eChapters

• The date is a good source of crystalline sugar.
• It is a dioecious and monocotyledonous fruit crop.
• Dates can be grown in sandy loamy soils.
• Date palm needs 3300 units of heat. (A unit of heat means a degree above a daily mean of 18°C between flowering, fruit development and ripening period.

Cultivars

• Halawi of makes tolerant of rain. It is 28.5 to 42.2 per cent Dakastage Dang Zoo, Hayni Khadrawy, Shamran (Sayen) are tolerant to high humidity. Medjoal, Bastree, Zahidi – is rain and high humidity tolerant.

Dendrobium is a huge genus of orchids. It was established by Olof Swartz in 1799. The name is from the Greek word “Dendron” means “tree” and “bios” means “life”; it means “one who lives on trees”, or essentially, “epiphyte”. The truly spectacular genus Dendrobium contains the largest diversity of horticulturally interesting specimens. More than 1,000 natural species make dendrobium the second-largest orchid genus. Dendrobiums are among the most commonly encountered orchids in the retail trade. Flowers are very long-lasting both on the plant and once cut, looking fresh for up to three weeks or more. Faded flowers on the bottom of the stem can be removed to encourage upper buds to open. Dendrobiums are sturdy orchids that can add a focal point to any room.

ORIGIN AND DISTRIBUTION

Dendrobiums are originally from Southeast Asia. The geographic distribution is from India through China, Japan, Malaysia, Philippines and the islands of the South Pacific with the largest diversity in New Guinea. Dendrobium species are either epiphytic or occasionally lithophytic. They have adapted to a wide variety of habitats from the high altitudes in the Himalayan mountains to lowland tropical forests and even to the dry climate of the Australian desert.

Introduction

Flowering plants (Angiosperms) are identified by their morphological characteristics like flower, fruit and seeds that help their taxonomic characterization into different species, genera, families and orders. The floral characters which are used for taxonomic characterization of plants include the type of inflorescences, perianth structure, floral symmetry, arrangement of floral leaves, type of androecium, stamens, gynoecium, carpel, ovule, etc. The type of fruit and seed also play important roles in taxonomic classification. In this chapter we will briefly discuss about various morphological features of flowering plants (in botanical terms) that are useful in taxonomy.

Nomenclature of Plant

Nomenclature of plant is the formal and scientific naming of plants. It is related to but distinct from taxonomy for grouping and classifying plants and provide botanical name.

The scientific/botanical nomenclature started with Species Plantarum by Carolus Linnaeus in 1753. Botanical nomenclature is governed by the International Code of Nomenclature for algae, fungi, and plants (ICN), which replaces the International Code of Botanical Nomenclature (ICBN).

ICBN and ICN

International Code of Botanical Nomenclature, (ICBN) was adopted by the VIIth International Botanical Congress held in Stockholm, July1950. While the International Code of Nomenclature for algae, fungi, and plants (ICN) was adopted by the XVIIIth International Botanical Congress held in Melbourne, Australia in July 2011.

Moniliformis means ‘like a string of beads’ signifying the arrangement of flowers on the spike. The tree is native of tropical Australia. It is valued for afforestation and beautification. It grows in warm climate under both dry and moist atmosphere. It is a medium-sized, thornless, quick growing, evergreen tree of 13 to 15 m height.

Leaves: True leaves are present only in early seedling stage. The apparent leaves are the modified midrib called phyllode, leathery, sickle-shaped, tapered at each end, up to 18 cm long and 6 cm broad; nerves parallel.

Agroforestry systems are more complex than the agricultural systems. The long-term nature of trials involving woody species and the varying objectives of agroforestry trials demand that adequate caution be exercised in their design. Several characteristics of the trees like slow growth, long-term effects on their surroundings, long life, age of trees, the area over which the influence of trees extend, etc. complicate the issue of designing experiments for these systems. Agroforestry experiments are often established on marginal sites which include sloping lands, and sites with infertile and degraded soils. It is thus difficult to find homogeneous sites of such problem areas, especially sloping lands where plots along contour lines are long and linear. Germplasm of many agroforestry tree species are usually collected from different origins which lack uniformity. Therefore, experimental materials in an agroforestry experiment may not be of uniform quality.

There are several features of agroforestry systems that require some modification of the methods usually used in agricultural experiments. Important issues related to agroforestry experiments include

ABSTRACT

Bio-engineering is the use of vegetation, either alone or in conjunction with civil engineering structures, to reduce instability and erosion of slopes. Such structures are advocated in hilly area mainly because they provide one of the best ways to armour slopes against erosion. Bio-engineering, in the context of upland slope protection and erosion reduction, combines mechanical, biological, and ecological concepts to arrest and prevent shallow slope failures and erosion. This chapter presents the design consideration and construction practices for stabilization of slopes using bioengineering technologies along with a brief review on the salient features and characteristics of the bioengineering processes.

New varieties of bougainvillea have been developed in India at different research institutions, nurseries, botanical societies and also by individual efforts. Details have been mentioned above. New varieties developed at CSIR-NBRI need special mention. 

CSIR-NBRI has developed a number of new varieties by using various available breeding tools viz. through spontaneous mutation, classical breeding, chromosome manipulation and induced mutation (Banerji 2007, 2008, Banerji and Datta 1986, 1988, 1993, 1996, Banerji et al., 1987, Data and Banerji 1990, 1994a,b, Datta 1992b, 2004, Nath et al., 1983, Ohri 1995, Sharma 1996, Zadoo et al., 1975b, Jayanti et al., 2007, Roy et al., 2015).

Dietary constitution of Indian people is mostly cereal based. However, the cereals supply chiefly carbohydrates. Therefore, there is deficiency of protein, minerals and vitamins, especially vitamin A, riboflavin, vitamin C, etc. in the diet. The dieticians advocate the intake of 125 g leafy vegetables, 75 g other vegetables and 100 g root and tuber vegetables (total 300 g) everyday because vegetables provide all the nutrient components like carbohydrates, protein, fat, minerals, vitamins and water along with roughages, which are the essential constituents of a balanced diet.

India has attained food security by increased cereal production due to green revolution. In case of vegetables, although there has been increase in production from 15 million tonnes during 1950 to 94 million tonnes in 2005 but still more vegetables are needed to meet the minimum requirement of at least 250 g per day per capita. There has also been increasing demand for fresh export and for processing industries. Moreover, there is a pressure for increasing vegetable supply caused by constantly increasing population in a world of limited acres.

Addition of new agricultural land is of course not possible. In this situation, plant breeding can be expected to contribute substantially to greater vegetable productivity. This can be accomplished not only by the breeding of basically higher yielding varieties but also by the development of varieties that help to stabilize production through resistance to various biotic and abiotic stresses.

Digging and Filling of Pits

1.    Marking of pits and planting should always be done with the help of planting board.

2.    The guide pegs are installed at both the ends.

3.    One meter deep pits of one meter diameter should be dug.

4.    Top 30 cm soil should be kept on one side, which is used for refilling the pits as it is fertile soil.

5.    Bottom 70 cm soil should be kept on other side, which is discarded.

6.    The pits should be left exposed for a few days before actual planting.

7.    These pits should be refilled with mixture of topsoil, 2-3 baskets of silt and 2-3 baskets of well-decomposed farmyard manure.

8.    The refilled pits should be watered a few days before planting the tree. To each pit add carbofuron (25g) for control of white ants.

Digital technologies are transforming horticultural production by enabling data-driven crop management and precise decision-making. This chapter introduces agricultural informatics, sensors, Internet of Things, remote sensing, drones, artificial intelligence, machine learning, geographic information systems, robotics, and precision technologies. These tools can support crop monitoring, disease detection, irrigation scheduling, nutrient management, yield prediction, phenotyping, and resource optimization. AI-based image analysis can identify symptoms and assist in early crop diagnosis, while sensors provide continuous information about soil and plant conditions. The chapter emphasizes the integration of digital data with practical horticultural knowledge to improve productivity, profitability, sustainability, and resilience while reducing unnecessary inputs and improving decision-making.

INTRODUCTION

Nearly 60% of the population of the country is dependent on agriculture. Rainfed agriculture supports 40% of the population and 75% of the poorest of the poor in the country (Pant 2001). Therefore, maintenance of health of production base stands as a prime goal to be achieved for sustainable production, prosperity and posterity. Tree culture is highly necessitated for amelioration of climate, soil, production of firewood, fodder, timber, fibre, fruit, gum etc. Hence, agroforestry is a viable option particularly in the Indian context.

Common name, symptoms of damage and management of diseases of major spices and condiments

INTRODUCTION

Indigenous agroforestry systems exhibit a great intricacy with respect to their components where trees, shrubs, climbers and grasses are common. In the north-western Himalaya, farmers maintain naturally regenerating tree/shrub species, particularly on edges of terraced agriculture fields without any significant input of manpower. These systems are called as indigenous agroforestry system (Ram and Singh 1996; Vishvakarma et al. 1998, Thakur et al. 2004 and 2005). Shrubs have been meeting the fuel wood requirement of the local peasants from forest as well as village wasteland and field boundaries. Shrub dominated ecosystems extend from arctic to tropical region and occur over the entire moisture gradient from desert to wetland (Specth 1979; DI Castro 1981; West 1983). 

INTRODUCTION

The entire Himalayan region is vast and its diverse geographical grouping is unique and has complex ecosystem and occupies about 18% of the total geographical area of India. Indian Himalaya (27O 50' – 37O 06' N and 72O 30' – 97O 25' E) includes the parts of trans, north-west, west, central and east Himalaya and covers approximately an area of 4,19,873 Km2 with 2500 Km length and 240 Km width. The north-western Himalayas generally represent the Himalayan tract from Kumaon in Uttar Pradesh to Chitral in Gilgit. The Himalayan ranges situated in this region exhibit a diverse climate, topography, vegetation, ecology and land use pattern. The annual average rainfall varies from 8 cm in Ladakh to over 200 cm in some parts of Himachal Pradesh and Uttar Pradesh. The vegetation may vary from the scrub in the lower hills to arctic in the Greater Himalayas. The unique physiography, climatic conditions and soil characteristics of the area has resulted in a variety of habitats and a significant biological and cultural diversity. Along the altitudinal gradient (300-800 m.a.s.l) the vegetation varies from sub-tropical, temperate, sub-alpine to alpine types. It supports about 8000 species (47.06% of the total flowering plants of India) of which 30% are endemics, 10.2% trees, 8.44% wild edibles and over 15% medicinal (Samant and Dhar 1997).

Delineating species boundaries correctly and also identifying species are crucial to the discovery of life’s diversity because it determines whether different individual organisms are members of the same entity or not (Dayrat, 2005). The identification of species depends on the knowledge held by taxonomists whose work cannot cover all taxon identification requested by non-specialists. To deal with these difficulties, the ‘DNA Barcode of Life’ project aims to develop a standardized, rapid and inexpensive species identification method accessible to non-taxonomists.

DNA barcoding is a technique in which species identification is performed by determining and comparing the sequences of several hundred base pairs of nucleotides from a small fragment of an identified gene, with the aim of contributing to a wide range of ecological and conservation studies in which traditional taxonomic identification is not practical (Krishnamurthy and Francis, 2012). The two main ambitions of DNA barcoding are to assign unknown specimens to species and to enhance the discovery of new species and facilitate identification, particularly in cryptic, microscopic and other organisms with complex or inaccessible morphology (Hebert et al., 2003a). Apart from these, identification of species previously defined by other criteria to also is an objective of barcoding. Another major objective could be the definition of operational units for ecological studies. This may also be used for forensic purposes by linking the specimens with already identified databases.

A laboratory is essential for research work in science and development. Most of the research institutes have dedicated laboratories for researchers and students to conduct experiments, perform research work, as well as to provide hands-on learning/training to students. There are certain rules and regulations laid down by the laboratory in-charge which need to be followed strictly for safety purposes. Some of the laboratories keep ‘safety manual’ for researchers to read before entering into the laboratory to conduct experiments. Whenever safety is compromised in a laboratory, there is increase in risk of unwanted incidents in the laboratory. Storing food/beverages in the same refrigerator where laboratory chemicals are kept may lead to disastrous effects on health. This chapter aims to provide instructions in brief on the things to be performed (Do’s) before and after entering onto a laboratory as well as the things never to be done (Don’ts) in a laboratory for the safety reasons.

Good Laboratory Practices (Do’s)

• P Wear apron/labcoat while working in the laboratory.
• P Use gloves/respiratory mask/fumehood while handling toxic/volatile/inflammable chemicals/reagents.
• P Use pippet or pippetor for safety in transfer of solutions.
• P Protect eyes, face and naked parts of the body from UV radiations. Use safety goggles or face mask/apron.
• P Keep your eyes away from Liquid Nitrogen and use cryogloves while handling it.
• P Arrange all the necessary materials/solutions before starting the experiment.
• P Periodically fumigate/ozonize culture and inoculation rooms.
• P Autoclave all contaminated materials before discarding.
• P Pre-treat gel or solution containing Ethidium Bromide (EtBr) before discarding into laboratory waste-disposal bin, and use gloves while handling them.
• P Burn all the transgenic plant materials in an incinerator after taking necessary observations.
• P Make entry in the designated log-book and clean the instrument after using it properly.
• P Switch-off the instrument after use or when not in use.
• P Wash hands with soap and remove the labcoat before leaving/going out of the laboratory7.
• P Ensure that switches for fans/lights, and water taps are off while leaving the laboratory.
• P Follow the biosafety guidelines suggested for handling and disposal of the hazardous chemical.

Introduction

While experimenting with chemicals, sometimes we need to dry the chemical/ solution (solid, liquid or gas) using a process like evaporation or distillation, mainly to remove water or different solvents. Drying is the process of evaporation or distillation to remove water/solvent from a solution, solid or even from gas. Generally, a drying agent (usually an anhydrous inorganic salt) is used for this process, which reacts with the water (present in the chemical/ solvent to be dried) to form a hydrate. For example, anhydrous MgSO4 is one of the drying agents. The drying agents are recognized by their capacity (the rate at which they absorb water) and their intensity (the amount of water left behind in the solvent at equilibrium). No chemical reaction or change in phase occurs during the drying process.

Type of Solvents

Apart from water (a universal solvent), there are three families of organic solvents used in laboratories.

1) Oxygenated solvents: Alcohols, Ketones, Glycol ethers, Glycol esters, etc.

2) Hydrocarbon solvents: Aliphatic and Aromatic hydrocarbons.

3) Halogenated solvents: Chlorinated hydrocarbons.

Bougainvillea plants are native of South America from Brazil west to Peru and south to southern Argentina (Chubut Province). A native to coastal Brazil, the bougainvillea was discovered in 1768 in Rio de Janeiro by French naturalist Dr. Philibert Commerçon (also sometimes spelled Commerson). The plant is named after his close friend and ship’s admiral Louis-Antoine de Bougainville, who commanded the ship La Boudeuse that sailed around the world between 1766-1769, and in which Commerçon was a passenger. Twenty years after Commerçon’s discovery, it was first published as ‘Buginvillea’ in Genera Plantarum by A.L. de Jusseau in 1789. The genus was subsequently spelt in several ways until it was finally corrected to ‘Bougainvillea’ in the Index Kewensis in the 1930s. Originally, B. spectabilis and B. glabra were hardly differentiated until the mid 1980s when botanists recognized them to be totally distinct species. Bougainvillea spectabilis Willd., a native of Brazil reported to be found wild in all provinces of that large country (Taillemite 1977, Forzza 2010). The oldest herbarium specimens of Bougainvillea spectabilis Willd. were collected during the brief stop of the Étoile in Rio de Janeiro. Two are kept in the General Herbarium of the Muséum National d’Histoire Naturelle in Paris (P 00169376, images in Monnier et al. 1993 : 176 and Jolinon 2004 : 79; P 00307018), and two in the Jussieu Herbarium conserved in the same institution (PJuss.; IDC 6206, No.