eChapters

1.    The function of myoglobin is to store in living animal’s muscle.

(a) Oxygen

(b) Nitrogen

(c) CO₂

(d) Oxygen + carbondioxide

2.    Myoglobin is in color when not carrying an oxygen molecule.

(a) Red

(b) Blue

(c) Purple

(d) White

1.    Food Additives are

(a) Nutritive substances added to enhance flavour, texture or storage properties

(b) Non-Nutritive substances added to enhance flavour, texture or storage properties

(c) Both (a) and (b)

(d) Chemicals, added for preservation

2.    Which is an acceptable application of a food additive?

(a) As a fat replacer

(b) As an antioxidant

(c) As a food colorant

(d) All of these

1.     A fruit juice at 20°C with 10% total solids is concentrated in a single effect evaporator that is operated at a vacuum to allow the product moisture to evaporate at 80°C and steam with 82% quality is supplied at 169.06kPa. The desired concentration of the final product is 45% total solids and the concentrated product exits the evaporator at a rate of 300kg/hr. Calculate the steam requirement for the process when condensate is released at 90°C. The specific heat of liquid feed is 4.05 kJ/kg°C and of concentrated product is 3.175 kJ/kg°C.

(a) 3.35 kg/s

(b) 3.25 kg/s

(c) 4.25kg/s

(d) 2.35kg/s

2.     A double effect evaporator is being used to concentrate fruit juice at 35000kg/hr. The juice has 10% total solids at 80°C and requires to be concentrated to 50% total solids. The saturated steam at 1.608 atm is available. What is mass flow rate of water vapors?

(a) 7.505 kg/s

(b) 8.505 kg/s

(c) 5.707kg/s

(d) 6.808.kg/s

Milk is nutritious and essential food for human beings and also serve as good medium for microbial growth and contamination. Milk is a single, most nearly complete, natural food. Primarily it is meant for nourishing the newborns but man has exploited it for human consumption since long. Today milk has become indispensable integral component of our diet. About half the milk produced is consumed as fresh milk, the rest going into a variety of products including evaporated and condensed milk, dried milk powder, butter, cheese, malted milk, ice cream, yoghurt, lactose and casein. Milk is very important from a nutritional standpoint since it contained all the essential food constituents (carbohydrate-lactose, protein-casein, fat-butter, minerals- calcium, potassium and vitamins- A, B, C, D, E, and K) required in human diet in about the proper proportions. India is the second largest producer of milk in the world. India has exhibited unprecedented rate of growth in dairy development in last 30 years mainly due to sustained efforts of dairy technologists in Operation flood Programme introduced by the National Dairy Development Board. Dairy microbiology deals with aspects like shelf life and spoilage microbes, public health significance and food borne pathogens, and production of fermented dairy products.

SINGLE CELL PROTEIN (SCP) AND PROTEIN DEFICIENCY

Protein is an essential component of diet. The greatest single problem in the world today is global food protein shortage. Having adequate quantity of food is only one side of the picture, but the most important aspect is the supply of balanced and nutritious food. All efforts are being made to increase the food production through modern methods of farming. But very little attention is being paid towards protein requirements and production. Approximately half of world population suffers from the protein deficiency disease called ‘Kwashiorkor’ and children with poor protein are victims of this disease.

Usually, cereals have low protein values while protein rich pulses are not available in desired quantities due to poor yields and high costs. The good quality protein available in fish, meat, poultry, and eggs is not available due to poor economic condition as well as varied dietary habits. With the current system of production, agriculture cannot be relied upon to feed an ever increasing world population. Hence there is an urgent need to find other protein sources. The best potential is seen in microbial protein or single cell protein (SCP), a new source of protein independent of agriculture.

DEFINITION: The dried cells of microorganisms such as bacteria, fungi, yeasts, algae that are grown in large scale culture systems as proteins for human or animal consumption are collectively known as "single cell proteins".

Ex.No.1. MICROBIAL SPOILAGE OF FRUITS

Fruits are living structures that continue to perform metabolic reactions and sustain physiological processes for a considerable length of time after harvest. The post-harvest infection of fruits by microorganisms may cause serious losses of fruits both in terms of quantity and quality. Initial infection which may be the direct result of mechanical or insect damage is followed by invasion of fruit tissues by secondary infection by common saprophytic organisms. . Many bacteria and fungi, for instance, are involved in decay after harvest. Typical fungi include Alternaria, Botrytis, Colletotrichum, Fusarium, Monilia, Penicillium, and Rhizopus. These fungi are generally weak pathogens, in that they usually infest only weak or damaged fruit. Molds are the most predominant spoilage organisms in fruits. Fungal rots in fruits like apple show brown or cream coloured areas.

Bacterial soft rot caused by Erwinia carotovora is wide spread in fruits that are not very acid. Fruits like straw berries, melons are in direct contact with moist soil and become infected from that source.

One of the major discoveries that gave birth to the field of microbiology was the development of instruments that could magnify, so that objects too small to be seen with the naked eye could be visualized. Robert Hooke in 1665, using an instrument with two sets of lenses (a crude compound microscope), was the first person to describe cells as life’s smallest structural units. In the early 1670s Anton van Leeuwenhoek used a simple magnifying lens to observe microbes he called ‘animalcules’ in rainwater, and was possibly the first person to observe microorganisms. The development of electron microscopes in the 1930s enabled magnifications of a further hundred times greater to be achieved.

A microscope can be defined as an optical instrument consisting of a lens or a combination of lenses for getting magnified images of minute objects. A simple microscope is essentially an ordinary magnifying lens held on an adjustable stand. It can give magnification up to 20 times the size of the object.

Improvements in microscopes enabled scientists to study the ‘invisible’ organisms – that is, those too small to be seen with the naked eye. They were able to show that certain of these microscopic creatures are responsible for the infectious diseases of higher organisms. Most of them are harmless, some are essential for life and some are used in the manufacture of products that are of benefit to humans.

13.1 Introduction

Hospitality industry is the second largest industry in the world. It is well diversified and can be chosen as per the interest. Hospitality management involves planning, organizing, directing and controlling human and other resources within the different segments of hospitality industry i.e. lodging, restaurant, travel and tourism, institutional management, recreational management, meeting and convention planning industries. Although, these all are separate but related segments of the hospitality industry and are interrelated to provide good and efficient services to the guests and users. Hospitality industry provides services which are need oriented and differ in various parts of the world as per regions and the traditional styles.

The first building created specifically for hotel was ‘City Hotel’ with 73 rooms at 115 Broadway, New York in 1794. Pallonjee Pestonjee established the very first western-style hotel in India, “The Bristol Hotel” in Mumbai in 1840. According to the report of the department of Tourism, Government of India, at the end of the year 2004, there were 167 Five star hotels with approx. 28,900 rooms, whereas 126 Four star hotels, with 8,831 rooms [2]. To expedite the ongoing process of classification/re-classification of functioning hotels in one to three star categories, five Regional Committees have also been set up in Delhi, Mumbai, Kolkata, Guwahati and Chennai to conduct inspection [3].

Abstract

Consumer now-a-days relies on manufacturing and processing standards, particularly to know what ingredients are present, due to dietary, nutritional requirements, or medical conditions (e.g., diabetes orallergies). Modified PCR and combination of PCR with other analytical tools have been successfully used for analysis of various parameters related to functional foods such as detection and quantification of beneficial as well as food borne pathogenic microorganisms, food allergens, raw material source, bioactive compounds, genetically modified foods. Multiplex PCR method has been found to be an efficient tool for simple, rapid, and reliable identification of Lactobacillus and Bifidobacterium in probiotic products. Food allergens like gluten, peanut, hazelnut etc. could be easily detected in foods using PCR, even if present in small quantities. BOX-PCR and PCR-DGGE analysis have been used for identification of bacterial diversity of a naturally fermented functional food (Enzyme). HPLC combined with real time -PCR were successfully used to quantify and analyse compounds of secondary metabolites like phenylpropanoid amides, which represent an important class of nutraceutical having strong antioxidant and chemotherapeutic effects in various transgenic tomato tissues. Detection of active compounds in natural plant products were successfully achieved using PCR techniques. In general PCR have gained more importance as it has high sensitivity, improved precision, wide dynamic range for quantification, genotype based and is quick method of detection and quality control of foods than traditional culture based methods.

Abstract

Prebiotics are the non-digestible food ingredients that beneficially affect the host by selectively stimulating the growth and/or activity of one or limited number of bacteria in the colon. These are heat resistant components which remain intact during the baking process; this allows prebiotics to be incorporated into every day food choices. Consumption of non-digestible ingredients allows the growth ofbio cultures by reaching the intestine unaffected by the digestion process resulting in improvement of digestive health. Prebiotics reach the intestine in an unaltered form and shows the prebiotic effect when there is an increase in the activity of healthy bacteria in the human intestine. The prebiotics stimulate the growth of healthy bacteria such as bifidobacteria and lactobacilli in the gut and increase resistance to invading pathogens. Functional foods increase consumer choice by adding prebiotics to every day food items such as cereals, biscuits, breads, table spreads, drinks, and yoghurts. By continuing to eat and drink common foods, but choosing functional alternatives (such as bread containing prebiotics) dietary requirements can be met, without significant changes to foodpreferences. Some common example of cereal based products containing prebiotics are oat-based prebiotic drink, Breakstone's and Knudsen live active cottage cheese, prebiotic yogurt- Attune and Muller vitality, multi-fruit drink enrich and flavoured water enrich, prebiotic flavoured water, prebiotic capsules, dried fruit bars, prebiotic powder- Biocare fructo-oligosaccharides, Newtree purplaisir chocolate spread. The claims are constipation relief, suppression of diarrhea and reduction of the risks of osteoporosis, atherosclerotic cardiovascular disease associated with dyslipidemia and insulin resistance, obesity and possibly Type-2 diabetes. At present, claims about reduction of disease risk are only tentative and further research is needed.

Abstract

The use of biosensors is growing in the food industry as a means to ensure food safety and quality because of its versatility in determining biological compounds. It is defined as analytical technique used for detection of analyte that combines a biological component with a physico-chemical detector. The most important contribution of biosensors in the food sectors is to control production processes and ensure food quality and safety by reliable, fast and cost effective procedures. Biosensors have been useful for the evaluation of food composition, particularly in functional food products fortified with phytochemicals, vitamins and minerals.. Biosensors are replacing conventional analytical tools since they offer advantages in size, cost, specificity, rapid response, precision and sensitivity. Future progress in the biosensor technology involves the development of nutraceutical release technology within packaging material where it can be used to trigger the controllable release of bioactive components and targeted delivery of protective agents into the food product. The growing consumer demands for safe and quality food has led the food industries to search for quick and reliable methods for which the applications of the biosensor technique in the field of food processing and quality control are found to be promising.

Under natural habitats microorganisms usually grow in mixed populations containing several species. This is really a problem for microbiologists because a single type of microorganism can not be studied adequately in a mixed culture. In laboratories these populations can be separated into pure cultures. The pure cultures contain only one type of organism and are thus suitable for studying the cultural, morphological and biochemical characters of an individual species. In the present days there are several ways of developing pure cultures in laboratories. Some of which are as follows:

Introduction

The present trend in the search for new drugs is to look at natural sources, which are safer for humans and ecofriendly. Of late there has been increased awareness about the detrimental effects of synthetic food supplements, food additives and drugs, and the search for natural alternatives in plants has intensified. In this regard, horticultural crops are particularly appealing since they are not only edible, but also have diverse nutraceutical effects. Nutraceuticals (often referred to as phytochemicals or functional foods) are natural, bioactive chemical compounds that have health promoting, disease preventing or medicinal properties (http://foodsci.rutgers.edu),such as antioxidant, anti-inflammatory, hypoglycemic, hypolipidemic, antimicrobial effects, to name just a few. Most of these properties are attributed to the secondary metabolites present in plants, various phytochemicals including flavonoids, terpenoid, lignans, sulfides, polyphenolics, carotenoids, coumarins, saponins, plant sterols, curcumins, phthalides etc. The medicinal value of our horticultural crops is not a new knowledge, it has been exploited by the traditional systems of medicines like Ayurveda, folklore medicines and ‘kitchen remedies’ since time immemorial.

A functional food is similar in appearance to, or may be, a conventional food that is consumed as part of a usual diet, and is demonstrated to have physiological benefits and/or reduce the risk of chronic disease beyond basic nutritional functions, i.e. they contain bioactive compound.

A nutraceutical is a product isolated or purified from foods that is generally sold in medicinal forms not usually associated with foods. A nutraceutical is demonstrated to have a physiological benefit or provide protection against chronic disease.

Introduction

Plants contain a variety of substances of nutraceuticals importance which are useful medicines, food additives, cosmetics and health supplements etc. However, low availability under in vivo condition, decreased plant resources, increases in labour cost and other problems in obtaining these high-value added substances from natural plants have pointed toward the use of in vitro techniques for production of the products. Because in vitro cultures are not affected as the production affected under in vivo conditios.This has led scientists and biotechnologists to consider plant cell, tissue and organ cultures as an alternative way to produce the corresponding secondary metabolites.Therefore, studies on the production of useful metabolite by in vitro techniques have been carried out on an increasing scale since the end of the 1950’s. The large scale cultivation of tobacco and various vegetable cells was examined in the late 1950’s and early 1960’s in the U.S., Canada, and Europe. At present, several firms are manufacturing a plant pigment, shikonin, and ginseng cell biomass on a commercial scale and several other products including anti-oxidant products.

Research efforts on in vitro derived extracts is well documented on each of these major product categories: flavors (onion and garlic, peppermint and spearmint, fruit flavors, chocolate aroma, seaweed flavors, vanilla, celery, coffee, spice, sweeteners, and so on); edible colors for foods and medicines (mainly betalains and anthocyanins): non-food pigments for cosmetics and textiles (shikonin, berberine, and various other products); several examples of fragrances and essential oils; and bioactive natural insecticides and phytoalexins useful in current integrated pest management programs. Of course, intensive activity has centered on production of natural drugs of chemoprotective compounds from plant cell culture. Some of the most prominent pharmaceutical products in this latter category include ajmalicine (a drug for circulatory problems) from Catharanthus roseus and taxol (a phytochemical effective in treatment of ovarian cancer) from Taxus species.

Food Safety and Standard Authority of India (FSSAI) has adopted the standards of Fruit Product Order (FPO).

Chutney

It is a product prepared by cooking the fruit pulp with added salt, sugar, spices, acetic acid and fruit to a suitable consistency so that it contains TSS not less than 50% and fruit part not less than 40% as per FSSAI specification. Sugar, salt, spices, acetic acid all act as partial preservatives. Preservatives may also be added in chutney for increasing its storability. Generally no artificial colour and flavor are required to be added.

Sauce

Sauce is a product similar to ketchup, prepared from pulps of tomato or other fruit/vegetable, having TSS not less than 15% and cooked to a suitable consistency with added sugar, salt, spices and vinegar. Sugar, salt, spices, acetic acid all act as partial preservatives. According to FSSAI specification fruit sauce should have minimum of 15% TSS and 1.2% acidity. Preservatives and colours may also be added for increasing of appearance and storability.

Abstract

Chitin has been ranked at second position after cellulose as the most abundant natural biopolymer. Chitin has similar chemical structure to that of cellulose with 2-acetamido-2-deoxy-b-d-glucose (NAG) monomers attached via ß (1–>4) linkages. Chitosan is the deacetylated (to varying degrees) form of chitin, which, unlike chitin, is soluble in acidic solutions. Therefore, Chitosan, a copolymer of glucosamine and N-acetyl glucosamine, is amongst the most copious biopolymers on earth and finds wide range of biomedical and industrial applications. It has been approved in 1983 by USDA as a feed additive. Chitin basically is obtained from prawn/crab shells and chemical treatment of chitin produces chitosan. Since supplies of seafood waste are seasonable and variable, so fungi can be used as alternative source for chitosan. The unique physicochemical properties of chitosan provide great potential of its utilization in food industry especially dairy industry such as production of dairy products, dairy waste water treatment, extension of shelf life of dairy products etc. In recent years, exotic synthetic compounds are losing their appeal, thus application of chitinous products in dairy as well as processing aids has received considerable attention. The modified chitosan with greater functional properties has increased application in different dairy foods. This chapter focuses on the fundamental uses of chitosan and their derivatives in a variety of dairy industry applications.

Abstract

Consumers increased response to new products with high sensory, organoleptic and nutritional potentials has impelled a search for new substitutes to processing methods. For several years, thermal processing was the main technology for producing safe products with long shelf lives, although in most cases losses of fresh flavors, vitamins, and some physicochemical characteristics were the price of safety and long-term stability. Pulsed electric field (PEF) processing as a non- thermal technique has been proven to inactivate microorganisms with minimal losses of flavor and food quality, possibly making it the answer to present-day consumer demands. In addition, the low processing temperatures used in this non- thermal technology allow the process to be nutrient preserving, energy efficient, which translates into lower costs and fewer environmental impacts. In this chapter, the the configuration of various PEF equipment, their electric configuration and recent application of this technique in processing of foods have been discussed in detail.

4.0. Introduction

Quality is a measure of the degree of excellence or degree of acceptability by the consumer. By quality, one can differentiate the individual unit of a product from the other units and can determined the degree of acceptability of the individual unit by the consumer. The quality may also be defined in term of end use and may vary depending upon consumer’s perception and need. According to USDA Marketing Workshop Report (1951) “quality is the combination of attributes or characteristics of a product that have significance in determining the degree of acceptability of the product to the user”. For industry, quality is a measure of purity, strength, flavour, colour, size, maturity, workmanship and conditions or any other distinctive attributes of the product.

According to Code of Federal Regulations “Quality is the inherent properties of any processed product which determine the relative degree of excellence of such product and includes the effect of preparation and processing and may or may not include the effects of packaging or added ingredients/ additives”.

Introduction

Food safety and quality assumes paramount significance in any food industry. Globalization has driven both the food and agricultural firms to adopt systems that functions in a way to interlink food standards and international trade so as to achieve superior food quality and safety. Food industries follow several regional and international food safety procedures to procure certification from the government and other agencies in order to survive in both domestic and international markets (Ryan, 2014). The essential components in the food safety include handling, preparation and storing of the food products to ensure the food quality and to avoid food-borne diseases. The unwanted substances in a food product included by an accident is known as contaminants and the unwanted substance added to the food product to reduce the cost or to improve the other properties are known as adulterants. Contaminants and adulterants may lead to pathogens and toxins that pose serious concerns over the health of the consumer (Jha, 2016). The adulterants and contaminants are classified as physical adulterants and contaminants, chemical adulterants and residues, microbiological and pathogenic contaminants and toxins.

Hazards in food can be categorized into physical, chemical and biological.

Physical Hazards: Physical hazards are foreign organic or inorganic objects or extraneous materials in the food products. Hard and sharp physical hazards are of particular concern. Examples of physical hazards are broken glass, plastics, metal pieces, wood pieces, stones etc.

Introduction

Thermal processing is an important treatment for food preservation is, especially in the manufacture of shelf-stable foods with specific nutritional properties. It is also indispensable for determining the sensory properties, particularly, colour, flavour, and texture of fried, baked, and roasted products. As a result of heat treatment, chemical changes induced, and a plethora of new molecules are formed in foods, some of which have been claimed to be health-promoting antioxidants and anti-mutagens. However, reports suggest that thermal processing leads to the formation of certain toxic compounds, so-called process-induced contaminants in foods. The process-induced toxicants are certain compounds which are formed in food as a result of food processing, exert adverse toxicological effects, and cause potential health risks to humans. Acrylamide, furan, chloropropanols, heterocyclic aromatic amines, polycyclic aromatic hydrocarbons, and N-nitrosamines are some well-known examples of thermal process contaminants.

Advancements on sugar processing

India has popped out as one of the largest sugar processing country throughout the world. Through the collaboration of research and development carried out in the field of sugar processing, this industry has witnessed the vast changes in term of technology. Important considerations such as productivity improvement and cost reduction were the main objectives in the field of sugar processing. Sulphur dioxide was earlier used but afterwards lime treatment in clarified juice helped in the processing of white sugar from sugar cane. Since then the continuous progress and improvement has been made and advanced techniques are introduced for manufacturing of sugar with modern tools.

Ramjeawon (2004) reported that farmers and agriculture workers grow sugar cane and beet root for sugar production,providing about 20 kg per capita and that is equivalent to almost 13 percent energy requirement. Fechter et al. (2001) reported that production of the white sugar was focused more on juices rather than molasses which were taken as the raw material. Various processes such as ultra-filtration, de-mineralization and de-colorization were used for the production of white sugar. The traditional refining process wascheaper, and effective in terms of purification and juice purification was the method used for the processing of white sugar directly from the sugar cane. Crystallization was one of the process which is used for increasing the recovery of sucrose and it reduces the molasses production. Chromatography was used in the sugar industry for the separation of sucrose. Another method was ion exchange demineralization which was used in the sugar industry for the removal of minerals from the liquid sugar. Later adsorption has been incorporated to be used de-odorization and de-pigmentation. Membrane filtration is latest technique used in the process which was used for maintaining the quality of white sugar by removing unwanted particle from the juice. Velásquez et al.,(2018) reported that thermal processes are also used for the production of sugar from sugar cane. Non centrifugal cane sugar processing is used for this purpose and the product is obtained by evaporating the sugarcane which has the unique flavor and aroma. Later the product is used as the sweetener and has a traditional characteristics flavor and optimum nutrition.

Introduction

Biotechnology is defined as the ‘application of scientific and engineering principles to the processing of material by biological agents to provide goods and services’. The term ‘biotechnology’ is also used when a technique involving live organisms are employed to make or modify a product, improve plants or animals or develop microorganisms for specific uses. According to the definition of the Codex Alimentarius Commission (CAC 2001), modern biotechnology is defined as the application of (i) in vitro nucleic acid techniques, including recombinant deoxyribonucleic acid (DNA) and direct injection of nucleic acid into cells or organelles, or (ii) fusion of cells beyond the taxonomic family, that overcome natural physiological reproductive or recombination barriers, and that are not techniques used in traditional breeding and selection. Scientific developments of present world owe to processes and products of the field of biotechnology. Modern biotechnological advancements have played a major role in important branches of science such as agriculture, food processing, medicine and veterinary applications. Biotechnological interventions of the downstream processing applications include primary production areas namely breeding of crops and livestock, production of additives for food and feed and pharmaceuticals along with diagnostic tools. Inputs for food processing applications from biotechnology include biocatalysts such as enzymes, tracing food ingredients such as Genetically modified (GM) ingredients in end products of food and feed and food quality testing applications for food borne pathogens. Applications of modern biotechnology in form of genetically modified organisms have gained much importance in comparison to the downstream applications during food processing and food safety (Zhu, 2017). Food processing operations include transformation of harvested crop or animal produce into produce which are marketable with long shelf life and minimises waste and losses of raw produce in food chain and ensure their continuous availability in super market shelves. Food safety is an important area which assures of the food being safe for consumption. Food technological applications of modern biotechnology includes food enzymes that are important in various food processing applications in reactions involving lipids, carbohydrates and proteins, food fermentations to improve properties such as taste, flavour, texture, nutritional and shelf stability, food additives in form of bio preservatives, flavours, fragrances, genetically modified starter cultures, genetically modified crops, modern rapid diagnostic kits for food safety are discussed in detail.

Packaging : Packaging of fruits, vegetables, flowers or any other commodity is chiefly done to assemble the produce in convenient units of different sizes, shapes & types for storage, transportation, marketing and distribution. The size of units may vary depending on the requirement e.g for retail marketing smaller units are preferred and for bulk transportation and storage, large units would be more convenient.

Why do we Require Packaging?

Imagine there is no packaging material and technology available. How we are going to transport apple, mango etc. to distant markets? Definitely as loose. Then how can we weigh or count the fruits being transported or marketed? This would be very difficult. Had there been no packaging the commodity would have suffered great physical, chemical and microbiological losses. It would have been very difficult to handle, manage, transport and market the produce as loose and unpacked. Therefore, the packaging of fresh as well as processed commodities was needed to contain, unitize and protect the produce.

Nature has made such a beautiful system that a fruit does not spoil unless its outer covering is removed and till it is there on the plant. For example banana will not spoil for long time if we do not remove its peel. Similar is the case with apple, guava, mango and many other fruits and vegetables. But as soon as the outer covering is removed the damage begins and the commodity is spoilt very soon.

Preservation is extending shelf life of fresh or processed food by using various methods and prevention or reduction of spoilage. Better the preservation, lesser the spoilage, more the spoilage poorer and inefficient is the preservation.

Therefore, in order to prevent or reduce the spoilage, we have to first identify and understand the causes of spoilage. There are chiefly 3 agencies that cause spoilage in fruits and vegetables i.e. (i) microorganisms, (ii) enzymes & chemical changes and (iii) man, animals, rodents, insects, etc. For effective preservation we have to check the growth and activity of these spoilage causing agencies. So, in order to prevent spoilage and preserve a perishable commodity for long time the following principles and methods are to be followed.

India has a population of one hundred twenty four crore plus and feeding this large a population calls for a strong FPI. The industry also assumes importance in the national economy due to the immense employment generation opportunities it offers and the export revenue it earns. Food Processing Industry (FPI) in India is a sunrise sector that has gained prominence in the recent years. Easy availability of raw materials, changing lifestyles and favourable fiscal policies has given a considerable push to the industry’s growth. FPI serves as a vital link between the agriculture and manufacturing sectors of the economy. Strengthening this link is critical to reduce wastage of agricultural raw materials, improve the value of agricultural produce by increasing shelf-life as well as by fortifying the nutritive value of the food products and ensure remunerative prices to farmers as well as affordable prices to consumers. The industry has very low processing level i.e., 2.2% for fruits and vegetables, around 35% in milk, 21% in meat and 6% in poultry products, which is significantly lower by international standards. For e.g., processing of agriculture produce is around 40% in China, 30% in Thailand, 70% in Brazil, 78% in the Philippines and 80% in Malaysia. Value addition to agriculture produce in India is just 20% with wastage estimated to be valued at around US $13 billion.

India has the second largest producer of food with arable land of 159.65 million hectares and has the highest acreage under irrigation. Next to China, India ranks second largest food producer in the world and has the potential to immerge the biggest with its food and agricultural sector. India accounts for less than 1.5% of international food trade despite being one of the world’s major food producers, which indicates huge potential for both investors and exporters. Food and food products are the biggest consumption category in India

In India, people are mostly vegetarian, depending largely on cereals and pulses, as their staple foods, which provide the main source of dietary proteins and calories. The proteins from pulses are known to be inferior quality, due to the deficiency of sulphur containing amino acids as well as due to other factors like digestibility, availability of amino acids, anti-nutritional factors, etc. The anti-nutritional factors present in this type of food, including their contents of enzyme inhibitors, lectins, flatulence factors, tannins, phytic acid and saponins. Anti-nutritional factors can cause detrimental effects to humans and animal growth and performance by impairing intake, uptake, or utilization of other food and feed components, or by causing discomfort and stress to humans and animals. The anti-nutritional factors mainly occur in pulses and grain legumes and foods and feed material prepared from grain legumes and pulses.

Substance which, from nutritional point of view, interferes with normal growth, reproduction or health when consumed regularly in amount existing in a normal component of diet should be considered as harmful and toxic. A significant part of human population relies on legumes as staple food for subsistence, particularly in combination with cereals. They are unique foods because their rich nutrient content including starch, protein, dietary fibre, oligosaccharides, phytochemicals (especially the isoflavones in soybean) and minerals. Their nutritional contents contribute to many health benefits to human.

Introduction

The improvement of the quality of foods can be made by fortification of foods nutrients quality and quantity in food. It can be a very cost effective public health intervention. As a result of the high consumption pattern of dairy products viz. yogurt, the fortification process will effectively diminish or prevent diseases associated with nutritional deficiencies (Gahruie et al., 2015). However, due to nutrients deficiencies in human population especially in certain stages of life, holding, importing, and consumption of fortified foods is increasing (Preedy et al., 2013). As a general rule, addition of one or more essential nutrients to a food and increasing their concentration in that particular food to levels higher than normal is known as fortification. This is intended at preventing and correcting shortages in one or more micronutrients in the society or specific population groups (Bonner et al., 1999). The major ways of food fortification are (1) commercial and industrial fortification for wheat flour, corn meal, cooking oils, (2) bio-fortification of crops to augment their nutritional value, which can include conventional as well as selective breeding, and genetic engineering and (3) house hold fortification like vitamin D drops. Fermentation has twofold outcome on glycemic index though there are conflicting results after consumption. The reduced glycemic index of fermented food has been featured to the production of short?chain organic acids during fermentation.

The food we eat contains nourishing substances called nutrients which are required by human body for proper functioning and maintenance of body health. They are classified into five groups such as:

Carbohydrates,

Protein,

Fats,

Minerals

Vitamins

1. INTRODUCTION

Fruits and vegetables represent highly perishable items of agricultural produce, mainly because of their high water content in the fresh form. Fruits and vegetables vary greatly in their protective covering, peel or rind, and also in shape, size, colour, texture and flavour. Their care starts from the field of harvest, including pre- harvest care to reduce postharvest infections and maintain quality. Because of the high rate of perishability in fresh form, fruits and vegetables are preserved by processing into several forms and choices, depending on the specific commodity to ensure reduction in mass, render storage stability for extension in storage life for both domestic and foreign trade over variable distance and time.

Food preservation can be defined as the science which deals with methods of prevention of decay or spoilage of food, thus allowing it to be stored in a fit condition for future use. In this chapter, food preservation and have been discussed in abroad way.

Thus, sugar serves as a preservative in jam and jelly, whereas salt is the major preservative for pickle. RTS (Ready-to-Serve) beverage under acidic conditions in pasteurized form can be stored at room temperature for approximately three months while dehydrated products with 5% residual moisture with suitable packages, depending on the low hygroscopicity can find storage life upto 12 months. Intermediate moisture product with 25% residual moisture is becoming popular to consume mango or papaya strips directly in ready-to-eat form. Storage quality of such forms assumes greater importance. The use of synthetic preservatives is highly questioned in the modern days. However, low concentrations of potassium meta-bisulfite and sodium benzoate are still in use. Formation of benzene under acidic conditions for example in products like RTS beverage by the use of sodium benzoate is said to be dangerous, as benzene is known to be carcinogenic. This takes us to a subject of food safety including hygiene and HACCP. Good manufacturing practices are practically the most useful form of product preparation to expect safety.

1. INTRODUCTION

Wild pomegranate (Punica granatum L.) is one of those fruits which has got a great economic importance. The name “pomegranate”is derived from Latin pomum (apple) and granatus (seeded) which has influenced the common name for pomegranate in many languages (like in German Granatapfel, seeded apple). It has widely been cultivated throughout India and drier parts of South-East Asia, Malaysia, the East Indies and tropical Africa. The most important growing countries of pomegranate are are Egypt, China, Afghanistan, Pakistan, Bangladesh, Iran, Iraq, India, Mayamar and Saudi Arabia. In India, it grows in the vast tract of the hill slopes of Jammu and Kashmir and Himachal Pradesh. One of the important centers of wild pomegranate, in Himachal Pradesh is Darlaghat, located about 50 Km from Shimla. The fruit provides substantial income to the farmers particularly where it is found growing wild such as in Mandi, Kullu, Sirmour, Solan, Shimla, and Chamba districts of Himachal Pradesh. It is found very common and gregarious in drier and sub-marginal land of mid hill regions of outer Himalayas at an elevation of 900-1800 m above mean sea level (a.m.s.l). Wild pomegranate is considered as one of the commercial fruits of Himachal Pradesh in the form of dried arils popularly known as “Anardana”. Besides Anardana, other value added products can also be prepared from this fruit as detailed in this chapter.

1. INTRODUCTION

Food processing industries are engaged in production of different types of processed products and generate various types of wastes. These wastes, whether solid or liquid, on one hand are a direct loss to the producer or manufacturer and on the other hand create environmental pollution, if not disposed properly. Therefore, the processors would always like to minimize these wastes. The generation of wastes not only cause economic losses but would also require additional cost for their management and disposal. As a matter of fact, it is often estimated that proper use of efficient machinery and careful handling during various operations can lead to more than 50% reduction in losses.

In general, the wastes from the food processing industries are either not utilized or primarily utilized as animal feed, fertilizer and in preparation of by-products on a limited extent. Many of the wastes such as cuttings and shreds from the fruit and vegetable processing industry can be used as animal feed. Fruit and vegetables wastes can also be used for extraction of starch, pectin, natural colouring matter, fat, essential oils etc. Wheat and maize bran alongwith palm kernel are used for the production of feed for chickens. Various oils and oleoresins having enormous pharmaceutical properties can be obtained from the spice processing industry.

Fermentation is a cheap and energy efficient means of preserving perishable raw materials. It commonly does not require any sophisticated equipment, neither is the storage of fermented products a big issue. Fermented foods play an important role in providing food security, enhancing livelihoods and improving the nutrition and social well being of millions of people around the world, particularly the marginalised and vulnerable population across the developing countries.

1. INTRODUCTION

With diverse agro-climatic conditions, India produces a wide variety of horticultural crops and out of these crops and out of these apple (Malus x domestica Borkh.) occupies a prominent position in India. It is processed into different products like juice, concentrates, wine, cider, canned slices etc. Apple processing is one of the major industries in countries of the world including India, where it is processed in different states like H.P, Jammu and Kashmir and Uttarakhand. Apple pomace is a left-over residue after juice extraction containing peel, seeds and remaining solid parts and represents about 25-35% of the weight of the fresh apple processed. At prasent, it is a waste and its disposal is a major environmental problem (Plate 1). Being precious natural resources its utilization is a challenge and opportunity to the scientists and technologists. It may be a good substrate for the pectin esterase enzyme, animal feed, citric acid, ethanol and biocolour production. It could be a good substrate for the production of microbial colours under SSF which otherwise require a costlier medium for its production. Different products using solid state fermentation of apple pomace forms the subject matter of this chapter. Here the efforts made to utilize apple pomace especially to explore the possibility of making value added products using Solid State Fermentation (SSF) have been summarized.

1. INTRODUCTION

Colour affects every moments of our lives, strongly influencing the cloths we wear, the furnishing in our house and garden, and the appeal of foods. Not only this, colour aids the recognition of food and also has psychological appeal on the enjoyment of food. It is also one of the first characteristic perceived by our senses and help in determining acceptability, judging the quality and basic aesthetic value of food. Addition of colour to the food ensures the uniformity and intensifies the naturally occurring pigments in our food. To achieve this, historically natural or bio-colours have been used extensively till the end of 19^th century, when synthetic colours called ‘coal tar dyes’ were developed that acquired a widespread acceptability. But unfortunately, these are not totally safe for human consumption; for example high levels of erythrosine intake causes thyroid tumors, while Ponceau 4R, tartrazine and sunset yellow were found to be allergic. Many dyes used as colourant have been proved to be carcinogenic. The consumer wants to see the food looking natural as the synthetic colours have been proved to be carcinogenic to humans. Thus, increasing consumer awareness for natural products with almost no chemical additive and certified dyes (which was earlier considered safe) has necessitated the need to exploit food colourants of natural origin. Natural colours are generally extracted from materials of biological origin like fruits, vegetables, seeds, roots and microorganisms, and are often called as ‘Biocolours’. Microorganisms like Rhodotorula, Sarcina, Chromobacter have been proved to be a good source of biocolour.Colour has also been successfully produced from microorganisms using apple pomace as a base for the growth medium of biocolour producing microorganisms.

1. INTRODUCTION

Marketing is a general term used to describe the activities that lead to the sale of your product. It is the process of planning and executing pricing, promotion and distribution programs to satisfy customer needs. It involves collecting information, analyzing alternative market outlets, developing different product forms, pricing products to compete in the marketplace, defining the scope of the proposed market area and meeting consumers’ needs. So marketing is more than just selling a product or service. It is an essential part of any business. Without a good marketing program, even the best businesses fails.

Value-added agricultural groups typically don’t pay enough attention to marketing. Selling agricultural commodities usually only involves hauling the commodities to a market where there is usually a willing buyer. So farmers often spend their time analyzing brick and mortar issues associated with processing and manufacturing (making the product rather than marketing the product). Often the attitude is that, if we make the product, someone will come along and buy it. So value-added agricultural businesses consistently fail because they do not understand the importance of designing and implementing a good marketing program.

As a first step, ‘A Marketing Primer and Marketing Basics’ will help you with a basic understanding of marketing. Successful marketing involves designing and implementing a marketing strategy for your product. Marketing Strategies provide generic strategies for various types of products and product buyers. In a simple term, marketing activities and strategies result in making products available that satisfy customers while making profits for the companies that offer those products.

Introduction

Food ingredients sector is indicating ample prospects for growth. The segment is an obligatory element for the growth of the food and beverage sector. These ingredients are also driving the development of the healthy functional foods industry to increase by 20% growth annually. Innovation in the food and beverage market, especially in the processed food domain, has created innumerable opportunities for new product development in the ingredients market as well. The segment is driven by the growing food processing industry and India is emerging as ingredients bowl of the future. Additionally, growing urbanization coupled with industrialization and changing lifestyles have led to growing demand for convenient food that offers health benefits, over and above the basic nutritional benefits of the foodstuff. There are nearly 10 to 15 broad classes of ingredients that include the very basic ingredients as well as certain value added ingredients that have niche applications. Key ingredients are preservatives, flavours, colours, hydrocolloids/stabilizers, emulsifiers, artificial sweeteners and value added health food ingredients such as omega-3-fatty acids prebiotics, probiotics etc. Until recently, there has been limited research into functional foods in meats, while functional foods in the dairy sector have been developed to a high degree. But meat is less allergenic than many other foods and much more research into the development and marketing of novel functional meat products is required. Such meat products would open up a new market for the meat industry. Nutraceutical and functional food industry is a very vibrant industry today with the claims and a clear mandate of health, wellness and prevention of diseases as one of its main goals.

Introduction

Hippocrate, an ancient physician, a great thinker and also often referred as father of medicine, for the first time conceive the idea nearly 2,500 years ago that a disease is caused due to natural factors such as environmental factors, diet, and living habits. He advocated the secret of healthy living in healthy food in his famous quote “Let food be thy medicine and medicine be thy food”. But unfortunately, this wisdom about food has faded with the time and we became dependent on synthetic medicines and drugs for even life style disorders. In the last century, research advancement in the field of food science and nutrition established food not only as a source of nutrition but also a source of active food components that aid specific functions and rejuvenated the Hippocrates concept. According to the Department of Health and Human Services, USA, daily diet of a person, plays a crucial role in 5 of 10 diseases which are the leading causes of death, such as diabetes (noninsulin dependent or type 2), stroke, coronary heart disease (CHD), specific type of cancer, and atherosclerosis. In the mid-1980s, term “functional food” was introduce in Japan and defined as food that contain active components either from plant or animal origin and provide physiological benefits in addition to the basic nutritional needs.

1. The first impression of a food is usually visual and major part of our willingness to accept a food depends upon its
   1. Size
   2. Shape
   3. Colour
   4. Texture
2. Colour can serve as a useful criterion of
   1. Quality
   2. Nutrition
   3. Texture
   4. Acceptability

In India after rice wheat (Triticum aestivum L.) is the second most important cultivated food crop belonging to family poaceae. Total production of wheat was 760 million tons in India during 2016-2017 (FAOSTAT, 2017) which is second largest in the world after china. In India highest producing state of wheat is Uttar Pradesh followed by Punjab, Haryana, Madhya Pradesh, Rajasthan etc. Wheat is categorize into seven commonly known wheat classes those are hard red spring, hard red winter, soft red winter, hard white, soft white, durum and mixed wheat (Khamis, 2014). 

Abstract

The objectives of the study is to help to create self-employment and provide proper information for different conventional milk based products. Traditional dairy foods have always played a crucial role in preservation of precious milk nutrients and promotion of its use among masses. The demand for milk and milk products is increasing with increasing of world's population. To meet these needs, high-end technology is needed for emerging the capability of milk production and preserving it by producing high quality milk products. The dairy industry is highly localized owing to perishable nature of milk products. Approximately 50% of the total milk produced in India has been projected to be processed into a variety of conventional milk products, such as khoa, chhena, paneer, dahi, ghee, kalakand and a wide range of sweets in rural areas mostly by the rural citizens. Therefore, setting up a milk-based food production system and updating conventional technologies to manage milk-based products on a commercial scale is very important.

1. Sample: One or more units selected from a population of units, or a portion of material selected from a larger quantity of material
2. The Standard Operating Procedures (SOPs) should contain full working instructions as well as information on applicability, expected performance, internal quality control (performance verification) requirements and calculation of results. It should also contain information on any hazards arising from the method, from standards or from reagents.
3. Analytical Samples: The quantity of the analytical sample to be used is usually indicated in tests and assays. Unless otherwise specified, the quantity used may deviate by 10% from that stated. All quantitative determinations should be conducted on triplicate test portions and in these cases, the amount actually taken should be accurately weighed or measured and the result of the analysis calculated on this exact quantity. When substances are to be “accurately weighed” in a test or assay, the weighing is to be performed in such manner as to limit the error to ± 0.1% or less. Quantities smaller than 100 mg should be weighed to the nearest 0.1 mg.

1. Proteins in solution absorb ultraviolet light with absorbance maxima at 280 and 200 nm. Amino acids with aromatic rings are the primary reason for the absorbance peak at 280 nm. Peptide bonds are primarily responsible for the peak at 200 nm.
2. Aromatic amino acids tyrosine and tryptophan give proteins their characteristic ultraviolet (UV) absorption at 280 nm, which is routinely used to estimate protein concentration. Phenylalanine and disulfide bonds also contribute to absorption at 280 nm, albeit slightly.

3.1. Maturity

• During process of maturation, fruit receives regular supply of food material from plant.

• When mature, abscission or corky layer forms at stern end stops inflow.

• Afterwards, fruit depends on own reserves, carbohydrates dehydrated and sugars accumulate until sugar acid ratio form.

• In addition, typical flavour and characteristic colour also develop.

• Stage of maturity at the time of picking influence storage life and quality of fruit

• Fruits harvested over mature or full ripe are easily susceptible to microbial and physiological spoilage and storage life reduction.

• Necessary to pick up fruits or vegetables at correct stage of maturity to facilitate proper ripening, distant transportation and maximum storage life.

• Principles of harvest maturity

? Harvested commodity should have its peak acceptable quality when it reaches the consumer.

? Produce should develop an acceptable flavour or appearance.

? Produce should have optimum size and shape required by the market.

Introduction The method of drying is expressed as applying heat under controlled conditions to remove the water or moisture from foods to get a dry product with low moisture content. The primary commitment of drying is to extend the shelf-life of foods by diminishing their water activity. Due to low water activity, microorganisms which cause food spoilage and decay and many of the enzymes which promote undesired changes in the chemical composition of the food are unable to grow, multiply or function. The need for drying in the food industry is increasing day by day, and Novel dehydration techniques are being invented for a more efficient drying process, less energy-consuming, and preserve the product characteristics and nutritional profile. Further, the drying technology is critical for moisture removal from food and non-food materials. Small scale farmers use this food preservation method as an indigenous method and the food processing industry as modern technology. Dried products have numerous benefits compared to raw products, including an extended shelf-life and reduced packaging, storage, handling, and transportation costs. However, drying is a highly energy-intensive food processing operation.

Introduction In today’s environment, the greatest challenge for the food industry is to develop health promoting foods; it is determined by the raw materials used and its impact on consumer health. Furthermore, people lifestyle has changed greatly, resulting in a change in food eating patterns. In today’s world, people are moving towards eating foods that are nutrient base and tasty (Bonciu, 2018). of all the nutrient based products available in market, expanded snacks have become a popular snack all over the world because of its crunchy texture and low density making it consumer’s acceptance (Grasso, 2020). The basic idea for developing any expanded snacks is utilizing a starch-based material for a better crispy and crunchy product, but to make it more nutritious incorporation of protein and fibre rich raw materials is recommended (Gu et al., 2017). Along with the raw materials, the other important parameters for developing any extruded product is the particle of the flour, its physicochemical and rheological properties of the extrudates are much concentrated (Bouasla & Wójtowicz, 2021) Thereby, extruded snack is considering as functional food with major health benefits.

Introduction The onion (Allium cepa) is one of the world's oldest cultivated crops, with a history dating back over 5,000 years (Gorrepati et al., 2014). At present, India is one of the world's largest producers and exporters of onions. At the time, India ranked second in onion production with a yearly production of around 23262 TMT and an average yield of 18.10 MT/ha (Prajapati and Saini, 2019; Horticulture Statistics at a Glance, 2018; Tripathi and Lawande, 2016). Maharashtra, Madhya Pradesh, Karnataka, Gujarat, Rajasthan, Bihar, Andhra Pradesh, Haryana, West Bengal, Uttar Pradesh, Chhattisgarh, Odisha, Tamil Nadu, Jharkhand and Telangana are the major onion producing states in India. Maharashtra alone covers 55-60% of countries total production. Solapur, Satara, Dhule, Jalgoan, Osmanabad, Beed, Latur, Aurangabad are the major onion producing districts in Maharashtra (Tripathi et al., 2005). Unfortunately, India witnessed around 40-50% post-harvest losses of onions every year (Prajapati and Saini, 2019).

Introduction India is a country of festivals and celebrations. Indian sweets enjoy a legendary reputation across the world. India is home to a number of delicious sweets that play a vital role in every Indian celebration. While gulab jamuns, rasgullas and kaju katlis may be the most popular sweets in the country (Pal Sanchari, 2016). Functions and events in India are celebrated with intake of sweets. Also, it is customary to sweeten the mouth in social gathering like marriage, birthday, poojas, etc. (Gulati and Misra, 2014). In the past few years, guidelines are formulated based on analyses of all published scientific studies on the consumption of sugars. In view of the rising prevalence of overweight, obesity and related disorders globally, in 2002, the WHO recommended that sugar should be less than 10 percent of daily calories. The consensus dietary guidelines for Indians in 2011 recommend less than 10% of total calories from free sugars per day. In May 2014, the expert panel of WHO recently recommended decreasing sugar intake to 5% of total calorie intake to combat obesity. A high intake of added sugars is a primary risk factor for diabetes. It is these added sugars in sweets that makes them palatable, but also does the physical damage. (Willet Brian, 2011). People have developed taste towards food in which fat and sugar contents are high.