eChapters

What is keratinocyte?

The epidermal layer consists of keratinocytes, melanocytes, Langerhans cells, and Merkel cells. Their major function is to produce Keratinocytes which are the most abundant cells in the epidermis, keratin protein. Keratinocyte synthesizes major structural components of the epidermal barrier through a programmed process of differentiation. They are present in the innermost layer of the epidermis (Eckert et al?, 1989). The epidermis is composed of several layers, stratum corneum (horny layer), stratum lucidum (clear layer), stratum granulosum (granular layer), stratum spinosum (prickle cell layer), and stratum basale (basal layer), from the outermost to the deepest layer respectively. The process of maturation and movement of the keratinocytes from the stratum basale to the stratum corneum is what we call epidermal differentiation.

Procedures for isolation of canine karatinocytes

When studying skin cells, isolating keratinocytes from tissue samples, such as skin biopsies, is a critical initial step. Here is a general guide on how to isolate keratinocytes:

What is primary cell culture?

In vitro culture of cells freshly obtained from the tissue is called primary cell culture. Unlike that of cell line, primary cell culture grows for a limited period of time. Examples, are primary mammary epithelial cells, primary hepatocyte culture.

Aim: To prepare the primary cell culture from chicken embryos.

Materials required for the primary cell culture

• 70% alcohol

• Cotton swabs

• Small beaker 20-50 ml

• Forceps

• Straight and required curved,

• 9 cm Petri dishes

• 11 day embryonated eggs

• Balanced Salt solution (BSS)

• 250 ml conical flask

• Magnetic centrifuge tubes

• Haemocytometer

• Growth medium with serum

• Culture flasks

4.1 From Soil

Soil contains varied group of microorganisms such as fungi, bacteria, actinomycetes, algae and protozoa. The type of nutrients available, moisture, temperature and pH of the soil determine the nature of microbial population in soil. Different laboratory techniques for isolation of microorganisms have been detailed in chapter-III. These are used in particular for the isolation of specific type of microorganisms. All the techniques adopted are just to segregate the pathogens/ microorganisms from the mixture of microbial population present in nature.

(a) Isolation of Fungi

Soil contains large number of fungi and constitutes a major place of microbial population. They can be isolated in pure form by following the methods given below:

Introduction

Yeast contain a hard cell wall. Spheroplasts are yeast cells where the cell wall has been enzymatically degraded. These spheroplasts are very fragile so we must be careful with them. Once we have spheroplasts it will be very easy to lyse the yeast cells and quickly release the RNA and proteins in the cell into a controlled environment where we can temporarly keep the cellular RNases from degrading the RNA. We don’t want to lyse the cells before they are in this controlled environment.

Growth of Yeast Cultures

Cultures of wild-type and yeast containing various mutations will be grown up the day of the experiment. Each section will be given one wild type yeast culture and a culture containing one of the mutant varieties that we have discussed in class.

Yeast are grown very similarly to bacteria. Like bacteria, they have different stages of growth. Scientists divide these stages of growth into early-log phase, mid log-phase, late log-phase, and the stationary phase. These phases are based on the amount of yeast that are around in the broth and how quickly they are able to grow and divide based on nutrient use. Reading the absorbance of the sample at 600 nm is a way in which you can determine what phase of the yeast growth series you are in and how many cells you have.

Haploid yeast cells contain approximatley 1.2 pg of RNA per cell

Predict approximatly how much RNA you should isolate

Introduction

Studies on biocontrol agents have revealed the presence of a diverse range of antifungal metabolites derived from amino acid, polyketones and isoprenoid biosynthetic pathways, each of which has distinctive regulatory points and is subjected to different stimuli within organisms. In this experiment, the extraction of secondary metabolites from the culture of T. viride and Chaetomium globosum will be demonstrated.

RNA is transcriptional product of DNA. The total RNA includes three classes, rRNA, tRNA and mRNA. The ribonucleic acids exists as ribonucleo protein particles in intact cells. The ribonucleo protein complex is dissociated by SDS in to RNA and protein deproutinised by phenol and the free RNA left in the aqueous solution is precipitated in cold by adding alcohol. 

Introduction

Rhizobia are Gram-negative soil bacteria , aerobic nitrogen fixers and adhere to the roots of leguminous plants. Fixed nitrogen is assimilated to proteins and is transported along the plants. A part of proteins is also released in rhizosphere region.

Requirements

1. Yeast Extract Mannitol Agar (YEMA)
2. Sterile saline
3. HgCl₂ solution (1%)
4. Ethanol (70%)
5. Root nodules of Mung bean
6. Water blanks
7. Pipettes
8. Petri plates
9. BOD Incubator

Under natural habitats microorganisms usually grow in mixed populations containing several species. This is really a problem for microbiologists because a single type of microorganism can not be studied adequately in a mixed culture. In laboratories these populations can be separated into pure cultures. The pure cultures contain only one type of organism and are thus suitable for studying the cultural, morphological and biochemical characters of an individual species. In the present days there are several ways of developing pure cultures in laboratories. Some of which are as follows:

Introduction
In order to study the cultural, morphological and physiological characteristics of an individual species, a pure culture of the microorganisms is required. Several different methods of separating the microorganisms from a mixed culture are available. The two most frequently used methods involve making a pour plate and/or streak plate. Isolated colonies are obtained from individual organisms after incubation.
Streak Plate Method
Plating is generally applied to the inoculation of a medium in petridish. Streak plate method is best for the separation of organisms from a mixed culture. In this method, agar medium is allowed to solidify as a thin layer in a petri dish and culture is streaked on the surface of agar medium and allowed to incubate to get isolated colonies.
Materials
1. Sterile petri plate
2. Wire loop
3. Nutrient agar medium
4. Bunsen burner
5. Mixed culture of E.coli and Micrococcus leutus

Isolation of fungal pathogens

a. From leaves

•Choose leaves with young lesions.

•The lesions along with some healthy portion are cut in small pieces.

•The leaf portion is surface sterilized with 0.1% HgCl₂ for 10-15 seconds and washed with sterilized water 4-6 times.

•After washing, infected leaf pieces are placed on PDA plates with a sterilized forcep.

•After two days of incubation at optimum temperature, bits of mycelium from the margins of leaf pieces are transferred to fresh PDA slants.

•In certain cases the leaves are incubated in moist chamber and growth

•from infected portion is transferred directly to culture media.

Introduction

This method can be scaled to yield amounts of DNA ranging from less than ten to more than hundreds of micrograms of DNA. However, shearing forces are generated at every step, with the result that the DNA molecules in the final preparation rarely exceed 100-150 kb in length. DNA of this size is adequate for Southern analysis on standard agarose gels, as a template in Polymerase chain reactions (PCRs), and the construction of genomic DNA libraries in bacteriophage Lambda vectors.

Principle

The method described in protocol involves digesting eukaryotic cells or tissues with proteinase K in the presence of EDTA (to sequester divalent cations and thereby inhibit DNases) and solubilizing membranes and denaturing proteins with a detergent such as SDS. The nucleic acids are then purified by phase extractions (isopropanol). Contaminating RNA is eliminated by digestion with an RNase, and low molecular-weight substances are removed by dialysis (or centrifugation).

ABSTRACT

Amajor goal of plant biotechnology is to develop effective and lasting means to reduce crop losses due to stress caused by biological organisms. In Indian context, fungal diseases are rated as the most important factor contributing to yield losses. Although, conventional programmes towards development of disease resistant cultivars have been successful , they suf fer from limitations of human health consequences, potential degradation of environment etc. In this scenario, introduction of specific genes encoding for disease resistance through genetic engineering seems to be a viable alternative. Among the various genes that are induced in response to plant defense, chitinases are the most widely studied and used for development of transgenic crops. Keeping this in view, attempt was made to isolate chitinase genes from four fungal species viz., Trichoderma harzianum, Metarhizum anisopliae, Nomuraea rileyi and Alternaria solani by designing primers based on sequence information available in the database. RT-PCR was done using the RNA isolated from the fungal species using the designed primers. Amplified products were eluted, cloned into pTZ57R vector and sequenced. Characterization of sequenced cDNA was done using the BLAST (x) programme of NCBI site. The amplified product (261 bp) from T. harzianum showed 90 per cent homology to endochitinases from T. asperellum and T. viridae. Using this cDNA, full-length chitinase gene of 1556 bp from T. harzianum could be accomplished through RACE (Rapid amplification of cDNA Ends). In M. anisopliae the amplified product of 1500 bp matched the full length gene of 1500 bp and showed 99 per cent homology to M. anisopliae and 96 per cent homology to M. flavoviride. In other two fungal species, viz., Nomuraea rileyi and Alternaria solani, the amplified products did not show any homology to chitinase gene

Mesenchymal stem cells are multipotential cells capable of proliferation and differentiation into osteogenic, chondrogenic and adipogenic lineages both in vitro and in vivo. Minimal criteria for defining MSC according to International Society of Cell Therapy (ISCT) are (a) they must be plastic-adherent when maintained in a standard culture conditions, (b) MSC must express some surface antigen such as CD105, CD73, CD90, CD44 and must not express CD34, CD45, CD 14, CD19, and HLA-DR, and (c) MSC must differentiate in vitro into osteoblast, adipocytes and chondrocytes under specific differentiating condition.

Although traditionally MSC isolated from bone marrow, more recent reports have detailed the isolation of cells with MSC characteristics from a variety of tissues including umbilical cord blood, chorionic villi of the placenta, Wharton’s jelly, peripheral blood, fetal liver and lung, adipose tissue, skeletal muscle, periosteum, deciduous teeth, amniotic fluid, dental pulp, testis, synovium and the circulatory system. Bone marrow and periosteum sources are richest in young animals with their numbers diminishing, but still present in old age. It is estimated that MSCs represent approximately only 0.01 to 0.001% of the total nucleated cells within isolated bone marrow aspirate. The yield of MSCs from bone marrow varies from species to species. e.g., Canine =1 in 2.5 × 10⁴; Feline =1 in 3.8 × 10⁵; Murine =1 in 10.8 ×10³ to 1 in 3.45×10⁴ and Horses =1 in 4.2 × 10³. Despite this low number, they are remains a great interest, as they can be easily isolated from a small aspirate and culture-expanded through as many as 40 population doublings to significant numbers in about 8 to 10 weeks.

Mesenchymal stem cells are multipotential cells capable of proliferation and differentiation into chondrogenic, osteogenic and adipogenic lineages. Minimal criteria for defining MSC according to International Society of Cell Therapy (ISCT) are (a) they must be plastic-adherent when maintained in standard culture conditions, (b) MSC must express some surface antigens such asCD105, CD73, CD90, CD44 and must not express CD34, CD45, CD 14, CD19, and HLA-DR, and (c) MSC must differentiate in vitro into osteoblast, adipocytes and chondrocytes under specific differentiating condition. 
Although MSC is traditionally isolated from bone marrow, more recent reports have detailed the isolation of cells with MSC characteristics from a variety of tissues including umbilical cord blood, chorionic villi of the placenta, Wharton’s jelly, peripheral blood, fetal liver and lung, adipose tissue, skeletal muscle, periosteum, deciduous teeth, amniotic fluid and synovium. Bone marrow and periosteum sources are richest in young animals with their numbers diminishing, but still present in old age. One of the attractive advantage of bone marrow derived mesenchymal stem cells (BM-MSCs) as a source of cell transplantation is their low immunogenecity. Recently, several studies have reported that BM-MSCs may be immune-privileged cells that do not elicit immune response due to an absence of their immunologically relevant cell surface markers. BM-MSCs also are known to inhibit proliferation of T lymphocytes, B lymphocytes, dendritic cells and natural killer cells.

What is DNA

DNA is a simple molecule

DNA is negatively charged

DNA has lots of ring structures; ring structures are generally quite hydrophobic.

DNA is a very robust molecule.

DNA work has lots of toys.

Although it can be argued that due to its overall trendiness, they have been a lot of recent developments in making it more fun to work with. As a molecule, it is very similar to DNA (the most notable chemical difference is its flexibility), but suffers because the nucleases (RNases) that can destroy it are notoriously very stable and very difficult to get rid of.

Plasmid is a double stranded, self replicating, circular extra chromosomal DNA of bacterium. It is used in recombinant DNA experiments to clone genes from other organisms and make large quantities of their DNA. Plasmid can be transferred between same species or between different species. The sizes of plasmids range from 1-1000 kbps. Plasmids are part of mobilomes (total of all mobile genetic elements in a genome) like transposons or prophages and are associated with conjugation.

There are various methods available for isolation of high molecular weight genomic DNA from plants. The basic steps involved in all these methods are removal of cell wall, nuclear membrane, proteins, lipids, carbohydrates, cell debris, RNA without affecting the integrity of DNA. The two major factors that affect DNA integrity are action of endogenous nucleases and impact of mechanical shearing.

After precipitation, run-off and surface water storage in lakes and man-made reservoirs, the next steps in the hydrological cycle are infiltration through the unsaturated zone and groundwater dynamics in the saturated zone. Well-established applications of isotopes in groundwater hydrology are

The range of isotope applications in surface water hydrology is not as wide as in groundwater hydrology as the surface waters are more easily amenable to conventional hydrological methods. Following are the areas in which isotopes have a significant role in either improving the accuracy of measurements or in providing additional information, which is otherwise not easily available.