eChapters

non-herbaceous plants that are accessible for animal foraging.
Flour: It is soft, finely ground meal of a grain which mainly consists of gluten and starch.
Fodder: Fodder covers various agricultural products specifically intended for the nourishment of domesticated animals. The term “fodder” is particularly associated with the provision of food to these animals, which may include plants that are harvested and delivered to them, as opposed to the food they gather independently through foraging. Any green plant or crop meant for animal feeding for supply of nutrients and bulk.
Forage crop: A crop of cultivated vegetation or portions of plants, excluding detached grains, that is grown specifically for grazing or harvesting to serve as animal feed. Forage and roughage these two terms are used interchangeably. Forages include hay, straw, silage and pasture while roughage include rice husk, groundnut shells.
Forage crops: It denotes the wild as well as cultivated green plants used for feeding of domestic animals like cattle, buffaloes, goat, sheep, horses, etc.
Forage: Forage includes consumable plant materials, including grasses, legumes, herbs and shrubs, as well as hays and silages. These materials are either grazed or ingested by livestock to meet their nutritional needs and dietary requirements within agricultural ecosystems.
Germ: It is the embryo of any seed. eg. Wheat germ meal (25% CP and 7% EE)
Gluten: When flour is washed to remove starch, a tough, viscid nitrogenous substance remains which is known as gluten. eg. Corn gluten.
Herbage: Herbage denotes the various plants, grasses, or vegetation that are specifically designated for the nourishment of livestock. This term generally encompasses the softer, green portions of plants that are appropriate for animal grazing.

Abscission: The shedding of leaves, flowers or fruits as a result of formation of layer of loosely adhering cells at base that breaks apart readily.

Accent: It is created in the garden to avoid the monotonous view. Mostly unusual object like tall fountain, tree, statue etc are used to create the effect

Acre: A unit of measurement of land area equivalent to 4840 square yards or 0.4047 hactare.

Acropetal: Developing sequentially from basal to the apical position.

Acrylic: It is a glassy thermoplastic that is incorporated in rigid plastic to enhance wither ability.

Aestivation: The use of high temperature to promote flowering.

After-ripening: Physiological changes that take place within a dormant seed or bud during dormancy or It is a type of embryo maturation which enables germination of seeds.

There is no plant in this world which is uneconomical/not useful. Medicinal plants have been considered as important therapeutic aid for alleviating aliments of human kind. The WHO estimates that 80% of people living in developing countries rely almost exclusively on traditional medicines for their primary health care needs. Aromatic plants are used for essential oils - volatile material extracted from plants or plant parts usually by stream distillation and used in flavours and fragrances for food, soap, detergents, perfumes, lotions etc. Spices are the dry part of a plant such as roots, leaves and seeds which impart to food a certain flavour and pungent stimuli. Spices contain variable amount of fat, protein, carbohydrates, fibres, minerals and vitamins.

Vitamins and minerals play crucial roles in supporting immune function across various animal species. Their supplementation can enhance immune responses, reduce disease susceptibility, and improve overall health. The appropriate doses vary depending on species, physiological state, and environmental conditions.
Cattle
1. Vitamins
Vitamin A: Enhances mucosal immunity; 30,000–50,000 IU/day.
Vitamin D: Supports macrophage function; 10,000–15,000 IU/day.
Vitamin E: Antioxidant, improves phagocyte function; 500–1,000 IU/
day.
2. Minerals
Zinc: Promotes wound healing and immune cell activity; 40–60 mg/kg feed.
Enhances neutrophil and antibody responses; 0.3 mg/kg feed.
Sheep and Goats
1. Vitamins
Vitamin A: 5,000–10,000 IU/day.
Vitamin E: 200–400 IU/day to enhance antioxidant defenses.
Vitamin D: 2,000–3,000 IU/day to maintain calcium balance and immunity.

Text titles play an essential role in creating compelling video content by providing context, enhancing storytelling, and engaging viewers. While most video editing software offers basic title features, Adobe Photoshop allows video creators to design intricate, customized titles with enhanced visual effects. Once created, these titles can be imported into video editing software, where they are integrated into the final video. This chapter explores the steps for importing text titles from Photoshop into video editing platforms, discussing techniques, examples, and best practices to ensure high-quality results.
Understanding Text Titles and Their Role in Video
Text titles serve various purposes in video production, such as conveying information (e.g., names, locations, subtitles), adding emphasis, and supporting branding. High-quality titles create a polished look and help maintain viewer interest. Photoshop provides a comprehensive toolkit for crafting these titles, including tools for color grading, typography, textures, and other effects, which video editing software often lacks.

In modern video production, one of the most critical steps in the post-production workflow is the importation of video. This process marks the transition from raw footage to a structured project that can be edited, refined, and turned into a finished product. Effective offline video editing techniques, which allow for the editing of low-resolution proxies of the original footage, are crucial for enhancing workflow efficiency, particularly in large-scale or resource-heavy projects.
This chapter will guide you through the fundamental working methods of offline video editing, focusing on the process of importing video footage into your editing system, preparing that footage for editing, and understanding how offline editing fits into the overall post-production pipeline.
1. Understanding the Workflow of Offline Editing
Offline video editing is a method used to edit a project using lower-resolution versions (or proxies) of the original high-resolution video footage. This method allows editors to work faster, save on computer processing power and storage space, and still be able to create a solid edit that can later be “conformed” to the original high-resolution footage in the final stage of post-production (referred to as “online editing”).

Impromptu speaking, the skill of delivering an unprepared yet coherent and impactful speech, is a hallmark of effective communication and leadership. From workplace meetings to social gatherings, the ability to articulate thoughts spontaneously is invaluable. This chapter explores the essence of impromptu speaking, the challenges it presents, and practical strategies to excel at it.
The Importance of Impromptu Speaking
Impromptu speaking is a fundamental skill in personal, professional, and social settings. It reflects one’s ability to think critically, adapt quickly, and communicate ideas clearly without prior preparation. Mastering this skill builds confidence and enhances credibility, making it an invaluable asset for individuals across diverse fields.
Key Reasons Why Impromptu Speaking is Important
1. Demonstrates Confidence and Leadership Impromptu speaking showcases your ability to handle pressure and remain composed in unexpected situations. This quality is often associated with leadership and inspires trust among peers and audiences.
2. Fosters Quick Thinking and Adaptability Speaking without preparation hones your ability to process information swiftly and form coherent responses. This skill is crucial in dynamic environments, where adaptability is essential.
3. Builds Effective Communication Skills Impromptu speaking encourages clarity, conciseness, and relevance, sharpening overall communication abilities. These traits are beneficial in both formal and informal interactions.

The primitive people were living as part of the environment along with other f lora and fauna in a perfect synchrony. Prior to industrialisation the people were living in an environment friendly manner without causing much damage to natural resources. During the time they were making good progress and were building huge structures which are of technical excellence even today. Post industrialisation the whole scenario changed very fast. The population increased many fold, people started making more goods than required to have a market hold to earn more – the human greed increased beyond limit.

Desi chickens reared under backyard systems face several constraints such as lower productivity, higher incidence of disease outbreaks, high mortality rates during the early stages of life, and predation. Despite these challenges, the demand for rural backyard poultry is high, particularly among tribal households in rural areas. Small rural producers typically rear colored birds and produce brown-shelled eggs from Desi backyard poultry, catering to the requirements of rural consumers.

To address these issues, there is a need for specific rural poultry production programs. The Indian Council of Agricultural Research (ICAR), New Delhi, initiated a project to upgrade indigenous low input technology birds through the All India Coordinated Research Project on Poultry (AICRPP) in various parts of the country. This initiative aims to evolve improved rural backyard poultry breeds.

14.1 Introduction

Indoor air pollution causes significant health problems for the two billion people worldwide who rely on biomass fuels for their cooking and heating needs. Over the last 30 years awareness of the environmental and social costs of using traditional fuels and stoves has grown. At the same time, studies of the problem have resulted in proven strategies to reduce both fuel use and harmful emissions. Unfortunately, the local stoves currently available do not always represent the best designs that modern engineering can offer. Although open fires are often used wastefully, carefully operated open fires can be fuel efficient and clean burning when tested in the lab. In many situations, cooks are not overly concerned with fuel use, and studies have shown that when fuel is plentiful three-stone fires can use an excessive amount of wood to cook a small amount of food. But in other places where fuel is scarce, open fires can be carefully controlled so that fuel efficiency rivals many first generation improved cook stoves.

Modern cook stoves are designed to clean up combustion first. Then the hot gases can be forced to contact the pot and increasing efficiency without increasing harmful emissions. Fires can be clean burning when expert cooks push the sticks of wood into the fire as they burn, metering the fuel. The open fire can be a hot fire useful when food or drink needs to be prepared quickly. The energy goes into the pot, not into the cold body of a stove. The open fire can burn wood without making a lot of smoke; hot fires burn smoke as it is released from the wood (Fig.14.1). Unfortunately however, many fires used for cooking are built emphasizing simplicity of use and are wasteful and polluting. Modern stoves score higher when tested than even the most carefully operated fire in the laboratory.

Fruit production is gaining momentum in the country. With the production about 90.18 million tonnes of fruits from 6.30 million ha in 2015-16, India is the second largest producer of the fruits in the world after China. During the past three decades, international trade in fruits has seen a rapid expansion.The newer markets are now opening for Indian produce e.g. Japan and USA have opened the route for Indian mangoes. At domestic level, the increase in demand of fruits for consumption both in fresh and the processed form has been evident. The income and livelihood security from this sector are increasing. The government has also supported the horticulture sector particularly area expansion and productivity enhancement of fruits through technological interventions like drip irrigation, fertigation, emphasis on integrated nutrient management, production of high quality planting material etc. Selection of an ideal variety and availability of plant material from a reliable source is the basis for achieving high yield and quality uniform produce. Lack of clonal uniformity not only leads to the problems in crop management but also the differences in maturity may cause delay in commercial picking. A number of improved fruit crops’ varieties have been developed during past few years, which ranged from the high yielding to stress resistant to high quality produce. In fruits and plantation crops more than 150 high yielding varieties suitable for various purposes have been developed. A list of some popular cultivars and new cultivars in major fruit crops has been given here (Table 1).

Introduction

Three hundred million poor people in Asia depend on livestock for their livelihoods and there are opportunities for improvement in livestock related livelihoods due to the rapid and dynamic changes that the livestock sector in Asia is undergoing (Njuki et al. 2010). Piggery farming has been recognized as one of the profitable venture among the rural masses. This venture has proved to be one of the most important livelihood option. Generally the pigs are reared for pork, considering the increasing trend of pork consumers in India; Piggery farming will certainly take a industrial form of livelihood in India in future. There are more than 12.8 million pigs in our country, out of which approximately 14.5% are graded and of exotic variety. There are 120 pig breeding farms in the country whereas pigs of exotic breeds are maintained. China ranks first in the world in pig rearing where number is around 300 million or 1/3 of the world pig population.Pig production is basically an enterprise which is able to convert inedible or inferior quality food into the food rich in animal protein. Pig is considered a machine because they convert grain, pasture and other low quality feed into Pork which is used as human food (Rahman, 2008) . Despite the fact that pig rearing is a profitable enterprise most of the progressive farmers even today hesitate to adopt it due to prejudice sentiments in our society against pig farming. For many others there is religious taboo against pig. A majority of meat eaters also and cheap source of protein. Pork as a source of animal protein is gaining popularity in India and pork products will be in greater demands in years to come. The high carcass yield attracts the farmers because of the better returns within the shortest possible time. High fertility in pigs assumes income to the rearer round the year. To bring about improvement in the productivity of pork and other piggery products extensive crossbreeding programme has been taken up to develop animals of large size, better feed conversion efficiency, high dressing percentage and better quality pork. Pig keeping also contributes to socio-cultural obligations and risk diversification and converts existing resources and low value waste products into high-value animal source food for home consumption and/or sale (NEPED, 2008).

Abstract

Vegetable crops are inherently rich sources of various health-promoting nutrients and thus they play an important role in balancing our daily diet. Being excellent source of vitamins and minerals, vegetables have a relatively variable nutrient content per unit of energy. These nutrients can be increased by proper selection of vegetables in our diet. Whereas their intrinsic quality maintains human health, the extrinsic quality has significance in determining acceptability by the consumer. Vegetables also have medicinal properties. These diversified and highly nutritive crops are of great importance in alleviating hunger and malnutrition. The present production of vegetable crops is, however, not enough to meet per capita daily dietary requirement as per dietitians’ recommendations. The vegetable production, therefore, need to be almost doubled by 2025 to meet requirement of ever increasing population from diminishing land, water and other natural resources. Although, there has been a trend of increase in production and productivity of vegetable crops since liberalization of seed trade in 1988 by Government of India, yet it has not been commensurate with the requirements. Compared globally, we are far behind in productivity of vegetable crops in spite of being second largest producer after China.

Introduction

Pearl millet (Pennisetum glaucum L.) is the most widely grown type of millet and it is an important staple food grain crop for millions of people in arid and semi arid regions of the world. Pearl millet is very well adapted crop to growing areas characterized by drought, low soil fertility, and high temperature. It is also performs well in soils with high salinity or low pH. Because of its tolerance to difficult growing conditions, it can be grown in areas where other cereal crops, such as wheat or maize, would not survive. Physiologically, it is a C₄ plant which imparts it potential to grow under hot and dry climatic conditions. Among cereals, it is highly responsive to fertilizers and has highest water use efficiency. Pearl millet is being grown as dual purpose crop for both grain and fodder in dry areas like Rajasthan where animal production is complimentary with crop production. Pearl millet is also a good source of important essential minerals for human health like Fe and Zn hence it is useful to alleviating malnutrition.

In enhancing  the food production there appears to be two solutions, viz., horizontal or vertical increase in production.  In the vertical expansion of production varieties are important. High yielding, high starch and value added varieties suitable to each region/ cropping system play vital role in enhancing vertical production.  Therefore varieties especially value added consumer preferred ecologically adaptable ones hold the key and is very much true in tuber and root crops which have a significant role in supplementing the food and nutritional requirement in rural and semi urban population of India.

India ranks third after China and Canada in the world in production of edible oilseed crops. Average yield of rapeseed-mustard in the world is 2043 kg/ha. Average yield of European Union, Canada and China is higher than India. Higher yield in these countries is due to cultivation of long duration varieties suitable for their local climatic conditions. Duration of favorable climatic condition to grow rapeseed-mustard is shorter in India as compared to EU, Canada and China, which enforces cultivation of short duration varieties (130-145days). Rapeseed-mustard contribute one third in the production of edible oils in India. These crops ranks second in area and production after soybean. Total area and production under these crops is 5.80mh and 6.28mt respectively. It is necessary to mention that total water requirement of these crop is 80-240mm, which is very low as compared to other crops. These crops pay higher return by utilizing low inputs, thus, are highly remunerative for the farmers.

Rapeseed-mustard group of crops are mainly cultivated in irrigated areas where at least one irrigation facility is available and only 24.0% of area is under rain-fed situation. Five states of India namely, Rajasthan, Uttar Pradesh, Haryana, Madhya Pradesh and West Bengal contribute 82.00% and 85.67% in total area and production, respectively, under these crops. In Madhya Pradesh 53.2% of total area is irrigated with average yield of 1006 kg/ha, however, 76.6% of total area of country is irrigated even then average yield is only 1083 kg/ha. The lower average seed yield can be attributed to (i) cultivation of very short duration and low yielding B. rapa genotypes in Eastern and North-Eastern states; (ii) susceptibility of varieties to different pests; and (iii) high temperature stress at seedling and reproductive stage. Out of total area under these crops, Indian mustard (Brassica juncea) is grown over more than 80% area. Cultivation of Indian mustard has also been taken up in non-traditional areas of southern states of India viz., Karnataka, Tamilnadu and Andhra Pradesh, recently. This has become possible due to its higher average yield, tolerance against different biotic and abiotic stresses, availability of varieties with 100-152 days maturity, and non-shattering behaviour.

Protected cultivation was introduced in India during 1985 but its progress is slow during the last 25 years due to lack of suitable varieties and hybrids for protected cultivation. Presently, area under polyhouse in India is 2000 ha, therefore, knowledge of polyhouse vegetable production technology of tomato and cucumber with intervention of drip irrigation and fertigation along with suitable varieties will be quite effective for enhancing their productivity. Therefore, it is imperative to develop hybrid seed and production of suitable varieties/hybrids at affordable prices to small and marginal farmers to achieve the targeted production potential of vegetable crops. Keeping in view some genotypes were isolated and pure line and hybrid breeding programme were adopted for improvement of these genotypes. After three years of multilocational testing at tarai, midhills and higher hills under polyhouse condition, four genotypes were identified and released. They are: Pant Parthenocarpic Cucumber 2 (1,755 q/ha) and Pant Parthenocarpic Cucumber 3 (1,605 q/ha) of cucumber and Pant Polyhouse Hybrid Tomato 1 (1,616 q/ha) with average fruit weight of 130-140 g and Pant Polyhouse Tomato 2 (1,291 q/ha) of tomato with single fruit weight 100-105 g. These genotypes were released by Uttarakhand State Variety Release Committee during May 2011 for commercial cultivation.

Introduction

Plants are responsive to the applied Non-scheduled caste, which constitute most of the vital macromolecules and metabolites related to its vegetative and reproductive cycle. The applied fertilizer N enhances crop productivity per unit area, as agricultural soil deficient in N worldwide. The fertilizer application is thus considered essential to meet the requirement of the burgeoning population, particularly in the developing countries (Abrol et al., 1999; Chanda and Sati, 2005). The farmers practicize heavy dressing of N-fertilizers in crop fields for high productivity, which has resulted into world including Indian sub-continent and China have resulted into the excessive use of N-fertilizers intending to maximize crop yield. Decrease in the organic fertilizer input and depletion of micronutrients in intensive cultivation zones have caused a decline or stagnation in the crop productivity, which  has been attempted with a further loading of soluble chemical fertilizers (Maleshwar, 2003; Kumar and Yadav, 2003; Anonymous, 2004; Chanda and Sati, 2005; Abdin et al., 2006).

India, internationally recognized as the principal producer, consumer and exporter of spices globally, is often referred to as the spice bowl of the world. A total of 75 spices out of 109 are cultivated in the country, among which
pepper, cardamom, chillies, ginger, turmeric, coriander, cumin, and fenugreek are of significant importance. The approximate export of spices during 2021- 22 was 15,31,154 MT valued at 30,576.44 crore (US $4,102.29 million)
compared to 17,58,985 MT valued at 30,973.32 crore (US $ 4,178.80 million) during the previous financial year. Indian spices are exported to more than 180 destinations, with the leading importers being USA, China, Bangladesh, Thailand, UAE, Sri Lanka, Malaysia, UK, Indonesia, and Germany. The key spice-producing states of India include Himachal Pradesh (ginger), Haryana (garlic), Karnataka (pepper, ginger, cardamom (small), chilli, turmeric and garlic), Orissa (ginger, chilli, turmeric, and garlic), Kerala (pepper, chilli, turmeric, nutmeg, mace, and clove) and Rajasthan (coriander, chilli, cumin, garlic, fenugreek, fennel, and ajwain).
Seed Spices in Rajasthan Economy
Of the 75 spices grown in India, 20 are classified as seed spices, where the economically important part is the seed.

Abstract

Sunflower seeds of variety PSFH- 67 were obtained from the PAU seed farm. These seeds were cleaned with commonly used seed processing equipment. Samples were divided into 2 parts. One part was kept as such for taking the observations of feed (control) and the remaining part was passed through specific gravity separator for its refinement. The various fractions obtained were recovery (heavier, healthy seeds), middlings (intermediate, under size) and rejections (lightweight seeds, wevil eaten, foreign matter). The respective percentages of each fraction were computed. These graded fractions as well as the feed were packed in 2-kg cloth bags and stored under ambient conditions. Different quality parameters viz. moisture content, physical purity, percent germination, thousand grain weight and vigour index were recorded at 30 days interval from Jan, 2010 to Apr. 2010. The physical purity, moisture content, thousand grain weight, percent germination, root length, shoot length and vigour index were found to be higher in recovery and minimum for rejections while moisture content was highest for rejection compared to all other fractions. The physical purity remained more or less constant throughout the period of storage. The thousand-grain weight showed a rapid decrease during first month thereafter it remained constant. There was continuous decrease in percent germination with the period of storage irrespective of the treatment.