eChapters

3.1. Maturity

• During process of maturation, fruit receives regular supply of food material from plant.

• When mature, abscission or corky layer forms at stern end stops inflow.

• Afterwards, fruit depends on own reserves, carbohydrates dehydrated and sugars accumulate until sugar acid ratio form.

• In addition, typical flavour and characteristic colour also develop.

• Stage of maturity at the time of picking influence storage life and quality of fruit

• Fruits harvested over mature or full ripe are easily susceptible to microbial and physiological spoilage and storage life reduction.

• Necessary to pick up fruits or vegetables at correct stage of maturity to facilitate proper ripening, distant transportation and maximum storage life.

• Principles of harvest maturity

? Harvested commodity should have its peak acceptable quality when it reaches the consumer.

? Produce should develop an acceptable flavour or appearance.

? Produce should have optimum size and shape required by the market.

Maturity

It is derived from Latin word ‘Maturus’ which means ripen. It is that stage of fruit development, which ensures attainment of maximum edible quality at the completion of ripening process.

Maturation

It is the developmental process by which the fruit attains maturity. It is the transient phase of development from near completion of physical growth to attainment of physiological maturity. There are different stages of maturation e.g. immature, mature, optimally mature, over mature.

Maturity Indices

The factors for determining the harvesting of horticulture commodities according to consumer purpose and type of commodity.

Maturity Indices is two type

1. MATURITY INDICES

Maturity indices (right time of harvesting) are quality factors that give clues as to when a product should be harvested to allow marketing flexibility and ensure the attainment of minimum acceptable quality to the user. It also refers to the set of criteria used to determine the stage of maturity for harvesting the horticultural crops. Commodities harvested either pre-mature or too late are more susceptible to postharvest physiological disorders, diseases and have poor shelf life than harvested at right stage of maturity. The pickers/ handlers are trained in methods of identifying produce that is ready for harvest. However, optimum harvesting stages depends upon type of produce and their final use. Horticultural crops may be harvested at two main maturity levels i.e., physiological maturity and commercial or horticultural maturity. Therefore, the proper stage/maturity indices for harvesting of all horticultural crops should be identified for their implementation during harvesting. Horticultural maturity in relation to developmental stages of the plants is depicted in Fig 3.1.

1. MATURITY INDICES
Maturity indices (right time of harvesting) are quality factors that give clues as to when a product should be harvested to allow marketing flexibility and ensure the attainment of minimum acceptable quality to the user. It also refers to the set of criteria used to determine the stage of maturity for harvesting the horticultural crops. Commodities harvested either pre-mature or too late are more susceptible to postharvest physiological disorders, diseases and have poor shelf life than harvested at right stage of maturity. The pickers/ handlers are trained in methods of identifying produce that is ready for harvest. However, optimum harvesting stages depends upon type of produce and their final use. Horticultural crops may be harvested at two main maturity levels i.e., physiological maturity and commercial or horticultural maturity. Therefore, the proper stage/maturity indices for harvesting of all horticultural crops should be identified for their implementation during harvesting. Horticultural maturity in relation to developmental stages of the plants is depicted in Fig 3.1.
Maturity indices are different for different horticultural crops and are employed to:
1. Ensure sensory quality (flavour, colour, aroma, and texture) and nutritional quality: Harvesting horticultural produce too early (under-developed or immature produce) will result

The horticultural produce includes fruits, vegetables, flowers, plantation crops and spices. However, fruits and vegetables are the most consumed and important commodity among them. Morphologically and physiologically, the fruits and vegetables are highly variable and may come from a root, stem, leaf, immature or fully mature and ripe fruits. They have variable shelf life and require different suitable conditions during marketing. All fresh horticultural crops are high in water content and are subjected to desiccation (wilting, shrivelling) and to mechanical injury. Various authorities have estimated that 20-30% of fresh horticultural produce is lost after harvest and these losses can assume considerable economic and social importance.

Maturity

It is the state of reaching a stage of full or advanced development of tissue of fruits and vegetables, after which it will ripen normally. During the process of maturation, the fruit receives a regular supply of food material from the plant and at maturity, the abscission or corky layer formed at the stem end stops this inflow. Afterwards, the fruit depend on its own reserves, and carbohydrates are dehydrated and sugars start accumulating until the sugar acid ratio formation. In addition to this, typical flavour and characteristic colour also develop. It has been determined that the stage of maturity at the time of picking influence the storage life and quality of fruit, when picked immature like mango develop white patches or air pockets during ripening, thus lacks in in normal brix acid ratio or sugar acid ratio, taste and flavour. On the other hand, if the fruits are harvested over mature or full ripe, then they are easily susceptible to microbial and physiological spoilage and their storage life is considerably reduced. Such fruits continue to show numerous problems during handling, storage and transportation. Therefore, it is necessary or essential to pick up the fruits or vegetables at correct stage of maturity to facilitate proper ripening, distant transportation and to obtain maximum storage life.

Maturity indices and their adoption at harvesting and in post harvest management of fruits provide a information against quality loss, microbial decay and deterioration of external appeal. Fruit harvesting at proper stage of maturity has direct effect on quality and market value of produce. Stage of harvesting also influence the after harvest enzymatic activities of the horticultural produce, which determines the levels of different pigments, sugars, acids and vitamins in fruits, flowers and vegetables. Maturity can be described as the attainment of a particular size, stage after which ripening takes place. However, horticultural maturity is defined as the stage of development when a plant or plant part possess the prerequisites for utilization by consumers for a particular purpose. Cucumbers, lettuce and peppers are harvested at various stages (Horticultural maturity) prior to reaching physiological maturity, or completion of growth phase.

There are many methods to determine produce maturity. The most common is the size of the individual commodity.Some other commonly used crude methods are colour change, Softening of the tissues (fig,sapota) ease of detachment from the stalk (Sapota, annona), shrivelling of fruit stalk (water melon), time elapsed from the date of flowering to picking maturity, sound by tapping jack and water melon when ripe produce hollow and dull sound on tapping but produce metallic sound if unripe etc. Another physical characteristic is the firmness and it is determined with a pressure tester. Firmness is often correlated with chemical changes that occur during ripening. Chemical characteristics include TSS, acidity, sugar, vitamins and pigments. There are certain test which accurately gives the maturity measurements such as use of colour charts (judge colour), penetrometers (firmness), brix: acid ratio etc. Other recent methods viz. thermal conductivity X-rays and NIR have also come in practice to judge the maturity of fruits and vegetables. Some commonly use maturity indices are given below in some of the important fruits.

Horticulture crops contribute significantly for the total agricultural production and productivity. World production of fruits accounted for the total volume of 933 million tonnes (FAO, 2023). India being second largest producer for majority of fruit commodities had a production total reaching 108.34 million tonnes in 2022-2023 from an area of 7.15 million hectares. It accounts for 33 per cent to the agriculture GVA (Gross Value Added) and plays an important role in the Indian economy. India is second largest producer of majority of fruits and vegetables. Diverse agro-climatic zones in the country make it possible to grow almost all varieties of fruits in India. Produced fruits are used for domestic consumption, processing and export purposes. During 2022 23, fresh fruits exports was valued at 6219.46 crores (APEDA, 2023). The fruits grown in India includes domestic fruits and nuts along with the exotic fruits contributing for the food and nutritional security. The growth of these economically important fruits provides scope for maintaining rich germplasm, enhance bio-diversity and maintain ecological balance.

Objectives

1. To study the maturity indices of various spices and condiments.
2. To study the harvesting time and yield of various spices and condiments.

Maturity: A stage of attainment of final state of biological function beyond which growth and development ceases.

Maturity indices: An indication of appropriate stage of harvesting of the produce.

Harvesting: It is deliberate action to separate the plant product from its source of attachment.

Why harvesting at right stage for spices and condiments?

1. To avoid loss of flavour and volatile oils
2. Reduction in yield due to shattering
3. To get the higher yield
4. Recovery of more essential oil
5. Chances of attack of mycotoxigenic and storage pest

Maturity can be defined as the attainment of a particular size or stage after which ripening takes place. It is also called physiological maturity. However,horticultural maturity is defined as the stage of development, when a plant or plant part possesses the prerequisites for utilization by consumers for a particular purpose. Mango, tomato, cucumbers, lettuce, peppers, etc. are harvested at various stages depending on the objective of disposal (horticultural maturity) prior to reaching physiological maturity, or completion of growth phase.

Maturity indices are the most important for deciding the stage of harvesting and to reduce post-harvest losses. The post harvest life of fruits are mainly controlled by maturity. Maturity signs are also called maturity standards or maturity indices. Maturity signs help in judging maturity of fruits and vegetables. There are many methods to determine maturity. The most common is the size and shape of fruit, change in colour, softening of tissues (fig, sapota), ease of detachment from the stalk (sapota, annona), shriveling of fruit stalk (watermelon), drying of nearest tendril (watermelon), days from blooming to picking maturity, sound by tapping jack and watermelon, when ripe produce hollow and dull sound on tapping but produce metallic sound if unripe etc.

Maturity of Cashewnut

Cashew fruit has two parts namely cashew nut (actual fruit) and cashew apple (pseudo fruit). Development of these is not parallel. Cashew nut develops first and the pseudo fruit develops later. It takes 60 days for both the nut and the pseudo fruit to develop completely since anthesis. Development of cashew apple and nut has been studied by number of workers in different cashew varieties (Rao et al., 1962; Augustin and Unnithan, 1981; Mohan Kumar et. al., 1984; Antarkar and Joshi, 1987). According to the report, specific gravity could be considered as physical index of maturity of nut in cashew varieties of V-1, 2, 3, 4 and 5 (Antarkar and Joshi, 1987; Mohan Kumar et al., 1984). In Thailand, the nut reached maximum size in 4 weeks after fruit set, hardened in the subsequent week and declined in size by 10 per cent at harvest (Sumrit Feungehan et al., 1989). Augustin and Unnithan (1981) have reported that the growth of nut is faster during early stage of development than that of fruit. All these reports indicate that the cashew nut develops earlier than cashew apple. Changes in the composition of cashew nut and apple during development have been looked into by various workers. Hariharan et al. (1985) have reported decrease in amino acid content in kernel with increased maturity. Cashew kernel lipid, free amino acids and CNSL have been shown to increase with increased maturity. Similarly, cashew kernel phenols have been shown to decrease with maturity. Changes in the kernel sugars and starch were not uniform (Anon., 1998).

5.1 Introduction

In many problems of economics, we may want to know how small or how large a certain quantity may become. In other words, we may want to know the minimum and maximum values of some functions of variables.

The term ‘optimisation’ may be used in general, both for maximisation and minimisation. The term ‘optimal position’ is often applied to the ‘equilibrium position’ resulting from the balancing of the forces.

Increasing crop productivity while reducing resource consumption is a central objective of modern agriculture. This chapter examines how artificial intelligence can support crop yield improvement through data-driven analysis, prediction, and decision-making. AI models can integrate information from soil, weather, crop growth, remote sensing, IoT sensors, and historical yield records to identify important factors influencing productivity. Machine learning and deep learning approaches can support yield forecasting, crop selection, fertilizer and water optimization, and precision management. The chapter also considers AI-enabled genomic selection, market intelligence, and intelligent farm management. Challenges such as data availability, implementation cost, connectivity, farmer training, and model reliability are discussed alongside future opportunities including edge AI and explainable AI.

A climate-resilient agriculture, which we need urgently, will have to be based on a two-pronged strategy: maximising farm productivity and production during a normal monsoon period, and minimising the adverse impact of unfavourable weather as witnessed during 2009.  Unfortunately, we are yet to develop an anticipatory research and extension programme to minimise damage during unfavourable monsoon periods.  For example, the deficiency in rainfall during the southwest monsoon of 2009 was 23 per cent.  The growth in agriculture and allied sector GDP was minus 0.2.  The highest growth rate in agriculture GDP of 5.2 per cent was observed during 2005-06 when the growth in total GDP was 9.5 per cent.  Had we had a scientific monsoon management strategy, we could have minimised the loss in 2009-10.  Similarly, if we have a strategy for maximising the benefits of a good monsoon, we can hope to achieve at least 5 per cent growth rate during 2010-11 in agriculture and allied sectors.  In parts of China like the Yunnan province, which has experienced 60 per cent less rainfall than normal, there is a move to grow different crops together in the same field, thereby distributing the risk arising from monoculture. It is time to develop a pro-active monsoon management strategy.

Crops treated with pesticides invariably contain small amount of these chemicals and the hazard depends on the amount of pesticide residues that remain on the crop and their toxicity. The amount of residue that may remain on crop or food commodity and environmental commodities depend on the nature of pesticides, good agricultural practice, environmental conditions and adoption of safe waiting periods and other perfect methods of storage. As residues are inevitable by product of pesticide use, hence pesticide residue in food commodities and their entry in to food chain has become major cause of concern all over the world. The plant science industry has a responsibility to assist farmers to produce crops that are acceptable to the food chain and consumers alike.

It is clear that pesticide residues in farm produce should be kept as low as practicable, and eliminated whenever possible through Good Agricultural Practices (GAP). However, the use of pesticides can be regulated to ensure minimum residues on food which can be considered safe to human consumption and environment as a whole.

To regulate pesticide residues to safe levels, a concept was introduced by Joint FAO/WHO Expert Committee on Food Additives (1955) and Codex Alimentarius Commissionwas established in 1964 to implement the Joint FAO/ WHO Food Standard Programmes. The Commission has laid down principles for aiming at the maximum residue limits (Tolerance limits) of pesticide on food commodities. The recommendations are based on:

Abstract

Worldwide trend in fruit crops has shifted to high density or meadow orcharding to manage tree size for desired architecture to allow better light interception and easy in operations such as pruning, pest control and harvesting. The meadow orcharding facilitates increase production as well as quality of fruits. High density planting (HDP) is one of the recent and novel concepts of increasing the productivity without affecting the quality of fruits. The HDP has been successfully demonstrated in fruit crops such as apple, mango, citrus, banana, pineapple and guava. However, for more location specific benefit research must continue on appropriate plant canopy, integrated nutrient management suitable varieties, ageing of orchard and tree replacement. HDP accommodates more number of trees per unit area ranging from 500-10,000 plants/ha depending on the type of fruit crop and the level of density such as medium high density 500-1500 plants/ha, optimum high density 1,500-10,000 plants/ha ultra-high density 10,000-1,00,000 plants/ha. High density orcharding is a highly technical entrepreneurship where nutrient management, irrigation and canopy management practices widely vary from traditional orchards hence growers must have full execution knowledge of this technology in present as well as future perspective. Post harvest, storage and marketing are closely associated with the success of HDP technology. Fruit yield increases 2 to 4 times vertically enhancing income of fruit growers.

Wet sieving procedure separates soil into different size aggregates. However, for comparing the aggregate size distribution among management treatments and soil types, it is convenient to use indices. Mean weight diameter (MWD) and water stable aggregate percentage are some of the common indices used in aggregate stability studies.

Mean Weight Diameter (MWD)

This index was proposed by Van Bavel (1949) and is being used widely. The entire soil sample is passed through an 8 mm sieve prior to analysis and is subjected to wet sieving procedure as described before. The parameter which Van Bavel (1949) called the MWD is equal to the sum of the product of (a) the mean diameter (d ) of each size fraction and (b) the proportion of the total sample weight (w ) occurring in the corresponding size fraction. The summation is carried out over all ‘n’ size fraction including the one that passes through the finest sieve.

Participation means different things to different people. They way participant is defined largely depends upon the context and back ground in which participation is applied. While the Economic Commission for Latin America (1973) considers contribution by the people to public programmes to the complete exclusion of any involvement in the decision making process as participation. Cohem and Uphoff (1977) maintain that participation tools includes the peoples involvement in the entire decision making process. Like Cohem & Uphoff, FAO (1982) emphasizes participation in all the decision making processes but by the people’s organization and through self organized action. Paul (1987) introduces the concept of enhancement of well-being in terms of values cherished by the communities as being the ultimate objective of participation.

We mean sustainable of agriculture as preservation of productivity of land for a long period. This requires deviation from present methods of cultivation. The deviation needs knowledge about ecological process. At present we mean agriculture in association with terms like, high-tech, bio-tech and info-tech. Our traditional farming system or conventional farming system essentially means sustainable agriculture.