eChapters

Introduction

The increasingly precarious situation facing the world’s hill regions has been the focus of a growing level of awareness over the past two decades. The high altitude regions offer a challenge to agricultural development agencies which is shared by many hill areas of the world characterized by marginality, extreme diversity, environmental fragility and complex smallholder farming systems. There is justifiable concern relating to the conservation of hill and mountain ecosystems, to the extent that the concept of sustainability has been adopted as a broad slogan by the environmental movement (Lele, 1991).

Conditions specific to mountain regions, such as inaccessibility and diversity have placed a high premium on large families, encouraging population growth. Children are essential to family subsistence strategies offering free labour, and they are consequently considered to be a source of wealth. Population control measures in these regions have ignored this scenario (Sharma and Banskota 1990; Jodha, 1991).

DEFINITION

Pheromones are chemical produced as messengers that affect the behavior of other individuals of insects. The term pheromone was introduced by Peter Karlson and Martin Liischer (1959) and is based on the Greek pherein (to transport) and hormon (to stimulate) is a chemical that triggers a natural behavioural response in another member of the same species. There are alarm pheromones, food trail pheromones, sex pheromones. And many are others that affect behaviour or physiology. Their use among insects has been particularly well documented, although many vertebrates and plants also communicate using pheromones. Pheromones are chemicals released by an organism into its environment enabling it to communicate with other members of its own species.

A number of plant substances have been considered for use as insect antifeedants or repellents, but apart from some natural mosquito repellents, little commercial success has ensued for plant substances that modify arthropod behavior. Several factors appear to limit the success of botanicals, most notably regulatory barriers and the availability of competing products that are cost-effective and relatively safe compared with their predecessors.

Farmers still rely heavily on insecticides because of their efficiency, portability, and speedy returns on investment. Although synthetic organic insecticides are highly efficient, their widespread usage has led to toxicity to natural enemies, toxic residues in plants and the environment, insect resistance, and a resurgence in insect populations. Ripper (1956) first time recognized the problem of resurgence in plant protection.

Metcalf (1986) distinguished between two types of resurgence: primary insect resurgence, in which populations of target insects that had been suppressed by insecticide application quickly recover to excessive levels (Fig. 1.A), and secondary insect outbreak, in which non-target species develop into serious insect s after insecticide application (Fig. 1.B).

Primary insect resurgence

Primary insect resurgence occurs when the target insect population increases to at least as high (Hajek, 2004) or higher (Hardin et al., 1995) than in an untreated control or higher than before the treatment (Pedigo and Rice, 2006).

Secondary insect resurgence/ secondary insect outbreak (Type II resurgence)

The phenomenon known as replacement of a primary insect with a secondary insect, or secondary insect outbreak, occurs when the population of a non-target insect, which is harmful to the crop, experiences a surge following the application of a insecticide aimed at controlling the population of the primary insect. A second insect outbreak is also called resurgence. A secondary insect outbreak is the rise of a non-target species after an insecticide has been used.

19.1. Introduction

A wave of research on insect pheromones has been initiated in early 1960’s in response to public concern and alarm about chemical pesticides to develop an elegant and ecologically safe technology for the control of insect pests. Pheromones, a class of semiochemicals are considered as ‘Biochemical Pesticides’, belong to the subdivision of Biorational pesticides which include “Microbials” (Viruses, Bacteria, Pathogens etc.) and “Biochemicals” (insect plant growth regulators, semiochemicals etc.). The term biorational (biological + rational) pesticides can be defined as the use of specific and selective chemicals, often with a unique modes of action, that are compatible with natural enemies and the environment, with minimal effect on non-target organisms. Biorational control is based on a diversity of chemical, biological and physical approaches for controlling insect pests which results in minimum risk to man and the environment (Horowitz  et al., 2009).

History

• Aristotle (384-322 BC): A good beginning of taxonomy was made by Aristotle (Historia Animalium). He erected entomon. He could distinguish mandibulates and haustellates; winged and wingless forms. The insect orders like coleopteran, dipteral, psyche (Lepidoptera) were created by him. Hence, he was called as Father of Biological Classification.

• Linnaeus (1707-1778): Father of Taxonomy and Binomial Nomenclature. He coined the term Insecta. He used the term Systematics. His greatest contribution is Systema Naturae.

• Brawer (1885): Laid foundations for modern system of classification and responsible to divide class Insecta into Apterygota and Pterygota.

• Michael Anderson (1727-1806): Contemporary and rival of Linnaeus. Introduced Numerical Taxonomy and hence is called Father of Numerical Taxonomy. 

• Johan Christian Fabricius (1745–1808), the first systematist considered to specialize on insects, published in 1778 his Philosophia Entomologica (40), the first textbook of entomology.

• Fabricius had already set forth his system of insects in 1775 (Systema Entomologiae), his system of genera in 1776 (Genera Insectorum), and then numerous works on species, culminating in individual accounts of the species of each order

1. Introduction
Aquaculture, the farming of fish and other aquatic organisms, has experienced exponential growth over the last few decades, becoming one of the fastest-growing food production sectors globally. This expansion is driven by the rising global demand for seafood, fueled by population growth, increased per capita consumption, and the recognition of fish as a healthy and nutrient-rich food source. According to the Food and Agriculture Organization (FAO), aquaculture now supplies more than half of the world’s fish for human consumption, a significant leap from the 1980s when it contributed only a fraction of global seafood production. However, this rapid growth poses challenges, particularly with respect to sustainable feed production.
One of the primary concerns in aquaculture is the reliance on fishmeal, a high-protein feed ingredient traditionally sourced from small, wild-caught fish species such as anchovies, sardines, and menhaden. Fishmeal is rich in essential nutrients, particularly amino acids, omega-3 fatty acids, and micronutrients, making it an ideal component for aquafeeds. However, its dependence on wild fish stocks has raised sustainability concerns, as the continuous harvesting of these species can lead to overfishing, biodiversity loss, and ecosystem degradation. Moreover, the rising demand for fishmeal in aquafeeds, coupled with finite fishery resources, has driven up its price, making it less economically viable for aquaculture operations, especially for small-scale farmers.

Onion production is constrained by insect pests and diseases that damage seedlings, foliage, roots and bulbs and reduce both yield and market quality. Important pests include onion thrips, leaf miners, cutworms, armyworms and onion maggots. Major diseases include damping-off, basal rot, downy mildew, purple blotch, white rot and pink-root rot. Some insects also transmit damaging viral diseases. This chapter presents integrated cultural, biological, botanical, behavioural and chemical strategies for managing these threats. Crop rotation, sanitation, healthy planting material, proper spacing, resistant varieties, traps, barrier crops, beneficial microorganisms, natural enemies and need-based pesticides are discussed as components of sustainable crop protection and resistance management.

Introduction

Medicinal plants are known to Indian traditional healers since time immemorial. The plants were collected from the wild and were used in many preparations of wellness products. India is endowed with diverse group of medicinal plants accounting for more than 8000 species which are being used in more than 10,000 herbal products. Ninety percent of herbal industry’s requirement of raw materials is meted out from the natural ecosystem-forests-resulting in ruthless exploitation and destruction of its natural habitats (Mathivanan et al., 2016). Medicinal plants are cultivated or found in the wild throughout the country and are used for various purposes including traditional herbal remedy (infusion, tincture and decoction) and extraction of phytochemicals for homoeopathic and ayurvedic drugs, cosmetics, neutraceuticals/dietary supplements, functional foods and aroma therapy oils (Nagpal et al., 2004). The large scale cultivation of medicinal plants may face the problem of sudden appearance of large populations of insect pests in a single crop. Like other plants, medicinal plants too have to bear the devastating effects of injurious insect-pests, which are not only harmful for the plant but also, deteriorate the quality of the produce, thus hampering its medicinal value.This chapter discusses major insect-pest and their eco-friendly measures in medicinal plants so that a package of practices can be recommended for an easy adoption even by small and marginal farmers and gardeners in India.

The vegetables form an essential component of the human diet especially in case of India and some South Asian countries where sizeable population is vegetarian. India ranks second in the production of vegetables after China and occupy 5.993 million hectares area and the total annual production is around 90.83 metric tonnes (Gopalakrishnan, 2007). There is a need of around 5-6 million tones of food to feed 1.3 billion India’ population by 2020 AD. It is an established fact that any attempt at improvement of agricultural production by using new cultivars with the recommended package of practices has invariably resulted in the increase in activity of damage by pests and diseases. Vegetables are more prone to insect-pests and diseases mainly due to their succulence as compared to other crops. The pest problems on vegetables can be more serious because of the favourable conditions which are provided for multiplication by the present methods of cultivation. The major constraints in vegetable production include the extensive crop losses due to increased pest infestation directly or due to viral diseases vectored by insects. The extent of crop losses in vegetables varies with the plant type, location, damage potential of the pest involved and cropping season. The crop losses to the tune of 40 per cent have observed in vegetable crops. The increased demand and limited productivity of local cultivars, led to introduction of high yielding varieties and hybrids. As a result dramatic changes in pest scenario occurred and minor pests became major pests. Indiscriminate use of pesticides has led to severe ecological consequences like destruction of natural enemies, effect on non-target organisms, pesticide residues in vegetables and resistance of the pests to pesticides. The modern pest management is aimed at educating the farmers on various issues of pest management like identification of the pests, natural enemies, and judicious use of pesticides with alternate methods of pest control like cultural, mechanical, biological and behavioural (use of pheromones) management. The strategy for the control of insect-pests on vegetable crops is necessarily to be different from the other crops because of the nature of utilization of vegetables. This is especially true in the case of chemical control. Insecticides which are highly toxic and are known to leave hazardous residues cannot be recommended on vegetables. The vegetable crops have been grouped into summer and winter vegetables depending upon their season of cultivation in majority of areas. The present chapter deals with the insect pests infesting summer and winter vegetables and their possible management options.

INTRODUCTION

The interactions of plant communities – natural or man-made, with their pests are invariably complex, and the complexity further increases with the diversity of the system. When a farmer adopts agroforestry instead of monocultures, the opportunities of relatively easy monitoring of the pest and their frequent disturbance through crop rotation, tillage and burning are traded against a greater stability of the system with an increased potential for self-regulation, which is however complex and more difficult to control. For this trade to be successful in reducing pest risks, agroforesters should not merely rely on increased diversity, but should attempt to integrate into their decisions the full range of traditional and scientific knowledge on the interactions between plant species, planting designs and management practices on one hand, and pests and their natural enemies on the other hand. This obviously requires collecting knowledge and organizing in more systematic way than up to now.

India is contributing about 10% of the world’s vegetables, and in terms of production, the country stands second after China. The existing area under vegetable cultivation in India is around 6.89 million hectare with a production of about 96.54 million tonnes. There will be a demand of 151-193 million tonnes of vegetables in India by 2030 (Dhaliwal et al., 2006). There are extensive crop losses in vegetable crops due to increased insect infestations. Since vegetables are grown round the year, there is carry over of insect-pests across the seasons and also from sowing until harvesting. Vegetables also invite more pest problems because of their cultivation under high fertility conditions leading to high plant succulence. High yielding varieties and hybrids are further more prone to the attack of insect-pests. Insect infestation affects the quality and market value of vegetables adversely and it is estimated that 30-40% of the total production is lost due to the attack of pests (Lal et al., 2004). A large number of pesticides are being used repeatedly to manage the insect-pests in India. Indiscriminate use of pesticides has led to many problems like toxic residues in edible parts of the vegetables, adverse effects on non-target organisms and beneficial insects, resurgence of secondary pests and development of resistance in major pests to pesticides and also environmental pollution. Therefore, latest approach has been to minimize the use of highly toxic insecticides by integrating different strategies of pest control like use of biological control agents, pesticides of plant origin, insect resistant varieties and other cultural practices. In this chapter, efforts have been made to highlight the distribution, host range, identifying characters, biology and nature of damage of important insect-pests of vegetables and also the methods of their management crop or pest wise.

MAJOR INSECT-PEST OF MANGO

1. Mango hopper (Idioscopus atkinsani, I. niveosparsus, I. clypealis)

This is one of the most serious pests of mango. They are small greenish wedge-shaped insect. They cause serious damage to the crop at the time of flowering and fruiting. Both adult and nymphs suck sap from the tender plant parts, inflorescence, young shoots and panicles. They excrete sugary shirring substance on which shooty moulds develops. Cloudy and humid weather are favourable for their development.

Efficiency of pest control by insecticides is dependent on the correct type of pesticide formulation applied at the proper time and correct dosage, besides the good equipment. Equipment used to apply insecticides must be suited to the crop (or other situation in which the pest is to be controlled), to the scale of operation, and to the formulation of chemical to be applied. In the long run, it is good economy to buy the best equipment available.

Application equipment of high quality means not only good, durable construction but also good design that gives it a professional appearance. Because it is desirable and often necessary to utilize pesticides in a variety of ways, various types of dispensing equipment have been developed. This equipment is placed in the following categories: (1) Sprayers, (2) Dusters, and (3) Granule Applicators. In addition, specialised equipment of various sorts (such as mist machines and fog generators) are available for particular purposes. Since detailed consideration of pesticide application equipment is out of the scope of this book, only a brief consideration is given here to some important features of the main types of equipment.

Insecticide classification majorly divided into three categories. A. based on chemical group, B. mode of entry in the insect, C. based on toxicity.

A. Classification of Insecticides based on chemical group

Historians have traced the use of pesticides to the time of Homer around 1000 B.C. earliest records of insecticide use pertain to the burning of “brimstone” (Sulfur) as a fumigant. Pliny the Elder (A.D. 23-79) recorded most of the earlier insecticide uses in his Natural History and included among these was the use of gall from a green lizard to protect apples from worms and rot. Later, a variety of materials used viz., extracts of pepper and tobacco, soapy water, whitewash, vinegar, turpentine, fish oil, brine, lye and many others. At the beginning of World War II (1940), insecticide selection was limited to several inorganic compounds, arsenicals, petroleum oils, nicotine, pyrethrum, rotenone, sulfur, hydrogen cyanide gas, and cryolite. It was during World War II that opened the Chemical Era with the introduction of a totally new concept of insect control.

Introduction

Analysis of insecticide formulations are critical for the availability of quality insecticides in the market for ultimate benefit of farmers and ecosystem health. This chapter highlights the significance of comprehensive insecticide formulation analysis protocols, encompassing methods for determining active ingredient and assessing physical and chemical parameters. Employing advanced analytical techniques such as spectroscopy and chromatography for insecticide formulation analysis will eventually maintain the quality of insecticides for the sustainable management of pests.

In India, over 339 pesticides are registered that includes insecticides, fungicides, herbicides (DPPQS, 2024). The current market of non-genuine insecticide is INR 3,200 crores (USD 525 Million) which constitutes 25 per cent by value and 30 per cent by volume of the total domestic market of agrochemicals in India as per Industry reports, primary interviews, news articles and Tata Strategic analysis (FICCI, 2015). Monitoring registration and regulation of insecticides is governed by the Insecticide Management Bill 2020, which replaced the Insecticide Act 1968 (DPPQS, 2023). The Insecticide Act of 1968 established the Central Insecticide Laboratory, Faridabad, under section 16 with two regional insecticide testing laboratories at Chandigarh and Kanpur (DPPQS, 2023). Current Quality Control of Insecticides in States/UTs during the last five years shows that 68078 insecticide samples were analysed (DPPQS, 2023). In the beginning, these laboratories involved in analysing insecticide samples drawn by any officer or the body authorized by the Central or State Governments and submit certificates of analysis to the concerned authority. Regional Pesticide Testing Laboratories (RPTLs) had a huge target of analysis of 1550 samples per annum that necessitated the establishment of 71 State Pesticide Testing Laboratories (SPTL) spread across India of which 14 are NABL accredited (DPPQS, 2023).

Formulation is a word that can be used in a lot of different ways, but at its core, it means putting things together in the right way, usually by following a formula. Insecticides come in different forms, which are called formulations. A formulation is just the way a product is used. The chemical or biological makeup of a pesticide and its active ingredient (also called the active substance) determine how it works on living things. Most of the time, the active ingredient is mixed with other things, and the product as it is sold will need to be weakened even more before it can be used. Formulation makes a drug easier to handle, store, and use. It can also have a big effect on how well it works and how safe it is.

Insecticides come in many different forms because the active ingredients vary in how easily they dissolve, how well they kill pests, and how easy they are to handle and move. The pesticide is made up of both active and non-active (used to be called “inert”) chemicals. The manufacturer will need to know the identity of the pest, as well as details about its feeding behavior, reproduction, and life cycle, in order to create an effective formulation. Manufacturers also take into account factors including surface and equipment type, runoff and drift rates, pest habits, and safety when formulating insecticides. Inactive materials (adjuvants/ additives) are often added to insecticides to make them stick to the application surface or spread out over leaves. There are solvents (liquids) that dissolve the active ingredient, carriers (liquids or solids) that aid in the delivery of the active ingredient, etc.. Boosting the efficacy of active ingredients requires additives, such as spreaders, stickers, wetting agents, compatibility agents, foaming agents, etc.

Insecticide use for agriculture has increased along with food quality and quantity, but self-harm has also increased. Despite a high rate of insecticide poisoning and sometimes usage for homicide, little is known about insecticide management.

Insecticide poisoning kills up to 300,000 people around the world every year. According to hospital admission data, most estimates of insecticide poisoning in the short term have been based on numbers of people poisoned by insecticide s. This represents only a small part of the real number, as it includes only the most dangerous cases. IS 4015 is a standard guide for handling cases of pesticide poisoning.

Fresh vegetables are essential part of a healthy diet as it is an important source of vitamins, minerals and fibers. The nutritional content of vegetables varies considerably, though generally they contain little protein, fat and varying proportions of vitamins such as Vitamin A, Vitamin K and Vitamin B6, pro- vitamins, dietary minerals and carbohydrates (Woodruff, 1995; Whitaker, 2001).

Fresh vegetables are essential part of a healthy diet as it is an important source of vitamins, minerals and fibers. The nutritional content of vegetables varies considerably, though generally they contain little protein, fat and varying proportions of vitamins such as Vitamin A, Vitamin K and Vitamin B6, pro-vitamins, dietary minerals and carbohydrates (Woodruff, 1995; Whitaker, 2001). Vegetables contain multifarious other phytochemicals, some of which have been claimed to have antioxidant, antibacterial, antifungal, antiviral and anti-carcinogenic properties (Steinmetz and Potter, 1996; Gruda, 2005). A balanced diet should contain 250 - 325 g of vegetables and the average human requirement for vegetable is 285 g per person per day (Attavar, 2000). This perception of nutrition makes vegetables as a valued farm output.