zoning seen in ring-porous woods.

• Also, some species that are usually ring-porous (e.g. Cottonwood) occasionally tend toward semi-ring porous.

Anatomy is the study of an internal structure of an organism, while morphology is the study of various external features of an organism Anatomy helps in knowing the structural peculiarities of different groups of plants, which help for adaptation to diverse environments. An angiosperm plant is characterized by the presence of roots, stems, leaves, flowers, and fruits

Plant cells: Plant cells are multicellular eukaryotic cells that make up a plant (a group of eukaryotes belonging to the Plantae kingdom, with the ability to synthesize their own food using water, sunlight and CO₂). Being eukaryotic cells, they have a defined nucleus with specialized structural organelles that enable it to function in an orderly manner.

(I)  Structure

The swine is an omnivorous animal because if can eat both vegelables and meat. But generally they prefer the vegetarian diet over the carnivorous diet. Pig is a simple stomach animal with double hoof. Different type of pigs are found as Sus indicus, Sus vittatus, Sus scrofa and  Suis domesticus.

            At the first instance, the skeleton of pig looks smaller than its original size. The main reason of this is feeding and nutrition of the animal. The pigs are kept indoor, provided less exercise and artificial feeding that leads to fattening of animals (pigs). The other reason for the undersized skeleton in pigs is that as compared to other animals the bone density of pig is more and they are very nicely arranged, that is why they are much stronger. The skull of the pig is triangular, long towards mouth, frontal bone is large and strong.

            The jaw has teeth, they use it for tearing and chewing of objects (feed). The temporary and permanent dental formula of pig is follows:

1. Anatomy the word derived from Latin word.

2. Study of internal structure and organization of organisms known as anatomy.

3. The macroscopic study of organisms is known as gross anatomy.

4. The study of parental developmental anatomy is known as developmental anatomy.

5. The study of tissue is known as histology.

6. The study of organization of cell and sub cellular components known as cell biology.

7. The study of nervous system is known as Neuro anatomy.

8. Bottom feeder has sub terminal or inferior mouth.

9. Sturgeon bottom feeder.

10. Grouper and lion fish has superior mouth.

11. In half beaks the lower jaw projects.

Similar to animals of the higher order, insects also possess all important internal systems of organs necessary for the proper performance of the various vital functions. The most important of the systems are the alimentary or  digestive  system,  the  circulatory  system,  the  respiratory system, the reproductive system and the excretory system. The fundamental arrangement of the various organs is more or less similar in all insects and does not exhibit much remarkable variations as seen in the external morphological features. The dorsal blood vessel or heart runs along the median line immediately below the dorsal wall. The digestive system including the alimentary canal and its appendages lie in the middle, below the heart. The nervous chain lies below the alimentary canal and immediately  above  the  ventral  wall.   The  organs  connected  with  the reproductive system are found in the posterior region of the abdominal cavity on both sides of the alimentary canal.  Though these arrangements are characteristic of all Arthropods, including insects, they are quite different in the higher animals (Fig.23)

Similar to animals of the higher order, insects also possess all important internal systems of organs necessary for the proper performance of the various vital functions. The most important of the systems are the alimentary or digestive system, the circulatory system, the respiratory system, the reproductive system and the excretory system. The fundamental arrangement of the various organs is more or less similar in all insects and does not exhibit much remarkable variations as seen in the external morphological features. The dorsal blood vessel or heart runs along the median line immediately below the dorsal wall. The digestive system including the alimentary canal and its appendages lie in the middle, below the heart. The nervous chain lies below the alimentary canal and immediately above the ventral wall.

Primary Dicot Root

A young dicot root which does not possess secondary tissues but only the primary permanent tissues (tissues derived from the apical growing point) is called primary dicot root. It is generally cylindrical in outline and possesses the following tissues.

I) Epiblema or Piliferous Layer

It is the outermost layer of the root. It is made of compactly arranged thin walled and slightly elongated parenchymatous cells. Epiblema of a root differs from the epidermis of the stem in being devoid of distinct cuticle and stomata. Some cells of the epiblema give rise to thin – walled tubular outgrowths called root hairs. In some plants the root hair mother cells are shorter in comparison to other epiblema cells. The root hairs and piliferous layer (pilus – hair, ferre to carry). The root hair and thin walled epiblema cells absorb water and mineral salts from the soil. Root hairs commonly do not live for more than one week. With their death the epiblema cells become suberised and cutinised.

II) Cortex

It lies below the epiblema. The cortex is made up of many layers of thin walled parenchyma cells. The parenchyma cells may be rounded or angular. They enclose inter-cellular spaces for diffusion of gases.The cells of the cortex store food. They also conduct water from the epiblema to the inner tissues.

In order to evaluate the correct status of the organs their correct disposition within the body becomes very essential. Although one cannot see the organs beyond the skin, but appropriate knowledge of the topography of the organs can act as a glass covered watch wherein one can see from outside the arms and the dial of the watch.

Horse

Heart: The heart is placed in the middle mediastinum of the thoracic cavity with its long axis directed caudo-ventrally. Three fifth of the heart lies on the left of median plane while two fifth is on the right of the median plane. The base is placed dorsally, with its highest point at the junction of the dorsal and middle thirds of dorso-ventral diameter of the thorax. As a whole it lies opposite to second intercostal space/third rib to sixth rib/sixth intercostal space. The apex of the heart lies in the center of the last segment of the sternum about half inch from the sternal part of the diaphragm. Heart is directly related to the lateral thoracic wall at the cardiac notches formed in the lungs. The left surface of the heart extends from third to sixth rib in the lower third of chest while the right surface extends from third to fourth intercostal space.

Primary Dicot Stem

A stem with only primary permanent tissues is called primary stem. It represents a young stem. The different tissues present in dicot stem are arranged in concentric layers. e.g. Sunflower

I) Epidermis

Epidermis is the outermost layer of the stem. It is made up of compactly arranged parenchymatous cell, which look rectangular in transverse section. The cells are transparent and devoid of chloroplasts. The outer walls are convex, thickened and cutinized. On the outer side they possess a layer of cuticle. The internal walls of the epidermal cells are thin. The radial walls are thick towards the outer side and gradually become thin towards the inner side. Pits occur in the radial walls. The epidermis of sunflower bears several unbranched multicellular hair. At place the epidermis contains minute pores called stomata or stoma. Each stomata or stoma has a pair of specialized kidney shaped cells called guard cells. The guard cells have a few chloroplasts. By their swelling, the two guard cells can form a pore between them.

Like any other organ system in the body, immune system comprises of various organs and cells. The major component of the immune system is the lymphocytes which constitute lymphoid system. The lymphoid organs are classified into two categories: primary and secondary lymphoid organs.

Primary lymphoid organs: These are the organs where B and T lymphocytes undergo maturation. Bone marrow and thymus are the primary lymphoid organs. These are the organs where lymphocytes differentiate, proliferate, get selected and mature into functional cells.

The major components of the immune system are the lymphocytes which constitute lymphoid system (Figure 2.1).The lymphoid organs are classified into two categories: primary and secondary lymphoid organs.

3.1 Introduction

Fish are the only true aquatic vertebrates. These exploit every nook and cranny of the water domain. They are notable for their vast numbers and perplexing forms. In the phylogenetic history of vertebrates, this is the first group of animals to develop biting jaws. The origin, evolution and interrelationships of fishes are not fully understood due to incomplete fossil records and a scarcity of primitive types. The early appearance of bone, cartilage and enamel-like substances was crucial in the evolution of fish.

Throughout human history, people across the globe have sought to understand and predict the ever-changing skies. From the scorching deserts of North Africa to the lush rainforests of South America, and from the snow-capped Himalayas to the vast Australian outback, ancient cultures developed unique methods to forecast the weather. These traditional knowledge systems, often passed downthrough oral traditions and  storytelling, reflected the specific environmental contexts, mythological beliefs, and spiritual practices of each community. In ancient China, royal astronomers meticulously recorded weather patterns and planetary movements to guide agricultural planning and imperial decisionmakingIn Greece, philosophers like Aristotle and Theophrastus wrote extensively on weather signs and forecasting methods. In Africa, tribal communities observed animal migrations and plant behaviors to anticipate seasonal changes. Native American tribes used lunar cycles and star constellations to predict weather patterns, while ancient Indians studied the movements of planets and nakshatras (lunar mansions) to forecast monsoon rains.

Detailed information on tectonic evolutionary history of the Bay of Bengal is presented followed by elucidation of these characteristics towards tsunamigenesis in this chapter. The Andaman-Nicobar Island Arc (ANIA) is situated on a 1000 km long plate margin and represents a key region in the developing oceanic crustal area of Bay of Bengal. Frequent earthquakes including the tsunamigenic earthquake of 26th December 2004 off the coast of Sunda take place in this region. The subduction of Indian plate under Myanmar-Thailand plate drives formation of chain of Andaman-Nicobar group of Islands. These oceanic crust formation, subduction and arc formation are all seismigenic and generate shallow focus earthquakes in the Bay of Bengal. It is also observed that the seismicity is decreasing as the bathymetry increases towards SW of the Bay of Bengal. Thus, in long term, the slow accumulation of stress as tectonic plates converge may result in many more earthquakes in this region. After a dormancy of over 100 years, the Barren Island volcano renewed its activity following recent earthquakes. The seismic activity along the Andaman-Nicobar trench is continuing with earthquakes of magnitude varying from 4.8 to 7.2 Richter scale. All these observations suggest resurgent and intense tectonic and volcanic activities due to which allied hazards such as tsunami may take place in future.

INTRODUCTION

The evolving Earth, depending on its heat flow pattern in the mantle throughout geological time, had passed through stages, which are diagnosed through characteristic geodynamic signatures. This chapter focuses on a very active region in the crust, namely, the Andaman-Nicobar Island Arc (ANIA) to recognize such signatures and decipher relative safety of surrounding regions including east coast of India. As similar active arc systems such as Sunda Arc & Japan Arc generate volcanic, seismic and tsunami hazards, understanding the ANIA would be of help assess safety of surrounding regions. Abundant geoscientific literature exists on the northern part of the Indian plate, which is undergoing compressive stress since collision between the Indian and Eurasian plates about 55-45my. However, the behavior of remaining part of the Indian plate underneath the Indian Ocean is still sparcely studied. Owing to these reasons, this chapter attempts to fill the gap in our understanding as well as to assess the implications of renewed phases of geohazard occurrences including that of catastrophic earthquake and tsunami of 26^th December 2004.

Pulses, grown on marginal and poor soils under low input management with very low yields, are the integral part of dryland farming systems and cover 12.8% of the total cropped area in Andhra Pradesh. There are no pulse based cropping systems in the state and they are only component crops of cereals or commercial based cropping systems as intercrops or catch crops in between two main crops or as sequence crops after exhaustive cereal or commercial crops raised on residual fertility and receding soil moisture. The important pulse crops grown are Chickpea, Pigeonpea (Redgram), Mung bean (Greengram) and Urd bean (Blackgram) which contribute to 97.7% of total pulse production in the state. Pigeonpea is mostly grown as intercrop under rainfed conditions with crops like sorghum, maize, castor, cotton etc. It is also grown as sole crop and at times, pigeonpea is intercropped with greengram/ blackgram.

Breeding soundness examination can be used as a diagnostic aid in herd fertility problems. After breeding soundness examination, a bull is classified as a satisfactory potential breeder, a questionable potential breeder or an unsatisfactory potential breeder. Members of the Society for Theriogenology developed the concept of a breeding soundness examination as mentioned below.

Anaesthesia is an important criterion for doing laparoscopic procedure, which is being achieved by induction of general anaesthesia. However, in certain species, e.g. bovine, caprine etc., it can be done by preanaesthetic agent and infiltration of the local anesthetic agent at the site of the trocar placement. Selection of an anesthetic agent depends on the patient conditions, nature of procedure; time to be taken for the laparoscopic procedure and available facility. For the induction of the general anaesthesia follow the same procedure as in the conventional surgery viz. fasting, water withheld, preanaesthetic, fluid administration etc. Further, due to difference in the physiology of cardiopulmonary system of different animals, all these considerations varied from species to species and breed-to-breed. For instance cattle and buffalo are more prone to regurgitation and subsequent aspiratory pneumonia in general anaesthesia than those of dog and cat. While going for induction of general anaesthesia, an anesthetist should know about the different drug being used, their mechanism of action, effect on the different body system, their adverse effect and pure antagonist, if possible. Besides this an anesthetist should also know about the patient physiology and equipment for the administration of the anesthetic agents, because veterinary anesthetist is faced with numerous disturbances of cardiopulmonary and skeletal muscle function associated with general anaesthesia. For anaesthesia no anaesthetic agent is safe until and unless it is used by an experienced anesthetist.

A sound understanding of general anesthetic emergencies and surgical techniques is vital for all practicing veterinarians. In most of the veterinary practices, after induction of anesthesia, no one is assigned the task of anesthetist to monitor anesthesia and occurrence of complications during surgery which may lead to the development of anesthetic emergencies. Onset of general anesthesia disturbs the physiological equilibrium of patient and increase the threshold of harmful events. The harmful events of anesthesia includes:

Morphological characteristics

It is a glabrous aromatic perennial or biennial herb, 1-2 meter tall. Stem is hollow. Root is thick rhizomatous. Leaves are unipinnate, bipinnate, or tripinnate, large pinna is toothed, ovate or lanceolate.

Floral characteristics

Inflorescence is compound umbel with numerous rays. Flowers are white, yellow or purple in colour, bracteate; florets white or purple. Seeds are small in size and winged. Fruits/seeds are 1.25 cm by 0.6 cm in size.

Distribution

The plant is endangered in status, which is distributed in Western Himalaya from Kashmir to Uttrakhand, in alpine scrub and forest shades between 2700-3700 meters.