eChapters

Modern garden designs are classified on the basis of utility, need, location and materials used. Nowadays, garden types are focused on issues contributing towards ecological balance, biodiversity, environmental moderation and sustainability as well as personal preference and taste. This has given new perspectives to roof gardening, rock gardening, home gardening, kitchen gardening, green belt development, traffic islands, avenue plantation etc. Further there is incorporation of alternative energy sources like solar systems, water harvesting, etc. A garden could be for entertainment or a place to relax for some people and for others, a productive kitchen or herbal garden is more important. Some common garden types are given below, where in it is also possible to combine elements of two or three different types to create something entirely different.

Gardenia (Gardenia jasminoides), commonly known as Gandharaj or Cape jasmine, is an evergreen ornamental shrub distinguished by its attractive, creamy-white and highly fragrant flowers. The flowers are important for garlands, floral arrangements, religious offerings and decorative uses. This chapter discusses its origin, distribution, genetics and botanical characteristics, including important cultivated forms. It explains climate and soil requirements, propagation, land preparation, nutrient management, planting and irrigation practices. Cultural operations necessary for maintaining healthy growth and flowering are also presented. The chapter covers major insect pests and diseases, harvesting, postharvest handling and yield. Its emphasis on fragrance, ornamental value and commercial flower production makes it valuable for floriculture students and growers

7.1 INTRODUCTION

Gardening is a practice of growing different kinds of horticultural crops in a particular land area as a part of horticulture either for consumption or sale, export, beautification etc. Basing on the crops grown, gardens are named accordingly, e.g., for raising vegetables, it is vegetable gardens; for fruit crops, it is orchard; for plantation crops, it is estate plantation; for ornamental plants, it is gardening and landscape etc. The history of gardening is not new. In ancient time kings, emperors, rulers, sages were establishing different types of gardens for different purposes.

3.1. Introduction

Food preservation can be defined as the science which deals with the process of prevention of decay or spoilage of food thus allowing it to be stored in a safe condition for future use. Scientifically, preservation may be defined as a science which deals with the process for prevention of decay. All foods gradually undergo deterioration or spoilage from the time they are harvested or manufactured. Some commodities spoil rapidly, while others can keep for longer but limited periods. Spoilage in the food products may be caused due to some physical, chemical and microbial changes during storage. The preservation of these products can be resulted by controlling following physical, chemical and microbial changes.

Horticulture deals with the art, science, business and technology of cultivation and management of horticultural plants. The word Horticulture is derived from two Latin words viz. ‘Hortus’ (means garden) and ‘Culture’ (means growing). Horticulture is an aesthetic science that deals with cultivation of fruit, vegetable, spice, plantation, medicinal, aromatic and flower crops. There is a vast therapeutic use of horticulture wherein gardening and aroma therapy are used to deal with new age maladies like depression and various addictions.

In ancient times, huge gardening spaces to grow large number of fruits, vegetables and flowers were available and these areas were demarcated with the help of high walls. This enclosed area was referred to as garden. This led to the term garden culture. The land area is decreasing due to industrialization and population growth, at the same time, there is a drastic increase in demand for horticultural produce. To meet the increased demand for horticultural produce and to cope up with the space constraints, multitier cropping systems, vertical gardening and other intensive cultivation practices are being resorted to. Hence, horticulture may also be described as the “Practice of growing and manipulating plants in a relatively intensive manner”.

Presently, fruits, vegetables, flowers and ornamentals are grown not only within the home premises, but also in large quantities on a commercial scale. In other words, many horticultural crops throughout the world are grown primarily as business enterprises. Thus, horticulture has two aspects in general i.e., the amateur and the professional. In addition, with the establishment of horticultural experiment stations as an integral part of colleges and universities, comparatively a large amount of scientific information on the behaviour and cultivation of horticultural plants and products is freely available. This information or literature, constitutes the science of horticulture, and the application of this scientific information constitutes the “Technology of Horticulture.” Thus, present day horticulture may be defined as the science and technology of production, processing and merchandising of fruits, vegetables, flowers and ornamentals where each crop has its own science and technology. Consequently, horticulture may appear differently to different people. To a teacher, professor, research scientist, extension official and landscape architect, it is an applied science and a profession, while to a commercial producer, wholesaler, a retailer of horticultural products, or to the manufacturers or seller of horticultural products, it is a business. It is also a fascinating hobby for connoisscur.

11.1 Introduction

In chapter 10, we have discussed the different types of variation, namely, genetic, environmental and genotype × environment interaction variations. We have also learnt how to estimate the phenotypic variance and its components including genotypic (also called genetic), environmental and g × e interaction variances from trial data. Now in this chapter, we shall discuss on the genetic components of polygenic (quantitative) variation and its implications on breeding strategies.

11.2 Genetic Components of Polygenic Variation

In this chapter whenever we call genetic variation, we mean polygenic (quantitative) variation, and we know that variation is usually measured in term of variance. However, variation, variability and variance are almost used synonymously. The genetic variance has been classified into different components by various workers. Fisher (1918) divided genetic variance into three components: additive, dominance and epistatic (interaction) variances. Wright (1935) classified genetic variance into two components: additive variance and non-additive variance (dominance and epistatic variances). Mather (1949) classified genetic variance into two components: heritable fixable variance (additive variance and additive × additive epistatic variance) and heritable non-fixable variance (dominance variance, and additive × dominance and dominance × dominance epistatic variances). Later, Hayman and Mather further divided the epistatic variance into three categories: additive × additive, additive × dominance and dominance × dominance.

Vegetables are of short duration, have higher productivity and give more return per unit area, besides giving nutritious food to human being and can be fitted in different farming systems. They also play a major role in balancing human diet, thereby helping in alleviating hunger, poverty and malnutrition. Because of the public awareness for the significance of vegetable consumption, the demand of vegetables in the global market has increased immensely. Thus, vegetable farming is becoming profitable venture globally, opening avenues of self employment and revenue generation (Anon., 2009). At global level, India holds second position, next only to China in vegetables production with a share of about 14%. The present annual vegetables production of country is about 175 million tons from an area about 10.3 million ha with a productivity of 17.1 t/ha. India grows largest number of vegetables in the world, as having a spectrum of wide range of agro-climatic situations, ranging from dry temperate to humid tropics between the altitudes from sea level to snow line.

The Indian hot arid region is one of the most important arid ecosystems of the world in terms of biodiversity it possesses. This arid region spreads over 31.7 mha, occupies major part of north western India including Rajasthan, Gujarat, Punjab and Haryana, which together contribute 73% of arid region. High temperature, wind velocity, low humidity, low and erratic rainfall and high potential evapotranspiration are important characteristics of this region which narrowed down the choice for vegetables, besides permit their low productivity.

Since floricultural and ornamental crops are grown for aesthetic purpose and are non-edible there is likely to be less concern in bio safety issues compared to other food crops. Hence there is considerable potential for developing transgenics in ornamental crops. Advances in transgenic technology provide new opportunities for manipulation of the genome. These will have significant impact on expanding and diversifying the gene pool of crop plants, introducing specific genes and shortening the time required for the production of new varieties or hybrids. Molecular breeding is beneficial to increase the production and quality by creating plants with enhanced resistance to diseases, insects or viruses and increased tolerance to environmental stresses like salinity, temperature or drought. Through this technique genes for shelf life, flower colour and architecture may be directly transferred to develop new varieties that are tailor made to customer preferences. Bioluminescent orchids and blue roses are the significant outcomes of the genetic transformation studies in ornamentals (Swarnapiria, 2009).

GENETIC ENGINEERING VS. TRADITIONAL BREEDING

Breeding with transgenic plants is only justified when genetic variation within the primary and secondary gene pools of a species is too small or gene transfer by conventional techniques is difficult and time-consuming. There are a number of different means for increasing or even creating new genetic variation, like species hybridization, mutation induction and protoplast fusion, which have been frequently used to breed new varieties. It is worth mentioning that neither plant cultivation nor commercialization of commodities has any legal requirements and a public discussion about these plants is also lacking. Therefore, a breeder must carefully assess the different constraints of transgenic breeding before starting a breeding program which are the legal aspects and acceptance by farmers, consumers and stakeholders (Jung, 2010).

Since floricultural and ornamental crops are grown for aesthetic purpose and are non-edible there is likely to be less concern in bio safety issues compared to other food crops. Hence there is considerable potential for developing transgenics in ornamental crops. Advances in transgenic technology provide new opportunities for manipulation of the genome. These will have significant impact on expanding and diversifying the gene pool of crop plants, introducing specific genes and shortening the time required for the production of new varieties or hybrids. Molecular breeding is beneficial to increase the production and quality by creating plants with enhanced resistance to diseases, insects or viruses and increased tolerance to environmental stresses like salinity, temperature or drought. Through this technique genes for shelf life, flower colour and architecture may be directly transferred to develop new varieties that are tailor made to customer preferences. Bioluminescent orchids and blue roses are the significant outcomes of the genetic transformation studies in ornamentals (Swarnapiria, 2009).

Characterization of Germplasm / Hybrids, Varietal identification, mutants etc.

Accurate identification of plants is desired for patent protection of plant varieties. Accurate characterization is also necessary to trace out the parents of new varieties. Use of present day molecular markers in addition to the classical methods provides more positive identification of new cultivars. RAPD and other molecular techniques have been used in a variety of plant materials for such studies (Sneath and Sokal 1973, Saitou and Nei 1987, Demeke et al., 1992, Selvam and Rajasekaran  1993, 1994, Dubouzet, et al., 1997, 1998, Hallden, et al., 1994, Hu and Quiros 1991, Jain et al., 1994, Matsumoto and Fukui 1996, Williams et al., 1990, Wolff et al., 1995). RAPD technique has been used in the genus Bougainvillea. It is often difficult to distinguish both mutants and hybrids and sports having a common progenitor, or progenitors themselves. Therefore, the industry needs a DNA-based fingerprinting technique to distinguish mutants or cultivars reliably. Reports are available on investigation about the molecular systematics and genetic differences for better understanding of varietal relationships in bougainvillea (Chatterjee et al., 2007, Kumar et al., 2006, Kumar et al., 2014, Hammad 2009, Pavan Kumar et al., 2015). 

The Cucurbitaceae family is characterized by long training viny stems. There is variation for flower size and colour among the species but all of them have similar general morphology. The species are open pollinated and self compatible. Most of them are either monoecious (eg. Cucurbita spp.) Or andromonoecious (e.g. common in melon). Other species show gynomonoecy, androgynomonoecy, androecy, gynoecy, hermaphrodite or dioecy. Chow-chow is the only member of the Cucurbitaceae that is viviparous, contains single seed and propagated by planting whole fruit. The Indian gene centre has rich diversity in genetic resources of ridgegourd (Luffa acutangula), bottlegourd (Lagenaria siceraria), bittergourd (Momordica charantia), ashgourd (Benincasa hispida), snakegourd (Trichosanthes anguina), pointed gourd- parval (Trichosanthes dioica), pumpkin (Cucurbita spp.) and roundgourd (Praecitrullus vulgaris). Cucurbits are of tremendous economic importance and are cultivated throughout the world from tropical to sub-temperate zones. China, Turkey, India and Iran are important cucurbit growing countries. In India, this diversity is concentrated in Indo-Gangatic plains, north eastern region, north western Himalayas, the Western and Eastern Ghats and sporadically in the tribal dominant belts of central India.  More diversity occurs in Cucurbita spp. in the north east as also for ashgourd, bottlegourd while for Luffa, it is more concentrated in the eastern peninsular tract.

Tripura is situated between 22º 56’to 240 32’ N latitude and 91010’ to 92021’E longitude with tropic of cancer passing through it. The total geographical area of state is about 10,491 km2 of which 57.98 % area is under forest cover.  Agriculture is an important sector in the state, which contributes 26 % of the State GDP of which the major contribution is from horticultural crops like fruits (pineapple, litchi and oranges), vegetables (potato TPS), plantation crops (cashew nut, coconut, rubber and tea) and spices (ginger, turmeric and black pepper). More than 75 % of the population either directly or indirectly depends on agriculture. The small and marginal farmers constitute about 90 % of total farming community and the average size of land holding is 0.97 ha (1990-91) in comparison to 1.25 ha (1976-77), which is the lowest among the seven other North Eastern states.

With the advent of clustered regularly interspaced short palindromic repeat (CRISPR)-associated protein9 (CRISPR/Cas9) genome editing, a fast and efficient new breeding technology, precision breeding in vegetable crops has become possible now. Several genes have been edited and functionally characterized using CRISPR/Cas9 in tomato for multiple traits such as plant type, floral morphology, fruit traits, disease resistance, and abiotic stress tolerance. The CRISPR/Cas9 has been proven in successful introgression of de novo domestication of elite traits from wild relatives to cultivated tomato. The progress in CRISPR/Cas9 based improvement in vegetable improvement, has been discussed.
Vegetables are an important source of healthy diet, as they provide essential nutrients including vitamins, minerals, dietary fibre, antioxidants and other phytochemicals. Dietary fiber-rich vegetables improve digestion, while also lowering the risk of obesity, diabetes, high cholesterol and heart disease (Behera et al., 2021). A world vegetable survey showed that around 392 vegetable crops are cultivated worldwide, representing 70 families and 225 genera. Over 97 species of higher plants are being cultivated and consumed as vegetables in India. These crops belong to 20 different families such as Cucurbitaceae (25 crops), Fabaceae (16 crops), Brassicaceae (12 crop) and Solanaceae (6 crops). The world’s total vegetables production was 1,155 million tonnes in 2021 where China ranks first with a total production of 600 million tonnes, accounting for 52.18% of the total world production. The top 5 countries (China, India, the United States of America, Turkey and Vietnam) account for 70.36% of total world’s production. As far as India is concerned,  it is the largest producer of ginger (2.23 million tonnes) and okra (6.47 million tonnes) in the world, while ranking 2nd in potato (54.23 million tonnes), dry onion (26.64 million tonnes), cauliflower and broccoli (9.25 million tonnes), brinjal (12.87 million tonnes) and cabbage (9.56 million tonnes) (FAO 2023).

1. Introduction

Fenugreek (Trigonella sp.) is one among the world’s oldest seed spice crops and has gained a supreme importance due to its extensive pharmacological properties (Basu and Prasad, 2011; Maloo et al., 2020). In ancient time’s fenugreek plant was well known and used as a medicinal drug by Egyptians (Rouk and Mangesha 1963). The Ebers Papyrus (one of the oldest preserved pharmaceutical documents) detailed therapeutic advantages and descriptions in Egypt circa 1500 BC (Betty, 2008). It has gained great importance due to its multifaceted uses which are being exploited by farmer’s and industrialist for different purposes.

Fruits contribute to nutritional security and thus are an important part of food system. To meet the future demand, development of varieties with improved yield and quality is the focus of researchers involved in fruit breeding. Though conventional breeding has resulted in the development of improved commercial varieties of different fruit crops, however conventional breeding is time consuming and faces several challenges due to long juvenile phase, highly heterozygous nature of most of the fruit crops. Challenges like changing climate, consumer preference, socio-economic conditions like reduced availability of land, labour and increasing cost of inputs, require fast and efficient methods to develop the varieties to meet the demands, which is not feasible with conventional breeding. Marker assisted breeding has given impetus to breeding efforts in several fruit crops, however it’s use is limited only for the traits controlled by a few major QTLs.
During last few years, enormous genomic resources have been developed for fruit crops using next generation sequencing technology. Such advances in genomic research in many fruit crops have paved the way for precision breeding using genomic assisted breeding (GAB) tools. GAB has helped in characterisation and utilisation of genome resources and using allele variation for cultivar development (Varshney et al. 2021). Advances in sequencing technology and affordability has allowed the genome wide analysis (GWAS) on diversity panels of different fruits resulting in identification of allelic variation associated with the traits of interest. Also, identification of superior alleles of candidate genes makes them amenable to genome editing based precision breeding. Genome wide genotyping and phenotyping offers tools for developing strategy for genomic selection (GS). Genomic selection relies on the prediction of breeding values of tested genotypes based on the large number of markers spread over entire genome. These tools promise to further improve breeding efficiency in fruit crops.

World Trade Organisation

The World Trade Organisation (WTO) was the result of years of painstaking efforts on the part of governments and other bodies to establish a globally acceptable basis for a new economic order. It was established to correct the imbalances and disparities in international trade and bring about an evenly balanced world trade order that equally benefits the developed, developing and least developed nations. While there are several agreements under the WTO, the Agreement on Trade Related Aspects of Intellectual Property Rights (TRIPS Agreement) specifically represents the resolve of all member countries to use intellectual property as one of the means for achieving economic balance and diminishing the trade barriers.

The term Geographical Indications (GIs) attained significant status in trade agreement negotiations after the establishment of World Trade Organization (WTO).Under WTO, Agreement on the Trade Related aspects of Intellectual Property Rights (TRIPs) sets forth standards to regulate international intellectual property protection and enforcement and establishes international minimum standards for GIs. Geographical Indications identify goods that have a specific geographical origin and possess a quality, reputation or other characteristics which are due to that place of origin. Geographical Indications are now widely accepted as valuable marketing tools in the global economy and are useful to protect rights of communities. Geographical Indications are not granted to individuals but are granted to the group/association of producers as the symbol of collective ownership.

Geraniaceae is a family of about 7 genera and 830 species which are
cosmopolitan in distribution and found widely in temperate and tropical regions.
Only 3 genera and about 25 species have been reported from India, mainly
from Himalayas. Some of the larger genera along with their approximately
reported species in parenthesis include Geranium (430), Pelargonium (280),
Erodium (80) and Monsonia (25). Well-known ‘geranium oil’ is distilled from
Pelargonium odoratissinum.
Pelargonium (syn. Geraniums, Stork bills) is an extremely popular garden
plant and has considerable economic importance in the market of ornamental
plants. Its genotypes and hybrids are grown in temperate regions. Its value as a
potential essential oil yielding crop is also mentioned. Geranium oil is widely
used in perfumery, cosmetics, pharmaceutical, and food industries. Oil has
anti-microbial, and pesticidal activities. The genus Pelargonium comprises
more than 280 species in 13 sections of which 33 have been originated in
southern parts of South Africa (Van der Walt and Vorster, 1988). It has been
reported that nearly 80 per cent diversity of Pelargoniums is centered in Cape
Province if African continent (South Africa, Zimbabwe and Mozambique).
Pelargoniums are popular seed and vegetatively propagated bedding and
pot plants with numerous phenotypes (Fish type, Ivy leaved, Regal, Angels,
Fancy leaves, Scented, Oak leaf) and cultivars (Double/ Bar/ Centre/ Ring/
Vein/ Picotee pattern/ Tulip/ Carnation/ Phlox/ Birds egg flowered) available
on the world market. True geranium is a bushy, aromatic plant. The stem is
cylindrical, woody at the base, pubescent, green when young and turning
brown with age. The leaves are highly aromatic in nature. Flowers are regular
and devoid of spur like appendages.

Introduction
Geranium is also known as cranesbill, scented geranium/rose geranium. It is adaptable over a wide range of soil conditions and drought tolerant. Being perennial aromatic herb, it is cultivated for rose scented essential oil extracted from leaves and tender shoots. The oil thus obtained is also called pelargonium oil or rose-geranium oil. The oil is of varied colour from colourless to pale yellowbrown or greenish. The genus Pelargonium belongs to the family Geraniaceae.
Origin
Geranium is native to sub-tropical southern Africa, and the most popular of bedding and green-house plants. The genus Pelargonium consists of about 600 species, which are annual, biennial, and perennials found in Cape province of South Africa.
Botany
The cultivated geraniums may belong to herbaceous to woody with thick fleshy leaves of round to lobed shape and deep cut. The flowers are present in terminal clusters with varying colours from white to pink, deep red and violet. Cultivated species are hybrids, having double flowers of mixed colours.

Abstract: Pelargonium (syn. Geranium), has become mainstay in temperate landscapes because of its ease of production and cultivation, long lasting bloom, range of plant habits and diversity of uses (perfumery, cosmetic, pharmaceutical and food industries). Confusion exists about nomenclature and taxonomic revision has attempted. Pelargoniums are popular seed and vegetatively propagated bedding and pot plants with numerous phenotypes (Fish type, Ivy leaved, Regal, Angels, Fancy leaves, Scented, Oak leaf) and cultivars (Double/ Bar/ Centre/ Ring/ Vein/ Picotee pattern/ Tulip/ Carnation/ Phlox/ Birds egg flowered) available on the world market. Their continued popularity has warranted extensive breeding and development of novel phenotypes particularly trailing growth habit, reduced plant size, compact form, manipulation of flowers (size, number, coloration, longevity, timing) and disease resistant cultivars. Increasing knowledge of the inheritance of traits, molecular genetic techniques and biotechnological applications are valuable tools aiding modern pelargonium breeders. The need of new cultivars remains strong as divergence among pelargonium market types increases, production system becomes more specialized and new market develops.