eChapters

8.1. Packaging

• One of the important steps in long and complicated j oumey from grower to consumer.

• Bags, crates, hampers, baskets, cartons, bulk bins, and palletized containers are convenient containers for handling, transporting, and marketing fresh produces.

8.2. Packaging points

• Recyclability / Biodegradability

• Variety

• Sales appeal

• Shelflife

• Containment

• Protection

• Identification

? To provide information on produce name, brand, size, grade, variety, net weight, count, grower, shipper, and country of origin.

? Universal Product Codes (UPC or bar codes) is included as part of labelling.

? UPC is used in food industry which consists of a ten digit machine readable code.

Introduction

Agriculture as a primary sector in India is mostly production oriented. Global agriculture is experiencing significant changes in terms of technological and digital revolution, rapid urbanization, faster growth in middle income groups, changing food habits, market oscillations, and above all, climate change. During the last 50 years, India has recorded 4 to 10-fold increase in agriculture and food production(food grains-290 MT, horticultural produce -315 MT, milk production nearly 180 MT, and fish production approaching 12 MT), rendering the country as the second largest agrarian economy in the world (Singh, 2019). Despite the excellent progress, the country is home to over one third of the world’s small and marginal farm holders, with scattered land holding. Eighty f ive percent of the farmers are small and marginal. On the other hand, world’s population is growing and to meet the growing food demand there is a need to increase agricultural output by at least 60 percent globally, and 100 percent in developing countries (FAO, 2014a)

Introduction

Agriculture sector is currently at the crossroads, which is evident in terms of higher nutritive food requirements juxtaposed with growing population. Food production faces multiple challenges due to frequent occurrence of natural calamities, sudden rise in temperature, increase in occurrence of disease and pests leading to both pre and postharvest crop loss. Alarming decrease in fertility status of high and medium land soils of Odisha due to formation of hard clay pan below 4-6” of soil depth has resulted in slowing down of nutrient mineralization by the soil microorganisms within the soil. Crop production stress is further aggravated due to steady decrease in availability of cultivable land with the advent of urbanization, which concurrently reduced the number of dedicated agricultural households. It has been estimated that production of all food grains and horticultural crops needs to be doubled at farmer’s level in order to feed the growing population of the world failing which there will be food crisis by2050.

The term ‘gender’ was first used by Ann Oakley and others in 1970s to describe the characteristics of men and women which are socially determined in contrast to biological differences. The term ‘gender’ further explains, a neutral term meaning, either men or women or both are in a particular context. The goal is to improve the status of disadvantaged class and get rid of socially created and approved discriminations. The green revolution in India changed the face of agriculture but apparently it contributed to two general trends (FAO, 1996) where wealthy have benefited more from technological change in agriculture than the less well off and secondly men have benefited more than women. In general, it is true that the priorities are set by men and some women, who are unaware of gender issues, and that these are seldom considered unless the research is sociological. But even social research can be totally gender blind.

Introduction

For capacity building of farming community, training plays a vital role. It helps in enriching the knowledge along with enhancement of essential skill required in performing certain practices in a specific crop cultivation. The skills required by a coconut cultivator need to be supplemented with additional skills in order to increase the yield of nuts. Government provide better support to the coconut growing farmers to improve their income, to reduce the risk involved in cultivation, implementation of quality agricultural practices and f inally enhancing the income of coconut grower in business mode. Training is a source of information, advice and influence in the decision making process. Training helps in enhancement of knowledge, improvement of skill, interaction with experts and to build confidence. Keeping this in view, the present study was conducted to know the training need areas of coconut growers in Gop block of Puri district of the state of Odisha.

Introduction

Agriculture is an important sector in Indian economy, 58 per cent of India’s population depends on agriculture for their livelihood. Agriculture is main victim of climate change, it can disrupt availability, accessibility and quality of food. Moreover, increase in temperature, reduction in ground water availability, f looding and salinity are the major limiting factors in sustaining and increasing vegetable productivity. As a result of this crop physiology and production both are affected. Organic farming can help to tackle climate change by reducing greenhouse gas emissions and amount of nitrogen fertilizer applied to farming land. In India we have advantage that the agricultural techniques we practiced before green revolution in our country is eco-friendly and today also it is somehow it is in memories of our older and younger farmer generation. Principle of sustainable farming is the base of organic farming. According to OECD (Organization for Economic Cooperation and Development) “Sustainable agro-ecosystem - agricultural and food systems are economically viable, meet society’s need for food assurance, while they retain and enhance natural resources and environmental quality for future generations” it is very clear from the definition that organic farming mostly emphasizes the environmental aspect and it includes.

Introduction

Agriculture is the measure livelihood of tribals in India. Indigenous Tuber crops, like Elephant foot yam (Amorphophallus) and Dioscorea play a valuable role to uplift the socio and economic status of people of tribal areas (tribal farmers) in terms of nutritional security and livelihood. In every year rural India subjected to wide spread of poverty, malnutrition, infant mortality rate etc. Ecological degradation, climate change, erratic rainfall and drought are the principal causes of food insecurity in these tribal areas resulting migration, periodic starvation and deaths. Therefore under erratic climate, tuber crops like Amorphophallus and Dioscorea, played a crucial role as life support crops to combat hidden hunger. Tuber crops are the traditional crops cultivated in order to meet the food requirements and give economical sustainability to the people. After cereals and legumes, tuber crops constitute a major staple or subsidiary food for all. Amorphophallus paeoniifolious and Dioscorea alata, important tropical tuber crops are excellent dietary staple for low-income consumers in tribal areas of Odisha state, better opting tuber crops cultivation rather than forest produces.

Introduction

Cotton is a fiber crop of Malvaceous family. There are four cultivated species of cotton viz. Gossypium arboreum, G. herbaceum, G. hirsutum and G. barbadense out of which G. hirsutum is the predominant species contributing about 90% to the global production. In India all the above four cultivated species are grown on commercial scale as a kharif crop. India is the largest producer as well as consumer of cotton in the world. The major cotton growing states of India are Maharashtra, Punjab, Haryana, Rajasthan, Uttar Pradesh, Madhya Pradesh, Gujarat and parts of Andhra Pradesh & Karnataka. In Odisha cotton cultivation is an up-coming activity. Many of the western belt farmers, mainly from Rayagada, Bolangir, Kalahandi, Nabarangpur, and Nuapara districts have been taking cultivation of this cash crop. According to the report of Odisha economic survey, 2018-19 a total of 1.45 lakh ha area was cultivated in 2017-18 producing 3.65lakh bales of cotton. In Rayagada district cotton is cultivated in 9 blocks out of 11 blocks comprising an area of 35170 ha. For the year 2018-19 yield was 12.37 q/ha with production of 25.6 MT of cotton according to the data given by District agriculture office, Rayagada.

Agricultural production system has gone a long way in supporting the world’s food requirement. The projected estimates revealed that to meet the global population of about 11.3 billion in 2050, the global demand for cereal will increase by 60% (Rosegrant and Cline, 2003, Bengtsson et al., 2006). Agriculture is considered as the chief agent of environmental transformation. The unrestrained attitude of Homo sapiens towards the use of natural resource catalyzing the causes leading to global warming, has increased the challenges manifold to provide food security in a sustainable manner. Increased concentration of CO2 and other green house gases have resulted in an increase of 0.760 C in surface temperature globally since nineteenth century and the mean global surface temperature is predicted to increase by an additional 1.30C to 1.80C by 2050( IPCC, 2007). Sinha and Swaminathan (1991) reported that an increase of 20C in temperature could decrease the rice yield by about 0.75 t/ha in the high yield areas and a 0.5oC increase in winter temperature would reduce wheat yield 0.45 t/ha.

Introduction

Citrus fruits are acidic, exotic fruits with juicy, bitter, fruit segments inside. Citrus fruits commonly originated in tropical and sub-tropical regions of the world. They have long been valued as part of a nutritious and tasty diet. The f lavours provided by citrus are among the most preferred in the world, and it is increasingly evident that citrus not only tastes good, but is also good for people. Citrus fruits have certain therapeutic properties such as antitumor, anti-inflammatory and anticancer, due to phytovitamins and nutrients present in them.

U value: U value is a measure of the heat transmission through a building part (wall or window) or through a given thickness of a material (insulation). U values with lower numbers indicate better insulating properties.

Ubiquinone: It is one of the groups of lipid soluble quinones that are found especially in mitochondria and have a long isoprenoid side chain, and function in oxidative phosphorylation as electron carrying coenzymes in electron transport.

UHT milk: This milk is homogenized, heated to atleast 135oC for about 2-3 second, cooled rapidly and then packed in sterilized containers aseptically. The milk in packs can be stored for several months with out refrigeration. The nutrient loss is negligible. Used for making yogurt commercially as it does not need to be boiled again.

UHT pasteurization: The milk is heated to ~150oC for a fraction of seconds practically no holding period. It is also called ultra pasteurization.

UHT sterilization: It is method in which food is sterilized, cooled and then aseptically placed in previously sterilized containers which are subsequently sealed in an aseptic environment.

Ulcer: A break in skin or mucous membrane with loss of surface tissue, disintegration and necrosis of epithelial tissue (often with pus). It is something that festers and corrupts like an open sore.

Ulcerate: A tissue or skin thatbecomes affected with an ulcer is called ulcerate.

Ulceration: The process of becoming a tissue or skin ulcerated is called ulceration.

K ration: It is a lightweight packaged ration of emergency foods developed for the U.S. armed forces in World War II (Plate 371).

Kaiser rolls: A round crusty roll often used for sandwiches (Plate 372).

Kalamata /calamata: It is brine cured black olive grown in Greece.

Kamucha: Tea cider or fermented tea beverages is known as kamucha. The fermentation process take place by the presence of yeast and bacteria

Kanji: Clean, black coloured, crisp and sound product of characteristic flavor prepared by full fermentation (chiefly lactic acid fermentation) of black carrot with 2.5% salt, 1% powder mustard and some amount of water. It is fermented to make ready to serve drink which is known as Kanji. Each kilogram of the grated carrots yields just 7-8 litres of kanji.

Karl Fischer Titration: Karl Fischer Titration is used for estimation of moisture content of foods (low moisture products).

Kasseri cheese: The simple unpasteurized sheep’s milk cheese (sometimes mixed with goat’s milk) is called kasseri. It is popular in Greece. It is made in the shape of wheel, fairly firm and pale yellow (Plate 373). The word kasseri comes from the Turkish kasar which means that it has ability to hold its shape when heated.

U value: U value is a measure of the heat transmission through a building part (wall or window) or through a given thickness of a material (insulation). U values with lower numbers indicate better insulating properties (Plate 614).

UHT milk: This milk is homogenized, heated to atleast 135oC for about 2-3 second, cooled rapidly and then packed in sterilized containers aseptically. The milk in packs can be stored for several months without refrigeration. The nutrient loss is negligible. Used for making yogurt commercially as it does not need to be boiled again.

UHT pasteurization: The milk is heated to ~150oC for a fraction of seconds practically no holding period. It is also called ultra pasteurization.

UHT sterilization: It is method in which food is sterilized, cooled and then aseptically placed in previously sterilized containers which are subsequently sealed in an aseptic environment.

Previous Year Questions
1. How has food production, incuding  horticultural crops, changed in  India during the last one decade? Write down its impact on food and nutritional security (20 marks, CSE 2023)
2. What is the food production and consumption pattern of India in the last fifty years? (15M, CSE 2021) 
3. Describe food grain production and consumption trends in India (7.5M, CSE 2019) 
4. Food production and consumption trends in India (12.5M, CSE 2015)

Previous Year Questions

1. Write down the constraints of fruit processing industry in India (10M, CSE 2023)

2. Enlist & Explain the issues & challenges in the growth of food processing industry in India (10M, CSE 2022)

3. Give a detailed account of constraints in sustaining the food-grain production in India. (10M, IFoS 2020)

4. What are the major constraints of food production in India (10 mark, CSE 2020)

5. Describe the food production constraints in Indian agricultural system. (15M, IFoS-2018)

6. Indicate the major constraints in food procurement and distribution. (10M, CSE 2017)

7. Discuss the procurement and processing constraints of food grain. (15M, IFoS-2017)

Previous Year Questions

1. What are the different ‘National Dietary Guidelines’ of India? What is your opinion on balanced diet of Indians? (20M, CSE 2021)

2. Classify foods on the basis of their function. Write down a balanced diet for a sedentary man & woman in India (10M, CS 2023)

National Dietary Guidelines

Recommended dietary allowance (RDA) is defined as “the nutrient present in the diet which satisfies the daily requirement of nearly all individuals in a population”.

Previous Year Questions

1. Differentiate between protective foods and energy foods. (10M, IFoS 2015)

2. What do you mean by ‘hunger’ and ‘hidden hunger’? Comment on various strategies in combating hunger. (15M, CSE 2021)

3. Classify foods on the basis of their function (5M, 2023)

Previous Year Questions

1. Discuss the iron and protein malnutrition in India. Describe the dietary pattern for mitigating the above-said malnutrition. (15M, IFoS-2022)

2. What is protein energy malnutrition? Give micronutrient deficiency in women and children. (20M, CSE 2017)

3. How are vitamins classified? Name the blood clotting vitamin. Give its various functions and sources. (10M, 150W, CSE 2019)

4. What do you mean by nutrient deficiency? Explain the micro-nutrient deficiency in context of work capacity of women and children. (12.5M, CSE 2015)

Previous Year Questions

1. What is food security? Why is it essential? Describe the current food security system in India. (10M, CSE 2022)

2. What is food security? Indicate the major constraints in food procurement and distribution. (10M, CSE 2017)

Difference Between Production and Productivity

• Production is total quantity produced in an area.

• Productivity is the quantity produced in one unit area.

• For example, total area is 10 hectares and the quantity produced is 15000 kg.

Objective

Vegetable seed separation requires specialized training. A little carelessness during the seed extraction process can seriously harm the plant’s viability and vigor in addition to its outward look. Inadequate extraction methods can also result in in-situ germination. The seed can be separated by the following methods.

1. Manual Method

(a) Maceration e.g., watermelon,

(b) Crushing e.g., brinjal,

(c) Scraping e.g., cucumber

(d) Separated e.g., muskmelon,

(e) Scooping e.g., pumpkins and

(f) Extraction e.g., squashes.

Sanitation

Sanitation and maintaining good hygiene conditions are the important aspect of seed storage in storage godowns. Maintenance of good hygiene conditions will maintain the quality of produce in the long run (Mahapatra et al., 2014) and these practices should not be overlooked. The threshing floors should be cleaned properly before the operation so that there is no mixing of seeds or any insect-pests or pathogens. Harvesting and threshing should be followed by cleanliness of godowns to protect the seeds from the harmful pest and pathogens (Upadhyay and Ahmad, 2011). The storage godowns should be well lighted and the area should be preferably sunny, free from weeds and mostly situated at elevated areas. Damp areas should not be selected for building storage godowns as it will affect the moisture per cent of seeds thereby enabling easy growth of insect-pests and diseases (Parimala et al., 2013). Before bringing the new produce to the storage godowns, they should be cleaned properly. The cracks and crevices of storage godowns if any should be sealed ahead and the walls of the godowns should be whitewashed (Hazam and Kumar, 2022). The new seed lots should not be mixed with the older lots. The floors should be disinfected, and it should be cleaned regularly.

Objective
After performing this experiment you will be able to:
To determine the peel strength of a given samples.
Introduction

Packaging is a key element to quality branding for an organisation, ensuring that the product labels are securely attached to products. Adhesion bond strength of a film to a surface can be quantified in terms of peel strength, bonding strength, and shear strength. Many protective covers are used as required for various applications. In most of such applications plastics films are used as the first preference of the manufacturers. In applications like, protective LCD screens and other scratch-prone surfaces very low peel force films are used. The force required to remove the protective films or the label is very important for both the consumer and the manufacturer. For example, for protective film application, the film must be easy to remove, yet the bond must be strong enough to remain intact for product security. Whereas, in a typical adhesive application, like laminated cups, the bond between the surfaces should be strong enough to withstand various environmental impact.

Objective

After performing this experiment you will be able to learn:

Special quality assurance needs, good manufacturing practices, HACCP, validation protocols, etc.

Introduction

Packaging is a very important element in product quality maintenance that is why quality of packaging has great influence and its quality assurance is necessary. Physical flow in the supply chain may deteriorate some packaging features, so their monitoring and proper conditions of storage, transport and suitable protection are important.

The quality of packaging is essential; it is an important element of product quality and supply chain effectiveness. Packaging is influenced by quality of raw materials, proper conduct of the production, storage, transport and distribution processes in a company. That is why a lot of companies implement quality assurance or management systems. In regards to packaging risk categories there are different requirements.

Objective
After performing this experiment you will be able to learn:
Identification of paper and paperboard.

Introduction

Paper can be broadly classified into two categories: coarse papers, which are normally made of unbleached Kraft softwood pulp and used for packing, and f ine papers, which are usually composed of bleached pulp and used for writing paper, bond, ledger, book, and cover sheets.

The main types of packaging papers are:

Kraft paper

Usually produced on a Fourdrinier machine, kraft paper is gritty and incredibly strong. It is then either machine-glazed on a Yankee dryer or machine-finished on a calendar. Sometimes it isn't calendared so that the rough surface will keep the bags from slipping over one another when they're stacked on pallets.

Definition: Food preservation can be defined as the science which deals with the process of prevention of decay or spoilage of food thus allowing it to be stored in a safe condition for future use. All foods gradually undergo deterioration or spoilage from the time they are harvested or manufactured. Some commodities spoil rapidly, while others can keep for longer but limited periods.
Preservation is a set of techniques used to extend the shelf life of perishable fruits and vegetables, maintaining their quality, nutrition, and safety. Proper preservation methods are crucial in post-harvest management to reduce wastage, meet consumer demands, and ensure food security. Let us explore the principles and methods of preservation using easy vocabulary
Principles of Preservation
• Temperature Control: Preservation involves maintaining low temperatures to slow down enzymatic and microbial activity. Lower temperatures can inhibit the growth of spoilage microorganisms and extend the freshness of fruits and vegetables.
• Removal of Air and Moisture: Air and moisture can accelerate deterioration and spoilage. Preservation methods often involve vacuum sealing or drying to remove air and reduce moisture content.

Microbiologists are constantly at risk of exposure to hazardous microorganisms that can cause diseases. These microorganisms may enter the body through inhalation, ingestion, cuts, abrasions, or the eyes. Therefore, handling cultures, slides, and live microorganisms requires utmost care. To ensure safety in the laboratory, several precautions must be followed:
1. Maintain cleanliness in microbiological labs at all times, taking extra care to prevent contamination from the air, equipment, personnel, or the environment.
2. Always wear a clean white lab coat or apron while working. After handling infectious microorganisms, the lab coat should be autoclaved.
3. No eating, drinking, or smoking is allowed in the laboratory.
4. Personal hygiene is essential in microbiological labs.
5. Wash hands with soap and water or a mild disinfectant solution (e.g., hypochlorite solution containing 50-100 ppm chlorine or 1-2% lysol solution) before starting work.
6. Disinfect the work surface by wiping down the lab bench with a disinfectant solution, such as 5% phenol or hypochlorite solution containing 200-300 ppm chlorine, both before and after work.
7. Keep the work area neat and organized at all times.
8. Use self-adhesive labels instead of moistening labels with your tongue.
9. Sterilize inoculating loops and needles by heating them in a Bunsen burner flame until red hot before and after use.

Introduction
• A cell is the most basic structural and functional unit of life. These are of two types:
i) Prokaryotic cells– Prokaryotes are those cells which lack a membrane bound nucleus and other membrane bound cell organelles. These cells are primitive cells. Examples, bacterial cells, archaeal cells.
ii) Eukaryotic cells– Eukaryotes are those cells which have distinct membrane bound organelles. These are advanced cells. Example, animal cells, plant cells, fungi.
• A microorganisms (from the Greek: mikros, “small” and organism’s, “organism”) are those small living organisms which cannot be seen with naked eyes. These are of two types:
i) Single cell– Organism made up of a single cell.
ii) Multi-cellular– Organism made up of multiple cells.
Shape and Arrangement of Bacterial Cells
• Prokaryotes display following shapes
• Spherical cells called Cocci
• Cylinders called rods or Bacilli
• Coma shaped called Vibrio
 

A. Morphological Examination of Bacterial Samples
Introduction
Bacteria are most widely distributed, the simplest in morphology, the smallest in size and difficult to identify. They are prokaryotic and a few are photosynthetic. Most bacteria are only 0.5 to 2.0 μm in diameter. Bacteria are generally rod, spherical or curved shaped. Rod shaped bacteria may vary considerably in length, have square round or pointed ends and may be motile or non-motile. The spherical or coccus shaped bacteria may occur single, in pairs in tetrads, in chains or in regular masses. The helical and curved shaped bacteria exist as slender spirochetes, spirillum and bent rods (vibrios). In this exercise the ubiquitousness of these organisms will be demonstrated in the air and water, on body and in mouth etc.
Materials
1. Petri plates containing nutrient agar
2. Sterile cotton swabs
3. Sterile water blank
4. Tube of nutrient broth
5. Materials for simple staining

Introduction
Microbiology techniques are used for various objectives like:
• To observe and isolate the micro-flora
• To test the microbiological quality of various food and dairy products
• To find the presence of any particular pathogenic microorganism
• To maintain a pure or mixed culture of specific microorganisms
1. Serial Dilution Techniques
• Bacteria are often present in such huge numbers that they can be difficult to count. Yet accurate counts are necessary for a variety of reasons like, for instance, assessing the quality of water or the safety of food. There are a number of counting techniques but most rely on the dilution of the sample to reduce the bacterial numbers down to a quantity that can be counted accurately.
• All bacterial plate count methods require the sample to be serially diluted until an estimated count of 30-300 colony forming units (CFU) on the plate is obtained. Plates with more than 300 CFU are very difficult to count. Plates with less than 30 CFU are not statistically reliable.
• If turbidity is observed in a broth culture, it might have millions more bacteria than you need. If this turbid broth is used directly for plating, all the CFU would grow together into a confluent mass and we would not be able to distinguish one colony from another.

(A) Effect of Temperature
Introduction
Temperature is one of the most important physical factors affecting microorganisms. Bacteria are different from higher plants and animals in the lack of homeostatic mechanism and cannot regulate heat generated by metabolism and are, therefore, directly and readily affected by temperature. Over a limited temperature range, there is a two-fold increase in the rate of enzyme catalyzed reaction for every 10°C rise in temperature.
Bacteria may be divided into three major groups with respect to their temperature requirements: (i) Psychrophiles, those with optimum temperature between 0°C and 20°C; (ii) Mesophiles, with optimum temperature between 20ºC and 40°C and (iii) Thermophiles, with optimum temperature between 40°C and 80°C. Thermophiles are of two types: (a) Facultative thermophiles with an optimum temperature of growth between 45°C and 60°C and (b) Obligate thermophiles with optimum temperature above 60°C. Temperatures in the range between 50°C and 100°C are normally in the lethal range for bacterial cells and spores. The range of temperature preferred by bacteria is genetically determined, resulting in enzymes with different temperature requirements.
Each organism grows within a particular temperature range (i.e. cardinal temperature points). The minimum growth temperature is the lowest temperature at which growth of a species will occur. The highest temperature at which a species can grow is its maximum growth temperature, and a species grows fastest at its optimum growth temperature.  Time of exposure is a vital factor in assessing the

In fruits, vegetables, and their products, the sugars are estimated as reducing sugars, non-reducing sugars, and total sugars. Reducing sugars in fruits and their products represent glucose and fructose. A combination of reducing and non-reducing sugars gives total sugars, whereas non-reducing sugars mainly sucrose are calculated after deducting the value of reducing sugars from the total sugars as invert sugar and multiplying the remainder with a factor of 0.95. Many fruit, vegetables, and their products like jam, jelly, juice, preserve, candy, fruit toffees, etc., containing substantial amounts of sugars, are estimated as a routine by using Lane and Eynon’s method using Fehling’s solution. However, for products having a smaller quantity of sugars, more precise methods like colorimetric methods can be used.
Method: Lane and Eynon’s Method
Principle: Invert sugar reduces the copper in Fehling’s solution to red, insoluble cuprous oxide. The sugar content in a food sample is estimated by determining the volume of the unknown sugar solution required to completely reduce a known volume of Fehling’s solution. Glucose, fructose and other] sugars capable of reducing oxidizing agents are called reducing sugars and this property is used for the estimation of sugars.

A cut-out examination is conducted for the evaluation of canned fruit and vegetables and other products for various quality attributes, viz., physical, chemical, sensory, and microbiological attributes. The examination is conducted by following the undermentioned steps: External/physical examination of unopened Can
1. External Appearance of the tin can: Note the external condition of the tin can like dents, rusty spots, scratches, leakage around seams, and the condition of ends. Based on external appearance describe the condition of the tin can by using the following terms:
i. Flat Can: A can where both ends are concave. The vacuum is high enough to maintain the ends concave.
ii. Flipper Can: A can where the vacuum is so low that mechanical shock will produce distortion of one or both ends.
iii. Springer Can: A can in which one end is distorted and the other end is flat and pressure on the convex end will cause the flat end to spring out when pressed.

Objective: Preparation of Turmeric powder
Turmeric (Curcuma longa L), the ancient and sacred spice of India known as ‘Indian saffron’ is an important commercial spice crop grown in India. It is used in diversified forms as a condiment, flavouring and colouring agent and as a principal ingredient in Indian culinary as curry powder. It has anti-cancer and anti-viral activities and hence finds use in the drug industry and cosmetic industry. 'Kum-kum', popular with every house wife, is also a by-product of turmeric. It finds a place in offerings on religious and ceremonial occasions. A type of starch is also being extracted from a particular type of turmeric. The increasing demand for natural products as food additives makes turmeric as ideal produce as a food colourant. India is the largest producer, consumer and exporter of turmeric in the world.

1. Introduction:- Overview of Good Laboratory Practices (GLP)
1.1 Definition and Scope of GLP
GLP refers to a set of standards that govern the organizational processes, personnel responsibilities, and conditions under which laboratory studies are conducted. It aims to regulate research environments and ensure the generation of high-quality, traceable, and reproducible results. The scope of GLP encompasses a wide range of scientific fields including pharmaceuticals, agrochemicals, veterinary products, and environmental safety assessments. Good Laboratory Practices (GLP) regulations were developed by the Organization for Economic Co-operation and Development (OECD) and well adopted by regulatory agencies world-wide. The primary objective of GLP is to promote high standards of accuracy and integrity in non-clinical research to protect human health and the environment.
1.2 Principles of GLP
The fundamental principles of GLP include:
• Study Planning and Protocol Development: Every study must have a clear plan and defined objectives, which should be outlined in a comprehensive protocol.
• Personnel Responsibilities: The roles of study directors, scientists, quality assurance personnel, and support staff are clearly defined.
• Test Systems and Facilities: Laboratories must maintain appropriate facilities and control systems for conducting studies. These include properly calibrated equipment, controlled environments, and standardized procedures.
• Data Integrity and Reporting: Data must be meticulously recorded, verified, and archived, ensuring it is traceable and reproducible.
• Study Documentation and Archiving: All records, raw data, and reports must be stored and accessible for a period defined by regulations, ensuring transparency and reproducibility.

The increasing global emphasis on sustainability and the circular economy has brought renewed focus to the valorization of agri-biomass and organic waste—the process of converting low-value, often discarded residues into highvalue products. Agricultural biomass, including crop residues such as straw, husks, and stalks, along with organic waste like food scraps, animal manure, and agro-industrial by-products, is both abundant and underutilized, particularly in developing regions. Traditionally, these materials have been disposed of through open burning, landfilling, or natural decomposition, all of which release significant quantities of greenhouse gases and contribute to environmental degradation. However, recent innovations in green technology and material science are transforming these waste streams into valuable resources. Through processes such as pyrolysis, fermentation, and biochemical conversion, agri-biomass and organic waste can now be converted into biochar, bio-based chemicals, and sustainable biomaterials. These products not only mitigate environmental harm but also create new economic opportunities across agriculture, industry, and the renewable energy sector. By leveraging these advancements, societies can significantly reduce waste, lower emissions, and accelerate the transition to a more sustainable and circular bioeconomy.

As the world faces mounting environmental challenges, resource scarcity, and the need to shift toward a low-carbon economy, sustainable waste management and alternative energy solutions are gaining critical importance. In this context, agri-biomass and organic waste valorization has emerged as a transformative area—addressing both the disposal of agricultural residues and organic waste, while enabling the generation of clean energy, bio-based materials, and high-value products.
Advanced Valorization Technologies
The field is rapidly evolving beyond traditional methods such as composting and combustion to adopt biochemical and thermochemical processes. Technologies like:
• Anaerobic digestion for biogas,
• Fermentation for bioethanol and organic acids,
• Pyrolysis for bio-oil and biochar,
• Gasification for syngas production,
Are increasingly supplemented by next-generation approaches like hydrothermal carbonization, microwave-assisted pyrolysis, and supercritical fluid extraction. These are tailored for India’s diverse agri-residues—rice straw,
sugarcane bagasse, coconut husk, and more—making them scalable across regions.
Importantly, these technologies now aim for value maximization, producing bioplastics, nutraceuticals, soil enhancers, and even sustainable construction materials.

Wafer : A thin crisp cake, candy, cracker or chips is known as wafer.
 
Waffle : A crisp cake of batter baked in a waffle iron is called waffle

Warner-Bartzler Shear : It is one of the oldest but commonly used devices used to measure the tenderness of meat. It is used to test the quality in the cooked meat.

Freezing : Freezing is a process where temperature of food (fruits, vegetable etc.) is lowered down considerably below freezing point so that the water present inside the food undergoes change in state from liquid to solid (ice) and gets frozen immediately eg Frozen Pea. Water is immobilized and solutes are concentrated to reduce the water activity.

Principles of preservation : Combination of low temperature, low water activity, and pre-treatments like blanching, dipping in sugar syrup etc. stop (reduce) the growth and activity of microorganisms.

Theory of freezing : Freezing takes place in two main steps

The foods we eat contain nutrients. Nutrients are substances required by the body to perform its basic functions. Nutrients must be obtained from diet, since the human body does not synthesize them. Nutrients are used to produce energy, detect and respond to environmental surroundings, move, excrete wastes, respire (breathe), grow, and reproduce. There are six classes of nutrients required for the body to function and maintain overall health. These are carbohydrates, lipids, proteins, water, vitamins, and minerals. Foods also contain non-nutrients that may be harmful (such as cholesterol, dyes, and preservatives) or beneficial (such as antioxidants). Nutrients that are needed in large amounts are called macro-nutrients. There are three classes of macro-nutrients: carbohydrates, lipids, and proteins. These can be metabolically processed into cellular energy. Micro-nutrients are nutrients required by the body in lesser amounts, but are still essential for carrying out bodily functions. Micro-nutrients include all the essential minerals and vitamins. There are sixteen essential minerals and thirteen vitamins.

Processed fruit and vegetable are considered as staple food products throughout the world, and are becoming more popular with the increase of the global urban population. As a result, demand for processed fruit and vegetable products tends to increase with population growth in the world. There is strong demand for processed fruits and vegetables in the developing world over the past few years. In poor countries, people consume less fruits and vegetables due to the relatively high prices. All forms of preserved fruits and vegetables are available only to the urban elite people. But rural mosses producing more than 90 % of these fruits and vegetables are usually deprived of their uses.

Demand of Processed Fruits and Vegetables

Demand of processed fruits and vegetables is increasing in the developing as well as under developing countries of world. The following reasons are responsible for day by day increasing demand of processed fruits and vegetables.

After harvesting the quality of fruits and vegetables begins to diminish and products is edible for only a limited time then products begin to spoil or rot. Losses occur during harvesting and handling of fruits and vegetables can be minimized by proper techniques but processed food spoilage is bit difficult to control and stop after infection and contamination of microorganism.

Spoilage

Spoilage is deteriorative process which results reduction in quality of food (fruits and vegetables) which become inedible. The changes in food that cause it to lose its desired quality and eventually become inedible is called food spoilage or rotting. After harvesting, the quality of fruits and vegetables begins to diminish and product is edible for only a limited time. The deterioration and spoilage of fruits and vegetables may occur at different ways.

The losses in harvested products begin immediately after detachment of products from their parental plants. After some time, theses products begin to spoil or rot. Spoilage can be defined as the deteriorative process which renders the food inedible or results in reduction in quality. Spoilage of fresh fruits and vegetables usually occurs during storage, transportation and during processing. They also get contaminated with spoilage organisms either from each other or from the containers. Mechanical injuries during harvesting and transportation further aggravates the deterioration process.

Food safety and hygiene has been an age-old concern. However, today it has become an important aspect due to the rise in foodborne illnesses for the past few decades globally. It is estimated by WHO that annually 600 million suffer from foodborne diseases as a result of unsafe food consumption while 4,20,000 deaths are recorded globally.

7.1. Origin and distribution

• Native to Tropical America, the Amazon Basin.

• Domesticated in Mexico and Central and South America.

• Cultivated in Karnataka, Kerala and Tamil Nadu mainly as intercrop and multi-storey crop with arecanut and coconut from 1970 onwards.

7.2. Economic importance

• Cocoa is a cauliflorus beverage crop.

• Chocolate, hot chocolate, cocoa powder and dry powder are made

• Cocoa butter (the fat) can be extracted.

• Used in Mesoamerican foods including tejate and Mexican drink that also includes maize.

4.1. Fruit ripening

• Genetically programmed stage of development overlapping with senescence.

• Ripe when attains full flavour and aroma

• Optimum ripening condition for fruits• Conditions for controlled ripening of fruits at RH of 85-90%

5.1.1. Climacteric fruits

• Apple, apricot, avocado, banana, ber, cherimoya, fig, guava, kiwifruit, mango, melons, pear, peach, plum, persimmon, papaya, tomato, sapota and passion fruit

5.1.2. Non climacteric fruits

• Carambola, cherries, citrus, grape, litchi, loquat, olive, pineapple, pomegranate and strawberry

Difference between climacteric and non-climacteric fruits

Naïve panel: It refers to the sensory evaluation panel that has not been trained specifically regarding the product evaluation being undertaken in the study.

Nano technology: It is the art of manipulating materials on an atomic or molecular scale to build microscopic devices. The word “nano’ meaning ‘dwarf” in Greek language refers to dimension / magnitude of the material / particle in the order of 109. Nanotechnology is nothing but manipulating of particles into very small particles called nano-particles. These particles have dimensions in the scale of nano-meter and used to design / build materials and devices. Nanotechnology has been provisionally defined as relating to materials, systems and processes which operate at a scale of 100 nanometers (nm) or less. Nanotechnology is an anticipated manufacturing technology that allows through and inexpensive control of the structure of matter by working with atom. It will allow many things to be manufactured at low cost and with no pollution. The concept of nanotechnology was first given by Nobel Laureate physicist Richard P. Feynman in Southern California in 1959. Nanotechnology is sometimes termed as Molecular Manufacturing based nanotechnology “MNT”.

The study and utilization of biomass for energy, composting, or other valueadded applications require accurate information about its properties. This begins with a scientifically sound process of sample collection, preparation, and analysis. Each step ensures that the data derived from biomass materials is representative, reliable, and applicable for research, industrial application, or environmental assessment.
Sample Collection
Biomass sampling methods vary depending on the biomass type and the analysis objective. For instance, truck-top sampling is used for biomass pellets, while quadrats are employed to gather cover crop biomass from fields. Regardless of the technique, the primary aim is to collect a representative sample that accurately reflects the overall characteristics of the biomass.
Purpose
The goal is to obtain a sample that accurately represents the average composition and properties of the entire biomass batch.
Biomass Types Commonly Sampled
• Agricultural by-products (e.g., husk, straw, stubble)
• Animal-derived waste (e.g., manure, poultry litter)
• Forest residues (e.g., bark, wood chips) • Organic or food waste
• Industrial biomass (e.g., bagasse, distillery by-products) Sampling Guidelines
• Random Sampling: Collect from multiple locations within a pile or batch to reduce sampling bias.
• Quantity: Gather a sufficient amount—typically several kilograms—based on whether physical, chemical, or energy content analysis is intended.
• Equipment: Use clean, non-corrosive tools such as stainless steel or plastic scoops.
• Preservation: Store in sealed containers or bags to maintain sample integrity and prevent contamination or moisture changes.

Naïve panel : It refers to the sensory evaluation panel that has not been trained specifically regarding the product evaluation being undertaken in the study.
Nano technology : It is the art of manipulating materials on an atomic or molecular scale to build microscopic devices. The word “nano’ meaning ‘dwarf” in Greek language refers to dimension / magnitude of the material / particle in the order of 10^-9. Nanotechnology is nothing but manipulating of particles into very small particles called nano-particles. These particles have dimensions in the scale of nano-meter and used to design / build materials and devices. Nanotechnology has been provisionally defined as relating to materials, systems and processes which operate at a scale of 100 nanometers (nm) or less. Nanotechnology is an anticipated manufacturing technology that allows through and inexpensive control of the structure of matter by working with atom. It will allow many things to be manufactured at low cost and with no pollution. The concept of nanotechnology was first given by Nobel Laureate physicist Richard P. Feynman in Southern California in 1959. Nanotechnology is sometimes termed as Molecular Manufacturing based nanotechnology “MNT”.

Ice bank cooling: Storing of fruit and vegetable in storage chamber with positive ventilation and system countries where ice formation is allowed during night time (as electricity cost of night is less as compared to the day time). Melting of ice occurs during day time and with proper air circulation by means of ventilation process, approximately 0.5-1⁰C temperature with 90% RH in the chamber is maintained. Ice Bank Cooler / Air forced cooler leads to desiccation of the produce (Plate 139). So use forced air high humidity cooler and these are known as Ice Bank Cooler. Ice bank coolers are useful for strawberry.

Lab coat: A loose white coat with deep pockets that is worn in a laboratory or medical office.

Labelling: It means any written, printed or graphic matter that is present on the label, accompanies the food or is displayed near the food, including that for the purpose of promoting its sale or disposal. After packaging, labels are required on the finished products intended for distribution and sale. Labelling can reflect on the quality of the product. It must be clear and informative. Information includes Name of the Manufacturer, Date of Manufacture, Net Weight, Gross Weight, Best before etc. Proper storage is needed for maintenance of the quality. Storage must be done only at recommended temperature, relative humidity, light and air / oxygen and carbon dioxide conditions etc. to maintain the quality of the food product. Label may include tag, brand, and pictorial or descriptive matter, written, printed, embossed, graphic, perforated, stencilled or stamped impressions. It is attached to container, cover, lid, or crown of a food package.

Laboratory: A place equipped for experimental study in a science or for testing and analysis. Broadly, it is a place providing opportunity for experimentation, observation, or practice in a field of study.

Lacquer: It is a colloidal dispersion of a solution of cellulose derivative, resin and plasticizer in solvent and diluents, where in all these constituents dried in air by evaporation of solvents, thus yielding a transparent, hard and water proof film.