eChapters

The chemistry of humic substances is the least comprehended in the field of Soil Science. The many important functions of humus will remain obscure if the structural chemistry of the humic and fulvic acids is not known. A variety of functional groups have been reported in humic substances. However, considerable disagreement still exists in respect of the exact amounts present and, in some cases, proof of existence is lacking.

Some important structural groups of organic molecules are given below:

Understanding the mechanisms controlling the adsorption of organic molecules on clay minerals is of significance in many branches of science and industry. The interaction between clay minerals and organic compounds elicits interest that emanates from the prospect that the adsorption of the organic matter fraction in the soil on the mineral particles would render physical stability to soil aggregates.

Organic compounds tend to interact with clay minerals by:

• adsorption process at the external surfaces
• adsorption process at the external and internal surfaces

Extensive studies have shown that much of the humified material in soil is finely bound to colloidal clay. However, it is uncertain to what proportion of the clay surface in any given soil is coated by organic substances as this will depend on the organic matter content and the type and amount of clay.

The ways in which organic substances are retained in soil are as follows:

1. As insoluble polymeric complexes of humic and fulvic acids.
2. As polymeric complexes of humic and fulvic acids bound together by di- and trivalent cations such as Ca²+, Fe³+ and Al³+.

Organic matter is of immense importance in forming good aggregates in a wide range of soil types, particularly those representing Mollisols, Alfisols, Ultisols and Inceptisols. Organic matter is somewhat less important in the Oxisols where hydrous oxides may play apredominant role. These relationships are depicted in Fig. 13.

Fig. 13.1: Relationship between OM and the formation of soil aggregates

Aggregates do not directly influence plant growth, but they alter the physical and chemical environments in which plant roots grow through their effects on porosity, aeration, moisture retention, etc., when well-irrigated, even fine- textured soils permit adequate exchange of gases with the atmosphere. The polysaccharides of soil have received the greatest attention in producing stable aggregates, but other organic substances bonded to clay through association with Fe or Al may also be involved.

It is well known that organic matter plays a unique role in the binding of pesticides in soil, and that this phenomenon is usually the most important cause for interaction of pesticides in the soil environment. Fulvic or humic acids are most commonly associated with the binding interactions. Binding can take place with either the original pesticide or a transformation product, the reaction being induced by abiotic or biotic agents (microbial or plant enzymes). The reactions or processes involved are apparently the same as those responsible for the formation of humic substances, i.e., for the humification process.

Humic substances are the most widely-present, natural, complexing ligands occurring in nature. They are found not only in soils, but in natural waters, sewage, compost heaps, marine and lake sediments, peat bogs, carbonaceous shales, coals and other miscellaneous deposits.

The fate of natural organic matter, especially humic substances, has over recent decades attracted increasing attention of scientists representing various disciplines. Humic substances constitute about 25% of the total organic carbon on the earth. These are a group of naturally occurring complex molecular structures into which biomolecules derived from plant and animal residues are transformed progressively through biotic and abiotic pathways, by aggregation and accumulation processes

Humic substances, the natural organic materials, represent a mixture of relatively small organic components, which form supramolecular structures held together by dispersive forces such as n - n and van der Waals’ interactions. Identification of the best analytical method for complete characterization of humic substances is still being discussed. Humic substances differ in molecular weight, elemental composition, acidity and cation exchange capacity and often are classified into three major fractions according to their solubility as humic acids, fulvic acids and humins.

The nuclear magnetic resonance spectroscopy (NMR) has led to major advances in the studies on the nature and chemical composition of soil organic matter. The technique has the potential for characterizing organic matter in the intact soil and its size fractions without the need for extraction and fractionation. Furthermore, it can provide information on the compositional changes in crop residues, peat and litter of the forest soils during biodegradation and humification.

The study of soil organic matter is becoming increasingly important by the day as world agriculture attempts to ensure sustainability of soils, while at the same time striving to enhance food production to feed an ever-burgeoning population. The use of green manures and pasture leys, the return of residues and additions of organic amendments to the soil are often resorted to in an attempt to increase soil organic matter which immensely benefit the physical, chemical and biological make-up of the soil.

Managing soil organic matter is of paramount importance in sustainable crop production. Human interventions always lead to a decrease in soil organic matter content and biological activity. Therefore, even for maintaining moderate levels of organic matter in soils, sustained efforts should be in place. Such sustained efforts should include adopting high-residue crops in rotation and ensuring regular return of residues to soils.

It is all the more difficult to maintain the organic matter content in well aerated soils and soils of hot and arid regions, because in these soils added materials decompose rapidly. However, in comparison, it may not be so difficult to maintain the organic matter levels in fine-textured soils with restricted aeration and in soils of cold temperate regions.

19.1. Measures that Decrease Soil Organic Matter Content

Methods and procedures for the qualitative characterization and quantitative analysis of different constituents of soil organic matter are presented in this Chapter.

20.1. Moisture

The soil sample should be in an air-dry condition after mixing, sieving and grinding. When stored in a moisture-tight container, the free H₂O content should not vary appreciably during storage. While most determinations can be done on air-dry samples, for certain purposes such as obtaining summation values, a moisture content value is required.

ntroduction

Millions of living organisms present in soil make it a living and a dynamic system. Under a microscope, it reveals a complex array of soil particles and pore spaces filled with air and water. In these pore spaces that plant roots and millions of organisms develop, which are ranging from sub-microscopic to macroscopic in size. The physical and chemical characteristics of soil determine the nature of the environment in which vast number of soil microorganisms especially soil microorganisms are found. Living organisms in soils include both macro (earthworms, rodents, termites etc.) and microorganisms (bacteria, fungi, actinomycetes, algae and protozoa). These organisms not only help in the development of soils but also carry out a number of transformations, facilitating the availability of nutrients to the plants.

Introduction

The microorganisms exist as single cell or cluster of cells capable of orderly growth, metabolism and reproduction in two identical daughter cells. These includes cellular organisms {protozoa, algae and fungi (Eukaryotes), bacteria and archaea (Prokaryotes)} and viruses (non cellular entities). The study of microorganisms contribute to understanding of :

1. Basic biological sciences - It acts as a tool for providing the basic information for life processes. The discovery of DNA, RNA, proteins and enzyme functions all came from microbial study.
2. Applied biological sciences - Medicine, agriculture, industry, plant and animal pathology, immunology, plant and animal nutrition, biotechnology all have origin from the understanding of the cell function and metabolism of microorganisms.

Introduction

The term actinomycetes, coined in the late 1800s (actins, meaning ‘ray’ and myces, meaning ‘fungus’) is a misnomer. Because actinomycetes have a considerably smaller aerial mycelium than fungi and can produce a large number of asexual spores called conidia, which give the colonies a ‘powdery or chalky’ look.

The actinomycetes constitute a specialized group of soil bacteria that occur in soils throughout the world. The actinomycetes are prokaryotes confirming cellular structures and functions of true bacteria and their morphological similarity to the fungi (Eukaryotes). Between bacteria and fungi, actinomycetes are a transitional category. On their hyphae, most actinomycetes produce single, pairs, or chains of asexual spores.The diameter of the hyphae varies from 0.5 to 1.0 µm. 

Fungi are a diverse group of multicellular eukaryotic organisms with wide variation in vegetative and reproductive morphologies and diverse life cycles. They are more abundant, on a mass basis, in soils than any other group of microorganisms; their biomass ranges from 500 to 5000 wet kg ha^-1 (Metting, 1993). Fungi inhabit almost any niche containing organic substrates, so that they are active participants in ecosystems as -

• degraders of organic matter
• agents of disease as well as beneficial symbionts - lichen (algae and fungi), mycorrhizal association

Introduction

Soil algae are not as numerous as bacteria, actinomycetes and fungi. Furthermore, these are photosynthetic microorganisms. Recent work has led to a more complete knowledge of the ecology and importance of terrestrial algae. These algae are found abundant in the habitats in which moisture is adequate and light is accessible.

Classification

Soil algae are classified into four major classes:

1. Cyanophyceae (Blue green algae)
2. Chlorophyceae (Green algae)

Introduction

The soil protozoa are unicellular and the simplest forms of animal life. Most of the protozoa are devoid of chlorophyll but transitional genera resemble the algae and possess chloroplasts containing chlorophyll pigments. The active life stage is commonly known as trophozoite phase where they feed and multiply but under adverse climatic conditions, they form resting stage or cyst, which develop a thick coating on the cell surface. Mostly, the protozoa multiply by longitudinal or transverse fission but some species reproduce sexually by fusion of two cells followed by exchange of genetic material between their nuclei and cell division.

Introduction

The microbial cells of bacteria, actinomycetes, fungi, algae and protozoa are visible by light microscopy. Beyond the resolution of light microscope are the unique organisms that are sub microscopic and intracellular parasites known as viruses. The term virus is a Latin word means poisonous substance. The viruses are functionally and metabolically different from the cellular organisms as (i) they are infectious agents and contain only one type of nucleic acid encapsulated in a protein coat. Some may possess membranes but do not have any cytoplasm or metabolism of their own. (ii) They are much smaller in size than the smallest bacteria and can pass through bacteriological filters. 

To a soil microorganism, the rhizosphere is like a lush oasis in the desert. In comparison to near-starvation conditions of the bulk soil, the rhizosphere is the place where nutrients are plentiful and microorganisms flourish. The term rhizosphere was first used by Hiltner in 1904 to describe the zone of soil under the influence of roots. The rhizosphere can extend more than 5 mm from the root and is the area of increased microbial activity due to exudation of low molecular weight compounds from root cells. The rhizoplane is the surface of plant root and any strongly adhering soil particles. The microbial populations that colonize the interior of the root and from intimate associations with the root are considered endophytes.

There are two mini-cycles in the soil nitrogen cycle:

1. Soil-based processes such as mineralization, ammonification, nitrification, and immobilisation include the conversion of organic nitrogenous molecules to plant-useable mineral forms, and subsequently back to biomass (microbial, plant and indirectly animal biomass).
2. The process of converting atmospheric nitrogen into forms available to the living components of the ecosystem, i.e. nitrogen fixation and the transformations within the soil, as well as the return of the fixed nitrogen to atmospheric inert forms of nitrogen through denitrification, are all soil and biosphere resident processes.

At the point where ammonium is produced, the reactions involved in organic nitrogen mineralization come to a halt. This most reduced form of inorganic nitrogen is the starting point for the nitrification process, which involves the biological synthesis of nitrate or nitrite from reduced nitrogen molecules. The ability of nitrifying bacteria to create nitrate, which is the primary nitrogen source ingested by higher plants, determines their relevance. Nitrate is formed in a variety of places, including soil, marine environments, manure piles, and sewage treatment, where it is the result of the final stage of turning organic nitrogen inoffensive.

Introduction

The various reactions of nitrogen (N₂) cycle, transform one form of the element to another. Mineralization liberates nitrogen in inorganic form, immobilization converts its back to an unavailable state, while nitrification changes the nitrogen from a reduced to oxidized state. Certain transformations of nitrogen lead to a net loss of element from the soil through volatilization. For the purpose of crop production, nitrogen volatilization has a deleterious influence because it depletes part of soils reserve of an essential nutrient. The sequence of steps that results in gaseous loss is called denitrification. So denitrification refers to the reduction of nitrates and nitrites to gaseous nitrogen products, principally di-nitrogen and nitrous oxide, coupled to energy production through oxidative phosphorylation.

The excessive and imbalanced use of nitrogenous fertilizers in the last few decades to meet the challenges of growing food demand of Worlds population has led to serious consequences of soil and water pollution, leaching of toxic nitrate into ground water and volatilization of nitrogen oxides into the environment. Therefore, judicious management of nitrogen in the environment is very much essential in the development of more productive and sustainable agriculture. Rapid declining of non-renewable energy sources viz. petroleum products, natural gas as well as energy crisis in the recent days, release of several pollutants during production of fertilizer N has also necessitated the development of alternative and/or supplemental technologies to obtain the fertilizer N for crop production.

Introduction

Phosphorus is only second to nitrogen as a mineral nutrient required for plants, animals and microorganisms. It is a major constituent of nucleic acids in all living systems essential in the accumulation and release of energy during cellular metabolism. Phosphorus is found in soil, plants and microorganisms in number of organic and inorganic compounds. It is the second major inorganic nutrient after nitrogen in term of quantitative requirement for both crop plants and microorganisms. This element may be added to soil in the form of chemical fertilizers, or it may be incorporated as leaf litter, plant residues or animal remains. In cultivated soils it is present in abundance (i.e. 1100 kg/ha), but most of which is not available to plants, only 15% of total soil phosphorus is in available form. Thus, phosphorus occupies a critical position both in plant growth and in the biology of soil.

Introduction

In soil, microorganisms influence not only the availability of carbon and nitrogen, which are important constituents of plants, but also of sulfur (S), phosphorus and many other trace elements for plant absorption. Sulphur is found widely distributed and considered as tenth most abundant element in the nature. Sulfur is considered as an essential element for survival of plant and animals and found as gypsum (CaSO₄.2H₂O), pyrite (FeS₂) and other combined form and also in elemental form (S⁰) in the nature. The requirement of sulphur by plant is comparatively less than the primary nutrients, hence sulfur is recognised as ‘secondary’ nutrient. 

Unlike root-free soil, the rhizosphere around growing plants is a very dynamic environment that hosts a much higher number of microbes, in particular bacteria. Microbes interact with each other and with plants in symbiotic, associative, neutral or antagonistic ways. A plant colonized or penetrated by a microorganism can either result in asymptomatic or disease or form an association or symbiosis, depending on the cells’ perception of each other and how the environment affects that interaction. Microbes that penetrate and colonize plants have developed elaborate strategies to subvert plant defenses.

1.1 Background

The whole world is characterized by diverse cultures, different approaches to life, divergent outlooks and world views and dissimilar living conditions and environments. The people in it live with cultural, social, economic and educational dissimilarities, differences, inequalities, and goals. Despite the disparities in everything, the whole world is unified by Information, Communication and Technology through the global media culture, technocapitalism, and information revolution. Gone are the days when people confined themselves to their hearths, farms, educational institutions and places of work, managing their lives with basic minimum requirements and needs! 

2.1 Introduction

The journey through the research work and the resultant publication of research articles, review notes and books by innumerable authors in the field of Information Technology, and Communication, Library Sciences, Social Media and Popular Culture has been the basis for this chapter: The Review of Literature. The following is a report of how and what lead to arrive at the objectives, hypotheses and methods of researching this field and the concerns of the researchers and the authors. Reading innumerable articles, research papers, and books helped in writing this literature review strengthened the knowledge about the topic of this study. It has been of immense use to learn essential concepts, research methods, and experimental techniques used in this field. Another benefit of the extensive reading of relevant literature has been the knowledge and understanding of how to present the insights, research findings, and claims discussed and explained scientifically and systematically. Through this reading exercise, the topic of the research and its objectives were finalized. 

Research methodology is a systematic approach to solve any research problem and arrive at a conclusion that adds to the already existing fund of knowledge. The research methodology seeks to define the solution by adopting appropriate research techniques. They are generally applied during the initial stage of the study to delineate and outline the rationale for the chosen methods and their functionality and effectiveness towards achieving a decided objective. Research methodologies are an organized approach to accomplish the selected objectives. The research methodology comprises different techniques used during the experiment with surveys, tests, etc.

4.1 Introduction

With the birth of the new millennium and the advent of Information and Communication Technology, the outlook of academia towards research has completely metamorphosed into a more productive and vibrant activity. Digitalization of data, the convergence of new and challenging insights in one’s own research fields at the world-wide-web and technology generation are being made faster and more reliable. With the arrival of Laptops and Smartphones simultaneously with the facility Wi-Fi, the demand for information of any kind has become unquantifiable! The academic world is no exception, indeed! Such a pang of hunger for information led to considerable investments in infrastructure development. The virtual, electronic, automated world became inseparable from academic and research institutions. Small wonder that with these, the pressures on the institutional and specialized and dedicated libraries are on the increase.

5.1 Introduction

This chapter presents analysis of data collected through the questionnaire survey from agriculture libraries in Maharashtra (Constituent including University Libraries i.e. Government and Affiliated i.e. Private colleges). The purpose of the survey was to explore the status of CRS (Cyber Reference Service), various aspects pertaining to the CRS, and the ICT infrastructure used for the CRS in the agriculture universities and college libraries. It also aimed to obtain agriculture library heads’ perceptions about the CRS, and explore issues and problems affecting implementation and management of the CRS in the agriculture libraries in the Maharashtra state.

This chapter presents the conclusions of the research study. Based on these conclusions, recommendations relating to the effective implementation and management of Cyber Reference Service (CRS) in agricultural libraries in Maharashtra are made.

6.1 Introduction

The overall aim of this research was to investigate and analyze CRS in the Agricultural College and University libraries of Maharashtra. The study adopted a mixed-methods approach by combining quantitative and qualitative methods to achieve its aims and objectives. 

Uncertainty is an inevitable character of any system where most of the contradictory factors are either unpredictable or unfathomable. The higher is the complexity, the lesser would be the resilience. Agricultural production system, as it is managed in Indian condition, is the most vulnerable one to a plethora of uncertainties. Mostly managed in an open air rained conditions, it has been exposed to weather and resource uncertainties comprising of market volatility, poor access to technology and a fragile input delivery mechanism. The present study examines and depicts the possible issues and reasons for uncertainty.

Review of literature helps a scholar describing and citing related works to justify the topic and objectives set in the thesis work. This is a splendid scholastic exercise to vindicate and validate the reasons and output of the research work undertaken.

Following is the classified review of literature for a systematic illustration and interpretation of the problem and axioms:

Source of risk

Boris and Radivoj (2017) reveal that agricultural risk and uncertainty come from many different places, but they can be categorized into five management-related categories: production and technology, prices and the market, finance, legislation, and employees.

Concept of uncertainty

Uncertainty refers to a scenario in which a person is unsure of what will happen, i.e. when all possible outcomes of events are unknown, and neither the likelihood nor the outcomes are known. Uncertainty cannot be quantified; however, risk may be quantified using probability principles.

Farming is a financially hazardous profession. Farmers face an ever-changing panorama of possible pricing, yield, and other outcomes that affect their financial returns and overall well-being on a daily basis. Because the effects of decisions or events are frequently unknown until long after they occur, the outcomes may be better or worse than planned. When aggregate crop output or export demand fluctuates dramatically, for example, farm prices can swing dramatically, and farmers may see returns that are significantly below their expectations (Bairwa et al., 2013).

Research setting refers to the detail information of an area where the study has been conducted. The study area, generally comprises of a particular geographical area viz. a state, district, block, or gram panchayat area selected according to the convenience of the investigator who possesses adequate knowledge regarding the location, communication facility etc. of the locality so that he/she can easily approach each and every corner of the area for data collection. Here. in this study the data collection was done mostly over telephone based on the interview schedule due to Covid-19 pandemic situation. Besides the investigators must also have the basic knowledge about the socio demographic background of the people so as to have an easy understanding of their knowledge, attitude and behavior. 

The deliberation on the methodology has been made to understand the concept, methods and techniques which have been executed for delineating the study, collection of information, analysis of data, and interpretation of the findings for the revelation of hard evidences and formulation of theories. This chapter deals with the method and procedure used in the study consisting of eight main parts

A. Locale of research

B. Pilot study

C. Sampling Design

D. Item analysis and experts rating for devising scoring technique on dependent variables

E. Empirical measurement of the variables.

The chapter deals with the empirical findings and analyses in order to offer ample interpretation for a reliable conclusion to be drawn. In order to enhance and supplement the textual materials in this chapter, tables and models are frequently employed. Discussion is helpful in putting the study’s findings into proper perspective and connecting them to related research.

Table 6.1: Descriptive Statistics of Variable with respect to Minimum, Maximum, Mean, Standard Deviation of Values, Variance, and Coefficient of Variance

Uncertainty is an inevitable character of any system where most of the contradictory factors are either unpredictable or unfathomable. The higher is the complexity, the lesser would be the resilience. Agricultural production system, as it is managed in Indian condition, is the most vulnerable one to a plethora of uncertainties. Mostly managed in an open air rainfed conditions, it has been exposed to weather and resource uncertainties, market volatility, poor access to technology and a fragile input delivery mechanism.

Objectives

1. To estimate and assess the general status of perceived uncertainty of farmers by scale and dimension

8.1. Limitations

The most important limitations which have been observed in this research are as follows:

1. Bench marking on the status of reigning uncertainty and chaos on farming’has really been a difficult task.
2. There are problems of overlapping of some variables that could have been avoided.
3. Some new scales could have been better if created.
4. Since the concept is complex, it was very difficult to get qualitative response.
5. Farmers nowadays are reluctant to engage in conversation and produce data.
6. Due to non-random sampling , there is possibility of error or biases.

Growth of urban population has become a challenge throughout the world. Presently, many of the cities are featured with high rising buildings, rush of vehicular traffic and networking of industrial establishments. The urban ecological footprints are increasing day-by-day resulting in unfavourable living conditions. The cities require vast area of land to sustain the population for requirement of food, clothing and other requirements. All these items are brought from areas outside the city, may be from far or near. Creating avenue for production of food and other materials in and around the cities will certainly minimize the pressure on land available outside the city areas. The urban sustainability is at threat due to environmental pollution, rising population and intensification of non-green activities. Many cities have natural resources such as water bodies, inherent vegetation, open space, etc.; which can be appropriately utilized for productive purpose. Promotion of urban agriculture in the form of growing crops, planting trees rearing animals and encouraging landscape garden will have long term impact on urban ecosystem. This can prevent environmental degradation, ensure supply of fresh food and improvement in urban life.

Urban agriculture involves various aspects of growing plants and taking up other activities. Those include terrace gardening, vertical gardening, green walls, hydroponics, etc. Although several other types of garden present in urban areas, the gardens suitable for residental premises are discussed in chapter.

Terrace Garden

Terrace garden is generally established on a terrace or rooftop of a house having limited land space for gardening. This type of gardening is gaining momentum in the cities. These gardens can be created on different buildings like residential flats, individual houses, public buildings, commercial establishments and factories. The growth and development of the plants give immense pleasure to the garden owner. Plucking a fresh cucumber on the terrace provides a different pleasure, which is beyond the physical value of the fruit. The experience of consuming a fresh watermelon from own garden has unique satisfaction. As there is minimum or no space for growing plants in urban areas, the terrace can be transformed to an attractive garden. Irrespective of size of the terrace, it can be converted to a beautiful garden with proper planning. There are multiple ways for revamping the terrace depending on available time and resources.

Floriculture is the most important aspect of urban agriculture, which fulfils the need for beautification, recreation, entertainment and income earning. In broader sense, it includes growing flowering and ornamental plants in gardens, rooftops and terraces. Floriculture comprises of house plants, flowering plants, pot plants, cut flowers and decorative foliage. It also deals with cultivation of cacti, orchids, succulents, bonsai, ferns and plants grown in landscape gardening.

Role of flowers in our life

• It is a unique gift of nature to relax human mind
• The fragrance and beauty of flowers bring joy and happiness
• Flowers are used as a symbol of grace and sophistication
• Flowers are used in religious rituals for offering during worship

Foliage plants are grown for attractive branches and leaves. These plants have several benefits such as improving air quality, promoting better mental & physical health and enhancing the aesthetic value of the immediate vicinity. Some of the foliage plants grown in indoor or in the garden are described in this chapter.

Dieffenbachia

Dieffenbachia is a foliage plant with large and showy leaves. This is native to the West Indies. It is a very popular plant grown in the home gardens due to easy maintenance. The beauty of the plant lies in the unique pattern of colour combination of the leaves. The leaves are yellow near the vein, which turns dark green towards the edge. This combination is random and even within the same leaf, different patterns of ribbons and spots of yellow & green are formed. It can be taken up under various light intensity and growing conditions. Dieffenbachia plants grow up to 2.4 meter height with wide leaves of around 50 cm long and 25 cm wide. 

Fruit trees can be planted in the backyard or any open space near the house. In absence of backyard area, fruit trees can also be grown on the rooftop by planting in polythene bag, plastic container, cemented pot, etc. Growing fruits like papaya, banana, lemon, mango, pineapple, coconut, pomegranate, etc. in the premises of house can fulfil the family requirement of fruits. It will help to get fresh fruits from own garden, which are free from any chemical or pesticide. There is a different satisfaction in plucking of fruits grown by own effect.

Mango

Mango (Mangifera indica) is one of the prominent fruit crops of India. It has delicious taste and excellent flavour. Mango fruit is utilized at all the stages of its development. Raw fruits are used for preparation of pickle, chutney and juice. The ripe fruits are consumed directly and are used for preparation of several products like squash, syrup, jam and jelly. Ripe mango contains about 0.6 per cent protein, 0.1 per cent fat, 11.8 per cent carbohydrate, 0.3 per cent minerals and 1.1 per cent fibre. 

Vegetable refers to the edible parts of plant such as leaf, root, stem, fruit, rhizome, corm or seeds consumed directly or after cooking. Vegetables are an important constituent of balanced diet taken for good health. Vegetables are good source of dietary fibre, protein, essential vitamins, minerals and antioxidants. Hence, vegetables play a vital role for human health. In urban areas, vegetables can be grown in the backyard, rooftop and terrace. Harvesting vegetables from own garden has a separate satisfaction. The vegetables produced in home gardens are of superior quality as those do not contain any harmful toxic substance. Growing vegetables in the home premises will reduce the daily expenditure of a family. In urban areas, vegetable can be taken in small patches in the backyard to fulfil the family requirement. In absence of surplus land area, it can be grown in pots, containers or polythene bags placed on the rooftop or terrace. Some vegetables can also be grown on the rooftop in a specially prepared bed with shallow depth of soil. In this chapter, discussion is made for cultivation of vegetables in small patches.

India is known to be rich source of medicinal plants since ancient time. Medicinal plants like Aloe vera, Aswagandha, basil, mint, cinnamon, etc. are widely used to cure various ailments and for several health benefits. Some of the common diseases like common cold, headache, stomach problem, skin disease, etc. are treated in home by use of various herbs. Medicinal plants can be grown in the backyard or on the rooftop to meet the household demand. Cultivation practices of some of the medicinal plants are described in this chapter.

Tulsi

Tulsi or basil is considered to be a sacred plant with religious importance. It is grown in homes as an aromatic perennial shrub and used for medicinal purpose. Tulsi possess antimicrobial and antiviral properties with capacity to purify the air. It can be grown up to an altitude of 2000 m above mean sea level. This plant can be grown in pots and in home gardens. The leaves and twigs of the plant are used for medicinal purpose. The fragrant leaves and flowers are used in the form of tincture, tea or decoction for curing cold & cough, stomach disorders, skin diseases, etc. The plant is also rich in antioxidant, vitamin and calcium. There are two types of tulsi viz. green type and purple. It can be planted in the pots or in the beds.

Plant propagation refers to the process of increasing number of plants of a cultivar. Plant propagation is of two types viz. sexual and asexual. Sexual propagation is done by seeds, whereas asexual plant propagation is done by vegetative means such as stem/root cuttings, slips, corm, bulbs, rhizomes, grafting, budding, layering, etc. Good quality seed or planting material of established crop varieties should be procured from authentic source to get desired result. The seed should be uniform in size, free from disease infestation, possess good vigour and having good viability. The quality of the seed is decided based on germination percentage. Seeds can be directly sown to raise a crop or seedlings are raised in nursery beds, which are transplanted later to main plot.

Seedlings can be raised in nursery beds, poly bags or pro-trays. The nursery beds are usually kept one meter wide, convenient length and of 15 cm height. The soil of the bed is prepared by addition of well decomposed bulky organic manure, sand and garden soil in equal proportion. The beds have to be disinfected by exposing the soil to sun (solarisation) and addition of neem or karanj oil cake. After sowing the seeds in the bed, those are covered with straw, leaves or compost to protect the seeds from birds and to conserve moisture in the soil. It also helps to maintain the temperature for quick germination. The seeds are sown in lines on the bed.

Fruits and vegetables grown in kitchen garden or in the field can be preserved in various forms like juice, squash, puree, pickle, jam, jelly, murabba, paste, ketchup, sauce, etc. for year round consumption. Seasonal produce of vegetables and fruits can be preserved through various methods for consumption at a later time.

Juice

Fruits like pineapple, mango, orange, lemon, etc. can be used to prepare juice, squash and other ready to serve beverages. Beverages can be prepared by following various steps. The fruits are washed thoroughly and pat dried with clean cloths. Then the peels are removed wherever necessary. Peeling can be done by hand or by knife. The juice is extracted by using juice extractor or by netting. The extracted juice is then strained using a muslin cloth or mosquito net. To enhance the taste and shelflife, the juice is mixed with sugar syrup. The sugar syrup is prepared by dissolving sugar in water and boiling it. After the syrup is ready, it is allowed to cool and strained through muslin cloth. Then the extracted juice is added with the syrup and citric acid. Preservatives like potassium meta-bisulphite or sodium benzoate is added for storage of the juice. If necessary, essence can be added @ 2 ml/litre of juice. The juice is to be stored in a narrow mouth bottle by leaving a head space of one to two centimetres. The cap of the bottle is to be sealed with wax.

Potted Plants

In urban areas, scarcity of space compels the dwellers to take up gardening on rooftop, terrace, balcony or small space adjacent to the house. Usually, plants are grown in pots or containers for rooftop gardening. Big size pots with diameter of 30 cm or more are required for growing rose plant. It is necessary to prefer tall pots to obtain appropriate growth of the plant having deeper root system. Now-a-days, pots of different materials such as clay, cement and plastic are used for growing potted plants. Usually, clay pots are better than plastic pots as clay is slow in transfer of heat thereby maintaining the root zone cooler. Of course, plastic pots are lighter and suitable for use on the rooftop as those put less load on the building structure. Light coloured plastic is preferred to dark colour as those generate less heat. Although heavier, cemented pots are more durable than earthen or plastic pots. The pots should have adequate drainage facility with holes in the bottom. Besides, a layer of gravel or medium-size stone of one-inch thickness are to be placed at the bottom of the container to facilitate drainage.