eChapters

Annual flowers are a group of herbaceous plants which grow from seeds, produce flowers, set seeds and complete their life-cycle within one year or one season. They provide a beautiful display of colours in the garden. Whether it is a small home garden or a big public garden, it is incomplete without beds of annual flowers. They enhance the decorative value of a garden within a short span of time. At their blooming time, one feels elated when a rain of beauty drizzles in the garden.

Classification of Annuals

Based on season, the annual flowers are divided into 3 groups—winter season, summer season and rainy season.

Winter season annuals

This group includes a large number of seasonal flowers. The important ones are acroclinium, agrostemma, amaranthus, anchusa, annual carnation, annual chrysanthemum, antirrhinum, arctotis, bells-of-Ireland, brachycome, calceolaria, calendula, campanula, candytuft, celosia, China aster, cineraria, clarkia, cornflower, daisy, delphinium, dianthus, dimorphotheca, echium, eschscholzia, gazania, godetia, helichrysum, helipterum, hollyhock, gypsophila, limonium, linaria, linum, lupin, marigold, matricaria, mesembryanthemum, mignonette, mimulus, myosotis, nasturtium, nemesia, nicotiana, nemophila, nigella, pansy, petunia, phlox, pimpinella, poppy, rudbeckia, salvia, saponaria, scabiosa, schizanthus, senecio, stock, sweet alyssum, sweet pea, sweet sultan, sweet william, venidium, verbena, viola and wall flower.

Climbers can be used to break the bareness of long walls, soften posts, frame doors and windows and beautify window boxes. With a fence or trellis, they can be used for screens, making a background for flower garden or quickly turning an ordinary porch or patio into a private, shady living centre. Some slower growing climbers are useful as container plants for patios. On the down side, most vine species have the potential to become invasive, spreading to areas where they may not be desirable or becoming too large for the intended area.

Types

Climbers are characterized as three types based on how they cling to a support. The kind of support needed depends on whether the Climbers cling by twining stems, orby specialized structures such as tendrils, adhesive disks and aerial roots. Climbers with twining stems wind around a support as they grow (Fig. 5.2). Examples of plant with twining stem sinclude bitter sweet, wisteria and trumpet creeper.Tendrils resemble thread like stems that wrap around any structure they contact (Fig. 5.1). Examples of plants with tendrils include grape, pea, and cucumbers. Some Climbers have specialized structures for clinging to a support with a disk-like suction cup (Fig. 5.3). Examples include Boston ivy and Virginia creeper. Other Climbers cling by means of small, aerial roots that attach to rough surfaces such as mortar, wood, and tree trunks (Fig. 5.4). Examples include English ivy, trumpet creeper and winter creeper euonymus.

Shrubs are usually woody or semi-woody perennial plants; their branches arise from the base of the plants and grow up to the height of 3 to 4 meter. Many shrubs, which are more or less prostrate, make excellence ground flower. Availability of a large number of species & cultivars, a wide range of variation in shape & size of the plants, diversified types of leaves, growth habit, remarkable ranges of size, shape, colour of flowers & the variety of fragrance have made the shrubs as important garden plants. Several species of shrubs have unusually attractive colours.

Most of the shrubs are hardy & grow in all types of soil with little attention. Although some plants flower almost throughout the year, in most cases they are seasonal. A selection can be made in such a way that some plants in the shrubbery will be in bloom in any season of the year. Most of these plants are fairly quick growing and when vegetatively propagated, start flowering in the first year. Plants like Bauhinia acuminata (Kanchnar), Cassia alata (Candle Bush), Vinca rosea,which are usually grown from seeds also produced flowers in the first year.Shrubs can be classified into three groups according to the requirement of the sunlight for growth & flowering:

Bulbs

Floriculturists use the term “bulbous” to include a wide array of perennial plants that grow from underground organs, including bulbs, corms, tubers and rhizomes. Any plant described as bulbous will normally have a swollen root or stem or even leaves underground (Some orchids and other plants have swollen stems – above ground). Bulbs, corms, tubers and rhizomes are perennial plants organ that are part of a plant type called bulbous plants in which part of the plant has evolved into a below-ground storage unit where food created one year is used to nourish the plant in the next. They are valuable in the garden for many reasons. Spring bulbs appear early, before most perennials have started to grow again after the winter. They can also add color to containers when other plants are not ready to face the danger of frost. In summer, bulbous plants such as Alliums and lilies can provide stately interest, while autumn crocuses and tiny hardy cyclamen can cheer up the garden toward the end of the season. The purpose of the bulbous part of the plant is to store food for the plant parts that live above ground to enable the plant to survive adverse conditions. The leaf bases may resemble scales, or they may overlap and surround the centre of the bulb. A modified stem forms the base of the bulb and plant growth occurs from this basal plate. Roots emerge from the underside of the base, new stems and leaves from the upper side. Most true bulbs have their scales closely packed together such as Hyacinthus but some types, such as the Lily (Lilium), they are loose and swollen. Most popular bulbs have a papery skin, the tunic, whose function is to protect the tissues within. Some true bulbs such as the Lily do not have a tunic and are therefore, easily damaged by rough handling. Cardio crinums dies after flowering but other bulbs are perennial. Vegetative reproduction in true bulbs is by means of offsets called bulblets.

The term essential element was proposed by Arnon and Stout (1939).They concluded three criteria must be met for an element to be considered essential. These criteria are:

1.A plant must be unable to complete its life cycle in the absence of the mineral element.

2.The function of the element must not be replaceable by another mineral element.

3.The element must be directly involved in plant metabolism.

The number of elements considered essential for the growth of higher plants now varies from 16 to 20 or more, depending upon the definition of essentiality. Other scientists such as Nicholas (1961) believed that an element should be considered essential if its addition enhances plant growth even though it merely substitutes for one of the 16 elements that Arnon declares to be essential. For example, sodium can substitute in plant nutrition for some potassium and vanadium for some molybdenum, Nicholas would consider both sodium and vanadium as essential, but Arnon would not. On the basis of the criteria used, Arnon specifies 16 elements and Nicholas 20 elements as being essential for the growth of higher plants. Three other debated nutrients are nickel (urea transformations), cobalt (N₂ fixation) and silicon. These criteria are important guidelines for plant nutrition but exclude beneficial mineral elements. Beneficial elements are those that can compensate for toxic effects of other elements or may replace mineral nutrients in some other less specific function such as the maintenance of osmotic pressure. The omission of beneficial nutrients in commercial production could mean that plants are not being grown to their optimum genetic potential but are merely produced at a subsistence level.

Weed is a plant that is growing in the wrong place. Weeds have many mechanisms and characteristics that enable them to compete, having thick waxy cuticle leaves that can be resistant to some chemicals, fast reproduction methods, the ability to reseed in 6 week cycles and deep tap roots enabling the weed to survive in compacted dry ground conditions.

There are many reasons to control weeds in annuals/biennial and perennial ornamentals. Weeds compete with the plants by absorbing essential nutrients and water, or by blocking light or air circulation. Weeds dramatic reduce the growth of the plants. The greatest damage is often done when the weeds and ornamental plants are small. Weeds also interfere with harvesting by physically hindering. They lower flower quality further by harbouring insects, such as whiteflies, thrips mites, slugs, snails and/or diseases.

Growing under optimal conditions for the flower will reduce the ability of weeds to compete against the crop. Controlling humidity/ventilation, water, light, pH, nutrients and temperature all figure prominently in providing flower optimal conditions. A plant health strategy to greenhouse weed control contains three principal elements, prevention/sanitation, evaluation of water quality and using all controls available physical, cultural and chemical. Prevention and sanitation can include the use of mulches in orchidhouse weed control. Rice hulls, perlite, pumice, corn gluten meal bark, Penn Mulch - pelletized recycled paper and human hair have all been used for this purpose. Prevention also includes, eliminating air borne weed seeds from entering the greenhouse by screening vents and other openings and preventing perennial weeds from growing under foundations. A 1-3 meter weed free zone should be maintained immediately adjacent to the greenhouse.

Pruning is a regular part of plant maintenance involving the selective removal of specific plant parts. Although shoots and branches are the main targets for removal, roots, flower buds, fruits and seed pods may also be pruned. Pruning wounds plants, but plants respond differently to wounding than do animals. In plants, damaged areas are covered by callus tissue to close wounds. Another response to pruning occurs inside plants. Chemical boundaries form around wounded areas, walling off or compartmentalizing the wounds. Compartmentalization limits any decay that results from wounding, or from the natural death of branches. Use pruning techniques that minimize plant wounding and speed wound closure.

Lawn

The lawn is a plot of closely mowed grasses. It is composed of thousands of individual plants crowded and forced into a very unnatural growth habit. It is an integral part of the garden. It is basically an area of land planted between gardens covered with grass and other low lying plants.

Lawn is one of the most important features of a garden. A well kept lawn makes a garden look extremely beautiful. It looks like a beautiful green carpet amidst colourful flowers in a garden. Lawn can be called as turf, pitch, field or green depending upon its plantation and usage. Selection of lawn grass depends upon it usage and its season of plantation. Though a well maintained lawn requires a little of patience and care, the final results are always very beautiful and soothing. Scientific reports say that lawns reduce energy consumption through it soothing effects and the green grass prevents soil erosion as well as cut down noise pollution in the urban areas.

Any substance or mixture of substances intended through physiological action, for accelerating or retarding the rate of growth or maturation, or otherwise altering the behaviour of plants or the produce thereof are known as plant growth regulators. It does not include plant nutrients, trace elements, nutritional chemicals, plant inoculants and soil amendments.

Plant hormones are organic compounds other than nutrients, synthesize by plants and regulate plant growth and development. They are active in very low concentrations, produced in certain parts of the plants and are usually transported to other parts where they elicit specific biochemical, physiological and morphological responses. They are also active in tissues where they are produced. The term plant growth regulator is usually used to denote a synthetic plant hormone, but most of the synthetic compounds with structures similar to those of the natural hormones have also been called hormones. For instance, the synthetic cytokinin, kinetin is considered a hormone.

Ornamental pot plants should be potted in small pots according to the size of the plants. Any kind of pot/container which can hold medium and provide aeration is suitable. The most common container is the plastic or clay pots. Plastic pots should be preferred because it retains moisture longer than mud pots. Plants should not be disturbed frequently and re-potting done only when absolutely necessary.

Potting media

Different types of growing media may be used for ornamental pot plant cultivation, but it is crucial that it must retain a certain amount of moisture and be well draining. Different plants require different substrate in which they would thrive. Conditions of the plant experiences in nature should think before choosing the media. Tropical plants require more water naturally compare to subtropical and temperate ones. For irrigating with sprinkling can or hose, it is better to use materials that drain well and decompose slowly while for drip irrigation heavy potting material should be used. The most important thing is to match watering habits to the potting material. Growing conditions play a most significant role in deciding on a medium. If there is no problem in providing a constantly humid environment due to climate or if growing in a greenhouse, the moisture retention on thepart of media is less of a concern. Ambient temperatures play a role here, as well, as warmer temperatures tend to increase the evaporation of water and along with the drying rate of the medium. The personal tendencies and how much time might be spending to water plants is another significant factor in choosing a medium. The combination of potting materials that will work best for garden plants mainly on Plant structure and root structures:

Bonsai is a Japanese art form using miniature trees grown in containers. The first documented evidence of an oriental word for container planting emerged approximately 1600 years ago in China. Bonsai is a Japanese pronunciation of the earlier Chinese term pen zai. A bon is a tray-like pot typically used in bonsai culture. The purposes of bonsai are primarily contemplation (for the viewer) and the pleasant exercise of effort and ingenuity (for the grower). Bonsai is not intended for production of food, for medicine, or for creating yard-sized or park-sized gardens or landscapes. Instead, bonsai practice focuses on long-term cultivation and shaping of one or more small trees in a single container.

The practice of bonsai is sometimes confused with dwarfing, but dwarfing more accurately refers to research and creation of plant cultivars that are permanent, genetic miniatures of existing species. Bonsai does not require genetically dwarfed trees, but rather depends on growing small trees from regular stock and seeds. Bonsai uses cultivation techniques like pruning, root reduction, potting, defoliation and grafting to produce small trees that mimic the shape and style of mature, full-sized trees.

Bonsai can be created from nearly any perennial woody-stemmed tree or shrub species. Which produces true branches and can be cultivated to remain small through pot Some species are popular as bonsai material because they have characteristics, such as small leaves or needles that make them appropriate for the compact visual scope of bonsai. Some of the plants highly suited for making bonsai

Ikebana

Flowers are generally known as the symbol of beauty around the world. Many people stick flowers in vases to wreath their rooms, houses and other places. Japanese FlowerArrangement is essentially different from the Western style of flower arrangement. The western style involves symmetrical arrangement of flowering plants in a vase whereas, the Ikebana, which means “flowers kept alive”, is much more intricate, complex and asymmetric. This style of flower arrangement is one of the famous cultural traditions of Japan known around the world. Generally, all Japanese flower arrangement styles are lumped together as ikebana but we cannot say they are all the same. Ikebana is a disciplined art form in which nature and humanity are brought together. Though it is a creative expression, it has certain rules governing its form. The main rule is that all the elements used in construction must be organic, be they branches, leaves, grasses, or flowers. The artist’s intention behind each arrangement is shown through a piece’s colour combinations, natural shapes, graceful lines and the usually implied meaning of the arrangement. They arrange flowers to recreate nature in miniature to see individual flowers which have been left behind. Ikebana is like one of the ways to communicate with nature. Another aspect present in ikebana is its employment of minimalism. That is, an arrangement may consist of only a minimal number of blooms interspersed among stalks and leaves. The structure of a Japanese flower arrangement is based on a scalene triangle delineated by three main points, usually twigs, considered in some schools to symbolize heaven, earth and man and in others sun, moon, love & earth. The container is also a key element of the composition and various styles of pottery may be used in their construction. Over time, the ways and styles have changed but there is still the basic idea of ikebana remain same.

Plants are important to humankind not only economically, environmentally and industrially but also spiritually, historically and aesthetically, they sustain human life through direct and indirect gains by providing a wide range of products for survival and prosperity. Bio-aesthetic planning to a large extent is a product of the age. With the advancement in agriculture and increase in population, large settlements developed, marking the beginning of urbanization. More and more people moved to urban areas for comfortable life. Increasing human needs resulted in large-scale exploitation of natural resources, great reduction in forest cover and extinction of many species of flora and fauna. The extent of forest cover is a good indication of the health of the land. The large scale deforestation in recent decades has rendered the sensitive catchment areas and hilly areas particularly vulnerable to soil erosion. Professor Lancelot Hogben coined the term ‘Bio-aesthetic planning’ defined as planning of flora and fauna with the object of beautifying the piece of land (country). Bio-aesthetic planning is an aesthetic branch of Horticulture which deals with planting of ornamental plants in such a way that it creates a picturesque effect. It is a very fascinating and interesting subject. With the greater realization of environmental, ecological and socio- economic benefits of plants, scope of Bio-aesthetic planning has increased further. Bio-aesthetic planning can play important role in environmental amelioration of urban and industrial areas along with their beautification.

Landscape Gardening

Landscape gardening is an aesthetic branch of Horticulture which deals with planting of ornamental plants in such a way that it creates a picturesque effect. According to Chambers’ dictionary, the definition of landscape is the appearance of that portion of land which the eye can view at once and landscape gardening is the art of laying grounds so as to produce the effect of a picturesque landscape. Landscape gardening can be defined as the decoration of a tract of land with plants and other garden materials so as to produce a picturesque and naturalistic effect in a limited space. According to Bailey, Landscape gardening is the application of garden forms, methods and materials to the improvements of the landscape and the landscape in this connection is any area large or small on which it is desirable to develop a view or design. So landscape may or may not include plants.

Landscape gardening can also be defined as the beautification of a tract of land having a house or other object of interest on it. It is done with a view to create a natural scene by the planting of lawn, trees and shrubs. Landscape gardening is both an art and science of the establishment of a ground in such a way that it gives an effect of a natural landscape. It can be also defined as the imitation of nature in the garden. It can also be defined as improving of total living environment for the people. In light of all the foregoing definition landscape gardening can be defined more appropriately as art of creating gardens, parks and other green areas.

Landscape design seeks to create balance between living and natural environments in order to derive the greatest use and enjoyment from outdoor space. A landscape to a landscape designer is like a slab of marble to a sculptor or the insides of a home to an interior decorator; a landscape is the canvass on which the landscape designer crafts his or her masterpiece. Since the landscape gardening is the making pictures on the ground with plant and other material, landscape designer should be proficient in art, ornamental gardening, ecology and physiology. He should be an architect and engineer to appreciate the relationship between plant form, colours and buildings.

The term “low-maintenance” refers to a plant that does not require frequent maintenance such as regular watering, pruning, or spraying to remain healthy and to maintain an acceptable aesthetic quality. A low-maintenance plant has low fertilizer requirements and few pest and disease problems. In addition, low-maintenance plants suitable for India must also be adapted to or at least tolerate our poor, alkaline, sand or limestone-based soils. Both native and non-native species are included herein. Also, a variety of plants that are not commonly available in Indian nurseries or garden centres were intentionally included with the hope that increased demand will generate increased supply. Putting the right plant in the right place is of foremost importance in creating a healthy and successful low-maintenance landscape. However, this principle is dependent upon one’s ability to accurately select the right plant species for a given location. Common names are often misleading and sometimes more than one plant species may be referred to by the same or similar common name.

Table 19.1: Reference Guide for Landscape Plants.

India is bestowed with diverse agroclimatic zones which aids in the cultivation of large number of commercial flowers like rose, gladiolus, chrysanthemum, tuberose, jasmine, marigolds, orchids, lavender, lily, anthurium, gerbera, potted plants, cut foliages, bedding plants etc. In floriculture trade, value addition takes place at every step to create a novel product and to cater the demand of heterogeneous consumers. In the international floriculture trade, besides floriculture and pot plants, many other value added products include artificial colouring of the flowers to create novelty, aqua-packing for better presentation and attraction, three dimensional window packing of flowers for greater visibility, garland, venis, bouquets, flower arrangements etc.

Rose
Rose is a perennial erect shrub, climber or trailing plant  belonging to the genus Rosa within the  family Rosaceae. The plants bear large and showy flowers of white, yellow, red, pink, orange and various shades. Most of the species are native to Asia.

Valuable Genetic Resources

Annual plants complete their life cycle within the space of one year are called annuals. They have multipurpose uses like as cut flowers, a wealth of bloom through out the summer and early autumn months; as component in herbaceous border, to make colour scheme, for window boxes and porches, as pot plants in green house or conservatory, for edging, for drying and herbal medicines.

Herbaceous perennial flowers complete their life cycle in more than a year and usually bloom during a specific time period every year during the growing season. These flowers are hardy and herbaceous. They are popular in their dried form for beautiful and exotic dried flower arrangements. Besides, perennials are used as ground covers, mixed with annuals, grown as potted plants and used as accents or specimen plants. Some important perennial flowers are Baby’s Breath, Bells of Ireland, Blue Globe Thistle, Carnation Flowers, Daisy Flowers, Flax, Hibiscus, Hollyhock, Iris, Ladys Mantle,Larkspur, Lavender, Lily Flower, Monkshood, Pearl Everlasting, Rose Flowers, Statice, Sunflower, Yarrow.

Shrubs are group of plants having woody stems and multi-branching from the base of the plant. These plants are useful to build up the framework of the planting scheme for screens, ground covers, flowers and hedges. They vary in blooming time, colour, size, growth habit, fragrance as well as situations.

Foliage or house plants are mostly those with attractive foliages or flowers and are able to survive and grow under indoor conditions. They are mostly used for interior decoration or interior plantscaping. Foliage plants of world’s importance include Aglaonema, Dieffenbachia, Dracena, Epidendrum, Ficus, Peperomia, Philodendron, Sansevieria, Syngonium, Schfflera, ferns, Anthurium, Codiaeum. Florida shares more than 55% in foliage industry.

Aquatic plants are essential to maintain water balance. They also keep out the dreaded algal bloom. Aquatic plants absorb the minerals and carbon dioxide in the water. Pond plants are classified into four groups: oxygenators, marginals, floaters and aquatic. Oxygenators such as buttercup and water violet supply lots of oxygen in the water. Marginals are ornamental pond plants and planted in pots or baskets in the edge of the ponds to provide space for fishes or frogs, e.g., Primula. Floaters like water hyacinth help in keeping algae at bay and also provide enough cover for tadpoles or small fish.

Bulbous plants are herbaceous perennial or biennial ornamental plants which produce fleshy storage organs including true bulbs, corms, tubers, rhizomes and tuberous roots. These underground organs have capacity to store moisture and nutrients are utilized by bulbous plants to survive winter or other adverse conditions such as summer drought and heat in a dormant state.

Cacti

Cacti belong to the family Cactaceae comprising of 130 genera and 2000 species and bear a complex organ, a cushion like structure spirally arranged over the stem called ‘areoles’ from which spines, hairs, flowers and shoots develop. In tribe, Pereskieae, the plants are leafy bushes or shrubby and characterized by areoles on the stem and by the typical flower borne in clusters, e.g. Maihuenia, Pereskia and Rhodocactus.

India is bestowed with varied agroclimate ranging from mild tropical zones to alpine zones and congenial for several types of ornamental plants in different seasons. Worldwide China and India have large total areas under flower cultivation. Among top ten cut flowers, rose ranks the first position followed by spray chrysanthemum, tulip, lily, gerbera, cymbidium, freesia, chrysanthemum, anthurium, alstroemeria and carnation. In view of rapid changing global competition, diversification into lesser known potential new ornamental plants play key role in fetching premium prices. Most of the potential exotic ornamentals plants have been introduced from Australia, South Africa, Israel, New Zealand and Eastern USA. There are about more than 60 types of new ornamentals reported to be hold potential for commercial importance. All these newly introduced ornamental plants require the following stages of research and development.

Orchids comprise the largest family of flowering plants with 25,000 to 35000  species belonging to 600-800 genera. They are prized for their incredible diversity in the size, shape and colour and attractiveness of their  flowers and high keeping qualities even upto 10 weeks. In the international trade, among   top ten cut flowers, orchids rank the sixth position and among orchids Cymbidium ranks the first position and in floricultural crops it accounts for 3% of the total cut flower production. In India, it comprises 140 genera and 1300 species which grow upto an elevation of 5000m. Indian terrestrials are located in humus rich moist earth under tree shades in North Western India.  Western Ghats harbour the small flowered orchids. Epiphytic orchids are common in North eastern India which grow upto an elevation of 2000m from sea level.

Aerides

Aerides consists of more than 60 species. These are monopodial epiphytic orchids grown on trunks or branches of trees.  The stems are round, leafy and branched with aerial roots. The strap leaves are thick, leathery and bilobed. The inflorescence is auxillary and drooping. The flowers are many and 2cm in diameter closely set on the inflorescence and generally fragrant.

Gladiolus saundersii

Flowers attract both young and old alike. They are associated with mankind from the dawn of civilization. These have become an integral part of human life in the modern era.
 
The Indian floriculture industry has been shifting from traditional flowers to cut flowers and dry flowers for export purposes. The liberalized economy has given an impetus to the Indian entrepreneurs for establishing export oriented floriculture units under controlled climatic conditions. About 60,000 hectares, area is under floriculture at present. During nineties, increasing demands for flowers in world market was coupled with production technology available abroad for high quality flowers.

Preserving flowers dates back to earliest recorded history. The first evidence of use of dry flowers was when the bones of a pre historic man discovered in the Middle East were found with a mantle of delicate wild flowers. The pollen grains that remain indicated specific flowers that were used. During ancient times people used to freshen or enliven their rooms with fresh sweet smelling flowers. In the sixteenth century, when the Elizabethan Age was coming to a close, it was considered fashionable to wear silk flowers as part of one’s attire. These days flowers are dried and are versatile in their use. They supply us with food, medicines, ornaments and adornment. Flowers became essential for a fashionable appearance. Each civilization developed its own interpretation of flowers. Pressed flower art became popular in Victorian times. The Japanese use pressed plants and colorful papers to create Oshibana Art.

3.1 Indian Floriculture Industry

Indian floriculture industry has been shifting from traditional flowers to cut flowers and dry flowers for export purposes. The liberalized economy has given an impetus to the Indian entrepreneurs for establishing export oriented floriculture units under controlled climatic conditions. About 60,000 ha area is under floriculture at present. During nineties, increasing demands for flowers in world market was coupled with production technology available abroad for high quality flowers. This encouraged some entrepreneurs to establish export-oriented units in Hyderabad, especially for the production of long stem rose by importing cultivars and adapting green house technology.

4.1 Dry Flower Garden

Contrary to popular assumptions, the area required for producing large quantity of dried flower material need not also be large. However, the garden should be planned so as to harvest dry flowers all year round by planting evergreens, deciduous plants, annuals and perennials. Rows of flowering plants should be planted in the dry flower garden. Herbs are easy to grow, and can be planted in pots and window boxes. They are useful in transforming simple cooking into gourmet dishes, while also lending their delicate scents to a room when dried and for use in wreaths, pot pourri and arrangements. Gardens for dry flower production should include a wide selection of weeds, grains, seed-heads and pods. Flowers such as hydrangeas, zinnias, roses, dahlias and sunflowers and a selection of line flowers such as golden rods, statice, gladiolus, larkspur and delphinium can also be grown as these will provide a greater variety of flowers needed in flower arrangements.

Various methods are employed to dry flowers and foliage. The method adopted for drying depends largely on the character of the plant, that is to say whether the plant is glabrous, succulent or not succulent, hardy or delicate in nature. The suitable method for drying any given plant has to be studied elaborately. However, the different methods of drying are described broadly in this and consequent chapters.

Pressing Flowers

One of the most popular methods for drying flowers is to put them under pressure, to remove the moisture out while leaving the color of the flowers and structure intact. There are several ways to apply pressure to flowers. The easiest method is placing them in heavy books and allow for drying. Flower presses can also be used. Some guidelines for pressing flowers in the traditional way are explained below:

Drying by Embedding

A desiccant is simply a substance with a high affinity for water which can be used as a drying agent. Embedding the flowers in a granular, desiccating material is probably the most commonly used method and many consider it the best all around method. Several materials are used as drying agents. All the agents used vary in cost and in the results they produce. It is important to use the correct procedure when covering the flowers so that their form is maintained. Most well known is silica gel, but also clean dry sand can be used. Usually an airtight container is used; the flower heads are placed in the drying mixture face up, and very carefully covered with the mixture. The container must be kept closed during the drying process. After 4-14 days, depending on the thickness of the flower, the flower will be dry.

Microwave Oven Drying

Microwave drying is quick and relatively simple. It takes only a few minutes and provides dried flowers that look fresher and more colorful than obtained by other methods. Flowers with thick petals like magnolia are not suitable for drying in microwave. Since flowers vary in moisture content, texture and density, care should be taken to use the same sized flowers from one species at a time. It has been found that many flowers held almost true to life color and form using this process. Brightly colored flowers are best to dry. Flowers such as lilies, roses, violets, zinnias, and dahlias work well with this process.

The process for freeze dried flowers began in 1989. Freeze drying was first used by the Peruvian Incas of the Andes, who stored their food on the heights of the Andes. The ancient Incas were the first to learn the benefits of sublimation. They discovered that when they dried food at high elevations, the results were better. Even though the food would freeze, it would dry well if left exposed to the sun. The reduced pressure at high elevation, combined with the dry air and energy from the sun, had caused sublimation to occur.

Bleaching is essentially whitening or decolourizing. It is an important step in the processing of dry plants. It involves chemical processes that can change the ability of colour bodies to absorb light by changing their degree of saturation (Robson, 1967). This chemical action removes the discolouration occurring during the dehydration phase of preservation of plants. It allows the effective use of dyes for colouring. Bleaching agent is a material that lightens or whitens a substrate through chemical action. To reduce the processing costs, multistage bleaching is suggested. In this method, both oxidative and reductive bleaching chemicals are used.

The major drawback of dried arrangements and other dry flower products is that they are dull and lack the brightness of fresh flowers. To overcome this problem, flowers are bleached and dyed. This enhances the visual appeal of the product. Both chemical and natural dyes can be used. Squires (1971) reported on the use of various types of paints to colour dried foliage and flowers using brushes or by dipping and spraying. Enamel paints, interior paints, poster paints and tube paints could be employed for this purpose. Tampion and Reynolds (1971) explained the three ways by which dyeing can be carried out for fresh flowers. They are as follows:

One of the important aspects of dry flowers is the pleasure of gathering flowers and grasses to make wonderful dried arrangements. The only drawback is that the original colors fade and the floral arrangements can end up looking like a bunch of straw. To enhance the colors of dried flowers, dyeing is advocated. While coloring ferns or small leaves, it is better to work on an aluminum foil or waxed paper so it can collect extra paint, which can be used on another leaf. Leaves should be lightly brushed, and never saturated with paint. The painted specimens are placed on the waxed paper or on a computer paper to dry. Newsprint should not be used.

Skeleton Leaves

Skeleton leaves are semi-transparent leaves, also called fossil leaves. They are prepared by soaking the fresh leaves in bleached water and then by hand rubbing the soft green flesh from the network of veins. The leaves can be then dyed to variant colors to give them a beautiful and pleasing appearance. Although delicate by nature, they are actually sturdy and can easily be glued to a variety of surfaces. They come in several colors and sizes to meet a complete line of crafting needs. The delicate beauty of these leaves is sometimes meant to capture life, hope and memories. These delicate, gorgeous skeleton leaves are a perfect accent for all craft projects. They make a beautiful and elegant statement when they adorn your wedding invitations. They work surprisingly well on gift tags, greeting cards, scrapbooks, collages, papermaking, stenciling, and stamping. They are perfect for decorating bridal bouquet, wedding reception table, candles, and wedding favors.

Flowers blooming in a garden can be preserved by drying them for use in arrangements, decorations and various other applications. Natural dry flowers can be annual or perennial. Some of the important annuals used for dry flower making are described below.

14.1 Annual Flowers

Plants classified as annuals are those that complete their life cycle within the space of one year. Annual flowers are versatile and sturdy. The annuals have many uses in landscaping. Annual flowers are beautiful and garden lovers tend to preserve these flowers throughout. They dry these flowers and store them for use in several beautiful dry flower arrangements.

Perennial Flowers

Perennial flowers have a life span of more than one year and usually bloom during a specific time period every year during the growing season. These flowers are hardy and herbaceous. They need less maintenance, less water, and fewer pesticides than annuals. Perennials are easily used as ground covers, mixed with annuals, grown in containers and used as accents or specimen plants. Many perennials are short bloomers and are best mixed with others that bloom at different times or included with other landscape plants. These flowers are treasured by gardeners as heirloom plants and have proven themselves to be hardy enough to withstand weather and climate extremes. They are treasured in their dried form for beautiful and exotic dried flower arrangements.

Dried Grasses

Grasses are easy to collect to dry and use. When the seed-heads have formed, the grass is cut off just above the soil using a sharp knife. They are allowed to lie in a thin layer in the sun for a day or two, turning them over a few times. They should not be allowed to get too damp. After they are dried they are put into a plethora of uses. Bunches of dried grasses can make a wonderful addition to any home or office.

Dried Leaves

Leaves are dried or preserved to capture the beauty of spring and hold it for a long time. Dried leaves are beautiful when used in any decoration. There are several preserving techniques that help to enhance the prized collection of leaves well. Drying leaves is an age old tradition. Leaves were dried to preserve them. The leaves were picked for their medicinal qualities, fragrance, or to be used as spices and for their decorative value. Leaves can be preserved by various ways: 

Dried Petals

Many types of dried petals are used for making pot pourii eg., land lotus petals, rose petals, mahogany petals, lily petals and lotus petals. Flowers are dried for everlasting beauty. They add an elegant touch to the room and are dried for everlasting beauty. Preserving blooms is a wonderful way to preserve memories and enjoy long lasting splashes of color. Many flower parts are used in dried form. A vibrant and thrilling range of dried petals are used to embellish greeting cards, folders, books, and other personal belongings.

Dried Fruits and Pods

The enchanting beauty and usage of fresh pods or fruits need not end up with the season. They are dried and preserved for years. A colorful array of choice dried fruits are very popular in dried arrangements. There are numerous dried fruits and pods used in potpourri and dried flower arrangements.

Artificial flowers are a great source of handmade decorations. Beautiful handmade artificial flowers are suitable for banquets, weddings or to decorate any room in the home. They are generally made of paper or cloth and in a variety of colors. They come in either a bouquet form or can be ordered as individual stems. There are different kinds of artificial flowers including silk flower, latex flower, flowers made from natural leaves and embroidery flower.

Introduction

Floral arrangement is the art of selecting and organizing flowers and foliage according to the elements and principles of design in order to attain a pleasing and interesting design. Arranging flowers is an artistic activity and a way to express oneself creatively.

21.1 Flowers and Foliage

Successful floral arrangement begins with plant materials that have been properly handled and prepared. Beauty and good composition of an arrangement is not determined by the cost or rarity of plant materials used, but by the way they are selected, cared for and arranged. The plant material has to be handled carefully, handling only the stems. Properly dried, bleached and dyed flowers, foliage and accessories can be arranged following the principles for dry flower arrangement.