eChapters

Introduction

The growing interest in agricultural production over the past few decades has resulted in more farming systems that rely on chemical pesticides or chemical fertilizers, which has seriously harmed the soil, water, air, and climate while paying little attention to quality or concern for the agricultural system’s negative effects on ecosystems. But as time went on, scientific research began to focus on sustainable agriculture, organic farming, clean agriculture, and other ideas that eventually evolved into agricultural systems that maintain the balance in all areas of the agricultural and production process, as well as consumer and environmental concerns. These agricultural approaches have attracted the attention of numerous farmers, and many large farms are now interested in organic farming in the context of sustainable agriculture. The idea of sustainable agriculture is simply the production of food, fiber, other plant products, or even animal products using agricultural techniques that protect the environment, public health, and human societies from the detrimental effects arising from carrying out that process using the standard format as well as technology that also takes into account animal welfare, such that this type of agriculture will enable us to produce healthy foods without compromise (Bahlai et al., 2010; Muller et al., 2017, and Palmgren et al., 2015).

The Future of Sustainable Agriculture

The adoption of sustainable agriculture was made to raise awareness of their significance and to support the governments of plantations and businesses that operate within the parameters of sustainability, in particular organic agriculture, which is clean and recently devoted a lot of studies and research as well as major scientific conferences on sustainable agriculture, as were a lot of major exhibitions for organic goods and food made from organic ingredients around the world. Specifically, the potential role that organic agriculture could play in reducing the adverse effects of climate change, reducing deforestation rates, maintaining biological risk, and also arranging the steady increase in the world’s population, attracted attention to the level of international policy.

A wide variety of fungal and bacterial pathogens cause postharvest disease in fruits and vegetables. Some of these infect produce before harvest and then remain quiescent until conditions are more favourable for disease development after harvest. Other pathogens infect produce during and after harvest through surface injuries. In the development of strategies for postharvest disease control, it is imperative to take a step back and consider the production and postharvest handling systems in their entirety. Traditionally fungicides have played a central role in postharvest disease control. However, trends towards reduced chemical usage in horticulture are forcing the development of new strategies. Controlling or reducing disease relies on integrated crop and postharvest management, with attention to fungicide application, crop hygiene and nutrition, and the management of ripening, to optimise advantages conferred by the plant’s natural resistance factors that prevent and delay disease development. Agricultural production and food distribution systems have evolved over many years to a complex system which allows for nearly year-round supply of most fresh commodities through longterm storage and long distance shipments to consumers. The expectation of year round supplies has resulted in increased challenges for postharvest handling systems. The availability of fungicides for disease management likely played a major role in the evolution of our current system of food distribution (Mitcham, 1999). With the recent loss of registration of many postharvestfungicides and more expected under the Food Quality Protection Act (FQPA), as well as consumer pressure to reduce the amount of chemicals used on food, the challenge to maintain our current system of food distribution increases.

Postharvest diseases caused by fungal pathogens are more numerous than those due to bacterial pathogens. Infection by these pathogens may be initiated in the field before harvest, during transit or storage. These pathogens may remain dormant and become active, when the physiological conditions of the produce and environmental conditions become favourable. Symptoms characteristic of the diseases are observed as the produce age or ripen.

INTRODUCTION

Plants are susceptible to different types of pathogens, which are responsible for production of varied symptoms and causing losses. In the absence of the crops pathogens perpetuates in different manners and survival in the soil is one of the most important amongst these. Because of the constant presence of the pathogen in the soil, these become more destructive. These may reduce the plant growth, results in rotting of different plant parts, reduce yield or may cause the death of the plant. The destructiveness of soil borne pathogen increases because of the ability to survive in the soil as dormant structures for several years. Efficient control of soil borne diseases is thus difficult but can be achieved by employing various disease management practices in an integrated manner (Verma and Varma, 1992; Gupta, 1996, Gupta and Sharma, 1999).

Introduction

Many insets inhabit the soil and participate in different activities which will result in changes in soil physico-chemical properties. Thus soil is a very good habitat for some insects. Several insects spend either complete or few stages of their life cycle in soil. Soil provides protection from predators for many soil dwelling insects especially in immature stages. Few insects also undergo diapauses in soil. Soil insects include phytophagous, scavengers, predators and parasites. Among these, soil macro fauna especially termites and white grubs are very important pests of many crops and their activity also brings many changes in soil ecosystem.

Termites

Termites (Order: Isoptera) are eusocial, polymorphic and live in small to large colonies. The colony consists of different castes viz., functional reproductive (queen and king), sterile workers and soldiers, which are morphologically distinct.  The tasks of the latter two castes include foraging, nest building and care of eggs and young ones and defense. All species maintain symbiotic relationships with microorganisms, which aid in digestion. Few species build the often-spectacular mounds or arboreal nests and others build subterranean nests. They constitute important group of soil fauna and play a major role in the arid and semiarid tropics. Worker castes are dominant and are responsible for major functions in the colony. During the process of food collection, the workers generally attack the plants that are weakened due to some internal growth factors or environmental causes such as drought or poor soil conditions (Roonwal, 1978).

Among the microbial pathogens, viral and phytoplasmal pathogens primarily depend on various vector species for their spread from infected plants to healthy plants in the same or distant locations. Hence, management of these diseases depends on the reduction of vector populations, in addition to the disease management strategies applicable to diseases caused by fungal and bacterial pathogens that are not transmitted by vectors.

19.1 Diseases caused by Viruses

Plant viruses are transmitted through seeds, propagative plant materials and vectors such as mites, insects, nematodes and fungi. Hence, the strategies to manage these diseases vary depending on the nature of vectors involved in the transmission of viruses.

3.1. Definition

Systems approach to reduce nematode to tolerable levels through predators and parasites, genetically resistant hosts, natural environmental modifications and appropriate nematicides.

1. INTRODUCTION

Integrated Nutrient Management (INM) has become a widely practiced Hi-tech horticulture practice. It refers to maintenance of soil fertility and plant nutrient supply to an optimum level for sustaining the desired crop productivity through optimization of the benefits from all possible sources of plant nutrients in an integrated manner. Another important aspect of INM is for enhancing of the fertilizer use efficiency (FUE) by proper placement of fertilizer in close proximity to the rhizosphere of the highest root activity. Today, Integrated Nutrient Management has become one of the common practices among progressive horticulture producers.

INM involves proper combination of chemical fertilizers, organic manures, crop residues, nitrogen fixing crops and bio-fertilizers suitable to the system of land use under ecological, social and economic conditions. INM involves maintenance or adjustment of plant nutrient supply to an optimum level for sustaining the desired crop productivity.

Today a number of countries have moved away from the inorganic or chemicalised farming to organic farming yet it is not possible for India to depend entirely upon this system of farming due to increase in human population. As total availability of plant nutrients from different organic sources is projected to 7.75 MT by 2025 against the total requirement of 37.50 MT for 1504 million populations, so it means if we depend on organic sources there would be deficiency of about 30 million tonnes of nutrients.

Protected cultivation of horticultural crops offers the best choice for diversification from traditional agriculture production system for a number of reasons. Production of crops under protected structures has great potential in augmenting production and quality of vegetables, flowers and in some fruit crops in main and off-season and maximizing water and nutrient use efficiency under varied agro-climatic conditions of the country. This becomes relevant to growers in India who have small land holding. They would be interested in a technology, which helps them to produce more crops each year from their land, particularly during off-season when prices are higher. The commonly protected structures are polyhouses, poly-tunnels, floating row covers, clotches, shade-net, insect-proof net and plastic-mulches (Chandra et al., 2000 ; Singh et al. 2010). These protected structures act as physical barrier and play a key role in integrated pest management by preventing spread of insect-pests and viruses which causes severe damage to the crop (Singh et al., 2003). This technology has great potential especially in periurban agriculture in near future, since it can be profitably used for growing high value vegetable crops like tomato, cheery-tomato, coloured peppers, parthenocarpic cucumbers, cut-flowers like rose, carnation, Berbera, lilium and fruits like strawberry, grapes etc. and for off-season cultivation of vegetables and their healthy and virus-free seedling production.

Protected cultivation is intended to mean some level of control over plant micro-climate to alleviate one or more of abiotic stresses for optimum plant growth. The microclimatic parameters being referred here are temperature, light, air-composition and the nature of rooting medium.

1. Introduction

India is known as seed spices hub because as far as International level of concern, our country is the largest producer, consumer and exporter of seed spices. Seed spices contribute about 51.79 % of total area and 19.06 % of production of total spices in the country. The area under seed spices is about 1.74 million hectare and production is about 1.45 million tons (Lal, 2018). In our national economy, seed spices are play an important role, the demand is increasing not only due to its large domestic consumption, but also for export. Since long, huge demand of seed spices and importing countries in global market look at India for quality produce of seed spices. The ISO has been listed a total of 109 spices, out of which 63 spices are being grown in India and 20 spices are being classified as seed spices. 

Introduction

The Indian hot arid zone occupies an area of 0.32 million km to forming a continuous stretch in the north western states of Rajasthan, Gujarat, Punjab, Haryana and scattered land masses in the states of Maharashtra, Karnataka and Andhra Pradesh, 70 per cent of it falls in western Rajasthan. Low and erratic rainfall, extreme temperatures, long sunshine duration (6.6-10 hours), low relative humidity (30-80 per cent), high wind velocity (9-13 km/h) and high evapo transpiration (1600-1800 mm) and characteristic features of the region. Moreover the soils are poor in nutrients and scarcity of water and recurring droughts are perennial constraints. Despite hostile conditions, the western arid Rajasthan supports a large human and livestock population and a variety of flora and fauna. However, the ever increasing human and livestock population and development activities exert enormous pressure on the natural resource in the region. These areas experience an annual rainfall between 100 and 500 mm with a coefficient of variation varying from 40 to 70%. The region is characterized by low and erratic rainfall with extremes of temperature (1–48 °C), high wind velocity and sandy soils. In dry and arid region, wind erosion affects 13.5% in India (Sehgal et al., 1994, Kar et al.,1959). Wind erosion is very active in the Indian Thar Desert and poses severe multifaceted problems (Dey et al., 2016). Loss of nutrient-rich particles from agricultural fields has been occurring due to suspension of fine particles in air and deposition of eroded soil. Among terrain properties, soil aggregate distribution, surface roughness, soil moisture and vegetation cover are important factors influencing wind erosion. Indiscriminate grazing in the region also further destroys vegetation and exposes the land surface, thus making it more vulnerable to wind erosion.

All the states have some area under irrigation. Thus the term ‘irrigated ecosystem’is rather loosely defined, and the states having distinctly large net irrigated area may constitute this ecosystem. Two such areas can be easily carved out i.e., Indo-Gangetic Plain region representing five states namely Punjab, Haryana, U.P., Bihar and West Bengal, and coastal areas of two southern states i.e., A.P and Tamil Nadu. About 56% of the net irrigated area of the country exists in these states, and the cropping intensity is also much higher (144%) as against national average of 132%. With demographic viewpoint also, these areas are densely populated. Of late agriculture in this ecosystem has become unsustainable owing to over-exploitation of natural resources. Studies have conclusively established the superiority and worth of integrated nutrient management in restoration of soil health and sustenance of crop productivity and profits.

The basic concept underlying the principles of integrated nutrient management (INM) is the maintenance, and possibly improvement, of soil fertility for sustaining crop productivity on long-term basis. This may be achieved through combined use of all possible sources of nutrients and their scientific management for optimum growth, yield and quality of different crops and cropping systems. INM is not a new concept, but an age-old practice. Its importance was, however, not realized earlier due to low nutrient turn over in soil-plant system and almost all the nutrient needs were met through organic sources, which supplied secondary and micronutrients also besides major nutrients. INM has now assumed great significance mainly because of two reasons. First, the need for continued increase in agricultural production based on increase in per hectare yields requires growing application of nutrients, and the present level of fertiliser production in india is not enough to meet the total plant nutrient requirement. Second, the results of a large number of experiments on manures and fertilisers conducted in india and other countries reveal that neither the chemical fertilisers alone nor the organic sources exclusively can achieve the production sustainability under intensive cropping systems (Hegde and Dwivedi, 1993). Even the so called balanced use of chemical fertilisers would not be able to sustain high productivity due to emergence ofthe deficiencyofone ormore ofthe secondaryandmicronutrients (Swarup and Wanjari, 2000). The interactive advantages of combining organic and inorganic sources of nutrients in INM have proved superior to the use of its each component separately. The advantages of INM can be broadly enumerated as following:

Introduction

The term “Integrated Nutrient Management” refers to the process of ensuring that the fertility of the soil and the delivery of plant nutrients are kept at an optimal level in order to maintain the desired level of production. This is accomplished by using an integrated approach to maximize the advantages that may be obtained from all conceivable sources of organic, inorganic, and biological components. Due to the fact that it supplies plants with anchoring, water, and nutrients, soil is an essential component for crop development. It is common for soils to have a certain amount of organic and mineral nutrient sources; but, in order to improve plant development, it is often necessary to supplement these soils with external treatments, sometimes known as fertilisers. It is common practice to apply fertilizers in order to boost the fertility of the soil, encourage the development of plants, increase crop yields, and provide support for agricultural intensification. Generally speaking, fertilizers may be categorized as either organic or mineral. Manure, compost, seaweed, and cereal straw are all examples of organic fertilizers. Organic fertilizers are created from components that are either plant or animal based. In general, organic fertilizers have lower amounts of plant nutrients because they are coupled with organic matter, which enhances the soil’s physical and biological features. This results in the soil having better qualities. Mineral fertilizers that are based on nitrogen, potassium, and phosphate are the ones that are used the most often. According to the International Food Policy Research Institute (1995), in order to satisfy the ever-increasing demand for food throughout the world, it will be of the utmost significance to make the most efficient and well-balanced use of nutrient inputs from mineral fertilizers. Since 1960, the usage of mineral fertilizer has expanded by approximately fivefold, which has greatly supported the expansion of the world population. According to Smil (2002), nitrogen-based fertilizer has contributed an estimated forty percent to the gains in per-capita food production over the previous fifty years. In spite of this, mineral fertilizers should not be the only means by which crop nutrient needs are satisfied. This is because environmental issues and economic limits make this situation impossible. As a result, Integrated Nutrient Management has to be used in order to encourage the efficient utilization of all nutrient sources, which includes organic sources, recyclable wastes, mineral fertilizers, and biofertilizers (Roy et al, 2006).

Various studies have demonstrated that the cashew tree responds to the application of mineral nutrients, though the responses are significantly affected by plant age, the genotype utilized, the conditions of cultivation, soil and climate and of the crop management (Barros et al., 1984; Ghosh, 1990; Ximenes, 1995; Bezerra et al., 1999; Crisóstomo et al., 2005). The crop develops well under semi-arid conditions, in which the problems associated with water availability and salt excess in the root environment are common. These two factors interfere with the acquisition of nutrients, in that the levels of nutrients in the plants are affected both by direct effects on absorption and transportation processes and by indirect effects associated with a reduction of growth of the various plant organs including the root system. The effect of salinity on plant nutrition depends on the types of salts that predominate in the cultivation environment which can result in a deficiency of essential nutrients and an excess of toxic ions. These changes under salt stress are accompanied by a loss of structural and functional integrity of the cellular membranes, a reduction in activity of various vital enzymes, and a diminished capacity of the roots to absorb nutrients (Zhu, 2001). On the other hand, water deficit reduces the extraction of nutrients from the soil, limiting the solubilization of nutrients in the root environment and altering the morphology of the root system (Kramer and Boyer, 1995). It should be added that the effects of excess salt and water deficit depend on various factors, including the species under study and the stage of development at which the plants are submitted to these.

Integrated plant nutrition system conceptualized by food and agriculture organization is the maintenance or adjustment of soil fertility and of plant nutrient supply to an optimum level for sustaining the desired productivity through optimization of benefits from all possible sources of plant nutrients viz. organic manures, fertilizers, crop residues, compost or nitrogen fixing crops etc. in an integrated manner.

Introduction

Fruits are an essential component of the human diet, and India holds the position of the second-largest fruit producer worldwide. The nation’s agricultural sector produces banana, papaya, and mango, contributing approximately 13% of the global fruit production. Nevertheless, the present fruit output in India falls short of satisfying 46% of the total demand. Fruits provide a substantial amount of vitamins and minerals that are crucial for sustaining good health and immunity. In addition, they include oils, lipids, and proteins that are used in different metabolic processes.

The overutilization of synthetic fertilizers to enhance fruit yield has resulted in problems such as economic inefficiency, ecological degradation, and potential injury to both plants and consumers. This has resulted in significant issues. In order to meet the requirements of plants and enhance productivity, a significant quantity of nutrients must be supplied to the soil. Continual crop production may result in the gradual depletion of nutrient reserves in the soil, which ultimately leads to soil degradation. Due to the exorbitant expense of inorganic fertilizers, there has been a growing focus on using bio-fertilizers and organic matter with inorganic fertilizers. Farmers are now exploring the use of the Integrated Nutrient Management system for cultivating fruit crops. This system incorporates innovative techniques such as deep fertilizer application and urea coatings to enhance plant absorption of nutrients and minimize nutrient wastage. Ultimately, fruits are essential components of human meals, although their over use has resulted in economic inefficiencies, environmental harm, and land deterioration.

Mineral Nutrition and Nutritional Deficiency

The normal green plant is autotrophic that means it can synthesise all its organic substances; provided it is supplied with all the inorganic elements and growth under normal condition. The nutrition of green plant is therefore, solely inorganic. It is, in fact, commonly called mineral nutrition. Element absorbed from the soil by the roots are generally known as Plant nutrition or Mineral nutrients.

Indian horticulture has shown impressive impact on production, productivity and profitability. Currently, the total production of horticultural produce is 214.7 million tones from the 9% of total cultivated area in India, which contribute 30.4% to GDP of agriculture (Singh, 2010). In world perspective, India is second largest producer of fruits (68.5 mt) from 6.10 m ha area and contributes 11.2% in global fruit production. Vegetable crops occupying 8.0 m ha have the production of 129.1 mt (Table 1). However; India is the largest producer, consumer and exporter of spices and spice products in the world and produce more than 50 spices. The spice production in India is the order of 4.14 mt from an area of about 2.63 m ha. India is also the leading producer of plantation crops in the world and contributes 22.34% in coconut, 25% in cashewnut and 55% in arcanut. Commercial floriculture sector has recorded fast pace of growth during the last decade. During the last decade area under floriculture has expended to 1,67,000 ha with production of 9,87,000 MT of loose flower and 4.8 million cut flowers (Singh, 2010). The over all percent share of fruits and vegetables to their total production and contribution of different states for production of fruits and vegetables are repicted in Fig. 1 & 2. From the above fact, it is indicated that the production of horticulture produce has increased manifold but the gap in demand and supply continues simultaneously and is hardly sufficient and meets only 46% of national demand. Hence, there is a strong need to increase the production and productivity through crop diversification.

Oilseeds serve as rich source of food, feed, energy, employment and commerce. The productivity of oilseeds in India (1006 kg ha^-1 during 200809) is very low when compared with the world productivity (1878 kg ha^-1 during 2008). The oilseeds production in the country often sufers from a high degree of variation in annual production owing to their predominant cultivation under low and uncertain rainfall situations which is further handicapped by input starved conditions with poor crop management. Nutrient and water are the key inputs for crop production. Improving efficiency and factor productivity under complexities of diminishing quality resources and increasing ecoawareness are critical for sustainable oilseeds production.

The vegetable oils consumption in the country is steadily rising and has sharply increased in the last couple of years touching around 14.1 kg head^-1 year^-1 during 2009-10. As per DAC-Rabo Bank, India’s per capita consumption is likely to reach at least 16.38 kg year^-1 by2020 and for a projected population of 1331 million, vegetable oil requirement will be 21.8 million tonnes. This is equivalent to about 66 million tonnes of oilseeds assuming that there is no change in the proportion of different oilseeds produced in the country in the next ten years. Assuming about 20% of vegetable oils contribution from sources like ricebran, cotton seed, coconut, oilpalm, etc., still the country needs to produce about 55 million tonnes of oilseeds by 2020. Considering that the oilseeds production during 2008-09 was just 27.56 million tonnes, the country needs to double oilseeds production in next 10 years requiring a growth rate in excess of 6%