eChapters

2.1 Nitrogenous biofertilizers

These biofertilizers augment nitrogen to the plants through fixation of atmospheric nitrogen, either symbiotically or asymbiotically. The major nitrogenous biofertilizers are:

2.1.1 Rhizobium

The word Rhizobium is a Greek word where “rhiza” refers to root, and “bios” refers to life. Rhizobium was first named by Frank (1889) which means ‘root living’ in Latin (Fig. 3). Some species of Rhizobium were later moved to new genera based on phylogenetic analysis. It consists of 49 rhizobial species and 11 non-rhizobial species.

In modern agriculture, use of synthetic chemical fertilizers are essential in agriculture for sustainable yield but, these have resulted in environmental pollution. The use of synthetic fertilizer could result in serious human health issues and also affects the soil microflora, besides being costly due to high production cost. Further, excess use affects soil processes and result in nutrient imbalances in plants with increased susceptibility to pests and diseases and also affects the symbiotic associations. Under these circumstances, biofertilizers could be an alternative for integrated nutrient management system in horticulture. The entire crop production system depends on soil beneficial microflora and their activities, which makes them highly potential alternatives to synthetic chemical fertilizers.

Biofertilizers or microbial fertilizers are essential for eco-friendly and sustainable cultural practices. The term “biofertiliser” has been defined in several ways due to its unique relationships between the plant and rhizosphere microflora. Biofertilizers mainly include nitrogen fixing bacteria, phosphate solublizing and potash solubiling bacteria.

India is bestowed with varied climatic conditions and a variety of horticultural crops are produced. It is estimated that 20-30% of the produce is lost before consumption because of various reasons including improper storage and this is where the need of processing for preservation arises. There are various ways of preserving the produce and various ways to process it.

Preservation is defined as methods of extending the shelf life of the produce in its original form or in a different usable form. The basic principle of preservation involves strategies which aim at reducing the spoilage. The horticulture produce is spoiled by microbial infection or infestation. Prevention of microbial damage can be achieved by keeping the produce away from microbes, by removing the microbes, obstructing the proliferation and by killing the microbes. Infestation in the harvested fruits may lead to other microbial infection and spoilage due to rotting.

Horticultural crops are highly perishable and the post-harvest loss is estimated to be 20-30% every year. There are various factors associated with post-harvest losses. It includes pre-harvest cultural operations, maturity index at which the produce is harvested, methods of harvest, pre and post-harvest treatments, packing materials and storage methods. Postharvest technology can be defined as the techniques which help to reduce the post-harvest losses.

Assessment of harvesting stage

Climate may be related to periodical events in plants life. The science dealing with this relationship is termed as phenology. The phenological data for horticultural crops include dates of planting, germination, flowering, fruit set, ripening and harvest. These dates are determined by the climatic factors prior to as well at the time of harvest. A useful phonological concept for the prediction of the harvest time is based on degree days. A “ Degree day” can be defined as a day when mean daily temperature is one degree above the minimum temperature for the growth of the plant. The minimum temperature for the growth of a particular plant is termed as “zero temperature”. Zero temperature vary according to crop. E.g. if zero temperature of a particular crop is 50°F, then a day with mean temperature of 68°F would provide 18° days. The degree days are also called as “heat units”. It can be determined by how many degree days are needed for the horticultural crop to reach harvesting stage.

Plants grow in the open in nature, hence are subjected to biotic and abiotic stress.

Biotic stress is due to living components such as:

Insects and pests

Nematodes, mites, snails, slugs etc.

Vertebrates like rats, birds, jackal, bats etc.

The plant experiences biotic stress when root, stem, bark, shoots, leaves, buds, flowers and fruits are damaged by the influence and activity of biotic factors.

Biotic factors Diseases

Like the pests, diseases also cause stress to plants. Diseases are caused by fungus, bacteria and virus. Sometimes the exposed part of insect eaten plant part becomes the entry pathway for fungus, bacteria and virus.

Horticulture is an art and science of growing plants. It is the practice of engaging ailing people in various horticultural activities such as gardening and flower arrangements in order to improve their physical, mental and spiritual health. Research confirms that health benefits escalate manifold when people connect with nature and plants by viewing and/or interacting with them. Major benefits of horticultural therapy includes sensory simulation and mood enhancement, mental relaxation, improvement of memory and concentration and an overall feeling of wellness. Horticulture therapy also helps in cultivating positive emotions and provides a meditative mood. It eases both physical and emotional pains and also improves social skills. It is proven that a simple viewing of a garden benefits a person both physically and mentally.

This practice has been used as therapy for centuries. In 1798, Dr. Benjamin Rush, considered as the “Father of American Psychiatry” documented that gardening has positive effects on mentally ill patients. Following World War, II gardening was used as a form of occupational therapy for war veterans. The concept of using nature to improve human health began to gain credibility in 1970’s. Rachel and Stephen Kaplan (1989) found that natural environments had relaxing and restoration benefits for people. The Journal of Therapeutic Horticulture, a peer-reviewed publication of the American Horticultural Therapy Association, has published authentic research papers since 1986. The American Horticultural Therapy Association (AHTA) serves to promote and advance horticultural therapy as a therapeutic intervention and rehabilitative approach. Degrees and certificate programs in horticultural therapy are offered at several colleges and universities and information is available on AHTA website.

Horticultural therapy is a worldwide practice and recognized as an effective treatment for clients of all ages and abilities. It is being used in several diverse settings including hospitals, rehabilitation centres, youth outreach and recovery programs, nursing homes, senior care facilities, prisons, mental health facilities, schools, botanical gardens etc. The client is engaged in horticultural activities facilitated by some trained therapists to achieve specific and documented goals. AHTA believes that horticultural therapy is an active process that occurs in the context of an established treatment plan where the process itself is considered as the therapeutic activity rather than the end product.

Horticulture therapy is a growing profession in rehabilitation and addiction centers, vocational centers, youth mental health programs, hospitals and nursing homes, and old age homes or senior citizen centers, mental health centers, schools and colleges.

Flowers of the garden are brought indoors to enjoy the beauty. Fresh flowers are arranged in various styles according to one’s choice. There are two major and distinct styles of arranging fresh flowers, namely the European and the Japanese. Both the styles are greatly influenced by the place where they have been originated. Flowers are also dried and used for different arrangements. Fresh flowers are used as ornaments and also for making floral patterns on the floor called Rangoli.

A garden has a number of elements which give shape to its breath-taking view. Both animate and inanimate elements are included to achieve a beautiful garden The living elements are lawns, rock garden, water garden, sunken garden, hedges, edges, shrubs, topiary, flower bed, specimen plants, pergola and arches, while the inanimate elements, also called as adornments, are stones, road, footpaths, seats, lamps, lanterns, steps, bridges, huts, swings, fountain, cascade, bird bath, clock tower, umbrellas, sculptures etc.

Micro propagation in also called as in vitro propagation. In vitro is a Latin word, meaning ‘in glass’. It refers to procedures done in controlled artificial environment, outside a living organism. These procedures naturally occur in the living system. Opposite to in vitro is in vivo which is also a Latin word, meaning ‘in living’. Biological processes that occur within the living system.

Micro propagation refers to the multiplication of plants, in aseptic conditions in containers under controlled nutritional and environmental condition. Micropropagation is done in artificial growth medium from various plant parts like meristem tip, embryos, anthers, axillary buds, leaf section, shootlips etc. It is a method by which a true to type and disease free plant can be regenerated from a miniature piece of plant throughout the year. Some popularly grown crops from tissue culture are as follows

Ornamental plants - orchids, lilium, gerbera, cordyline, begonia, ficus, etc.

A kitchen garden/ nutrition garden is a vegetable garden where the vegetable crops are grown in the backyard of a house or any available space in compound or rooftop of the house, to meet the daily requirement of the family. All the members of the family are collectively involved in a kitchen garden.

For a balanced diet, 300 g of vegetables are to be included in our daily food. But on an average, Indians take only 160 g per day. Hence to fill up the gap, vegetable cultivation not only in farmers’ holdings but also in the home gardens is encouraged.

Organic cultivation is a deep rooted cultivation tradition, which had been practiced in many parts of the world, before the advent of the practice of use of chemicals.

After the green revolution there has been exponential usage of chemicals in agriculture, right from planting to harvesting. Chemicals are used in the form of nutrient inputs or for plant protection against pests, diseases, weeds and keeping deficiencies at bay. Nevertheless, after the awareness regarding the detrimental effect of chemicals on soil, climate and human health, there has been a lot of contemplation on substituting the chemicals with the organic alternatives. Growing crops using organic inputs is known as ‘organic cultivation’. Organic cultivation is a sustainable form of cultivation where a proper balance is maintained and management of plant nutrition, pests, weeds and diseases is done in a sustainable manner, keeping the soil microflora intact and active. It does not release any chemical gases in the atmosphere, does not make the soil acidic and the soil does not lose its structure and texture. Contrary to chemical farming, where over a time period, the soil quality, texture and structure is lost, in organic practices, the soil texture, quality and structure improves over time, the plants become strong and the quality of the produce is improved. Other than organic inputs, organic farming relies on some sustainable practices like using native germplasm, crop rotations with legumes, green manuring, mulching, inter cropping, mixed cropping, incorporation of farm and animal waste compost. These simple age old practices build to organic content in the soil and elevate the soil’s efficiency to make nutrients and water to the plants. The soil microflora and earthworms become biologically active, efficient and exponentially proliferate. The goal of organic cultivation is to get maximum produce from the soil in such a manner that the soil, air and water are clean and protected.

GAP stands for “Good Agricultural Practices” which are used for production of safe agricultural produce which has zero microbial load on it and inside it. It is important for the producer to be acquainted with GAP.

Good Agricultural Practice of horticultural crops are intended to apply to the growing and processing of all produce as traded and used in the European Union. Hence, they apply to the production of all plant materials used in the food, feed and medicinal industries. They also apply to all methods of production including organic production in accordance with the European Union regulations.

The farmers involved in the cultivation of horticultural produce should ensure that the there is no damage to the existing wild life and the biodiversity in the farms which are maintained. It is advisable to regulate wild gathering by a specific guideline.

The main aim of GAP guidelines is to ensure that the produce meets the demand of the consumer and is of high quality standard.

It is therefore, important that they are produced hygienically, in order to reduce microbiological load to a minimum. They are produced with care, so that negative effect on plants in the course of cultivation, processing and storage is limited.

All participants in the production process are required to comply with these guidelines voluntarily and to develop practical measures to achieve it.

Greenhouses are frames or inflated structures covered with a transparent or translucent material in which crops can be grown under partially controlled or totally controlled conditions of atleast. It is large enough to permit persons to work within, to carry out cultural operations. Greenhouse cultivation as well as other modes of controlled environment cultivation has been evolved to create favourable microclimate, for the crop production all through the year or during off season, when the produce is highly priced and remunerative. Green house is a broader term of protected structures which includes different types of structures according to the need. Green houses vary in size and complexity from small home or hobby structures to large commercial units, from solar green house to sophisticated environment controlled ones.

Plant growth regulators are defined as chemicals other than nutrients and vitamins which regulate (or) modify the physiological process ofthe plant. A plant hormones or phytohormones are chemical substances which are naturally produced by plant in specific organs and are translocated from site of synthesis to the site of action. They bring about specific physiological response, even in very low concentration. The quantity of synthesis of these hormones differ from plant to plant, plant internal and external factors. They are readily absorbed and these chemicals move rapidly through the tissues when applied to different parts of the plant. A plant growth hormone may be termed as a plant growth regulator, but not vice - versa, since other than natural plant hormones, plant growth regulators are synthetically manufactured chemicals.

Plant growth regulators have a diverse chemical composition. Based on the general response the chemical mediates in the plant system, they are classified as growthpromoters and growth inhibitors/retardants. However, a particular growth regulator may be growth promoter at a lower concentration and growth inhibitor at higher concentration.

The term growth refers to an irreversible increase in size and weight of the plant. It normally reflects an increase in protoplasm, which may occur through increase in size of the cell and number of cells. Hence, the process of cell elongation and cell division provides the basis for growth. Cell division and enlargement are complicated processes involving synthesis of many organic compounds such as protein, cellulose and nucleic acid, besides the physical force required, which results in cell enlargement. The growth of the whole plant is compartmentalized into areas called ‘meristem’ where cell division and cell elongation are localized. The meristem cells such as shoot apex, root apex, cambium and the intercalary zones undergo repeated mitosis resulting in replication of DNA and nuclear material and finally the cell mass increases. Adjacent to this area of meristematic activity is the region of cell elongation, which phases in to the region of differentiation and maturation.

The increase in protoplasm (occurring in cell division and elongation) is brought about through a series of events in which water, carbon - di-oxide and inorganic salts are transformed into living materials. These events include (a) photosynthesis (production of carbohydrates) (b) nutrient absorption and translocation (uptake of water, nitrogen and other mineral elements) and (3) anabolism (synthesis of various materials produced in plant from the carbon fragments produced by photosynthesis and from the inorganic nutrients and water absorbed from the soil). The energy required for all these processes is provided by a catabolic process viz., respiration (degradation of sugars and fats to release energy). The net balance of anabolism and catabolism results in growth of the plant.

The types of crops and the practices used to grow them and the sequence in which they are grown altogether refers to cropping system. It comprises of all components required for the crop production and their relationships with the environment. Traditionally the cropping systems aim at maximizing the per unit area productivity, which can be done by growing improved high yielding varieties, by adequate and scientific crop management practices and by increasing cropping intensities with the help of different cropping patterns.

In today’s world cropping system should produce more, at the same time the practices should be ecologically and environmentally sustainable. There should be efficient utilization of land and water. It should be designed to conserve soil, soil moisture and improve soil resilience.

Training and pruning of horticultural crops is very important practice to obtain a strong frame work of tree and sustained productivity. It is necessary to understand the various terms used to make the subject more comprehendible.

Crotch: It is the angle made by the scaffold limb to the trunk or the secondary branch to the scaffold limb.

Head: The point on the trunk from which first branch arises.

Leader: It is the main stem growing from ground level up to the tip dominating all other branches.

Low head trees: Trees in which scaffold branches arise within 60-70 cm height from the ground level.

High head trees: Trees in which the scaffold branch arise 120 cm above the trunk.

Scaffold branches: The main branches arising from the head are known as scaffold branches.

An orchard is the place where different kinds of fruit crops are grown in large scale. An orchard is a long-term investment and needs lot of planning and expertise. The orchard crops are generally trees, which ultimately have a large spread, so when they are planted, the distance between plants and rows is kept keeping in mind the final spread of the tree. So, before the trees attain their full growth, some suitable crops which are of short duration, like vegetables, flowers, spices and herbs are grown as intercrops.

Fruit trees are perennial, may be tropical, sub tropical and temperate types and thus require proper environmental conditions and suitable management practices for their successful growth.

Pot mixture is the media, used in the pots for propagation of nursery plants. It is the combination of different materials in a particular proportion to create better environment for rooting, growth and development of plants.

The most commonly used ingredients to make potting mixture areas follows

Plant propagation techniques refer to the methods by which the plants are multiplied and increased in number.

Methods of Propagation

i) Sexual Method of Propagation - Seeds are used as propagating material.

ii) Asexual Methods of Propagation - Plant parts, other than seeds are used for plant propagation.

Different crops are grown in a field. Any plant growing in a place where it is not desired competing with the main crops, has to be weeded out and such plants are called ‘weed’.

Effect of weed menace The weeds

Reduce crop yield and production efficiency. It competes with the main economical crop for space, water and nutrients.

Reduce crop quality.

Hamper intercultural operations.

Reduce crop quality.

Obstruct the flow of water in the irrigation channels.

Exert allelopathic effect on crops.

Harbour insect and pests, which affect the main crop of interest.

Increase the cost of production.

Water is an extremely essential component in plant growth and development. It is of utmost importance for photosynthesis, cell division, cell growth / elongation, respiration, nutrient uptake, mineral utilization and much other metabolic process, which directly affect the quantity and quality of the produce. Hence quantity and quality of water play a vital role in performance of a crop. A well distributed water supply, throughout the growth of plant is essential. Rainfall is the major source of water for the crops. Rainfall recharges the surface water resources such as rivers, streams and ponds and also the ground water resources like wells.

Nutrient management is one of the key aspects that ensure good quality produce in optimum quantity. Nutrient availability influences growth and productivity of crops. Sixteen elements are recognized as essential nutrients for growth and development of plants. These essential elements are carbon, hydrogen, oxygen, nitrogen, phosphorus, potassium, calcium, magnesium, sulphur, iron, zinc, manganese, copper, boron, molybdenum and chlorine. While carbon, hydrogen and oxygen are derived from air, soil and water, other elements are taken by the plant roots from the soil, according to the requirement of the plant. The soil contains these elements in varying quantities depending on the origin of the soil. According to the quantity of requirement of these elements by plants for its various growth processes,the elements are classified into different categories.

Major nutrients or primary nutrients - These are required by plants in large quantities because they are involved in all the processes of plant growth and development. Major nutrients are nitrogen, phosphorus and potassium.

Secondary nutrients - These are required by plants in relatively smaller quantities for growth and development. Secondary nutrients are magnesium and sulphur.

Micro nutrients - As the name suggests, these are required by plants in minor quantities for their physiological processes. These elements are iron, zinc, manganese, copper, boron, molybdenum and chlorine.

Each of the plant nutrients has a definite quantitive role and specific function in the physiological processes of plants. If any of the essential element is deficient or absent in the soil sysem, the plant growth is affected negatively and this is reflected as inferior quality produce. On the contrary, if a nutrient is excess in the soil system, it hinders in absorption of other nutrients and also may itself be toxic. Hence to get the required growth, quality and quantity of the produce, optimum availability of all the nutrients should be ensured.

The performance of plants is affected by the soil in which it grows and climate and micro climate of its surroundings.

Impact of soil

The soil provides anchorage, nutrients and water for plant growth. Soil fertility status, structure and texture influence the plant growth and productivity.

Classification of soil

On the basis of the organic and inorganic contents and particle size and texture, the soils have been classified. The inorganic matter in the soil constitutes of varying amount of sand, silt and clay, on the basis of which the soils are classified as follows.

Sandy soil

These soils have coarse textured and large pore spaces, have poor water holding capacity. Retention of nutrients in this soil is very poor. This type of soil is suitable for precocious crops. Sandy soils initiate rapid root growth, hence good as propagating medium. Since sandy soils has low in nutrient content, supplementation of adequate nutrition is imperative to achieve good plant growth.

A number of tools, implements and machineries are used in cultivation of horticultural crops to make every operation easy and efficient. There are a number of operations involved in cultivation of horticultural crops, like making of nursery, propagation of plant material, field ploughing, breaking of clods, levelling, making bunds, sowing and planting, plant protection, training, pruning, harvesting, lawn mowing etc. All these operations are physically taxing and cannot be carried out efficiently without proper tools, implements and machineries. Following are some important tools -

1. Bill hook: To cut and remove big sized unwanted branches of trees.

2. Buckets and plastic pots: used in the orchard for spraying, transport water, carry harvested produce etc.

3. Budding and grafting knife: The budding and grafting operations in propagation of many horticultural plants are carried out using budding and grafting knife.

4. Country plough: Used in field preparation for ploughing the soil, incorporation of organic manures into the soil at the time of last ploughing, summer ploughing in conserving of soil moisture.

5. Crow bar: Used to loosen the soil, digging and deepening the pits and channels.

6. Dibbler: Used to make holes and sow the seeds in the nursery as well as in the main field.

7. Digging fork: It is of a great use in harvesting the tuber crops without damaging the produce.

The Government of India has established boards for important crops. The boards are statutory bodies which help in guiding the production and export. The main objectives for setting up the boards are -

To monitor and promote the export of primary items.

To empower the producers by providing trainings and close guidance.

To conduct research to improve the commodity, e.g. Central Coffee Research Institute, Coir Research Institute etc.

To advise the government on policy matters such as price fixing, fixing quota for export and signing trade agreements.

To promote the commodity by opening offices and outlets in India and abroad.

To showcase the commodity by participating in trade fairs and exhibitions.

The Horticultural crops show wider adaptation and therefore exact delineation of the agro-climatic areas specific to each crops is not possible, except for the typical temperate and tropical species. However, our country can be broadly divided into seven zones for horticultural crops as indicated below:

1. Temperate Northern Region

Comprising of states of Jammu & Kashmir, Himachal Pradesh, Hilly areas of Uttar Pradesh and West Bengal. Temperate fruits, cool season vegetables are the important horticultural crops in the zone.

2. North Western Arid Region

Comprising ofthe entire Rajasthan state, Gujarat and parts ofPunjab & Haryana. Arid fruit crops like ber, pomegranate, amla, date palm, wood apple and seed spices like coriander, cumin, fennel occupy major area in this zone.

3. North Eastern Sub-tropical Humid Region

Comprising of states and union territories like Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland and Tripura. Fruit crops like banana, pineapple, citrus, jack besides plantation crops like tea and large cardamom are also grown here.

Horticulture is a wide field and includes a great variety and diversity of crops. In general, these crops are classified as follows:

1. Crops grown for the food and/or vitamin and mineral content, for e.g., apple and sweet potato.

2. Crops grown for their beverage properties, for e.g., tea and coffee.

3. Crops grown to beautify the environment, for e.g., the grasses of the well planned lawn.

4. Crops grown to express sentiments, for e.g., cut roses, jasmine.

5. Crops grown for perfume for e.g., rose, jasmine.

6. Crops grown for spices for e.g., pepper, nutmeg.

Horticulture deals with the art, science, business and technology of cultivation and management of horticultural plants. The word Horticulture is derived from two Latin words viz. ‘Hortus’ (means garden) and ‘Culture’ (means growing). Horticulture is an aesthetic science that deals with cultivation of fruit, vegetable, spice, plantation, medicinal, aromatic and flower crops. There is a vast therapeutic use of horticulture wherein gardening and aroma therapy are used to deal with new age maladies like depression and various addictions.

In ancient times, huge gardening spaces to grow large number of fruits, vegetables and flowers were available and these areas were demarcated with the help of high walls. This enclosed area was referred to as garden. This led to the term garden culture. The land area is decreasing due to industrialization and population growth, at the same time, there is a drastic increase in demand for horticultural produce. To meet the increased demand for horticultural produce and to cope up with the space constraints, multitier cropping systems, vertical gardening and other intensive cultivation practices are being resorted to. Hence, horticulture may also be described as the “Practice of growing and manipulating plants in a relatively intensive manner”.

Presently, fruits, vegetables, flowers and ornamentals are grown not only within the home premises, but also in large quantities on a commercial scale. In other words, many horticultural crops throughout the world are grown primarily as business enterprises. Thus, horticulture has two aspects in general i.e., the amateur and the professional. In addition, with the establishment of horticultural experiment stations as an integral part of colleges and universities, comparatively a large amount of scientific information on the behaviour and cultivation of horticultural plants and products is freely available. This information or literature, constitutes the science of horticulture, and the application of this scientific information constitutes the “Technology of Horticulture.” Thus, present day horticulture may be defined as the science and technology of production, processing and merchandising of fruits, vegetables, flowers and ornamentals where each crop has its own science and technology. Consequently, horticulture may appear differently to different people. To a teacher, professor, research scientist, extension official and landscape architect, it is an applied science and a profession, while to a commercial producer, wholesaler, a retailer of horticultural products, or to the manufacturers or seller of horticultural products, it is a business. It is also a fascinating hobby for connoisscur.

Growth: Growth involve cell division subsequently cell elongation. Increase in volume that is associated with fruit growth largely result of cell division or cell elongation or both. In some fruit such as apple, extension of intercellular space may also contribute the growth. Generally growth by cell division in early stage whereas, cell elongation during later stage.

Two distinct type of growth curve are observed when increase in such variable such as fresh weight, volume and dry weight of fruit.

1. Single sigmoid curve
2. Double sigmoid curve

In case of single sigmoid growth curve firstly there is rapid increase in size then after decline so there is only one rapid growth is observed e.g. Apple, pear, tomato, cucumber and strawberry.

In case of double sigmoid two rapid growth period are separated by an intermediate period that is less growth or no increasing growth curve. Double sigmoid growth curve can be used as two successive sigmoid curve thus there are three clearly define stage of growth.

Jam: Jam is a product made by boiling fruit pulp with sufficient sugar to a reasonably thick consistency. Jam is mainly prepared by apple, pear, sapota, apricot, peach, papaya, karonda etc. It can be prepared from one kind of fruits or from two or more kind of fruits. In general jam contains 0.5-0.6% acid and invert sugar should not be more than 40%.

Drying- Removal of water from product by influence of non conventional energy source like sun and wind.

Dehydration- Process of removal of moisture by the application of artificial heat under controlled condition of temperature, humidity and airflow etc.

Advantage of dehydration over sun drying

The process of dehydration is much more rapid than sun drying.

Dehydration requires less floor area.

Dehydration is done under very hygienic condition.

Sun drying is not possible in cloudy weather or during rain while dehydration or mechanical drying is not dependent on weather.

The colour of dehydrated or mechanically dried fruit and vegetable remain uniform due to uniform drying temperature.

Canning: Canning is the process by which sealing of the food product and sterilizing them by heat for long storage is known as canning.

History: The term canning was first invented by N. Appert (1804) in France. In honour of the inventor canning is also known as appertization (Appart is known as the father of canning) and Saddington (1807) in England first described the method of canning. Peter Durand (1810) got first british patent on canning of food in tin container and William under wood introduced canning of fruit on a commercial scale in U.S.A.

Principle of canning: The main principle of canning is destruction of spoilage organism by means of heat.

Proper handling, packaging, transportation and storage reduce the post harvest losses of fruits and vegetables. For every one percent reduction in loss will save 5 million tons of fruit and vegetable per year. Processing and preservation technology helps to save excess fruit and vegetable during the glut season (off season). The technology has become a necessity to improve the food safety and strengthen nation’s food security. The technology helps to boost export of agricultural commodities in the form of preserved and value added products e.g. mango, pineapple, citrus, grapes, tomatoes, peas, potato and cucumber being processed on a large scale.

Principles and Methods of Preservation of Fruits

Preservation: Preservation means just protect the foods against the spoilage, but scientifically it may be defined as a science which deals with the process for prevention of decay or spoilage of the food is called preservation. In other words, just controlling the physical, chemical or microbial changes in the foods is called preservation.

Climbers

Climbers are group of plants which have weak stems and ability to climb up the support with the help of modified organs for sunlight and air, twiners differ from climber in the way that they do not posses such modified organs but twine around the support cover it and reach the top. Climber are woody or herbaceous plant which climb up the trees and other tall objects with the help of support of their special modified organ, such as tendrils, root, thorns, rootlets, hooks etc.

Tendrils- Bigonia gracilis, Clematis paniculata etc.

Thorns- Bougainvillea species, Climbing roses etc.

Rootlets- Ficus repens etc.

Hooks- Gallium aperine, Rubus australis etc.

Climbers and twiners are important group of plants. Climbers and twiners add the beuty, colour or fragrance in the garden and artificial structure like garden wall, topiary, arches, pergola etc. are made with the help of climbers.

Trees

A trees is a woody perennial plant with clear stem or trunk. Trees trend to be long leaved living up to several 100 year.

TREE- logical meaning of each letter

T - Temperature and micro-climate moderation.

R - Removal of air pollutant.

E- Erosion control.

E - Energy conservation.

Annuals Border

In this type of border annuals are planted according to their height to beauty of the garden. Annuals border are found two types.

• Single face border.
• Double face border.

Single face border- In this type dwarf plant is kept on front of beds, medium height annuals are planted in the centre while the taller annuals are planted in the back.

Double face border- In this type tall annuals are planted in the center and medium and dwarf annuals are planted in both sides of tall annuals so that full view can be seen from both side.

Annuals

Annuals or seassonals are the group of plants which complete their life cycle in one season or in one year. Annuals are commonly known as seasonal as they complete the process of life like germination, growth flowering and seed formation in one season and finally the plant without. Annuals are widely used for garden decoration, cut flower and pot plants. They are frequently grown as bedding plant and in rock garden on the sides of lily pool and in shrubberies.

Garden Walls : A garden lover will never like to block the view of his garden by putting a wall along its periphery. A garden as it is enjoyed from inside should also be visible from outside.

• Low brick or concrete or stone wall of say 60-90 cm height and to put over it some grills.
• Alternatively walls from 1.8-5.0 m may also be erected depending upon the size of garden.
• One may grow creepers such as Ficus repens over the wall.

Flower Beds: The most essential criterion of a flower beds is display the flowers in the best way possible. It may be born in mind that flowers look best when massed in a bed. The flower beds are of special importance under condition of the plains of India since they can be kept planted throughout the year unlike those in England or other parts of Europe where nothing can be grown in the open between November-March. Annuals and herbaceous, perennial flowers, flowering plants are grown in flower beds to provide massing effect of different colours borders is continuous beds of more length than width containing plant of one kind only.

Hedge

When shrub is planted on boundary for fencing, it is also called as hedge. In other word shrubs or trees planted at regular intervals to form a continuous screen is called a hedge. It may be ornamental or protective or both. Hedge also become an important feature of formal layout to serve various function as screening of the area out building, tennis court, vegetable garden, hardening of unwanted place etc. All the shrubs cannot be planted for making an ideal hedge due to different nature of growth.

Garden

Garden is a place where vegetables, fruits and ornamental plants are grown mainly for recreation. The garden incorporates both natural and man-made materials.

Types of garden

The major garden types which shall be discussed are: English garden, Mughal garden, Persian garden, Italian garden, French garden, Japanese garden etc. Out of these the Mughal, Persian, Italian and French styles fall in the category of formal gardens, whereas the English and Japanese gardens are classified in the informal style of gardening.

Lawn

Lawn is a natural green carpet, and it is important feature of a landscape and a garden without a lawn is not considerd complete. Lawn is an area of land closed mowed grasses it is primarily developed for aesthetic and recreational purpose. A lawn is an integral part of a garden and landscape besides aesthetic and recreational purpose and several other purposes. Lawn provides a place for taking rest after tiring of the day, holding parties, social functions, passive and active recreation. Distinguishing characteristic of turf grasses is the ability to with stand close mowing and still providing a functional dense healthy ground cover. Lawn is also called as heart of garden. Lawn can be called as turf pitch a field, sod, yard, are green depending upon the plantation usage continent. Lawn is a ground cover of perennial grass, ditch, persists enclose mowing and require proper management practice.

J.B. Olcoth designed first experiment in lawn grass at Monchester in USA in the 19th century. Festuca and Agrostis species were used to make turf (Lawn) during 1880 in U.K. In the early 19th century lawn become wild spread out side of parks golf course. Now a day in many metro cities of India lawn has become a cultural of the passion of many homes.

The planning of a garden is an art. It is said that a poet is born, and in that sense a garden architect is also born. But that does not mean that a garden architect has nothing to learn. On the contrary he should learn enough of geology, geography, garden history, styles of gardening, and above all should have a profound knowledge about plants. It is imperative to know at the outset what is meant by landscape gardening. A landscape may be defined as any area, either big or small, on which it is possible or desirable to mould view or a design, whereas landscape gardening may be described as the application of garden forms, methods, and materials with a view to improving the landscape. The art of designing is known as “landscape architecture,” although the older term landscape gardening” is also popular.

Before discussing the principles of gardening in detail, it will be worthwhile to make some useful suggestions. The first and the foremost thing are not to imitate another garden which has secured a prize in a competition. One has to develop one’s own design giving due consideration to the local conditions. One more mistake which is commonly made is to plant many more specimens than a garden can accommodate causing overcrowding. In a landscape garden any difference in levels has to be taken advantage of, but in a perfectly flat land it will be costly to create artificial undulations. In each garden the care should be at least one feature or there be a second these two should harmonize with each other. Before planning a design are must be sure for what purpose the garden is utility or beauty or both.

Vegetable crops: A seed is borne on fruit and fruit is a mature ovary and ovary is a typical part of flower. Flower in angiosperm, consists of four parts these are calyx/sepal, corolla/petals, androecium/stamens and gynocium/pistil, outer whorl of flower is collectively referred to as calyx. The individual components of calyx are called as sepal. Petals are collectively referred to as corolla. Petal is a unit of second inner whorl after sepals. Stamen is part of flower bearing the male reproductive parts composed of anther and filaments. Pistil is part of flower bearing the female reproductive parts composed of stigma style and ovary.

Seed Production Techniques in Vegetable Crops

Share (%) of F₁ hybrids- Cabbage 85%, Watermelon 70%, Okra 23%, Tomato 80%, Chilli 80%, Cauliflower 50%. Among the Asian countries, India is the 2^nd largest production of hand pollinated hybrid seed in vegetables.

The purpose and the mode of marketing of vegetables determine the type of vegetable gardening. The various types of vegetable gardening are as follows.

Home or Kitchen gardening

Market gardening

Truck gardening

Processing gardening

Vegetable forcing

Seed production gardening

Floating vegetable gardening

Seed

A seed is a mature ovule consisting of an embryo together with stored food, all enclosed by a protective coat. It is product of the ripened ovule of gymnosperm and angiosperm plants which results as a consequence of fertilization and some growth within the mother plant formation of seed completes the cycle of reproduction. The embryo develops from zygote and the seed coat from the integument of ovule. A seed has three main parts these are seed coat, endosperm and embryo. Embryo includes the root, the cotyledon and embryonic leaves. Seed is located inside fruit and a fruit is a mature ovary. In broad sense any plant part which is used for commercial multiplication of crop is called seed. Thus in case of potato stem and tuber are also known as seed. Improved seed results in (1) Better germination (2) Vigorous seedling growth (3) Higher crop stand (4) Better quality of produce (5) Ultimately in higher crop yield.

Development of seeds: Successful pollination and fertilization are the prerequisites to produce a viable seed. During pollination the pollen grains are transferred from anther to the stigma and get stuck there in the sticky fluid secreted by the stigma. The fluid contains sugar which induces germination of pollen grains. The pollen tube grows downward through the style in the ovary until it reaches the embryo sac and discharges two male gametes-one is fused with a female gamete and forms the zygote (2n) and the other is united with two pollar nuclei to produce endosperm (3n). The zygote develops and gives rise to embryo embedded in nutritive tissue developed from endosperm. The nucellus tissues surrounding these structures provide necessary energy for their proper development. Like fruit, the seed also exhibits sigmoid and sometimes double sigmoid pattern of growth. Various changes occur during the course of seed development and the sequences of development may vary from species to species keeping the basic theme unaltered.

Seedlings of several vegetables are first raised in well prepared nursery beds, followed by transplanting in the field. Raising of seedling in the nursery beds is economical as well as easier to take care of young, tender seedlings against pest and diseases. Further, raising of seedlings in nursery allow more time for land preparation.

Site and soil for nursery

In selecting a site for nursery beds, following points should be considered viz sunny situation, good drainage and irrigation facilities. Sandy loam soil with plenty of organic matter are ideal for starting nursery beds. In case of heavy soils it is desirable to add coarse sand to modify the soil condition. Before sowing seed it is essential to sterlize the beds by steam or formaldehyde or any other chemical to do away with problem of damping-off disease. Burning of leaves or straw in the beds is quite helpful in controlling certain soil borne diseases and pests.

Physiological disorders are abnormalities in plants which are associated to non-pathogenic factors. A plant or its parts may show unusual growth, function or deformity. Such abnormalities are widely referred to as disorders. These may be incited by nutrients deficiency or excess, hormonal imbalance, abnormal growing conditions etc. Some commonly observed disorders have been dealt in here suitably.

The current status of advances in fruit breeding is through the development of different scientific approaches augmented by ever-increasing knowledge and application of genetics, statistics and biotechnology. These innovative approaches very specific for a species in most of the cases, are the major tools of the fruit breeders to tackle the different objectives of fruit improvement programme at present Fruit improvement is a very slow process due to the long generation cycle varying from species to species, thereby reducing the chances of exploiting genetic recombination. Besides this factor, most of the fruit species are either highly heterozygous or polyploidy in nature. Due to this reason the asexual propagation of fruit plants is a conventional means while wide segregation occurs upon sexual reproduction. Such expectation is not unlikely because the types selected as commercial varieties are definitely to be vigorous ones, and a positive correlation exists between vigour and heterozygosity.

This discussion on breeding of fruit plants involves different aspect of the species concerned is so essential as well as fundamental that discussion of them must procede any consideration of breeding methods themselves. The plant species are grouped into two-self-pollinated and cross-pollinated. These two groups have emerged on the basis of pollination mechanism which plays significant role in the method of breeding application. To emphasize the difference in the reproductive systems of these two groups one should know the details about floral biology, mechanism of pollination control, reproduction by asexual and sexual means and self and cross-pollinated plants.

The quantitative increase in plant body such as increase in the length of stem and root, the number of leaves etc., is referred to as plant growth whereas, the qualitative changes such as germination of seed, formation of leaves, flowers and fruits, falling of leaves and fruits is referred as development. Utilization of these substances for proper development of the plant is regulated by certain chemical messengers called plant growth substances or plant growth regulators, which in minute amounts increase or decrease or modifies the physiological process in plants. Plant growth substances are the chemical other than nutrient which required in very small amount but without which plant can not complete their physiology.

The two sets of internal factors, viz., nutrition and hormone control the growth and development of the plant. The raw material required for growth is supplied by nutritional factors which include the minerals, organic substances the protein, carbohydrates, etc.

Phytohormones: These are the hormones produced by plants which in low concentrations regulate plant physiological process. These usually move within the plants from a site of production to a site of action.

Plant growth regulators: These are organic compounds other than nutrients, which in small amounts promote, inhibit or otherwise modify any physiological process in plant.

It may be defined as any organic compounds which are active at low concentrations (1-10 ml) in promoting, inhibiting or modifying growth and development in plants. The naturally occurring (endogenous) growth substances are commonly known as plant hormones, while the synthetic ones are called growth regulators.

Plant hormones: It is an organic compound synthesized in one part of plant and translocated to other parts, wherein very low concentration causes a physiological response.

The plant hormones are identified as promoters (auxins, gibberellin, and cytokinins), inhibitors (abscisic acid and ethylene) and other hypothetical growth substances (Florigen, death hormone, etc.).