eChapters

Introduction

Agroforestry denotes a sustainable land and crop management system that strives to increase yields on a continuing basis, by combining the production of woody forestry crops (including fruit and other tree crops) with arable or field crops and/or animals, simultaneously or sequentially, on the same unit of land and applying management practices that are compatible with the cultural practices of the local population. In Jammu and Kashmir, agroforestry systems have been practiced since centuries and passed from generation to generation. These systems were built on the foundation of protecting and planting trees. These systems in the past have made the hill people self- sufficient and well- nourished.

Class- Arachnida
 •Class Arachnida includes scorpions, spiders, ticks and mites.
 •Antennae, wings and compound eyes are absent.
 •Body divided into head, thorax and abdomen.
 •Mouth is small and adapted for suck blood or tissue fluids of host.
 •Most of the members have poison glands or claws for paralyzing the host before sucking.
 •The first and second pair of appendages is known as chelicerae and pedipalps, respectively.
 •The first six segments of body are termed as prosoma and rest segments as opisthosoma.

Introduction

India has a coastline of 8,118 km, with an exclusive economic zone (EEZ) of 2.02 million sq km and a continental shelf area of 3,72,424 km², spread across 9 maritime States and seven Union Territories, including the islands of Andaman and Nicobar, and Lakshadweep. India represents 2.5 percent of the world’s landmass and supports a population of over one billion people. India is also one of 17 mega-biodiverse countries in the world, with 7.8% of the recorded species of the world, including 45,500 recorded species of plants and 91,000 recorded species of animals. The marine ecosystem is extremely diverse, attributed to the geomorphologic and climatic variations along the coast. The coastal and marine habitat includes near shore, gulf waters, creeks, tidal flats, mud flats, coastal dunes, mangroves, marshes, wetlands, seaweed and sea grass beds, deltaic plains, estuaries, lagoons and coral reefs.

Importance of Study

The detailed studies on the coastal and marine biodiversity of the Indian mainland are lacking, and so these habitats and the biodiversity are represented poorly. It is obvious that the biodiversity is distributed widely among different associated habitats and conserving a single area would never support all the important species and ecological processes worth protecting. Furthermore, biodiversity can only be conserved by preventing habitat loss and by restoration. The importance of any single species in the functioning of an ecosystem may not be high, but protection of a mosaic of habitats will certainly preserve diversity among the species of conservation importance. Also, to achieve the Biodiversity Aichi Targets with reference to the marine environment are to preserve ecologically sensitive areas and maintain the health of the marine environment by protection, sustainable use and conservation of marine living resources.

Plant name         Cultivars

Amaranthus        NBRI, Lucknow: Amar Kiran, Amar Mosaic, Amar Parvarti, Amar

Tricolor                Prithu, Amar Raktabhy, Amar Suikiran, Amar Summer King, Amar

                            Summer Queen, Amar Tarang

1. Father of agronomy is -Peter Decresenzi.
2. Dr. Biwant Rajis the founder of Relay cropping.
3. The Indian Institute of Farming System Research is located at - Modipuram, Meerut, U.P.
4. Scientific study of mixed cropping was firstly done by -La-Flitze (1928).
5. Relay cropping concept was derived from -Relay race.
6. Natural Resource Management is an example of Sustainable Agriculture.
7. Cropping System is a component of -Farming System.

The 73rd and the 74th Constitutional Amendment Acts, 1992 enjoin upon the states to establish a three-tier system of Panchayats at the village, intermediate and district levels and Municipalities in the urban areas respectively. States are expected to devolve adequate powers, responsibilities and finances upon these bodies so as to enable them to prepare plans and implement schemes for economic development and social justice.

These Acts provide a basic framework of decentralisation of powers and authorities to the Panchayati Raj/Municipal bodies at different levels.

The 73^rd and the 74^th Amendments to the Constitution of India are the new chapters in the democratic decentralization process in India.

Fluids and electrolytes are critical in managing dehydration, electrolyte imbalances, and shock in animals. These life-saving interventions restore homeostasis in various disease conditions. Fluid therapy is tailored based on species, body weight, disease condition, and hydration status, ensuring proper restoration of blood volume, electrolyte balance, and acid-base homeostasis. Principles of fluid therapy
1. Types of fluids
Crystalloids: Normal saline, Ringer’s solution, and lactated Ringer’s solution (LRS). Colloids: Plasma, hydroxyethyl starches, and dextrans. Dextrose solutions: For energy supply and hypoglycemia.
2. Routes of administration:
Intravenous (IV): For severe dehydration and shock.

The arid zone eco-system of Rajasthan is very fragile and is prone to serious imbalance even with the slightest disturbance due to mismanagement of resources. Among the eastern margin of the mean annual rainfall is 500 mm, while in the western most part it is 100 mm. The rainfall is monsoon driven. It comes between June and September (in 9-21 short spells). Large coefficient of variation (40-60%) and erratic distribution during the monsoon are characteristics features of the rainfall, leading often to prolong drought and failure of rainfed crops (More and Samadia, 2007). Temperature as low as 4.4° C, and as high as 50° C has been recorded in Western Rajasthan. Farming system and cropping system approach for sustainable use of farm resources and reduced risks have been successfully demonstrated in perennial horticulture. There is great pressure of livestock on available feed and fodder, as land available for fodder production has been decreasing. The requirement of dry and green fodder by 2025 would be 1170 mt and 650 mt while supply is expected around 411.3 mt and 488 mt deficit will be 64.87 % green fodder and 24.92 % dry fodder (Table 1).

Multiple cropping includes both inter and sequential cropping systems and here the main objective is to utilize the available resources effectively in a given environment. Number of indices are available for assessing land use and the yield advantage of crop mixtures compared to pure stands. These indices not only reflect the difference in criteria used to appraise advantages often encompassing aspects of quality or values as well as yield, but also reflects the different reasons for which an assessment is made.

1. Rotational intensity (RI): Crops are grown in a recurring sequence on the same piece of land with sufficient diversity and intensity. Crop rotations to control erosion/ to improve or maintain soil fertility and to manage weeds, insects and disease. Lower values of rotational intensity indicate mono cropping and higher values of rotational intensity indicates more rotation.

The original divisions of the class insecta are a matter of dispute and it is not easy to decide which division to use many, different original order and groups are recognised by different experts and which one is best will no doubt remain problem. The words taxonomy, systematics and classification have been used alternatively for the same subject by various scientists. However Simpson 1964 has attempted to segregate these. According to him classification is the order of animals into groups on the basis of their relationship that is association of contiguity similarity or both. Systematic is the scientific study of the kinds and diversity of organism and of any and all relationships among them, while taxonomy is the theoretical study of classification including its bases, principal procedures and rule. All animal species are segregated into small and large groups on the basis of their comparative similarities and dissimilarities. The largest group is called phyllum as followed by class, order, family, genus-species and sub-species respectively. The Phylum, class, order, genus, species etc. The division of class insecta into primitive wingless insects, the apterygota and the secondary winged-insects the pterygota and included some orders. The class insecta may be divided into two subclasses.

    1.    Control points are the points in the food processing chain where it is possible to control or remove hazards.

    2.    Critical control points are the control points in the processing chain where it is essential to a hazard, usually because there is no later step at which to establish control.

    3.    Preventative measures are the actions and activities needed to remove hazards or control them by reducing them to acceptable levels.

    4.    Critical limits for critical control points are measurements such as temperature and time, that must be met, or characteristics such as appearance and texture. Critical limits need to be validated.

    5.    Monitoring is the regular measurement or observation of a critical control point to ensure it is not beyond its critical limits.

    6.    Take corrective action to bring the process back under control before the problem (‘deviation’) leads to a safety hazard. Consider proper management (disposition) of any adversely affected product.

    7.    Verification procedures are tests and programmes that make sure the HACCP system working properly

    8.    Record keeping and documentation systems must meet the needs of the business and be adequate to show that the food safety programme is working.

In this chapter we will cover all the basics libraries and some frameworks of machine learning, deep learning and computer vision. We will discuss all about their use with an example and instruction which will states the commands to install to those libraries for building any project in our system. So let’s begin

What is a Library?

Library is an aggregate of features and methods that allow you to take many actions without getting your own code written.

For instance, the libraries that you have to know are if you work with data, numpy, scipy, pandas, etc. They have very simple data processing functions that save you time for small tricks.

Pineapple i.e. Ananas comosus (L.) Mer. belongs to the Bromeliaceae family, which has around 46 genera and 1700 species, mainly cultivated in the tropical and sub- tropical regions. It is ranked third in production of tropical fruit after banana and citrus. The pineapple market has been growing extensively due to the attractive aroma compounds and nutritional values as well as huge demand and competitive retail prices (Ali et al., 2020). But, several sanitary problems have been reported in pineapple and they are considered as the main constraints for low yield of that crop in several producing areas. Significant yield losses have been caused by infestation of different pests like mealy bug, fruit borer, mites, scale insects, as well as with different nematode species (Pires de Matos, 2017). The crop lifecycle phases, soil, climatic variables and crop management practices influence the pest infestation intensity. In order to prevent severe crop losses, an integrated approach comprising prophylactic, biological, cultural, mechanical and need-based chemical steps is most appropriate for controlling pineapple pests and maintaining their population below the threshold level. This chapter deals with globally important pests of pineapple with their nature of damages and effective control measures in depth.

Introduction
Physiological disorders or dysfunctions in domestic animals are prevalent and can significantly impact the health and well-being of these animals. Understanding the fundamentals of these disorders is essential for veterinarians, animal scientists, and anyone involved in the care and management of animals. This chapter covers a diverse range of physiological disorders, including cardiovascular, respiratory, gastrointestinal, renal, endocrine, musculoskeletal, neurological, dermatological, reproductive, and ocular disorders. These conditions can manifest differently across species and breeds. This MCQ chapter serves as an introduction to the basics of physiological disorders in domestic animals and aims to test your knowledge on this important subject.

Plant diseases are classified on the basis of type of pathogenic or non-pathogenic causes of the disease. The classification is based on the plant pathogenic organisms as follows.

A. Parasites

The diseases are incited by parasites under a set of suitable environment. Association of definite pathogen is essential with each disease. They include both biotic and mesobiotic agents.

Biotic agents: They are also called as animate causes. They are living organisms.

Plant diseases are classified on the basis of type of pathogenic or non- pathogenic causes of the disease. The classification is based on the plant pathogenic organisms as follows.

PARASITES

They include both biotic and mesobiotic agents. The diseases are incited by parasites under a set of suitable environment. Association of definite pathogen is essential with each disease.

i. Biotic agents: They are also called as animate causes. They are living organisms. Biotic agents include:

INTRODUCTION

Insect pests cause variable and complex problems for potato farmers. Insect pests account for 16% of the crop losses of potato worldwide, and reductions in tuber yield and quality can be between 30% and 70% for various insect pests. India has a greatdiversity of insect pests that attack potato. Thesepests can damage potato plants by feeding on leaves, reducing the photosynthetic area and efficiencybyattacking stems, weakeningplants and inhibitingnutrient transport, and by attacking the potato tubers destined for consumption orfor use as seed. In India, approximately 60 billion rupees (US$1.2 billion)worth of potato tubersare lost annually due to pest damage, which accountsfor 10–20% of total production (Chandel et al., 2013). The potato pests are grouped into soil pests, foliage feeders, sap feeders, and storage pests. Inseed production, aphids and whiteflies are of greatest concern. In ware production, the key pests may be insects which attack tubers, such as tubermoth, whitegrubs, and cutworms. In some situations, foliage feeders suchas noctuid moths and coccinellidbeetles are also important.The Potato cyst nematode (PCN) (Globodera spp.) and root knot nematodes (RKN) (Meloidogyne spp.) are amongst the most economicallyimportant nematode pests of potato. Cyst nematodeshave amazing adaptation for long term survival in the soil, even in the absence of a suitable host whichmakesthemchallenging to the farmers, scientists and policy makers. They are subjected to stringent quarantine and/or regulatory procedures, wherever they occur and presents a serious threat to domestic and international commerce in potatoes. RKNs are prevalent all over the world and can cause significantcrop loss in both warmand cool climatic conditions, depending on their species. In this chapter, the current information on biology, ecology and management of the major potato pests is discussed in the Indiancontext.

The immediate objective of the programme was to achieve rapid increase in food grain production to meet the food grain requirement of the country. The programme was implemented in the district having potential irrigation facilities with less prone to natural hazards. Integrated and intensive approaches were adopted to solve the problems of agriculture production in the areas which were more responsive to such production effort. The programme sought to achieve rapid increase in the level of agricultural production through a concentration of financial technical, extension and administrative resources. In the long run it aimed at a self - generating break through in productivity and raising the production potential by stimulating the human and physical process of change.

IADP was a demonstrational programme which showed how to increase production more rapidly on one hand and a path finding experimental programme which facilitated the development of new innovations, new ideas and procedures for wider adoption in agriculture development.

One of the major drawbacks of IADP was its neglect of the equity aspect of the development. Even though this drawback, the spectacular results in improved production yield obtained in IADP, prompted Government to extending the benefit of the programme to other districts of the country with less cost and reduced staff strength. This resulted in launching of the Intensive Agriculture Area Programme (IAAP) in 1964.

Mole

A mole is defined as the amount of chemical substance containing exactly 6.022 140 76 × 10₂₃ numbers of constitutive particles such as atoms, ions and molecules. This number is a fundamental constant named Avogadro’s number in honor of Italian scientist Amedeo Avogadro. This constant is properly reported with an explicit unit of “per mole,” and rounded version being 6.022 × 10₂₃/mol.

This definition has been adopted since November, 2018 revising the old definition based on the number of atoms in a sample of pure ₁₂C weighing exactly 12 g. Thus, as per the definition, 1 mole of any element contains the same number of atoms as 1 mole of any other element. However, the mass of 1 mole of a particular element is different from that of another element.

Molar mass

Molar mass of an element (or compound) is the mass in grams of 1 mole of that substance, a property expressed in units of grams per mole (g/mol).