eChapters

Introduction Papaya fruit is listed under the family Caricaceae. This family has total four genera all over the world. There are about four species found in India under the Carica L. genus. Carica papaya L. is one of the species among them and it is most widely cultivated and very well-known species in India (Kumar and Devi, 2017). It has a thin, little shiny, and green-colored peel which turns into orange colored after ripening. The size of the fruit varies from 5.5 to 5.9 cm in terms of diameter. Papaya has several industrial applications in food processing, pharmaceutical as well as cosmetic industries. According to the FAO (Food and Agriculture Organization, 2013), India, Indonesia, Brazil, the Dominican Republic, Nigeria, and Mexico are the countries that produce the largest number of papayas in the world, India being the largest producer (4457.1 tonnes) followed by Brazil (1859.3 tonnes) in the year 2011.

Abstract

The natural color of foods is due primarily to carotenoids, anthocyanins, betanin and chlorophylls, either as inherent food constituents or as food or feed additives. These compounds have drawn considerable attention in recent years, not because of their coloring properties, but due to their potential health-promoting effects. Their occurrence and levels in foods, along with the factors that influence the composition, have been widely investigated. Processing effects have been actively studied. In spite of the intense search for plant and microbial sources and efforts to increase yield, few natural food color additives have reached the market. Developing new colors for the food industry is challenging, as colorants need to be compatible with a food flavors, safety, and nutritional value, and which ultimately have a minimal impact on the price of the product. In addition, food colorants should preferably be natural rather than synthetic compounds. Micro-organisms already produce industrially useful natural colorants such as carotenoids and anthocyanins. Microbial food colorants can be produced at scale at relatively low costs. This chapter highlights the significance of color in the food industry, why there is a need to shift to natural food colors compared to synthetic ones and how using microbial pigments as food colorants, instead of colors from other natural sources, is a preferable option.

Abstract

In biocatalysis, isolated enzymes, enzyme mixtures, immobilized enzymes or microbes (enzymes that are still present within the living cells) are used to perform chemical transformation of organic compounds into novel compounds. Both in academia and across chemical and pharmaceutical industry, biocatalysts are used as isolated preparations or in whole cell format or as recombinant proteins produced in alternate host cells. Biocatalysts catalyze novel small molecule transformations that are usually difficult or impossible using traditional synthetic organic chemistry. Biocatalysts exhibit high chemoselectivity, regioselectivity, diastereoselectivity and enantioselectivity towards their substrates. As a result, the use of biocatalysts during chemoenzymatic synthesis minimizes the issues of unwanted side-reactions such as decomposition, isomerization, racemization and rearrangement. The process of biocatalysis has become an important tool in the synthesis of active pharmaceutical ingredients (APIs) and enantiopure compounds. Biocatalysis offers a more sustainable, efficient, and less polluting methods for the production of APIs and advanced pharmaceutical intermediates. Biocatalysts have received tremendous attention in pharmaceutical industry because they typically catalyze reactions under mild conditions, so they do not consume much energy or emit much greenhouse gas. Biocatalysts are currently employed for the development of products in different fields, such as pharmaceuticals or intermediates of their production (e.g., antibiotics, statins, and enantiopure building blocks), fine chemicals (e.g., amino acids and vitamins), and food ingredients (e.g., sweeteners, lipids, and nutraceuticals). However, it would be helpful for the pharmaceutical industry to take advantage of developments in biochemistry, molecular cloning, random and site-directed mutagenesis, advanced tools for enzyme discovery, enzyme-directed evolution, high-throughput laboratory evolution techniques for biocatalyst optimization, immobilization, and fermentation technology to gain access to a new class of biocatalysts (enzymes), cells and other microbes.

Abstract

Fruits like orange (citrus sinensis), mango (mangifera indica), banana (musa paradisiaca), guava (psidium guajava) and pomegranate (punica granatum) contain numerous vitamins, minerals, fibre. These fruits also contain phytochemicals, antioxidant and bioactive compounds including alkaloids, flavonoids, tannins, saponin, terpenoids, which enhance the nutritional value and reduce the free radicals and oxidative stress in human body. These fruits also show the anti-cancer, anti-bacterial, anti-fungal, anti-inflammatory, anti-arthritic, anti-obesity, anti- diabetic, anti-proliferative, anti-hypertensive properties and are very effective against the pathogenic bacteria, which causes the harmful disease in human body. The chapter provides the production data of these fruits in different countries, their bioactive compounds and their utilization in the pharmaceutical, cosmetic and food industries.

Abstract

Water is very essential nutrient and total of only 3% pure water is present on earth. Some natural, anthropogenic and human activities discharge wastes, containing heavy metals into the different water resources and ultimately destroying the ecosystem. Numbers of methods are used for water purification like conventional (includes physical and chemical) and biological. Conventional methods are expensive, generate large quantities of sludge and inefficient at low concentrations of metal. Biological method includes biosorption and bioaccumulation, are ecofriendly and economic and have advantages over conventional methods. Biosorbent material includes microbial biomass, agro-wastes, and industrial by-products are used to treat heavy metal from liquid samples. Actually these biosorbent have number of functional groups on their surfaces which help in binding of metal from aqueous solution. In this article, biosorption of zinc, arsenic and copper are described through lactic acid bacteria that are not harmful, nonsporulating, fastidious, fermentative and generally regarded as safe. Many of these species are probiotic and producing exopolysaccharides and biofilms. It has great resistance to survive in gut environment and efficiency to biosorb metal from gut. It has some significant characteristics that represent a useful tool for decontamination of food and beverages from heavy metals. Biosorption mechanism and factors behind the process make these strains competent of removing these heavy metals.

Abstract

Starch is an important plant-based product and an abundant biomaterial, used worldwide for different purposes in many industrial sectors including food, health, chemical and engineering sector. Starch versatility in industrial applications is largely defined by its physicochemical properties and functionality. Starch in its native form has limited functionality and application but advancements in technological processing have led to the wide-range modification of starch for different purposes. It can be easily degraded by microorganisms hence is a natural source of bioenergy in the form of bioethanol and biohydrogen as well as in the development of biodegradable packaging materials. Various technological interventions can significantly improve the characteristics of native starch and be tailor-made to the specific needs of the packaging and food industry. Native starch can be treated by various methods to modify its characteristics. Modification improves starch paste clarity, viscosity, syneresis and freeze-thaw stability leading to a wide range of food applications. Esterification lowers gelatinization temperature and retrogradation lowers the tendency to form gel and higher paste clarity which shows applications in refrigerated and frozen foods, as emulsion stabilizers and for encapsulation. Cross-linking increases the stability of granules towards swelling, high temperature, high shear, and acidic conditions. Starch-based nano-composite polymers have their application in coating and packaging of food as well as non food commodities. Techniques involving extrusion, casting, spinning, and nanotechnology can be used in the production of films, foams, and nanocomposite materials. Due to the unique characteristics of resistant starch, it is being used as a valuable supplement in the formulation of drugs, pharmaceuticals, various functional foods and in the microencapsulation of probiotics and bioactive compounds.

Abstract

Dietary fibre concentrates (DFC) are the major component of fruit by-products generated during the processing at commercial level. These are the blessings for human gut health along with many other positive health benefits. Fruit by-products are the so-called nuisance for the environment that enfolds numerous positive signs inside. Lignin, cellulose, hemicelluloses, pectin, waxes, mucilage’s, oligosaccharide, gums and many other associated compounds are the part of DFCs. These DFCs when taken in the form of functional ingredient reaches to the colonic microbiota and consequently provides them a healthy growth medium that promotes the cell metabolism upto 67%, enhances the growth of good gut bacteria like Bifidobacterium and Lactobacillus. This article enlightens the content of DFCs in various fruit by-products that shows their prebiotic potential.

Abstract

Enzyme is a highly efficient catalyst that is produced by active cells. When compared to chemical catalysts; enzymes have a number of benefits, including high specificity, high catalytic efficiency and flexible activity, all of which greatly help to promote their use in the pharmaceutical, chemical, and food sectors. The majority of enzymes such as protease, amylase, lipase and cellulase are relatively unstable and industrial uses are frequently restricted by a lack of long-term operational stability as well as the technically challenging recovery process and ruse of the enzyme. Enzyme immobilization provides an excellent base for increasing enzyme availability to the substrate with higher turnover over a long period of time. Enzyme immobilization are done by several methods and their performance are influenced by many factors. Physical and chemical based immobilization are the most commonly used methods. The matrix immobilizes the enzyme by holding it permanently or temporarily for a short stretch of time. The generally used matrixes for immobilizations includes natural, synthetic polymers and inorganic compounds.Currently, synergistic interactions of biotechnology and nanotechnology are useful for the development of immobilized enzymes. Enzyme immobilization is a commonly used technology in a variety of industries including food, pharmaceuticals, bioremediation, detergents, and textiles due to technical and economical advantages. This chapter focuses on most commonly used immobilized techniques in industry with many recent applications of immobilized enzymes.

Abstract

The waste utilization as derivative from different food processing sector has been emerged as the main challengeable problem around the world due to the generation of by-products at large quantities consisting seeds, peels, rags, unused flesh, bran, husk, germ, stalk etc. during various processing chain steps. Though these food by-products are potentially rich source of natural compounds which finds its wide utilization in different industries as affordable, cost-effective, novel ingredient comprising dietary fiber, phytochemicals, antioxidants, pectin, enzymes, organic acids, food additives, essential oils etc. subsequently after extractions, purified fractionation and fermentations methods. These food byproducts also have pharmaceutical and nutraceutical activity. A nutraceutical is like a medicine or food grade product, which not only provides physical benefits and nutritional supplements but also protects against various chronic diseases. This food processing waste utilization should be a topic of interest, by means of two ways, i.e., through waste quantity reduction and increased value-added food products production and also as renewable energy source. The purpose of this study is to highlight the opportunities to utilize food by-products from various food processing industries and to encourage the vital exploitation of the by-products containing large number of bio-active compounds having nutraceutical potential.

Abstract

Bioprocessing is much greener than chemical methods, since biocatalysts (enzymes or cells) involved are extremely selective, producing higher product yield with less or no by products, which are basically difficult to separate. Biotechnology can offer both economic and environmental benefits to the chemical industry and thus has great potential to achieve the sustainable production of existing and new products from renewable feedstocks. Fuel and energy production from biomass are major market sector for bioprocessing. They are considered in the manufacturing of biopharmaceuticals, food, food additives, chemicals, and several other products. Generally, a bioprocess involves feedstock pretreatment, fermentation or biocatalysis, and downstream processing for obtaining product and its purification. It is explored for the production of xylitol, fatty alcohol, butanol and biorefinery. Deep understanding of the process is required to create robust control strategy. Based on the requirements, sophisticated instrumentation and complex control laws or simple control law having intricate monitoring system can be selected. Supercritical fluids (SCFs) are advantageous for bioprocessing due to its transport properties, high diffusivity and low viscosity facilitate mass transfer phenomena, variation of pressure and/or temperature are adjusted providing high flexibility in the extraction of metabolites from cells. Microfluidic devices in which small amounts of fluids (10^-9 and 10^-18) are manipulated have emerged for high throughput applications. Automation of the optimization processes is enabled through microtiter plates with simplicity and operate with very small volumes. Therefore, more research is necessary to develop integrated processes that will allow combining one or more techniques to enhance bioprocessing at lower costs.

Abstract

Fermentation technology holds immense promise in diverse fields. It offers opportunities for sustainable biofuel production, allowing us to reduce our reliance on fossil fuels and promote a greener energy sector. In the pharmaceutical industry, fermentation plays a vital role in manufacturing antibiotics, enzymes, vaccines, and therapeutic proteins, paving the way for more efficient and cost-effective production processes. Furthermore, fermentation can be harnessed for waste management and environmental remediation, enabling the transformation of organic waste into valuable biogas. With ongoing advancements, fermentation technology continues to open new avenues for innovation and contribute to a more sustainable and environmentally conscious future. The present chapter compares types of fermentation process as well as gives an insight into various industrial prospects of fermentation technology.

Abstract

Fermentation in food processing is the process of converting carbohydrates to alcohol or organic acids using microorganisms; yeasts or bacteria under anaerobic conditions. Fermentation usually defines the desirable action of microorganism to enhance food safety by inhibition of pathogens, modify their sensory properties, improve their nutritional value by removing anti-nutritive compounds and by enhancing bioavailability of components. Pulses and Legumes are the major source of dietary nutrients all over the world. Fermentation can be the most simple and economical way of improving their nutritional value, sensory properties and functional qualities. Pulses and legume based fermented food products offer opportunities to include probiotics, prebiotics and fibers in the human diet. In the Indian subcontinent, making use of fermented food and beverages using local food crops and other biological resources is very common, although the nature of the products and the base material varies in different regions. This chapter focuses on some of the indigenous fermented foods produced in the country that have not received the scientific attention they deserve in the last decades. Products produced from different pulses and legumes substrates fermented by lactic acid bacteria, yeast and/or fungi are included.

Abstract

Bioinformatics is an interdisciplinary field which plays a major role in various disciplines including drug discovery, pharmacogenomics, proteomics, comparative genomics, microbial genome applications in biotechnology. Food plays a vital role in various processes in body and also helps in controlling various chronic diseases. Food safety and food processing are very crucial factor for human lives. Bioinformatics has been successfully applied in food industry for improving various factors of food such as flavor, taste, allergenicity, probiotics, optimizing the quantitative and compositional parameters for food processing and assessing the food safety. In this chapter, we have given an overview about the role of bioinformatics in food industry.

3.1. Origin and distribution

• Originated in the Southern Europe, Mediterranean region and grows throughout Northern, Eastern, and Western hemispheres specifically in Asia, Rumania, North America, Europe, India, Russia, Germany and France.

• In India, cultivated in Rajasthan, Andhra Pradesh, Punjab, Madhya Pradesh, Uttar Pradesh, Maharashtra, Gujarat, Karnataka, and Haryana.

3.2. Economic importance

• The leaf stalks are used both as vegetable and salad.

• A common practice in most Indian households is to have few fennel seeds at the end of every meal to freshen the mouth.

• Used for various digestive problems including heartburn, intestinal gas, bloating, loss of appetite and colic in infants.

• Source of copper, potassium, calcium, zinc, manganese, vitamin C, iron, selenium and magnesium.

• The seeds are used as condiment

• Seeds yield 4-5% volatile with anethole as major constituent.

Abstract

This chapter presents the principle of fluidisation and its use in drying of food materials. Being a convective drying process, capacity and kinetics are limited by process conditions and material properties. The influences are discussed as well as presenting the main equations that describe drying in fluidised beds. The main focus lies on hot gas drying, additionally superheated steam drying as well as atmospheric fluidised bed freeze drying and microwave-assisted fluidised bed drying are presented and discussed.

Abstract

Mushrooms are the fruiting bodies of fungi, a group of organism that is different from fruits and vegetables. They are a rich source of good quality protein having more essential amino acids and vitamins with low calories. There are about six commonly known edible mushrooms throughout the world with button mushroom (Agaricus bisporous) being the most familiar and commercially important variety. Mushroom is a highly perishable product with a shelf life limiting to a few days. Soon after harvest, it starts to undergo physiological disorders like shriveling, wilting, liquefaction, browning, textural as well as weight losses and flavour changes. The main responsible factors for the quality deterioration after harvest are respiration rate, browning, bacterial spoilage of mushrooms, temperature and relative humidity. Because of its limited shelf life under ambient conditions of temperature and humidity, the preservation of mushrooms is a matter of concern. Various techniques have been involved in the extension of shelf life of mushrooms including chemical treatments, cooling, modified and controlled atmospheric storage, radiation, drying etc. Drying is one of the most accepted and effective methods for the long term storage of mushrooms. Mushrooms preserved by drying have a pleasant flavour and are used as an important ingredient in several food formulations including salads, instant soups, meats and rice dishes. Various drying processes like sun drying, hot air drying, freeze drying, vacuum drying etc. can be used for the long term storage of mushrooms. As mushrooms are sensitive to temperature, determining the right drying method is the key for the successful and effective operation of the system. The different operating conditions involved in various methods of drying affect product quality considerably. The effect of drying methods on the process and the quality of the dried mushroom is explained in detail in this chapter.

Abstract

Vitamin C is one of the most important phytochemicals and can be found in almost all fruits and vegetables. Since it covers almost all eventualities, being water solute and prone to leaching from cells, thermally labile (one of the most labile vitamins), pH-, metal ion-, light-sensitive, as well as readily oxidizable by ascorbic acid oxidase, vitamin C is selected as the most frequently measured nutrient to evaluate the nutrients loss during thermal processing. It is generally accepted that if vitamin C is well preserved, the other nutrients are also well retained. Higher retention of vitamin C in processed products is highly desired. Herein this chapter reviews the degradation mechanism and kinetics of vitamin C of fruits and vegetables during thermal processing, such as blanching, drying, cooking and frying. It starts with an overview of the functions of vitamin C in human’s health. Then the current status for understanding of the degradation kinetics of vitamin C during thermal processing was outlined, followed by the discussion of its degradation mechanism. At last, potential strategies or alternatives to keep vitamin C are identified and discussed.

1. Introduction

The emergence of food borne illness due to contaminated food is one of the most frequently occurring event and challenge for the food processing industry. This has resulted into economy as well as energy requirement to counter the food borne pathogens. Some of the important pathogenic microorganisms of concern are E. coli, Listeria monocytogenes, salmonella, etc. To address the food safety and quality issues, several non-thermal food processing technologies have been developed in the last decades, with an aim of achieving food safety without significantly affecting the quality of the food product. Cold plasma in one of the non-thermal processing technology, which has shown promising results as evidenced by recent scientific investigations.

The plasma is known as fourth state of matter after solid, liquid and gas state. Plasma contains diversity of energetic species including ions, electrons, atoms, excited molecules and charged particles. In a plasma, a significant number of electrons have such a high energy that no nucleus can hold them. When a gas is subjected to heat or an electric field, some of the atoms become ions and the gas is said to be ionized. An ionized gas in its normal condition, can conduct electric current to a limited extent. If the heat or electric current becomes extreme, many of the atoms become ions. The resulting super ionized gas, which can conduct a large and sustained electric charge. Plasmas are used in several materials processing industries like textiles, electronics, paper and glass industries etc.

1. Introduction

Biopolymers nowadays are grabbing a nice place in packaging industries replacing synthetic polymers. The most important advantage of biopolymer over synthetic polymers is that they are biodegradable and can be developed from agricultural or food processing wastes. Among the wide variety of materials currently used in food packaging, polymers have taken a major share because of their versatility and advantageous performance (Valdés et al., 2014). However, most polymers used for food packaging are not biodegradable or compostable and therefore represent an increasingly serious end-of-life disposal problem worldwide. Although food package stability during the shelf-life of the product is an advantage, it turns into a disadvantage when the packages enter the post-use phase.

15.1    Banana Chips/Crisps
    
15.2    Banana Puree/Pulp
    
15.3    Banana Flour
    
15.4    Banana Powder
    
15.5    Banana Flakes
    
15.6    Banana Figs or Dehydrated Banana
    
15.7    Banana Jam
    
15.8    Ready-To-Serve (Rts) Beverage
    
15.9    Banana Beer and Wine
    
15.10    Banana Vinegar
    
15.11    Banana Catsup
    
15.12    Banana Inflorescence Relish
    
15.13    Candied Banana
    
15.14    Other Banana Based Products

1. Introduction

The growing prevalence of obesity and obesity associated disorders as well as its impact on public health has received increased attention in recent years. As a result, obesity is now considered one of the world’s leading public health problems. A study published in the noted medical journal Lancet says India is just behind US and China in this global hazard list of top 10 countries with the highest number of obese people. The study - titled ‘Global, regional, and national prevalence of overweight and obesity in children and adults during 1980-2013: A systematic analysis for the Global Burden of Disease Study 2013’ - used data collected by international bodies and organizations in various countries like India over three decades. China and India together accounted for 15 per cent of the world’s obese population, with 46 million and 30 million obese people, respectively. According to the study, the number of overweight and obese people globally increased from 857 million in 1980 to 2. 1 billion in 2013. This is one-third of the world’s population.

With lifestyle disorders forcing more and more people to reel under excess body weight, even relatively younger people are developing joint disorders and knee pain. Excessive weight is associated with a series of health problems, including blood pressure, diabetes, and cardiovascular ailments. Therefore there in an urgent need to envision effective anti-obesity strategies through effective interventions.

1    Biological Hazards
    1.1    Bacterial hazards
    
2.     Fungal Hazards
    
3.    Viral Hazards
    3.1     Hepatitis A virus
    3.2       Norwalk virus
    
4.    Parasitic Hazards
    4.1     Parasitic worms
    4.2    Protozoan parasites
    
5.    Aquatic Biotoxins
    5.1    Paralytic shellfish poisoning (PSP)
    5.2    Diarrheic shellfish poisoning (DSP)
    5.3    Amnesic shellfish poisoning (ASP)
    5.4    Ciguatera fish poisoning (CFP)
    5.5     Puffer fish (Tetrodotoxic) poisoning (PFP)
    
6.    Pathogen Survival Through Cooking
    
References

1. Introduction

The term nanotechnology was first coined by Norio Taniguchi in 1974 to describe controlled thin film deposition (Taniguchi, 1974). Nanotechnology is now generally recognized to include materials with a size in at least one dimension in the 1-100 nm range, although this terminology is not strictly enforced (Rao, 2008). In food science, there are many types of naturally occurring particles that fall within this size range and the use of a strict definition is problematic due to the large distribution of sizes (Kruif, 1998). Many natural foods contain nanoscale components and their properties are determined by their structure. These have been eaten safely for generations. In fact, some of food’s most important raw materials (proteins, starches, and fats) undergo structural changes at the nanometre and micrometre scales during normal food processing(Morris and Parker 2008). Food proteins (for example, native beta-lactoglobulin, which is about 3. 6 nm in length) can undergo denaturation (via pressure, heat, pH, etc. ) 

1.    Introduction
    
2.    Resources
    2.1    Crustacea
    2.2    Zooplankton
    2.3     Mollusca
    2.4     Insecta
    2.5     Thallophyta
    
3.    Biosynthesis
    
4.    Structure
    
5.    Detection and Estimation of Chitosan
    
6.    Specification of Chitin and Chitosan
    
7.    Economics of Chitin Recovery and Production
    
8.    Social and Economic Value of Chitosan
    
9.    Production of  Chitosan from Chitin
    
10.    Production of Glucosamine Hydrochloride
    
11.    Recent Advances in Applications of Chitin and Chitosan
    11.1    Applications of chitin, chitosan and glucosamine hydrochloride
    
12.    Advantages of Chitosan
    12.1    Cholesterol and overweight lowering
    12.2    Cholesterol lowering in Human
    12.3    Osteoarthritis prevention and Treatment
    12.4    Carrier for nasal application of drugs
    
13.    Conclusion
    
References and Further Reading

1.    Introduction
    
2.    Edible coatings used in Seafood Products
    2.1    Pre-dust
    2.2    Batter
    2.3    Breading
    
3.    The Coating Process
    3.1    Portioning
    3.2    Pre-dusting
    3.3    Application of batter
    3.4    Application of breading
    3.5    Pre-frying / Flash frying
    3.6    Freezing
    3.7    Packing and storage
    
4.    Coating Process Equipment
    4.1    Forming machine
    4.2    Pre-dusting machine
    4.3    Batter application equipment
    4.4    Breading application equipment
    4.5    Fryers
    4.6    Spiral freezers
    
5.    Coating Process Lines
    5.1     Single line breading system
    5.2     Tandem line breading system
    5.3     Tempura or batter-fry  Line breading system
    5.4     Tempura-Japanese Line breading system
    
6.    Coated Fishery Products
    6.1    Fish fingers
    6.2     Coated fish sillets
    6.3     Fish mince based coated products
    6.4     Coated shrimp products
    6.5     Coated squid products
    6.6     Coated bivalve products
    6.7     Crab claw balls
    
7.    Common Quality Problems Encountered during the Coating of Seafood
    7.1     Voids
    7.2     Blow off
    7.3     Pillowing
    7.4     Tailings
    
8.     Innovative Processes in the Production of Coated Products
    
References

Most banana producers in Africa, Latin America and Asia are small-scale farmers who grow bananas either for home consumption or local markets. Because bananas and plantains produce fruit year-round, they provide an extremely valuable food source during the hunger season (when the food from one annual/semi-annual harvest has been consumed, and the next is still to come). Bananas and plantains are therefore critical to global food security. However, the export trade of banana depends mainly on commercial plantations in Latin America, East Asia and Africa. These plantations are owned by multinational corporations.

1. Introduction

Kiwi fruit (KF) is very much acceptable for preservation by freeze-drying (FD) technique, since it has very much health benefits such as low calorific value, low glycemic index (GI), more vitamins (particularly vitamin C), maximum load of potassium, presence of variety of pigments, few important enzymes, low allergic response (AR) and finally it is rich in natural antioxidants, polyphenols. It is translucent, green pulp and many black seeds arranged nicely with covered by hairy and brown skin. The KF seeds are small sizes and black colored surround inner circularly through the whole pulp. It gives a nice crunch during consumption and provides a number of essential nutrients. Therefore, it will be remembered that seeds cannot be discarded during processing of KF unlike other fruit (jamun etc. ) seeds.

1. Introduction

The culinary banana (Musa ABB) of Assam and North East India (locally known as kachkal) is an important and cheap source of vegetable in the diet of local people. It is considered as one of the potential sources of carbohydrates, starch, polyphenols, micronutrients and functionally important bioactive compounds (Khawas et al., 2016). Native starches have limited use in food application as it has many weakness such as narrow peak viscosity range, poor process tolerance, low shear stress resistance, hydrophilicity, thermal decomposition, high retro gradation, and synersis and cooked starches will formed a weak, cohesive and rubbery paste. These facts motivated the employment of modified starches as important functional ingredients in processed foods in recent years because of their improved functional properties over unmodified starches (Fleche et al., 1985).

To overcome these problems physical. Chemical and enzymatic modification of Starch is done. Chemical modification of starch generally involves esterification, cross linking, etherification or oxidation of the available hydroxyl groups on the β-D-glucopyranosyl units that make up the starch polymer.

1. Introduction

The Refractance Window drying system uses circulating hot water, usually at 90°C and at atmospheric pressure, so that it can carry the thermal energy to the material to be dehydrated. Thermal energy is transferred to the wet product from circulating hot water through a plastic interface which is transparent to the infrared radiation. The actual product temperature is kept below 70°C. The heated water is recycled and reused, which helps in improving the thermal efficiency of the system. The use of hot water as the heat transfer medium and at temperatures just below boiling is a design feature that is unique to this drying method. In RW drying, there are three modes of heat transfer, namely conduction, convection, and radiation. The process water is heated by steam within an insulated tank and then circulated in shallow troughs to transfer thermal energy to the plastic conveyor. As the plastic conveyor is very thin, it reaches the temperature of hot water flowing beneath it almost immediately. By conduction and radiation, the thermal energy from the hot water is transmitted through the plastic conveyor. The use of process water at temperatures just below boiling and a thin plastic conveyor with infrared transmission in the wavelength range that matches the absorption spectrum for water all work together to facilitate rapid drying.

1. Introduction

Purple colour passion fruit (Passifora edulis Sims) is a tropical fruit and is well known for its nutritional content and medicinal properties (Patel, 2009). Various type of vitamin E such as α-tocopherol (5,7,8 trimethyl), β-tocopherol (5,8 dimethyl),g-tocopherol (7, 8-dimethyl),d-tocopherol (8-methyl) and α-tocotrienol, b-tocotrienol,g–tocotrierol and d- tocotrienol were quantified in passion fruit as antioxidant molecules with various health benefits (Ramaiya et al., 2013).

Foam mat drying convert thin pulp into stable foam by whipping. Eventually, the whipping process increases surface area, and speed up the drying rates which yield dried foam mat powder of acceptable quality in reduced time span (Kudra and Ratti, 2006). Rheology plays a vital role in food manufacture and marketing nowadays viz., design of handling systems, quality control and evaluation of sensory stimuli of viscosity (Barnes, 2001). It also concerns with how all food materials respond to applied forces and deformations. Basic concepts of stress (force per area) and strain (deformation per length) are keys to all rheological evaluations. Stress(r) is always a measurement of force per unit of surface area and is expressed in units of Pascals (Pa). The direction of the force with respect to the impacted surface area determines the type of stress. Normal stress occurs when the force is directly perpendicular to a surface and can be achieved during tension or compression. Shear stress occurs when the forces act in parallel to a surface. Various food shows different rheological behavior and categorized into solid and liquids stages. It basically means that food varies their characteristic in viscous and elastic behaviors commonly known as viscoelasticity of food, caused by entanglement of long chain molecules with other molecules (Abang, 2010). The dough rheology of various flour has been investigated by various research. Although, there has not been any published literature about dough rheology with incorporated passion fruit powder. To the best of our knowledge, there are no published reports regarding the shear stress properties of passion fruit powder incorporated rice dough.

1. Introduction

Underutilized fruits and vegetables are commercially neglected but recognized as rich sources of nutrients and non-nutrient bioactive compounds (Ali et al., 2008). These crops are very popular among local communities in many parts of the world and well accepted in their traditional diets and therapeutic medicines (Animesh et al., 2010). Nowadays, these are gaining significance in research and development programs of many organizations. Meghalaya is endowed with rich and unique diversity of indigenous wild edible fruit species of which most of them are less known and underutilized (Haque et al., 2009). There are rich in functional bioactive components such as vitamins and minerals are the much talked dietary nutrient for women and children health. It is being supplied to body through tablets, vegetables, fruits and other food items (Islam et al., 2012).

1. Introduction

Ohmic heating is an emerging method of thermal processing which have the feature of HTST treatment (Halden et al., 1990) with lower energy inputs (Choi et al., 2011; Sastry et al., 2011). During ohmic heating (Fig. 1) the alternating current is passed through the food material, where food acts as a resistor to the flow of electric current and leads to the instant volumetric heat generation by following the Joules first law of heating (Pereira & Vicente 2010; Lima et al., 1999 and 2001; Wang, 2014). Ohmic heat treatment of food material has been found to reduce microbial load of the food material simultaneously with the inactivation of the inherent enzymes (Demirdoven & Baysal 2014; Yildiz & Baysal 2006; Jakob et al., 2010). Despite the problems of electrochemical degradation associated with it, ohmic heating has been successfully studied for its use in preheating, blanching, pasteurization and extraction (Leizerson, & Shimoni, 2005; Lima & Sastry, 1999; Lakkakula et al., 2004). A majority of studies that have explored the effect of ohmic treatment have focused on a number of commercial products from pulp (strawberry), or puree (pea) to juice (grape), etc. (Castro et al, 2004; Icier et al, 2008; Icier et al., 2006). However, the present chapter is confined to put some light on the studies conducted on ohmic heating of various liquid food material and its effects on various parameters of the food material.

1. Introduction

Organophosphate (OP) and organocarbamate (OC) pesticides are highly used in modern agriculture due to their low persistence and high insecticidal activity. Although they are relatively less persistent than the organochlorines, they have greater acute toxicity with tolerance level ranging from 1 to 8 μg mL-1 (Mulchandani et al., 2001). The high toxicity of OP and OC neurotoxins and their large use in modern agriculture practices has increased public concern, health risk and the consequent contamination of water and food sources (Buonasera et al., 2010). Development of fast and cost effective analytical tools for onsite monitoring of OP and OC contaminations in food, water and in the environment is highly necessary. An approach toward that has resulted the evolution of acetylcholinesterase (AChE) based biosensors for OP and OC pesticides. Ample literature is available on AChE based biosensors (Zhou et al., 2013). But some intrinsic disadvantages remain that limits its utility and field deployment. The most influencing ones are their inability to sustain in organic solvents and the limited class selectivity that demands alternate bioreceptor for pesticide detection. Given the diversity in mode of action of different classes of pesticide, it is quite challenging to come up with different sensor molecules for each class of pesticides. As a continuous effort towards that goal, attempts have been made to use the Glutathione S –transferses (GSTs; EC 2.5.1. 18) for the purpose. GSTs are a multigenic family of cytosolic proteins with multifunctional biological roles, widely distributed throughout the body and found in the liver, kidney, brain, pancreas, testis, heart, lung, small intestine, skeletal muscles, prostate and spleen (Jancova et al., 2010). The important biological functions those are making GSTs the focus of current research includes its catalytic role in detoxification reaction (Lumjuan et al., 2011) over expressions during phase II metabolism as well as drug resistance associated with anticancer therapies of human and the resistance acquired by certain insects while getting exposure to pesticides (Borah et al., 2016).

1. Introduction

Starch is present in the endosperm of cereal grains which provides the necessary energy during the process of germination and seedling establishment and rice starch is reported to supply 22% of global energy intake in humans (Sun et al, 2014). Starch is a semi-crystalline polymer composed mainly of linear and highly branched polymer viz. amylose and amylopectin respectively. Each polymer is composed of several D-glucose molecules and the difference lies only in the linkages between them. Amylose is a linear chain which is interlinked by α- (1→4) linkages and few branched chains (Kizil et al, 2002). Amylopectin subunits are linked by both-(1→4) and-(1→ 6), with about 95% of the glyosidic bonds being-(1→ 4) linkages and roughly 5% being-(1→ 6). The highly branched nature of amylopectin is attributed to the-(1→ 6) linkage.

1. Introduction

Sundarbans is claimed to be one of the wonders of the world for its natural resources of halophytic mangrove forest (some 34 species of true mangroves are present), biodiversity and ecosystem that form an extraordinary environment of the globe. Available brackish water environment of Sundarbans provides favourable substratum for algal communities (Naskar and Naskar, 2010). Enteromorpha intestinalis specifically is one of the algal species that is very abundant in the Sundarban region. The production of total seaweeds in India in 2000 was approximately 600,000 tons (wet weight). India produces 110-132 tons of dry agar annually utilizing about 880-1100 tons of dry agarophytes. The seaweed industry in India is mainly a cottage industry and is based only on the natural stock of agar-yielding red seaweeds, such as Gelidiella acerosa and Gracilaria edulis, and algin yielding brown seaweeds species such as Sargassum and Tubineria (Kaladharan and Kaliaperumal, 1999).

Investigational studies indicate that marine algae contain significant amount of nutraceuticals, vitamins, proteins, carbohydrates, fiber and antioxidants. Composition indicates that there is a tremendous scope for food and pharmaceutical applications. These may be used for food fortification but after rigorous studies. Formulation, standarizaiton and characterization should be performed before human use. Studies for exploitation of the bioactive components of the species may open up new avenues. Hence there seems to be a full scope for the realization of outcomes of the research. Further the utilization of the developed processes at higher scales may reap in financial benefits and may prove beneficial to the local people, who are supplier of the raw materials. The present study is an attempt to utilize this India variety of macro-algae for fortification of bakery food products.

1. Introduction

Citrus is a common term and genus (Citrus) of flowering plants in the Rue family, Rutaceae. Citrus fruits are non-climacteric and respiration slowly declines and the production and release of ethylene is gradual. India ranks sixth in the production of citrus fruits in the world. Citrus wastes typically are about 45- 50% of the weight of citrus original and the percentage of waste to 30-50% for vegetables and fruits in general. Natural colour plays a significant role in determining the degree of consumer acceptance of the product. In addition, carotenoids (vitamin A precursor) have high nutritional values which are important for human nutrition.Francis and Isaksen (1988) stated that carotenoids play a very important role for extraction as for protection of health against cancer, cardiovascular and eye disease and as anti-oxidant. Carotenoids play important roles in human nutrition through their provitamin A activity, but also by acting as antioxidants, for prevention of age-related macular degeneration or skin protection against UV radiation. The antioxidant capacity of carotenoids was proved for pure compounds as well as for plant extracts and food. The main objective of this research work is extraction, determination and identification of natural colorants from different citrus wastes (citrus peel). Also to study the effects of pH and oxygen on the stability of extracted pigments and determination of the specific carriers for the extracted pigments using solid matrices (starch, dextrin, arabic gum and flour).

    
1.    Introduction
    
2.    Containers
    2.1     Materials used for forming containers
    2.2    Types of cans
    2.3    Labeling and coding
    2.4    Can seam
    
3.    Microbilogical Aspects
    3.1     Organisms associated with non acid foods
    3.2     Heat resistance of bacteria
    3.3     Logarithmic order of destruction
    3.4     Thermal death time curve
    3.5     Determination of TDT and survivor number
    3.6     F-value
    3.7    12 D concept
    
4.    Heat Penetration Aspects
    4.1    Factors that influence heat penetration
    4.2    Measurement of cold spot temperature
    
5.    Thermal Process Calculation
    5.1    General method
    5.2    Formula method
    
6    Inoculated Pack Studies

7.    Effect of Thermal Processing on Food Quality
    7.1    Cook value
    
8.    Steps of Canning Fish
        
    8.1    Handling raw material
    8.2    Dressing and size cutting
    8.3    Salt treatment
    8.4    Precooking
    8.5    Smoking
    8.6    Packing/ Filling
    8.7    Exhausting and seaming
    8.8     Retorting and cooling
    8.9    Inspection and storage

References

1.       Introduction

2.    Lipid Storage in Fish
    
3.      Factors Influencing Nature of Lipids in Fish
    
4.    Composition of Fish Oils
    4.1    Nature and composition of fatty acids
    4.2     Triacyl glycerols
    4.3     Phospholipids
    4.4     Diacyl glycerol ethers
    4.5     Wax esters
    4.6     Hydrocarbons
    4.7     Sterols
    
5.    Autoxidation of Fish Lipids
        
    5.1    Mechanism of autoxidation
        
    5.2     Factors influencing lipid autoxidation
        
    5.3     Control and prevention of autoxidation
    
6.    Lipid Autolysis
    
7.    Rancidity Problem in Fish
    7.1     Indices of oxidative rancidity
    
References

1.    Introduction
    
2.    Structure of Protein
    2.1     Primary structure
    2.2     Secondary structure
    2.3     Turns and Bends in the Polypeptide Backbone
    2.4     Tertiary structure
    2.5     Quaternary structure
    
3.    Protein Denaturation
    
4.    Conditions Affecting Protein Structure
    
5.    Fish Proteins
    5.1    Sarcoplasmic proteins
    5.2    Myofbrillar protein
    5.3    Stroma proteins
    5.4    Functional properties of fish proteins
    
References
    
Further reading

1. Introduction

Okara is a by-product generated during processing soybean into soymilk or tofu. Okara is rich in fibre and protein. It contains most of the carbohydrates, some of the protein and a small portion of the oil from soybeans. Okara contains approximately 50% fibre, 27% protein, and 10% fat on dry basis (Li et al., 2012). About 1. 2 kg of fresh okara is produced from every kilogram of soybean processed for soymilk (Vishwanathan et al., 2011). Fresh okara from soymilk production has about 80% moisture. The protein present in okara has good nutritional quality and superior protein efficiency ratio. Other soy components that are also likely present in okara include isoflavones (genistein and daidzein), lignans, phytosterols, coumestans, saponins, and phytates (Li et al., 2012). The most common method of utilization of okara is in the form of animal feed. Tofu or soymilk processing plants primarily dump okara as landfill or resort to burning. Okara can be utilized as a fertilizer as it contains various nutrients required for growth of plants. It can be used as a fermentation substrate for production of ethanol. Okara can also be used in pet foods as it contains high levels of extenders and protein. Apart from these, okara can be used in a variety of food products. It can be used in various food products. Utilization of okara is still in the initial stage. It can be used as a replacement of wheat flour in baked products. It can also be used in various soups, salads or vegetable preparations.

Resistant starch refers to the portion of starch and starch products that resist digestion as they pass through the gastrointestinal tract. Resistant starch is the fraction of starch which is not hydrolysed to D-glucose in the small intestine within 120 min of being consumed, but which is fermented in the colon. It can be used as a functional ingredient in various food formulations (Fuentes-Zaragoza et al., 2010). RS has desirable physicochemical properties (Fausto et al., 1997) such as swelling, viscosity increase, gel formation and water-binding capacity, making it useful in a variety of foods. It helps in improving the appearance, texture, and mouthfeel of the final product compared to conventional fibres. Resistant starch can act as a prebiotic for gut microflora (Sajilata et al., 2006). It has hypocholesterolemic effects, is hypoglycaemic and prevents gall stone formation.

1.    Introduction
    
2.    The Scenario in India
    
3.    The Concept of Hygiene in Indian Food Industry
    
4.    Food Safety- The Reality
    4.1      Food import inspection and certification
    4.2     Laboratories for export certification
    4.3      Food export inspection & certification
    
5.    What is HACCP? & What is in Practice?
    
6.    Where We Stand?

7.    Success of Application of Food Safety Management System
    7.1.    Pre-requisites for HACCP
    
8.    Logical Steps of HACCP
    8.1      Assemble HACCP team
    8.2     Describe product
    8.3     Identify intended use
    8.4     Construct flow diagram
    8.5     On site confirmation of flow diagram
    8.6     Principles of HACCP
    
9.    Conclusion
    
References
    
Further References

Index
    
About the Editors

Introduction

Fresh fruits and vegetables are known for their nutritional and relishing nature. But, their fast perishability and season wise availability make them unavailable for a longer time. To enjoy and get benefited from their unique taste and nutritional value they are further preserved or converted into some value-added products such as jam, jelly, candies, juices, minimally processed fresh-cut fruits and vegetables, pickles etc. There are techniques which are developed to preserve them while in fresh and also when they are made into value-added products. Some require only one technique and other requires more than one in combination so that the product can be preserved for a longer period and available to maximum population even after their period of production/availability is completed.

1.    Introduction
    
2.    Bacteria of Public Health Significance in Fish Handling
    
3.    Sanitary and Hygienic Precautions to be Followed in Fish Handling
    3.1    Requirements for the fishing vessels
    
4.    Requirements for the Landing Sites/Auction Centres
    
5.    Requirements for the Processing Centres
    5.1     Use only potable water or clean sea water for washing fish
    5.2     Never put fish on sand or any unclean surface
    5.3     Lighting and ventilation
    5.4     Water supply
    5.5     Ice
    5.6     Utensils for fish handling
    5.7     Washing of utensils and fish contact surfaces
    5.8     Workers’ hygiene and health
    5.9     Rodent control measures
    5.10     Fly control measures
    5.11     Waste disposal
    5.12     Storage of toxic substances
    5.13     Toilet facilities
    
Acknowledgement
    
References

1. Introduction

With increase in consumer awareness and lifestyle the interest for health promoting natural food ingredients has expanded in recent years. However, globally it has become a great challenge to the manufacturers to ensure that such compounds should remain in their active form during processing and storage with an emphasis to its bioavailability profile. Oxidative stress is the major contributor to the pathogenesis of a number of chronic and degenerative diseases including atherosclerosis, Alzheimer’s and Parkinson’s disease, diabetes, DNA damage, carcinogenesis, cardiovascular and neuro degenerative diseases, allergies, premature ageing etc. (Gupta et al. , 2014; Svetli et al. , 2010). Endogenous antioxidant defense mechanisms are not always sufficient to fully scavenge the free radicals formed in the body during various processes. Therefore, dietary components having antioxidant properties, such as tea flavonoids, are very much necessary to supplement the activity of endogenous antioxidants. Tea is one of the most concentrated sources of flavonoids and phenolic acids which show antioxidant activity by sequestering metal ions and by scavenging reactive oxygen and nitrogen species (Frei & Higdon, 2003).

11.1    Maturity Indices
    
11.2    Harvesting and Field Handling
    
11.3    Packhouse Operations
    
11.4    Packaging
    
11.5    Precooling

Bananas and plantains constitute the fourth most important global food commodity (after rice, wheat and maize). They are cultivated in over 120 countries in the tropical and subtropical regions of the world in an area of  approximately 100 million hectares, where they constitute a major staple food crop for millions of people, as well as providing a valued source of income through local and international trade.
 
Banana is one of the oldest fruit crops of India, finding its reference even in epics like Ramayana. India is  believed to be one of centres of  origin, besides southeast Asian countries like Burma, Thailand, Malaysia and Indonesia. It is a crop having multifarious uses as every part of the plant is utilized and hence aptly  called as ‘Kalpatharu’ the plant of virtues. It is important internationally from the point of view of  trade as well as livelihood security.

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1     Introduction

2     Bacterial Flora on Fish

3     Products of Bacterial Activity

4      Bacterial Flora of Fish Caught from Different Waters

5      Fish Spoilage and Bacterial Flora

6      Bacterial Contaminations
    
7      Bacterial Contamination of Harvested Fish
    
8      Growth of Spoilage Bacteria
    
9      Scombroid Poisoning
    
10      Microorganisms on Iced Fish
    10.1     Crustaceans
    10.2     Molluscs
    
References

By definition, minimal processing would encompass any procedure, short of traditional complete preservation procedures (heat sterilization etc.) that adds value to the fruit or vegetables (Floros, 1993). Other terms used to refer minimally processed products are lightly processed, partially processed, fresh processed, fresh cut and prepared. Minimally processed fruits and vegetables are products those have the attributes of ‘fresh-like’ quality. A number of minimally processed products of fruits and vegetables are now being produced like peeled and sliced potatoes, shredded lettuce and cabbage, washed and trimmed spinach, chilled peach, mango, banana, melon and other fruit slices, vegetable snacks such as carrot and celery stick  and cauliflower and broccoli florets, packaged mixed salads, cleaned and diced onion, peeled and cored pineapple, fresh sauces, peeled citrus fruits and microwaveable fresh vegetable trays. Minimal processing of fruits and vegetables has two purposes. First, it is important to keep the product fresh but convenient without losing its nutritional quality. Second, the product should have a shelf life sufficient enough to facilitate distribution within the region of consumption. The microbiological, sensory and nutritional shelf life of minimally processed fruits and vegetables should be at least 4-7 days but preferably even longer (Ahvenainen, 2000).