eChapters

Introduction
• A cell is the most basic structural and functional unit of life. These are of two types:
i) Prokaryotic cells– Prokaryotes are those cells which lack a membrane bound nucleus and other membrane bound cell organelles. These cells are primitive cells. Examples, bacterial cells, archaeal cells.
ii) Eukaryotic cells– Eukaryotes are those cells which have distinct membrane bound organelles. These are advanced cells. Example, animal cells, plant cells, fungi.
• A microorganisms (from the Greek: mikros, “small” and organism’s, “organism”) are those small living organisms which cannot be seen with naked eyes. These are of two types:
i) Single cell– Organism made up of a single cell.
ii) Multi-cellular– Organism made up of multiple cells.
Shape and Arrangement of Bacterial Cells
• Prokaryotes display following shapes
• Spherical cells called Cocci
• Cylinders called rods or Bacilli
• Coma shaped called Vibrio
 

Meat and Meat Products

    1.    Meat can be defined as “the muscle tissue of slaughter animals”.
    2.    meat is composed of water, fat, protein, minerals and a small proportion of carbohydrate

6.1 Introduction

The food industry produces large volumes of waste both solid and liquid, starting from the initial step of raw material to the final consumption of processed food. Apart from a loss of valuable biomass and nutrients, the generated waste poses increased disposal and potentially severe pollution problems. Meat and meat industry is no exception where slaughter houses, meat processors, wholesalers and rendering plant generates huge amount of waste [1, 2].

Meat and meat processing industry, is among the least profitable industries despite its immense size and large gross sales. Effective recovery and utilization of by-products and wastes is the lifeline of meat and poultry processing industry. Thus, it becomes imperative that an effort be made to reduce expenses by employing the use of new or modified processing methods and through in-plant treatment, where waste effluents and by-products could be recovered and often upgraded to useful products of higher value. Meat processing wastes have a potential for recycling raw materials or for conversion into useful products of higher value as by-product or even as raw material for other industries or for use as food or feed after biological treatment.

Abstract

The interest in the utilization of industrial by-products is increasing day by day and is major reason for exploring different meat, poultry and fish industry waste and optimization of extracting conditions of different valuable compounds. Utilization of these by-products in effective manner can be positive for meat industry economy as well as environmental pollution of the country. Besides the potential revenue losses, non-utilized or underutilized by-products accounts for the extra cost for their disposal. Meat producers are converting these by-products into value added edible and inedible form. Among the most prominent current uses of meat, poultry and fish waste are food ingredients, water treatment, cosmetic and personal care products, biogas/biodiesel, biomedical and pharmaceutical application. Several studies have dealt with the production of several value-added products such as gelatin, collagen, enzymes, specific proteins, bioactive peptides, chitin, chitosan, and pigments fro m the meat industries waste. Recently, in the food and pharmaceutical industry, an increasing number of new applications have been found for products generated from meat, poultry and fish industry waste; in different products as foaming agents, emulsifiers, biodegradable film-forming materials, colloid stabilizers, and microencapsulating agents, in line with the growing trend to replace synthetic agents with more natural ones.

INTRODUCTION

Meat is the flesh of animals that is used for food and consists of muscle, fat and bone. If the muscle which is commonly known as the lean meat, is examined under the microscope, it is seen to be made up of bundles of fibers held together by a thin membrane called connective tissue. Further study reveals that these fibers are in readily hollow tubes that vary in length in different animals and in different muscles in the same animals that are filled with a fluid, sometimes called muscle juice, which is known to contain protein, minerals and extractives. The forms of protein in the muscles are myosin (a globulin) and myogen (an albumen) and in addition, on red meats, hemoglobin.

The biofilm formation is usually assayed by using Congo Red Agar (CRA) plate test. According to a method developed by Freeman et al., (1989) the isolates are stored in nutrient agar slants and screened for biofilm formation ability using CRA plates. Biofilm forming strains are observed as dark black colonies while others as red colonies on the CRA plates. Recently, the concept of these biofims have changed with new imaging technologies, biochemical methods and molecular ecosystem biology tools. A biofilm structure can be observed in 3-D form to the nano-scale level (Neu and Lawrence, 2015). A lot of studies are being conducted on the physiology of the biofilm cells, the genotypic and phenotypic variation among the biofilm community, as well as the biofilm metabolome, proteome and transcriptome (Raes and Bork, 2008). This will help in the the development of efficient methods to control deleterious biofilms (clinical biofilms, food contaminants, biofouling on industrial equipment and on ship hulls) and to enhance and modulate beneficial ones

A large number of people in developing countries have traditionally depends on products derived from plants, especially from forests, for curing human and livestock ailments. Additionally, several aromatic plants are popular for domestic and commercial uses. Collectively they are called medicinal and aromatic plants (MAPs). About 12.5% of the 4,22,000 plant species documented worldwide are reported to have medicinal values. With dwindling supplies from natural sources and increasing global demand, the medicinal and aromatic plants, will need to be cultivated to ensure their regular supply for processing and value added products.

The term “Medicinal and Aromatic plants” generally denotes those non-aromatic and aromatic plants, which are used for medicinal, perfumery, dye and cosmetic purposes. They are rich in secondary metabolites and are potential sources of drugs. Generally the whole plant roots, stem, bark, leaves, flowers, fruits, gums and oleoresins, etc. are used.

India has been considered as treasure house of valuable medicinal and aromatic plant species. Ministry of Environment and Forests have identified and documented over 9500 plant species considering their importance in the pharmaceutical industry. In the present context of ‘back to nature’ in health care, it is relevant that these valuable plant species are not only preserved but also their cultivation developed in order to meet the entire demand of the domestic industries as also to exploit the bright prospect for export. Shift from collection to cultivation of medicinal & aromatic plants will also ensure purity, authenticity and sustainable supply of raw materials required for herbal drugs, including polyherbals.

Gladiolus saundersii

Introduction

The incidence of diabetes mellitus is increasing all over the world and is becoming a problem of significant importance. Diabetes mellitus is a disease of CHO metabolism and WHO has declared India as the diabetic capital of the world. Globally diabetes affects 246 million people, which is about 6% of the total adult population. It is the fourth leading cause of death by disease and every 10 seconds, a person dies from diabetes related causes in the world.

The growing number of diabetic patients and the current and probable future need for health care constraints will mean that high quality diabetic care will become increasingly difficult to be delivered in the future. This requires identification & implementation of cost effective treatment measures that will improve diabetes care in the long term, decrease the associated morbidity and reduce the high direct and indirect costs of its management. This can be possible by incorporation of cost effective and efficient medicinal plants in the management of diabetes. Toxicity and side effects of modern system of medicine have highlighted the importance and relevance of traditional medicinal plants. India has about 45,000 plant species and several thousands have been claimed to possess medicinal properties. Among Indian traditional medicinal plants several potential anti-diabetic plants and herbs are being used as part of our diet since prehistoric time.

In India, medicinal plants have been used as natural medicine since the days of Vedic glory. Historically, in ‘Atharva-Veda’ (about 200 B.C.) description of medicinal plants was made under a separate chapter ‘Ayurveda’. The medicinal values of plants have been tested by trial and error method for a long time by different workers and opened great opportunities for scientific investigations of herbal medicines for cure of diabetes and its complications.

Medicinal plants used to treat hyperglycemic conditions are of considerable interest for ethno-botanical community as they are recognized to contain valuable medicinal properties in different parts of the plant and a number of plants have shown varying degree of hypoglycemic and anti-hyperglycemic activity. The active principles of many plant species are isolated for direct use as drugs, lead compounds or pharmacological agents. Traditional plant medicines or herbal formulations might offer a natural key to unlock diabetic complications if utilized with care.

11.1. Origin and distribution

• Originates in India

• Sikkim, West Bengal, Odisha, Upper Gangetic Plains and in Nilgiris, ascending to altitude of 1600 m.

• North-east, North-west, Southern as well as Central India, and extends into Myanmar and China.

11.2. Economic importance

• Economic part - Whole plant

• Raw materials for production of steroidal drugs, steroid bearing solanum

• Yields a glyco alkaloid, solasodine, a nitrogen analogue of diosgenine.

1. Introduction

Pulpy and juicy fruits like orange, guava, banana, grape, mango, papaya, pears, apples and jackfruit can be converted into fruit products like squashes, juices, cordials and ready-to-serve (RTS) fruit beverages. These RTS fruit beverages are both refreshing and thirst quenching and have become very popular. Liquid fruits are the clarified juices prepared from these pulpy and juicy fruits. There is a demand for liquid fruits in the international market for various applications. The liquid fruits can be used as a natural alternative to synthetic beverages. They can be suitably concentrated or diluted, blended with other juices and also can be carbonated as fruit based soft drinks. Removals of pulpy material from the juices make them easier to preserve by pasteurization and are amenable to carbonation. Pulpy fruits can be successfully processed into liquid fruits (clarified juices) by using pectic enzymes. The emphasis of the fruit juice processing industry has, so far, been mainly on conventional clarification processes like enzymatic and chemical treatments followed by filtration using filter aids; and concentration by vacuum evaporation.

Introduction

Since 1990, there has been a lot of interest in functional foods and nutraceuticals, particularly because of their impact effects on human health and the prevention of certain diseases. Apart from growing good quality natural products, there are challenges in extracting, refining, analyzing active ingredients, and evaluating safety before an effective, reliable product is made [1,2]. Special attention needs to be focused on separation and purification mainly because 40-80% of the cost of production is assigned to separation and purification unit operations in making functional foods and nutraceuticals. There are also several carotenoids and polyphenol products that have been identified from various plants and a single plant could contain highly complex profiles of these compounds. These are labile to heat, air, and light, and they may exist at low concentrations in the plants. This makes the separation and detection of nutraceuticals a challenging task. The membrane techniques used for the separation of nutraceuticals from the natural products, as well as their applications and influencing factors are discussed in this chapter [3, 4].

4.1. Introduction

Packaging of materials protects, surrounds, and contains food products. It is necessary from processing and manufacturing stage till the final consumption through storage and handling. In 1804, Nicolas Appert, a French confectioner, discovered a method of “conserving all kinds of food substances in containers.” In 1810, the Ministry of the Interior’s Bureau of Arts and Manufactures paid Appert an ex-gratia payment of 12,000 francs on the condition that he publish the details of his process. Appert avoided the use of tinplate in his study. However, in the early nineteenth century (1810), Phillipe de Girard, a French inventor, filed a patent referring to the replacement of glass jars and bottles with tin cases. The official confirmation in the New York Evening Post on July 18, 1822 by Daggett and Kensett is thought to be America’s first offering of preserved provisions in tin cans (Bishop, 1978). Table 1 shows the evolution of metal packaging materials at various stages.

The increasing global emphasis on sustainable and environmentally friendly energy alternatives has placed biofuels at the forefront of green energy innovation. Derived from agricultural biomass and organic waste, biofuels represent a promising substitute for conventional fossil fuels, particularly in agrarian economies where such feedstocks are abundantly available. Agricultural biomass includes crop residues such as rice straw, wheat husk, corn stover, sugarcane bagasse, and oilseed cakes. Meanwhile, organic waste comprises food waste, animal manure, municipal solid waste, and industrial organic residues. Converting these materials into biofuels not only reduces landfill burden and environmental pollution but also cuts down greenhouse gas emissions and promotes the development of rural and circular economies. A variety of biofuels—including biogas, bioethanol, biodiesel, biohydrogen, and syngas—can be produced through two major conversion pathways:
• Biochemical conversion, which involves microbial and enzymatic processes such as fermentation and anaerobic digestion.
• Thermochemical conversion, which includes pyrolysis, gasification, and combustion processes to transform biomass into energy-dense fuels.
Types of Liquid Biofuels
The term biofuel commonly refers to liquid fuels produced from recently living plant material, unlike fossil fuels derived from ancient biomass. Among these, ethanol and biodiesel are the most prevalent forms:
• Ethanol: A type of alcohol produced through fermentation, usually from sugar- or starch-based crops like corn, sugarcane, or cassava. Ethanol is used either as a fuel substitute or blended with gasoline to reduce carbon emissions in vehicles.
• Biodiesel: Produced through the transesterification of oils extracted from plants and seeds (such as soybean, sunflower, or palm), biodiesel is a renewable fuel that can be used in standard diesel engines. It offers a biodegradable, less polluting alternative to petroleum-based diesel.

Skeleton Leaves

Skeleton leaves are semi-transparent leaves, also called fossil leaves. They are prepared by soaking the fresh leaves in bleached water and then by hand rubbing the soft green flesh from the network of veins. The leaves can be then dyed to variant colors to give them a beautiful and pleasing appearance. Although delicate by nature, they are actually sturdy and can easily be glued to a variety of surfaces. They come in several colors and sizes to meet a complete line of crafting needs. The delicate beauty of these leaves is sometimes meant to capture life, hope and memories. These delicate, gorgeous skeleton leaves are a perfect accent for all craft projects. They make a beautiful and elegant statement when they adorn your wedding invitations. They work surprisingly well on gift tags, greeting cards, scrapbooks, collages, papermaking, stenciling, and stamping. They are perfect for decorating bridal bouquet, wedding reception table, candles, and wedding favors.

Several attempts have been made to detect the biopotentials of microorganisms with reference to their ability to produce various enzymes with a view to use them in industrial processes and bioremediation applications. Enzymes are increasingly used as a new route to synthesize food ingredients such as flavours, emulsifiers, sweeteners, food additives, nutrients. With the advent of genetic engineering, a wide range of enzymes has become available on a large scale and this has increased the scope of enzyme technology.

MICROBIAL ENZYMES: Enzymes are proteinaceous complex organic catalysts of biological origin and vital constituents of cells. Microbes produce a variety of enzymes, intracellular and extracellular enzymes. Most of the microbial enzymes produced for commercial usage are extra cellular enzymes. Extracellular enzymes are secreted outside the cell and hydrolyze polymeric substances. Amylases and proteases are enzymes of economic importance. At present over 60 enzymes are in commercial use, of which three-quarters are hydrolytic enzymes. Commercial production of microbial enzymes utilizes a variety of fungi, yeasts and bacteria. The composition of the medium, genetic stability of the microbial strain and physical and chemical factors of fermentation influence the production of a particular enzyme.

Enzymes catalyze a variety of reactions during processing and preservation of food products and form a large group of processing aids. Food industry utilizes enzymes in the production of bakery items, dairy products, fruits and vegetables juices and products, tenderization of meat, modification of oils and fats, flavour production and preservation of food products. Enzymes have also found use in the manufacture of ingredients like glucose, high fructose syrup, citric acid, colour and flavour constituents.

SINGLE CELL PROTEIN (SCP) AND PROTEIN DEFICIENCY

Protein is an essential component of diet. The greatest single problem in the world today is global food protein shortage. Having adequate quantity of food is only one side of the picture, but the most important aspect is the supply of balanced and nutritious food. All efforts are being made to increase the food production through modern methods of farming. But very little attention is being paid towards protein requirements and production. Approximately half of world population suffers from the protein deficiency disease called ‘Kwashiorkor’ and children with poor protein are victims of this disease.

Usually, cereals have low protein values while protein rich pulses are not available in desired quantities due to poor yields and high costs. The good quality protein available in fish, meat, poultry, and eggs is not available due to poor economic condition as well as varied dietary habits. With the current system of production, agriculture cannot be relied upon to feed an ever increasing world population. Hence there is an urgent need to find other protein sources. The best potential is seen in microbial protein or single cell protein (SCP), a new source of protein independent of agriculture.

DEFINITION: The dried cells of microorganisms such as bacteria, fungi, yeasts, algae that are grown in large scale culture systems as proteins for human or animal consumption are collectively known as "single cell proteins".

Introduction

Hippocrate, an ancient physician, a great thinker and also often referred as father of medicine, for the first time conceive the idea nearly 2,500 years ago that a disease is caused due to natural factors such as environmental factors, diet, and living habits. He advocated the secret of healthy living in healthy food in his famous quote “Let food be thy medicine and medicine be thy food”. But unfortunately, this wisdom about food has faded with the time and we became dependent on synthetic medicines and drugs for even life style disorders. In the last century, research advancement in the field of food science and nutrition established food not only as a source of nutrition but also a source of active food components that aid specific functions and rejuvenated the Hippocrates concept. According to the Department of Health and Human Services, USA, daily diet of a person, plays a crucial role in 5 of 10 diseases which are the leading causes of death, such as diabetes (noninsulin dependent or type 2), stroke, coronary heart disease (CHD), specific type of cancer, and atherosclerosis. In the mid-1980s, term “functional food” was introduce in Japan and defined as food that contain active components either from plant or animal origin and provide physiological benefits in addition to the basic nutritional needs.

The term growth for bacteria and other microorganism usually refers to changes in the total population rather than an increase in size or mass of an individual organism. As the mechanism of conservation and dissipation of heat generated during metabolism lacks in bacteria, the enzyme system in bacteria gets directly influenced by temperature. The purpose of studying the bacterial growth curve is a) to become familiar with the population growth dynamics of bacterial culture and b) to plot a growth curve and determine the generation time of bacterial culture.

A number of methods are now available for measuring bacterial growth. Some important ones are

1)By colony counting or cell counting

2)By weighing the cells

3)By cell activity (turbidity method)

1. INTRODUCTION

Flavour is a distinctive property of a substance affecting the gustatory sense. It may be defined as “The sum of those characteristics of any material taken in the mouth, perceived principally by the senses of taste and smell, and interpreted by the brain.” Flavour perception is a complex process which requires the particles to be mixed with saliva and salivary enzymes to promote the release of flavour. Flavour molecules are very diverse in nature. More than 5000 compounds in food have been identified as flavour components which can be detected at very low concentration and are thus, used in products at very low levels. Hexenols and hexenals, characteristic of green taste of fresh fruits and vegetables, can be perceived at a concentration of about 1 part per million (ppm). Naturally occuring flavour compounds are present at a very low concentration ranging from parts per trillions (ppt) to parts per millions (ppm) level. Majority of these compounds are volatile, with boiling points in the range of 20-300 °C. Most of these compounds are lipophilic and possess a great diversity of chemical group and structure with molecular weight ranging between 50-250 g/mol.

Flavour and fragrance compounds are a part of expanding industry with an estimated cost of nearly $27 billion. These comprise of diverse molecules with unique structures and functional groups that contribute to varied aroma and flavour, ranging from floral to fruity notes. The processing operations modify the equilibrium between the different components in raw food that might weaken the original flavour, which require subsequent supplementation. These flavour supplements can be natural or chemically synthesized. Of all the available flavour compounds, around 80% are produced by chemical synthesis whose use is limited due to formation of racemic mixtures and lack of substrate specificity. The growing awareness of consumers towards chemicals supplemented to food has led to the development of the flavouring compounds of biological origin referred to as natural flavours or bioflavours. The first major source of flavour compounds was primarily from plants. Identification of microbes producing vital food flavourants paved the way for alternative low cost, efficient and flexible method for the commercial production of flavour compounds.

1. Introduction

Fruits and vegetables have been an integral part of man’s diet from immemorial times. Fruits are the portions of plants that bear seeds, while vegetables are the edible components of a plant, including the leaves, stalks, roots, tubers, bulbs, flowers and seeds. These can be eaten raw or cooked. Fruits and vegetables can be preserved for short-term intervals under refrigeration, with or without receiving a minimal treatment like slicing, chopping, shredding or peeling. Fresh produce may also be irradiated or packaged in controlled or modified atmosphere in films for short-term storage. Long-term preservation includes canning, juicing, drying and addition of preservatives. Food contamination with hazardous biological agents remains a worldwide challenge in food safety and nutrition (Kenny 2002; Schlundt 2002; Tauxe et al 1997). Microorganisms form part of the epiphytic flora of fruits and vegetables and many will be present at the time of consumption. Production practices, growth conditions and the location of the edible part during growth (soil, soil surface, aerial part) will in combination with intrinsic, extrinsic, harvesting and processing factors affect their microbial status at the time of consumption. Man-made sources may be directly from farm laborers and from the equipment used for harvesting or storage. The types of microorganisms on fruits and vegetables would also vary with the orchards, vineyards or growing fields. The resident microflora normally subsists on the slight traces of carbohydrates, proteins and inorganic salts that dissolve in the water exuding from or condensing on the epidermis of the host. The numbers of bacteria present will vary depending on seasonal and climatic variation and may range from 104 to 108 per gram. The inner tissues of fruits and vegetables are usually regarded as sterile (Lund 1992). However bacteria can be present in low numbers in the insides of the fruits and vegetables as a result of the uptake of water through certain irrigation or washing procedures.

A. Enumeration of Different Microflora of Soil
Introduction
Agriculturally, soil is the region which supports the plant life by providing mechanical support and nutrients required for growth. From the microbiologist view point, soil is one of the most dynamic sites of biological interactions in the nature. Soil is an admixture of five major components viz. organic matter, mineral matter, soil-air, soil water and soil microorganisms/living organisms. The amount/ proposition of these components varies with locality and climate.

The soil organisms are broadly classified in two group’s viz. soil flora and soil fauna, the detailed classification of which is as follows.
1) Soil flora
a) Microflora Bacteria, Fungi, Molds, Yeast, Mushroom, Actinomycetes, Streptomyces, Algae e.g. BGA, Yellow Green algae, Golden brown algae.
b) Macroflora

Introduction The Indian culinary world may have just recently embraced the concept of edible flowers, but they have been a part of traditional Indian cuisines since the beginning. Flowers have been used in human diets and gourmet preparations for thousands of years (Fernandes et al., 2020). However, due to increased consumer knowledge about the effects of nutrition on human health, there is a growing trend in utilizing flowers for edible purposes (Chatzopoulou et al., 2020). Edible flowers were used as a relish and flavour enhancer in many savoury and sweet meals in ancient Rome and Greece. In China’s ancient texts and classics, the words and phrases regarding edible blossoms were also recorded by Zhao et al. (2017). Edible flowers come in a wide variety of colors and cooking ways in different nations. Flowers, such as Osmanthus fragrans Lour and Flos Sophorae, have been employed as basic ingredients in a range of Chinese cuisines (Cunningham, 2015). The people of Rome used flowers in cooking. They make salads using violets and roses and sauces using lavenders. Flowers from pumpkin and squash plants have long been used as ingredients in the United States. People consume aromatic flower buds and unopened blossoms in El Salvador and Honduras. Blossoms are frequently used to garnish food at aristocratic banquets and feasts across Europe. Dandelion (Taraxacum officinale) flowers are also added to beverages and salads in many parts of the world.

Introduction

Encapsulation may be defined as a process to entrap one substance (active agent) within another substance (wall material). The encapsulated substance, except active agent, can be called the core, fill, active, internal or payload phase. The substance that is encapsulating is often called the coating, membrane, shell, capsule, carrier material, external phase, or matrix. In the food industry, encapsulation process can be applied for a variety of reasons. Encapsulation is a useful tool to improve delivery of bioactive molecules (e.g. antioxidants, minerals, vitamins, phytosterols, lutein, fatty acids, lycopene) and living cells  (e.g. probiotics) into foods [1]. In most cases, encapsulation refers to a technology in which the bioactive components are completely enveloped, covered and protected by a physical barrier, without any protrusion of the bioactive components. Also, encapsulation has been defined as a technology of packaging solids, liquids, or gaseous materials in small capsules that release their contents at controlled rates over prolonged periods and under specific conditions. Produced particles usually have diameters of a few nm to a few mm.

The science dealing with the measurement of size of any microscopically visible microorganism is known as micrometry which is based on the principle of physics. Before measuring a cell, the diameter of the microscopic field must be established by means of optic devices, namely an ocular micrometer and a stage micrometer.

a)Ocular micrometer : It is a circular disc that is placed in the eyepiece. The disc is graduated in to several small divisions marked from 0 to 100.It is placed inside the eyepiece of the microscope. The distance varies according to the objective of the microscope which can be easily determined by using a stage micrometer.

b)Stage micrometer : It is a glass slide graduated in 1 mm. Again 1mm is divided into 10 large divisions and 100 small divisions (10 x 10 = 100 divisions). These divisions are equally placed therefore 1 small division is equal to 0.01 mm or 10 μm.

12.1 Introduction

Micronization is a size reduction in which particles are reduced down to micrometer resulting in particle-size distribution is less than 10 microns. Acceleration of particles has been involved for particle-to-particle impact or impact against a solid surface. Micron technology is an emerging technology which has a great potential in nutraceuticals and functional foods. By increasing the surface area per unit mass, compared with larger-sized particles of the same chemistry, tiny particles are made more biologically active. A lot of attention has been gained by micronization in food research and development. Functional properties, surface areas and structures gets altered by reduction in particle sizes of different materials (e.g., metal salts, metal oxides, chitosan and organic compounds) by micronization or nanotechnology to micro- or nano-sizes and bring some new applications in the academic world as well as in food industry.

They absorb a large concentration (10-40 wt %) of C0₂ that either swells the polymer or melts it at a temperature below (10 to 50 °C) it’s melting/ glass transition temperature hence, this technique is useful for micronization of especially for polymers. Active substrate(s) in a polymer or other carrier substance can be used with suspensions for micronization process. In manufacturing advanced pharmaceuticals, coating materials, micro sensors, polymers and many other chemicals particle design has been gaining importance. Formulation homogeneity and control particle size can be improved by micronization. Moreover, bioavailability of poorly soluble APIs (active pharmaceutical ingredient) by increasing particle surface area and accelerating dissolution rates can also be improved. Because of the high impact velocities possible as a result of particle acceleration in a fast gas stream, fluid energy mills are used for micronization. Particle velocities in a jet mill are in the range of 300 to 500 meters per second, compared to 50 to 150 meters per second in a mechanical impact mill, in many industrial fields like food technology, pharmaceuticals, catalysts, pigments, and biopolymers, for example, are some categories of products that can be used as micro-sized particles, micronized powders are of great interest. High-temperature reactions that require high energies, on jet milling that is characterized by low efficiencies and mechanical stress, and on liquid solvents precipitation that has a poor control on particle size and can pollute the product comes under the traditional techniques for producing micronic powders. Generally, the control of the powder size and the span of its distribution are still very approximate. In recent years, many supercritical fluids-based techniques have been developed for the production of micronic and nanometric particles. Some particular properties of gases at supercritical conditions such as enhanced solubilization modulation and its power, large diffusivities, organic solvent reduced operation, and the connected possibility of controlling powder size and distribution resulted from this process. Important characteristics of powders like particle size and size distribution have significant effects on dissolution properties, flowability and release kinetics. Therefore, particle engineering is the most important step during processing of powdered foods. Lower micrometer range and sizes are needed for many applications particles with special requirements. Processes like jet milling, pearl milling or high pressure homogenization are used for micronization.

Abstract

Micronutrient (vitamin and mineral) deficiencies affect more than 2 billion people worldwide and are especially prevalent in developing countries including India. Conditions due to vitamin mineral deficiencies account for 7.3 percent of the global disease burden.Iron deficiency (anemia), vitamin A and iodine deficiency disorders continue to be a grim public health problem. Thus, elimination of vitamin and mineral deficiencies is essential to improve the overall health of the masses as well as to sustain economic growth and national development. Food fortification is an effective intervention to deliver vitamin and mineral rich foods to large populations. In addition to the prevention of vitamin and mineral deficiencies, food fortification is an effective measure to raise vitamin and mineral levels by moving the population towards consuming recommended dietary allowances for most micronutrients-making it a long–term and a sustainable strategy. India is the largest producer of milk in the world with 146.3 million tonnes and the consumption rate of milk and milk products by all age groups of people are high.Therefore, fortification of milk with mineral and vitamins could be a safe and effective strategy to fight these micronutrient deficiencies.

1.    Yoghurt usually contains total milk solids in the range of

(a) 12-15%

(b) 8.5 to 11.5%

(c) 15-19%

(d) 20-25 %

2.    Yoghurt is usually manufactured by heating the pre-mix to pasteurize it to

(a) 61-62°C for 20 minutes

(b) 80-85°C for 15 to 30 minutes

(c) 80-85°C for 15 sec

(d) 71-72°C for 15 sec

One of the major discoveries that gave birth to the field of microbiology was the development of instruments that could magnify, so that objects too small to be seen with the naked eye could be visualized. Robert Hooke in 1665, using an instrument with two sets of lenses (a crude compound microscope), was the first person to describe cells as life’s smallest structural units. In the early 1670s Anton van Leeuwenhoek used a simple magnifying lens to observe microbes he called ‘animalcules’ in rainwater, and was possibly the first person to observe microorganisms. The development of electron microscopes in the 1930s enabled magnifications of a further hundred times greater to be achieved.

A microscope can be defined as an optical instrument consisting of a lens or a combination of lenses for getting magnified images of minute objects. A simple microscope is essentially an ordinary magnifying lens held on an adjustable stand. It can give magnification up to 20 times the size of the object.

Abstract

In recent years microwave processing have attained increasing recognition in food industries particularly in drying and dehydration. During microwave processing, electromagnetic energy is supplied directly to the food material for volumetric heating. This provides rapid temperature rise throughout the material with reduced thermal gradients. This unique heating mechanism reduces processing time and saves energy. In-spite of advantages of microwave heating it leads to overheating in food material and formation of cold and hot spots if applied improperly during drying. To overcome these challenges different microwave assisted hybrid drying technologies have been developed by many researchers. These techniques are microwave assisted hot air drying, microwave assisted osmotic dehydration, microwave assisted vacuum drying, microwave- infrared assisted hot air drying, microwave assisted rotary drying. This chapter comprises the fundamentals of microwave and provides comprehensive update of microwave assisted hybrid drying processes for food and agricultural materials.

Abstract

Hot air circulation is the most common industrial method of drying foods which has its own inherited disadvantages. Microwave drying can be an alternative method for removing moisture from foods and there has been a surge of interest in the application of microwave to process the foods, in past few years. The reason being that there is worldwide energy crisis and the growing acceptance and familiarity with domestic microwave ovens. It is well known that conventional means of heat processing irreversibly alter the flavor, colour, and texture of many foods. From the point of flavor alone, it is desirable to improve our present methods of processing foods. Some improvements have been made in this direction with a number of food products by use of high-temperature short- time processing.

5.1 Introduction

Waste from the dairy processing industry is generated through production of milk products at different stages. With diversification of dairy products, by-products have also gained some importance. Utilization of dairy by- products improves economical and nutritional aspects of milk production and reduces environmental pollution originating from dairy waste. Important dairy by-products include butter milk, ghee residues and whey, the major waste arising from production of cheese, casein, paneer and chhana. Whey arises as a result of protein coagulation/precipitation in the preparation of these products. It is used for manufacture of whey powder, whey drinks and lactose (milk sugar). Whey protein concentrates can be prepared by modern technological methods like ultra-filtration and reverse osmosis. Desi buttermilk is an important domestic beverage since olden days. Ghee residue can be utilized for manufacture of chocolate burfi, samosa filling etc. Hence, utilization of dairy waste particularly whey, butter milk and ghee residues obtained during manufacturing of various main products, has not only increased the availability of nutritional milk foods but has also indicated the profitable method of by products utilization and helped in minimizing the problems of pollution. This chapter focuses on utilization of these dairy industry wastes.

    1.    As per FSSAI, 2011 regulations, what is the fat and SNF content in buffalo milk
        a)    5 & 9    b)    6 & 8
        c)    6 & 9    d)    None
    2.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  cow milk
        a)    4 & 9    b)    4 & 8.5
        c)    6 & 9    d)    None
    3.    As per FSSAI, 2011 regulations, what is the fat and SNF content in  standardized milk
        a)    4 & 9    b)    4.5 & 8.5
        c)    6 & 9    d)    None

Importance

The dairy products, which have originated in India, are called indigenous dairy products. The products can be broadly classified in to khoa based and channa based. The importance of the dairy products were known to Indians since time immemorial or it could be roughly estimated to be around five thousand years ago and the development could be considered as an art.

1. Ethyl alcohol content in alcoholic beverages is determined by Pyknometer Method or SG (Hydrometer) Method (after distillation). %Alcohol (v/v) = 8610.6 – (16584 x SG) + (7973.3 x SG 2)
2. 1 ml of 0.05N NaOH is equivalent to 0.00375 g of tartaric acid.
3. Volatile acidity of alcohol drinks is measured in terms of as acetic acid. 1 ml. of 0.05N NaOH is equivalent to 0.003g of acetic acid.
4. Esters in alcohol drinks is expressed as ethyl acetate gms. per 100 liters of abs. alcohol. 1 ml. of 0.1N NaOH is equivalent to 0.0088g of Ethyl acetate.
5. Esters in Higher alcohol drinks is expressed as Amyl alcohol gms. per 100 liters of abs. alcohol.1 ml of 0.1N NaOH is equivalent to 0.0088g of Amyl alcohol.
6. The concentration of Higher alcohol g/100L is determined by spectrophotometer method using p-dimethylaminobenzaldehyde solution by reading the % T or Absorbance (OD) of developed colour of samples and series of standards in spectrophotometer at 530/535 nm against reagent blank as reference.

Milk is the one food for which there seems to be no adequate substitute. It constitutes almost the entire diet for the young of all mammals. Each species produces milk that is especially adapted to the growth of its own young, but milk from one species may be used as food for others. Since animals were domesticated centuries ago, the milk from various species such as cow, buffalo, goat and camel, has been used in the diets of people throughout the world. Only cows milk is of commercial importance in the United States, although small amounts of goat’s milk are sold.

Whole cow’s milk is approximately 88 percent water, 5 percent carbohydrate, 3.5 percent protein and 3.3 percent fat. Its nutrient content varies from species to species, from breed to breed, seasonally and even from the beginning of the milking to the end of the process. In the United States it is cow’s milk that is used commonly as a beverage and in food preparation. Therefore the milk discussed throughout this chapter is cow’s milk.

Abstract

Vitamin D or “sunshine vitamin” is an essential fat soluble vitamin required for healthy bones. It is responsible for enhancing intestinal absorption of calcium and phosphate. Its deficiency leads to osteoporosis and osteomalacia in adults and rickets and other bone deformities in children. Vitamin D deficiency is being reported to be quite common these days due to modernization accompanied with changes in lifestyle and environmental pollution which limit sun exposure for several individuals. Inadequate sun exposure results in reduced vitamin D synthesis and ultimately poor vitamin D status necessitating compensation through dietary intake. Dietary vitamin D intake is very low in India because of low consumption of vitamin D rich foods, absence of fortification and little use of supplements. It is becoming a major public health problem, needing immediate attention. Fortification of milk and milk products is the safe and effective approach to deal with widespread vitamin D deficiency as milk is consumed and liked equally by all age groups. This paper highlights the importance, sources, recommended allowances and other relevant issues related to vitamin D fortification and its health effects.

10.1 Introduction

Milk is a unique substance in that it is both consumed, as fluid milk with minimal processing and it is the raw material used to manufacture a wide variety of products. From the nutrition point of view, milk is an almost ideal food and considered to be perfect food. The human body needs more than thirty distinct materials in its food supply. No single food stuff supplies all of them but milk supplies nearly all. Since milk by its nature is perishable and an ideal product for bacterial growth, so it must be carefully handled, both during production and while processing. This chapter focuses on the technological (processing) aspects of the transformation of milk into its various consumer products, including beverages, fermented products, concentrated and dried products, butter and ice cream.

10.1. Preservation through canning

• Process of sealing food stuffs hermetically in containers and sterilizing them by heat for long storage

• In 1804, Appert in France invented this process.

• Also known as appertizing.

• Saddington in England - First to describe a method of canning of foods in 1807.

• In 1810, Peter Durand obtained first British Patent on canning of foods in tin containers.

• In 1817, William Underwood introduced canning of fruits on commercial scale in U.S.A.

• Fruits and vegetables are canned in season when raw material is available in surplus.

• Canned products are sold in off season for better returns to grower.

10.1.1. Principles and process of canning

INTRODUCTION

Fruits and vegetables are historically important constituents of human diet and the growing awareness of consumers about the beneficial effects of these commodities could result in enhancement of global trade involving fresh and processed fruits and vegetables. Emergence of postharvest handling of fresh fruits and vegetables facilitated global trade of these commodities. The developed countries started realizing the export potential of these commodities by development of adequate value addition in terms of pretreatments, shelf life extension and packaging besides grading and other associated packing house operations. However, the trade concerning fresh fruits and vegetables could never come out completely from problems related to pesticidal residues, spoilage, bulkiness of the commodities involving transportation of inedible portions and excessive packaging costs arising out of bulkiness. The other problems associated with fresh produce include mandatory requirement of specific storage temperatures with refrigeration as the primary means of regulation of metabolic rate.

Minimally processed fruits and vegetables are products that have the attributes of convenience and fresh like quality. Their forms vary widely, depending on nature of unprocessed commodity and how it is normally consumed. In many cases, minimally processed product is raw and cells of tissues are alive, but these characteristics are  not regarded as essential. It is important that products have fresh-like character, regardless of   state of cells.  Minimally processed products for both retail and food service applications have increasingly appeared in market place recently.  In coming years, it is commonly perceived that this industry will have unprecedented growth.

1. INTRODUCTION

In recent years, fruit and vegetable consumption has grown rapidly. Today’s society is characterized by an increasing health consciousness and growing interest in the role of food for maintaining and improving human well-being and consumer health. Due to consumer’s profile being ‘‘rich in cash/poor in time’’, there is a demand for ready-to-eat products As a result of changes in consumer attitudes, the market of minimally processed (MP) fruits and vegetables has grown rapidly. In addition to their nutritional and sensory properties, foods are currently recognized as active and protective agents. Among the others, minimally processed products stand out as convenient novel foods that fit the many needs of a modern lifestyle as they combine technical content with an innovative food concept. Fresh fruits and vegetables are an essential component of a healthy diet, able to decrease the risk of cardiovascular diseases and cancer. Their consumption has continued to grow rapidly, linked to the increased public awareness of their health benefits.

Minimal Processing’ (MP) is a concept describing approaches to food safety and preservation that are designed to retain the natural and as-fresh properties of foods. Minimally processed fruits are new forms of product marketing, intended to meet the consumers’ desires for convenience and fresh-like quality. Minimally processed fruits and vegetables, also called ready-to-use, fresh-cut or pre-cut produce, are raw fruits and vegetables that have been washed, peeled, sliced, chopped or shredded into 100% usable product that is bagged or packaged to offer to the consumers high nutrition, convenience, and flavour while still maintaining its freshness.

Introduction

In this modern era, educated and health-conscious people are increasingly demanding such food products that preserve their nutritional value, retain a natural and fresh colour, flavour and texture, and free from chemical preservatives. Besides, urbanization has extensively affected the life-style of people all over the world. Competition has made their life extremely busy and time has become a very important factor. Hence, recently there has been increase in demand for ready-to-cook or ready-to-use fresh food products of fruits and vegetables along with convenience and safety. This new demand by consumers has opened a new avenue of food preservation known as minimal processing. The products prepared by this processing method are known as fresh cut or pre-pared products. Minimally processed products are also known as lightly processed, partially processed, fresh processed, fresh cut, and pre prepared. It can be defined in many ways for example as "least possible treatment to achieve a purpose". A more specific definition is as the method that "preserve foods but also retain to a greater extent their nutritional quality and sensory characteristics by reducing the reliance on heat as the main preservative action. In a broader way it can also be defined as the processed foods have been slightly altered for the main purpose of preservation but which does not substantially change the nutritional content of the food. Generally minimal processing involves cleaning, washing, trimming, coring, slicing, shredding before packaging and storage at specific temperature. Some of the examples of minimally processed fruits and vegetables include sliced mango cheeks/melons/papaya/apple, pieces of pomelo segments, peeled and cored pineapple, chilled peach, pomegranate arils dressing, shredded lettuce, shelled peas, cauliflower florets, peeled sliced potatoes, diced onion etc. Minimally processed products are important to food service industry such as eateries and catering companies as they offer many advantages over traditional products, with respect to convenience, expense, labor, and hygiene. Even if it is very much liked by people, the production of minimal processed products is limited due to rapid deterioration and short shelf life. Whereas most food processing methods stabilize the products and prolong their shelf-life, minimal processing of fruits and vegetables increases their perishability.

Minimal processing of fruits and vegetables
The technological development and modernization during recent years have resulted in in organisation coupled with Lifestyle modification and changes in dietary habits. This development and Organisation have made it easier to meet the requirement of processed food. Processing of fruits and vegetables effects shelf life providing ready to eat food with similarities to fresh product. Before the food Industries shoulder a bigger responsibility of utilising a novel technology to produce safe food without detrimental effects on quality. The industries need to who built biological (enzymatic / fomentation and biopreservation and Engineering solutions like non-thermal high-pressure treatment, cook chill, microencapsulation, vacuum impregnation etc. For the adoption of de - constructive culinary techniques such as 3D food printing and Molecular gastronomy as well as developments in nutrigenomics and digital technologies may facilitate novel product format, personalization, and access to niche market. Concretely, e - operating movement from Naresh mint to health improvement in present conditions demand or shift from defensive market oriented offensive market developing strategies including collaborative networks with Research Organization.
It is also defined as any fruit and vegetable that has been subjected to different processing steps (e.g. peeling, trimming, cutting, washing, disinfection rinsing etc.).

EXPERIMENT: MINIMAL PROCESSING OF CAULIFLOWER (FREEZING PRESERVATION AND STEEPING PRESERVATION)

Materials and reagents

Material : Fresh cauliflower, glass jars, polythene pouches

Reagents: 15% sodium chloride

Tamarind (Tamarindus Indica)

Introduction

The fruit of tamarind a pod 5 to 15 cm long, 3 to 10 seeds surrounded with edible pulp which is principal souring agent for sauces, chutney, in beverages and in general cooking. Pulp is carminative, laxative, given as infusion in biliousness and febrile conditions. It is also used in dyring and tanning and for polishing and cleaning metal ware. The tartaric acid is extracted from unripe fruits. The polysaccharide (jellose) is extracted from seeds, which is used as a sizing material in the cotton and jute industries. Besides, polyose obtained from the seed is good substitute for fruit pectin in the preparation of jam, jelly or marmalade. The bark and leaves are used for tanning. Tamarind balls are prepared after taking out seeds from the fruit. Tamarind paste and tamarind juice concentrate are the other commercial products.

The fruits, flattish, bean-like, irregulary curved and bulged pods, are born in great abundance along the new branches and usually vary from 2 to 7 in long and from 3/4 to 1 1/4 in (2-3.2 cm) in diameter. Exceptionally large tamarinds have been found on individual trees. The pods may be cinnamon-brown or grayish-brown externally and, at first, are tender-skinned with green, highly acid flesh and soft, whitish, under-developed seeds. As they mature, the pods fill out somewhat and the juicy, acidulous pulp turns brown or reddish-brown.

7.1. Origin and distribution

• Originated in the Mediterranean basin and spread to rest of world by both natural and artificial means.

• USA - major producer of pepper mint and spear mint

• Bergamot mint - native of Europe and naturalized in eastern USA

• Grows successfully in temperate and subtropical region of India.

• India - Japanese mint - Terai region, extending to parts of Indo Gangetic plains and parts of Punjab in North-Western India.

7.2. Economic importance

7.2.1. Japanese mint or corn mint or field mint (M. arvensis), 2n: 36, 72.

New Technique of Food Preservation

1. High Pressure Processing (HPP)

High Pressure Processing (HPP) is a method of food processing where food is subjected to elevated pressures (up to 87,000 pounds per square inch or approximately 6,000 atmospheres), with or without the addition of heat, to achieve microbial inactivation or to alter the food attributes in order to achieve consumer-desired qualities. Pressure inactivates most vegetative bacteria at pressures above 60,000 pounds per square inch. HPP retains food quality, maintains natural freshness, and extends microbiological shelf life. The process is also known as high hydrostatic pressure processing (HHP) and ultra high-pressure processing (UHP).