eChapters

8.1 Climate Change

Climate change is a broad term of global negative phenomena as created predominantly by burning of fossil fuels, which add heat-trapping gases to earth’s atmosphere. The over accumulation of greenhouse gases in the atmosphere lead to increased temperature and this is called as global warming. As a result, sea-level rise; ice mass loss in Greenland, Antarctica, Arctic and mountain glaciers worldwide; shifts in flowering/ plant blooming; and extreme weather events occur.

7.1 Importance of Weather Forecast in Agriculture

In India, agriculture is in reality to be a “gamble activity” with the monsoon rain, that means the productivity and profit from agriculture depend upon the goodness of the season. If any malevolent weather situation that happens during a crop season, whether it is at the beginning of the crop season or at the mid of the crop season or at the terminal of the crop season or at the whole of the crop season, the productivity of the crops raised would be under stake. In practice the irrigated crop area is lesser than the area under unirrigated crop in India in any region except the regions where irrigation is routed through perennial rivers. Normally the production from unirrigated crop is 30 to 40 per cent of the same crop grown under irrigated condition in an environment in the same season.

In India, in a region or in a taluk, if the irrigated area is lesser than 30 per cent of total cultivable area, there is every opportunity for the occurrence of food shortage. That means assured production depends upon irrigation rather than managing the crops with seasonal rainfall alone. This clearly indicates that the higher probability of occurrence of crop production risks falls under rainfed/dry land situation. The crop production risk is also common to irrigated area like unirrigated crop but the intensity gets varied. In this context one example that happened in India can be quoted. During December- January of 1982, with the occurrence of heavy rain/snow as a result of prevalence of western disturbance weather system, the wheat crop stood for harvest at Punjab got damaged with a loss of 124 crore of rupees. If this was anticipated earlier through weather forecast development, (which is common in all developed countries) and communicated to the farmers in advance, then the yield loss would have been reduced by following some tactical decisions to be taken either by the farmers or by the concerned Government. At that time, India did not have medium range weather forecast system and hence Indian farmers met with greater losses.

Under normal weather situation, agriculture depends on timely occurrence of rainfall for crop management activities irrespective of different farming situations namely, irrigated and unirrigated agriculture. Changes in temperature and rainfall pattern together with frequent occurrence of extreme weather events are major anticipated threats from the climate change that occurs now around the world. This threat in long run, if not addressed properly, would affect food security of a country. Pratap Narain et al., (2000) observed an increase in moderate and severe drought occurrence numbers in the arid zone of India during last decade (1991-2000) as compared to the earlier decades of the last century. Similarly, Pasupalak (2008) reported daily maximum rainfall of 400.3 mm in the last decade against earlier record of 256.4 mm (1969–78) in a location at Odisha State. Further the inter- annual variation within the decade did increase and also the number of rainy days with very heavy rainfall > 125 mm also found increased in the location against the daily mean rainfall of 20 mm/day in India.

A day may be with heavy rainfall or with bright sunshine or windy or in combination of these. When heavy rainfall continues for more than a week with some system like cyclone, floods may be the result. Similarly, if dry spell continues during a cropping season for more than 15 days, drought would initiate in that region. This is again depending upon the nature of the soil water holding capacity and nature of soils, topography and green cover of that region. In between these two extremes, we have normal season, where we get normal seasonal rainfall during a cropping season. Hence like dress code, in agro-climatology, there are three weather codes, namely floods code, drought code and normal code. The jargon weather code was developed by Dr.M. S Swaminathan in India. Across the countries of the World, if these weather codes occur, the impact would be universal. The strength of adaptation capacity to maneuver these extreme events by the farming community rests with their past experience made for similar situations, financial support and also the technology options that are available from the scientific institutions.

5.1 Introduction

A Crop Simulation Model is a mathematical model which describes crop growth and development processes as a function of environment, soil conditions, and crop management. Simulation model is a schematic representation which works on set of underlying assumptions, equations and algorithms, closely replicating the behaviour of the agricultural systems. A crop growth simulation model predicts the harvestable yield. Apart from this final state of crop production, the model also provides a host of quantitative information about major processes involved in the various stages of crop development. The information covers each component of the crop such as leaves, stems, roots and harvestable products as they change over time, including the changes in soil moisture and nutrient status.

An increase in the population, demands an increase in agricultural production with available resources. Efficient management of available resources under varying weather conditions is important for increasing agricultural productivity. Besides that, the emphasis of agricultural production changes from quantity to quality and sustainability (Aggarwal et al., 2000). Solution of these new challenges lies in understanding the interaction of the numerous elements affecting the plant growth and generating a crop growth model. This extremely complicated information needs to be processed and interpreted on a spatial scale. Information technology which has unleashed new frontiers in data analysis and automation is the driving force behind this model generation. These powerful computer programmes simulate the crop growth or yield of crops under various management regimes and provide near real time information to help farmers to make strategic decision in the management of their crops.

4.1. Introduction

Many countries have set up a network of agrometeorological observatories to regularly record important weather parameters such as clouds, rainfall, surface temperature, humidity, wind and wind direction, solar radiation, soil moisture, temperature and humidity profile of the atmosphere, etc. The observation process is performed either manually or through Automatic Weather Stations (AWS).

This recorded information is used for weather forecasting, natural resources management and for tracking agricultural production. However, these networks, which handle data of high spatial climate variability, are typically less robust than they should be. Moreover, the agrometeorological data collected from different ground stations is not transmitted in real time to a central collection point which limits the use of information.

Satellite remote sensing technology is an alternative system that is gaining popularity in the recent times which has allowed us to obtain frequent and precise measurements of vital agrometeorological parameters such as rainfall, solar radiation, temperature, evapotranspiration, albedo etc. Satellite data has many advantages over traditional ground stations, such as high spatial resolution (50 m–5 km), wide spectral bandwidth range (0.4–3.75 um) and high temporal frequency (even half an hour) and the prospect of collecting data from remote areas. In addition to routine repeated observations, satellites often provide synoptic views of the earth’s surface from space on a wide scale and have archive of information to create baseline data.

The preparation, planning and use of agricultural technologies for agriculture, needs application of agricultural meteorology. The role of agrometeorology in the last three decades has increased in terms of increasing food and nutritional security for the burgeoning population and natural resource management particularly in the context of global climate change. Agrometeorology can help to minimize inputs, thus clarifying the contribution of ecosystems and agriculture to the carbon budget in the event of global change. Agrometeorological information needs to be disseminated to users in time and space quite accurately, as agricultural activities are linked to the very local situation where the outputs of modern tools such as local area models, climate models, and dynamic crop simulation models are reduced to finer grid resolution and combined using GIS to extract practical suggestions. This chapter describes the recent applications of remote sensing in Agrometeorology.

The subject on micrometeorology deals with small scale meteorology of near ground surface with its related elements of both physical and biological processes. When this micrometeorology is integrated for crop production purposes, then it becomes crop micrometeorology, which is very important in the science of agricultural climatology. This crop micrometeorology gets varied with the architecture of the crops grown, available soil moisture, agronomical practices followed, soil texture, topography of the area, the nature of climate and weather that prevails etc. The soil surface heat, exerts a profound frictional effect on wind movements and hence it is different from the air layers at higher levels. These special features constitute the microclimate, which is modified compared to a flat bare surface by factors like topography, nature of soil surface, presence of vegetation and type of vegetative cover. The presence of crop canopy leads to distinct differences in the thermal and humidity regimes of the soil, the air layers immediately above it and the distribution of radiation and wind profiles inside the canopy. The study on the physical exchanges of the transfer of heat, momentum and moisture in the microclimatic region is called as micrometeorology (Venkataraman and Krishnan, 1992).

Radha Krishna Murthy (2002) reported that the micrometeorology is the micro scale of both the physical and meteorological factors that are taking place within the ecosphere. The ecosphere means the area between just above the crop canopy and just below the root zone of a crop. Further he was on the opinion that the microclimate of valley is important as compared to the entire climate of the mountain for the bio-life of valley. For the crops purpose, the microclimate is the climate of the ground surface to top of the crop canopy or otherwise it can be called as crop’s climate, a modified one from the Stevenson’s Screen climate/weather observation.

The climate, the past weather event that existed over larger region and covering long years of more than 30 years is very important for the emergence and successful sustenance of an organism including human kind. Normally scientists talk about environment and this includes not only the soils but also the climate of the particular region. Based on this, during 1989, the Planning Commission of India divided the entire India in to 15 agro-climatic zones based on physiography and climate. This division is only for planning purposes. Subsequently under NARP, the Indian Council of Agricultural Research (ICAR), New Delhi in consultation with the Planning Commission, requested all State Agricultural Universities (SAU) to divide their State in to different sub climatic zones considering soils, temperature and other weather parameters preciously with in the major agroclimatic zone of India in which the concerned State falls. Accordingly, each SAU has divided their State into different agro-climatic sub-zones and this resulted in 129 agro-climatic sub zones in India and limited to 127 and these all fall within 15 agro climatic zones of India as done by the Planning Commission of India.

The National Bureau of Soil Survey and Land Use Planning (NBSS&LUP), Nagpur not satisfied with this division, considering soils, temperature, rainfall, vegetation and all factors responsible for ecosystem (bio-climate, length of growing period, moisture index) divided the whole India in to 20 agro-eco regions by 1992 and revised preciously again by 2015 (Mandal et al., 2016) and the revised approach is being considered as scientific tool and taken for micro-level planning in India now and those are discussed at this chapter.

1.1 Weather Parameters

The atmosphere is a gaseous component surrounding the earth as an integral part and its interaction with ocean (water bodies), other planets of the solar system and land (Earth) generates one physical product namely weather elements (temperature, pressure, wind, humidity, precipitation, etc.,) and these form the weather and climate of the Earth. The process of generation of weather and climate of the region is purely natural and cannot be modified by the human being. But they can do adaptation to the existing climate and weather for their sustainable life. The weather can be defined as day to day change in the atmosphere in terms of heat and moisture exchange, while the climate is average of long period weather covering larger area or a region.

The particular climate of a region dictates/permits the genesis of a particular bio-organism in that domain and this selected organism’s growth and multiplication are triggered by the prevailing weather of that particular climate. Hence weather parameters of the atmosphere are very important to human being and other organisms of the Earth. The details on weather elements are given in question and answer section of this book (Annexure-I)

All higher plants have some kinds of aroma or flavor in their various parts, which includes roots, stems, leaves, flowers and fruits. This flavor and aroma in a particular plant part due to the presence of some specific essential oils present in special glands in it (Chadha and Choudhury, 1989). Essential oils arethe concentrated liquid, which is highly concentrated and water insoluble liquid (hydrophobic) and it is also known as ethereal or volatile oils, which are fragrant oily liquid that are extracted from the various parts of the plants. Generally they are organic compounds like hydrocarbons likealcohols, aldehydes, esters, ketones and phenols. An essential oil is “essential” in case that it contains the essence of the different fragrance, and the properties of the plants from which they are derived. All though all ornamental plants have some aroma but only few of them are used commercially in perfumes, flavor and cosmetic industries. The essential oil demand by fragrance industry is 60%, flavour industry 20% and pharmaceutical industry 20%. In all the perfumes, rose oil is one of the best and costliest perfume. The first recorded reference of rose perfume is in CharakSanghita. The credit for discovery of rose perfume was given to Queen Noor Jehan mentioned in the book written by Md. Achem of King Jahangir’s regime.

The volatile oils showed the different kinds of biological activities including the antibacterial, antioxidant, antiviral, insecticidal, etc. These oils are also used for cancer treatment, while some other has been used for the food preservations, aromatherapy, and in the perfumery industries. Thus, in the day to day life a large spectrum of usage the essential oil and aroma industry has a bright future. Yet the known applications of essential oilsare opening up ofmore areas which will benefit the industry.

Flower arrangement is the art of using plant materials and flowers to create an eyecatching and balanced composition or display. Among all art forms, flower arrangements today take as prominent a place. The art engages ones personal involvement in welcoming guests and bringing cheer to the surroundings. It is rightly said, “Flowers are the music of the ground. From earth’s lips spoken without sound. “Professionally designed floral designs, arrangements or artwork incorporate the elements of floral design: line, form, space, texture, and color, and the principles of floral design: balance, proportion, rhythm, contrast, harmony, and unity.

Composition of Arrangements

There are a few compositions of flower arranging that should be considered. Once we understand these we can create so many different styles and our floral designs will have that professional look.

Floriculture has flourished with a considerable growth and a useful crop diversification option, particularly for small farmers over the past three decades. The commercial production of the cut greens has started in India in recent years and has huge demand in the market. They are suited for year round production with low investment and less care and maintenance. Cut greens or fillers are an important component of the floricultural industry and their commercial value depends on vegetative characters, such as stem length, leaf colour, density and side branching. Cut foliages (leaves and stems), which are attractive in form, colour and freshness, are lasting and in great demand. They have various other uses in making attractive fresh floral designs and floral arrangements, such as bouquets, wreaths, decoration of house interiors, etc. Evergreen plants with green, silver or variegated leaves are usually used and species with berries are now also becoming popular. Fillers are critical components in most arrangements as the flowers themselves,used to increase the volume and size of the bunch and provide colour contrast. These floral produce have various other uses in making attractive fresh floral designs and floral arrangements, such as bouquets, wreaths, decoration of house interiors, etc. Colour, freshness, stem length, freedom from pests, fragrance and vase life are important quality aspects of fillers. In the International market, fillers accounts for about 16 percent of the total trade by volume with an annual turnover of more than Rs 800 crores including selling of ornamental leaves, filler flowers, dry and dyed flowers along with berries and capsules. On the contrary, fillers representvery less quantum with poor quality in the domestic market and are unsuitable for cut flower bouquets. Their share in the market is very low and fetches nominal rates.

Flowers and various parts of the plant have been used for decoration and to commemorate various religious, festive, matrimonial and social gathering events in day to day life. The main drawback of fresh flowers and foliage is being highly perishable and delicate which cannot retain their beauty for longer durations. Moreover fresh flowers are not available round the year which can be overcome by the dehydration and drying techniques. Since ancient times, in Egyptian pyramids, fragrant dried flowers and herb garlands were encased along with mummified bodies. Japanese people created “Oshibana”, the “preserved flower art” of enduring designs to retain the exquisite beauty of the living plants centuries ago.

Later on, this craft making technique spread from Japanese to Victorian England because of their beautiful long lasting appearance. During middle ages monks dried flowers, foliage, and herbs for use in decorative motifs or for colouring their handprinted books.

Dried flower arrangements have been popular in Europe for centuries, and as early as 1700 AD, colonial Americans used dried flowers to brighten their homes, especially during the dark winter months.

Earlier botanists practiced dried flowers in the form of herbarium for the purpose of identification of various plant species. Though drying of flower was well known even in the past but for the first time the flowers were dried commercially in Germany (Sankari and Anand, 2014).

Floriculture is a high value industry. It is increasingly regarded as a feasible diversification option from traditional field crops due to increased per unit returns and increasing habit of ‘Greeting with Flowers’ during all the occasions. With increasing awareness among consumers and pressure from the artificial floral products on the fresh flower industry, and continued competition even amongst the growers, whole salers and retailers, quality is becoming increasi ngly important. The aspects related to visual quality of the product are the main determining indices of consumer’s acceptability of flowers.

The important flower crops in the international market are rose, carnation, lisianthus, chrysanthemum, gerbera, hydrangea, gladiolus, gypsophila, bird of paradise, orchids, anthurium, tulip and lilies etc. Cut flowers have the highest economic value and are the most perishable. Their high respiration rates, rapid deterioration, and susceptibility to damage require the utmost care during postharvest handling for quality maintenance. The post-harvest losses can be both, quantitative as well as qualitative, which ultimately result in loss in terms of its monetary value.

Floriculture industry is facing main problem due to highly perishable nature of its flowers which demand for appropriate post-harvest handling techniques to maintain the quality. With changing scenario in international floriculture trade, perfection in post-harvest technology is mandatory to offer quality plant products to the consumers round the year. The post-harvest life of cut flowers and flowering pot plants can be extended relatively by a range of treatments and technologies. Quality factors that influence the post- harvest keeping quality and flower longevity are environmental factors as well as the influence of the pathogenic organisms. Due to perishable nature of cut flowers, huge post-harvest loss is there which ranges from 30-50 per cent. Qualitative losses which include consumer acceptability of fresh produce are much more difficult to measure than quantitative losses. Quantitative losses can occur during the entire post-harvest and marketing chain due to lack of proper post harvest handling (Bhattacharjee, 2006). These losses could be on a higher side, which might be due to lack of knowledge on ‘post-harvest handling’ of cut flowers and proper infrastructure for post-harvest management and storage. However, all these losses can only be minimized by proper technique of harvesting, post-harvest handling, packaging, storage, marketing and value addition of flowers.

Lotus being a national flower of India, is closely associated with religion and culture. It is a perennial, aquatic crop that is grown and consumed throughout Asia. The edible parts of lotus are Leaves, flowers, seeds and rhizomes, and the flowers are also used in religious ceremonies. Lotus flowers are also, used for extraction of perfumes. It is one of the oldest plants in the world Archaeologists in China found Lotus seeds with estimated ages of 5,000 years in 1972 in Yunnan Provincelagoons.

During the pre-historic period, the South India Dravidians used lotus flowers (pundarika) as their food, much earlier than the people of the Indus Valley civilization (3000-2000 BC). However, there is no evidence of lotus being present during the Indus Valley culture of the Mohenjo Daro and Harappa period in northern India. The Rigveda reference that lotus was made by the Aryans (2000-1500 BC) wherein it is also mention that lotus can be used as food. Subsequently, lotus was mentioned in the Vedas, Upanishads, Puranas, Slokas, plays and other ancient Sanskrit literature. The lotus symbol is not only mentioned in the scriptures of Hinduism but it also occurs in the Buddhist and Jainism literature.

In the Arthasastra (350-300 BC) by Kautilya, the great diplomat during the golden age of Chandra Gupta, it is recorded that one of the varieties of sandal wood possesses the fragrance of lotus. The Mughal kings were also attracted towards the beauty of lotus. While describing Agra, the Mughal king Jehangir (1605-1627 AD) in his memories Tuzuk-i-Jehangiri, mentioned a memorable scene of a tank full of exquisite red lotus flowers, the like of which he had not seen before.

Marigold (Tagetes spp.) is an important annual flower crop; native to Central and South America especially Mexico and belongs to family Asteraceae (Compositae). It is commonly known as “Gainda” in India and also called as “Friendship Flower” in United States of America. Loose flowers of marigold are in great demand throughout the year. It is commercially grown in tropical and subtropical regions of India owing to its ease in cultivation, hardy nature, wider adaptability and year round availability of single, semi-double and double flowers of vibrant colours. Marigold is grown over an area of about 66.09 thousand hectares with production of 603.18 thousand MT loose flowers in India. Major states involved in loose flower production of marigold are Karnataka, Madhya Pradesh, Gujarat, Andhra Pradesh, West Bengal, Maharashtra, Haryana and Chhattisgarh. In India, Assam is the only state, which produces marigold for both cut as well as loose flower purpose on an area of about 0.61 thousand hectare (Anonymous, 2016a).

Marigold is a cross-pollinated flower crop and it is pollinated by insects (Kaneko et al., 1990). It bears terminal and solitary inflorescence, known as head or capitulum, which possesses long and hollow peduncle with swollen apex and campanulate involucres (Setshogo, 2005). Capitulum consists of peripheral ray florets and central disc florets. Ray florets are pistillate, ligulate, sessile, epigynous and zygomorphic, whereas, disc florets are bisexual, tubular, sessile, epigynous and actinomorphic (Subrahmanyam, 1996 & Setshogo, 2005).

African marigold (Tagetes erecta L.) is a diploid species (2n = 2x = 24), while, French marigold (Tagetes patula L.) is a tetraploid species (2n = 4x = 48) with basic chromosome no. of x = 12 as revealed by breeding work of various researchers (Towner, 1961, Chen and Lin, 1981, Chen and Lin, 1982, Serrato-Cruz et al. 2000, Zhang et al., 2011). Tagetes erecta and Tagetes tenuifolia are diploid species, whereas, Tagetes patula, Tagetes minuta, Tagetes biflora and Tagetes remotiflora species are tetraploid in nature (De, 2017). On the basis of floral morphology; three different types of male sterile systems i.e. apetaloid, petaloid and gynomonoecious types was observed in African marigold (Prakash et al., 2016). Out of these, apetalous male sterility (femina type) is more reliable and preferred over petalous male sterility because later is more prone to break down (Goldsmith, 1968 & Janakiram, 2004). Apetaloid male sterility was controlled by single recessive gene (Prakash et al., 2016). A monogenic recessive male sterile apetalous mutant was detected from T. erecta population by Khoshoo (1979). Cyto-genetic male sterility is also found in marigold (De, 2017). Petaloid and gynomonoecious male sterile systems were controlled by cytoplasmic inheritance (Prakash et al., 2016). In marigold, cytoplasmic genetic male sterile lines were also developed for commercial production of F_l sterile hybrids (Pratibha et al., 2000).

Jasmines constitute a group of traditional flower crops which are commercially grown for their fragrant flowers and essential oil production. There are trailing, climbing, and erect growing species and cultivars in the genus Jasminum. The genus Jasminum comprises of more than 200 species which are known to occur in different tropical and subtropical regions of the world. The countries growing Jasmines on a commercial scale are India, France, Italy, Morocco, Algeria, North Africa, Egypt and Spain. More than 80 Jasminum species are found in India, of which only four species viz., Jasminum sambac (Mogra / Gundumalli), Jasminum auriculatum (Jui / Mullai), Jasminum multiflorum syn Jasminum pubescens (Kunda / Kakda) and Jasminum grandiflorum (Jai / Pitchi) are widely used for commercial cultivation. Jasmines are commercially grown in many parts of the country as a dry land crop. The leading states in jasmine production are South Indian states like Tamil Nadu, Karnataka and Andhra Pradesh. In India, the commercial cultivation of jasmines are popular in Athoor, Coimbatore, Dharampuri, Dindigul, Erode, Krishnagiri, Madurai, Nilakottai, Periakulam, Salem, Thiruchirapalli, Thirunelveli, Thiruvallur, Tirumanagalam, Vellore, Virudhunagar etc. in Tamil Nadu; Bangalore, Bellary, Kolar, Mysore, Shimoga, Tumkur etc. in Karnataka ; Hyderabad, Khammam, Mahbubnagar, Mancherial, Ranga Reddy, Sangareddy, Vikarabad, Warangal Rural, Yadadri etc. in Telangana; Anantapur, Chittoor, Cuddapah, East Godavari, Guntur, Krishna, Kurnool, Nellore, Prakasam, West Godavari etc. in Andhra Pradesh; Ahmednagar, Aurangabad, Pune, Sangli etc. in Maharashtra; Ahmedabad, Anand, Bharuch, Bhavnagar, Kutch, Vadodara etc. in Gujarat; Gazipur, Jaunpur, Kannauj etc. in Uttar Pradesh; Ajmer, Jaipur, Kota, Udaipur etc. in Rajasthan; Panskura Ranaghat etc. in West Bengal; Guwahati, Hoja, Jorhat etc. in Assam ; and parts of Punjab and Delhi. Jasmines contributes markedly to the national economy and it is estimated that annually more than 20 crores worth of jasmine flowers are produced and traded in India and are also exported to countries like Malaysia, Singapore, Sri Lanka, UAE and United States (Safeena et al., 2017).

Statice, botanically known as Limoniumis very highly demanded ornamental plant. It is also known as ‘Sea Lavender’ owing to its color and place of growth. The genus name Limonium is from Greek name ‘leimon’ which translates to origin ‘a meadow’, most suitable as many species are found growing near marshy lands or salty areas of sea shore. The statice plants have very wide adaptability and can be seen growing under a wide range soil and climatic conditions like sea shores, marshy lands, deserts and plains etc. Statice figures in top 20 cut flowers sold worldwide but information on its trade, volume, export-import and number of stems sold etc. is not available. The reason for this may be attributed to classification systems, data collection categories and frequently changing nature of the assortments in the international flower market. Comprehensive trade statistics are difficult to locate for Statice. However, Statice figured in top 10 imported products in the Netherlands way back during 2013, 2014 and 2015. Though it is presently not among the top 10 flowers category, still it enjoys the immense popularity among the growers owing to its ease in cultivation and other characteristics. It is cultivated as annual as well as perennial crop, as different species have been domesticated for this purpose.

Lily is one of the most beautiful and popular ornamental bulbous flowers. They belong to the genus Lilium of the family Liliaceae, which comprises of 110 species classified into seven taxonomic sections: Lilium, Pseudolirium, Martagon, Sinomartagon, Archelirion, Leucolirion and Oxypetalum. All species are distributed over the mountainous area in the Northern Hemisphere (10° to 60°), mainly in Asia, North America and Europe. Especially, China, Nepal, Korea and Japan are the major centres of lilium gene pool around the world. Being second amongst the bulbous flower crops in the commercial market, Lilium has 4^th position among cut flowers in Flora Holland (Flora Holland Annual Report 2017). In the language of flowers lily is known as symbol of purity and innocence. Majority of cultivated lilies are either hybrids or selections. A large number of species and hybrids can be used in ornamental gardens even though the lily requires little more attention than any other bulbs. Many species of lily (L. leichtlinii, L. lancifolium, Lilium candidum and L. auratum) are also edible and having medicinal value.

Importance and uses

Lilies are one of the most important bulbous ornamental plants with varies uses, grown in border, beds, pots, landscape gardens and are excellent cut flowers of magnificent appearance and beautiful flowers. Roman naturalist and writer, Plinius, recorded that salves and oils were prepared from leaves and flowers of the Madonna lily, or L. candidium. Some species are also known for medicinal and food values, which increased its economic importance many folds. The mucilaginous substance coming out from the bulbs while cooking is used as an ointment for tumours, ulcers and inflammations. The plant was really more of a miniature household pharmacy. Different compounds have been reported in this genus, such as carbohydrates, proteins, fats, amino acids, vitamins, alkaloids, phenolics, flavonoids, carotenoids, sterols, steroidal saponins, and steroidal glycoalkaloids. Alkaloids, steroidal saponins, flavonoids and polysaccharides have been isolated from L. lancifolium and L. brownii var. colchesteri bulbs. Flowers of Lilium candidium contain an alkaloid. Extract of Lilium polyphyllum bulb has been used as refrigerant, expectorant, aphrodisiac, diuretic, antipyretic and tonic (Warrier et al., 1997; Dhyani, 2007). In the customary system of medicine, this species reported to restore health immediately and works as antioxidant in the body. Lily oil is an aid in childbirth. The white lily was also renowned as a cosmetic.

Dahlia (Dahlia variabilis Desf., family: Asteraceae, origin: Mexico) is regarded as a premium specialty cut flower besides its utilization for garden decoration and growing as a potted flowering plant. The dahlia flower symbolizes elegance, inner strength, creativity and dignity. It is herbaceous rooted perennial valued for their majestic and attractive display of colourful spectacular flowers. The generic name “Dahlia” was coined by Swedish botanist “Andreas Dahl”. Dahlia was introduced in India during 1857 under the auspices of the “Agri-Horticultural Society of India”, Calcutta. Dahlia exhibit wide range of flower from and size ranging from miniatures (less than 2.5 cm across), to giant (more than 40 cm in diameter). Dahlia flowers profusely and its easy cultivation have made these very popular worldwide. The commercial value of this crop has been exploited in certain countries only. The Netherlands is claimed to be the largest producer of tuberous rooted dahlias. Other countries cultivating Dahlia as a specialty cut flower are Japan, France, South Africa, the U. K., Italy, Germany and the United States. The commercial cultivation of dahlia in Indian subcontinent is limited to hills and plains of Eastern India (Misra and Misra, 2017).

Holland takes the lead in dahlia bulb production cultivation neeary 400 ha, followed by France and Chile. There are 41 international associations concerned with the cultivation and spreading awareness about dahlia as a potential specialty cut flower and flowering potted perennial. Societies such as National Dahlia Society in the UK, the American Dahlia Society (ADS), other groups of New Zealand in European countries, France and Germany have been maintaining Dahlia germplasm for developing novel flower colour and breeding dahlias for their uniform and profuse flowering, longer flower duration, stem sturdiness and longer vase life.

Zingiberales is an important order in Kingdom Plantae with eight families in which most of them are important as far as commercial horticulture is concerned. The order includes fruits (bananas and plantains), spices (ginger, turmeric, cardamom), medicinal (arrowroot, galangal) and ornamental (Heliconias, Bird of Paradise, Marantas, Canna, Costus, etc) plants. Among the ornamental zingiberales, plants of Strelitziaceae and Heliconiaceae are gaining popularity for its aesthetic preferences and marketable cut flowers. The unique colour and enhanced vase life of inflorescences makes them as flowers of choice. The plants of other families such as Marantaceae, Cannaceae, Costaceae, Zingiberaceae, Lowiaceae and Musaceae are also gaining momentum in floriculture business for their cut foliages and inflorescences. Some plants such as calathias are admired as potted plants and for indoor gardening.