eChapters

Abstract

Biochar is the product of thermal degradation of organic materials in the absence of air (pyrolysis), and is distinguished from charcoal by its use as a soil amendment. Biochar is generally alkaline in pH and may increase soil pH with greater increase observed in sandy and loamy soils than in clayey soils. Biochar addition can increase cation exchange capacity, base saturation, exchangeable bases and organic carbon content as well as decreases in Al saturation in acid soils. Biochar enhances soil productivity by improving the physical, chemical and biological soil conditions. Improvement in soil structure increase soil water retention. A comparative study of soil fertility and leaching losses of nutrients between an Anthrosol and an adjacent unamended Ferralsols revealed that the Anthrasol had significantly higher P, Ca, Mn and Zn availability than the Ferralsol, and an increased biomass of both cowpea and rice by 38–45% without fertilization. More experimentation is needed to substantiate multiple benefits of biochar application in relevant soil-environment-climate-management factors and minimize any possible drawbacks in Indian perspective. Efficient use of biochar in agricultural system is one viable option that can enhance natural rates of carbon sequestration in the soil, reduce farm waste, enhance crop yield with concomitant improvement in soil quality.

Abstract

The J&K state, like other Himalayan states, is endowed with varied climates and agro-climatic situations and has the potential for improvement in a horticulture sector. Focus on selective issues based on the niches of the areas , strengthening the on-going programs of different developmental departments, site specific issues, backed up with latest technologies need to be identified which can have tangible and immediate impact on the farm economy. The horticulture section is doing well in Jammu and Kashmir state when compared with others food crops, since it fetches good price because of its nature of seasonality. The estimation of the potential profits can be drawn by the fact that a farmer producing wheat of 1 kg gets 10 times higher prices for the same produce in horticulture section. Considering this high potential, the concept of doubling farmer’s income can work magically with horticultural crops. There is a need of shift from traditional crops and cropping patterns. Technological interventions are required to strengthen the conditions of cold storage, adoption of farming system approach, instead of cropping system approach, incorporating element of diversification, promotion of cultivation of high value crops, efficient post-harvest management, value addition etc. popularization of technologies and schemes to achieve targeted growth in horticulture. Strengthening water resources through rainwater harvesting, soil moisture conservation and efficient utilization of stored/conserved rain water (micro-irrigation, fertigation). Promotion of niche commodities based on agro-ecological situations will benefit promotional efforts in horticulture development with increased benefit cost ratio.

Abstract

Worldwide trend in fruit crops has shifted to high density or meadow orcharding to manage tree size for desired architecture to allow better light interception and easy in operations such as pruning, pest control and harvesting. The meadow orcharding facilitates increase production as well as quality of fruits. High density planting (HDP) is one of the recent and novel concepts of increasing the productivity without affecting the quality of fruits. The HDP has been successfully demonstrated in fruit crops such as apple, mango, citrus, banana, pineapple and guava. However, for more location specific benefit research must continue on appropriate plant canopy, integrated nutrient management suitable varieties, ageing of orchard and tree replacement. HDP accommodates more number of trees per unit area ranging from 500-10,000 plants/ha depending on the type of fruit crop and the level of density such as medium high density 500-1500 plants/ha, optimum high density 1,500-10,000 plants/ha ultra-high density 10,000-1,00,000 plants/ha. High density orcharding is a highly technical entrepreneurship where nutrient management, irrigation and canopy management practices widely vary from traditional orchards hence growers must have full execution knowledge of this technology in present as well as future perspective. Post harvest, storage and marketing are closely associated with the success of HDP technology. Fruit yield increases 2 to 4 times vertically enhancing income of fruit growers.

Abstract

Seed priming is the innovative way of ensuring optimum germination and plant stand under moisture deficit situations. It enables the seed to tide over initial stress from biotic and abiotic factors. Higher yield with better quality seed are reported. The seeds of agronomic and horticultural crops are significantly affected by ageing and deterioration. Reversal or rejuvenation of aged seeds is therefore of primary interest. Experiments related to reversal of seed deterioration effects due to ageing relying heavily on accelerated ageing (AA) of seeds and their priming using various priming agents especially osmotic substances. Repair during germination is a hypothetical event supported by some investigators and questioned by others. Repair includes the spontaneous reorganization of plasma membrane phospholipids, which occurs during seed hydration. Alternatively or additionally, metabolic repair might occur. Experimental evidence for repair in imbibed seeds has been elusive. Priming reduced electrolyte leakage as well as lipid peroxidation in seeds implying the activation of membrane repair processes. Priming was also associated with increased levels of antioxidants like ascorbic acid and tocopherols particularly the latter and the activities of enzymes SOD, CAT POX involved in the mitigation of oxidative damage. In comparison with the priming of unaged seeds, the aged seeds experienced a diminution of response in terms of changes in the levels of antioxidants and scavenging enzymes. Thus, seed priming technique under climate extremities seems the best and economical means to sustain higher crop yields. The technique needs to be popularized among the farmers practicing agriculture and horticulture under rainfed situation so as to sustain production under climatic adversaries and enhance livelihood security and more profitability at the farm.

Abstract

Doubling the farmers’ income”, implies a 100 per cent growth of the current level of income of the farmers within a specific time frame, through multifaceted efforts of technological advancements in agriculture, policy formulation/ implementation, and efficient market system. The idea of doubling the farmers’ income during seven year period has by many experts been deemed impractical owing to the fact that a consistent annual growth rate of 14.86 per cent would be required in agricultural sector to double its GDP which has never had any history in the Indian agriculture. Some experts point out the possibility of success through appropriate technological intervention and viable government policies specific for each of the agro ecological zones of the nation. Increase in the farmer’s income doesn’t imply increase in nominal income through excessive production, but increase in real income, taking inflation into account. Production technologies, their use and impact are important factors to focus on doubling the farmers’ income. These technologies are already available across all the regions of the country but their adoption remains a problem to discuss always and partial adoption of the technological package can never be expected to get the desired results on ground. The results are suggestive of the pent up need to focus on the extension support on end-to-end approach from production to marketing with appropriate facilitation for inputs, insurance, credit, storage, marketing facilities etc. However, it would need involvement of all the stakeholders to come up on board to pursue this goal.

Abstract

Parasitic diseases are of great economic importance in livestock farming and are major obstacle in the health and productivity of animals. These may be due to endo-parasites that live inside the body or ecto-parasites such as ticks, mites, flies, fleas, midges, etc., which attack the body surface. Among ecto-parasites, ticks and mites are very important and harmful blood sucking external parasites of mammals. Blood sucking by large numbers of ticks causes reduction in body weight and anemia among domestic animals, while their bites also reduce the quality of hides. More than 250 species of mites can cause problems for humans and domestic animals because of their being vector for zoonotic diseases. Their attack may lead to problems of temporary irritation of the skin due to bites, persistent dermatitis due to mites invading skin or hair follicles, mite-induced allergies, transmission of pathogenic microbial agents, intermediate host of tapeworms, invading respiratory passages, ear canals and internal organs, fear of mites called acarophobia The economic or medical importance of the Acari increases with their ability to be vector for viruses, rickettsiae, spirochaetes, phytoplasmas, mycoplasmas and protozoa, or to harbor and transport nematodes, bacteria and fungi pathogens that affect plants, domestic and wild animals and humans. Ectoparasites were not considered serious problem till the introduction of exotic animals or exotic semen in India as the indigenous breeds were considered resistant to parasites and the damages occurred by them were totally ignored. Much awareness was not there about the diseases caused by ectoparasites like anaplasmosis therefore dairy producers had to bear losses both, in milk production and proper animal growth. Ectoparasites may be causing death of animals in certain cases. Losses in dairy, poultry, goatry and other livestock farming can be considerably reduced through strategic management of parasites. This needs timely detection, identification and development of effective control measures. 10-30% production losses are estimated by parasitic infestation. If profitability is the goal in livestock entrepreneurship then target has to be the animal health, productivity and quality produce through strategic management and awareness campaign on economic importance of parasites.

Abstract

Climate change is well acknowledged fact globally and in India has been witnessed with more frequent cloud bursts, highly variable frequency and distribution of rainfall, high seasonal thermal variations, receding glaciers and unstable agricultural production. Likely impact of climate change is expected to reduce agricultural productivity, production stability and incomes in some areas that already have high levels of food insecurity. However, Agriculture has the potential to retard the pace of climate change by capturing a significant part of the excess atmospheric carbon in the soil and plants in the form of organic matter and also competent to reduce emissions of nitrous oxide and methane if practiced in smart ways so developing climate-smart agriculture is thus crucial in achieving future food security and climate change goals. Transformations are needed in both commercial and subsistence agricultural systems, but with significant differences in priorities and capacity. Several climate smart agriculture practices such as cropping system improvement (e. g. crop rotation, diversification, improved varieties and integration of legumes), integrated nutrient management (e.g. green manure, compost and site specific nutrient management), resource conservation (e.g. minimum/zero tillage, keeping the land consistently covered with crop residues), precision water management (e.g. planting crops in bed, laser land leveling, mulching with crop residues) and agro-forestry have been proposed for adaptation to climate change and variability. However, their adoption decisions by the farmers are largely dependent on economic benefits associated with the interventions. It should be clearly understood that climate smart agriculture does not make use of different practices but certainly it uses them differently.

Abstract

ICT is contributing in every sphere of human society and agriculture cannot be an exception. It can bring revolutionary changes in farmers’ life by improving accessibility to information and knowledge. Farmers certainly feel empowered and with confidence can opt for innovative approaches in business farming. Nearly 70 percent of the bottom fifth of the population in developing countries own a mobile phone. The number of internet users has more than tripled in a decade, from 1 billion in 2005 to an estimated 3.2 billion at the end of 2015. Thus, ICTs provide faster and newer ways of delivering and accessing information to many and are potential tools for poverty alleviation, health, education, judiciary, agricultural marketing and sustainable development. As per an ICAR report 80 per cent of the technologies generated by the researchers in agricultural sector are either not transferred to the ultimate users or they do not find applicability in the farmer’s field. Out of the remaining 20 per cent of the technologies, around 50 per cent do not impress the farmers due to mainly its ineffective technology transfer that range from language to effective demonstration using the available tools. Information and communication technology revolution is the latest milestone in Indian agriculture that can usher an era of knowledge flow from institution to farmers field in much systematic and organized way and eliminate hurdles in technology transfer and adoption. From the perspective of agricultural knowledge and information systems (AKIS), ICTs can be seen as useful in improving linkages between the research, extension and the market sub systems. Real-time information and customized knowledge provided by ‘eChoupal’ enhance the ability of farmers to take decisions and align their farm output with market demand and secure quality and productivity. The eKrishi project, Market driven Agricultural Initiative through IT enabled Agri-business Centres in Kerala, addresses the existing gap in agriculture information flow and transaction management. The touch screen kiosk with information on cattle health was tried and tested under a United Kingdom Department of International Development (DFID) – Animal Health Program (AHP) supported project on dissemination of animal health knowledge for development of landless dairy cattle owners in the peri-urban regions of Pondicherry. Being a global resource, and with billions of users, the Internet requires some degree of international cooperation on technical matters as well as on standards and norms that can ensure that it remains a global public good, facilitating information flows and contributing towards sustainable development.

Abstract

The global economic burden due to zoonotic diseases is very high. According to a recent World Bank estimate, the economic burden due to six of the zoonotic diseases that have occurred in specific countries between 1997 and 2009 is estimated to be US$80 billion. In a worst-case scenario, potential losses from a pandemic influenza outbreak could be US$3 trillion, which is equivalent to 5% of the global GDP. Zoonotic diseases continue to represent an important health hazard in most parts of the world. More than 200 zoonotic diseases have been described, caused by bacteria, parasites, viruses, fungi and unconventional agents (e.g. prions). About 75 percent of the new diseases that have affected humans over the past ten years are caused by pathogens originating from animals or from products of animal origin. Many of these diseases have the potential to spread by various means over long distances and to become global problems. India contributes to substantial portion of the global burden of endemic zoonoses and is one of the several ‘EID hotspots’. The quality and safety of food supplies are put at risk by demands for more, cheaper food, driven by growing population and increasing urbanization, combined with a lack of resources to deal with issues related to food safety and lower or less rigorously enforced regulatory standards add to spread of zoonotic diseases. Human and financial resources that are dedicated by national authorities to the support of regulatory and non-regulatory food safety programs generally fall well short of needs. Commonly, many of the resources available are used for quality control of food for export, rather than products for domestic consumption, leaving the domestic market more vulnerable to unacceptable levels of food safety hazards, thus adding to the problem. In many developing countries, there is a substantial informal market that generally escapes any food safety controls. The successful control of zoonoses is possible if acceptable standards of life and social welfare are observed in developing country like India. Close cooperation and interaction between veterinarians, health physicians and public health operators, agriculturists and ecologists is thus necessary via one health approach strategy facilitating interdisciplinary collaborations and communications in all aspects of health care for humans, animals and the environment.

Abstract

Indian agriculture is undergoing rapid transformation and agricultural-based food industry in India requires timely and adequate supply of good quality raw material for processing, value addition and export. The recent growth and diversification of consumer demand and the expansion of organized agricultural processing and marketing ventures in India has the potential to boost the market opportunities, productivity, and incomes of farmers, including that of marginal and small holders. However, achieving these goals will likely require creation of new institutions and innovations to develop supply chains and facilitate linkages between farmers, wholesalers, processors, and retailers. Among these institutions and innovations are various models of contract farming, including those led by cooperatives, by farmer groups, and by various types of private sector resource intermediation that develop backward linkages to growers. Contract farming is a system where agricultural production is carried out according to an agreement between a buyer and farmers, which establishes conditions for the production and marketing of a farm product or products. In other words Contract Farming is a system of production and supply of agricultural/horticultural produce under forward contracts between producers/ suppliers and buyers. The essence of such an arrangement is the commitment of the producer to provide an agricultural commodity of a certain type, at a time and a price, and in a quantity required by a known and committed buyer. Well-managed contract farming is an effective approach to help solve many of the market linkage and access problems of small and marginal farmers which constitute 86% of the farming households in India. This chapter examines growth and status including the performance of different models of contract farming based on empirical studies. It concludes that by entering into the contractual arrangement, the income level of the farmer and employment level in the rural economy has increased despite certain problems faced by the farmers like delayed payment, delay in procurement and low supply of agricultural inputs to them.

Abstract

With its core intention to raise economic status of farmers, Govt of India vows for transformation in agriculture and sets goal to double farmers’ income by 2022. Nonetheless, net income increase at the farm is amalgamation of technologies, tactics and government policies. Farmers realized 3-4 times increment in their profit during era of green revolution when high yielding varieties and chemical fertilizers were introduced in early seventies. Subsequently income enhancement of the farmers continued through raising of farm productivity per unit area and entrepreneurship. Thus Indian agriculture experienced transformation through chemical fertilizers, high yielding varieties, synthetic pesticides, off-season cultivation, high yielding breeds, export orientation and entrepreneurship development in food processing, mushroom production, dairying and poultry. With the result, India emerged as top producer of milk, millets, pomegranate, banana, mango, jute, pulses, okra, safflower etc and second top producer of wheat, rice, tea, tomato, potato, onion etc and third in egg production and fourth in poultry meat. Consequence was evolution of commercial farming from subsistence farming. In era of globalization and increased purchase power of consumers, profitability at the farm has become subject of competitiveness, quality and consumer preference. Price shoot-up and market crashing of commodities in the country has made agriculture, a profession of risk, uncertainties and unpredictability. It has thus, lost creditability of socioeconomic security. To make it remunerative and attractive, a combo plan of transformational technologies that has the competence to break production and productivity barriers and can also address market needs as well as consumer preferences is highly wanted. There is urgent need to infuse characteristic of market orientation in agriculture through marketing information system and promoting demand driven production system with focus on zonalization of crops taking advantage of niche area or geographical indications. Commodity supply must remain high through promotion of climate resilient varieties or breeds, mechanization, adoption of hi-tech crop and livestock management practices. All this has to be made sustainable by way of produce and product diversification through integrated farming system, organic agriculture and secondary agriculture. Considering future vision, research initiatives must continue on noble areas like vertical farming and in vitro farming. Information and communication technologies will open avenue for assured marketing by linking production to consumption system via proper marketing and distribution leading to increased farm profitability. This as a whole will make transformation in agriculture a reality.

Abstract

Indian agriculture witnessed a transformation in early seventies with green revolution in cereals. The Green Revolution resulted in a record grain output of 131 million tons in 1978-79. Yield per unit of farmland improved by more than 30 per cent between 1947 and 1979. This was because of introduction of high yielding varieties and use of agro-chemicals, particularly synthetic fertilizers. Farmers realized 3-4 times increment in their profit when high yielding varieties and chemical fertilizers were used in integration. Agriculture is the primary source of livelihood for about 58 per cent of India’s population. Gross Value Added by agriculture, forestry and fishing is estimated at Rs 17.67 trillion (US$ 274.23 billion) in FY18. The Indian food industry is poised for huge growth, increasing its contribution to world food trade every year due to its immense potential for value addition, particularly within the food processing industry. Food & Grocery retail market in India was worth US$ 380 billion in 2017, is the world’s sixth largest, with retail contributing 70 per cent of the sales. The Indian food processing industry accounts for 32 per cent of the country’s total food market, one of the largest industries in India and is ranked fifth in terms of production, consumption, export and expected growth. It contributes around 8.80 and 8.39 per cent of Gross Value Added (GVA) in Manufacturing and Agriculture respectively, 13 per cent of India’s exports and six per cent of total industrial investment. During 2017-18, food grain production is estimated at 279.51 million tons, with rice and wheat production in the country at 111.52 MT and 98.61 MT, respectively in the same period. Milk production stands at 165.4 million tons during FY17, while meat production is 7.4 million tons. India is the second largest fruit producer in the world. Production of horticulture crops is estimated at record 307.16 million tons (mt) in 2017-18 as per second advance estimates. Total agricultural exports from India grew at a CAGR of 16.45 per cent over FY10-18 to reach US$ 38.21 billion in FY18. In April-May 2018 agriculture exports were US$ 6.43 billion. India is the largest producer, consumer and exporter of spices and spice products. Spice exports from India reached US$ 3.1 billion in 2017-18. Tea exports from India reached a 36 year high of 240.68 million kgs in CY 2017 while coffee exports reached record 395,000 tons in 2017-18.

Abstract

India today has 1.30 billion people and would be the world’s most populous country by 2025. The challenge is how to feed India’s growing population with rising income, but limited land and water resources. Whereas area under crop cultivation has come down from 142 million ha to 138 million ha, asking for protecting the arable lands from mass urbanization and more productivity per unit area. The agricultural production systems are still operating at low productivity and high uncertainty in the country. There is little or no alignment between production, the growth of agricultural commodities in the market and the supply of these commodities. All this leading to considerable farm produce wastage, mounting tremendous pressure on natural resources and would pose a challenge to the country in providing food, water, health, shelter, sanitation and jobs to all.

While industry and services have grown, agricultural sector has lagged behind. Information technology sector is growing consistently at 30 per cent every year but agriculture has not even achieved 4 per cent growth. The contribution of agricultural sector to national Gross Domestic Product (GDP) has continued to decline over the years; has shrunk from 55 per cent in 1951-52 to 14.6 per cent in 2015-16. Land fragmentation, reducing holding size, obscure marketing prospects, low water and inputs use efficiencies, modest level of mechanization, unorganization, unreliable returns from rainfed areas, inadequate storage infrastructure, weak processing sector and meagre investments continue to leave visible impressions on Indian agriculture. Nonetheless, agriculture remains a major source of employment, absorbing about 52 per cent of the total national workforce. Higher levels of investments in agriculture, both by the public and private sector can yield much better results if the reforms are undertaken to streamline not only the incentive structures for the farmers, but also the institutional framework to address the issues of integration, export orientation, infrastructure development, and information technology and management to achieve the objective of a innovative agricultural sector capable of providing food security to all. Farmer insecurity about crop failure also prevents them from adopting changes. A balance between risk and reward is considered to be an important economic factor for enhancing relationships. Trust among channel partners, power share and interdependence are other important factors for enhancing relationships in the supply chain system.

8.1. Vegetables

8.1.1. Tomato (Lycopsarsicon Esculentum)

Temperature: A warm climate crop can tolerate high temperature but cannot withstand frost. Minimum temperature for germination of seed is 8 to 10°C. Night temperature for fruit setting is 12 to 22°C. Critical night temperature for fruit setting is below 12°C. Critical day temperature for fruit setting is above 32°C. If the greenhouse can maintain the temperature as mentioned above then the non-terminal or indeterminate tomato crop can be grown for 10 to 12 month duration.

Variety: Indeterminate (producing flowers and fruits continuously along the stem as it grows) hybrid varieties resistant to nematodes or fusarium or verticilium wilt disease may be selected.

7.1. Introduction

Cultivation of crop is one of the most important aspects on which the success of a greenhouse depends. Principally it is similar to that of open field cultivation; but it is a completely different proposition in comparison. In greenhouse it needs (1) high precision technology, (2) special management, and (3) high qualityinputs. A special crop husbandry is extremely necessary, integrating all these three aspects, for successful greenhouse cultivation.

Why special crop husbandry? – Ancestors of each and every crop of modern time once grew out of its own in wild, without any human intervention. Gradually it has been domesticated or brought under cultivation by progressive alteration of its natural growing and reproduction process. Even the genetic nature also altered gradually. Till recent past these development of domestication process has been restricted principally on reproduction, planting, nutrient supply, water supply, and plant protection aspects. Interestingly most of these aspects are still very much supplementary in nature, as a good percent of it is still dependent on nature and its growing system.Actually, we cannot confer any significant change, physically or genetically, in their adaptation against the natural elements like rain, sunlight, temperature, humidity, gas supply, etc. However, we try our level best with a compromising note on local climate.

Hence there is ample scope to go for complete alteration of their growing habit/ practices in relation to each and every aspect of the climatic elements. It is a very difficult job, because, for a small change in any individual aspect of plant growth, all the other aspects are affected. Thus, one has to make a proper and holistic balance of alteration of all the growth aspects for each and every individual domesticated plant, we call as crop.

The greenhouse technology is all about the controlling of ambient climatic factors to create a favourable ‘micro-climate’ for the crop growth. The magnitude of such control may differ from minimal to maximum. It may control single (like rain) to multiple aspects (like rain, temperature, humidity, sun-light, wind, carbon-di-oxide, etc in combination). It can simply be done by manipulating natural factors using the suitable/appropriate design of the greenhouse or can be done in complex form by using/installing different devices and packages (may be software) with necessary automation in a specifically designed greenhouse.

It is a vast subject and very difficult to have a thumb-rule for such climate control mechanism due to seasonal climatic variations and most importantly due to the inter-relation effect between each and every climatic factors. Thus, it should be given sufficient space to maneuver the mechanism designed for a specific greenhouse targeting a specific crop.

Ways to control these climatic factors in a greenhouse

There are two basic ways to control the climate inside greenhouse.

Primarily, through a suitable design of the greenhouse itself, the inside microclimate can be controlled, obviously up to a certain level. Through manipulation of the design, particularly the naturally ventilated system, the rain water, temperature, humidity, CO_2, wind, etc can be controlled up to a certain level in favour of the crop.

Secondarily, by introducing equipments, tools, devices, etc we can control the micro-climate of a greenhouse. In most cases, it can take care of a number of climatic factors, like temperature and humidity, sun-light and temperature, etc simultaneously to provide a crop-wise micro-climate inside.

Frequently we use both the basic controlling methods, in combination, to achieve the required climate control system in a particular greenhouse.

We have already discussed about the different climatic factors that affect the crop micro-climate. Now we will discuss the basic control mechanism of each and every climatic factors and the related technology that can be utilized for greenhouse.

5.1. Introduction

Back drop: Since the concept of greenhouse technology was introduced, metal and wooden structures were tried in different parts of the world. When greenhouse was brought in the tropical and sub-tropical areas, people tried bamboo as construction material for greenhouse instead of iron or wood. However, due to the non-standard character of bamboo, the standardization of design of bamboo greenhouse, as a model, was not possible. Actually all such designs were very much clumsy and not at all comparable to the well established models of greenhouse having metal or wood frame.

Hence it is an urgent call to establish a standard design of bamboo greenhouse that can efficiently compete with the other common & commercial greenhouses made-up of GI-pipes.

Innovation: This greenhouse is structured by matured, cured & treated bamboo instead of usual structural elements (GI/MS/wood). For that matter (1) innovated design and construction methods and (2) a new curing method has been generated. It is very tough to standardize the design of bamboo greenhouses, specifically due to the non-standardized nature of bamboo. Unlike GI/MS pipe etc, bamboos do not have the same dimensions and uniformity in size & shape (diameter/ width/thickness etc). Thus, in general, bamboo greenhouses are low in height and are of naturally ventilated type. However, there is still huge scope to work on design of bamboo greenhouse for different climatic situation to avail the benefits of its natural advantages and low cost.

Design and Construction of a greenhouse involves five distinctly different aspects viz. (a) Basic form or type, (b) structure/designs, (c) covering materials and its fixing, (d) foundation and constructional detail, and (e) crop-support, irrigation and drainage planning.

All the above aspects are interlinked. To have a clear idea, these individual aspects are discussed separately.

4.1. Basic Forms of Greenhouse

Before considering anything about construction, one should finalize the form of construction. There are different forms of greenhouses for different climatic and crop situations. These types of structures are planned according to the requirement of farmer/promoter and obviously according to the purpose. Now we will describe, in brief, some of the important form or type of greenhouses.

4.1.1. Greenhouse covered with transparent and impervious material

These structures are covered with water/rain impermeable transparent materials which allow necessary solar radiation for optimal growth of plants. Simultaneously it protects crops from temperature-fluctuation, rain, wind, and creates a favourable situation in respect of CO₂ and humidity. This covering is also used to prevent the re-radiation of heat energy and conserve the heat generated in daytime to raise night temperature inside.

3.1. Non-Climatic Factors

Apart from climate several other non-climatic factors has to be considered before selection of proper greenhouse technology, which are listed in the following text.

1. Location and selection of site: The ideal location for greenhouse cultivation is an area having moderate climate with high sunlight, low humidity and good natural drainage. It is better to avoid storm prone areas or it is a must to take necessary protection, like wind-break and shelter belt, in such areas. However, selection of site, where the greenhouse will be constructed, is the first consideration to select the proper greenhouse technology. The proper selection of site will also depend upon various non-technical factors, which are listed below.

2.1. What is Greenhouse Technology?

Greenhouse technology involves primarily the structural design that can take care of climate control mechanisms to create proper micro-crop-climate and secondarily it involves the technology needed for optimum growth and production of crop grown under this structure. Combination of these two aspects may be expressed as ‘greenhouse technology’.

So the ‘greenhouse technology’ may be defined as “The technology required to built a structure, covered fully, partly or porously for manipulating the inside climatic conditions, under which crops/plants can be grown with special measures”.