eChapters

India is predominantly an agriculture based country and 65% of the Indians depend on agriculture. To meet the ever increasing nutritional demands of Indian population, production and productivity of vegetables have to be increased manifold within the limited available land and other resources. Seed is the basic and critical input in which the expected dividends from all other inputs depend and it plays a crucial role for enhancing the stability of productivity. With the ever increasing demands for a mechanized, energy efficient type of agriculture, each seed is expected to produce a vigorous plant, which would develop. uniformly under a wide range of environmental conditions.

Seed enhancement technologies have historical basis dating back hundreds to thousands of years. Seed coating was being practiced by ancient Chinese farmers who coated seeds of rice with mud balls to anchor the seeds in water saturated soil . The Greeks presoaked the cucumber seeds in milk or water to make them germinate quicker. Keeping the seeds in moist cloth or soaking in water prior to sowing was a common practice among the farmers of India from time immemorial.

Introduction

Use of acid/base is common in laboratories for experiments like titration and proper safety in their handling laboratory is necessary. In this chapter we will briefly discuss about the safety measures necessary to be adopted while using acids/bases in laboratory for any experiment.

Handling of Strong Acid/Base

There are four major points that need to be taken care of while working with strong acids or bases that might be quite harmful if any accident happens.

1. Protect Yourself

Wear a lab-coat and acid-resistant gloves: Always use lab-coat/apron and make it sure that the sleeves properly cover your arms. More importantly, use gloves made of acid-resistant materials and also wear shoes to protect your feet while wearing long-pants/jeans. Female with long hair, must tie her hair properly (with rubber band) to avoid any disturbance caused by appearance in between.

Wear safety goggles: It is important to wear safety goggles to protect your eyes using larger and fitting goggles that cover front as well as sides of your eyes. Always use properly fitting and adjustable goggles because smaller/ loose goggles may not protect the areas around your eyes against accidental acid spills and it may fall down from your face, if it is too loose.

Locate emergency wash area: There must be an emergency washing area nearby the work place or laboratory containing lab spill management kits. All the workers in the laboratory must be aware of using the kits and emergency plans.

Neutralize acid: Don’t panic even if an acid or chemical spill happens. Stay calm and act as quickly as possible. In case an acid spills, neutralize it by using sodium bicarbonate so that they can be cleaned and disposed safely. If acid comes in contact of skin, wash it off under running tap water but do not use/ apply sodium bicarbonate on skin.

Introduction

For proper and efficient experiment to be conducted, experimenters need so many chemicals to deal with. This includes different acids, base, salt, different kind of indicators and so on. Some of these chemicals are safe for health, but some of them are dangerous to health when come in close proximity to our body while some of the chemicals cause health issues on inhaling. These may cause improper functioning of some of our physiological activities. Acids and bases are very dangerous for our tissues when come in our contact. These may cause serious respiratory problem in addition to injuries on coming to our contact. Some chemicals are exploratory yet they may cause even death of the person working with them in laboratory. Therefore, mere use of the chemicals in laboratory is not only the objective of the experimenter. The person working in laboratory should also be concerned about the proper use and handing of the chemical while working with it. Thus, every researcher of an institution who has to work with chemicals in a laboratory should be made aware about the chemicals to be used in the laboratory and the consequences if any mishandling of a laboratory chemical occurs. Not only these, suitable precautionary measures should also be known to the researcher along with ensuring the availability of the required safety equipment/installations. Hence, a proper understanding of the ways of handling of chemicals in a laboratory is of prime importance for the personals like you who are working or have to work in laboratory.

Safe Handling of Chemicals in Laboratory

Safe use/handling of chemicals in laboratory include minimized exposure to chemicals, maintaining safety data sheets, proper labelling, storage, segregation, and transport of chemicals for personal hygiene.

Introduction

We come across a variety of chemicals every day in a laboratory. While some of them are relatively safer, others are extremely hazardous. Thus, it is very important to know the potential hazards that can be caused by the chemicals present in the laboratory and the safety measures needed to be followed to avoid the hazards. Additionally, we should also be aware of the steps necessary to be taken on such hazardous situations. According to IUPAC, a hazardous chemical mean the chemical which has the potential to cause damage in various ways. In a laboratory, there are chemicals that might be irritant, carcinogen, respiratory fibrogen, systemic poison, asphyxiant, flammable, etc. which have the potential to cause hazard to the workers or environment. Therefore, it is important to use appropriate procedure to reduce the risk and protect the health/safety of laboratory personnel, the public and the environment.

Types of Hazards Associated with Chemicals

Chemical hazards: The hazards caused by chemicals can be broadly classified into three categories.

1. Health hazard: This is also known as toxic effects of chemical. The risk associated with a chemical in laboratory depends on the extent of exposure and the inherent toxicity of the chemical. Many chemical reactions form the product that might be much more toxic than the reacting chemicals. For example, inadvertent mixing of formaldehyde (a common tissue fixative) and hydrogen chloride results in the generation of bis(chloromethyl) ether, a potent human carcinogen. For most of the chemicals, the route of exposure (through skin, eyes, gastrointestinal tract, or respiratory tract) is more important (Figure 17.1) that must be considered during risk assessment.

Cities or urban conglomerations are fast developing and where the rate of land availability has infinitesimally small; vertical expansion and taller buildings have emerged and are defining the city skyline. Though this may speak well of the economic development, but the increase in hard paved areas and roads may spell trouble for the environment as urban heat island (UHI) effect. The causes of Urban Heat Island are primarily due to the absorption of solar radiation (Short wave) by building/urban materials that is subsequently re-radiated (long wave) to the surroundings. In addition, heat generated from the use of air- conditioning coupled with the greenhouse effect of pollutants also contribute to the increase in temperature. Such increase in temperature with the presence of air pollutants can result in the accumulation of smog, damages the natural environment and jeopardizes human health. It also costs consumers more money because it takes more energy to cool buildings. Who can forget the regular news of Beijing repeatedly topping the list of most polluted cities and fresh air is available in cans!

Fresh air cans are in no means a firm solution. Plants are atmosphere cleansers, can serve to filter carbon dioxide and other toxins in environment, cool the air by transpiration and also provide cooling shade. Research work shows the benefits of using light colour roofs and roof gardens to minimize the heat gain inside the buildings. This would in turn reduce the energy consumption of air conditioning in buildings. Rooftops, balconies and terraces have often been referred to as the “last urban frontier” of cities, in the sense that they represent the last significant remaining space to be exploited to create a green oasis and an area of relative peace and privacy away from the urban bustle. Given the social, economic and environmental contributions of urban greenery to the quality of life in cities and the realization that cities more often than not lack sufficient greenery, greening of rooftops, balconies and terraces is therefore a logical, effective and high impact way to re-inject the much needed greenery in urban settings thus reinventing the concept of hanging gardens.

Energy and food are the two main requirements for human civilization; however the demands for these two resources are increasing in a fast rate. Development of any region is reflected in its quantum of energy consumption. In this context, the situation in arid region is difficult. People burn firewood, agricultural waste and cow dung cake for cooking food causing damages to the fragile eco-system of arid zone. There is inadequate electrical power supply and hence villagers of remote arid areas are unable to derive general benefits. The kerosene is used for lighting and fast depleting diesel oil is used for running agricultural machinery including pumps. In this context solar energy is considered to be one of the promising sources in India.

About 12% of electricity production capacity in India is met through renewable energy sources. In India, national solar mission was launched in November 2009 with a target of 4000 MW grid and 1000 MW off-grid electricity generation from solar energy by the end of phase II (2013-2017), whereas these targets are 20,000 MW and 2000 MW, respectively by 2022. The target has been revised in 2015 to a total grid connected solar power generation of 1,00,000 MW comprising of 40,000 MW roof top generation and 60,000 MW grid connected solar power plants (Resolution of MNRE, Govt of India, No. 30/80/ 2014-15/NSM dated 1^st July 2015).

Kewda plant occurs wild in the entire coastal belt of Odisha , but abundant in Chhatrapur and Keluapalli areas of Ganjam district. There were about 3-4 lakhs trees of kewda in Ganjam district (Deshaprabhu, 1966). Main season of flowering starts from July-August and lasts for 2-3 months and a few flowers also come during November-December and March-May (Haines, 1961). Averagely, a plant produces 15-20 flowers per season depending on branching of the tree (Plate 32). A fully matured tree bears 30-40 spadices in a year (Deshaprabhu, 1966). Flowering is also dependant on rainfall, being better in years of high rainfall. Size of flower is bigger during rainy season. The spadices take a fortnight to mature, depending upon the weather condition. Ripe spadices, creamy in colour, give higher yield of perfume and of better quality than immature ones (Plate 33). The kewda flower of Ganjam district is also registered under the geographical indications (GI) of goods (Registration and Protection) act (Panigrahy, 2019).

4.1 Dry Flower Garden

Contrary to popular assumptions, the area required for producing large quantity of dried flower material need not also be large. However, the garden should be planned so as to harvest dry flowers all year round by planting evergreens, deciduous plants, annuals and perennials. Rows of flowering plants should be planted in the dry flower garden. Herbs are easy to grow, and can be planted in pots and window boxes. They are useful in transforming simple cooking into gourmet dishes, while also lending their delicate scents to a room when dried and for use in wreaths, pot pourri and arrangements. Gardens for dry flower production should include a wide selection of weeds, grains, seed-heads and pods. Flowers such as hydrangeas, zinnias, roses, dahlias and sunflowers and a selection of line flowers such as golden rods, statice, gladiolus, larkspur and delphinium can also be grown as these will provide a greater variety of flowers needed in flower arrangements.

It is not just enough to produce fruit and ornamental plants in a nursery, but it is also very much important to consider the post production management practices like harvesting, packing, storage and marketing of nursery plants for successful industry.

Harvesting: Harvesting is one of the important factors considered, when nurserymen are producing seeds, bulbs, etc. The seeds or bulbs should be harvested at proper maturity stages depending on the plant species.

Seeds are generally harvested when they are fully ripe. In some of the annuals and perennials, seeds are likely to fall from the plant at ripening either due to bursting of the fruit/ capsule or due to wind. (calendula, balsam). In such cases, it is better to cover with muslin cloth or butter paper bags. Bulbs, corms and tubers are carefully dug out without injury, along with cormels or bulblets.

Packaging: The package should provide a convenient mode used for marketing and distribution. It protects the contents from undue damage during distribution. It is important that appropriate packaging should be used to preserve quality of material along with maximum survival during transit. Proper packaging of plant material (fruit plants/ ornamental plants/seeds) ensures quality during storage, distribution and transport.

6.1 Introduction

Greenhouses play an essential role in modern agriculture and horticulture by providing a regulated environment for plant development. To ensure optimal growing conditions and maximum yields, it’s crucial to maintain the temperature inside these structures effectively. This leads us to the fascinating subject of “Heating and Cooling of Greenhouses,” where we investigate the delicate balance between temperature, humidity, and ventilation to promote plant health and production. With greenhouses, growing seasons can be extended, a broader range of crops can be grown, and even plants that would not do well in the local environment can thrive.

Hedge

When shrub is planted on boundary for fencing, it is also called as hedge. In other word shrubs or trees planted at regular intervals to form a continuous screen is called a hedge. It may be ornamental or protective or both. Hedge also become an important feature of formal layout to serve various function as screening of the area out building, tennis court, vegetable garden, hardening of unwanted place etc. All the shrubs cannot be planted for making an ideal hedge due to different nature of growth.

Hedge

Hedge is an important garden feature both for beautification and functional purposes. When a selected plant species is planted together at close distance, in single or multiple rows, later pruned to retain a definite shape and height is known as hedge. These are actually live fence used for demarcating road, paths and sometimes for providing physical barrier, screening and several other purposes.

Selection of Plants

Before selection of plants for developing hedge, the purpose of planting hedge is to be considered first. If the purpose is protective fence, the height and width are to be decided. Accordingly, selection of plant species is to be made. For developing low height and ornamental hedge along the passage and inner roads, selection of plants will be different. In this case, plants having colourful leaves is preferred. Final selection of plant species, however, should be done considering location, availability of sunlight and the type of garden. Plants selected for developing hedge should response well to pruning and, at the same time, acquire a definite shape on repeated pruning. Both foliage type and flowering plants are used for developing hedge.

Heliconia belongs to family Heliconiaceae is popular as ornamental plants and cut flowers because of their brilliant colours and exotic appearance. The genus name “Heliconia” is derived from “Helicon”, a mountain in southern Greece regarded by the ancient Greeks as the home of the Muses, thus suggesting the relationship between these plants and the bananas, genus Musa (Berry and Kress, 1991). Unique features of the Heliconiaceae are (1) medium to large erect herbs rising from underground rhizomes;(2) each erect shoot is composed of a stem and leaves, whereas the stem is made up of an axis covered by overlapping sheathing leaf bases, technically called a pseudostem;(3) inverted flowers and (4) the presence of a single staminode. Heliconia has long been popular horticulturally because of their showy inflorescences. It was so attractive that early explorers of the tropics returned to Europe with several species that became prized green house specimens. Heliconia, grown in nearly all of the tropical regions of the world, including Africa and Asia. In India, heliconia is grown in North-East region and Kerala.

ORIGIN AND DISTRIBUTION

Heliconias are native only to Central and South America and some of the islands of the South Pacific, for horticultural and commercial popularity. Berry and Kress (1991) stated that they are native from Tropical America and found at different altitudes, from sea level up to 2,000 meters in Central and South America, and up to 500 meters in the South Pacific Islands (Criley and Broschat, 1992).

Most of the Heliconia species are distributed primarily in Neotropical areas from the North of Mexico to the South of Brazil (Santos, 1978, Dahlgren et al., 1985 and Kress, 1990). A small Paleotropical group, about eight species, occurs in islands of the South Pacific (Tomlinson, 1969 and Kress, 1985). There are approximately 40 Brazilian species with two primary areas of distribution: the Amazon basin and the Atlantic coastal forest (Kress, 1990). About 100 or more species, native mainly to tropical and subtropical South and Central America (Cronquist, 1981).

Several attempts have been made over the years to sort out the taxonomy of the Old World Heliconia. Baker (1893), followed by Schumann (1900) and Winkler (1930), dealt with the problem of identity and origin of these taxa by assigning them to the neotropical species Heliconia bihai L. Others such as Ridley (1908a, b), Backer (1920) and Green (1969) recognized the distinctive and endemic features of the paleotropical taxa that separated them from the neotropical species. This ornamental rhizomatous herbaceous plant from the Heliconia genus, belongs to the Musaceae family, now constitutes the Heliconiaceae family in the Zingiberales order. The various species of Heliconia are subdivided into five subgenera: Heliconia, Taeniostrobus, Stenochlamys, Heliconiopsis and Griggisia; and 28 sections (Kress et al., 1993).

Heliconia is a tropical ornamental crop valued for its striking inflorescences, vibrant colours and long-lasting cut stems. This chapter presents the origin, distribution, species, botanical characteristics and commercially important types of Heliconia. It discusses climate, soil, shade, propagation, planting, irrigation, nutrition and cultural management. Pest and disease problems are described together with suitable management practices. The chapter also addresses harvesting stages, postharvest handling, grading, packaging, vase life and yield. Its emphasis on tropical production makes Heliconia particularly relevant to growers seeking to diversify high-value floriculture enterprises in warm and humid regions of India. commercially.

This chapter introduces Heliconia as an exotic tropical ornamental crop valued for its brilliant colours, distinctive inflorescences and excellent postharvest longevity. It examines origin, distribution, genetics and botanical characteristics and discusses important commercial species and varieties. Protected cultivation practices, nutrition, irrigation, planting, pruning, plant growth regulators, pest and disease management, harvesting and postharvest handling are presented. The chapter highlights the potential of Heliconia as a premium cut flower and its suitability for tropical and subtropical regions of India.

Heliconias are tropical plants of princely dimensions grown for their attractive foliage and brilliant flower spikes. They are some of the most unusual flora of the tropics. Strikingly elegant flower heads rise from banana like clumps of oval leaves, which are sometimes rather slender and, with a few varieties, extremely large. They are found naturally in the tropical forests world wide and in moderate climates. A popular landscape plant and cut flower in tropical and subtropical areas of the world, heliconias are native to Central and South America, the Caribbean Islands and some of the islands of the South Pacific. Their easy cultivation and spectacular presence have made them favourite garden subjects throughout the world. Heliconias have several common names including lobster’s claw’s, ‘parrot’s flower’, ‘parrot plantain’ and false plantain. Depending on variety, heliconias will range in height from 60 to 700 cm, often with extensive rhizomatous growth. The flower or inflorescence of heliconia is nearly always terminal and may last from several days to several months. They are particularly desirable as cut flowers because of their long lasting characteristics. 

Henna or Mehandi (Lawsonia inermis L.) a perennial shrub belongs to family Lythraceae. It is commonly cultivated as a commercial dye crop possess natural dyeing properties and are used for hair dyeing and for staining of palm, feet and other body parts since times immemorial. The plant finds their importance due to presence of orange red dye in its leaves and essential oil in its flower. Oil extracted from leaves and flower called ‘Otto of henna’ which is utilized as perfume (Jaimini et al., 2005). It can grow well in harsh climate of arid and semiarid regions. In India, over 90 percent of the henna production comes from Sojat region of Pali district of Rajasthan and Sojat is only center for its processing and trading in India. In India it occupies about 40,000 ha area out of which 35,000 ha alone is in Pali district (Sojat and adjoining tehsils).

Geographical distribution

It occurs naturally in North Africa mainly in countries of Algeria, Cyprus, Egypt, Eritrea, Ethiopia, Indonesia, Iraq, Iran, Jordan, Kenya, Kuwait, Lebanon, Libya, Malaysia, Morocco, Oman, Philippines, Qatar, Saudi Arabia, Syrian Arab Republic, Tanzania, Tunisia, Turkey, Sahara and Yemen. It is naturally occurring in many of these countries along the water courses and semi-arid regions where it can with stand dryness as well as drought. It has been introduced into countries like Australia, Benin, Burkina Faso, Cameroon, Central Africa, Chad, Congo, China, Gabon, Gambia, Ghana, Guinea, India, Liberia, Mali, Mauritania, Niger, Nigeria, Pakistan, Senegal, Sierra Leone, Spain, Sudan, Togo and Zanzibar (Suresh Kumar et al., 2005).

Distribution

Several countries grow henna on a commercial scale for its dye-bearing leaves, notably India, Egypt, Iran, Niger, Sudan and Pakistan. In India, it was once grown extensively in Punjab and Gujarat. However, gradually the major cultivation has shifted to the arid fringes of Rajasthan, with Pali district having the maximum area under henna. It is taken as an annual Ratoon crop under rainfed conditions. Presently over 39,000 ha of henna plantations in the district with nearly 70 per cent occurring in the Sojat area produce around 20,000 t dry leaves worth Rs. 40 crores. Besides this, leaf cuttings are also collected from existing farms and field boundary plantations in Gujarat and Madhya Pradesh. In Uttar Pradesh henna is grown for its scented flowers used in the essence industry. Kannauj, Lucknow, and Varanasi in Uttar Pradesh are reputed centres for the commercial extraction of mehndi oil from flowers and its use in traditional essence. Since henna is grown as a dryland crop under limited moisture conditions greater use of available moisture by the plants is possible.

The state of Jammu and Kashmir is highly mountainous except for a short belt joining the Punjab plains. Geographically, the state of Jammu and Kashmir is divided into three regions -alpine desert of Ladakh, subtropical region of Jammu and predominantly temperate region of Kashmir valley. The valley is rich in herbaceous flora with huge potential for landscape use, however, many of which are still not exploited much for the purpose. Plants which live and bloom year after year are known as perennials which have an importance of their own and are backbone of any well-planned garden. The stems of herbaceous perennials die at the ground level each winter. They comprise a vast group of plants widely differing in size, leaf texture, flower color and are found in all the gardening countries of the world. The monotonous spread of concrete and glass in cities can have a dehumanizing effect. Growing colourful flowers in the house compound and in the parks will greatly enhance the beauty of surroundings in the countryside, the towns and cities. Flowers also bring happiness to life and boast the sagging spirits. The assemblage and display of colourful and attractive herbaceous perennials can achieve very significant and telling effects on the environment particularly in the landscaping of the house compounds, gardens, parks, health resorts and hotels. Now a day herbaceous plants are also used therapeutically to cure several problems related to humans. Judicious selection of native and introduced herbaceous perennials should camouflage with the type of habitation, building pattern, colour of the countryside etc. These plants should occupy only well thought of position in the landscape. There are always a number of shady spots in our lawns/gardens especially towards north-east side of a structure where lawn grass fails to grow or show poor growth. These spots can be converted into perennial herbaceous border of foliage plants.

Trees and shrubs are often the most dominant plants in landscapes but ground covers and vines play an important role too. The low spreading form of ground covers can connect and unify major planting areas and even serve as a focal point when the plants are flowering. In contrast to annuals, perennials provide savings in time, labour and expenses each year because where adapted to a specific climate zone, they can successfully over come winter and re- establish for more than a single growing season. Perennials are probably the most diverse plant group, providing a huge variety of shape, form, colour, texture and scent with which to design a planting. Since there is an increasing trend and awareness of planned landscaping in the public and in view of its value in preserving the environment, there is an urgent need to identify and select the appropriate native, naturalized and exotic planting material for specific sites /locations. Information regarding herbaceous perennials surveyed and identified in Kashmir Valley with prospective use in landscaping are given as under:

14.1 Herbarium and Its Limitations
A collection of dried and pressed plants arranged according to a classification system and available for study or reference is known as herbarium (plural, herbaria), a name first applied by Linnaeus.
Plant specimens are usually mounted on a sheet of high quality paper. Properly dried, pressed and identified plant specimens are placed in thin paper folders (species covers) which are kept together in thicker paper folders (genus covers), and finally they are incorporated into the herbarium cupboards in their proper position. Some fleshy members (e.g. Cactaceae) are preserved in liquid preservatives instead of being pressed and dried. Bulky plant parts (e.g. dry fruits, cones of several gymnosperms, etc.) are dried without pressing and are stored in special bags.
A herbarium may contain a few hundred locally collected plant specimens kept in a small place, or it may contain millions of them collected from different parts of the world and housed in a very big building. Herbaria in different countries remain associated with colleges, universities, scientific societies, research institutes, botanical gardens or flora of a district, state, country, continent or several continents. There are also private herbaria.