eChapters

1. Introduction

Sundarbans is claimed to be one of the wonders of the world for its natural resources of halophytic mangrove forest (some 34 species of true mangroves are present), biodiversity and ecosystem that form an extraordinary environment of the globe. Available brackish water environment of Sundarbans provides favourable substratum for algal communities (Naskar and Naskar, 2010). Enteromorpha intestinalis specifically is one of the algal species that is very abundant in the Sundarban region. The production of total seaweeds in India in 2000 was approximately 600,000 tons (wet weight). India produces 110-132 tons of dry agar annually utilizing about 880-1100 tons of dry agarophytes. The seaweed industry in India is mainly a cottage industry and is based only on the natural stock of agar-yielding red seaweeds, such as Gelidiella acerosa and Gracilaria edulis, and algin yielding brown seaweeds species such as Sargassum and Tubineria (Kaladharan and Kaliaperumal, 1999).

Investigational studies indicate that marine algae contain significant amount of nutraceuticals, vitamins, proteins, carbohydrates, fiber and antioxidants. Composition indicates that there is a tremendous scope for food and pharmaceutical applications. These may be used for food fortification but after rigorous studies. Formulation, standarizaiton and characterization should be performed before human use. Studies for exploitation of the bioactive components of the species may open up new avenues. Hence there seems to be a full scope for the realization of outcomes of the research. Further the utilization of the developed processes at higher scales may reap in financial benefits and may prove beneficial to the local people, who are supplier of the raw materials. The present study is an attempt to utilize this India variety of macro-algae for fortification of bakery food products.

1. Introduction

Citrus is a common term and genus (Citrus) of flowering plants in the Rue family, Rutaceae. Citrus fruits are non-climacteric and respiration slowly declines and the production and release of ethylene is gradual. India ranks sixth in the production of citrus fruits in the world. Citrus wastes typically are about 45- 50% of the weight of citrus original and the percentage of waste to 30-50% for vegetables and fruits in general. Natural colour plays a significant role in determining the degree of consumer acceptance of the product. In addition, carotenoids (vitamin A precursor) have high nutritional values which are important for human nutrition.Francis and Isaksen (1988) stated that carotenoids play a very important role for extraction as for protection of health against cancer, cardiovascular and eye disease and as anti-oxidant. Carotenoids play important roles in human nutrition through their provitamin A activity, but also by acting as antioxidants, for prevention of age-related macular degeneration or skin protection against UV radiation. The antioxidant capacity of carotenoids was proved for pure compounds as well as for plant extracts and food. The main objective of this research work is extraction, determination and identification of natural colorants from different citrus wastes (citrus peel). Also to study the effects of pH and oxygen on the stability of extracted pigments and determination of the specific carriers for the extracted pigments using solid matrices (starch, dextrin, arabic gum and flour).

    
1.    Introduction
    
2.    Containers
    2.1     Materials used for forming containers
    2.2    Types of cans
    2.3    Labeling and coding
    2.4    Can seam
    
3.    Microbilogical Aspects
    3.1     Organisms associated with non acid foods
    3.2     Heat resistance of bacteria
    3.3     Logarithmic order of destruction
    3.4     Thermal death time curve
    3.5     Determination of TDT and survivor number
    3.6     F-value
    3.7    12 D concept
    
4.    Heat Penetration Aspects
    4.1    Factors that influence heat penetration
    4.2    Measurement of cold spot temperature
    
5.    Thermal Process Calculation
    5.1    General method
    5.2    Formula method
    
6    Inoculated Pack Studies

7.    Effect of Thermal Processing on Food Quality
    7.1    Cook value
    
8.    Steps of Canning Fish
        
    8.1    Handling raw material
    8.2    Dressing and size cutting
    8.3    Salt treatment
    8.4    Precooking
    8.5    Smoking
    8.6    Packing/ Filling
    8.7    Exhausting and seaming
    8.8     Retorting and cooling
    8.9    Inspection and storage

References

1.       Introduction

2.    Lipid Storage in Fish
    
3.      Factors Influencing Nature of Lipids in Fish
    
4.    Composition of Fish Oils
    4.1    Nature and composition of fatty acids
    4.2     Triacyl glycerols
    4.3     Phospholipids
    4.4     Diacyl glycerol ethers
    4.5     Wax esters
    4.6     Hydrocarbons
    4.7     Sterols
    
5.    Autoxidation of Fish Lipids
        
    5.1    Mechanism of autoxidation
        
    5.2     Factors influencing lipid autoxidation
        
    5.3     Control and prevention of autoxidation
    
6.    Lipid Autolysis
    
7.    Rancidity Problem in Fish
    7.1     Indices of oxidative rancidity
    
References

1.    Introduction
    
2.    Structure of Protein
    2.1     Primary structure
    2.2     Secondary structure
    2.3     Turns and Bends in the Polypeptide Backbone
    2.4     Tertiary structure
    2.5     Quaternary structure
    
3.    Protein Denaturation
    
4.    Conditions Affecting Protein Structure
    
5.    Fish Proteins
    5.1    Sarcoplasmic proteins
    5.2    Myofbrillar protein
    5.3    Stroma proteins
    5.4    Functional properties of fish proteins
    
References
    
Further reading

1. Introduction

Okara is a by-product generated during processing soybean into soymilk or tofu. Okara is rich in fibre and protein. It contains most of the carbohydrates, some of the protein and a small portion of the oil from soybeans. Okara contains approximately 50% fibre, 27% protein, and 10% fat on dry basis (Li et al., 2012). About 1. 2 kg of fresh okara is produced from every kilogram of soybean processed for soymilk (Vishwanathan et al., 2011). Fresh okara from soymilk production has about 80% moisture. The protein present in okara has good nutritional quality and superior protein efficiency ratio. Other soy components that are also likely present in okara include isoflavones (genistein and daidzein), lignans, phytosterols, coumestans, saponins, and phytates (Li et al., 2012). The most common method of utilization of okara is in the form of animal feed. Tofu or soymilk processing plants primarily dump okara as landfill or resort to burning. Okara can be utilized as a fertilizer as it contains various nutrients required for growth of plants. It can be used as a fermentation substrate for production of ethanol. Okara can also be used in pet foods as it contains high levels of extenders and protein. Apart from these, okara can be used in a variety of food products. It can be used in various food products. Utilization of okara is still in the initial stage. It can be used as a replacement of wheat flour in baked products. It can also be used in various soups, salads or vegetable preparations.

Resistant starch refers to the portion of starch and starch products that resist digestion as they pass through the gastrointestinal tract. Resistant starch is the fraction of starch which is not hydrolysed to D-glucose in the small intestine within 120 min of being consumed, but which is fermented in the colon. It can be used as a functional ingredient in various food formulations (Fuentes-Zaragoza et al., 2010). RS has desirable physicochemical properties (Fausto et al., 1997) such as swelling, viscosity increase, gel formation and water-binding capacity, making it useful in a variety of foods. It helps in improving the appearance, texture, and mouthfeel of the final product compared to conventional fibres. Resistant starch can act as a prebiotic for gut microflora (Sajilata et al., 2006). It has hypocholesterolemic effects, is hypoglycaemic and prevents gall stone formation.

1.    Introduction
    
2.    The Scenario in India
    
3.    The Concept of Hygiene in Indian Food Industry
    
4.    Food Safety- The Reality
    4.1      Food import inspection and certification
    4.2     Laboratories for export certification
    4.3      Food export inspection & certification
    
5.    What is HACCP? & What is in Practice?
    
6.    Where We Stand?

7.    Success of Application of Food Safety Management System
    7.1.    Pre-requisites for HACCP
    
8.    Logical Steps of HACCP
    8.1      Assemble HACCP team
    8.2     Describe product
    8.3     Identify intended use
    8.4     Construct flow diagram
    8.5     On site confirmation of flow diagram
    8.6     Principles of HACCP
    
9.    Conclusion
    
References
    
Further References

Index
    
About the Editors

Introduction

Fresh fruits and vegetables are known for their nutritional and relishing nature. But, their fast perishability and season wise availability make them unavailable for a longer time. To enjoy and get benefited from their unique taste and nutritional value they are further preserved or converted into some value-added products such as jam, jelly, candies, juices, minimally processed fresh-cut fruits and vegetables, pickles etc. There are techniques which are developed to preserve them while in fresh and also when they are made into value-added products. Some require only one technique and other requires more than one in combination so that the product can be preserved for a longer period and available to maximum population even after their period of production/availability is completed.

1.    Introduction
    
2.    Bacteria of Public Health Significance in Fish Handling
    
3.    Sanitary and Hygienic Precautions to be Followed in Fish Handling
    3.1    Requirements for the fishing vessels
    
4.    Requirements for the Landing Sites/Auction Centres
    
5.    Requirements for the Processing Centres
    5.1     Use only potable water or clean sea water for washing fish
    5.2     Never put fish on sand or any unclean surface
    5.3     Lighting and ventilation
    5.4     Water supply
    5.5     Ice
    5.6     Utensils for fish handling
    5.7     Washing of utensils and fish contact surfaces
    5.8     Workers’ hygiene and health
    5.9     Rodent control measures
    5.10     Fly control measures
    5.11     Waste disposal
    5.12     Storage of toxic substances
    5.13     Toilet facilities
    
Acknowledgement
    
References

1. Introduction

With increase in consumer awareness and lifestyle the interest for health promoting natural food ingredients has expanded in recent years. However, globally it has become a great challenge to the manufacturers to ensure that such compounds should remain in their active form during processing and storage with an emphasis to its bioavailability profile. Oxidative stress is the major contributor to the pathogenesis of a number of chronic and degenerative diseases including atherosclerosis, Alzheimer’s and Parkinson’s disease, diabetes, DNA damage, carcinogenesis, cardiovascular and neuro degenerative diseases, allergies, premature ageing etc. (Gupta et al. , 2014; Svetli et al. , 2010). Endogenous antioxidant defense mechanisms are not always sufficient to fully scavenge the free radicals formed in the body during various processes. Therefore, dietary components having antioxidant properties, such as tea flavonoids, are very much necessary to supplement the activity of endogenous antioxidants. Tea is one of the most concentrated sources of flavonoids and phenolic acids which show antioxidant activity by sequestering metal ions and by scavenging reactive oxygen and nitrogen species (Frei & Higdon, 2003).

11.1    Maturity Indices
    
11.2    Harvesting and Field Handling
    
11.3    Packhouse Operations
    
11.4    Packaging
    
11.5    Precooling

Bananas and plantains constitute the fourth most important global food commodity (after rice, wheat and maize). They are cultivated in over 120 countries in the tropical and subtropical regions of the world in an area of  approximately 100 million hectares, where they constitute a major staple food crop for millions of people, as well as providing a valued source of income through local and international trade.
 
Banana is one of the oldest fruit crops of India, finding its reference even in epics like Ramayana. India is  believed to be one of centres of  origin, besides southeast Asian countries like Burma, Thailand, Malaysia and Indonesia. It is a crop having multifarious uses as every part of the plant is utilized and hence aptly  called as ‘Kalpatharu’ the plant of virtues. It is important internationally from the point of view of  trade as well as livelihood security.

Abstract

The irradiation process involves exposing the food, either prepackaged or in bulk, to a predetermined level of ionization radiation. In this process, it is important to know sources of ionization radiation, how energy is quantified, and its scope with advantages and limitations.The traditional methods like preservation, such as drying, smoking and salting have been supplemented with pasteurisation (by heat), canning (commercial sterilisation by heat), refrigeration, freezing and chemical preservatives. ‘Food irradiation’ is another technology that can be added to the list. By realizing its importance present chapter highlighted with some basic aspects as well as its applications and other related aspects of food irradiation. Food irradiation involves basic principles like; Pasteurization (Pathogen Reduction) 2. Sterilization 3. Sanitation 4. Disinfestation. As concern to dosage can be applied as  low, medium and high based on type of radiation, type of food, type of packaging material and time of application. It has broader range of application in preservation with this also has few limitations which have become bottlenecks in this technology. Though technology is employing much in developed countries rather than developing once. Prospectus should be given in those countries also.

1. Introduction

Osmotic dehydration is a useful treatment of dehydration compared to the other dehydration processes, as other dehydration processes bring adverse and irreversible changes in physical and nutritional status of food material. Recently in many studies it was found out that since plant membranes are semi-permeable in nature, not only moisture but transfer of solute from osmotic solution to the food material also takes place. Another kind of transfer which was also noticed is the leaching of micronutrients from the cells of food to the osmotic solution, but the amount being very low, this transfer can be neglected. (Mayor et al., 2006). The mass transfer kinetics was studied for different food materials (Hawkes and Flink, 1978). Effect of different variables such as pressure and temperature were also studied (Rastogi and Niranjan, 1998). The effective diffusivities for both water loss and solute gain can be calculated by using various methods which gives the rate of diffusion of solute and moisture for the food material. The finding of solute gain and leaching of micronutrients pointed the requirement of maintaining the osmotic dehydration process, which could be done by maintaining the process variables of osmotic dehydration. Impact of various process variables on osmotic dehydration and their best levels at which maximum water loss and minimum solute gain could be obtained had to be calculated out. For this purpose, optimization of process variables through response surface methodology (RSM) could be best utilized (Uddin et al. , 2004). RSM is a statistical tool which gives the random combinations of input variables to give the best output result as required. Various works have been done on optimization of process conditions of osmotic dehydration taking different samples of foods. In this study, bamboo shoot species (Bambusa balcooa) was taken as sample for osmotic dehydration to optimize the process variables for osmotic dehydration of bamboo shoots using salt as osmotic agent followed by calculation of effective diffusivity of water and solute during osmotic dehydration of bamboo shoot.

1     Introduction

2     Bacterial Flora on Fish

3     Products of Bacterial Activity

4      Bacterial Flora of Fish Caught from Different Waters

5      Fish Spoilage and Bacterial Flora

6      Bacterial Contaminations
    
7      Bacterial Contamination of Harvested Fish
    
8      Growth of Spoilage Bacteria
    
9      Scombroid Poisoning
    
10      Microorganisms on Iced Fish
    10.1     Crustaceans
    10.2     Molluscs
    
References

By definition, minimal processing would encompass any procedure, short of traditional complete preservation procedures (heat sterilization etc.) that adds value to the fruit or vegetables (Floros, 1993). Other terms used to refer minimally processed products are lightly processed, partially processed, fresh processed, fresh cut and prepared. Minimally processed fruits and vegetables are products those have the attributes of ‘fresh-like’ quality. A number of minimally processed products of fruits and vegetables are now being produced like peeled and sliced potatoes, shredded lettuce and cabbage, washed and trimmed spinach, chilled peach, mango, banana, melon and other fruit slices, vegetable snacks such as carrot and celery stick  and cauliflower and broccoli florets, packaged mixed salads, cleaned and diced onion, peeled and cored pineapple, fresh sauces, peeled citrus fruits and microwaveable fresh vegetable trays. Minimal processing of fruits and vegetables has two purposes. First, it is important to keep the product fresh but convenient without losing its nutritional quality. Second, the product should have a shelf life sufficient enough to facilitate distribution within the region of consumption. The microbiological, sensory and nutritional shelf life of minimally processed fruits and vegetables should be at least 4-7 days but preferably even longer (Ahvenainen, 2000).

1. Introduction

Cherry peppers (Capsicum frutensis var. cerasiforme) which is locally known as dallae khorsani, is one of the important cash crops of Sikkim and Darjeeling hills. They are small, round shaped, fleshy and heavily seeded. They are green in color in early stage of fruiting and turn red when fully matured. It is an excellent source of vitamin A and C, which are important antioxidants (Howard et al., 1994). Cherry peppers are an ideal size for pickling or brining. Its hotness ranges from moderately mild to very high.

Due to its high moisture content (about 85% w. b. ), shelf life of cherry pepper is limited to 7 - 10 days. This makes it rare and costly during the off season. Hence, preservation of cherry peppers is of considerable importance both to the farmers as well as to the consumers. Drying is one of the oldest methods for preservation of cherry peppers to make it available throughout the year. To increase shelf life of chilies, drying up to 10 % moisture content (dry basis) is required which is accepted in export market.

For drying chillies, sun and hot air drying are the most common drying method used. However, due to the prolonged drying time of 16-48 h, the quality of the dried chillies is reduced (Kim et al., 2002). Many researchers paid more attention to innovative techniques such as short and medium-wave infrared radiation drying (SMIR) which not only maintain product quality, but also increase the drying rate. Moreover, infrared drying could save up 50% energy compared to convective drying (Nowak & Lewicki, 2004). The ability of infrared radiation to penetrate and heat the inner layers results in higher rate of heat and mass transfer (Ginzburg, 1969).

1. Introduction

King chilli belongs to the genus Capsicum and species chinense, which is world famous for its heat content. King chilli measures 60 to 85 mm (2. 4 to 3. 3 inches) long and 25 to 30 mm (1. 0 to 1. 2 inches) wide with a red, yellow, orange, or chocolate color. The plant came into limelight when it was announced as the hottest chilli in the world in 2006 (Baruah et al., 2014). The people of the North-eastern India use the fruits of King chilli in different food formulations like flavouring curries due to its high-quality fragrance and pungency and also for various medicinal treatments like rheumatism, arthritis, gastritis, ankylosing spondylitis, digestive diseases (Sarwa et al., 2012) and to reduce chronic congestion (Raktim and Changkija, 2009). It is also used as a bird, animal and insect repellent as well as a biochemical pesticide. The extremely hot or burning sensation of chilli is due to the presence of capsaicinoids found only in Capsicum (Hoffman et al., 1983).

In northeastern India, King chilli has been cultivated in a traditional manner since time immemorial and there exists a considerable amount of genetic variability among the landraces (Raktim and Changkija, 2009). The pharmaceutical applications of capsaicinoids are attributed to their analgesic, antiarthritic, anticancer and antioxidant properties. In fact, capsaicin has been at the centre of intense research for elucidating the basis of its pharmacological properties and exploiting the therapeutic potential (Prasad et al., 2005). It has also been reported that capsaicin inhibits the growth of prostate cancer cells (Mori et al., 2006). The antioxidative capacity of chilli is higher than ginger, garlic, mint and onion (Shobana et al., 2000), which may play an important role in the process of chemoprevention (Yu et al., 2002).

6.1    Phytochemicals
    
6.2    Health Benefits  and Therapeutic Properties of Banana
    
6.3    Validation of Health and Therapeutic Claims

2.1    Origin
    
2.2    Production
    
2.3    Distribution

2.4    World Scenario