eChapters

13.1 INTRODUCTION

The hot arid regions are spread over about 31.7 million ha area mainly in the States of Rajasthan, Gujarat, Andhra Pradesh, Punjab and Haryana, which inhabit on an average 61 persons per square km making up a home for population of nearly 20 million people. The Indian arid zone is characterized by high temperature and low and variable precipitation which limit the scope for high horticultural productivity. However, these conditions greatly favour development of high quality production of fruits such as date palm, ber, pomegranate, citrus, aonla, bael, grapes, guava and vegetables such as cucurbitaceous crops, spices and some medicinal plants. The optimized technologies and inputs could increase the existing low productivity. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas. The amelioration of the extreme conditions is also considered vital for life support to the inhabitants of this area. The recent awareness regarding the potential of these ecologically fragile lands for production of quality horticultural produce has not only opened up scope for providing economic sustenance for the people of this region, but also for bringing new areas to increase production through horticulture.

The arid horticultural crops have developed and/or modified to perform certain vital physiological functions even under stress. Strong deep root system (ber, bael, aonla, wood apple, jamun, etc.), moisture synchronous flowering and fruit development (ker, lasora, aonla, pilu, etc.) and other xerophytic characters i.e. leaf shedding in summer (ber), scanty foliage (ker), spiny cladode (cactus pear), mucilaginous sap in plant part (ker, gonda, pilu, bael, etc.), sunken stomata and fur/ hairiness and waxy coating on the leaf surface (phalsa, ber, gonda, fig, etc.) thorny nature, and selective or reduced absorption of cation (Na⁺) and anions (Cl^-, SO4^—) for survival under adverse arid conditions are peculiar adaptations. Therefore, cultivation of suitable species of fruit and vegetables in the arid areas will increase the sustenance of the inhabitants and provide the alternate sources of income through development of nurseries, small scale industries and exports.

4.1 INTRODUCTION

Ever since the man appeared on the earth, he has been harnessing the natural resources to meet his basic requirements. Reference to soil, water and air as basic resources, their management and means to keep them pure are mentioned in the Vedas, Upanishads and in ancient Hindu literature. Agriculture began sometime during 10000 BC and during 1930 AD use of chemical came into vogue (Sarswat et al., 2003). The phenomenal increase in population of both man and animal in the last century and fast growing industrialization and urbanization in last few decades have overstrained the natural resource base, which are getting degraded much faster than ever before. Thus, the attention of whole world is focused on how to increase production to feed the burgeoning population and the question uppermost in every ones mind is “how can we produce enough food without damage to the natural resource base, in a sustainable manner?” Precision farming is a promise in this regard. It appears to reduce risk of crop failure (De Boer, 1997).

What is Precision Farming?

It is information and technology based farm management system to identify, analyze and manage variability within fields for optimum profitability, sustainability and protection of the land resource without disturbing the environment. It is basically means adding the right amount of treatment at the right time and right location within a field.

3.1 INTRODUCTION

Today’s technological advancement has reached a level where a farmer can have access to information and tools to manage mechanized field operations. They can now measure, evaluate and deal variability within field (e.g. soil fertility, water availability and yield) that was known to exist previously but was not manageable, to his advantage. The ability to handle the variation in productivity in the field and maximize financial return, reduce waste and minimize impact on environment has always been objective of an enterprising farmer in horticultural sector, especially those who advocate sound horticultural practices. Since precision farming proposes to prescribe strategic farm management decision in the field operations to help to serve this purpose through mechanization, sensing and communication technology, automate data collection, documentation and utilization of this information. Such an approach in horticultural production management gives rise to what is now termed as precision horticulture, soil specific crop management (SSCM), spatially variable crop production (SVCP), smart farming (SF) etc.

2.1 INTRODUCTION

With increasing population, urbanization and continuous depletion of natural resources, there has to be a paradigm shift in farmer’s perception from production to productivity and to profitability. In the present scenario, the major challenges arising are shrinking land and depleting water and other related resources in agriculture. There is need for promoting farmer friendly location specific production system management technologies in a concerted manner to achieve a vertical growth in horticulture production duly ensuring quality of produce and better remuneration per unit of area with judicious use of natural resources. In this endeavour, precision farming aims to have efficient utilization of resources per unit of time and area for achieving targeted production of horticultural produce. With the revolution in information technology, now it has become possible to focus on the positioning of agricultural tools with high degree of accuracy and sophistication for maximizing returns. The combination of information technology and use of hi-tech equipments made it possible for the introduction of precision farming. It is a comprehensive system designed to optimize agriculture production through the application of crop information, advanced technology and management practices. With recent advances in geographic information systems, it has become possible to focus on site specific crop production technologies so as to harness the potential of horticulture through innovative technologies in a sustainable manner.

Precision farming is also known as precision agriculture. A farmer is not only expected to produce more for the increasing population and his family but save and protect the fragile environment while practicing it. Advanced technologies with appropriate and exact inputs such as precision farming can take care better of environment. Precision farming is right farming operations at right time leading to maximize profit. Every farming activity performed with precision by doing the right thing, in the right place, in the right way, at the right time and with right technology leading to maximize profit is known as precision farming. It is an efficient, eco-friendly and accurate management of agriculture inputs such as water, seed, fertilizers, pesticides and harvesting tools and machinery to maximize profit and reduce waste. The basic concept of precision farming is to match agricultural inputs and operations as per crop (variety/hybrid/cultivar) and agroclimatic conditions with accuracy to their better use efficiency. Perfection (nothing requisite is wanting) in farming is the key to precision farming.

Precision farming is based on global positioning system (GPS). The unique character of GPS is precision in time and space. Its use is spreading to all farm operations. Precision farming is an integrated information and production based farming system that is designed to increase long term, site specific and whole farm production efficiency, productivity and profitability while minimizing, waste and unintended impacts on the environment. This concept of precision agriculture is based on observing, measuring and responding to inter and intra field variability in crops.

Farm management strategy is the key to precision agriculture that uses integrated smart technologies such as sensors, GIS, GPS, satellite radars, drones, IoT (Internet of things) and data analytics to develop informed crop production and management decisions. The field variations are precisely measured with the help of technologies to optimize applications of inputs such as manures, fertilizers, pesticides, bio-agents and water use to increase crop yield at minimum cost. The aim of precision farming is to increase productivity, decrease production costs and minimize the environmental impact of farming.

Precision farming is an approach, where inputs are utilized precisely to get increased average yields as compared to traditional cultivation techniques. Precision farming aims to improve crop performance as well as environmental safety. In other words, precision farming is the matching of resource application and agronomic practices with soil attributes and crop requirements as they vary across the field. Precision farming can improve both yield and profits by using optimum resources, while at the same time making agriculture more sustainable and less polluting. Sustainable precision farming is the most valuable innovation in farm management that is based on using Information and Communication Technologies (ICTs). This is the most recent innovation technology based on sustainable agriculture and healthy food production. Popular definition of Precision Agriculture (PA), Satellite Farming or Site Specific Crop Management (SSCM) describe the term as ‘a technology enabled approach to farming management that observes, measures, and analyzes the needs of individual fields and crops’.

Precision farming involves the collection of data by observation and measurement, and the subsequent response. Sensing is key to the collection of data; whether this is remote from space by satellites, by aircraft or drones, or by proximal sensors used on the ground, mounted on vehicles or otherwise. Responses are increasingly automated and data are often integrated into wholefarm management systems. Early commercial applications were directed towards improving crop nutrition, however, utilising precision technologies to control weeds, pests and diseases is now a reality.

Precision crop protection requires detailed data on the occurrence and distribution of problems at the earliest possible stage of detection. An early detection is the key for successful management of pests in precision farming. Some of the key aspects are:

Identification: Identifications of crops, targets and beneficial; temporal and spatial distribution: presence of the target before, during and after the crop growth period;

Sampling techniques: statistically valid sampling regimes must be used to permit an accurate view of any problem

Thresholds: under particular circumstances, the point at which action to ensure levels of infestation or damage are kept to those deemed to be acceptable;

Prediction: the speed and pattern of development of a problem must be capable of being modelled, e.g. spread and severity of insect pests and fungal diseases; weed emergence according to species, dormancy and environmental conditions.

Abstract

Powdery mildew infected leaves of apple hyperparasitized by Ampelomyces quisqualis were collected from field and examined for the presence of the dark brown pycnidia of  hyperparasite. The hyperparasite was isolated on potato dextrose agar medium by standard isolation technique. The morphological characters of the hyperparasite such as size and shape of pycnidia and pycnidiospores were studied. Six systemic fungicides were evaluated for their compatibility with A. quisqualis under in vitro conditions. Dinocap was least inhibitory giving 65.56 per cent growth inhibition of A. quisqualis followed by mancozeb (66.67%). Effect of these fungicides was also seen on conidial germination and germ tube length of A. quisqualis. Maximum conidial germination and germ tube length was observed in mancozeb followed by benomyl and dinocap.

Abstract

A promising strain/seedling have been identified that produces only male flowers (small and pink tinged) on the ventral side of the current season’s shoot all along its length. As many as 24 flowers per shoot were observed. The seedling continued to flower for about one month which attracts large number of honey bees. The pollen is also produced in abundance that dehisces early in the morning. Preliminary observations on the flowering behaviour and pollen studies have revealed that it can be used as a suitable polliniser for persimmon cultivars in general and Hachiya cultivar in particular.

1. Introduction

Phytochemicals are compounds present in fruits that are not required for normal functioning of the body, but have a beneficial effect on health or play an active role in amelioration of diseases. Phytonutrients have various health benefits like antimicrobial, anti-inflammatory, cancer preventive, antidiabetic and antihypertensive. The pigments of the fruits have many therapeutic benefits including vasoprotective and anti-inflammatory properties, antiproliferative, chemo protective and anti-neoplastic properties, reversing age related deficits (Joseph et al.,1999) and useful in controlling oxidative stress during pregnancies complicated by intrauterine growth retardation (Pawlowicz et al.,2000). Cocculus hirsutus Linn. is a climber and widely distributed in tropical and subtropical climates. This plant is commonly called as kattu kodi in Tamil. It belongs to the family Menispermaceae. The fruit is a drupe which is size of small pea with red purple endocarp (Fig.1a and Fig.1b). The plant is used in treatment of gonorrhea, spermatonorrhea, Urinary troubles, diarrhea and hyperglycemia (Kirtikar and Basu, 2002). The leaves of the plant have been evaluated for anti hyperglycemic (Badole et al., 2006); antibacterial (Panda et al., 2007); diuretic and laxative (Ganapaty et al., 2002). Several isoquinoline alkaloids are present in leaves and roots; the important ones cohirsine, cohirsinine, cohirsitinine, hirsutine and jamtine (Viqaruddin et al., 1987; 1991; 1992; 1993). Since no detail scientific approach has been made to study phytochemicals of cocculus hirsutus fruit. So in the present investigation preliminary

Cordial is a sparkling, clear, sweetened fruit juice beverage from which pulp/ fibrous material has been removed completely. It contains at least 25% fruit juice, 30% total soluble solids (TSS), 1.5% acid and 350 ppm sulphur dioxide. Lemon and lime are the most suitable fruits for making cordial.
Recipe: The recipe for the preparation of cordial as a general guideline is as under:
Extract the juice from lime or lemon as in squash and store in glass bottles after adding potassium metabisulphite @ 1.0 g/kg of the juice. Allow the juice to settle for a month. Decant the clear juice without disturbing sediments and strain it through a fine muslin cloth. Prepare syrup by mixing sugar with water, boil, strain and allow to cool. On cooling, mix juice in syrup and strain the cordial through muslin cloth if necessary. Add KMS and fill into bottles. Stor in a cool and dry place.

Jam: Jam is a product made by boiling fruit pulp with sufficient sugar to a reasonably thick consistency. Jam is mainly prepared by apple, pear, sapota, apricot, peach, papaya, karonda etc. It can be prepared from one kind of fruits or from two or more kind of fruits. In general jam contains 0.5-0.6% acid and invert sugar should not be more than 40%.

Fruit nectar is a type of fruit beverage that contains not less than 20% fruit juice or pulp, not less than 15o B total soluble solids and acidity ranging between
0.3-0.5 % but not exceeding 1.5%/. For orange and pineapple nectar, the fruit juice shall not be less than 40%. The product is preserved by heat processing/ thermal processing, as such no chemical preservative is permitted in nectars. Unlike squashes, fruit nectar is served chilled as such without any dilution.
Mango, guava, pineapple, papaya, jamun etc., are the most suitable fruits for making nectar.
Recipe: As a general guideline, the following recipe is used for the preparation of fruit nectar:
Procedure
i. Select fully mature and ripe fruit and extract pulp as discussed under fruit pulp making but do not add any chemical preservative.

Fruit pulps are semi-finished products that are used for manufacturing finished value-added products like jam, ready-to-serve beverages, squash, appetizers etc. According to Food Laws, pulp refers to an unfermented but fermentable product, pulpy, turbid or clear, obtained by a mechanical process from sound ripe fruits/vegetables. These are preserved either by heat processing or by using chemical preservatives. The maximum preservative permitted under Indian Food Laws is 1000 ppm sulphur dioxide added in the form of potassium metabisulphite.
Mango, guava, apple, pineapple, papaya, bael, guava, peach, plum, apricot etc., are the most suitable fruits for making pulp for use in finished product preparation.
Procedure
i. Select fully mature and ripe fruit like mango, guava, apple, peach, apricot, kiwi, etc., and wash thoroughly.

Jam is prepared by boiling the fruit pulp with a sufficient quantity of sugar to a thick consistency, firm enough to hold fruit tissues in position. For the preparation of jam, not less than 45 parts of fruits are used for every 55 parts of sugar. The jam prepared by using two or more fruit pulps is called mixed fruit jam. Apple jam, apricot jam, mango jam, guava jam, pineapple jam, and mixed fruit jam prepared by using the pulp of two or more fruits are quite common. According to Food Safety & Standards Regulations,2011 the minimum TSS in the Jam shall not be less than 65%(w/w). Earlier the minimum limit was 68% (w/w)
Raw material, ingredients and utensils required
1. Fruits like mangoes, guava, apples, apricots, plum, peaches and kiwi etc singly or in combination
2. Stainless steel knives, de-corers, ladle, utensils for cooking and mixing, glass bottles (Jars), LPG or Diesel Bhatti, bucket/tub for washing, Stainless steel sieve, Steam Jacketted Kettle, Boiler (for the commercial unit) etc. 

Ready -to -Serve (RTS) drink is a type of fruit beverage that contains at least 10% fruit juice/pulp and 10o Brix total soluble solids with acidity ranging between 0.3-0.5%. The product is not diluted before serving like squash; hence it is called a ready-to-serve beverage. The product can be preserved by using 70 ppm SO2  or 120 ppm benzoic acid. Mango, orange, guava, lemon, lime, litchi, kiwi fruit, apricot, pineapple, etc., fruits are used for making RTS beverages. For lime & lemon drinks minimum level of juice content is 5% as per Indian Food Laws.
Recipe: As a general guideline, the following recipe is used for the preparation of ready-to-serve drinks:
Procedure
i. Select fully mature and ripe fruit like mango, guava, apricot, kiwi, etc., and wash thoroughly.
ii. Some fruits like mango, kiwi, pineapple, and litchi are peeled before heating. Apricots, guava, plums etc are not peeled. Place fruit after peeling in a pan/pressure cooker and boil till softening

Squash is a type of fruit beverage containing at least 25% fruit juice/pulp, not less than 40% total soluble solids (TSS), about 1-1.5% acid and not exceeding 350ppm sulphur dioxide or 600ppm sodium benzoate. Squash is diluted by adding cold/chilled water before serving (1:3).
Mango, orange, lemon, lime, litchi, guava, pineapple, jamun, plum, apricot, rhododendron petals etc., are used for making squash. Potassium metabisulphite (KMS) is generally used as a preservative, whereas sodium benzoate is used as a preservative in squash made from coloured fruits like plum, jamun, phalsa and rhododendron petals.
Recipe: A generalized recipe for the preparation of squashes from different
fruits as a general guideline is as under:

1. INTRODUCTION

Harvesting is the process of gathering the crops from the fields at maturity. The harvesting of a commodity means the end of the growing season for a particular crop. Harvesting is the most labour-intensive activity of the growing season. Harvesting in general includes an immediate post-harvest handling, the actions taken immediately after removing the crop are pre-cooling, sorting, cleaning, packaging and up to the point of on-farm processing or shipping to the wholesaler or consumer.

Harvest timing is a critical decision that balances the likely weather conditions with the degree of crop maturity. Weather conditions such as frost, rain and unseasonably warm or cold periods can affect yield and quality. These conditions can be avoided by harvesting the commodities earlier than the harvest date, but this may result in poor yield and quality. On the other hand, delayed harvesting also results in a better yield, but increases the risk of weather problems. Thus, proper harvesting timings of horticultural commodities often play an important role.

Assessment of harvesting time is a critical time for growers of fruit and vegetables to decide the accurate period of crop harvesting. Fresh produce is normally ready for harvest when it has developed to the ideal condition for consumption and the condition is usually referred to as harvest maturity. Harvest maturity thus refers to the time when the “fruit” is ready to harvest and the time required to reach market. The harvesting should be done earlier than its ideal maturity for proper marketing.

Most growers decide harvesting time for different commodities by looking and sampling. Judgments are based on colour, size and shape (Sight); texture, hardness or softness (Touch); odour/aroma (Smell); sweetness, sourness, bitterness (Taste) etc. Experience is the best guide for this kind of assessment. Harvest maturity can readily be observed in some fruit crops but it can be more difficult in case of some fruits like avocados remain unripe off the tree after maturity.

36.1. Aim

To prepare cordial from lemon and lime.

36.2. Theory

Cordial is a sparkling, clear, sweetened fruit beverage from which pulp has been removed completely. It contains at least 25% fruit juice, 30% total soluble solids (TSS), 1.5% acid and 350 ppm sulphur dioxide. Lemon and lime juice cordials are the commercial products.

36.3. Raw material, ingredients and utensils required

1. Lemon and lime are used for making cordial.