eChapters

Meat and meat products industry is a sunrise industry in India having huge potential for upliftment of agricultural economy. India is the second largest food producer in world but the contribution of meat industry is still confined to localized handlers. So to uplift industry basic infrastructure, food chains, food security and safety along with standards and laws formulation and their implementations is today’s need. Standards are carefully drawn specifications with respect to a food product. These standards are mainly of three types i.e. government, trade and research standards. Government standards are formulated by the government of India or state government and also have the power to implement these standards while trade standards are implied by the individual company. Research standards are formulated on the basis of comparative study of the products by the researchers. Laws are the legislations enforced by the organisations either government or by autonomous bodies made under the constitutional acts of the country. At present numerous standards and laws are in existence in individual country or at international level. The need is to harmonize them as per the industry and trade requirement.

Domestic Organizations Involved in Standards and Laws Formulation

For the formulation, enforcement and control of standards and legislations at domestic level various organizations are of prime value. Some of these are:

In production one or a combination of the following relationship are commonly observed:

1. The law of constant marginal returns (productivity)

 2. The law of increasing marginal returns (productivity)

 3. The law of decreasing marginal returns (productivity)

17.1 Introduction

The plant layout needs a proper arrangement of each constituent area, along with their interrelationship. One of the most important considerations is the future expansion potential. The plant layout design should permit expansion readily and economically. One side of the building should be free of permanent installations such as compressors, septic tanks, toilets, drain fields, offices, and loading docks to permit the addition of building units without relocating these auxiliary facilities.

Facilities required for buffalo, sheep and goat slaughterhouses
1. Lairage
2. Large enough slaughterhouse area-
• Separate area for pig slaughtering
• Slaughter line and area for operations such as singeing, depilation, scraping should be demarcated by a high wall of at least 3 m high or by an open space of 5 m width
3. For stomachs and intestines emptying and cleaning, there should be one dedicated room
4. Separate rooms for handling guts and tripe
5. Fat and hides, hooves and horns should be stored in separate rooms
6. Accommodation for sick or suspected animals; detained meat or seized meat
7. Chilling/refrigeration room
8. Room for veterinary services
9. Provisions for lavatories, wash basins, changing rooms, and showers
10. Facilities for veterinary inspection
11. Entry and exit of slaughterhouse should have control mechanism
12. Separation of clean and unclean area
13. Waterproof flooring of room where meat is processed
14. Provision for steam exhaustion and sufficient ventilation
15. Sufficient artificial or natural lighting
16. Adequate potable water supply
17. Adequate hot potable water supply
18. Effluent treatment plant (ETP)

Animal protein has a great importance in human health by providing essential amino acids. It is supplied by the milk, meat, fish, eggs etc. Specifically meat has a prime position in the human’s diet particularly for those who are non- vegetarians. As per Indian Council of Medical Research (ICMR) recommendations a normal human being requires 60 gram protein in a day with the net protein utilization (NPU) of 65. In ideal cases 30 to 50 percent of daily protein intake should be from animal sources to get optimal range of amino acids. In present scenario human beings all over the globe are getting 29 gram of protein while developing countries have 15 g per day availability and developed nations are getting 60 grams protein per day per head. However, in India availability of protein is only 10 grams/day/head.

2.1 Introduction
Typically, milk is obtained from domesticated animals (water buffalo, sheep, or goats) under farm-level circumstances. In smaller amounts, it can be utilized directly after boiling; but, in larger quantities, processing and storage are crucial. Farms provide their milk to milk vendors, who collect it in cans and deliver it to chilling centers or dairy processing plants. After milking, the milk is quickly chilled to 4°C, or it should be pasteurized and packaged within two hours. Before being marketed, milk must be pasteurized, with the exception of products that initially require raw milk or those that require direct application of heat, such as desiccation or another heating process. The market for novel goods and procedures is steadily growing. The main causes include rising disposable incomes, shifting consumer attitudes and concerns about safety, hygiene, and nutrition, and the entry of foreign companies.

2.2 Dairy plant requirements
The plant should be situated in an area free from waterlogging, well- protected, easily accessible by car, and equipped with a plentiful supply of drinkable water, a facility for disposing of waste, and energy.

2.2.1 Infrastructure requirements
For the receiving of milk, chilling, storing, separating, pasteurizing, homogenizing, packaging, and product manufacturing, civil works with appropriate space and machinery are needed. provisions for utility units such steam generation and refrigeration control, storage, and quality control. When choosing metals for equipment in dairy plants, look for materials that are nontoxic, tainting, corrosion-resistant, easy to clean, affordable, and long-lasting. Generally, alloys made of aluminum or 18:8 stainless steel are recommended.

The plan reviewing the arrangement of fruit plants in an orchard is known as the orchard layout. Although several systems of planting are followed to increase the production of orchard, selection of root stocks, soil, system of training pruning and cultivars are very important factor influencing designing of layout. However, improper system results in overlapping of plant parts, competition for water, light, nutrient and unequal distribution of water etc., which ultimately results in poor performance or fruit orchard.

Layout plan

The marking of position of the plant in the field is referred as layout. The layout plan of the orchard should be prepared carefully, preferably in consultation with horticultural experts or fruit scientists. The orchard layout plan includes the system of planning provision for orchard paths, roads, water channels and farm building. A sketch of the proposed orchard should be prepared before the actual planting is taken up.

Objectives

1. To know the layout methods.
2. To know the planting techniques of various spices and condiments.

Layout: Systematic arrangements of plants

Some spices and condiments just like clove, cardamom is perennial in nature. Being perennial in nature any mistake committed during initial year, on the part of planning, is hard to rectify. Hence, all the factors having bearing on growth, production and overall performance of the plant should be given top priority.

Systems of planting

1. Square system: In this system row to row distance and plant to plant distance is kept similar.

Formation of a Rectangle

Experiments are usually laid out in square or rectangular plots for data and yield estimation, even though the field may be irregular. The plot is usually placed on the contour, parallel with a road, or in a north-and-south alignment. To mark a plot, construct a right angle and then form a rectangle or square.

What is Nursery?

Nursery is a place, where seedlings, samplings, trees and other plant material are grown and maintained until they are planted in permanent place. Setting up of a horticultural nursery is a long term venture and needs proper planning for good return.

Establishment of Nursery

To be a viable venture, the nursery should be established in such an area where cultivation of fruit crops is on sizeable area and there is need for a nursery, having demand for saplings. In such area/region, following considerations need to be observed for selecting an appropriate location.

The tissue/cell culture lab has the requirement of maintaining an aseptic environment. There are several aspects to the design of good tissue culture facilities. Ideally, cell culture work should be conducted in a single-use facility. Therefore, cell culture lab unit should be separated from the rest of the lab area. It can be either separate lab or a closed partition in a big lab. All new material should be handled as ‘quarantine’ material in a separate area, and materials known to be free of contaminants should only be allowed inside the culture room. In addition, the work surfaces should be thoroughly cleaned and disinfected between activities.

For most of the work involving non-infectious primary culture and cell lines, the laboratory should be designated to at least BSL2 facility. The location of the Biosafety cabinet is the most important point to consider. When operated correctly, the cabinet will provide a clean working environment, whilst protecting the operator from aerosols. Environmental monitoring with Tryptone Soy Broth agar settle plates inside the biosafety cabinet is a good indicator of the cleanliness of a cabinet. There should be no growth of bacteria and fungi after 3-5 days of incubation.

4.1. Area approach

National Credit Council was set up in December, 1967

Study group in October, 1968 under chairmanship of Prof. D R Gadgil found that Commercial Banks had penetrated only 5000 villages as of June, 1967 and its share was 1% compared to co-operatives.

Recommended the adoption of an area approach for bridging the spatial and structural credit gaps.

All India Rural Credit Review Committee 1969 also endorsed the view the Commercial Banks should increasingly came forward to finance activities in rural areas.

RBI accepted recommendation and formulated Lead Bank Scheme (LBS) in December, 1969

Each district had been assigned to different banks (Public and private) to act as a consortium leader to coordinate branch expansion and credit planning.

Nationalization of 14 major Commercial Banks in July 1969 (Another 6 banks in 1980), paved the way for branch expansion network in unbanked rural and semi urban areas.

Introduction

In recent years, women have made remarkable strides in the veterinary field, bringing a wealth of skill and dedication to various sectors, including clinical practice, research, academia, and industry. Today, women comprise a significant portion of the veterinary workforce. However, the path to leadership and career advancement still presents unique challenges. Gender biases, limited representation in senior roles, and the constant balancing act between personal and professional life often stand in the way. As a woman in this field, I understand the significance of leadership development and the impact it has on creating a meaningful, rewarding career. This session aims to equip women veterinarians with actionable strategies and essential leadership skills to advance their careers meaningfully. Leadership is not merely a title; it’s about creating positive change, setting examples, and inspiring those around us. For women in veterinary medicine, it means breaking barriers, making a difference, and contributing to animal welfare and public health. By cultivating confidence and a focused approach, women can rise to leadership roles that truly make an impact.

Abstract

Leadership behavior is seen in every group of social animals like elephant, honey bee, human being, etc. Initially people thought this behavior as inborn character and only few lucky people possessed it. But now it has been proved that this character can be developed by interested people through systematic training. In every family parent are playing the role of either leader or manager and being a role model gradually transmitting this behavior to their children from childhood itself. Training begins at home of every successful leader.  In this article the characteristic features of leaders, style of their functioning, leadership theories and the difference between a leader and a manager are discussed in details. Important tips have been mentioned to follow for becoming a good and successful leader.

Leaf analysis and its importance

Improved fertilizer management for crops is important in view of today’s need to reduce production costs, conserve natural resources, and minimize possible negative environmental impacts. These goals can be achieved through optimum management of the fertilizer applied. Understanding the crop nutrient requirements and using soil testing to predict fertilizer needs are keys to fertilizer management efficiency.

Plant tissue testing is another tool for use in achieving a high degree of precision in fertilizer management. Timely tissue testing can help diagnose suspected nutrient problems or can simply assist in learning more about fertilizer management efficiency. Leaf analysis (also called stem leaf analysis, tissue analysis or foliar analysis) is the most precise method of monitoring plant nutrient levels. While soil analysis reveals the levels of essential soil nutrients, leaf analysis shows the grower exactly what the plant has successfully absorbed. Leaf analysis is especially helpful in detecting nutrient deficiencies before they affect plant health and yield.

1. INTRODUCTION

Leaf and soil analysis are the tools to estimate the fertilizer needs of fruit crops. Leaves are selected for analysis because:

• Leaf is the principal site of plant metabolism.
• The changes in nutrient supply are reflected in the leaf composition.
• The changes are more pronounced at certain stages of development.
• The concentration of nutrients in the leaf at specific growth stages are related to performance of the plant.

Mizoram in North East India, is located between 21º58’ to 23º35’ N latitude and 92º15’ to 93º29’ E longitude, surrounded by Tripura, Assam and Manipur in North frontier regions; Bangladesh in west; and Mayanmar in east and south. The undulated topography of Mizoram, known as Lushai hills during British period, has varied altitudes ranging from 21 to 2157 m above mean sea level, annual rainfall of 2000-3200 mm, and mean monthly temperature of summer (monsoon) ranges from 14.6ºC to 29.6ºC. Besides having good rainfall; the vegetable production, including leaf vegetables, during winter period is limited by acute soil moisture stress caused by high rate of evapo-transpiration, almost no rain from November-March, non-availability of irrigation water and low water holding capacity of the sloppy land (Singh et al., 2011; Singh et al., 2013b).

Leaf vegetables are rich sources of provitamin-A, vitamin-C and minerals like calcium, iron etc.  They also provide roughage required in human diet.  The Indian Council of Medical Research (1984) recommended a daily intake of 100 g and 40 g of leaf vegetables in the diet of woman and man, respectively. Amaranth, beet leaf, spinach, fenugreek, cabbage etc. are the major leaf vegetables grown in the country. In addition, a number of under-utilized annual crops are also grown as leaf vegetables in specific regions. Tender stems and leaves of a number of perennial crops are rich sources of vitamins and minerals and are used for cooking.  The major annual leaf vegetables have a few features in common:

ABSTRACT

The Indian short-nosed fruit bat, Cynopterus sphinx is one among the three paleotropical species known to make tents. Once a tent is made, male typically defends it against other competing males and also defends the females who join his tent.

Introduction

Leafy vegetables belong to an important group of vegetables and are highly nutritious due to their richness in Vitamin A (Carotene), Vitamin C, Folic acid, Riboflavin, Thiamine and minerals like Iron, Calcium and Phosphorus etc. Appreciable quantity of proteins is also found in these crops. They also provide a variety of phyto-nutrients including beta-carotene, lutein and zeaxanthin, which protect cells from damage, age-related problems, among many other effects. Dark green leaves even contain small amounts of Omega-3 fat. They are available at cheaper rate in the market as compared to other vegetables. They provide roughage and have an important place in the balanced diet. It is recommended that a daily intake of 100 g and 40 g of leafy vegetables in the diet of woman and man respectively. India is the 2^nd largest producer of leafy vegetables in the world after China, accounted for about 10% of the world production (Singh et al., 2006) but, the production levels of these leafy vegetables are very low because of lack of availability of high yielding varieties. Leafy vegetables are those crops from which leaves and associated parts are harvested for use as vegetable. The leaves of about 700 different kinds of plants belonging to125 families are consumed in the form of vegetables. The major leafy vegetables grown in the country are amaranth, spinach beet (desi palak), spinach and fenugreek. In addition to this a number of under-utilized annual crops are also grown as leafy vegetables in specific regions. Leafy vegetables are usually grown in kitchen and market gardens. Tender stems and leaves of a number of perennial crops are rich sources of vitamins and minerals and are used for cooking. Though leafy vegetables have high nitrate and oxalate levels, but adverse nutritional effects are not to be feared with a consumption level of 100-200 g per day. The commonly grown major leafy vegetables and their wild relatives are listed below