eChapters

The Indian arid zone is characterized by high temperature and low and variable precipitation which limit the scope for high crops productivity. However, these conditions greatly favour the development of high quality in a number of fruits such as date palm, ber, aonla, bael, pomegranate, kinnow, lasoda and in vegetables cucurbits, legumes and solanaceous crops, spices, medicinal and aromatic plants. The existing low productivity could be increased by following improved technologies and inputs. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas. The amelioration of the extreme conditions is also considered vital for life support to the inhabitants of this area. The recent awareness regarding the potential of these ecologically fragile lands for production of quality produce has not only opened up scope for providing sustainability for the people of this region, but also for bringing in new areas to increase horticultural production. The area expansion and yield potential of arid horticultural crops has increased many folds because of development of new varieties and advancement in production techniques in arid region.

7.1 Economics and Valuation of ghgs emissions

Since the late 20^th century, it has been largely accepted that cause of high concentration of GHGs in atmosphere is induced by human activities. Greenhouse gas emissions and related climate change has opened up debate on overall economic losses and ways to reduce these loses. Moreover, apart from curbing monetary losses; the global political leaders as well as reputed economists are looking towards making money by saving the emissions. Recently, the researchers have started to emphasize on the actual value added to the ecosystem by curbing emissions, discrete of the economic benefits. This section will discuss the economics and ecosystem services related to the management of GHG emissions.

Origin

The initiative to curb the emissions started in 1992 with the United Nations Framework Convention on Climate Change (UNFCCC) at the Earth Summit in Rio de Janeiro. The Convention took place from 3 to 14 June, 1992. The UNFCCC is an international environmental treaty designed to “stabilize greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system”. The UNFCCC had non-binding limits on greenhouse gas emissions for individual countries and the framework was only meant for formulating precise international treaties (called “Protocols” or “Agreements”). It contained no execution mechanisms, however, it considered some negotiations and suggestions to formulate the action plans and regulation guidelines under UNFCCC to fulfill the objective of reduction of GHG emissions to the desired level.

What is mitigation of GHGs emission? We must be clear about the answer of this fundamental question. In simple term, the mitigation of GHGs emission is the way or means by which the emission of those gases could be reduced. As we know from the previous chapters of this book that the GHGs emission could be occurred from natural as well as anthropogenic activities. Natural activities included volcanic eruptions, ocean current fluctuations, continental drifts which are responsible for emission of huge amount of CO₂ and other GHGs. The reduction of emissions from those natural activities is beyond our capabilities. However, the human induced emissions of GHGs emission could be reduced. We studied in previous chapters that fossil fuel burning, industrial and energy sector pollution, deforestation, land use change and agricultural could contribute to GHGs emission considerably. Mitigation techniques are different for each of those sectors that governed by lot of interrelated factors. In actual sense, the mitigation of GHGs emission should includes all the measures that can curtail the anthropogenic emission from all sectors. But that is out of the scope of this book. In this book, we specifically address the mitigation principles, options and efficiency of different techniques/ practices in agriculture only.

In that aspect, the mitigation of greenhouse gases emissions in agriculture is defined as “the means and ways by which emissions of GHGs could be reduced from agriculture”. The ways and means actually referred to the techniques and practices and their amalgamation in agricultural sector both in production, processing and consumption aspects. So, mitigation is not only a techniques or combination of techniques it is actually an integrated approach for reducing greenhouse gases emission from agricultural systems. Primarily, there are two complementary approaches for mitigation of GHGs emissions from agriculture. Those two approaches are (i) supply-side and (ii) demand- side options or pathways. The supply-side approaches includes scientific land- use-changes, improvement of crop management, better livestock management practices, enhancing carbon storage in biota, soil carbon sequestration, significant substitution of fossil fuel by bio-fuels and use of renewable energy in agriculture. On the other hand, demand side approaches, taken in to account of shifting in the dietary pattern from non-vegetarian to vegetarian, curtail down the food loss and waste, and reducing the supply-chains (Figure 6.1). We can see, most of the approaches in supply-side are technology driven, while, approaches in demand-side are socio-economical and or policy driven. In this chapter we would thoroughly discuss the principles of mitigation, options of mitigation, mitigation cum adaptation approaches to reduce GHGs emission and climate change and few strategies to cope up with the vagaries of climate change.

5.1 Impact of climate change on agriculture

Climate change has both positive and negatively impact on agriculture, food security and land degradation. Climate change could exacerbate the land degradation processes by increases in rainfall intensity, drought frequency and severity, dry spells, f looding, heat stress, sea-level rise and permafrost thaw. The 1/4^th of ice-free land area in the world is prone to human-induced anthropogenic degradation (Certini and Scalenghe, 2011; Hooke et al., 2012). Soil erosion rate is 20-100 times faster than that of soil formation in agricultural field. The erosion rate is least is zero-tillage (non-disturbed field) and maximum at conventional intensive tillage practices. Climate change further exacerbates the land degradation. The permafrost areas, dry-lands, low-lying coastal regions, river deltas are more vulnerable. The occurrence of drought in dry-land was increased by around 1% per year during 1961-2013 periods. On an average 380-620 million people globally experienced desertification who lived in dry-land areas (1980s and 2000s) in South and East Asia, North Africa, Middle East, Sahara region, and Arabian peninsula. Moreover, people who are already living in degraded/ desertified regions are more negatively affected by climate change.

Specifically, the land surface air temperature has increased about twice as much as the global average temperature since the pre-industrial era. The land-surface air temperature has increased relatively higher than the world’s average surface (land and ocean) temperature since the pre-industrial era (1850-1900). The average land-surface air temperature has enhanced by 1.53°C (1.38-1.68°C), whereas, world’s surface (including land and ocean) air temperature has enhanced by 0.87°C (0.75-0.99°C). Subsequently, global warming triggered the frequency, intensity and duration of heat waves and related damage. The direct and indirect impacts of climate change on global agriculture is summarised below for an overall idea about the importance of the issues.

The measurement of greenhouse gases (GHGs) has been started during middle of the last century. Initially, CO₂ and water vapour were measured with other common meteorological variables like temperature, sunshine hours, rainfall, humidity etc., for monitoring the weather condition and pollution. The absolute or relative concentrations of gasses in atmosphere are used to measure basically for monitoring purpose. However, limited studies were dealt with actual gaseous exchanges of fluxes. The concern about gaseous flux measurement and GHGs-exchanges started after 1900s when people got concerned about anthropogenic pollution, environmental sustainability and climate change issues. The GHGs-exchanges in earth-atmosphere systems primarily occur due to change in meteorological variables, soil responses and physiological activities of crops. If we are interested for environmental data inventories, then absolute GHGs concentrations of atmosphere at a specific time is required. However, presently researchers, students, environmentalists, climate scientists are primarily interested for quantitative data on GHGs fluxes and or GHGs-exchanges. They want to know what and how much quantity of a particular GHG is emitting from unit area at unit time.

Flux refers to the amount of any gas emitted per unit area per unit time. The dimension of that is M A^-11 T^-1. (Where, M= Mass/ Quantity; A= Area; T= Time). The SI unit of flux is g m²s^-1. Therefore, flux is a vector. It has magnitude as well as direction. As for example positive flux of CO₂ from earth surface means, CO₂ is moving out from earth surface to atmosphere. If it moves in opposite direction then the flux would be negative. In that case CO₂ gas may be absorbed by the soil surface from adjacent atmosphere. Similarly, GHGs fluxes of earth surface are either positive or negative. Generally, positive GHGs flux refers to emission of GHGs from earth to atmosphere and vice versa.

3.1 Chemistry of greenhouse gases (ghgs)

Greenhouse gases (GHGs) are atmospheric-gases that have capabilities to absorb and radiate-back the infrared (IR) radiation in the earth-atmosphere system (Figure 3.1). In this process the atmospheric-gases absorb and radiate- back IR radiation in lower atmosphere effectively emitting and absorbing heat energy heat energy. They maintain the heat budget of earth-atmosphere and keep our plant warm. If we typically see the chemistry of those gases, the key point is that they should have dipole moments. This is the property which makes them capable to absorb and radiate-back the range of IR radiation. In a molecule when valence-electrons are not equally shared in a bond between the two atoms, a slight positive charge is developed above one atom and a negative charge on the other atom. That charge difference of the different atoms in a molecule generates the dipole moment. For instance, in water vapour (H₂O- vapour), an unequal sharing of electrons and or separation of charge causes dipole moment. In H₂O, the centre has a positive charge at the hydrogen atoms and negative charges are located on the oxygen atom. The magnitude of dipole- charges, vibration and stretching of O-H bond generates certain frequency of the oscillating dipole moment that actually regulates the absorption capacity of IR radiation by H₂O vapour.

Climate change is caused by both natural as well as anthropogenic causes and it has been changing since the inception of earth-atmosphere (Figure 2.1). In a broader sense, anthropogenic activities (human activities) also must be considered as natural one in longer time scale as human and their activities are also a part of natural-ecosystem-functions. Among the natural phenomena, volcanic eruptions and continental drifts significantly affect the earth’s precipitation and temperature. A huge volume of CO₂ is released due to volcanic eruption at a little span of time-period which heated up the earth-atmosphere. Climate variability is primarily governed by rise in sea temperature, movement of warm water from the Western Pacific towards Peru, and El Nino which occurs at an intervals of 3-7 years. Climate variability also influenced the alteration in temperature and precipitation world wide. And persistent climate variability cause long term climate change. Therefore, basically three drivers that causes climate change are, the alteration in the energy of sun received by earth-atmosphere (natural causes), variations of ref lectivity of earth-surface- atmosphere system (natural as well as anthropogenic causes) and fluctuations in the greenhouse effect (natural as well as anthropogenic causes).

1.1 Weather

Firstly, what is weather? Simply, the conditions in the atmosphere above the earth is called weather. It refers to the conditions such as wind, rain and temperature, prevailing at a particular location during periods of hours or days. We often ask “what’s the weather like today”? Any individual can answer to this question as it requires only a short term experience or say exposure to the atmosphere. The TV news forecasters predict weather each day and inform about the temperature, cloudiness, humidity, or possibility of storm in the next few days. Weather is localised, say, it’s a hot and cloudy weather in one part of the country and dry and windy on the other part.

1.1.1 What are the factors that influence weather?

Before we try to understand the factors that influence weather, we must understand what the components that describe a weather conditions are? Is it the rains, or the air temperature or both? The answer to this question is not so easy, and it’s a bit complicated. There are many components that constitute weather. Weather components include rain, cloud cover, sunshine, winds, hail, snow, sleet, storms, thunderstorms, heat waves and many more. These components are sometimes referred as weather parameters or climate elements. Each of these components define weather patterns of a particular area. These components determine the status of local atmospheric conditions. Again, as a basic definition, weather is the state of the atmosphere and majority of weather phenomena occur in the lowest layer of the atmosphere, called as the troposphere. Does it mean that ground conditions such as the topography, water bodies and vegetation of a particular area has nothing to do with it? No, it is not so. The state of the atmosphere is subjected to various processes taking place not only in the atmosphere but also in the ocean, the sea-ice, the vegetation, etc. Weather parameters or the components of weather form a sequence of events, and the influences are far reaching and they do not remain solely in the atmosphere. For example, terrestrial radiation impacts the air temperature, air pressure and humidity. The terrestrial location also influences the cloud formation. The clouds may or may not turn into precipitation depending on the outcome (cloud or rain), which is by and large governed by troposphere. Likewise, a lack of precipitation affects not only weather conditions, but also soil moisture conditions that may result in lowering of water levels (ground water table) in soil. Wind speed and direction are governed by the atmospheric pressure and air temperature. So, all these parameters or components are interrelated and the weather conditions are the outcome of their interactions. Therefore, we can say that, the three main components of weather are temperature, precipitation and solar radiation. These components are influenced by different factors.

3.1 Tomato

Tomato (Lycopersicon esculentum) is an important vegetable crop. Its 2n= 24.

Floral biology

Flowers are borne in small forked racemose cyme. Anthesis starts at 6.30 a.m. and continues up to 11.00 a.m. Anther dehiscence is longitudinal. It occurs 1-2 days after opening of corolla. The stamen sheds its pollen when the style grows up through anther tube, thus self-pollination occurs. When the stigma protrudes above the anther tube, chances of cross pollination through bees increases. The optimum temperature for pollination is around 21°C.

TROPICAL AND SUBTROPICAL FRUITS

2.1 Mango
 

Mango is considered to be an allopolyploid. The chromosome number is 2n =40. The polyembryonic seedlings of cv. Vellaikolumban, earlier reported to be 2n= 80 was later shown to be a diploid. In Canary Island, a putative tetraploid viz Gomera-1 has been identified.

Floral biology

Flower starts opening early in the morning from 4-7 a.m. and maximum flowers open between 9.30-10.30 a.m. and complete 11 a.m. Dehiscence of anthers takes place at 11.30 a.m. and it continues up to 3.45 p.m. The pollen grains are oval, or triangular or oblong. Stigma becomes receptive even 18 hours before flower opening. Mode of pollination is entomophily; nectar is present to attract the insects.

The flowering duration is usually of short i.e. 2 to 3 weeks. The mango inflorescence or panicle bears mainly two types of flowers - male and perfect. The number of flowers per panicle varies between 1000 to 6000 depending upon the variety and climatic factors. The percentage of perfect flowers varies between 0.74 per cent in Rumani, 16.41 to 55.7 per cent in Neelum and up to 69.8 per cent in Langra.

Horticultural crops include the fruit crops, vegetables, spices, plantation crops, medicinal plants, aromatic plants, commercial flower crops and ornamental plants.

Knowledge on the methods by which these reproduce is of primary importance from the standpoint of plant breeding. Besides, their annual or perennial nature also decides the methods of breeding to be adopted to get desired improvement.

Two divisions of methods of reproduction commonly recognized are:

1. Asexual i.e. vegetative parts of the plants are utilized to produce new individuals.

2. Sexual i.e. gametic fusion, the resultant zygote develops into seed which is utilized to produce new individual.

This group can be further placed in several sub divisions according to the mode of pollination. They are

a. Naturally self pollinated crop - (e.g. tomato, pepper, brinjal) wherein cross pollination occurs less than 4 % only.

b. Often cross pollinated crop- (e.g. chillies, bhendi) wherein though self pollination is more frequent, cross- pollination may occur so frequently that some methods of preventing cross pollination between varieties and strains of different genotypic constitution must be followed throughout the breeding programme.
Common breeding methods can be applied to the above two groups, however, the parents chosen for breeding under often cross pollinated crop need to be selfed for few generations to select desirable, homozygous lines.

The Indian Society for Protected Cultivation (ISPC) has organized a National Seminar on ‘Advances in Protected Cultivation’ at the NASC Complex, DPS Marg, Pusa, New Delhi, on 21 March 2013, with an objective of collection and collation of scientific advances made in protected cultivation in India and dissemination of these among policy-planners, farmers, students, scientists, industry and other stakeholders. In spite of the fact that protected cultivation is in its state of infancy in the country in terms of scientific engagements, more than 120 delegates from distant parts of the country registered for the seminar besides good number of policy-planners, recognized names in agriculture and higher officials from industry particularly corporate associate life members of the society.

In the inaugural session, Dr Brahma Singh, President, ISPC and Chairman, Organizing Committee welcomed the Chief Guest Padama Bhushan, Dr R S Paroda, formerly Secretary and Director-General, Indian Council of Agricultural Research (ICAR), New Delhi and Chairman Haryana Kisan Ayog, Chaudhary Charan Singh Haryana Agricultural University , Hisar ; Guests of Honour Dr M M Pandey, Deputy Director-General (Agricultural Engineering), ICAR and Dr H S Gupta, Director, Indian Agricultural Research Institute, New Delhi, other dignitaries on and off the dais, delegates, press and media. He also highlighted that this seminar intended to review the advances made in protected cultivation in India with a purpose to accelerate the same. He emphasized that protected cultivation offers opportunities to earn more from the limited land, water and other resources. It also enables production of quality products which fetch more prices and pride, besides being a potential practice for provisioning disease-free quality planting material for horticultural crops.

Global demand for cut flowers is increasing steadily at around 10 per cent per annum. The share of India in this flourishing trade estimate at over US$ 40 billion per annum is negligible at 0.4 per cent. Floriculture include cut flowers, pot plants, cut foliage, seeds, bulbs, tubers, rooted cuttings and dried flowers or leaves. At international cut flower trade, flowers such as rose, carnation, Chrysanthemum, gerberas, gladiolus, gypsophilla, liatris, nerine, orchids, anthurium, tulips and lilies are preferred. Roses, gerberas and carnation are grown in greenhouses. The open field crops are Chrysanthemum, roses, gaillardia, lily, marigold, aster, tuberose etc. In India, floriculture is emerging as an important economic activity, earning foreign exchange. It has become a potential farm income enterprise. The domestic markets for high-quality flowers have been growing at 10- 20 per cent per year for the last few years. India’s flower business is estimated to be worth $ 400 million at retail, and about $ 100 million in international trade. Flower exports are about $ 30 million, constituting mainly of roses and dried flowers. Both Central and State Governments have been more than proactive and have made large investments in this industry in assisting production and marketing.

A large variety of floricultural crops can be produced in protected environment as economic cash crops for the benefit of farmers. Problems associated with floriculture in hills are small, scattered land holdings and sparsely located population. There is a lack of irrigation facilities due to scarce availability of water resources; widespread natural vagaries like drought, hail storms, frost etc. There is a serious gaps in application of advanced floricultural technologies for improving quality and productivity; high pressure on land use for different purposes like cereal crop production, fodder production, etc. due to low per capita land availability; difficulty in technology dissemination due to difficult terrain, hostile climate, poor communication facilities and sparsely located population. Consuming markets within the state are very less which result in dependence upon distant markets of the county. There is a high post-harvest losses due to lack of modern post-harvest management system; very high temperature differentials in production areas and consumer markets; perishable nature of flowers, resulting in high post-harvest losses during transportation; and distant location of production areas from main roads. High cost of marketing, lack of organised system of marketing, lack of bargaining power with individual growers due to small production levels; inadequate availability of market intelligence to farmers resulting in imbalances in distribution of produce in different markets.

Fusarium wilt of carnation caused by Fusarium oxysporum f.spp dianthi causes severe yield losses under protected cultivation. For the management of Fusarium wilt, 27 isolates of Bacillus strains were isolated from the rhizosphere of different crops including carnation. Among various species of Bacillus, Bacillus amyloliquefaciens (BSC7) was identified as a most virulent antagonistic bacterial isolate. Studies on antagonism under Environmentally Controlled Scanning Electron Microscopy (ESEM), depicted the presence of rod shaped bacterial cells with biofilm formation at 44847x. Detection for the presence of antibiotic biosynthetic genes reflected the presence of surfactin, iturin, bacillomycin and fengycin genes. The 24 isolates of Bacillus spp. showed positive reaction for surfactin gene. Nineteen isolates were amplified for Iturin A gene except BS5, BS9, BSC1, BSC2, BSC11, BSD1 and BSD2. Strains of B. subtilis BS1, BS2, BS5, BS6 and BS8 expressed Bacillomycin D gene. The genomic DNA of strains BS1, BS2, BS4, BS6, BS7 BS8, BS11 and BS14 showed positive for Fengycin D gene. The isolate of B. subtilis BS2 showed positive reaction for four genes namely surfactin, iturin, bacillomycin and fengycin.

In vitro screening of Bacillus, B. amyloliquefaciens (BSC7), P. aeruginosa (P1) and T. viride (TV1) showed highest inhibition against F.oxysporum f.sp.dianthi to an extent of 55.95, 55.29 and 81.61 per cent over the control respectively. The antifungal activity of antagonistic B. amyloliquefaciens BSC7 and T. viride TV1 against F.oxysporum f.sp. dianthi was confirmed under ESEM by observing disintegration, lysis and structural abnormalities of the hyphae of the pathogen at the zone of interaction.

H orticultural crops are most important ones incurring huge amount of pesticides in our country. The intensity of esticides on them is highest per unit area. However research on integrated pest management has not matched the progress and problems of plant protection at large and protected cultivation in particular. The USA, UK, Israel and Russia, pioneers in protected cultivation, are able to harvest productivity of up to 500 tonnes/ha of tomato and 200 tonnes/ha each of cucumber and capsicum, while in India up to 300 tonnes/ha of tomato and 100 tonnes/ha each of cucumber and capsicum are obtained, has compared to normal open field where their yield ranges from 40 to 60 and 10 to 20 tonnes/ha in India, respectively.

The sustainability of an agro-ecosystem is represented by its ability to maintain a given level of productivity over time and a given quantitative-qualitative level of environmental resources (Loucks, 1977). The greenhouse is also a form of agro-ecosystem, where unlike other agro-ecosystems, environment has been adapted to crop in order to maximize its productivity. The greenhouse system has to take maximum advantage of natural benefits offered by location in certain latitudes while minimizing the disadvantages (Castilla, 2002). Higher productivity under such protected cultivation is attainable mainly on account of reduced competition, healthy environment, better nutrient management, increased surface area and longer crop duration. However, ideal and stable environment with warm, humid and abundant food under protected conditions provides an excellent platform for pest development often more than open field crops, leading to severe pest situations in greenhouses, as revealed by extensive surveys.

The beginning of protected cultivation in the country has paved the way for export of horticultural produce, especially of flowers to earn valuable foreign exchange. The technology also became handy for quality production of flowers and F₁ hybrid seeds for domestic and export markets. In view of the globalization of international market and tremendous boost that is being given for export of flowers, there has been a spurt in the demand for protected cultivation technology. Low-cost polyhouses are quite popular in the North-East and in the northern plains, flowers are being raised in polyhouses either for capturing the early markets or to improve the quality of seedlings. Several commercial floriculture ventures are coming up in Uttrakhand, Maharashtra, Karnataka and Tamil Nadu to meet the demands of both domestic and export markets. There has been a substantial increase in area under protected cultivation of different flower crops. Though there were initial hitches owing to the cost sharing, farmers of some states have taken maximum benefits of the existing schemes and adopted the technology. Protected cultivation technology is one of the most useful technology inputs which hold promise to transform Indian floriculture and bring in the “Colour Revolution”.

Nearly, 40 countries are involved in protected cultivation of flower and vegetable crops. New production centers are being added constantly, mostly from developing nations. Today, majority of production is from developing countries like Zimbabwe, Morocco, Kenya, Ecuador, Costa Rica, Mexico, Singapore, Malaysia and India. In developed world, USA has an area of about 6,000 ha under greenhouses which are mostly used for floriculture. The Netherland is traditional exporter of greenhouse grown flowers all over the world. Israel, the largest exporter of cut flowers, has wide range of crops under greenhouses. About 1,000 ha area is under protected cultivation. Approximately, 98% of flowers are grown under open field cultivation and hardly 2% under the greenhouse cultivation.

Orchids are known for their exquisite beauty and trade in global floriculture business. The Netherlands is pioneer in roduction and ex ort of tem erate orchid while Thailand and Hawaii are the world leader in tropical orchids, respectively. Recently, Malaysia, Singapore, Thailand and Sri Lanka are catching the international market. The orchid industry is expanding in terms of magnitude in some of the major orchid-producing nations. The global orchid market has passed $ 1 Billion mark in 2010. The leading orchid producing countries in 2010 are:

Country Production ($ million) Japan 280 USA 170 Taiwan 130 China 70 Brazil 60 UK 45 Thailand 35 Italy 30 New Zealand 20 Source: Orchid News The world consumption of orchids (potted plants) is valued more than $ 500 million (2000). The Dominican Republic, Costa Rica and India have recently begun to produce orchids for export. Commercial production of orchids has increased dramatically through the world in the past quarter century. The most common genera sold in Japan from 1993 to 2002 were Phalaenopsis (30%), Nobile type Dendrobium (20%), Oncidium (20%), Cymbidium (15%) and Cattleya (10%). The potted orchids sold through Dutch flower auctions increased from 50, 0000 to 18 million pots.

India is the second largest producer of vegetable crops with a total production of 146.5 million tonnes (2010-11). More than 60 vegetable crops belonging to, Solanacious, Cucurbitaceous, Leguminous, Cruciferous (cole crops), root crops and leafy vegetables are grown in tropical, subtropical and temperate regions. The demand of vegetables will be 225 million tonnes by 2020 and 350 million tonnes by 2030. A larger quantity of quality seed of vegetable crops will be required in order to achieve the demands of vegetables. The limiting factors which reduce seed yield under open field condition are biotic and abiotic stresses, requirement of isolation distance and generation system of seed multiplication etc. These problems can be effectively managed when we go for seed production under protected structures.

Protected cultivation was introduced in India during 1985 but its progress is slow during the last 25 years due to lack of suitable varieties and hybrids for protected cultivation. Presently, area under polyhouse in India is 2000 ha, therefore, knowledge of polyhouse vegetable production technology of tomato and cucumber with intervention of drip irrigation and fertigation along with suitable varieties will be quite effective for enhancing their productivity. Therefore, it is imperative to develop hybrid seed and production of suitable varieties/hybrids at affordable prices to small and marginal farmers to achieve the targeted production potential of vegetable crops. Keeping in view some genotypes were isolated and pure line and hybrid breeding programme were adopted for improvement of these genotypes. After three years of multilocational testing at tarai, midhills and higher hills under polyhouse condition, four genotypes were identified and released. They are: Pant Parthenocarpic Cucumber 2 (1,755 q/ha) and Pant Parthenocarpic Cucumber 3 (1,605 q/ha) of cucumber and Pant Polyhouse Hybrid Tomato 1 (1,616 q/ha) with average fruit weight of 130-140 g and Pant Polyhouse Tomato 2 (1,291 q/ha) of tomato with single fruit weight 100-105 g. These genotypes were released by Uttarakhand State Variety Release Committee during May 2011 for commercial cultivation.

Kerala has a tropical humid weather characterised by high rainfall and humidity. The intense rainfall during June-September is a limiting factor for vegetable cultivation. High cost of labour, rapid urbanisation, small size of holdings and quality conscious consumers are some of the factors favouring protected cultivation in Kerala. Rain shelters and modified naturally-ventilated polyhouses are recommended structures for protected cultivation of vegetables. The important vegetables grown are cucumber, yard long bean, Capsicum, okra, tomato, cabbage, cauliflower and leafy vegetables. The conventional saw-toothed structure has been modified to suit Kerala weather by making variation in height and improving the roof and side ventilation so that temperature variation inside the structure is only 1°C compared to the ambient. The Kerala Agricultural University has also developed an ad-hoc package for protected cultivation of vegetables, considering the soil and weather parameters and is providing necessary technical support to growers and extension officers. The technology for large-scale production of virus-free vegetable transplants in pro-trays has also been standardized. There is a growing demand for quality, disease-free seedlings and technology can be scaled up into a profitable agri-entreprenurial model. Open field precision farming through fertigation and mulching is profitable compared to conventional system of cultivation. Besides maximising water-and nutrient-use efficiency of the crop, this technology offers scope for mechanisation in vegetable cultivation saving human labour requirement by almost 50%. Rain shelters are useful for year-round production of vegetables in homestead for small growers.