eChapters

Factories are the backbone of industrial growth for economic prosperity of any nation especially for developing countries like India. There is usually huge area available in the factories but the whole area is not covered under construction or used. The vacant spaces of the factory premises are ideal for development of gardens. Moreover, plantation of trees and development of greeneries are now compulsory in industrial areas as per laws for the purpose of environmental amelioration.

Purpose

Gardens at the factories and other industrial places are different from the normal ornamental gardens. These gardens are generally less intensive in nature. The main function isto fulfill dual purpose i.e., beautification and minimizing environmental pollution. Selection of plants should be evergreen trees, free flowering perennials tolerant to air pollution.

Scope

There are large open spaces available within the campus of factories. These are generally located along the boundary wall, inner open areas and other unutilized spaces. As a whole, there is ample scope for development of gardens and other kind of plantation.

I. General information

1. Lalbagh garden is located at Bangalore
2. Founder of Lalbagh garden is Hyder Ali and his son Tipu Sultan
3. Total area of Lalbagh garden is 50 hectares and developed during 1760
4. Brindavan garden is located at Mysore
5. Government botanic garden, Ooty was established during 1848
6. Total area of Ooty botanic garden is 20 hectares

1. Achabal Garden, Anantnag, J&K

Also known as “The Place of the Princes”.

It was the work of Noor Jahan and built in 1620.

It was known for its gushing water.

The design was an adaptation of the traditional Persian Char Bagh.

It has three terraces with central water stream which is largest spring in Kashmir.

There are two walkways on either side of the stream.

It has varieties of fruit trees and surrounded by trees of Cheenar.

1. Introduction

The status of mechanization in India is at a very low level for horticultural crops. The farmers usually go behind the use of traditional methods for different farm operations (Fig 1) and practices for cultivation of horticultural crops, their handling, storage, and processing. This results in less yields, high cost of cultivation and high crop losses from harvesting till processing. The use of different available hand tools, machinery and hi-tech technologies in the production and processing of the crops will lead to increased yields and decrease in losses to a great extent (Mandhar, 1999).

Farm mechanization plays a crucial role in the evolution and efficiency of f loriculture, the cultivation of flowers and ornamental plants for gardens and f loristry. The introduction of advanced machinery in floriculture enhances productivity, reduces labor costs and ensures the consistency and quality of f loral products. Mechanization encompasses various stages of the floriculture process, including soil preparation, planting, irrigation, pest control, harvesting and post-harvest handling. Equipment such as automated seeders, transplanters greenhouse climate control systems, drip irrigation setups and harvesting machines streamline operations, leading to higher yields and reduced manual labor. Moreover, mechanized techniques facilitate precision farming, enabling growers to optimize resource use and minimize environmental impact. The use of drones and sensor technologies allows for meticulous monitoring of crop health, ensuring timely intervention and reducing losses due to pests and diseases. By incorporating mechanization, floriculture can meet the increasing global demand for flowers and ornamental plants while adhering to sustainable agricultural practices. Additionally, the adoption of mechanized processes supports the scalability of floriculture businesses, making them more competitive in the market. Thus, farm mechanization is instrumental in transforming floriculture into a more efficient, sustainable and profitable sector, aligning with modern agricultural trends and consumer expectations.

There are several types of features and structures of the gardens. The design, material and placement varies from one type of garden to others. However, there are some basic requirements in every type of gardens. Common features and structures of the gardens are described hereunder for providing some basic information.

Boundary

Material and construction of the outer boundary is to be considered depending upon the size and type of garden. Protection, permanency and cost of construction are the main factors. It should be well designed and an architectural show piece co-relating with type and design of the garden. Ornamental creepers are planted along the boundary wall and trained over the same for further beautification purpose.

Pteridophytes such as ferns belonging to several families, selaginellas popularly called ‘club mosses’ belonging to Selaginellaceae and the Lycopods which resemble both these, belonging to Lycopodiaceae are shade loving plants adapted to cool and moist or hot and humid ecosystems of tropical to temperate climates. They are mostly epiphytic or lithophytic and are grown as foliage ornamentals in a fernery or in shaded areas in gardens. Many are favoured indoor plants.

Popularly grown ferns, lycopods and selaginellas of gardens are listed below:

Adiantum capillus-veneris

Adiantaceae

Common Maidenhair fern

Plants are shade loving bushy lithophytes and have delicate looking thin black stems carrying light green oblique-ovate fronds. They are pot grown as ornamental foliage plants.

Adiantum decorum

Syn. Adiantum raddianum

Adiantaceae

Maidenhair fern

1. Ornamental ferns

Adiantum capillus – Maiden hair fern

Asplenium nidus – Bird’s nest fern

Cheilanthes argentea – Silver fern

Davallia bullata – Squirrels foot fern

Nephrolepsis aureum - Boston fern

Polypodium aureum – Hare’s foot fern

Pteris cretica – Brake/ Ribbon fern

Drynaria quercifolia -Oak-leaf fern / basket fern

Definition: Ferns are flowerless plant that has feathery or leafy fronds. These are reproduced by spores released from the undersides of the fronds.

It is a member of a group of about 10,560 known extant that differ from mosses by being vascular (i.e. having water-conducting vessels). Like other vascular plants, they have branched stems and leaves.

A wide range of beautiful plants exist among ferns which are very popular worldwide. Ferns are grown for their beautiful foliage and their gracefulness. Most of the house ferns are native of tropical regions and are ideal for indoor planting, as they can grow well under shaded or semi-shaded situations. Many species of ferns are native to India. Some of them can be easily grown while others are much difficult, but can be grown well preferably under suitable growing media and proper management.

14.1 INTRODUCTION

India is conferred with a varied agro-climatic condition which are highly favourable for growing a large number of horticultural crops such as fruits, vegetables, root tubers, ornamental, aromatic plants, medicinal herbs, spices and plantation crops like coconut, areca nut, cashew and cocoa (Ministry of Information and Broadcasting, GOI, 2008). India is next only to China in area and production of vegetables and occupies prime position in the production of caulif lower, second in onion and third in cabbage in the world. After achieving food security, it is being increasingly felt that India needs to achieve nutritional security for betterment of its population. In achieving nutritional security fruits and vegetables play an important role (Ganeshmurthy et al.2011). Although we have achieved good production levels of fruits and vegetables, the present production of fruits and vegetables may not be enough to meet out the demand. To feed the ever-increasing population in a sustainable way a tremendous effort will have to be made to increase the production of fruits and vegetables both horizontally and vertically through a rational and balanced use of production inputs, specially the mineral fertilizers. Soil fertility is a key factor for successful crop production, and it is a measure of capacity of soil to supply plant nutrients. The importance of soil fertility and fertilizer management is being increasingly recognized in all countries recently to meet the demand for food and other agricultural raw materials. Intensive use of fertilizer, intensive cropping with high yielding cultivars have increased the food production and reduced the food shortage, but it has also brought in numerous problems of soil fertility, soil and water pollution. On the other hand, fast depletion of nutrients due to over exploitation, a wide-spread deficiency of N, P, K and S coupled with micro-nutrients deficiencies especially Zn and boron has been noticed in many soils. Further deforestation, shifting cultivation, burning of trees, bushes, grasses and cow dung, soil erosion, soil degradation, nutrient losses, excessive fertilizer application, leaching losses etc., have aggravated the depletion of soil fertility status. It is being realized that the future of Indian agriculture is closely related to scientific management of soil fertility along with judicious and efficient use of fertilizers. Soil fertility and nutrient management is one of the important factors that have a direct impact on crop yield and quality. Soil test reports help in determining soil organic matter, pH, electrical conductivity, cation exchange capacity, and levels of important macronutrients (phosphorus, potassium, calcium, magnesium) and micronutrients (boron, zinc, etc.). These reports also help estimating lime or sulphur application rates to increase or reduce soil pH, respectively. Maintaining a soil pH between 6.0 and 7.0 is recommended for most crop rotations that include vegetable crops.

Fertilizer is a substance of natural or synthetic origin, applied to soils or to plant tissues (usually leaves) for the supply of one or more nutrients essential to the plant. It is classified in two types, inorganic fertilizers and organic fertilizers. Both the fertilizers play major role to the crops if they are properly and appropriately applied. To obtain maximum benefits, it is important to apply fertilizers at an appropriate time, amount and in a precise manner. The method of fertilizer application should be selected appropriately taking into consideration the age and stage of crop plants, their root extensibility, type of orchard management, kind and amount of fertilizers to be applied. The fertilizers should be given over the area of crop plants, where their active roots are spread. In fruit trees, fertilizer should be given in restricted area i.e. in the surrounding area of about 1 to 1.5 m away from the trunk of the trees in active root zone.

When to apply the fertilizers?

Majority of the crops require nutrients at different stages like growth & development, flowering and fruit setting time. In fruit crops, stages like new flushes emergence, floral buds differentiation and fruit development require more nutrients. Time of application of fertilizers may also vary depending on types of fertilizers, need of the crops, soil and climate.

Introduction

Fertilizer efficiency is a critical factor in floriculture, the specialized branch of horticulture focused on the cultivation of flowers and ornamental plants. Floriculture is a highly intensive agricultural practice that requires precise nutrient management to ensure optimal plant growth, vibrant blooms and high yields. The efficiency of fertilizer use in this sector not only influences the quality and quantity of floral products but also has significant implications for economic viability and environmental sustainability.The global floriculture industry is expanding rapidly, driven by increasing consumer demand for f lowers and ornamental plants in both domestic and international markets. This growth necessitates enhanced agricultural practices to meet market needs while maintaining sustainable production systems. Efficient fertilizer use is paramount in this context as it directly affects the productivity, profitability and environmental impact of floriculture operations. Fertilizer efficiency refers to the ability to maximize plant nutrient uptake while minimizing waste and environmental degradation. Achieving this balance is crucial for sustainable f loriculture, as it helps reduce input costs, enhances plant health and mitigates adverse environmental effects such as nutrient runoff and soil degradation.

The common fig, (Ficus carica L.) is a fruit of warm temperate zone. It is one of the oldest fruits known to man and is mentioned by well known Greek writers Homer and Plato. Mention about this fruit is in the earliest chapter of Bible. Figs belong to family Moraceae, which include many tropical fruits and ornamental species. The fruit is known botanically as ‘syconium’ in which the flowers are borne on the inner walls of a hollow receptacle. It is one of the most salt and drought tolerant amongst fruit trees. Fig is a moderate sized deciduous tree in subtropics but performs as evergreen in tropics. Branches are irregular, shoots develop at base of trunk, leaves are very broad, ovate and long stalked. Fruits mostly long stalked, pear shaped with a velvety or glabrous skin, yellow, brown, purplish or black in colour. 

Filler flowers play an essential role in floral arrangements by providing volume, texture, colour balance and supporting elements around major cut flowers. This chapter presents several commercially useful filler crops and their production technologies. It covers crop establishment, climate, soil, propagation, nutrient management, irrigation, crop regulation, pest and disease management, harvesting, drying and postharvest handling. Crops such as Ammi and other seasonal fillers are discussed from a commercial production perspective. The chapter also considers yield, stem quality and market requirements, demonstrating how filler crops can diversify farm income and create profitable opportunities within modern floriculture enterprises.

Floral decoration in India has got a historical background spreading over different eras. Admiration of natural beauty, plants and flowers were part of civilization process. Many evidences are there in the paintings, carvings on wall of caves, temples, mosque besides literatural references that flowers were in use in many forms since time immemorial. Every religion, culture, rulers and regimes had great influence on the use of flowers.

At present, flowers are integral part of our daily life. We use flowers in various ways and for many purposes. Loose flowers are used for worship while garlands for decoration purpose during social, institutional, official functions etc. In addition, cutflowers in the form of bouquets are very common in use. Arrangement of flowers in the vase, bowl or any other container is displayed extensively for interior decoration. At present, placing flower vase is very popular in houses, corporate offices, institutes, hotels etc. and is a well established practice.

A floral formula is a numerical representation of various parts of the flower. Such notations use numbers, letters and various symbols to convey significant information in a compact form. They may represent the floral form of a particular species, or may be generalized to characterize higher taxa, usually giving ranges of numbers of organs. It also depicts the symmetry, interrelationship of various floral parts, unisexuality as well as bisexuality in the flower.
Floral formulae were developed at the beginning of the 19th century (Prenner et al., 2010). The first authors using them were Cassel (1820) who first devised lists of integers to denote numbers of parts in named whorls; and Martius (1828). Grisebach (1854) used 4-integer series to represent the 4 whorls of floral parts in his textbook to describe characteristics of floral families, stating numbers of different organs separated by commas and highlighting fusion. Sachs (1873) used them together with floral diagrams, he noted their advantage of being composed of “ordinary typeface”.

Introduction

Flowers provide opportunity to convert them into exquisite value added products directly from fresh flowers like garland, bouquet, flower arrangements or after drying the flowers making different dried flowers products like pot pourri, wreath, painted gourds or after processing like rose water, gulkand, gulroban, perfume, essential oil, insects repellants, cosmetics etc. Beside this a number of pigments like xanthophylls, carotenoids, luteins, anthocyanins etc. which have neutraceutical properties and pharmaceuticals compounds are also prepared from flowers. The value addition results in more acceptable quality products for the domestic and export market and hence ensure high premium to the producers. Moreover, value addition technology can help avoiding wastage during the glut period and farmers involved in the flower cultivation can earn better remuneration. Preparation of value added products helps in employment generation at producer level, wholesaler level or industrial level. It is a good source of income generation. There are various types of value added products which can be prepared either by practice or by obtaining training of making these products. The value added products can be classified into three categories namely:

World Trade Organization (WTO) is an international body which deals with the “Rules of Trade” between nations on the basis of the agreements negotiated and signed by most of the world’s trading nations. These agreements are essentially contracts that bind governments to keep their trade policies within predefined limits. The goal is to help producers of goods and services, exporters and importers.

The purpose of WTO agreement is to help free flow of trade, serve as a forum for trade negotiations and to serve as a dispute settlement body. There are 5 broad principles of the trading system followed under WTO:

Trade without discrimination

Freer trade, gradually through negotiations

Predictability, through binding

Promotion of fair competition

Encouragement to development and economic reforms.

Introduction

Floriculture, the branch of horticulture dedicated to the cultivation of flowers and ornamental plants, has gained significant attention and importance due to its multifaceted prospects and scope. It is a captivating blend of art and science, encompassing the nurturing of plants for aesthetic, commercial and even therapeutic reasons. From the meticulous care of delicate blooms to the strategic planning of vast floral displays, floriculture spans a wide spectrum of activities, each contributing to the beauty and functionality of our surroundings. From the meticulous care of delicate blooms to the strategic planning of vast floral displays, floriculture spans a wide spectrum of activities, each contributing to the beauty and functionality of our surroundings. This can range from the production of cut flowers for floral arrangements and bouquets to the cultivation of potted plants for indoor decoration. Whether it’s the striking colors of roses, the delicate petals of orchids, or the lush foliage of ferns, floriculture celebrates the diversity and splendor of the plant kingdom.

Floriculture  is  increasingly  regarded  as  a  viable  diversification  from traditional field crops due to increased per unit returns and increasing habit of “saying it with flowers” during all the occasions. All over the world, the floricultural sector is experiencing rapid changes. Opening up to the world, market  in  the  WTO  regime  paving  way  to  free  movement  of  floricultural products worldwide, globalization and its effect on income generation have all  contributed  to  increase  in  per  capita  consumption  of  flowers  in  most countries. Noticeable  feature  of  global  floriculture  is  the  development  and expansion of floriculture in non-traditional areas. Netherlands, Italy, Germany and  Japan  had  strong  tradition  for  growing  and  consumption  of  flowers. The  concept  of  commercial  floriculture  was perpetuated  across  the  world from those regions. New production centres are developing in Latin America, Africa and also in Asia to meet the demand of consuming countries and also to  expand  domestic  market,  commensuration  with  improved  economic conditions  these countries  provide  highly  qualitative  floricultural  products with low cost price which is finding a favourable place in markets of Western Europe, America and Japan. Emergence of new production centres has made floriculture  more  competitive  and  this  in  turn  is benefiting the  ultimate consumers.