eChapters

Wafer: A thin crisp cake, candy, cracker or chips is known as wafer.

Waffle: A crisp cake of batter baked in a waffle iron is called waffle

Warner-Bartzler Shear: It is one of the oldest but commonly used devices used to measure the tenderness of meat. It is used to test the quality in the cooked meat (Plate 648).

Wastage: Wastage is a term that cannot be precisely defined by even moral value / judgment and defined on the context / situation on which it is used.

Waste water: Water that has been used in a manufacturing process and goes waste is called waste water.

Water: Water (H2 O) is a clear transparent, colourless, odourless and tasteless liquid; neutral in reaction; boils at 100oC, freezes at 0oC and has maximum density (1 g/cm3) at 4oC. It exists as snow, ponds, lake, rivers, seas, oceans etc., also occur as rain and is there in the form of moisture in atmosphere. Pure water is bad conductor of heat and electricity. Water is an essential part of the body structure as a carrier of nutrients and regulator of a number of body functions. Fruit and vegetables contain > 80% water and sometime upto 95% water e.g. cucumber, lettuce, marrow, lettuce, melon. The starchy tubers and seeds, for example yam, cassava and cork, contain less water, but even > 50%. So water content must be optimum at the harvesting time. The human body comprises of about 65 % water, while that of fruits and vegetables 80-90% water.

Warehousing is a critical national strategy for conserving food grains. The proper storage and maintenance of notified commodities, primarily food grains, alongside safeguarding them from adverse weather, rodents, and natural decay, are vital for fostering the growth and development of the agricultural sector.
Post-harvest losses contribute to approximately 10% of total food grains, primarily due to improper storage methods, insects, rodents, microorganisms, and birds. The Punjab State Warehousing Corporation (PSWC) takes on the responsibility of storing, handling, and warehousing notified commodities, including agricultural produce, industrial raw materials, finished goods, and various perishable and hygroscopic items. PSWC provides scientifically designed warehouses that protect both the quality and quantity of stored goods, aided by trained personnel.
At PSWC warehouses, stored products are safeguarded from rodents, pests, and moisture, ensuring their preservation. The provision of scientifically managed storage facilities for food grains, from procurement to distribution, is a vital function carried out by PSWC. PSWC has made significant strides in creating warehousing facilities throughout the state, constructing numerous warehouses in key rural and urban areas.
Rail-side warehousing facilities have also been established, offering costeffective and efficient storage solutions under a unified approach. Additionally, PSWC helps prevent distress sales, enabling producers to hold their products until favorable market conditions arise, thereby securing the best possible value for their goods.
Horizontal sheds are commonly used to offer low-cost, large-volume storage, and the Food Corporation of India (FCI) has also built very large sheds for storing grains and other products. These sheds typically feature steel or corrugated sheet

1. Introduction
All glassware used for bacteriological work must be meticulously cleaned and sterilized. Used and soiled glassware should be thoroughly washed to remove dirt and solid residues before drying and undergoing sterilization.
2. Cleaning of New Glassware
Borosilicate glass (e.g., Pyrex) and factory-washed soda glass require only standard washing before use. However, new, unwashed soda glass needs additional treatment to neutralize alkali content.
• Place the items (e.g., test tubes, Petri dishes, and flasks) in a suitable container, cover with a 1% tri-sodium phosphate solution, and bring to a boil.
• Remove the items, rinse with tap water, and immerse them in a 1% hydrochloric acid solution to neutralize alkalinity.
• Rinse thoroughly with tap water, followed by distilled water. Allow the glassware to dry before sterilization.
3. Cleaning of Used Glassware and Other Apparatus
• Autoclave all glassware contaminated by microorganisms (121°C for 15–20 minutes). This liquefies solid media, facilitating removal.
• Rinse the empty glassware with tap water, then warm water (50–55°C).
• Soak in a detergent solution (e.g., 1% washing soda or tri-sodium phosphate solution) and scrub with a brush.
• Rinse thoroughly with tap water to remove detergent traces, followed by distilled water.

Waste is defined as anything that doesn’t add value to their operations. To the average person, waste is simply stuff that’s unwanted or useless. But from a scientific perspective, there’s really no such thing as waste. Nearly all the things we throw away can be transformed or processed in ways that make them useful again.

Waste comes in various forms, ranging from household trash to industrial byproducts. These include domestic waste, factory waste, e-waste, construction waste, agricultural waste, and more. We can categorize waste into different types:

Solid waste: This includes organic materials like vegetable and kitchen waste, as well as general household waste.

E-waste: Discarded electronic devices such as computers, TVs, and music systems fall into this category.

Liquid waste: This comprises water used in various industries, as well as waste from tanneries, distilleries, and thermal power plants.

Plastic waste: Items like plastic bags, bottles, and containers make up this category.

Diverse categories of Food Products such as canning, preservation of fruits and vegetables, processing of poultry products, dairy goods and many more present different challenges for wastewater disposal and regular use of water. A significant source of environmental pollution is the dissipated water generated from food product development and other agricultural tasks. This waste is being considered the most strenuous and requires a high amount of capital to convert this waste into reusable waste and the main reason behind this is different nutritional components such as inorganic and organic carbon compounds, nitrogenous elements, suspended and dissolved solids, high amount of biochemical and chemical oxygen demands (BOD & COD).

Abstract

Pulses being nutritionally vital, is an important constituent of diet for a very large number of peoples. A part from being a relatively cheaper source of dietary protein, it is also an important source of calories, certain essential amino acid, minerals and vitamins. Post harvest scenario of pulse shows that 75 per cent of production was milled in pulses with as dehusked split i.e. dal. Traditionally green gram and black gram dal is dehulled manually after soaking in water. Present investigation was carried out to develop the wet type dehuller and study was carried out on water absorption characteristics of green gram and black gram. The result reveals that the dehulling efficiency of abrasion type mechanism was about 95 per cent and 92 per cent in case of shearing type mechanism. It has been observed that rate of water absorption was initially high and then gradually decreases i.e. 0.54 to 0.18 and 0.48 to 0.18 for black and green gram, respectively. 

    1.    Water activity (a_w) affects food chemistry and can be controlled by removal (dehydration or drying) or by chemically binding the water, reducing its activity. Water activity in foods ranges from 0.95 to 1.00 in fresh meats and vegetables to 0.20 in dried milk.

    2.    Water activity (a_w) may be defined in a number of ways, qualitatively, aw is a measure of unbound, free water in a system available to support biological and chemical reactions.

    3.    Water activity, not absolute water content, is what bacteria, enzymes, and chemical reactants encounter and is affected by at the micro environmental level in food materials.

    4.    Two foods with the same water content can have very different aw values depending upon the degree to which the water is free or otherwise bound to food constituents.

    5.    The term “water activity” is related to relative humidity. Relative humidity is defined as the ratio of the partial pressure of water vapour in the air to the vapour pressure of pure water at the same temperature.

    6.    Water activity or aw is a property of solutions and is the ratio of vapour pressure of the solution compared with the vapour pressure of pure water at the same temperature. Under equilibrium conditions water activity equals:

1. Natural Mineral Water- Food Safety & Standard Regulations - 2011 and IS 13428:2005 Reaff. 2009 requirements
2. Packaged Drinking Water other than Natural Mineral Water- Food Safety & Standard Regulations - 2011 and IS 14543:2004 Reaff. 2009 requirements
3. Water for processed Food Industry- IS 4251 : 1967 Reaff. 1992 requirements
4. Drinking water- IS 10500 : 2012

Introduction

Water is not only a vital environmental factor to all forms of life, but it has also a great role to play in socio-economic development of human population. Since antiquity humans have valued the importance of clean water and have used various techniques to improve its quality. In modern times, the safe drinking water became first a public health issue and then a human rights issue. The access to safe drinkin gwater now considered as a basic human right which is an essential component of effective policy for health protection. Improving access to safe drinking-water can result in tangible as well as intangible benefits to health. It has been shown that investments in water supply and sanitation can yield a net economic benefit, because the reductions in adverse health effects and healthcare costs outweigh the costs of undertaking the interventions (WHO, 2017). Past experiences have also proved that interventions in improving access to safe water favour the poor in particular, whether in rural or urban areas, and can be an effective part of poverty alleviation strategies. The disparity in water availability, reliability, and quality between the developed world and developing countries is enormous. Unfortunately, in many developing countries people lack access to safe water and therefore waterborne diseases are still a major cause of death, especially among children under age of 5. According to a joint report by World Health Organization (WHO) and United Nations International Children’s Emergency Fund (UNICEF) (WHO/UNICEF report 2017), around 2.1 billion people worldwide lack access to safe and readily available water at home, and around 4.5 billion, lack safely managed sanitation facilities. Moreover, many of these countries that have set drinking water standards often lack the resources to implement or enforce them.

Water is an essential component of all living things. Although once believed as a resource with a never-ending supply, it has now been understood that water is becoming increasingly scarce and therefore a proper management is necessary to keep a sustainable food production (Kannan & Anandhi, 2020). A continuous and safe supply of water is indispensable for the food industry where it has numerous applications along the agriculture and food production processes.

Abstract
India shares one fourth of global annual grain legume production and is also largest consumer of it. Weeds are the most severe and widespread biological constraint on agricultural production systems and cause damage to cropped and non-cropped lands. They reduce crop yield and degrade the quality of the produce, besides raising the cost of production. The grain legumesare commonly grown under rainfed/dry land conditions and hence do not receive the best management practices that are required for maximization of crop productivity. Among various production inputs, weed management was found to be the most important one contributing about 31% in pigeon pea, 110% in urdbean and 60 % in mungbean towards total productivity. Effective weed management in grain legumes is essential for optimizing
crop yield and quality. This process involves a multi-faceted approach that integrates cultural, mechanical, and chemical methods to address the challenges posed by diverse weed species and varying environmental conditions. Traditional single-method approaches often fall short due to the complexity and variability of weed problems like development of resistance in weeds. Therefore, an integrated weed management approach becomes effective, combining timely interventions with adaptive strategies to manage weed competition throughout the growing season. This approach not only enhances crop competitiveness and yield but also offers economic and environmental benefits by reducing reliance on broad-spectrum herbicides and promoting sustainable practices. Continuous monitoring and adjustment
of weed management strategies are crucial to effectively tackle evolving weed populations and changing conditions, ensuring long-term success in grain legume cultivation.
Keywords: Broad-spectrum herbicides, Crop productivity, Crop weed competition, Grain legume, Integrated weed management

Onion is highly vulnerable to weed competition because of its slow early growth, shallow roots, narrow upright leaves and limited canopy development. Weeds compete for light, water, nutrients and space while also harbouring pests and pathogens. Severe infestation during the critical competition period can cause substantial yield reduction. This chapter describes major onion weeds and evaluates cultural, physical, mechanical, biological and chemical control methods. Timely planting, suitable spacing, mulching, raised beds, manual weeding, mechanical tools, herbicides and biological agents are discussed. Integrated Weed Management is recommended as a smart approach combining complementary methods to improve weed control, protect soil health and sustain onion productivity.

Abstract
Legumes are an excellent group of fertility restorer crops which can be grown either as sole crop or as a component crop in the cropping system. As they are tolerant to drought condition, they can be grown throughout the year. The yield of legume crop is largely depending on pest, diseases and weeds. Among these weeds plays a major role as the weed seed bank inside the soil influence the weed population in the cropping season. Hence it is important to manage the weed seed bank for better productivity of legumes. Though legumes are short duration and fast growing crops, the germination percentage of weed seed bank will determine the final yield of legumes. There are many strategies to which the weed seed bank can be controlled to tolerable level before which the weed seed bank present in the soil has to estimate. Annual weed seed bank can be minimized by killing the weeds before they set seeds, harvest weeds, crop rotation, cover crops, inter cropping and ensiling. Weed seed bank depletion can be done by tillage, tricking the weed seeds, conditioning weed seeds, soil solarisation and herbicide application. Thus integrating various technologies may help in effective controlling of weed seeds to tolerable level thereby enhancing the yield of leguminous crops.
Keywords: Estimation of weed seed bank, legumes, tillage, yield, weed seed bank

When certain disease-causing bacteria or pathogens contaminate food, they can cause foodborne illness, often called “food poisoning”. Foods that are contaminated may not look, taste or smell any different from foods that are safe to eat. Salmonella, Campylobacter, Listeria and Escherichia coli are common bacteria causing foodborne illness. Some foodborne illnesses are mild where most people get better within a few days, but illness can sometimes be more severe and fatal. Bacillus cereus can form heat resistant spores. On cooking the food with these spores the heat resistant toxin is left at room temperature. Reheating or lightly cooking the food does not destroy these toxins. Most types of foodborne illnesses cause symptoms like nausea, vomiting, watery diarrhea, abdominal pain and cramps. Fever and/or the presence of blood or mucus in the stool are signs of bacterial infection that may require a medical consultation. Proper food handling is vital to prevent most foodborne illnesses and diseases. WHO has given keys towards safer food which should be followed. Unsafe food containing harmful bacteria, viruses, parasites or chemical substances, causes more than 200 diseases which range from diarrhoea to cancers. Foodborne and waterborne diarrhoeal diseases kill around 2 million people worldwide annually, including many children. A single foodborne bacterium can grow into more than two million bacteria in just seven hours under the right conditions. Foodborne pathogen called Listeria sp. can survive and sometimes grow on foods being stored in the refrigerator. Hepatitis A virus can cause long-lasting liver disease and spreads typically through raw or undercooked seafood or contaminated raw produce. It is estimated that more than 250 million people worldwide suffer food allergies. The boiling temperature (smoke point) of cooking oil is above 200 °C. The boiling point of water is 100 °C.

According to the World Health Day (WHO,2015) food contamination happens when food are corrupted with another substance. It can happen during the process of production, transportation, packaging, storage, sales and cooking process. The contamination can be physical, chemical and biological. Faulde et al., (2013) studied the infection caused to patients by mothfly

After the agricultural activities a number of by-products are obtained and these are known as agricultural waste. These include residues of different crops like stalks, straws, leaves, roots, husks and shells. The animal waste is in the form of manure. All these agricultural wastes are free of cost however; they can be utilized as an important resource (Lionel and Arnold, 1931). Agrawal (1998) has mentioned India as the final dumpyard. The wastes obtained from various resources can be converted into heat, steam, charcoal, methanol, ethanol, biofuel, compost, energy, biogas, construction and high valued chemical compounds. Many times these agri-industrial wastes are not completely utilized and either they rot in open areas or are burned in the fields.

It is a discipline of science that describes handling, preparation and storage of food that can prevent food-borne diseases. When there are two or more cases of a similar illness from the ingestion of the same common food it is known as a food-borne disease outbreak (FSN, 2018). In order to avoid potential health hazards, food safety is very important. This needs safety between industry, market and the consumer. For food safety the labelling on food material is vital. This includes the origin of food, steps taken for food hygiene, food additives, pesticide residues, policies on biotechnology, food guidelines for the management of governmental import, export inspection and certification systems for foods. The food should be safe in the market with safe preparation and delivery of the food for the consumer. Foegeding et al., (1996) have done an assessment of risk factors with food borne pathogens.Warnock et al., (2007) have reported intervention to food safety.

When pathogens are in the food they may be transmitted to the consumer. It may result in an illness or death of the person or other animals. The pathogens include bacteria, viruses, molds and fungus. These multiply in the food medium. Joon et al., (2012) have found pathogenic bacteria in meat products of Korea. The developed countries have high intricate standards for the preparation of food; however, in the developing countries there are less standards and enforcement of the standards which are followed. Apart from food another major source of infection is water, which is very critical in spreading many diseases. It is possible to prevent food poisoning if good water is used for all purposes. However, it becomes difficult as in the food supply chain a large number of persons are involved apart from the fact that pathogens can be introduced into foods no matter how much precautions are taken. Cowden (2000) has studied the notification on food poisoning to improve health. Frenkel et al., (2015) studied the amount of wastes from food processing industries.

A process control system that identifies the hazardous points in the food production process is known as HACCP (Hazard Analysis Critical Control Point). It puts into place many stringent actions to prevent any hazards from occurring. In any food process if there is strict monitoring and controlling steps, the chances for hazards are minimum. Today, HACCP is an integral part of modern food industry that identifies and controls the major food risks. These are like microbiological, chemical and physical contaminants. These can also be practiced at home scale by checking proper storage, handling, cooking and cleaning procedures. These steps have resulted in industries taking greater responsibility for and controlling the food safety risk factors. This helps in better consumer protection, agriculture, the food processing industries and promotes domestic and international food trade.

The temperature of food storage is important. Below 4⁰C the food pathogens do not grow. Above 60⁰C some colonies begin to die. However, almost all die at 71⁰C. How hot is the food served is important for food safety. The size of the piece is important to how quickly it will cook all the way through. The smaller the piece the faster it will cook. Large or thicker pieces take a longer time to be cooked. Otherwise cooking for a longer time is better so that pathogenic microorganisms do not grow. In case of a thicker piece the color must be checked inside to outside after cooking which should be consistent. If the meat has the bone, check the color/temperature closest to the bone in the thickest part. In case of meat the contamination usually gets introduced while butchering and the practices used. The street food on a cart is perhaps the most contaminated as it has some level of bacteria in it. The meat in the decorated malls also has pathogenic bacteria. The environment plays a very pivotal role which can recontaminate the food even after proper cooking. The amount of harmful pathogens keeps growing in number with the passage of time. Fresh from the grill is the best, an hour or two is not ideal, half a day or overnight could make a person sick. Due to the reason that consumers do not know the time and temperature of cooking it is important to eat food which is freshly prepared.

Introduction

Bread wheat (Triticum aestivum L.) is one of the most widely cultivated and consumed crops in the world. Wheat is perhaps best known for its different end-use baking properties as determined by grain texture, protein content and quality. Wheat is generally traded by and classified into “hard” and “soft” market classes on the basis of grain hardness or texture of the wheat kernel (caryopsis). Soft wheats have softer endosperm texture that fractures easily, therefore requiring less energy to mill, yields smaller particles, and has less starch damage after milling when compared to hard wheats. Hard and soft are used with slightly different connotations in different parts of the world. In Western Europe, hard is applied primarily to durum wheats and the soft applied to bread wheat. Elsewhere the term is applied to different cultivars within the species Triticum aestivum. In general, hard wheats are used for bread baking, while soft wheats are used for cookies and cake making. Hard wheat requires more force to crack the kernel, maintains a larger particle size, passes through sieves more easily and has more damaged starch MacRitchie (1980). Higher starch damage is required for good bread making quality Tipples et al. (1994) but is detrimental to the biscuit making quality.

Abstract

Wheat is unique among cereals because of its ability to form viscoelastic dough. Variety of products such as leavened and unleavened breads, pasta, cookies, and breakfast cereals are prepared using wheat. The viscoelastic property of dough is mainly due to the presence of gluten proteins viz., gliadins and glutenins. Variations among these proteins play a significant role in determining the quality of wheat. Although considerable studies have been carried out on quantity and quality of protein and their relation to bread quality, very little work has been reported on their relation with quality of Indian traditional products like chapati and tandoori roti. Results indicate that ratio between gliadins and glutenins are important in determining the chapati quality. It has been found that varieties having 5+10 HMW glutenin subunits with IBL/ IRS chromosomes are more suitable for the preparation of chapati and roti. This article is focused on the relation between protein and its subunit composition and the quality of chapatti and roti quality.

Introduction

Carbohydrates constitute nearly 80% of the total dry matter of wheat kernel. Starch is the predominant form, with cellulose, hemicellulose and pentosans present in lesser amount. Starch is present in discrete granules within the cells of the endosperm. Starch content is available in the range of 65% to 75% and generally related negatively to the protein content. Starch structure is a crucial determinant of many end-product uses of wheat. While the amylose /amylopectin ratio is a useful descriptor of starch structure, a more complete analysis of the population of the molecules which constitute a particular starch is considerably more revealing. The molecules range from the high degree of polymerization (10⁷ – 109 glucose units) and heavily branched amylopectin population, to the lower degree of polymerization (103 -106 glucose units), and infrequently branched amylopectin population. Starches with widely differing structures are suited to particular end uses. For example, starches with no amylose, the so called waxy starches are particularly suited to use as thickeners or gel forming agents because they form a clear stable gel with little retrogradation. In contrast, starch with high amylose content form hydrogen bonded insoluble aggregations which are suited to use in adhesives, plastics and as a source of dietary-fibre starch. The size and branching pattern of starch are also important determinants of the suitability of starches for particular end-uses due to the effects these parameters have on gelatinization temperature, starch swelling and viscosity.

1. INTRODUCTION

Wine is the alcoholic product obtained by fermentation of fruits like grape, plum, peach, pear, apple and apricot (see chapter 25). Different types of wine which can be made from various fruits are:

• Table wines
• Fortified wines
• Sparkling wines

In preparation of table, fortified and sparkling wine many steps are common. It is out of scope of this text to discuss these specialized wines. But the general steps involved to in wine making are described here.

Introduction

Wheat is an important cereal crop and is widely cultivated across the world. Wheat is consumed in different forms and major products are chapati, bread, biscuit, noodles and pasta products. Wheat has three groups of cultivated species namely bread, durum and dicoccum wheats. The common or bread wheats account for approximately 95% of world production. Nearly all of the remaining 5% cultivated varieties are durum wheats used for pasta products and couscous and dicoccums represent very little of the total wheat production. The bread wheat is divided into two broad classes based on grain texture; hard and soft. Hard wheats with high protein content and strong gluten are used for making bread and some noodles while soft wheats with lower protein content and weak gluten for biscuit, cakes and pretzels. Semi-hard wheats having some combinations of the above characteristics are utilized for making unleavened breads such as chapati, Asian steamed bread and some noodles. There can be large disparity within wheats of various classes; therefore to provide consistent quality, it is divided into grades. The grading is determined by the test weight, protein content, moisture and foreign material. The major wheat exporting countries have distinct grading patterns designed to provide wheat for specific purposes and consistent quality.

Xanthan gum: It is a polysaccharide that is produced by fermentation of carbohydrates by a gram-negative bacterium (Xanthomonas campestris) and is a thickening and suspending agent used in pharmaceuticals and prepared foods. It is also called xanthan. Xanthan is a stabilizer produced by Xanthomonas compestris (Plate 671). Xanthan is not hydrolysed or degraded by humans.

Xanthones: It is a group of yellow pigments e.g. mangiferin in mango,

Xanthophyll: Yellow hydroxyl carotene derivative which is present in all green leaves together with chlorophyll and carotene. Xanthophyll is a pigment containing O2 derived from carotene (Plate 672).

Xerophilous: An organism which is thriving in or tolerant to a xeric environment is called xerophilous.

Yabby: It is one of the burrowing Australian crayfishes (Cherax destructor) that are used for food.

Yakitori: A bite-size marinated pieces of beef, seafood, or chicken on skewers is called yakitori.

Yam: It is edible starchy tuberous root of plants (genus Dioscorea of the family Dioscoreaceae) used as a staple food in tropical areas (Plate 676).

Yautia: It is one of the aroid plants (Xanthosoma sagittifolium) chiefly of tropical America with starchy edible shaggy brown tubers that are cooked and eaten like yams or potatoes (Plate 677).

Yearling mutton: Meat obtained from 12-20 month aged sheep. It is also called Earling mutton.

Yeast: Unicellular plant body, very minute in size containing cell wall, cytoplasm with one or more vacuoles and a single nucleus, cause alcoholic fermentation (Plate 678). Yeast usually has little or no mycelium, and reproduces by budding. It results in production of yellowish surface froth or sediment that occurs in saccharine liquids (fruit juices) in which it promotes alcoholic fermentation, consists largely of cells of a fungus (as the saccharomyces, Saccharomyces cerevisiae), and is used in the making of alcoholic liquors and as a leaven in baking.

Yeasts

Yeasts are non filamentous, unicellular fungi that are typically spherical or oval. Like molds, yeasts are widely distributed in nature; they are frequently found as a white powdery coating on fruits and leaves.

Zeatin: Zeatin is a cytokinin C10 H13 N5 O first isolated from the endosperm of Indian corn.

Zeaxanthin: Zeaxanthin is an isomer of lutein occurring in fruits and vegetables (spinach and corn) (Plate 682, 683 and 684).

Zein: Zein is a protein from Indian corn that lacks lysine and tryptophan and is used in making textile fibers, plastics, printing inks, edible coatings, adhesives and sizes.

Zeolite: It is clay embedded in the plastic film to adsorb ethylene. It is used in Japan. Zeolite is anhydrous silicates that is analogous in composition to the feldspars and used in water softening, adsorbents and catalysts. Or Zeolite is one of various hydrous silicates that are analogous in composition to the feldspars, occur as secondary minerals in cavities of lavas, and can act as ion-exchangers. These are used especially in water softening and as adsorbents and catalysts (Plate 685).

Zero 2: It is Australian oxygen scavenging plastic packaging materials.