eChapters

Abstract: Gomphrena, indigenous to India, is popular choice for borders, edging, making crafts and potpourris. Only few species are cultivated under tropical and sub-tropical regions. A little work has been done in its improvement. Research should be focused on varietal development for long photoperiod cultivation, tolerant to high temperature stress and medicinal values of the crop. Prospects of hybridization and mutation breeding need to be explored.

INTRODUCTION

Gloriosa is commonly known as glory or gloriosa lily. Gloriosa lilies have assumed an important place in flower trade and are widely grown for cut flower and tuber production both in USA and Europe. Gloriosa lily is the national flower emblem of Zambia. Their cut flower stems last well in summer heat and their buds take lon time to open after picking. The bright vibrant and intense, red, gold, lemon and pink flower colours and the lush green leaves of gloriosa lilies bring a sense of the tropics or festivity to room. They combine well with many other flowers from roses to heliconias. Gloriosa blooms make perfect posies for the office desk, bedside cabinets or small tables and shelves. The stiff stems of gloriosa and their ability to hold their form out of water for a longer time make them ideal for out of water floral installation work. They are light climbers and are suitable for training on low walls or trellis. With proper trailing they can also be grown in pots. Its flowers are fascinating and its tubers and seeds have great medicinal value. The tubers are rich in alkaloids. Colchicine has been obtained from various plant parts viz., young leaves, flowers, old leaves, tubers, seeds and stems.

Gomphrena (Gomphrena globosa), commonly called globe amaranth, globe flower or bachelor’s button, is an important loose and dry flower crop. Its spherical, long-lasting flower heads make it particularly valuable in the dry flower industry. The chapter describes its origin, distribution, genetics, botanical characteristics and important cultivars. Gomphrena is also notable for betalain pigments and its C4 photosynthetic pathway, which contributes to heat tolerance and moderate drought resistance. Production practices covered include climate and soil requirements, propagation, nursery management, land preparation, nutrient management, irrigation and intercultural operations. The chapter also addresses pest and disease management, harvesting for fresh and dried flowers, postharvest handling and yield.

GAP stands for “Good Agricultural Practices” which are used for production of safe agricultural produce which has zero microbial load on it and inside it. It is important for the producer to be acquainted with GAP.

Good Agricultural Practice of horticultural crops are intended to apply to the growing and processing of all produce as traded and used in the European Union. Hence, they apply to the production of all plant materials used in the food, feed and medicinal industries. They also apply to all methods of production including organic production in accordance with the European Union regulations.

The farmers involved in the cultivation of horticultural produce should ensure that the there is no damage to the existing wild life and the biodiversity in the farms which are maintained. It is advisable to regulate wild gathering by a specific guideline.

The main aim of GAP guidelines is to ensure that the produce meets the demand of the consumer and is of high quality standard.

It is therefore, important that they are produced hygienically, in order to reduce microbiological load to a minimum. They are produced with care, so that negative effect on plants in the course of cultivation, processing and storage is limited.

All participants in the production process are required to comply with these guidelines voluntarily and to develop practical measures to achieve it.

Grafting is a horticultural technique. It is used commercially for many woody plants and some herbaceous plants. The purposes of grafting include asexual propagation, obtaining resistance to soil borne diseases, nematodes and unfavorable conditions, and improving fruit quality. Although there are advantages to grafting, graft incompatibility often prevents its practical use. Graft incompatibility occurs when the combination of scion and rootstock is inappropriate. The enormous range of genotype varieties used in grafting results in a wide range of physiological, biochemical and anatomical interactions between graft partners. Therefore, the causes and mechanisms of graft incompatibility vary according to graft combinations. Garner (1979) defined graft incompatibility as the failure to unite into a strong union, the failure to grow in a healthy manner, or premature death, when such failures could be attributed to differences between rootstock and scion.
 
The purpose of this review is to understand graft incompatibility as an aid to solving graft incompatibility problems. The symptoms and types of graft incompatibility are described, the causes and mechanisms of graft incompatibility are explored, and directions for future research are identified.

The green buildings are the needs of present day in India as well in the world. The easy availability of most of the green materials and equipments in the country has made it easier for designers to adopt local materials to a very large extent in the construction of green buildings. Now, there is an imminent need for service providers, who would be required in large number, not in hundreds but in thousands, as the movement is heading to reach greater heights. The green building movement is here to stay for the benefit of individuals, society and the country at large in the era of climate change.

With increase in the urbanization and industrialization, there is more pressure on available land and natural resources. In coming era, there will be only limited space available for city dwellers. In buildings one can grow a wide range of flowering and foliage plants. Plants not necessarily one confined to the outdoor only but bed room, kitchen, staircases, patios, windows and other locations can be made green with suitable plants. Indian Council of Green Building (ICGB) has developed the rating system.

Green Building in Santiago, Chile

A large amount of materials are used and energy consumed in construction and operation of average building. Many steps have been taken to reduce consumption of energy by developing new types of vehicle, energy sources, recycled materials and designing environment friendly buildings. These buildings are also known as green buildings or green construction or sustainable building.

The importance of green manuring in crop production has been known since ancient times. However, awareness towards soil enrichment is increasing in recent years, mainly due to comparatively high cost of inorganic fertilizers, increased risk of environmental pollution and need of sustainable cropping systems. Green manuring helps to improve physical, chemical and biological properties of soil and consequently crop yields. Green manuring lowers the nitrogenous fertilizer requirements for succeeding crops. However, it’s influence may vary with soil, crop environmental variables, type of green manure crop used and its management.

Green manuring is a practice of ploughing or turning into the soil un-decomposed green plant tissues for the purpose of improving physical structure as well as fertility of the soil. It is obtained in two ways; by growing green manure crops or by collecting green leaf (along with twigs) from plants grown in wastelands, field bunds and forest. Green manuring by growing the field plants usually belonging to the leguminous family and incorporated into the soil after sufficient growth. The most important green manure crops are sunnhemp, dhaincha, Pillipesara, cluster beans and Sesbania rostrata. The advantages of green manuring are as follows.

8.1 Introduction

The management of greenhouse environments has become crucial in modern agriculture due to increasing concerns about climate change and the urgent need for sustainable farming practices. Greenhouses, also known as “controlled environment agriculture” facilities, have revolutionized the way we grow food by extending the growing season and allowing us to cultivate a wide range of plants in various climates. They achieve this by precisely regulating environmental elements such as temperature, humidity, light, and carbon dioxide concentration, which are all crucial for optimizing plant growth and yield.

3.1 Chemistry of greenhouse gases (ghgs)

Greenhouse gases (GHGs) are atmospheric-gases that have capabilities to absorb and radiate-back the infrared (IR) radiation in the earth-atmosphere system (Figure 3.1). In this process the atmospheric-gases absorb and radiate- back IR radiation in lower atmosphere effectively emitting and absorbing heat energy heat energy. They maintain the heat budget of earth-atmosphere and keep our plant warm. If we typically see the chemistry of those gases, the key point is that they should have dipole moments. This is the property which makes them capable to absorb and radiate-back the range of IR radiation. In a molecule when valence-electrons are not equally shared in a bond between the two atoms, a slight positive charge is developed above one atom and a negative charge on the other atom. That charge difference of the different atoms in a molecule generates the dipole moment. For instance, in water vapour (H₂O- vapour), an unequal sharing of electrons and or separation of charge causes dipole moment. In H₂O, the centre has a positive charge at the hydrogen atoms and negative charges are located on the oxygen atom. The magnitude of dipole- charges, vibration and stretching of O-H bond generates certain frequency of the oscillating dipole moment that actually regulates the absorption capacity of IR radiation by H₂O vapour.

In India, risk-prone, high altitude area constitutes the easternmost trans-Himalayan part of Ladakh and Zanskar range (Jammu and Kashmir) and some parts of Lahoul Spiti (Himachal Pradesh). Truly described as cold desert with low population density, Ladakh constitutes the easternmost trans-Himalayan part of Jammu and Kashmir in India, comprising two districts, Leh and Kargil, bordering Pakistan and China (Fig. 1).

1.1 Introduction

The greenhouse industry is rapidly growing, particularly in mild climates, and is crucial for providing access to fresh and clean food. Greenhouses provide an optimal climate for crops to grow and protect them from outside pests. Furthermore, greenhouse production has the potential to reduce water waste and implement integrated protection and production (IPP). It is essential to consider the environmental impact of protected cultivation, and Life Cycle Assessment (LCA) is a valuable tool for evaluating these impacts.

Definition: Ground covers are low growing plants which are useful for covering large areas in the landscape Or Ground cover refers to any plant that grows over an area of ground, used to provide protection from erosion and drought and to improve its aesthetic appearance. An ideal ground cover must be easily established.

Ground covers are living plants or non-living materials used to cover areas. In general, plant related ground covers have a creeping or prostrate growth habit and grow no taller than 60 cm. A good ground cover should be evergreen and provide a permanent covering. Effects that cannot be achieved with turf grass or other plantings are possible with ground covers. Ground covers provide variation in plant height, texture and colour.

This chapter introduces environmental management and automation in greenhouse production. It explains how temperature, light, humidity, carbon dioxide and root-zone conditions influence plant growth and flower quality. The chapter discusses ventilation, evaporative cooling, supplemental lighting, sensors, automation systems, solar greenhouses and retractable greenhouses. It also introduces government support and guidelines for protected cultivation, including MIDH assistance. The chapter emphasizes precision environmental control, resource-use efficiency and technology-enabled production.

Growth and development are two important stages in a plant. Plant growth and development are under the control of both intrinsic and extrinsic factors. Growth is one of the fundamental characteristics of all living things. Even in Plants, the growth is visible but not measurable easily. Development in plants is actually a sum of two processes i.e. growth and differentiation.

Principles involved in plant growth and development: The various principles involved in plant growth and development are discussed below.

1. Totiopotency: Living plant cell has the potential to reproduce all the characteristics of the plant since it possesses all the genetic information.
2. Competence: It is the potential of cells or tissue to develop in a particular direction. Development of competency into a particular kind of cell(s), tissue or organ also may require special signals. These may originate internally within the plant or may originate externally as an environment signal, e.g. Internal change in type of growing point such as vegetative to flowering or initiation of adventitious roots on cuttings may be associated with a shift in the activity of specific hormones, external parameters i.e. application of growth regulators, or environment. It is mainly internal potential of meristem that gradually shifts from a vegetative shoot to one that produces flowers.

The term growth refers to an irreversible increase in size and weight of the plant. It normally reflects an increase in protoplasm, which may occur through increase in size of the cell and number of cells. Hence, the process of cell elongation and cell division provides the basis for growth. Cell division and enlargement are complicated processes involving synthesis of many organic compounds such as protein, cellulose and nucleic acid, besides the physical force required, which results in cell enlargement. The growth of the whole plant is compartmentalized into areas called ‘meristem’ where cell division and cell elongation are localized. The meristem cells such as shoot apex, root apex, cambium and the intercalary zones undergo repeated mitosis resulting in replication of DNA and nuclear material and finally the cell mass increases. Adjacent to this area of meristematic activity is the region of cell elongation, which phases in to the region of differentiation and maturation.

The increase in protoplasm (occurring in cell division and elongation) is brought about through a series of events in which water, carbon - di-oxide and inorganic salts are transformed into living materials. These events include (a) photosynthesis (production of carbohydrates) (b) nutrient absorption and translocation (uptake of water, nitrogen and other mineral elements) and (3) anabolism (synthesis of various materials produced in plant from the carbon fragments produced by photosynthesis and from the inorganic nutrients and water absorbed from the soil). The energy required for all these processes is provided by a catabolic process viz., respiration (degradation of sugars and fats to release energy). The net balance of anabolism and catabolism results in growth of the plant.

11.1 INTRODUCTION

Plant growth regulators have remained an important component in horticulture from time immemorial because they were effective means of quantitative as well as qualitative improvement in growth and development of crops. Plant Growth Regulators (PGR) are diverse group of organic compounds other than nutrients, produced artificially or by plants which in low concentrations promote, inhibit or modify the physiological process in plant. The term includes both naturally occurring phytohormones as well as synthetic compounds. These are produced naturally in higher plants, controlling growth or other physiological functions at a site remote from its place of production and active in minute amounts. Plant Growth Regulators are used in different forms like liquid, powder, paste etc. “Hormone” is Greek word derived from “hormao”, which means to stimulate. Thimone (1948) suggested the use of term ‘phytohormones’ as the organic substance, which are produced naturally in plants, synthesised in one Part And usually translocated to other part wherein every small quantity affects the growth and other physiological function of the plants. To distinguish them from the animal hormones they are termed as phytohormones. Auxin was the first hormone to be discovered in plants and at one time considered to be only naturally occurring plant growth hormone. The role of plant growth regulators in various physiological processes such as seed germination, f lowering, fruiting, seed development, fruit ripening and yield etc. in different crop plants is well established (Kiran et al., 2011). There are five classical phytohormones: auxins, gibberellins, cytokinins, ethylene and abscisic acid. Besides classical phytohormones a variety of other compounds that play roles in plant growth and development have also been identified, including jasmonic acid, salicylic acid, brassinosteroids and polyamines (Basra, 2000). The application of plant growth regulators in agriculture has started in 1930 in the United States. Ethylene, a naturally occurring substance, is one of the first plant growth regulators being discovered and used successfully for enhancing f lower production in pineapple (Fishel, 2006). Its toxic effects to human beings are low.

Guava is one of the most common fruits grown widely throughout the tropical and subtropical regions of the world. Guava is hardy in nature, prolific bearing and highly remunerative even without much care (Mitra and Bose, 1990). Because of its excellent adaptability and exceptional performance in the tropics, it is regarded as the ‘apple of tropics’.

In India, guava is the fifth most important fruit crop in terms of area and production. It is cultivated over 1.51 lakh ha area with a total production of 18.0 lakh tones (Chadha, 2001). It is rich in pectin and used for jelly making. It is useful as table fruit and also for processing purpose.

It is known by different names viz., madhuri (Assamese), peyara (Bengali), phanas (Gujrati), amrood (Hindi), sebe (Kannad), soh-priya (Khasi-Meghalaya), komperam (Garo-Meghalaya), pera (Malayalam), peru (Marathi), pijuli (Oriya), amrud (Punjabi), koyya (Tamil) and jama (Telugu).

Gypsophila is herbacaeous annual or perennial flowering plant belongs to family Caryophyllaceae. It contains several ornamental species of which Gypsophila paniculataL. is the only species used as a cut flower (Zvi et al., 2008) and it is applied as filler in flower arrangements (Jones, 1995 and Rehman, 2002). Gypsophila derived from “gypson” meaning chalk and “phylos” meaning lover, an etymology which alludes to its preference for calcareous soils (Vettory et al., 2013). Mainly found in temperate or warm-temperate regions in the Northern Hemisphere, best developed in the Mediterranean region and Near East (Ataslar et al., 2009 and Cronquist, 1981). It is a perennial plant often grown commercially as an annual crop. Root is rich source of triterpine saponins (Henry, 1993, Hostettmann, 1995 and Gevrenova et al., 2010) which are used for commercially in medicines, detergents, adjuvents and cosmetics (Hostettmann, 1995, Tschesche and Wulff, 1973 and Gevrenova et al., 2010). G. paniculata is one of the ten best selling cut flower species worldwide and thus becomes for the genetic improvement and selection of new varieties of commercial interest. Main regions of gypsophila production are Italy, Israel, Belgium, Germany and Holland while currently its cultivation is spreading across to other countries such as Ecuador, Egypt and Kenya due to lower labour costs. Infact, Gypsophila is among one of the most important varieties of cut flowers in Israel, where it is grown in more than 200 hectares of greenhouses and is almost entirely exported. For these reasons, the competition has increased dramatically, making the world market increasingly difficult for companies which feel the need to introduce new varieties that respond better to characteristics desired by consumers and florists.

Gypsophila, commonly known as baby's breath, is an important filler flower used extensively in bouquets, floral arrangements and export markets. This chapter covers its origin, classification, genetics, botanical features and commercially important varieties. Production practices include climate, soil, propagation, planting, spacing, irrigation, nutrition, pruning, crop regulation and growth regulators. Pest and disease management is followed by harvesting, grading, postharvest treatment, cold storage and drying. The chapter emphasizes the importance of ethylene management, silver thiosulphate treatments and proper grading for extending vase life and maintaining export quality. Protected cultivation can significantly improve yield and production efficiency.

Introduction
Genus Curcuma belongs to the Zingiberaceae family, and containing of about 122 species. These are grown profusely in Asian countries including, India, China, and Southeast Asia, Northern Australia and New Guinea. Like ginger, it is also the popular herb of this family for the utilization of its underground rhizomatous stem by human beings. Botanically it is named as Curcuma longa L. Its bright yellow spicy powder is got from the dried rhizome is termed turmeric powder, which is the final product of this herb. In addition to this curcumin bio-active compound is also extracted by cursing rhizomes of turmeric. The plants turmeric are considered to be a hybrid and sterile leaving vegetative propagation from rhizome as the single mode of propagation. India is recognized as the power house of turmeric production. Along with us, our neighbours in South East and Eastern region, including Malaysia, Thailand, Bangladesh, Cambodia, Philippines, Indonesia and even China are considered major producers.
Floral Biology
All species of Curcuma genus have almost alike flowering spikes that mainly originate from the topmost region of the rhizome (pseudo-stem) or sometimes on a separate stem directly from the rhizome. These two stems differ onlyin the inner portion of rhizome, which differ in colour, i.e., creamy, white, orange, yellow, bluish-green, blue, and sometime black also. The rhizomes exhibit commercial value as a medicine as well as food spice. Curcuma longa L. (Syn. Curcuma domestica Val.), is the common turmeric. It is the top ranking herb based on its economic potential among all the members of this genus and cultivated in India about 150,000 hectares.