eChapters

Abstract

A perennial plant or simply perennial is a plant that lives for more than two years. The term is often used to differentiate a plant from shorter-lived annuals and biennials. The term is also widely used to distinguish plants with little or no woody growth from trees and shrubs, which are also technically perennials. in vitro technologies are continuously expanding in the field of biology. Plant tissue culture has become a general title for a very broad subject. Commercial use of micropropagation is still limited, because of its relatively high production cost resulting mainly from high labor costs, low growth rate in vitro, and poor survival rate of the plantlets during acclimatization. Micropropagation of woody perennials is essential due their importance in production of secondary metabolites, which are playing a vital role now a days. Stages of micropropagation i.e mother plant selection, establishment of the aseptic culture, multiplication, root regeneration and transfer to the natural environment, which are systematically reproduced in many protocols which will aids in micropropagation studies of many woody perennials. Thus the review of present study attempts to provide a comprehensive account on micropropagation of woody perennials complementing conventional programmes for improvement.

Introduction

Healthy seeds and seedlings are the first and essential requirement for achieving full yield potential of any vegetable crop. In recent years, vegetable growers have become highly conscious of the importance of quality seeds or seedlings. A major portion of the area under vegetable cultivation in India is now sown with hybrid seeds, which are costly but give higher yields and quality produce. In view of the high cost of seeds, some vegetable crops like tomato, brinjal, capsicum and cucurbits are being transplanted after growing nursery under protected conditions to achieve maximum germination count and healthy plant establishment. Raising of seedlings in plug trays or portrays is one such technology that achieves the above requirement. This technology is fast emerging as agro enterprise in India for its obvious advantage to both the nursery grower and the farmer. Soil-less substrate consisting of coco-peat and vermiculite is filled in plug trays and one seed is manually placed in each cell of the plug tray. However, manual seeding is labour-intensive operation requiring about more labour and time consuming. Mechanized precision seeding of plug trays is, therefore, necessary to enhance the capacity of rapidly growing nursery industry in India.

Introduction

The demand for agriculture commodity is growing world over and meets the ever increasing targets as per the demand, productivity needs to be raised further. This can be realized in two ways- by increasing area of cultivation and/or through increased efficiency of inputs (both natural and manmade). The scope for the farmer is very limited worldwide and for the latter, the primary input is the solar energy which is most abundant except in few cases like colder regions. In the coming future, the availability of land for cultivation will be a major impendent due to rapid urbanization, hydroelectric projects, dams and rivers, highway roads and also there is a degradation of fertile land due to soil erosion (120.72 million ha), soil salinity and water logging (8.4 million ha) Nath et al., 2007 and Hegde et al. (2015).  Under this situation, multi-storied cropping system will be a viable option to provide food, nutrition and income security to people Awasthi et al., (2008). The available arable land could be effectively utilized for production of field and horticultural crops to achieve nutritional security for the growing population and sustainable income for the farming community. Increasing food production with limited natural resource is a great challenge to the scientific community. Thus, production per unit area of land, time and inputs can be increased by improving efficiency of the rate and extent to which solar energy is harvested for conversion to economic produced.

1.    Fruit Crops
    
2.    Spices
    
3.    Masticatory Crops
    
4.    Vegetables
    
5.    Plantation Crops
    
6.    Tuber Crops
    
7.    Medicinal Plants
    
8.    Ornamental Plants
    
9.    Future Prospects
        
References

Introduction

India is bestowed with wide range of climate and physic-geographical conditions and as such is most suitable for growing various kinds of horticultural crops such as fruits, vegetables, flowers, nuts, spices and plantation crops (coconut, cashewnut and cocoa). Its horticulture production has increased significantly over the last two decades and as per the final estimates, by 2013-14, it has increased to about three times (2.87) since 1991-92 and to about twice (1.90) compared to the production in 2001-02. This has placed India among the foremost countries in horticulture production, just next to China. As per National Horticulture Database 2014, during 2013-14, India’s contribution in the world production of fruits & vegetables was 13.6% & 14%, respectively. Total production of fruits during 2013-14 was about 89 million tonnes while that of vegetables was 163 million tonnes.

1.     What is IPM
    
2.    What is a Pest
    
3.    Importance of Crops in IPM
    
4.    Impact of Environment in IPM
    
5.    Crop Stage Specific IPM
    
6.    Management Practices
    
7.    Tropical Tuber Crops
    
8.    Ornamental Plants
    
9.    Medicinal Plants
    
10.    Aromatic Plants
    
11.    Plantation Crops
    
12.    Masticatory
    
13.     Spices
    
14.    Fruit Crops
    
15.    Vegetables
        
References

Abstract

Plant architecture, plays a crucial role in gathering multiple resources from the environment. As a plant grows, they change its architecture with the surrounding environment for altering available resources. The architecture of the plant is modified through the distribution of assimilate, which conclude the growth rates of different organs. Plant roots expand to acquire soil water and nutrients (e.g. nitrogen, phosphorus) from different soil layers by adjusting their direction in order to growth which transported and allocated to whole plant for maintenance and expansion of plant organs. All plants gradually develop their architecture according to source–sink activities and endogenous signals. This adaptation can result in complex structures. This chapter deals with the importance, different method for changing the architecture   of vegetable crops for improving their yield and quality.

1.    Land Preparation
    
2.    Tillages
    
3.    Planting
    
4.    Field Maintenance
    
5.    Vegetation Control
    
6.    Animal/ Bird Control
    
7.    Insects and Diseases Management
    
8.    Irrigation
    
9.    Manuring
    
10.    Harvesting
    
11.    Collection and Transportation
    
12.    Integrated Mechanization
        
References

1.     Groups of Polyembryony (PE)
    
2.     Mechanism of Polyembryony and the Genetic Bases
    
3.    Classification of Polyembryony
    
4.    Polyembryony – Its Practical Implications
        
References

1.    Postharvest Losses of Fruits and Vegetables
    
2.    Minimization of Postharvest Losses
    
3.    Postharvest Management Practices
    
4.    Selection of Varieties
    
5.    Harvesting
    
6.    Sorting /Grading
    
7.    Washing
    
8.    Trimming
    
9.    Curing
    
10.     Delatexing or De-sapping
    
11.    Waxing
    
12.    Pre-cooling
    
13.    Hot Water Treatment
    
14.    Postharvest Disease Management
    
15.    Regulation of Ripening
    
16.    Sprout Inhibition
    
17.    Packaging
    
18.    Transportation
    
19.    Marketing
    
20.    Storage
    
21.    Conclusion
        
References

Abstract

Fruit, Vegetable, Flowers, Medicinal and Aromatic crops are as horticultural crops play significant role in improving the productivity of land, generating employment, enhancing exports, improving economic conditions of the farmers and entrepreneurs and providing food and nutritional security to the people. For better management of the existing crops and to bring more area under horticulture crops, updated and accurate database is necessary for systematic planning and decision making. Remote sensing (RS) is an advanced tool that aids in gathering and updating information to develop scientific management plans. Many types of sensors namely microwave radiometers, laser meters, magnetic sensors and cameras collect electromagnetic information to derive accurate, large-scale information about the Earth’s surface and atmosphere. Because these data and images are digital, they can easily be quantified and manipulated using computers. RS can be used in efforts to reduce the risk and minimize damage. The same data can be analyzed in different ways for different applications. A number of studies were aiming at identification of crop, area estimation, disease and pest identification, etc. using satellite data in horticulture. The potential use of RS techniques in Horticulture is briefly reviewed in order to exploit the available techniques for efficient crop management.

Precision Farming

Precision farming is a concept of proper crop management based on the observation, technology, measurement and response during inter and intra field variability in crops. It is also known as satellite farming or site specific crop management (SSCM).It is an application of right things, in right place, in the right way and at the right time. It has three main requirements viz. first identify various field location, second capture, interpret and analyzed the data in a proper scale & frequency and third, adjust the input with farming practices for efficient economic yields. There are 17 Precision Farming Development Centers (PFDC) located in different agro-climatic zones of India. It is mostly exist in SAUS, ICAR Institute and IIT Kharagpur. 

Introduction

Tuberose (Polianthes tuberosa) occupies an important position among commercial ornamental bulbous crops, because of its highly fragrant flowers which can be used in various ways and is essentially a florists flower. The white tubular flowers emit the most popular odour and hence are cultivated on a large scale in some parts of the world for the extraction of its highly valued natural flower oil. The lingering delightful fragrance and excellent keeping quality are the predominant characteristics of this crop. It is popularly known as Rajanigandha, derives its generic name from the greek word Polios, which means white or shinning and anthos meaning a semi perennial bulbous plant. It is commercially cultivated for cut flowers and loose flowers trade and also for extraction of its highly valued natural flower oil. The serene beauty of the flower spikes, bright white flowers, sweetness of blooms and delicacy of fragrance of this ornamental crop, transform the entire area into a nectarine and joyous one. Fresh flowers and value added products of tuberose are exported from India to USA, Germany, United Kingdom, Italy, The Netherland, Japan, United Arab Emirates and Saudi Arabia.

Precision farming is one of the most scientific and modern approach to sustainable agriculture. It involves management of within field variation and helps farmers to grow crops more efficiently. Precision farming is concerned with the management of variability in the dimensions of both space and time. Variability of resources is a key factor of precision farming.   Precision farming is the application of technologies and principle to manage spatial and temporal variability associated with all aspects of horticultural production for improving crop performance and environment quality. Precision farming calls for an efficient management of resources through location specific hi-tech inventions to produce cost-effective and eco-friendly consumer- acceptable quality products (Mondal and Tewari, 2007).

1.    Factors Causing Spoilage of Foods
    
2.    Methods of Preservation
    
3.    Preservation by use of Preservatives
    
4.    Preservation by Irradiation
    
5.    Preservation by Low Temperature
    
6.    Methods of Food Freezing
    
7.    Principles of Preservation by Fermentation
    
8.    Preservation by Dehydration
    
9.    Preservation by Thermal Processing
    
10.    Advantages of Processing
    
11.    Demand for Processed Products
        
References

1.    Basic Principles
    
2.    Scale and Proportion
    
3.    Balance
    
4.    Rhythm
    
5.    Simplicity
    
6.    Unity
    
7.    Transition
    
8.    Focal Point or Emphasis
    
9.    Elements
    
10.     Variety
    
11.     Grouping
    
12.     Mass
    
13.    Sequence
        
    Further Reading

Abstract

Roselle, or Jamaica sorrel (Hibiscus sabdariffa L.) is a popular vegetable in many tropical regions, cultivated for its leaves, seeds, stems and calyces of which, the dried calyces are used to prepare tea, syrup, jams, jellies and beverages. It is an annual herbaceous shrub belongs to family Malvaceae originated in old world tropics. The fresh calyces and young leaves are used as a vegetable in various cuisines and the plant also yield industrial bio fibre. It also has nutraceutical potential, high pigment content, and nutritional and medicinal properties. Roselle is a drought tolerant crop and cultivated throughout the tropics and subtropics during hot and rainy seasons. China and Thailand are the largest producers and control much of the world supply, where as the best quality roselle comes from Sudan. Many medicinal applications of this plant have been developed around the world. It is used to treat hypertension, pyrexia, dyspepsia, and leukaemia hepato protective, due to its high content of protocatechuic acid. Leaves are emollient and sedative and also show antihypersensitive, antihyperlipidimic, diuretic and anti oxidant properties. Hence, it is an ideal candidate crop for low input multi-cropping system for the food and nutritional security for developing countries.

1. Introduction

Psyohrometrio is the study thermal and physical properties of gas-vapour mixtures. Ambient air is the mixture of dry air and water vapour and some pollutants. The moisture and pollutant content vary from place to place. The amount of pollutant and water vapour decrease with increase in the altitude. The air is completely dry above 10 km altitude. In many unit operations moist air is required and properties of air changes with temperature and pressure. The pollutants has to be removed before using moist air as a process air either by filtration or circulation. So it is necessary to determine the amount of water present in the air and effect of different unit operation on thermal properties and change in the heat and moisture content of mixture.The International Joint Committee of psychrometric data have fixed the composition of dry by mole fraction as: Oxygen: 0.2095, Nitrogen: 0.7803, Argon: 0.0093, Carbon dioxide: 0.0003. The following are the properties of the dry air

Molecular weight    28.966

Water is the most critical component of life system. Irrigation plays vital role in rising and stabilizing yield and maintaining quality of fruit crops grown in tropical or sub-tropical climate. Micro irrigation is one of the modern and advanced methods of irrigation which is becoming popular in areas having problems like water scarcity and poor quality of water. Since the competition for water between agricultural and non-agricultural sector is increasing day by day, the efficient management of water resources is very essential to meet the water requirement. It is anticipated to reduce water use for agriculture by 70% in the coming decade, where the present day share is 80%. Demand for water is increasing in non-agricultural sectors like industry, energy, domestic use etc. Hence, policy makers and researchers consider water as the main obstacle for growing enough food crops in the coming years. In India where population is increasing at alarming rate, the area under irrigation should go up from 60 million hectares to 114 million hectares by the year 2050. In this context, micro irrigation plays a major role under limiter water agro ecosystem.

Introduction

India is a rich center of plant diversity due to varied climatic conditions as well as soil qualities which provide a better platform for the diverse plant groups. In India around 45000 plant species are spread over the area (Mayers, 1988). These plant species multiply and produces the new plant. The multiplication of plants is termed as propagation and the art of propagation is as old as civilization of human being. The history of civilization began with the propagation and growing of plants. Plant propagation was in practice in pre-historic period. However, the propagation process has got commercial popularity only recently. The success in plant propagation depends on a thorough knowledge of the growth of plants, choice of suitable method and technical skill. In nature, plants multiply naturally to perpetuate themselves. Now-a-days, propagation practices have been totally modernized and became advanced from field to in vitro. Variation in plant propagation can be observed in the nature like some plants are producing many seeds for future generation with their unique type of dispersal mechanism. Among a large